if you want a certain script added, chances are some1 else does too. if you have an idea, or find a script you want added, please either post or PM me. i take a look at this thread alot throughout the day, so i will be able to see your ideas quickly. YOUR IDEAS ARE IMPORTANT
first of all, i did not write this script, i took it from the thread HTC Hero Speedup v2.0 (http://forum.xda-developers.com/showthread.php?t=521421), which was put together by tehseano, who i must thank, however, it seems to only work for Haykuro's Hero ROM
THIS SCRIPT is made to speedup the HTC HERO rom on the g1's. my speedup script is made to work under JACman's. if tried on someone elses, you could brick your phone (although i doubt it), and i will not take responcibility for bricks
trying to use it under JACman 1.72, i couldn't get tehseano's script to work, so im going through a bunch of tweaking and editing for it to work under JACman roms (im guessing twistedumbrella's too).
currently, i'm about to release version 0.2. - released
i have fixed most of the directories and codes except for Battery fix, i have gotten the HTC camera to work, read the readme file
out of curiosity, does any1 have any preference on where i upload the files? want someplace easy and fast, so no rapidshare or anything like that. first working suggestion gets it
please do not use option #8 once it is up, it is not done yet
everything else should be good. this is made STRICTLY for JACman roms, not haykuro's, but twistedumbrella's should work, since it is based off of JACmans
____________________________________________________________________________________________
version 0.2 - http://www.4shared.com/file/113524687/c98398cd/AJZ_HeroSpeed_02.html
very minor changes
fixed the scripts
working on a battery fix
version 1.0 will be more compatible with JAChero 1.8, i expect to release that in the next few day, but this might not be possible because i'm going on vacation
_____________________________________________________________________
I ACCIDENTLY UPLOADED THE BAT AS A TXT FILE. im not gunna change it, so until the next release, just rename the file as a bat
0.1.5: http://www.4shared.com/file/113343120/6c89dd65/AJZ_HeroSpeed_015.html
i must thank dpgc213 for creating the original lockscreen change bat file
Changes:
deleted option to delete pc sync, causes bootloops and doesnt exist
added possibility to change the screen lock image (although doesnt have to do with speed)
added quick directions for changing the lock screen image
____________________________________________________________________________________________
version 0.1 - http://rapidshare.com/files/247165073/hero_speedup_2.0_AJZ_0.1.zip
here's a mirror of 0.1 http://www.4shared.com/file/113320662/7e513586/hero_speedup_20_AJZ_01.html
in version 0.2, expect to see support for the deletion of htc sync, and support for changing your lock screen
can you please include instructions for mac users? thanks good work
did you get it to work with JACman 1.72, you said you would try to tweak it, but did not say if you were successful?
I dont know how to apply the script cuz its made for windows, If some1 put instructions plz?
Franklees said:
did you get it to work with JACman 1.72, you said you would try to tweak it, but did not say if you were successful?
Click to expand...
Click to collapse
i got all the commands and everything working in 1.72 except for #2 to work. #2 will cause a boot loop.
#2 just deletes your htc sync, which idk what it does anyways.
in 0.2, i will try to fix this, as well as add support to change your lock screen
i got the change lockscreen part in, now just gatta see the problem with htc sync
juangil said:
I dont know how to apply the script cuz its made for windows, If some1 put instructions plz?
Click to expand...
Click to collapse
u could try renaming it to something that will work in leopard (er tiger). idk if that would work, im not a mac user. ubuntu and windows
alexjzim said:
u could try renaming it to something that will work in leopard (er tiger). idk if that would work, im not a mac user. ubuntu and windows
Click to expand...
Click to collapse
so if put the optimize.sh file in my sd how do I run it? or is the .bat file the ones that needs to be run? thx
juangil said:
I dont know how to apply the script cuz its made for windows, If some1 put instructions plz?
Click to expand...
Click to collapse
it cant be used for mac users, but basically a bat file just has a bunch of adb commands in it. i can post them for you if you like.
wwwhershcom said:
it cant be used for mac users, but basically a bat file just has a bunch of adb commands in it. i can post them for you if you like.
Click to expand...
Click to collapse
great! that will do it, I appreciate your help
anyone know if HTC pc sync is included in 1.72? if it is, anyone know where it is? once i find this out i can release 0.2.
Wow, this script really made a difference
Henchman said:
Wow, this script really made a difference
Click to expand...
Click to collapse
was aiming for that
juangil said:
can you please include instructions for mac users? thanks good work
Click to expand...
Click to collapse
...Buy a PC lol.
alexjzim said:
was aiming for that
Click to expand...
Click to collapse
When I ran option 3, 6 and 5 in that order without a reboot and then reboot after I did all those I got a bootloop, when I did #5 it was saying success on each one. If I installed dextop-wrapper awhile back like weeks ago do I have to install it again because I didn't install it. I figured I still had it.
jigdagod said:
When I ran option 3, 6 and 5 in that order without a reboot and then reboot after I did all those I got a bootloop, when I did #5 it was saying success on each one. If I installed dextop-wrapper awhile back like weeks ago do I have to install it again because I didn't install it. I figured I still had it.
Click to expand...
Click to collapse
my only suggestion is to wipe and reinstall your ROM, then do everything in order. i cant tell you exactly, because i cant actually see your phone
Okay, thanks I'll try that tomorrow when I get home.
Does this support 1.72 yet?
71CH said:
Does this support 1.72 yet?
Click to expand...
Click to collapse
first of all, i did not write this script, i took it from the thread HTC Hero Speedup v2.0 (http://forum.xda-developers.com/showthread.php?t=521421), which was put together by tehseano, who i must thank, however, it seems to only work for Haykuro's Hero ROM
THIS SCRIPT is made to speedup the HTC HERO rom on the g1's. my speedup script is made to work under JACman's. if tried on someone elses, you could brick your phone (although i doubt it), and i will not take responcibility for bricks
trying to use it under JACman 1.72, i couldn't get tehseano's script to work, so im going through a bunch of tweaking and editing for it to work under JACman roms (im guessing twistedumbrella's too).
currently, i'm about to release version 0.1. - released
i have fixed most of the directories and codes except for uninstalling HTC sync, and replacing the sapphire camera with the official HTC camera. i have gotten the HTC camera to work before, and just need to add in the right codes
out of curiosity, does any1 have any preference on where i upload the files? want someplace easy and fast, so no rapidshare or anything like that. first working suggestion gets it
please do not use option #2 once it is up, it will cause your phone to boot loop - option #2 is now used to change the lockscreen and is completely usable now
everything else should be good. this is made STRICTLY for JACman roms, not haykuro's, but twistedumbrella's should work, since it is based off of JACmans
PC sync is out of all JAChero builds... i spent hours trying to fix something not there . because of this, the next release will be 0.1.5 instead of 0.2
I ACCIDENTLY UPLOADED THE BAT AS A TXT FILE. im not gunna change it, so until the next release, just rename the file as a bat
0.1.5: http://www.4shared.com/file/11334312...Speed_015.html
i must thank dpgc213 for creating the original lockscreen change bat file
Changes:
deleted option to delete pc sync, causes bootloops and doesnt exist
added possibility to change the screen lock image (although doesnt have to do with speed)
added quick directions for changing the lock screen image
__________________________________________________ __________________________________________
71CH said:
Does this support 1.72 yet?
Click to expand...
Click to collapse
Yes.
That's what I'm using ti with. And it's made Rosie completely usable for the first time for me.
Has anyone had the experience where Rosie was really fast when first optimizing using whatever procedure but then lags down over time? That was what I experienced when using a different optimizer. Hopefully this one is consistent.
Related
This is still not a bootable build
update 10/16/09 ------
Qteknology has got it booting to splash screen but its in a bootloop
this amazing progress
everything i do will be based off this work from here on out thans so much Qtek!
ill need to get some information on what exactly he changed but i know
modified build.prop
modified hw folder
modified bootscreen (tattoo one wouldnt play right)
still wont boot all the way waiting to work out a few things before i post a link i also wanna ask him if its ok for me to post a link
THIS BUILD WILL NOT BE FLASHABLE YET IT IS SPECIFICALLY FOR INPUT/Developement ONLY!
Code:
*****!!!!!! DISCLAIMER!!!!!!!*******
This is still not a bootable build
i am not responsible if you try to flash these roms
for any damage that may occur to your device
these are not finished and are not bootable
still in EARLY EARLY EARLY BETA!
This is about where im at right now
closed-10.07.09
Tattoo Only from the WWE 1.65.405.1 build
Merged lib and hw (for sensors) folders with 1.6 doughnut for magic 10/13/09 will try new lib folder idea tonight and report back with logcat and DDMS report
Specific items will be listed later today when i can think of everything
added some stuff in system/bin (super user access etc)
cyanogens 4.1.11.1 kernel and corresponding wlan.ko added (Thank you so much jubeh for the boot.img)
update-script should be super barebones... really just hoping for a boot right now
______________________________________
Update 10/07/09
so Jubeh might be my saviour He packed the Tattooboot.img with cyanogens kernel
A big thanks to: Jubeh(wouldve never got this far without his knowledge),Nk02(for dump used), Drizzy Drake Rogers(is my personal htc hero),Qteknology (you rock man), Jac, Haykuro, Cyanogen, ccyrowski,JF,twizzzzzzted and any others I forgot to mention you guys are great lets keep building a better bot
you cant mixe 2 different builds together, rosie is tied to many apps, so if you were to only try and port the rosie onto a hero build already out, then rosie wont load just your regular laucher!
mixing builds is bad, especially if they are odex!
Drizzy~
I have a night job and I'm getting ready to sleep. Sorry I didn't reply to your last PMs, but the questions are a little involved and I'm very very sleepy. When I have time (maybe later today, or tomorrow, or could be the weekend) I'll try to get a very simple (no a2sd, no compcache, no nonsense, no nothing, just tattoo and root) build working so that people can take it and mod it as they wish. I won't promise anything though, I'm a known procrastinator.
jubeh said:
I have a night job and I'm getting ready to sleep. Sorry I didn't reply to your last PMs, but the questions are a little involved and I'm very very sleepy. When I have time (maybe later today, or tomorrow, or could be the weekend) I'll try to get a very simple (no a2sd, no compcache, no nonsense, no nothing, just tattoo and root) build working so that people can take it and mod it as they wish. I won't promise anything though, I'm a known procrastinator.
Click to expand...
Click to collapse
Id feel alot more accomplished if i can make it work with a small ammount of direction (ill try not to ask REALLY stupid questions hahaha OMFG I BRICKED
coding makes all kinds of sense to me I jsut need to know what points where and where the system starts the read from
starts at kernel and kernel on firstboot compiles my libs and runs scripts once the environment is built from kernel loads framework and apps stuff like that
once that happens you have live system
Drizzy Drake Rogers said:
you cant mixe 2 different builds together, rosie is tied to many apps, so if you were to only try and port the rosie onto a hero build already out, then rosie wont load just your regular laucher!
mixing builds is bad, especially if they are odex!
Drizzy~
Click to expand...
Click to collapse
i knew about the odex thing becuase the odex is SPECIFIC to the build correct? when you add it i think youll get a error like doesnt match stored signature no signature on file ignoring in logcat
i need a NON Odex'd hero like haykuro's and update it all with tattoo stuff and the newest hero apps to fill in where tattoo doesnt cut it
I know rosie is tied in with alot of stuff and when you just try to merge rosie it wont parse properly because it needs the sdk4 to parse the package
THEREFORE! haha i want to make basically 1.6 Rosie with hero apps filling in for the tattoo ones that i dont wanna edit all the drawables in
i want functionality of 1.6 speed of the dumbed down rosie for tattoo and apps from hero i know ill have to cook this and in no way am i asking someone to "just make update.zip so i can flash"
lets limit me to 1 n00b question a day and after a week or so of patience ill prolly have it done
Question of the day: Can I Un ODEX builds or do the ODEX's directly correspond with the apk and are necesary for the apk's functionality i know that dexopt will run at firstboot on odex'd builds but the odex's exist before the dexopt runs right?
yes you can unodex. http://jf.andblogs.net/2009/09/10/slay-those-pesky-odex-files/#more-153
alritewhadeva said:
yes you can unodex. http://jf.andblogs.net/2009/09/10/slay-those-pesky-odex-files/#more-153
Click to expand...
Click to collapse
then ill see if unodex'd tattoo and unodex'd TwiztedZero6.14r3 can play nicely together :-D
sounds like a headache to unodex the whole build
*shoots self in head* this will take almost a week man i need my own computer
the classes.dex items go back into the apks right? (sorry that makes 2 stupid n00b questions today
NEVER MIND SCRATCH THIS WHOLE ENTRY
per mister drakes words
dont mix builds its bad!
so build off this droid i will
ok so last night i compiled the two different ideas weve had
1) Mashed Tattoo's APP/framework and merged the lib folder with TwiztedZerox6.14
2)Tattoo Alone with Cyanogens kernel and bin xbin folders and some build.prop changes for LCD DPI density changed from 120 back to default
On test flash i get the same message from both update scripts
(the update scripts had been pulled from the latest cyanogen update to be used in my build)
problem line 64 Chown perm *some numbers* bin:reboot
on both update zips tried editing the update-script and it still has issues
any ideas anyone?
Zarboz said:
ok so last night i compiled the two different ideas weve had
1) Mashed Tattoo's APP/framework and merged the lib folder with TwiztedZerox6.14
2)Tattoo Alone with Cyanogens kernel and bin xbin folders and some build.prop changes for LCD DPI density changed from 120 back to default
On test flash i get the same message from both update scripts
(the update scripts had been pulled from the latest cyanogen update to be used in my build)
problem line 64 Chown perm *some numbers* bin:reboot
on both update zips tried editing the update-script and it still has issues
any ideas anyone?
Click to expand...
Click to collapse
in /system/bin from system.img there is a toolbox symlink "reboot" ? if there is, you have to remove it (because all symlink must be create during installation, as write in update-script)
its actually easy to edit the script ... check every line and try to see! what it is doing , you shouldn need xbin at all, remove all lines about it for now, no busybox nothing
as nk02 said remove all links (do you use linux ?) and then your script hould copy system and data , make a symlink for app_s and change some permissisons that's it.
so clean upp the script , and make your own. I will pst one for you here , make sure you have all files in your system ...
shwan_3 said:
its actually easy to edit the script ... check every line and try to see! what it is doing , you shouldn need xbin at all, remove all lines about it for now, no busybox nothing
as nk02 said remove all links (do you use linux ?) and then your script hould copy system and data , make a symlink for app_s and change some permissisons that's it.
so clean upp the script , and make your own. I will pst one for you here , make sure you have all files in your system ...
Click to expand...
Click to collapse
thanks started using textpa and now my update scripts are fine got the hero+tatto mashup to boot but its giving me all kinds of odex issues
im gunna have to find a UN odex'd hero to mash it with and un odex the tattoo build
havent worked on the ONLY tattoo with cyanogens kernel yet i got busy and i dont have a tester phone just my mytouch and i cant go more than 3 hours with out being able to use it haha
no im not on a linux machine i am still getting comfortable with command line functions and have been doing nothing but reading the android developers page and anything linux related on the internet
my betas are uploading right now neither will boot one boots enough to get into logcat but because i mashed the odex'd builds together i know i know im a bum and i didnt wanna deodexarnt the whole thing (take time to do it right and never do it twice)
next on my list of things to try
get unodex'd hero build and unodex tattoo then mash
see if i cant just get straight tatoo to boot then trim the resolutions of the rom to fit on our 32b devices
any input is greatly appreciated
Zarboz said:
thanks started using textpa and now my update scripts are fine got the hero+tatto mashup to boot but its giving me all kinds of odex issues
im gunna have to find a UN odex'd hero to mash it with and un odex the tattoo build
havent worked on the ONLY tattoo with cyanogens kernel yet i got busy and i dont have a tester phone just my mytouch and i cant go more than 3 hours with out being able to use it haha
Click to expand...
Click to collapse
You can use my Hero build, it's unodexed.
maxisma said:
You can use my Hero build, it's unodexed.
Click to expand...
Click to collapse
wouldnt i need to unodex tattoo as well to ensure that they will work together?
i assume yes since the whole build would be unodexed
**edit**
wich one your new drizzy stuff or the old one thats in sapphire forums
yes would be need to unodexed too.
Can anyone deodexerant the tattoo dump I have no Linux machine
Zarboz said:
Can anyone deodexerant the tattoo dump I have no Linux machine
Click to expand...
Click to collapse
virtualbox ?
Help!
I am willing to help with the Deodex if I can, I already started doing something similar to you but against the latest Cyanogen experimental build which is already Donut.
I am trying to Deodex Tattoo but am struggling, I am trying to get my head round what we need to do to deodex it.
According to the readme of deodex you need to have the phone running the exact firmware you want to deodex (I don't have a Tatoo or know anybody who does), or use a CH Root environment to do it.
This is where I get stuck, are they on about a CH root environment on our phones or within my Unbuntu environment (it is not very clear)? Can somebody give me a clue or even better instructions on the CH root process required to use Deodex?
Thanks
James
james194zt said:
I am willing to help with the Deodex if I can, I already started doing something similar to you but against the latest Cyanogen experimental build which is already Donut.
I am trying to Deodex Tattoo but am struggling, I am trying to get my head round what we need to do to deodex it.
According to the readme of deodex you need to have the phone running the exact firmware you want to deodex (I don't have a Tatoo or know anybody who does), or use a CH Root environment to do it.
This is where I get stuck, are they on about a CH root environment on our phones or within my Unbuntu environment (it is not very clear)? Can somebody give me a clue or even better instructions on the CH root process required to use Deodex?
Thanks
James
Click to expand...
Click to collapse
take my tattoo only build unzip it and take the update script delete the line about system:xbin save and resign then flash this will load the android environment through cyanogens shell for the tattoo i just dont know if it will display anything on the phone itll probably have a bunch of errors in logcat
i just havent gotten this far yet because i dont have a phone that i can flash just to test stuff all i have is my mytouch and i cant afford to be without it for very long and i dont know how to boot custom roms on emulator nor do i think we can boot this due to htc parts missing from the SDK
next on my list to try....
*****************
-get virtualbox up and going and deodexarnt the tattoo build (i think itll boot enough to get dalvik manager to run so we can deodex it)
-once deodexed i would like to see if i can get this thing to boot standalone (if the standalone i have now will boot {not been able to test yet like ive said no device to test with} if the standalone is being a big pain in the [email protected]# and not booting properly or we have issues with screen size differences ill have to stop because my knowledge of these things is limited..)
we cant deodex tattoo without being booted into tattoo
so
oh well for that
lets work on getting original tattoo to boot so we can deodex and build off it
if anyone has started to do these things or is already in the process of doing these things please let me know
Zarboz said:
next on my list to try....
*****************
-get virtualbox up and going and deodexarnt the tattoo build (i think itll boot enough to get dalvik manager to run so we can deodex it)
-once deodexed i would like to see if i can get this thing to boot standalone (if the standalone i have now will boot {not been able to test yet like ive said no device to test with} if the standalone is being a big pain in the [email protected]# and not booting properly or we have issues with screen size differences ill have to stop because my knowledge of these things is limited..)
we cant deodex tattoo without being booted into tattoo
so
oh well for that
lets work on getting original tattoo to boot so we can deodex and build off it
if anyone has started to do these things or is already in the process of doing these things please let me know
Click to expand...
Click to collapse
went through about 15 flashes last night
none booted
the furthest i got the logcat is posted on the OP
i have two more ideas but i need someone to pack my boot.img for me for one of them (i know i should have my own linux machine but im not about to download anything over 100 megs on my tether SLOW!)
and the other ill work on tonight and see if i cant get it to work
So I have a bootable Tattoo build. is that all you need? Different phone but I don't see why it matters. I can unodex but I don't see the point... Tattoo and Hero share a lot of apps and functionality. All I see are cosmetic changes, which I'm working on as well. But, if you tell me what to run I can have it posted within the hour.
I'm not sure what you're really trying to do by backporting to Cupcake based Hero. I can unpack the boot.img, unodex Tattoo, whatever but I don't see what you want to accomplish with this. I don't have your phone so I can't test whether the kernel would work if I mod boot.img for you but it doesn't sound hard. Got the tools in my PATH.
MotoBlur 0.2 for HTC Magic 32a
Extremely experimental, try at your own risk, no support offered at all.
This was taken from Drizzy's earlier BetaBeta that I had a play with a few days ago and decided I might as well release it - he's added dream fixes, but not much of it applies to us so far from what I can see so haven't bothered updating it. Thanks should go to Drizzy for his work on getting this to start with tho!
It was a quick repack I made just to have a play with it and see what it was like - so I've added little to it.
Update: 0.2 now with a BFS303 kernel
If something's broken, don't expect me to fix it - my knowledge of the internals of it all is pretty small, but if you know HOW to fix it, feel free to let me know and if its' worthwhile I may even package it again
What's not working:
Wireless
Bluetooth
Laggy initially when the MotoBlur setup is running, but it speeds up once it's finished syncing.
Enjoy!
Downloads
MotoBlur 0.1 for 32a FULL INSTALL from:
http://www.megaupload.com/?d=DBJIDJAU
MotoBlur 0.2 for 32a UPDATE only!
(ie. you still need to install 0.1 first, then apply this!):
http://www.megaupload.com/?d=TFW1LR3Y
Enjoy!
I might try it just for checking it out. But wont just jump the wagon now that you don't seem to dedicated to make updates for it
Anyway thanks for sharing!
Just flashed it and it boots fine
Too bad that it looks like i cant connect to motoblur's servers. I get an error which is something like "blur service seems to be busy" and i'm not able to register:\
can someone port it for 32A the rom made by Drizzy at the dream forum. He seems to able to fix many things. http://forum.xda-developers.com/showthread.php?t=557982
It's not that I dont' want a working rom - I'm just new to this and don't know how to fix all of it without a lot of trial and error
As for Drizzy drake - his one hasn't really fixed the main problems much either - which are wifi/bt and speed.
I really rushed with 0.1 - hadn't realised this wasn't cupcake and was donut and that gives me a bit more incentive to fix it.
I've started on a 0.2 release with a BFS 303 kernel, working modules, xbin and if I can, wifi working - will let you know if/when I am successful.
Let me know if you see any easy fixes in here - I'm still learning my way around a rom like this and would appreciate any help.
Cheers,
Radix999
Thanks a lot for posting the rom! You made my day!
I really see a big potential in the MotoBlur OS, it just need speed and wifi
Hope you can get it fixed
Sorry i'm a bit confused here, maybe i missundestand something but in your first post you write:
And I don't even remember which kernel I put in.. think it was a 2.6.27 one as this is cupcake not donut.
Click to expand...
Click to collapse
but in 2nd post:
Hadn't realised this wasn't cupcake and was donut and that gives me a bit more incentive to fix it.
Click to expand...
Click to collapse
Can you please clear out my confusion
Radix999 said:
MotoBlur 0.1 for HTC Magic 32a
Extremely experimental, try at your own risk, no support offered at all.
It was a quick repack I made just to have a play with it and see what it was like - so I've added little to it.
I forget where I got this from, and I don't even remember which kernel I put in.. think it was a 2.6.27 one as this is cupcake not donut. I was asked to upload this just so other ppl could play.
If something's broken, don't expect me to fix it, but if you know HOW to fix it, feel free to let me know and if its' worthwhile I may even package it again
Enjoy!
Download 0.1 from:
http://www.megaupload.com/?d=DBJIDJAU
Click to expand...
Click to collapse
I cant open this url. a mirror please?
This is an update to the above rom - just updates the kernel to 2.6.29-6-BFS303.
It improves the experience a bit, but it's still very sluggish and I've not been able to get wifi/bt working:
Just download the update.zip below and apply on top of an existing motoblur 0.1 install:
MotoBlur 0.2 for 32a update:
http://www.megaupload.com/?d=TFW1LR3Y
If anyone can help me
a) mount the sqf files correctly,
b) work out what's wrong with wlan and BT
I'd appreciate the help!
nubcake said:
Just flashed it and it boots fine
Too bad that it looks like i cant connect to motoblur's servers. I get an error which is something like "blur service seems to be busy" and i'm not able to register:\
Click to expand...
Click to collapse
like you
Radix999 said:
MotoBlur 0.2 for HTC Magic 32a
Extremely experimental, try at your own risk, no support offered at all.
It was a quick repack I made just to have a play with it and see what it was like - so I've added little to it.
Update: 0.2 now with a BFS303 kernel
If something's broken, don't expect me to fix it - my knowledge of the internals of it all is pretty small, but if you know HOW to fix it, feel free to let me know and if its' worthwhile I may even package it again
What's not working:
Wireless
Bluetooth
Laggy initially when the MotoBlur setup is running, but it speeds up once it's finished syncing.
Enjoy!
Downloads
MotoBlur 0.1 for 32a FULL INSTALL from:
http://www.megaupload.com/?d=DBJIDJAU
MotoBlur 0.2 for 32a UPDATE only!
(ie. you still need to install 0.1 first, then apply this!):
http://www.megaupload.com/?d=TFW1LR3Y
Enjoy!
Click to expand...
Click to collapse
Please 32b!!!!
I'm just wondering - would wifi work if I flashed MotoBlur 0.2 and then flashed the newest kernel for CM ?
neojonax said:
Please 32b!!!!
Click to expand...
Click to collapse
Take a look at the one over at the Dream forum - http://forum.xda-developers.com/showthread.php?t=557982
Briix said:
Take a look at the one over at the Dream forum - http://forum.xda-developers.com/showthread.php?t=557982
Click to expand...
Click to collapse
Ok,THANKS!!!!!
Briix said:
I'm just wondering - would wifi work if I flashed MotoBlur 0.2 and then flashed the newest kernel for CM ?
Click to expand...
Click to collapse
They should be the same except for the ramdisk really.. I used the same kernel I compiled for CM 4.1.999 w/ BFS303
I guess you could always try it and if no luck then flash my 0.2 update afterwards
Thanks it's working
Thanks, it's working on my magic. (v0.1) I like to see how Motorola made it. I really enjoy.
BTW, how can I switch it off?
It does not respond to red Power switch. I saw Motorola's android phone had fewer switches.
I will "adb sync" few times, and pull out the battery...
and I will apply v0.2 after download.
Damm, i tried to flash it again.
I still get the following error whenever i try to register a MOTOBLUR account:
"The Blur service has indicated it is busy".
May it be that they are blocking my region or my mobile operator blocking any connection to their servers? These are the only things i can think about
setupr said:
BTW, how can I switch it off?
It does not respond to red Power switch. I saw Motorola's android phone had fewer switches.
Click to expand...
Click to collapse
Haha.. yeah, I did that too - I discovered that you can also use adb shell and 'toolbox reboot' to turn the phone off.
The Cliq has no end call button, hence why it's not assigned to do anything.
nubcake said:
Damm, i tried to flash it again.
I still get the following error whenever i try to register a MOTOBLUR account:
"The Blur service has indicated it is busy".
May it be that they are blocking my region or my mobile operator blocking any connection to their servers? These are the only things i can think about
Click to expand...
Click to collapse
I managed to sign up a couple of days ago when I first created this rom - but I think too many people have signed up and their phones aren't even out yet so they've blocked new users from signing up or something - I dunno.
Radix999 said:
Haha.. yeah, I did that too - I discovered that you can also use adb shell and 'toolbox reboot' to turn the phone off.
The Cliq has no end call button, hence why it's not assigned to do anything.
Click to expand...
Click to collapse
Haha. I was checking the Dream forum - http://forum.xda-developers.com/showthread.php?t=557982 . They are same situation.
Someone was writing about [Home]+[Menu]+[Power] switches. Is this "Reset" or "Shutdown"? If it is "Reset", it is same like "pull out the battery"....
Also, does "toolbox reboot" shutdown system properly? at least, I expect it does sync file system.
I did in adb shell "toolbox reboot", while pressing [Home] switch. It did not reboot but switched off.
How to switch off with Motorola Cliq ? There must be a proper way of shutting down the system.
Radix999 said:
I managed to sign up a couple of days ago when I first created this rom - but I think too many people have signed up and their phones aren't even out yet so they've blocked new users from signing up or something - I dunno.
Click to expand...
Click to collapse
In the Dream forum, there was a post http://forum.xda-developers.com/showthread.php?p=4677405#post4677405
jaygajay said:
> Is't it possible to jump over Blur account to Homescreen?
You have to delete Setup.apk
If you have adb installed on ur computer plug in your phone and do
Code:
adb root
adb remount
adb shell rm -r /data/app_s/Setup.apk
adb shell reboot
Click to expand...
Click to collapse
The end button issue I think has been resolved by Twisted over the dream forum as mentioned by Drake in Moto v0.5 change log, Can someone install that fix and confirm.
!!THIS NAVIGATION IS !!ONLY!! FOR THE USA!!
!!Paid apps work!!
Facebook has now been removed!!
Release Name:update_navigation.zip
Release Version:FINAL
MD5 Sum:N/A (verified working)
Credits:See below
Base Firmware:1.6
Radio Required:N/A
SPL Required:N/A
Partition Layout:N/A
Wipe Required:N
Special instructions:See below
Download:See attachment or, 4shared link
Hey guys,
After a longs day of work, I got it.
Put together a recovery flash-able zip file to add the new Google navigation.
REQS:
1. Dream or Sapphire/Magic/Mt3G
2. 1.6 Rom as a minimum
3. Custom recovery either Amon's or Cyanogen's
4. A brain
5. The download at the end of the post
STEPS:
1. Download this for most Donut builds (Cyanogen based). (also attached now )
2. Place in the root of your sdcard
3. Reboot in recovery
3. Select chose update.zip (or rename the downloaded file to update.zip)
4. Select update_navigation.zip
5. Reboot
Extended steps:
If "Navigate" doesn't show up the first time:
1. Go to settings
2. Click on applications
3. Click on Manage applications
4. scroll to apps
5. click on Maps
6. Clear data
OR
1. Install Google Voice
2. Uninstall Google Voice
3. Reinstall Google Voice
****MOST IMPORTANT PART****
Thanks:
Cyanogen and Amon for their recovery images.
followinginsanity for his updates to build props
community for helping test and get it goooinnggggg!!
clyde8 for the better build string
Brut.al for the (possible) navigation out of USA!
Donation shout-outs:
Suma Software Inc
If you actually feel like donating to my trip fund go ahead and click here!!
!THANKS!
AND ENJOY
Q&A
Q: Navigation is not showing up!
A: you must first "get directions" for the option to show up, it is in that pane
A: MAKE SURE YOU ENABLE GPS!!!
Q: Why was facebook removed??
A: it caused to many issues, and the market one works fine.
Q: What is the latest changes??
A: I removed the build.prop file completely in hopes that it will work without it, did for me... you tell me
Q: What took so long?!?!
A: I had H1N1, b|0W me.
Q: Does this work with AOSP?
A: doesn't look like it, at least not so far, I did adjust some build props right from them but never got any feedback to let it out to the masses.
Q: Does this break CM-Updater?
A: No, it shouldn't.
Q: Do i need to reflash this every time?
A: if you want navigation, yes. Every update reverts the build props back to the old ones.
Q: Does this work outside of the USA?
A: Yes. BUT BUT BUT BUT BUT BUT BUT BUT BUT YOU MUST FOLLOW THESE DIRECTIONS EXACTLY!
1. First navigate between 2 USA addresses (just enter them in to get the navigate option to show up)
2. Make a shortcut on your home screen with the address you want to navigate to.
3. Make sure turn by turn is checked.
4 click it nub.
5. drive to the location
6. brag "o mai android is wai b3tt3r thian UR ip0ne."
7. hope to god it brings you back home, otherwise buy a map.
If your paid apps are not working, either wait until midnight, for caches to clear, or flash from scratch...
IE: recovery - rooted cyano - Cyano update - navi update
(p.s not responsible if you drive over a bridge following the GPS, that's stupidity)
(p.p.s don't brick your shaz and blame me or anyone else for that matter, you blew it)
Im trying it now will get back to you
nick8197 said:
Im trying it now will get back to you
Click to expand...
Click to collapse
just for s&g are you a dream, and what Cyanogen are you running...
just want to get as much info as possible
Im on a dream/g1
Im using dwang with theme
do you think it will work I havent done it yet
will test as soon as my slow internet loads
how exactly does this one work? meaning what exactly does it change? does it still affect the build.prop and build.trout.prop, or will it work on its on?
nick8197 said:
Im on a dream/g1
Im using dwang with theme
do you think it will work I havent done it yet
Click to expand...
Click to collapse
i do believe so...
the only way it won't is if i mis-edited the build.trout.prop
but we'll know in a bit!!
alexjzim said:
will test as soon as my slow internet loads
how exactly does this one work? meaning what exactly does it change? does it still affect the build.prop and build.trout.prop, or will it work on its on?
Click to expand...
Click to collapse
unfortunatley yes, it still edits the buildprops and what not....
it should work on anything 1.6+ by anyone.....
i think
theomajigga said:
unfortunatley yes, it still edits the buildprops and what not....
it should work on anything 1.6+ by anyone.....
i think
Click to expand...
Click to collapse
i tried one...not this one.. but what happen is that handcent dosent locate contacts.. due to those builds being moved..and handcent is a popular sms app so im waiting for someone to flash this then run handcent!
mrnv45 said:
i tried one...not this one.. but what happen is that handcent dosent locate contacts.. due to those builds being moved..and handcent is a popular sms app so im waiting for someone to flash this then run handcent!
Click to expand...
Click to collapse
I'm going to look into that becuase i use handcent also...
this is just for the community, and me once i get that build stuf figured out...
just downloaded and am about to try it now. Nav was running great till i updated to 4.2.4. figure it reinstalled the build.prop. give me a sec and will let you know
theomajigga said:
unfortunatley yes, it still edits the buildprops and what not....
it should work on anything 1.6+ by anyone.....
i think
Click to expand...
Click to collapse
alright. i just wanted to see if we could have gotten that nice looking facebook app working alongside this. got a couple ideas.., give it a try when im done with my honors stuff. pretty behind. staying on XDA all night
mrnv45 said:
i tried one...not this one.. but what happen is that handcent dosent locate contacts.. due to those builds being moved..and handcent is a popular sms app so im waiting for someone to flash this then run handcent!
Click to expand...
Click to collapse
I had the exact same problem, I just pushed the old build.prop and build.trout.prop back to my phone and reboot and now handcent shows the right info and navigate is still there. Here's to hoping it stays!
waygeekierthanu said:
I had the exact same problem, I just pushed the old build.prop and build.trout.prop back to my phone and reboot and now handcent shows the right info and navigate is still there. Here's to hoping it stays!
Click to expand...
Click to collapse
rumor has it that nav will disappear though with the old buildprops back on...
P.S @ 50 download i'm cutting it off, want to make sure its working properly,
after some feedback i'll put it back up!
theomajigga
any lucc on the handcent?
Soo by putting this on my phone, will it mess up my handcent?
mrnv45 said:
theomajigga
any lucc on the handcent?
Click to expand...
Click to collapse
working on it now
alright i see the prob i think. as far as build props anyway. the only thing that needs to be changed is this line
ro.build.fingerprint=verizon/voles/sholes/sholes:2.0/ESD20/17572:user/ota-rel-keys,release-keys
the rest can stay the same.
this should play nice with other apps, and allow the new facebook as well.
edit: in this line would need to be modded in build.trout.prop for the dream and build.sapphire.prop for the sapphire
also note that you can mod the line in both and leave them in the update. cyan's roms use all 3 build props. but reads from the trout or sapphire depending on which phone it is installed on, since his roms can work on both.
working great on my wifes G1
followinginsanity said:
alright i see the prob i think. as far as build props anyway. the only thing that needs to be changed is this line
ro.build.fingerprint=verizon/voles/sholes/sholes:2.0/ESD20/17572:user/ota-rel-keys,release-keys
the rest can stay the same.
this should play nice with other apps, and allow the new facebook as well.
Click to expand...
Click to collapse
Made the change to the file. waiting for my test...
theomajigga said:
Made the change to the file. waiting for my test...
Click to expand...
Click to collapse
as soon as i get a confirmation that running this keeps handcent up lol you will become god lol..
Android 2.0.1-r5v0.6
Dead:
==============
After spending some time and looking over this rom and ways to make it work with out any legal issues. The most viable option was to build something like what cynanogen has built. His process takes the proprietary bits (all google apps including sync) and copies them off onto the SD card before doing a update. After the update it copies them back to the newly installed rom. This method basically does a automated backup/restore of your licensed applications. I can't do this for several reasons including that we are supposed to be coming from a 1.5 OS to a 2.0.1, which isn't compatible with the older application set.
Temporarily Offline:
==============
I am sorry to have to do this but we are now having more then just a small handful goofing with this ROM and I need to take this offline while I inspect each of the parts and make sure all licensing is in order since its a bit more then the google Opensource framework. I know that several other ROM creators have not paid much attention to it as I am going to now but I really don't want to upset any IP holders like what happened to Cynanogen a couple months back.
I will put it back up but I want to make sure that I am totally covered and don't have any issues.
version 0.6: download (offline)
==============
-fixed wifi thanks to http://forum.xda-developers.com/showthread.php?t=593620
-Now starts up with Android stock keyboard. (No longer needs HTC_IME.apk for second keyboard)
A few have asked for this ROM so I thought I would put it up here for anyone that wants to contribute to or take from it.
This ROM is only compatible with the Sprint CDMA HTC Hero. It is not finished and still requires some work but its good enough for my day to day use and I am sure others may find the same potential.
This ROM is vanilla android and what it takes to actually get it running on a CDMA phone. It is built off of this GSM variant. I am going to try and work to remove the google bits so that you can use Cynanogens method of extracting your own and then doing a follow up update to install them. My efforts for this is not to build a better rom but to build a cleaner base that has limited to no proprietary IP.
Credits to all on this forum how have helped or contributed in any way to building the roms that are here. I would point out names but there are to many to name. I am positive that anyone that pays attention to this forum will know who you are. I used many parts of these ROM's and many others on XDA to build this one.
This is my first ROM and was primarily made for myself to help me learn how to create a custom ROM.
Here is the link to my blog where I originally posted about this and a video of it booting.
Here is the Youtube video of it booting: http://www.youtube.com/watch?v=tRTh-rXKe-E
*Warning*: Don't attempt to flash this ROM onto anything else unless you know what you are doing! I am not responsible for any device malfunctions or "Bricks".
Notes on Installing:
- Run a Nandroid backup before you do anything.
- Make sure you do a full wipe first. (Sorry )
- Run the update zip found * Version 0.6 *(offline) from the recovery console.
To get the HTC keyboard installed: (Now Optional as of Version 0.6)
- Follow the instructions here.
Things that don't work:
- Gallery some times has issues.
- Camera
- Wired or Wireless Tethering (Now Testing)
- Orientation
- Trackball light
- Trackball click (Rolling and moving are fine)
- (Let me know if something else needs to go here.)
Possible issues that are not repeatable:
- speaker not working on out bound calls? I made 30 test calls to my home phone and was not able to replicate this issue. Needs to be verified (see here)
Awesome! Thanks! disregard my PM lol.. Great timing.
VoXHTC said:
Awesome! Thanks! disregard my PM lol.. Great timing.
Click to expand...
Click to collapse
LOL I was just getting to replying to you!
im trying it now nice work
Let me know if any of you have issues flashing. I still have it all right here in front of me if I need to make a change.
FYI: The first boot takes for ever as it registers all the APKS.
i just get the HTC_IME fource close i installed the one from the site like you said and installed it and i get this
thorracing1 said:
i just get the HTC_IME fource close i installed the one from the site like you said and installed it and i get this
Click to expand...
Click to collapse
So you installed both the HTC_IME.apk and the Clicker.apk? Did you do a adb push or a adb install?
Try and go into settings --> Language & Keyboard --> Touch Input --> Text Input?
I think its a force of habit with out really thinking to go there and calibrate but just going there may help.
Try that and let me know.
i just flashed it and pushed the keyboard and calibration app through adb and all is well. its working awesome. Thanks!!!
2.0t03speed said:
i just flashed it and pushed the keyboard and calibration app through adb and all is well. its working awesome. Thanks!!!
Click to expand...
Click to collapse
Awesome, keep the feed back coming as you have it!
please take note orientation doesnt work. please put in first post.
otherwise, great work!
should i do adb install or adb push?
blankd3ckskat3r said:
please take note orientation doesnt work. please put in first post.
otherwise, great work!
Click to expand...
Click to collapse
Got it listed now, that one bugs me... Must have been to worried about building this to remember it.
BTW thanks for the feed back!
thorracing1 said:
should i do adb install or adb push?
Click to expand...
Click to collapse
I would do an install or transfer them to your SD card and grab a app like Astro from the market to install them. Don't worry we will get you worked out.
dchadwick said:
Got it listed now, that one bugs me... Must have been to worried about building this to remember it.
Click to expand...
Click to collapse
lol well its a common problem, cant wait for a fix. really like what you did with this build
dchadwick said:
I would do an install or transfer them to your SD card and grab a app like Astro from the market to install them. Don't worry we will get you worked out.
Click to expand...
Click to collapse
Not able to get a working Keyboard Now I'm stuck in a boot loop. Tried installing through droid explorer.. no go.. tried installing from astro ..no go.. now it loads lockscreen.. dead... reboot..rinse and repeat
removed SDcard.. boots now trying to push.. but where do I push the apk files to?
blankd3ckskat3r said:
lol well its a common problem, cant wait for a fix. really like what you did with this build
Click to expand...
Click to collapse
Thanks, but I really can't take to much credit. Its a "Pick and Pull" from several ROMs. This one actually came from our GSM Brothers and then I used the CDMA tricks in this form to make it work.
I keep watching and playing with the Google Nexus Dumps. I would really like to get one of them up and running.
Based on your posting and replies I assume you are re-using the 2.6.27 kernel like the other roms?
VoXHTC said:
Not able to get a working Keyboard Now I'm stuck in a boot loop. Tried installing through droid explorer.. no go.. tried installing from astro ..no go.. now it loads lockscreen.. dead... reboot..rinse and repeat
Click to expand...
Click to collapse
Wow thats allot in a little space.
What I gather is that it originally booted, then after trying to install via droid explorer and then astro it now just dies after the lockscreen.
I am not sure where to start. I would just say to do a full wipe, then a clean install. Then if you have the sdk try the ADB install method as Cynanogen's post talks about.
I am working on trying to get the stock Android keyboard to work. If we can figure out that then we don't have to mess with the HTC one.
ok i got it i just adb pushed them to system/app works great
obelisk79 said:
Based on your posting and replies I assume you are re-using the 2.6.27 kernel like the other roms?
Click to expand...
Click to collapse
Yeah, actually some of your work if I remember correctly, thats why its got the same issues. My first goal when I built this for my self was to get past the blasted google bits sync loop. The more I worked into it the more I moved on to the 2.0.1 build with some of your stuff in it.
Your welcome to anything I have learned, its really not my work.
2708 kernel only!FR-customMTD is needed for G1 of at least 94Mb systemI give to you my leaving present....it seems to be fully working,no lag and everything working..All i did was add some files,delete some,change some bits in the build.prop and in the updater script.
My phone will be gone from tomorrow so i provide no support,no updates and am not responsible for any broken phones etc etc...
The name....
Called EZ FRankenCYAN because its a bit of all their work therefore i take NO CREDIT! All i did was use bits and pieces from each of their efforts.
By the way i did it all on my Magic so big thanks to Astro File Explorer!!
I have been using this for the last couple of days and get a respectable 4.4+ linpack scores,Please enjoy as i have and as the new phones owner will.
Thanks to EzTerry, FireRat and CYANogen team.Hopefully i wont annoy anyone by putting this up!
Im now off to the Hero Section again to goodbye for now!
Usual stuff,wipe before you flash backup etc
DOWNLOAD HERE!
SIGNED DOWNLOAD
I should add that the onpy reason i have posted this is because i didnt want to feel guilty for not sharing...If i was keeping my phone i would go with Ezterry and Firerats rom as its goign to be amazingly fast and clean! I noticed when doign this that the CM coding in files seems quite dirty,as well as EZ/FR having an autoinstaller for various kernels when you flash.
Stick with the newer developers i have a feeling they will support longer than whoever takes over Cmod!
SEE POST 7 FOR FLY ANIMATION! THANKS TO JUANGIL
thanks for sharing, will give it a try
edit 1: you need to mention that FR-customMTD is needed for G1 of at least 94Mb system (thanks)
edit 2: it is indeed Fast, tested with and without compchache and I see no diff, I'll replace ADWLauncher with Launcher2 to see if still as fast as now (I dont want to say it but it feels faster than ezterry's) I even added Fly Animation and it feels faster "foreals"
edit 3: using Launcher2 now and compcache @32mb Jit on, best combination till now, first GB rom I got where LCD density changer works (130/140 looks cool!) this rom can handle the transition animation really snappy
i couldnt flash it. the zip could not be opened or something :s
Could you explain how you got the Cyanogenmod parts into this otherwise stock ROM? I would use EzTerry / Firerat's Gingerbread ROMs, but I really miss the dropdown power widget and the battery percentage. All the rest I could live without.
sb56637 said:
Could you explain how you got the Cyanogenmod parts into this otherwise stock ROM? I would use EzTerry / Firerat's Gingerbread ROMs, but I really miss the dropdown power widget and the battery percentage. All the rest I could live without.
Click to expand...
Click to collapse
if you want I can upload my rom with added fly animation, launcher2 and some bits, or just flash the one from OP and try it, it has CMparts build in
juangil said:
if you want I can upload my rom with added fly animation, launcher2 and some bits, or just flash the one from OP and try it, it has CMparts build in
Click to expand...
Click to collapse
I am curious to try this out. I downloaded the ROM from the OP but when I went to flash it I also received an error that e:\ bad zip. Does the ROM require custom MTD as stated by Bonesy? If it does require MTD, what are your settings? Also how is the gmail issue with the ROM, does it loop or is all OK?
flyers00 said:
I am curious to try this out. I downloaded the ROM from the OP but when I went to flash it I also received an error that e:\ bad zip. Does the ROM require custom MTD as stated by Bonesy? If it does require MTD, what are your settings? Also how is the gmail issue with the ROM, does it loop or is all OK?
Click to expand...
Click to collapse
it DOES require customMTD as STATED, no problem with Gmail, it has the power widgets on pulldown bar, No battery porcentage
my settings for MTD; 98 1.5 (I have 3.9Mb free after adding animation to framework and Launcher2 to system)
edit: forgot to mention Im using FR-customMTD-v1.5.8 beta (recovery & boot) from here:
http://forum.cyanogenmod.com/topic/13607-how-to-custom-mtd-partitions-12302010/
edit 2:
I attached framework with fly anim for you to try
push it to /system/framework/framework-res.apk and reboot
juangil said:
it DOES require customMTD as STATED, no problem with Gmail, it has the power widgets on pulldown bar, No battery porcentage
my settings for MTD; 98 1.5 (I have 3.9Mb free after adding animation to framework and Launcher2 to system)
edit: forgot to mention Im using FR-customMTD-v1.5.8 beta (recovery & boot) from here:
http://forum.cyanogenmod.com/topic/13607-how-to-custom-mtd-partitions-12302010/
Click to expand...
Click to collapse
Thanks for the quick response. I am going to up my MTD partition size from 87 2 to your settings and give it a shot. The battery percentage isnt a showstopper for me. I will let you know how it goes after changing the settings.
juangil said:
it DOES require customMTD as STATED, no problem with Gmail, it has the power widgets on pulldown bar, No battery porcentage
my settings for MTD; 98 1.5 (I have 3.9Mb free after adding animation to framework and Launcher2 to system)
edit: forgot to mention Im using FR-customMTD-v1.5.8 beta (recovery & boot) from here:
http://forum.cyanogenmod.com/topic/13607-how-to-custom-mtd-partitions-12302010/
edit 2:
I attached framework with fly anim for you to try
push it to /system/framework/framework-res.apk and reboot
Click to expand...
Click to collapse
I appreciate the helpful suggestions but for some reason I keep getting e:\ cant open /sdcard/ezfranencyan. (bad) installation aborted
Bummer, I tried to install the CMsettings apk files from CM7 beta onto my EzGingerbread alpha system, doesn't work.
sb56637 said:
Bummer, I tried to install the CMsettings apk files from CM7 beta onto my EzGingerbread alpha system, doesn't work.
Click to expand...
Click to collapse
and.. why are posting this here?
and... you are proly missing settings.apk & settings.provider.apk if Im not mistaken
and.. if you also want the slide to answer lock you'll need phone.apk & Contacs.apk aswell
and... CMparts.apk of course
fyi, the rom posted here already includes CMparts.apk with most of features working
juangil said:
and.. why are posting this here?
Click to expand...
Click to collapse
Because bonesy (the OP) is the only one who seems interested in mixing CM and stock Gingerbread.
juangil said:
and... you are proly missing settings.apk & settings.provider.apk if Im not mistaken
and.. if you also want the slide to answer lock you'll need phone.apk & Contacs.apk aswell
and... CMparts.apk of course
Click to expand...
Click to collapse
And no, I did install CMparts.apk, settings.apk, and settings.provider.apk. It worked in the sense that it showed the Cyanogenmod settings and let me change them, but it didn't actually do anything. And then after reboot they disappeared.
It doesnt wok like that i used the CM7 port as the base then added in some of ezterrys parts, this file isnt signed as i made it on my magic with NO PC its a shame ive sold my magic now i would like to continue
What download server did u all use? megaupload AND rapidshare give me a bad zip..
I would like to try it.
bonesy said:
What download server did u all use? megaupload AND rapidshare give me a bad zip..
Click to expand...
Click to collapse
I used both megauload and rapidshare, in both cases I also got a bad zip
So it would sem they uploaded bad to them,try the others...sorry
cant seem to get a good zip
Strange that juangil got a good one? When i get to my laptop ill redo and reupload with MD5 sum
It's the fastest GingerBread I've ever seen... But There is one small bug. I'm from poland (you can see it on every my post- language problems )... I'm from Poland and I see, that keyboard layouts don't match (what I type on hardware keyboard don't match what I get. I mean this: [email protected]#$%^&*()_[];',./-=\ signs...). Is there any fix for that? And where is the "?" sign?
Bad zip is caused by wrong digest (signature) of the package. I've had the same. Sign it and it would be ok