I had an issue with TomTom and had to do a factory reset on the device. I just thought I'd post the instructions for those who might need to perform this actions.
With the device turned off, press and hold the TALK/SEND, END and POWER buttons until you see a message on the screen. Release the TALK/SEND, END and POWER buttons. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset. Once the restore screen appears press Volume Up to restore the device to its factory settings or any other button to cancel. Once complete press Volume Up to reboot.
Caladose said:
I had an issue with TomTom and had to do a factory reset on the device. I just thought I'd post the instructions for those who might need to perform this actions.
With the device turned off, press and hold the TALK/SEND, END and POWER buttons until you see a message on the screen. Release the TALK/SEND, END and POWER buttons. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset. Once the restore screen appears press Volume Up to restore the device to its factory settings or any other button to cancel. Once complete press Volume Up to reboot.
Click to expand...
Click to collapse
You could also go into the memory settings and tap on the "clear storage" tab then make sure the top option says "factory default" then type 1234 on the bottom, then tap ok, and it will do the exact same thing. This obviously will work only if your tp2 is responsive and not frozen.
I had an issue where my phone WOULD NOT (attempted MANY times) hard reset. (I had installed the "Slide2ShutdownPowerKeySetup_v1.1" and I suspect this may have been the issue -- although I certainly do not have proof of that.)
Here is the HARD RESET procedure that finally worked:
"Push and hold 'send' and 'end' key. Using your teeth, push and hold the 'reset' button with the stylus. Finally, push the power button. (all three need to be pressed down when you hit the power). The tri-color screen flashes, then a white screen gives the standard warning of the hard reset."
Thanks to spunks74 for this information found in Post #6 here: http://forum.xda-developers.com/showthread.php?t=568631&highlight=hard+reset
ksawatsky said:
I had an issue where my phone WOULD NOT (attempted MANY times) hard reset. (I had installed the "Slide2ShutdownPowerKeySetup_v1.1" and I suspect this may have been the issue -- although I certainly do not have proof of that.)
Here is the HARD RESET procedure that finally worked:
"Push and hold 'send' and 'end' key. Using your teeth, push and hold the 'reset' button with the stylus. Finally, push the power button. (all three need to be pressed down when you hit the power). The tri-color screen flashes, then a white screen gives the standard warning of the hard reset."
Thanks to spunks74 for this information found in Post #6 here: http://forum.xda-developers.com/showthread.php?t=568631&highlight=hard+reset
Click to expand...
Click to collapse
Thanks, that works perfect
verizon version the end and power key are the same....
Related
I'm doing what it said in the manual:
Hold vol down and enter, press reset. release reset while still holding vol down and enter.
No dice.
Anyone done it?
I had the same issue (don't have the handset now - long story) but I ended up using the Settings, Clear Storage option.
Easier way: Settings, Clear Storage, 1234.
I had trouble doing a hard reset at first. The manual states
Hold VolDown & Enter
Press Reset
Release VolDown & Enter when a message appears
Then press VolUp
The critical omission in the manual is that they mean the round button when it says "Enter".
The button is referred to as "Enter" everywhere in the user guide but is not called that on the diagram on 25 of the user guide.
Black93300ZX said:
Easier way: Settings, Clear Storage, 1234.
Click to expand...
Click to collapse
Yep mine said that earlier today, hit a wrong button.
hit vol down and enter and reset but do not release the reset button until u see rainbow coming to your screen.
have fun...
On my Verizon Touch Pro none of the button methods worked. I used Settings>Memory>Clear Storage tab
Thank you, finisterre for your help. I just install today plugin for qvga then it hang. that make me confuse and I am happy now. Thank you again.
Can anyone tell me how to do a hard reset with the buttons on the phone Phone comes on an gets stuck tried soft reset with the button on the bottom of phone but it did nothing please help
bkcarroll1 said:
Can anyone tell me how to do a hard reset with the buttons on the phone Phone comes on an gets stuck tried soft reset with the button on the bottom of phone but it did nothing please help
Click to expand...
Click to collapse
1. With your phone on. Pull out your stylus. t>p/=GYa
2. Hold your Touch Pro upside down. !vBBf*?B0`
3. Press and Hold the VOLUME DOWN and ENTER buttons, then press the RESET button with the stylus tip till message appear. Z S1?GM<
4. To HARD RESET, Press the VOLUME UP button to perform the hard reset, or else press any other button to cancel. +Yxdl6&
5. Then just follow all the screen instruction to continue... <B`9[=FLg
}l6 zYef{
Tips: u/_L=9
- If you're forced and unavoidable to 'Hard Reset' your phone, you can prevent loosing your data by sync them all to your computer before performing this reset. '$H`Q$F
thanks it worked
Hi,
I turned off my phone yesterday and then when I tried to turn it on again it got stuck at the white screen that appears at first - it shows the HTC logo and the information about the software in red letters. I waited for a few minutes but nothing happened, then I reset it from the button under the back cover and still the same thing happened - it stuck at the same point. Any ideas how to fix it? Thanks so much in advance!
Sounds strange, i would try to do a hard reset, but you´ll lose all your data on the device if you do this!
Any other ideas?
----
To hard reset your phone which means to delete ALL personal data and settings and have the phone in factory default conditions as if you turned on the phone for the first time after purchasing, press the following buttons:
1. With the device turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then briefly press the POWER button.
2. Continue pressing the VOLUME UP and VOLUME DOWN buttons until you see this message on the screen:
"This operation will delete all your personal data, and reset all settings to the manufacturer default settings. Press VolUp to restore manufacturer defaults, or press other keys to cancel."
3. Release the VOLUME UP and VOLUME DOWN buttons.
4. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
You can also use Clear Storage to reset your device back to factory default settings.
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the System tab, tap Clear Storage.
3. Enter “1234” and then tap Yes.
If you have HSPL applied, you could be able to use MTTY method and upload new ROM.
Mtty tool recovery is nothing to mess with, it is a last resort. If you don't know what you are doing, you can easily kill your phone.
Do a hard reset, if that doesn't work, ( I anm assuming that since this is your first post, you do not have a custom rom ) find a copy of your rom and re flash it. But try severral hart resets first.
Thanks to all of you guys. The hard reset did the trick. I had my data backed up on the SD card so I will restore it from there. Thanks for the help.
I have tried hard resetting my phone, but I cant' get it to work. With the phone off, I hold the "volume down" key and press the power button. If i press the power and release quickly, nothing happens. If I hold it long enough for anything to happen, the phone just starts up normally. What am I doing wrong?
Also, If i reset the phone from the privacy menu, does it do the same thing as the above method?
no idea on the second question but try holding the volume up and down at the same time and then pressing the power button until it starts to boot. Continue holding down volume up and down and release the power button once it starts booting. Let us know if this did it for you.
I think you need to hold the volume control button (both Up & Down together) and the Power button until the Reboot screen appears.
Yea but none of the options will reset my phone...
My son was playing with the pattern lock and locked my phone, recovery using gmail username/pass don't work, so I need to hard reset it...
I've done the "delete all user data" and "delete cache data"
But it hasn't removed the lock... and I see my wallpaper is still the same...
Any other ideas... I am stuck with a $200 paper weight right now!!
Update: Fantastic!! Called Samsung, they said it's a bug and I need to send it in to be reflashed... hell no, back to the AT&T store I go... EXTREMELY dissapointed in AT&T / SAMSUNG.... It appears the standard Vibrant S can reset to factory settings!
Thanks,
Rich
Ok here is my problem. I had a waterdamage that toasted a small part of my screen and as it seems, maybe something else too.
After the waterdamage the phone made some kind of reset.
Now the display is locked and i dont know the correct pattern.
In Fastboot Flash Mode "Factory" reset doesn't reset the lockscreen.
And "Recovery" doesnt work at all it just says "Kein Befehl" witch is german for "no command"
Any suggestions/solutions on what i could try? or is my device now a few months after the end of the warranty dead?
Solved it myself
Fixed it myself. Here if someone lost soul in the future has the same problem.
1Ensure the device is powered off.
2Press and hold the Volume Down button for 3 seconds. While still holding the Volume Down button, press and release the Power button.
3From the "Boot Mode Selection Menu" screen, select Recovery. Note Utilize the Volume Down button to scroll through the menu options and the Volume Up button to select.
4From the "Android system recovery" screen, press and hold the Power button then press and release the Volume Up button to display the menu options.
5Select wipe data/factory reset.
6Note Utilize the Volume buttons to highlight and the Power button to select.
7Select Yes -- delete all user data.
8Note Allow several seconds for the factory data reset process to complete.
9Select reboot system now.