Hi all,
Forgive me if this is not the good place for my problem.
In fact I'm trying to setting up iPhone Today which work correctly, but I've got a problem with the today screen as a small part at the bottom (see screencap) is appearing.
I searched everywhere to disable this but cannot find anything about this to turn it off. Can someone help me for that ?
TIA
Jam
Related
Hi there, I have a random problem, that I have had on the 1.5 ROM, the beta ROM, and now the new ROM.
Occasionally, the screen goes completely white. It seems to be working, but the screen is not. This is not to do with an applications that are installed, as this happens even with a factory reset unit.
I can't figure out what causes it. Has anyone else seen this? Any comments?
have you find a solution
I know this post is quite old, but I can't find a clear answer about this problem...
My Atom stop with a white screen (colored,thin lines appear on the screen.Then the screen slowly turns to white)...
I must remove the battery and reset it to launch it again
I tryed everxthing... ROm update from the original firmware, PDAVIET (3 version on WM5 an WM6)
lot of resets, hard and soft...
This problem appers all the time... but randomly... 1 hours, 5 hours or 2 days after a reset....
Can you help me...
RGS
Fred
May be a hardware problem. To me it looks like a loose connection inside to the screen.
Do a search in the forum for "White Screen of Death" and you'll find lots on info regarding that problem. I don't think this was a problem with Tornados. I've read about this problem, mainly on HTC Dash. Good Luck.
i had similar problem with my E200 afer fall from 1 meter. I think its hardware problem. Dont know how to fix it
with mine tornado, it was a connector that wasn't attached anymore from the screen to the board..
you can always give it a try to look inside
hello everyone,
i've seen throughout the forum, many users having the same problem as mine, it being the screen of the VOX going black, but the phone still working on the background, receiving calls etc.
i've seen that after the first timeout, the screen when its in a less brighter screen, it shows the phone perfectly
as no solution for this problem has been found yet
i wanted to know, if it is possible to someone to figure out if you can make the VOX work only with the less brighter screen, instead of the normal one.
maybe change something on the reg. i dont know
can someone please help me? or i can lose my phone for good because of this problem
cheers, and many thanks in advance
please, can someone help?
Yep. I have figured it out, but it's really booty how I have it working. I am binding a key press to kill and restart Tornado PowerControl with a dim/toggle argument. Attached are the 2 small scripts, I am sure it can be done cleaner than this however I didn't feel like it, heh. Simply remove .txt off the attached files, place them on your device and once you have TPC installed to main memory and MortScript, it will toggle your display when you run kill.mscr.
EDIT: Attached load.exe as per request.
Hi all,
during the past week i noticed that my today screen looks strange at least once a day.
When i close an application, sometimes the today screen moves up some pixels and remains there. The lowest part of the window of the last used application can be seen then at the bottom of the today screen (in the example pic it's the phone dialpad).
The only solution is to reset the device.
This strange behavior happens regardless of the application that was opened.
Is there anybody out there having a clue ? Thank you.
Regards,
Scholler
it looks like you've installed some sort of "task bar" application. Either uninstall that app or disable that app from displaying information on the bottom of the today screen.
Scholler said:
Hi all,
during the past week i noticed that my today screen looks strange at least once a day.
When i close an application, sometimes the today screen moves up some pixels and remains there. The lowest part of the window of the last used application can be seen then at the bottom of the today screen (in the example pic it's the phone dialpad).
The only solution is to reset the device.
This strange behavior happens regardless of the application that was opened.
Is there anybody out there having a clue ? Thank you.
Regards,
Scholler
Click to expand...
Click to collapse
This is a known issue with a certain release of Raphaels.
There was a thread discussing this over in the general section.
Scholler said:
Hi all,
during the past week i noticed that my today screen looks strange at least once a day.
When i close an application, sometimes the today screen moves up some pixels and remains there. The lowest part of the window of the last used application can be seen then at the bottom of the today screen (in the example pic it's the phone dialpad).
The only solution is to reset the device.
This strange behavior happens regardless of the application that was opened.
Is there anybody out there having a clue ? Thank you.
Regards,
Scholler
Click to expand...
Click to collapse
This is a known issue with a certain release of Raphaels.
There was a thread discussing this over in the general section.
This is a known issue with a certain release of Raphaels.
There was a thread discussing this over in the general section.
Hi all,
until now i did not find a solution for this problem... and i did not find the thread you mentioned...
Is there anything that could help me solving this ?
Thank you.
hi guys im new here. i need help im having a problem with the touchscreen of my phone (ideos U8150) it has been root a year ago. everything is working fine the suddenly i got the problem. i dont have a problem on home screen but when i press clear on the drop down thing its not working, on gallery when i open the pictures and press the icon of share or delete im getting the same problem. what do i need to do? tried to search the net if screen calibration is possible but im not getting any good answer. pls help
Hi guys, I've a problem with my HTC HD2.
When I make or receive a call the screen turn off and I can't do anything, I can't use the speakerphone or keypad, nothing at all.
If I want to close the call I must unlock the phone and hang up by navbar.
I've searched on web and I found many thread in relation to my problem; I've tried many solutions to resolve it but failed.
I've also disabled the light and proximity sensor but it didn't work. The problem still remain.
I've forgot to say that I changed the main flex and the display of my HD2 because the originals was damaged. Until now I never had any problem, it all started with the new pieces.
I tought that if the sensors were damaged the screen shouldn't become black when I answer or when I start a call, am I wrong?
Another thing, I've just inserted headphones in the phone and made the call from another device: the screen remains on and I can use all the commands without any problems. What could be the problem?
I hope someone can help me to find and resolve it.
Ps: I apologize if there are mistakes in my english but it isn't my mother tongue.