Database Info

power button and return to today screen

I have the following little problem with WM6. Every time i press the "power button" on my device, WM6 returns to the today screen. What i really want is, that it stays in the last application which was open before i switched the device off.
This behavior is especially annoying when i use tools like "ScreenOff" which does nothing else but turns the screen off (the programs are running further). This is useful when it comes to mp3 listening or something like that. But when i press the power button to turn the screen on again there is no mp3 playing application but the today screen.
Can anyone tell me where to change that behavior?

whats the today timeout set to in settings->today->items ?

It is activated and set to 8hr.

You need to disable the password lock in Security settings. This will mean that a password will NOT be required to unlock the phone upon restart or after the pre-determined timeout.
With the password lock disabled, every time you power up your phone, it will be at the last application you had open.

I already have the password lock disabled. So that can not be the problem.

If you are using the today screen battery meter there is an option for it to do that. Annoyed the hell out of me till I disabled it.

Thank you, thank you!!!
You made my day

Screen lock/unlock dodgy

I am either going nuts or this is a common isue:
Normally when you tap "lock" on home screen the brightness diminishes and the phone is locked. To unlock, you have to tap "unlock" on the lower left side of the screen, hen you get a message telling you to tap again unlock in the middle of the screen and its unlocked.
Well, my Polaris only does this sequence sometimes. Especially if I let it go in standby for a couple minutes, as soon as I press any key I get another story:
In lower left corner of screen I have the word" cancel". Tapping it doesn't give me another "unlock" button on screen and the phone remains locked. I have to put it in standby from the power button and then try again to get the normal unlock behaviour.
Anyone else experiences this?

Nobody? So everybody's unlock feature works like it should?
Then I think it's reset time for my Polaris....

I personally don't use, the device lock feature... Just the standby, whith the HW buttons off... and it works just fine for me

I have noticed that when you press the central button in the TC, what you describe is what exactly happens. But this happens to me only when I do that. If a tap the screen without touching the button, I have the normal behaviour.

Yes, exactly.
@gnick: if I use the standby with HW keys lock it works ok for me also.
The issue is only with the HTC Home lock feature and the central key

dtancu said:
I am either going nuts or this is a common isue:
Normally when you tap "lock" on home screen the brightness diminishes and the phone is locked. To unlock, you have to tap "unlock" on the lower left side of the screen, hen you get a message telling you to tap again unlock in the middle of the screen and its unlocked.
Well, my Polaris only does this sequence sometimes. Especially if I let it go in standby for a couple minutes, as soon as I press any key I get another story:
In lower left corner of screen I have the word" cancel". Tapping it doesn't give me another "unlock" button on screen and the phone remains locked. I have to put it in standby from the power button and then try again to get the normal unlock behaviour.
Anyone else experiences this?
Click to expand...
Click to collapse
Yes, but very rarely and even then when I press Cancel the normal lock screen resumes and I unlock in the normal way. I have "Do not lock all buttons" selected in the Key Lock settings. Don’t know if this is significant.

2 stages for screen lock?
I use my TC while riding motorcycle, so I want several apps (TomTom, gps tracking [gps.run]), music [was WMP, but now Coreplayer] and TellmeText) running and the screen off so as to save battery power.
If you press the power button when key lock is on it will turn the display completely off, and *most* programs will keep running. TomTom is a notable exception- it stops working, presumably because it can no longer access the gps?. But better behaved/next generation GPS apps such as run.gps continue to run. WMP, bless its pathetic cotton socks, seems to work sometimes!
Are these inconsistecies uinique to my unit, or known quirks?
Anyone suggest a app that will turn the screen off and allow ALL open apps to run, including TomTom?
Thanks

I don't know how you're operating any of the buttons on the TC with riding gloves on!!

hambola said:
I don't know how you're operating any of the buttons on the TC with riding gloves on!!
Click to expand...
Click to collapse
anyone got anything more useful to add to what was a serious comment/Q

Man, the battery life sucks on this device So my quest on how to turn the screen completely off and lock the keys properly while running all software (especially GPS based such as TomTom) continues....
Anyone know of a 3rd party app that will do this?
I have not read all 200 pages, but it seems there are mixed results for running S2U2 on the Touch Cruise (http://forum.xda-developers.com/showthread.php?t=353008) ? Anyone having success?
Thanks

I know its late but I just saw this and thought I would mention that I managed to over come using TomTom without the device being on. However it doesnt save much on power as the GPS device need power to work.
But I using a simple function I wrote in my application to lock the device using the standard device lock API calls and then rather than switchingthe device into sleep mode (off) I switched it into IDLE mode, which is basically just switching the screen off, the device lock prevents any unwanted button presses.
The power button would just return this back to normal.
I have not yet worked out how to stop the device brightness changing when the screen lock is enabled on the device... :/ Which is my next task.

Ramakin...
well that would be great because even saving having the screen dimmed during lock would help battery life. And, pressing the power button to resume would be MUCH easier than stabbing around at in the sun trying to unlock the screen. It would also make TomTom behave like all other 21C GPS applications, i.e. run on idle.
So, can you send details?
During a recent motorbike trip where I just used TomTom and tracking software (even turned the phone off) I was SHOCKED at how crap the battery life was

App the turn off the screen but not lock

Hello everyone,
I have been searching for an app/widget by which I can turn off the screen but not lock it. This is because my device is under a corporate policy that requires a complex password if it is locked. (the lock is enabled after 20 mins of inactivity). The apps that I have tried have all turned off the screen and locked the phone.
Any suggestions?
Thanks,
Sayantan
PS: Needless to say that all this effort is to save the power button from wearing out!

[email protected] said:
Hello everyone,
I have been searching for an app/widget by which I can turn off the screen but not lock it. This is because my device is under a corporate policy that requires a complex password if it is locked. (the lock is enabled after 20 mins of inactivity). The apps that I have tried have all turned off the screen and locked the phone.
Any suggestions?
Thanks,
Sayantan
PS: Needless to say that all this effort is to save the power button from wearing out!
Click to expand...
Click to collapse
Sorry, but with a corporate policy, you will not be able to dis-able the lock, on screen turn off, and password on unlock. The only way is to see if your corporate admin is willing to change the policy for you, on your phone, but I would doubt that, considering this is a mobile device connected to a corporate network in some form or fashion.
It is not the apps that do this, but the underlying settings within android that the corporate policy alters.

Thanks Jim.
I actually hooked up to my corporate server only recently, but I've been searching for an app even before that. My screen off timeout is 2 mins and screen lock (pattern & now password) is 20 mins. What I was looking for was to turn off the screen. But every app I found also locked the device and I had to enter the pattern or password. This was even before the policy enforcement.
The app comes in handy when outdoors where you might need to turn screen off immediately after use before pocketing it but not turn on the password.
Thinking of writing one myself now as my power button might already be feeling its age!
Thanks,
Sayantan

Since you want to save your power button, why dont you activate ' volume button wake screen '?
If you're on JB leak the type *#*#6686#*#* in your dialer and it'll take you to a secret laboratory menu. select Volume Wake screen and then you have to press one of the volume buttons to do the same.
Not sure if this works on ICS but you can always try.
Sent from my ME865 using Tapatalk 2

Already have the volume rockr wake by editing the build.prop and key layout files. Was not aware of this menu. Thanks for sharing. But what I am really looking out for is an app/widget which just turns the screen off (similar to screen timeout) but not lock the screen (as in security timeout).
~
Sayantan

Hi @SMONDAL84,
Have you managed to find/program smth that solved your problem? I'm looking for exactly the same thing for months. I've searched the whole Internet (you'll have to trust me on this one) but all apps and widgets always lock the screen while turning the screen off. I'm no programmer, but I'm suspecting Android does not allow this.
Well, if you ever try to program smth, here's a suggestion: configure your power button to don't lock the screen and make some kind of shortcut that simulates the power button press.
I know it's been years... But please someday come back to this thread and let me know if you ever found anything

Rubbs said:
Hi @SMONDAL84,
Have you managed to find/program smth that solved your problem? I'm looking for exactly the same thing for months. I've searched the whole Internet (you'll have to trust me on this one) but all apps and widgets always lock the screen while turning the screen off. I'm no programmer, but I'm suspecting Android does not allow this.
Well, if you ever try to program smth, here's a suggestion: configure your power button to don't lock the screen and make some kind of shortcut that simulates the power button press.
I know it's been years... But please someday come back to this thread and let me know if you ever found anything
Click to expand...
Click to collapse
Here you go :thumbup:
http://forum.xda-developers.com/showthread.php?t=1934495

Swipe screen with no lock?

Hi,
My work requires me to have a password on my phone, and has set the maximum auto-lock time to 29 minutes. If I turn the screen off with the power button and then turn it back on less than 29 minutes later, the phone goes right to my home screen. If I turn it back on greater than 29 minutes later, the phone goes to the swipe/unlock screen.
I like the swipe screen - it prevents me from accidentally opening apps when I reach into my pocket to take out my phone. But obviously I don't want to have to enter a password every time I turn the screen on.
So - is there a way to tell it to activate the swipe screen every time I turn the screen on, but only require the unlock password if it has been > 29 minutes since the last time I turned it on?
Thanks

merc1286 said:
Hi,
My work requires me to have a password on my phone, and has set the maximum auto-lock time to 29 minutes. If I turn the screen off with the power button and then turn it back on less than 29 minutes later, the phone goes right to my home screen. If I turn it back on greater than 29 minutes later, the phone goes to the swipe/unlock screen.
I like the swipe screen - it prevents me from accidentally opening apps when I reach into my pocket to take out my phone. But obviously I don't want to have to enter a password every time I turn the screen on.
So - is there a way to tell it to activate the swipe screen every time I turn the screen on, but only require the unlock password if it has been > 29 minutes since the last time I turned it on?
Thanks
Click to expand...
Click to collapse
Settings>Lock screen and security>Secure Lock Settings. There you can turn off "Lock automatically with power button" and you can also change the amount of time under "Lock Automatically". That may take you directly to the home screen though...havent tried it. If you set up a finger print its super easy to unlock, though.

Anyway to make smart lock work for you?
Sent from my SM-G920V using Tapatalk

brholt6 said:
Settings>Lock screen and security>Secure Lock Settings. There you can turn off "Lock automatically with power button" and you can also change the amount of time under "Lock Automatically". That may take you directly to the home screen though...havent tried it. If you set up a finger print its super easy to unlock, though.
Click to expand...
Click to collapse
Maybe I didn't explain myself correctly. I don't want it to Lock because I don't want to have to input a password every time. I also don't want to change the amount of time because I don't want to increase the frequency of times that I need to enter the password.
All I want is for the swipe screen to appear every time I turn the screen on. I want the lock screen to appear only when the phone has been off for 29 minutes. My work does not allow us to use the fingerprint unlock.. it has to be an 8 character password.

MrWicked1 said:
Anyway to make smart lock work for you?
Sent from my SM-G920V using Tapatalk
Click to expand...
Click to collapse
Yes, smart lock is enabled and works well. But with smart lock, the swipe screen only appears after 29 minutes; I just don't need to enter the password. I want the swipe screen to appear even if the screen has only been off for 30 seconds.

Potential fingerprint scanner issue?

I have a S7 from AT&T, non-edge. I have the lock screen setup with the fingerprint reader and a pin code.
95% of the time, the fingerprint scanner works the first time.
4% of the time, it will work the second time.
1% of the time, it does something VERY strange. If it fails the first and second time, it will NOT unlock the screen using the fingerprint reader unless i enter the pin code. It will let me keep trying my fingerprint, but it will says its not valid. I can enter the pin code, unlock the phone, relock, then boom, the fingerprint reader works again. Its like once it fails twice, even though the phone lets you keep trying, it doesn't really read it.
Has anyone else experienced this? It's very annoying and I am wondering if I should RMA, or if this is a software issue.

Finger print scanner indeed suck.. Just make multiple imprints of same finger.. Get every angle possible.

Only time I have to enter my pin is when I reboot the phone. It wants my pin instead of my fingerprint. After that first time though the fingerprint is all I have to do.

when entering a fingerprint each time change the angle of the chosen finger slightly as you press the home key having multiple images at diff angles lessens the chance of not getting a match.
Sent from my SM-G930F using Tapatalk

This has taken some getting used to, coming from the Nexus 5x... its fingerprint scanner is so much better.
On the nexus, you go from a black locked screen straight to the home screen in a split sec with a touch of the scanner that's way more accurate and gets it 99% of the time .
With the S7, I'm having to press the power/home button, then scan, which gets it right more like 65% of the time. And is a 2 step process. Or hold the home button down and try to time it just right- too soon and it doesn't read.. too long and i open google now... haha too complicated. I'm almost thinking there's an issue with mine it's so inaccurate. Or maybe i'm just spoiled to the nexus...
Bottom line= LG & Google implementation= much much better.

Chronzy said:
This has taken some getting used to, coming from the Nexus 5x... its fingerprint scanner is so much better.
On the nexus, you go from a black locked screen straight to the home screen in a split sec with a touch of the scanner that's way more accurate and gets it 99% of the time .
With the S7, I'm having to press the power/home button, then scan, which gets it right more like 65% of the time. And is a 2 step process. Or hold the home button down and try to time it just right- too soon and it doesn't read.. too long and i open google now... haha too complicated. I'm almost thinking there's an issue with mine it's so inaccurate. Or maybe i'm just spoiled to the nexus...
Bottom line= LG & Google implementation= much much better.
Click to expand...
Click to collapse
Press and depress the home button quickly, but instead of taking your finger off the button immediately, keep it on there lightly touching for a split second. It's not that difficult.
It works for me on the first try 95% of the time. The other times it's my fault for not covering the button but instead getting just a corner of it.
I also set it up with both thumbs and both index fingers and it works with all. I'm quite pleased

I've been having aroung 50% success rate on the first time with the fingerprint scanner and about 95% on the second attempt. I don't know if I'm doing anything wrong. I've made the fingerprint profile many times, change position and angles but I still can't get it to work reliably. I wish i could see if theres any gaps, or maybe tone down how "strict" the scanner is.

I've found another flaw in the finger print reader... I'll describe the issue, then upload a vid to show it.
My screen is set to lock/dim/shut off after 30 seconds. At which time you'll have to press the home button OR power button to wake the phone, followed by using your finger print to open the phone.
However, within a few seconds of the screen shutting off you can just press the home button with any finger even ones you've never registered a print for and it will unlock the phone.
https://www.youtube.com/watch?v=Xhb0e01aLuQ

HTCMDA said:
I've found another flaw in the finger print reader... I'll describe the issue, then upload a vid to show it.
My screen is set to lock/dim/shut off after 30 seconds. At which time you'll have to press the home button OR power button to wake the phone, followed by using your finger print to open the phone.
However, within a few seconds of the screen shutting off you can just press the home button with any finger even ones you've never registered a print for and it will unlock the phone.
https://www.youtube.com/watch?v=Xhb0e01aLuQ
Click to expand...
Click to collapse
There is a setting, which by default locks the phone 5 seconds after the screen turns off. During that time you can just push the button and no need to unlock.
But if you push the power button to turn the screen off, if locks immediately. There is a setting for that as well.

Yea...that's not a good thing. Should not be on by default.

Chronzy said:
This has taken some getting used to, coming from the Nexus 5x... its fingerprint scanner is so much better.
On the nexus, you go from a black locked screen straight to the home screen in a split sec with a touch of the scanner that's way more accurate and gets it 99% of the time .
With the S7, I'm having to press the power/home button, then scan, which gets it right more like 65% of the time. And is a 2 step process. Or hold the home button down and try to time it just right- too soon and it doesn't read.. too long and i open google now... haha too complicated. I'm almost thinking there's an issue with mine it's so inaccurate. Or maybe i'm just spoiled to the nexus...
Bottom line= LG & Google implementation= much much better.
Click to expand...
Click to collapse
It works 100% of the time for me if i press the home button and leave my finger on it. Its not even a tiny bit innacurate. Maybe your fingers are greasy.
The reading from screen off sounds a bit better but is essentially the same thing. Just on S7 you have to actually press the button down rather than just press the finger on the sensor. Im not sure why the added pressure makes it that much worse.
HTCMDA said:
Yea...that's not a good thing. Should not be on by default.
Click to expand...
Click to collapse
Forgot to reply to this part.
No it shouldnt be on by default. Its a great feature, if you dont like it you turn it off.

HTCMDA said:
Yea...that's not a good thing. Should not be on by default.
Click to expand...
Click to collapse
That's an android thing. My previous LG and Motorola phones had the same settings by default.
It is convenient because if the screen turns off due to timeout while you are reading something you can quickly turn the screen back on without having to unlock it (password unlock can be very annoying). I gotta tell you if that feature didn't exist, I would have to set a really long screen timeout because I do quite a bit of reading where I don't touch the screen for a while and the constant need to unlock would drive me crazy.
Plus, an extra 5 seconds (added to the screen timeout) is unlikely to make it insecure. If you hit the power button to turn the screen off, it locks immediately. I think it's the best combo of convenience and security.

i'm just saying i feel like that goes against the "security" of having your phone.... your phone could get stolen while unlocked, and all they have to do is set your screen to never time out and now they have access to all your info...

HTCMDA said:
i'm just saying i feel like that goes against the "security" of having your phone.... your phone could get stolen while unlocked, and all they have to do is set your screen to never time out and now they have access to all your info...
Click to expand...
Click to collapse
I someone steals your phone, while it's unlocked, they already have access to all of your data. The 5 second delay isn't going to make a difference.