I am either going nuts or this is a common isue:
Normally when you tap "lock" on home screen the brightness diminishes and the phone is locked. To unlock, you have to tap "unlock" on the lower left side of the screen, hen you get a message telling you to tap again unlock in the middle of the screen and its unlocked.
Well, my Polaris only does this sequence sometimes. Especially if I let it go in standby for a couple minutes, as soon as I press any key I get another story:
In lower left corner of screen I have the word" cancel". Tapping it doesn't give me another "unlock" button on screen and the phone remains locked. I have to put it in standby from the power button and then try again to get the normal unlock behaviour.
Anyone else experiences this?
Nobody? So everybody's unlock feature works like it should?
Then I think it's reset time for my Polaris....
I personally don't use, the device lock feature... Just the standby, whith the HW buttons off... and it works just fine for me
I have noticed that when you press the central button in the TC, what you describe is what exactly happens. But this happens to me only when I do that. If a tap the screen without touching the button, I have the normal behaviour.
Yes, exactly.
@gnick: if I use the standby with HW keys lock it works ok for me also.
The issue is only with the HTC Home lock feature and the central key
dtancu said:
I am either going nuts or this is a common isue:
Normally when you tap "lock" on home screen the brightness diminishes and the phone is locked. To unlock, you have to tap "unlock" on the lower left side of the screen, hen you get a message telling you to tap again unlock in the middle of the screen and its unlocked.
Well, my Polaris only does this sequence sometimes. Especially if I let it go in standby for a couple minutes, as soon as I press any key I get another story:
In lower left corner of screen I have the word" cancel". Tapping it doesn't give me another "unlock" button on screen and the phone remains locked. I have to put it in standby from the power button and then try again to get the normal unlock behaviour.
Anyone else experiences this?
Click to expand...
Click to collapse
Yes, but very rarely and even then when I press Cancel the normal lock screen resumes and I unlock in the normal way. I have "Do not lock all buttons" selected in the Key Lock settings. Don’t know if this is significant.
2 stages for screen lock?
I use my TC while riding motorcycle, so I want several apps (TomTom, gps tracking [gps.run]), music [was WMP, but now Coreplayer] and TellmeText) running and the screen off so as to save battery power.
If you press the power button when key lock is on it will turn the display completely off, and *most* programs will keep running. TomTom is a notable exception- it stops working, presumably because it can no longer access the gps?. But better behaved/next generation GPS apps such as run.gps continue to run. WMP, bless its pathetic cotton socks, seems to work sometimes!
Are these inconsistecies uinique to my unit, or known quirks?
Anyone suggest a app that will turn the screen off and allow ALL open apps to run, including TomTom?
Thanks
I don't know how you're operating any of the buttons on the TC with riding gloves on!!
hambola said:
I don't know how you're operating any of the buttons on the TC with riding gloves on!!
Click to expand...
Click to collapse
anyone got anything more useful to add to what was a serious comment/Q
Man, the battery life sucks on this device So my quest on how to turn the screen completely off and lock the keys properly while running all software (especially GPS based such as TomTom) continues....
Anyone know of a 3rd party app that will do this?
I have not read all 200 pages, but it seems there are mixed results for running S2U2 on the Touch Cruise (http://forum.xda-developers.com/showthread.php?t=353008) ? Anyone having success?
Thanks
I know its late but I just saw this and thought I would mention that I managed to over come using TomTom without the device being on. However it doesnt save much on power as the GPS device need power to work.
But I using a simple function I wrote in my application to lock the device using the standard device lock API calls and then rather than switchingthe device into sleep mode (off) I switched it into IDLE mode, which is basically just switching the screen off, the device lock prevents any unwanted button presses.
The power button would just return this back to normal.
I have not yet worked out how to stop the device brightness changing when the screen lock is enabled on the device... :/ Which is my next task.
Ramakin...
well that would be great because even saving having the screen dimmed during lock would help battery life. And, pressing the power button to resume would be MUCH easier than stabbing around at in the sun trying to unlock the screen. It would also make TomTom behave like all other 21C GPS applications, i.e. run on idle.
So, can you send details?
During a recent motorbike trip where I just used TomTom and tracking software (even turned the phone off) I was SHOCKED at how crap the battery life was
Related
Hello all, I'm new here and I'm also new to the xda world. I just had my Atom few days ago.
I used to use Symbian where I would only need to tap the screen to wake the device so, is it possible to make Xda Atom to wake from standby mode by tapping the screen, instead pressing the "power button"?
Pressing the "power button" few times a day to wake the device could and might wear the button and it won't take long to make it unusable.
I have done my home work as a noob by searching the forum. Here: http://forum.xda-developers.com/showthread.php?t=307481
I do not really mind with the power drop. So, is there any solution to make this possible?
Thank you in advance and any help would be appreciated.
Go to Start>Settings>System>Power >Advanced and untick Turn of device if not used for X minutes.
Now your device will be always on, unless you use the power button, and the screen should just dim when you dont use it after a minute or 2, and come back on when you touch it.
Let us know how it works out.
Surur
Thank you for the hint, Surur. It works, however it's not exactly what I had in mind. By letting it to show the today view all the time, it would take too much.
I was thinking to let the screen to go completely off, but the screen is still active (touch only), or only part of the screen. So, when the device goes to blank or standby, it would wake when I tap on the screen... or some part of the screen if it could help to preserve some power.
In Symbian, I could set the time for the screen to go completely off. And when the screen is completely off, each time I tap on the screen, the screen would go on. And if no input from user, it would go off again, according to the time I set before.
Note: the device does automatic lock, so even if it gets tap by something, the display would show or awake but would not open an app or do something unwanted, until user unlocked it using combination. So, I never need to touch any button with Symbian, completely using screen only.
Is there an application that able to do something similar or better than what Symbian does? I'm even willing to pay for someone to make this kind of program.
I don't know if it's allowed to double posts or not, if not please let me know.
Here is a testimony to back up my point of view regarding the power button:
"Naturally I set it to the power button, but after a while, that button got worn down and stopped "working" so I naturally set it to recognize any other button.
This experience has taught me the hard way, that its a good choice to have (or maybe even a necessity in some cases) that other buttons to wake the unit up in case of situations like this."
Taken from http://forum.xda-developers.com/showthread.php?t=315329
So, please someone create an application to allow user to use screen to wake from standby.
Here is what I had in mind:
1. Lock the screen if standby
2. On standby mode. If I tap some part of the screen (some part of screen only to save some batt power), then it would show option to unlock.
3. If I tap but do nothing or do not unlock, it would goes to standby again.
Again, I would pay the good person who's willing to make this kind of application. Or maybe it's already available?
MDCT said:
Hello all, I'm new here and I'm also new to the xda world. I just had my Atom few days ago.
I used to use Symbian where I would only need to tap the screen to wake the device so, is it possible to make Xda Atom to wake from standby mode by tapping the screen, instead pressing the "power button"?
Pressing the "power button" few times a day to wake the device could and might wear the button and it won't take long to make it unusable.
I have done my home work as a noob by searching the forum. Here: http://forum.xda-developers.com/showthread.php?t=307481
I do not really mind with the power drop. So, is there any solution to make this possible?
Thank you in advance and any help would be appreciated.
Click to expand...
Click to collapse
You can try the keylock in the settings, that will not wake your device by tapping the screen, but it will wake up by pressing any key...
Thanks for trying to help, ai6908. Unfortunately, I couldn't find the keylock in the settings, and it still needs button to be pressed.
I do not feel comfortable pressing button. I used p800, using it, Symbian was able to be operated without the need of any button.
Depending on button, it could decrease the value of the mobile, I mean pressing button(s) few times a day would surely wear the button(s) over time. Movable parts are more easily to get broken or wear. And It would decrease the value if the mobile is going to be sold later on. With p800, I could keep the state like new for many years, thanks to the UI that allows us to fully control from the touchscreen alone.
It seems like a Microsoft and mobile manufactures scheme to make user to buy another device when the button goes wear from waking up from standby. I can't believe Windows Mobile depends on the need of button to be operated. I even have to use button to take picture with Atom.
I know many also like to use button, but I believe there are other who do not like or like me. I hope MS is flexible about this like Symbian. Someone could help me on this issue?
Keylock is under settings/system...you can try it, but it is not like the symbian one that you mentioned...
I couldn't find Keylock in the settings/system, maybe it's a separate application. Thanks ai6908 for trying to help me, unfortunately it's not like what I had in mind. If I couldn't find the solution that I want, I would surely use your advice.
Someone told me that the display panel is "connected" with the touch. So when the display is off, the touch capability will be off too.
Because of that, I was thinking maybe an application that would set the backlight to very minimal (so it would make the screen to go blank) after a defined period of time could do the job.
Has someone tried this before? Or is it also not possible?
I have the following little problem with WM6. Every time i press the "power button" on my device, WM6 returns to the today screen. What i really want is, that it stays in the last application which was open before i switched the device off.
This behavior is especially annoying when i use tools like "ScreenOff" which does nothing else but turns the screen off (the programs are running further). This is useful when it comes to mp3 listening or something like that. But when i press the power button to turn the screen on again there is no mp3 playing application but the today screen.
Can anyone tell me where to change that behavior?
whats the today timeout set to in settings->today->items ?
It is activated and set to 8hr.
You need to disable the password lock in Security settings. This will mean that a password will NOT be required to unlock the phone upon restart or after the pre-determined timeout.
With the password lock disabled, every time you power up your phone, it will be at the last application you had open.
I already have the password lock disabled. So that can not be the problem.
If you are using the today screen battery meter there is an option for it to do that. Annoyed the hell out of me till I disabled it.
Thank you, thank you!!!
You made my day
When my phone rings, the screen turns on. It doesn't matter if I lock ir or not. The Answer and Ignore buttons are still pressable on the screen. Is there any registry setting I can change to make it so the screen stays locked when the phone rings?
I still want to have the option of pressing the Answer and Ignore physical buttons on my phone, but I keep accidently hitting answer or ignore on my screen when pulling the phone out of my pocket.
Thanks
If you install ACs Slide 2 Unlock then you will need to slide to answer or ignore a call. Should stoip the accidental pressing of on screen buttons.
That is not an option. It cuts my standby battery life down to half a day. w/o it I can standby w/o recharging for about a week including phone calls. I probably only talk on the phone a few hours a week though.
BTW I failed to mention that I am on WM6.1
What exactly what you like to do?
If you use a regular dialer the phone will turn on anyways.
If you want something else, like S2U2.. you'll have to accept it's requirements.
Tho, I'm not aware of the battery drain issue. my phone's running S2U2 and it's fine.
try playing with the preferences.
Had to use Google Nav to get across town tonight, after sunset. I usually drop the phone in my center console after it locks location and begins giving directions. On my old Moto Droid, I could turn the screen off and just listen to the voice directions.
On the Thunderbolt, it seems to keep the screen on, regardless of what the time out is set for. If I hit the power button, the screen turns off, then powers back on in a second.
This is just a complete waste of battery. If I was sitting the phone in a car dock, it'd be different, but this is a waste. Anyone experiencing this, or know how to get the screen to turn off when Navigation is active?
idk if this works but have you tried hitting the home button to get out of google nav (while it's still running) then hit the power button?
I have experienced the same feature. It doesn't bother me too much though cuz I have my phone plugged in.
I bet the above idea works.
this is not a signature I type it in every time maybe sent from my phone or my computer
Bateluer said:
Had to use Google Nav to get across town tonight, after sunset. I usually drop the phone in my center console after it locks location and begins giving directions. On my old Moto Droid, I could turn the screen off and just listen to the voice directions.
On the Thunderbolt, it seems to keep the screen on, regardless of what the time out is set for. If I hit the power button, the screen turns off, then powers back on in a second.
This is just a complete waste of battery. If I was sitting the phone in a car dock, it'd be different, but this is a waste. Anyone experiencing this, or know how to get the screen to turn off when Navigation is active?
Click to expand...
Click to collapse
It only keeps the screen active if you are in the navigation program. Just back out, or go to any other screen and it will turn the screen off normally. Working as intended.
akanatrix said:
It only keeps the screen active if you are in the navigation program. Just back out, or go to any other screen and it will turn the screen off normally. Working as intended.
Click to expand...
Click to collapse
Have to test this. Thanks.
I have experienced the same issue with the thunderbolt. The screen stays on weather I have the phone plugged in or not.
I see hitting the home button as more of a workaround than a solution here. It's easier for me while driving to turn the display on and off with one physical button.
I'm hoping that cyanogenmod will fix the issue when it's released but I feel like there should still be a way to set the screen to stay off when the power button is pressed in navigation.
I think its a feature, keep screen alive. As mentioned, going to home screen allows you to put it to sleep, but you cannot while navigation is active.
I can see your point though, keep it off, then a quick on shows you where you are without the need to open the app from the tray.
In order to reduce battery drain while navigating and streaming audio, I used to turn the screen off on my Nexus One whenever I had a long uninterrupted stretch ahead with no turns; the audio prompt gave me plenty of time to turn the screen back on before I needed to see the road configuration. That doesn't work on the G2x; the screen only stays off for a second or two before coming back on, like one of those trick birthday candles that keeps relighting itself. I can turn the screen off if I change to another application before hitting the power switch, but that means more fiddling in traffic to get the navigation display back.
Is there a setting I'm overlooking, or is it just a peculiarity of this version that I will have to live with?
This was bothering me also,
With the navigation still running, press the home button to back out to the homescreen and keep the navigation still running in the background. This allows you to turn the screen off
omarsalmin said:
With the navigation still running, press the home button to back out to the homescreen and keep the navigation still running in the background. This allows you to turn the screen off
Click to expand...
Click to collapse
Yeah, that's a variant of the "switch to another application" technique I mentioned. Unfortunately, that still leaves a good deal of fiddling with the phone while driving to get back to the navigation screen.
Thanks for the reply, though; I'm glad to hear I'm not alone in this concern.