Arcsoft MMS 5 - General Topics

Hi All,
Does anybody know how to make Arcsoft MMS automatically disconnect my internet connection and connect the mms connection when it needs to send/receive MMS.
Currently I have to:
1. Go to Connection Settings
2. Switch to Optus MMS Settings
3. Switch out and wait for Arcsoft to send/ receive
4. Switch back to Optus Internet Settings
In v4 I know that it would automatically do all this for you (as it should!). I am using version 5.0.43.116.

Sorry to do this but.. bump
(I can't be the only one annoyed with this problem)

Related

Newby question - MMS and GPRS

Hello all,
I was wondering, in order to receive an MMS message, do I have to turn on GPRS communication, or is it automatically switched on upon receiving an MMS message?
It has to be configured on your device, GPRS and MMS that is, and it also has to be acivated by your network. I was trying to get my GPRS working and couldn't work out why it wasn't until I finally spoke to someone at O2 who had a vague idea of what they were doing and said new customers had to request activation of GPRS!
i get mms wihtout having turned grps on at the time
but when i open the msg then it connect to the network using grps
and get the mms pic, movie, sound or what ever
Ah, that clarifies!
Thanks for your replies!
With regards,
Thumper
a bit more clarification ... the MMS platform sends a special SMS to the phone (xda or other) ... if the phone is equiped for MMS the proper application (ex: MMS Composer or EZWAP 2.5) will start and it will connect through GPRS ... this requires also to have the device and the dial registered on the MMS platform .... otherwise a normal SMS will be displayed containing a URL to download the MMS from any web browser.
My GPRS connection works fine, I can browse the Internet with IE. But when I try to send a photo message (MMS), I get "Cannot connet". Does anyone know why?
if you put in the right
Server name
Gateway
and
server address
in mms composer
and you have made them turn on mms in their end (the cellphone company)
and some people need to make a new grps connections with another access point (often mms)
then i dont know
They sent me a text message that automatically entered the details in MMS composer for me (server name, server address and gateway). I found the new details there when I checked. Because I called them to activate the service (and so they sent me the text message), I'm assuming it's active from their end. I'm not aware of a different GPRS connection I should be using. There are already three connections set up: WAP CSD, WAP GPRS and Internet GPRS. Takker ellers for tilbagemelding.

altering the SMS gateway on a T-D1 brand...

hi folx,
i have a T-D1 brand software on my mda and have a e-plus card inside, so i canĀ“t send SMS nor MMS. any idea how to change this?
I get a Fawlty Towers feeling here, so go to the phone settings -> services tab & get the settings for 'voice mail and sms' from the network. Compare these with the one's you got from e-plus. For MMS go to the connection settings & create a new gprs connection for MMS according to the e-plus values & use that one in your MMS app.
Cheers, M

Auto change apn from MMS to Data

Does any one know how go from data connection to mms and back automatically or simultaneously? On my Blackberry, it works flawlessly but on my 750, I have to disconnect my data apn, connect my MMS apn send/receive my MMS messages, disconnect the MMS apn, connect my data APN so I can get my push mail working again. Its really annoying. Help really appreciated.

O2 MMS settings

Just started getting a problem with the MMS on my Serra and not sure if anyone can let me know theirs please.
Under connections/My ISP I have
Mobile Web - Cellular Line (GPRS,3G), mobile.o2.co.uk, o2web/password, DNS 193.113.200.200, Alt DNS 193.113.200.201
Mobile Web 2 - Cellular Line, mobile.o2.co.uk, o2web/password, DNS 193.113.200.200, Alt DNS 193.113.200.201
My Work Network
02 Active - Cellular Line (GPRS, 3G), wap.o2.co.uk, o2wap/password, user server specific
MMS Settings
o2uk - Gateway 193.113.200.195 port 8080, server address http://mmsc.mms.o2.co.uk:8002. Connect via My ISP
Thanks
Sorry all fixed myself, my proxy settings were incorrect
What exactly was the error - I still cannot get MMS to work even with your seetings from your post?
I found out that mine was that a proxy server was enabled. I hook mine up to my laptop while in the office to charge and activesync with my Exchange server. Hadn't realised that it also enables my office proxy server.
crazyC, is the SIM in your Serra on O2 contract or Pay and Go? I'm guessing it's the former, but if it's the latter I know the settings...
Is it just MMS that's not working, or is your data connection (via telephone I mean) not working either?
It was just MMS that did not work.
I am on contract, and after a lot of digging and trialling of cabs that should have fixed it, but didn't, I have sussed it out and tested it.
I will roll the settings into my O2 setup cab, test it, and then post it if anyone wants it.
YES! Please post it.
I am using these settings on my contract o2, htc touch pro. all my 3g and internet works... just no mms.
I have sat here for four hours now messing around with it...
any chance of posting the settings that worked for you?
Try this
MMS Settings
o2uk - Gateway 193.113.200.195 port 9201, server address http://mmsc.mms.o2.co.uk:8002. Connect via My Work Network
Other connections as per the normal O2 set up.
'My Work Network' shows up as O2 Active
Dont forget to set the O2MMS server as the default under MMS options
I havent tested this yet, but this cab SHOULD insert the O2 MMS settings - note you must already have the correct O2 network setup for calls and data, this is just the MMS bit.
im also having prblems with this, using the new Elite RC4. Im gunna reflash it and try again cuz i have fiddled with the settings too much
Edit - i tried the cab and the setting listed above it and neither worked for me
I have called O2 to see if they can help me and they sent me the some lame ass intruction which are exactly the same as on here... except afte you set up the o2web settings it says to use auto download for the rest :/
Whats the deal witht he proxy for the o2 active settings are they supposed to be on or off and if on, what do i set them as?
Installed the original O2 ROM to get all the settings working properly. It seems the missing details are in the WAP Proxy ones.
start - settings - connections - connection settings - manage existing under the 'my work network' (or whatever you renamed it too) - proxy (ensure use proxy is ticked) - advanced
WAP - 193.113.200.195:9201
SECURE WAP - 193.113.200.195:9203
Other than that settings are as they have been mentioned previously
MMS issues
I have extensively searched forum after forum and this seems to be the only thread with the sort of info i am searching for. I have installed TPC V3.1 Rom With required radio, everything works including MMS, however, no matter what settings i try i cannot receive normal sized pictures and any MMS videos go straight to the O2 website and all i get is a message your phone is not compatible with this type of message. Can anyone help, its really annoying............
I have tried the above .cab file and it doesn't work for me either.
Thanks in advance for any help.
O2 serra (raphael) win6.5, TPC v3.1 radio 1.14.25.05
Kevfm said:
I have extensively searched forum after forum and this seems to be the only thread with the sort of info i am searching for. I have installed TPC V3.1 Rom With required radio, everything works including MMS, however, no matter what settings i try i cannot receive normal sized pictures and any MMS videos go straight to the O2 website and all i get is a message your phone is not compatible with this type of message. Can anyone help, its really annoying............
I have tried the above .cab file and it doesn't work for me either.
Thanks in advance for any help.
O2 serra (raphael) win6.5, TPC v3.1 radio 1.14.25.05
Click to expand...
Click to collapse
Try some of these reg edits.
Thanks, but that is more for increasing the send size limit of mms, I can send them fine, but my network O2 cannot determine what phone I have and therefore only allows me to receive the smallest possible sized attachement.
I have tried numerous settings and radios to adjust this I've even tried the get settings feature and I get a txt back sorry we are unable to blah blah blah. with out going back to O2 stock rom i'm running out of options.......
Also I have never attemped to edit the registry
Again thank u for your reply......
EDIT......
Attempted reg edit, has had no affect, am I doing something Wrong.......?
o2 mms size problems
crazyC said:
I havent tested this yet, but this cab SHOULD insert the O2 MMS settings - note you must already have the correct O2 network setup for calls and data, this is just the MMS bit.
Click to expand...
Click to collapse
Hi guys, I have entered all the settings found on here and my mobile web and mms work but the mms messages received are resized to a tiny default size as mentioned on here.
Any chanch of an idiots guide to edit the registry so that o2 think it's another phone allowing me to received full size pics.
My phone is a Vodaphone UK HTC Touch Pro2 with O2 Pay Monthly Sim.
Any help is appreciated

[Q] MMS only via mobile network connection??

Hy...
Changed from sense to cm7 (hyper sensation)
i always disable mobile internet network, gprs, bluetooth etc. only connection for phonecalls and sms/mms was enabled.
if i need mobile internet, i enable manual.
the problem is since i changed to cm7 i need to enable mobile internet connection to send mms and becoming new ones.
is there a trick to say the sms/mms apk (now i try handcent sms) use temporary internet connection to send or download a mms???
"htc sence 3.5" does it before. i never had to enable the internet connection...thanx...
never mind... the set up is up to date. the swisscom mms APN set up is exactly how it should be. there is just no blue point like for the other gprs APN.
???

Categories

Resources