Just started getting a problem with the MMS on my Serra and not sure if anyone can let me know theirs please.
Under connections/My ISP I have
Mobile Web - Cellular Line (GPRS,3G), mobile.o2.co.uk, o2web/password, DNS 193.113.200.200, Alt DNS 193.113.200.201
Mobile Web 2 - Cellular Line, mobile.o2.co.uk, o2web/password, DNS 193.113.200.200, Alt DNS 193.113.200.201
My Work Network
02 Active - Cellular Line (GPRS, 3G), wap.o2.co.uk, o2wap/password, user server specific
MMS Settings
o2uk - Gateway 193.113.200.195 port 8080, server address http://mmsc.mms.o2.co.uk:8002. Connect via My ISP
Thanks
Sorry all fixed myself, my proxy settings were incorrect
What exactly was the error - I still cannot get MMS to work even with your seetings from your post?
I found out that mine was that a proxy server was enabled. I hook mine up to my laptop while in the office to charge and activesync with my Exchange server. Hadn't realised that it also enables my office proxy server.
crazyC, is the SIM in your Serra on O2 contract or Pay and Go? I'm guessing it's the former, but if it's the latter I know the settings...
Is it just MMS that's not working, or is your data connection (via telephone I mean) not working either?
It was just MMS that did not work.
I am on contract, and after a lot of digging and trialling of cabs that should have fixed it, but didn't, I have sussed it out and tested it.
I will roll the settings into my O2 setup cab, test it, and then post it if anyone wants it.
YES! Please post it.
I am using these settings on my contract o2, htc touch pro. all my 3g and internet works... just no mms.
I have sat here for four hours now messing around with it...
any chance of posting the settings that worked for you?
Try this
MMS Settings
o2uk - Gateway 193.113.200.195 port 9201, server address http://mmsc.mms.o2.co.uk:8002. Connect via My Work Network
Other connections as per the normal O2 set up.
'My Work Network' shows up as O2 Active
Dont forget to set the O2MMS server as the default under MMS options
I havent tested this yet, but this cab SHOULD insert the O2 MMS settings - note you must already have the correct O2 network setup for calls and data, this is just the MMS bit.
im also having prblems with this, using the new Elite RC4. Im gunna reflash it and try again cuz i have fiddled with the settings too much
Edit - i tried the cab and the setting listed above it and neither worked for me
I have called O2 to see if they can help me and they sent me the some lame ass intruction which are exactly the same as on here... except afte you set up the o2web settings it says to use auto download for the rest :/
Whats the deal witht he proxy for the o2 active settings are they supposed to be on or off and if on, what do i set them as?
Installed the original O2 ROM to get all the settings working properly. It seems the missing details are in the WAP Proxy ones.
start - settings - connections - connection settings - manage existing under the 'my work network' (or whatever you renamed it too) - proxy (ensure use proxy is ticked) - advanced
WAP - 193.113.200.195:9201
SECURE WAP - 193.113.200.195:9203
Other than that settings are as they have been mentioned previously
MMS issues
I have extensively searched forum after forum and this seems to be the only thread with the sort of info i am searching for. I have installed TPC V3.1 Rom With required radio, everything works including MMS, however, no matter what settings i try i cannot receive normal sized pictures and any MMS videos go straight to the O2 website and all i get is a message your phone is not compatible with this type of message. Can anyone help, its really annoying............
I have tried the above .cab file and it doesn't work for me either.
Thanks in advance for any help.
O2 serra (raphael) win6.5, TPC v3.1 radio 1.14.25.05
Kevfm said:
I have extensively searched forum after forum and this seems to be the only thread with the sort of info i am searching for. I have installed TPC V3.1 Rom With required radio, everything works including MMS, however, no matter what settings i try i cannot receive normal sized pictures and any MMS videos go straight to the O2 website and all i get is a message your phone is not compatible with this type of message. Can anyone help, its really annoying............
I have tried the above .cab file and it doesn't work for me either.
Thanks in advance for any help.
O2 serra (raphael) win6.5, TPC v3.1 radio 1.14.25.05
Click to expand...
Click to collapse
Try some of these reg edits.
Thanks, but that is more for increasing the send size limit of mms, I can send them fine, but my network O2 cannot determine what phone I have and therefore only allows me to receive the smallest possible sized attachement.
I have tried numerous settings and radios to adjust this I've even tried the get settings feature and I get a txt back sorry we are unable to blah blah blah. with out going back to O2 stock rom i'm running out of options.......
Also I have never attemped to edit the registry
Again thank u for your reply......
EDIT......
Attempted reg edit, has had no affect, am I doing something Wrong.......?
o2 mms size problems
crazyC said:
I havent tested this yet, but this cab SHOULD insert the O2 MMS settings - note you must already have the correct O2 network setup for calls and data, this is just the MMS bit.
Click to expand...
Click to collapse
Hi guys, I have entered all the settings found on here and my mobile web and mms work but the mms messages received are resized to a tiny default size as mentioned on here.
Any chanch of an idiots guide to edit the registry so that o2 think it's another phone allowing me to received full size pics.
My phone is a Vodaphone UK HTC Touch Pro2 with O2 Pay Monthly Sim.
Any help is appreciated
Related
Hi guys,
I have the Palm 750v unlocked with my T-mobile sim in. I have setup the Internet connection etc but the new MMS/SMS package sets up different and I cannot set up MMS .
Need someone who knows the password for T-mobile UK MMS
Anyone with any idea , even if you copy down the vodafone settings that would give me a guide of what is different.
Cheers
moved to treo section
Try this works for me
Thanks Chrisboy
Have you managed to get the device to send an MMS?
I havent tried to be honest but i did with my Tytn and it didnt work, i assumed it had to be switched on by Tmobile
Chris
mms I can't get working currently.
A network error (0x150) has occurred.
First things does anyone know where the automatic settings are linked too?
They must link back to a file in the registry or maybe in the windows file.
manual settings I have tried (same settings that work on my tytn still no luck)
The menu settings are different to the ones on my TyTN.
Menu,Options,Advanced
auto / manual
select manual then edit
If anyone gets it working on tmobile please post.
Thanks
speed tests are fantastic currently getting 1.1 megabits per second.
[QUOTE
speed tests are fantastic currently getting 1.1 megabits per second.[/QUOTE]
Is that on your Tytn or the 750V ???
Treo 750v chrissyboy6969. I love the device.
Dude how do you get 1.1mb/s on the device, HSDPA is not enabled the most i can get is 300kb/s
Not enabled a thing just did a speed test on the device and I am getting over 1mb always best so far is 1.1mb tmobile uk sim card. I know the phone doesn'y have wifi but I can live with these speeds over GPRS.
Very strange, i am on tmobile and i had the tytn before this and my speeds were around the same with the tytn but with this i can only get 300kb/s do you have the vodafone standard rom as well and what do you use to test the speed
Thanks
Chris
Guys Paul at Modaco sent me this . Its from the registery I guess the Vodafone part is hard set into the registry.
I have tried this and it doesn't work . If I open it with Notepad the Tmobile settings seem wrong . Is it simply just entering the correct values and you are done?
Treo 750 Clear MMS Settings
Today just got an "unlocked" Treo 750v (Vodafone Version).
The MMS settings are buried in the registry. Cannot get to them via typical set up options.
There is no way I can replace Cingular MMS settings with Tmobile (My carrier).
If I go and make change manually, the changes do not take effect. The next time I reboot/restart phone these settings disappear.
I have found registry import files in different forums, but none seem to make change properly.
Any ideas?
Yea , it seems an issue and it does come from within the reg. I have to date no none fix . Maybe some of the other more techy guys could help on the other forums.
I received my unlocked Treo750v yesterday.
So far I have been successfull in getting everything working except MMS messages.
Currently, I have aquired what I believe to be all the necessary information in order to send T-Mobile USA MMSs:
Message Center Number: +12063130004
Email Center Number: 500
MMS Gateway address: 216.155.165.050
MMS URL: http://216.155.165.050/servlets/mms
Network Profile: Default
Some people have stated they were unable to get these settings to stay after restarting their phone. I am not experiencing that problem. The closest I can get to reproducing that error is that when i turn off the cell capabilities, the Message Center Number disappears. However the correct number reappears when I turn the cell functions back on.
I've taken a brief look at the reg file in T_Mobile_750v.zip
Code:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Palm]
[HKEY_LOCAL_MACHINE\SOFTWARE\Palm\Messaging]
[HKEY_LOCAL_MACHINE\SOFTWARE\Palm\Messaging\Prefs]
"NetworkProfile"="MMS"
"MmsGatewayAddress"="212.183.137.12:8799"
"MmsUrl"="http://mms.vodafone.co.uk/servlets/mms"
"UseManualNetworkSettings"=dword:00000000
"AutoDownloadMmsEvenIfRoaming"=dword:00000000
"AddMediaDontShow"=dword:00000001
"EmailCenterNumber"=""
[HKEY_LOCAL_MACHINE\SOFTWARE\Palm\Varnish]
[HKEY_LOCAL_MACHINE\SOFTWARE\Palm\Varnish\Messaging]
[HKEY_LOCAL_MACHINE\SOFTWARE\Palm\Varnish\Messaging\General]
"IsGSM"=dword:00000001
"ShowAdvancedPreferencesTab"=dword:00000001
"ShowSmsToMmsConvertWarning"=dword:00000001
"UseVodaphoneVoicemail"=dword:00000001
"ValidityPeriodAvailable"=dword:00000001
[HKEY_LOCAL_MACHINE\SOFTWARE\Palm\Varnish\Messaging\SMS]
"CanSendBlank"=dword:00000001
"MaxCharsPerMsg"=dword:000000A0
"MaxPartsPerMsg"=dword:0000000A
"MaxRecipients"=dword:00000014
"SMSCUseSIM"=dword:00000001
"SMSC"=""
"RequestDeliveryReceiptAvailable"=dword:00000001
"SMSEmailGateway"=""
[HKEY_LOCAL_MACHINE\SOFTWARE\Palm\Varnish\Messaging\MMS]
"MMSC"="http://193.254.145.140:8002/ "
"MMSUA"="MDA Vario/2.0/arcsoft-mmsua-3.2.0.xx"
"MMSUAProf"="http://www.htcmms.com.tw/tmo/mdavario-2.0.xml"
"MMSProxy"="149.254.201.135:8080"
"APN"="T-Mobile Internet"
"CanSendBlank"=dword:00000000
"CcBccSupported"=dword:00000001
"DefaultPageDuration"=dword:00001388
"IsPictResolutionLimited"=dword:00000000
"IsWAVSupported"=dword:00000001
"MaxAudioSize"=dword:0004B000
"MaxMsgSize"=dword:0004B000
"MaxPictHeight"=dword:00000000
"MaxPictWidth"=dword:00000000
"MaxRecipients"=dword:00000014
"MaxVideoSize"=dword:0004B000
"RequestDeliveryReceiptAvailable"=dword:00000001
"RequestReadReceiptAvailable"=dword:00000001
"AcknowledgeMsgRead"=dword:00000000
"AcknowledgeMsgReceipt"=dword:00000000
I'm going to proceed and edit the messaging portion of the reg file, and import it on my cell, however I don't really know how to approach the VARNISH settings.
What exactly are those?
Where did you make the changes to these new settings?
Did you make the network settings as "Manual" and enter these manually, or change the registry with these settings?
Thanks
OK, found a posting on TreoCentral that solves the MMS issue.... take a look
http://discussion.treocentral.com/showthread.php?p=1109428&posted=1#post1109428
Works fine for me!
MMS Sorted Send and receive (UK Tmobile)
Setting, Connections, Connections
add a connection (You may have one if you using GPRS on tmobile)
if not enter a name for the connection i.e Tmobile GPRS
modem Cellular Line GPRS.3G)
Access point general.t-mobile.uk
username - user
password - one2one
Finish
Start, Messaging, Menu, Options, Advanced,
Click Manual then edit
Message center number should already be there
Email Center number (Blank)
MMS Gateway - 149.254.201.135:8080
MMS URL - http://mmsc.t-mobile.co.uk:8002
Network Profile - Tmobile GPRS
I use the same profile as my GPRS Internet but some people just add one under connections called Picture Messaging or something along them lines.
I took a look at the registry file and changed it and got everything working but when you restart the phone settings default to the original ones which cause message to stop send and receiving.
I also took some pictures of some speed tests as I am getting over 1mb speeds.
I am so happy with my Treo 750v it was a good buy everything that I want is now working. more pictures in my next post.
Tried what yo have and still sits there at 10%
Can you put some screen shots up of your network settings
I have a T Mobile MDA (Wizard), unlocked on UK O2. I flashed to Faria Crossbow WM6 a while ago and everything is fine apart from getting MMS to work. I have manually input the network settings for WAP, MMS etc. but when sending error message states 'error synchronizing' and it stays in the outbox.
I downloaded the O2 operator settings cab file from the ftp site which always worked with WM5 but it doesn't add any settings in WM6.
Maybe unconnected but I used to have the G gprs icon before I flashed - haven't seen it since - any ideas?
what are your MMS settings that you're inputting?
MMS
Astraeu said:
what are your MMS settings that you're inputting?
Click to expand...
Click to collapse
I have the same problem too and Im on UK Vodafone...spoke to vodafone and checked all the settings and all ok.
May be something in the MMS Composer by Arcsoft!
Anyone else?
vonspurter said:
I have a T Mobile MDA (Wizard), unlocked on UK O2. I flashed to Faria Crossbow WM6 a while ago and everything is fine apart from getting MMS to work. I have manually input the network settings for WAP, MMS etc. but when sending error message states 'error synchronizing' and it stays in the outbox.
I downloaded the O2 operator settings cab file from the ftp site which always worked with WM5 but it doesn't add any settings in WM6.
Maybe unconnected but I used to have the G gprs icon before I flashed - haven't seen it since - any ideas?
Click to expand...
Click to collapse
have you tried manually entering both the GPRS and MMS settings from your carrier as opposed to a cab file?
I have the same problem with NBD 7.1 rom.
No problem with Core2.0
I'm using usual Vodafone MMS settings!
As writen above, do not rely on CABs (I had also a problem with one "MMS setting" CAB not doing it properly), do it manually...
I did it succesfully in XDA MOBILE 6 (making MMS connection in Setting > Connections > Connections and then setting its usage in Messaging).
It is more work, but it is safer.
Your operator certainly has some instructions (in my case I worked according to the instructions how to set it in WM5 on MDA III - they were still good for WM 6 on MDA Vario).
If you have problems in one specific ROM, post to that thread (maybe the coook screwed up/removed MMS).
Mirek
Ok so I get the fact that if you soft reset when it installs all of the bloatware then it will cancel the install. However, I have done search but the answer was not very clear. When I stop the bloatware from being installed, does that mean I going to have to cinfigure all of the mms settings and internet settings? If so then when were would I find those settings for the at&t tilt? Also, will the cellular video cab for the 8525 work on the tilt or does someone need to make a new version? Any answers on this stuff would be greatly appreciated and like i said earlier, the search did not really give me a definite answer.
did the search not give you a deffinate answer or just not the one your looking for? You can find the MMS and WAP setting by search for Cingular MMS settings on google and this forum and also the cingular video will work with MediaNet as your ISP settings.
It still has proper internet settings. Haven't check the MMS though...
or you can always boot it up normally with all the bloatware, copy all the settings, and then hard reset and do the anti-bloatware boot.
I read that the att.cab file is the settings cab which you can install separately after un-hiding the install cabs on the tilt...? can anyone verify this?
The soft reset upon initial configuration on the tilt should leave the media net (3g) settings in tact...i dont know about the MMS yet but text messages, internet and push email with my exchange server work fine right now.
If any of those settings need manual configuration, all those settings can be found here.
One thing I noticed is the connection profile MEdia Net does not have the proxy settings out the box. The support page will have you input those settings. I find it's not necessary with the auto proxy detect in place. Also using MEdia Net with proxy settings may not allow CV to work.
Doug2873 said:
The soft reset upon initial configuration on the tilt should leave the media net (3g) settings in tact...i dont know about the MMS yet but text messages, internet and push email with my exchange server work fine right now.
Click to expand...
Click to collapse
MMS works fine. The only thing you may want to do is download the enable and disable proxy cabs. Check out this thread on HoFo: http://www.howardforums.com/showthread.php?t=1257055
I am a long time reader newer poster. I am coming from a Treo 750. Is there anything I should do to this before I start adding my apps and transfering contacts? Is there a better backup of my Treo other than the Windows Vista Sync? I am mainly concerned with contacts and software. Also I am on Att I heard about the only thing I need to do is swap Sim card out, also should I adjust the wap settings for this to work. [email protected] password CINGULAR1. Also does it matter when syning new device the device name be the same? What is the best ROM I should have?
ATT
I also use att and all i have to do is set up the network to use media net and tell it under advanced to not use the proxy. It should work fine for you then. I am using Bepe rom 6.3 premium. The connection wizzard sets up right for ATT in the us except fothe proxy. you do npot have to enterthe wap settings they are there already.
Coming from my 750, I didn't have to do a thing - just stick in sim card and I was good to go. I am on the PDAConnect plan so no issues with proxies and such.
As for backup, use Sprite. It comes with the Cruise on the CD.
Thanks I will do that. I should have it in my hands tomorrow morning.
mpf54 said:
I also use att and all i have to do is set up the network to use media net and tell it under advanced to not use the proxy. It should work fine for you then. I am using Bepe rom 6.3 premium. The connection wizzard sets up right for ATT in the us except fothe proxy. you do npot have to enterthe wap settings they are there already.
Click to expand...
Click to collapse
I got my phone installed bepe rom premium, I thought I got all of the att settings correct I am able to receive sms and email but for some reason It only has edge when before the rom i was getting hsdpa and 3g speeds. can you please take me through a small tutorial of what excat settings I need in the connections panel. I have only 1 listed MEdiaNet I then went to the advanced network and it says: turn on HSDPA it is checked, GPRS PAP authentication is checked, CSD Line Type data rate 9600 bps(v.32) connection element Transparent, SMS Service SMS over GSM. What else do I need to do? Please help
Also under comm manager it shows no data connection available?????
I figured it out. I removed all settings and went through the connection wizard. Also I forgot to change the band type to auto, that is why I would only get edge speeds. I wasnt sure about the proxy settings, I was supposed to checkit not uncheck it. and found the server settings and port numbers. Thak for everything. This phone is so much better than the treo 750. Well worth the money. No more square screen for me.
Out of curiosity what do we need to set the proxy to? Is this for using tethering or something else? I am on ATT as well and the auto network configure app thing seems to have set it all up correctly. Is there anything additional to be done?
Hi All,
I've searched a bit in the forums and threads and tried some stuff but to no avail. I have a HTC Touch Pro 2 (unlock) bought in Taipei, Taiwan where I currently live. I use Chunghwa service with 3G and GPRS enabled. I put the latest Rhodium T-Mobile ROM for English as soon as I bought it.
I found out how to unlock the MMS Options server settings so I customized it to how Chunghwa had requested and I could start receiving MMS but when I try to send it fails (and takes a few minutes to time out while which is annoying too).
My settings from Chunghwa:
Under Messages->MMS Options->Servers
Gateway 10.1.1.1
Port 8080
IP: http://mms.emome.net:8002
emome server
300K
WAP 2.0
under settings->connections->connections
I setup emome server with:
apn = emome
both checks under proxy settings and Proxy is 10.1.1.1
and with advanced on the proxy I set the port to 8080
(shows up under HTTP as 10.1.1.1:8080
After all that it receives MMS but cannot send (stuck in outbox)
Anybody else seen this?
I've even tried adding "Wap2SendLimit4=6xxxx" which I found in another thread. no luck
more info
using Arcsoft v5.0.43.116. Came with T-Mobile ROM.
new 2 the forum
sorry if I put this in the wrong place. I'm new to the forum and still looking around. I've done many searches but to no avail.
Also have problems showing chinese font with the facebook app from Microsoft?
Really would like to get my MMS send working, its a feature I did actually enjoy using (even though I also use 3G unlimited data.
Chunghwa w/ Windows Mobile 6.1 and MMS
or does anyone know a Taiwan forum I can post my question?
or does anyone have a Chunghwa phone with Windows Mobile 6.1 and MMS working? I'd like to find out what Arcsoft version and registry settings they have to get it to work.
Thanks!