If you are confused with bootloader, please read this post
V4.8 beta (For bootloader 0.21.35 and 1.0.50)
1 Update OEM parts to 01.00.50.092.08(many thanks to vadv)
2 You dont have to update bootloader or flash Vodafone rom to use my rom.(1.0.50 BL only)
3 so... you can go back to your original rom for warranty.(1.0.50 BL only)
4 et9 IME (you can change to original adatxt by installing the cab file in root folder)
DL: http://www.mediafire.com/?g9fymokgf6n499a
====================================
Windows mobile 6.5 Standard Build 21854
Language: English / Chinese(CHS)
V4.1 beta (07/11/2009)
1 Update build to 21745 (from samsung B7320 rom)
2 removed ie mobile 6
3 try to fix sms freezen and no network issue.
4 EXT driver(ipaq file store) disabled. install enableEXT.cab in root folder if you want it.
Please help to test, thank.
Download: http://www.mediafire.com/?7b339716h212al3
====================================================
(For Suretype Keyboard Voice Messenger Only, not ipaq 512 514 518)
How to use this rom?
Please refer to HP's official update instructions
Be sure you have read all the HP's official update instructions, backuped your data(contact list etc.) before update.
This is a custom rom which will invalidate your warranty. Hikey disclaim all responsibility.
Notes:
1 hpRUU is not compatible with windows 7.
2 If you dont like my rom, you can find official rom on HP UK website.
3 If you have a rom version higher than 01.00.50.xxx, please do not flash your phone. dump your rom first.(method as below)
Low light controller for HP Voice messenger
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
iPAQ hard-reset:
1. Turning off the phone
2. Press the key number 6, and turn on your phone holding on the key number 6 until you see options to reset your phone - on screen with tiny letters. select number 1, and thats it, wait it to finish
Click to expand...
Click to collapse
It is no need to dump or upload your original rom, If your rom version is :
0.21.21.xxx
or 0.21.35.xxx
or 01.00.12.332.04.SHIP
I had reconstructed a 01.00.12.332.04.SHIP orginal rom, but only os part.
the rom can only work with the same version bootloader.
but I can not find a method to dump a bootloader from device.
So, please do not flash any rom, if you care about warranty.
================================================
How to dump your original rom
Tools: itsutils pdocread.exe from itsme
unzip to your C: driver
Ctrl + "R" to open run then "cmd" to enter a dos window.
type "cd \" enter
type "cd itsutilsbin-20090515" enter
use command pdocread -l to show parts address.
then pdocread -w -d DSK1: -b 0x800 -p Part01 0 0x360000 part01.raw
then pdocread -w -d DSK1: -b 0x800 -p Part02 0 0x5120000 part02.raw
the address (red and blue) is based on your pdocread -l response.
Code:
C:\Users\Hikey>cd \
C:\>cd itsutilsbin
C:\itsutilsbin>pdocread -l
Copying C:\itsutilsbin\itsutils.dll to WCE:\windows\itsutils.dll
169.63M (0xa9a0000) DSK1:
| 124.00k (0x1f000) Part00
| 3.38M ([COLOR="Red"]0x360000[/COLOR]) Part01
| 81.13M ([COLOR="Blue"]0x5120000[/COLOR]) Part02
| 85.00M (0x5500000) Part03
24.75M (0x18c0000) IPQ1:
| 24.75M (0x18bf000) Part00
488.50M (0x1e880000) DSK2:
| 488.50M (0x1e880000) PART00
.......
C:\itsutilsbin>pdocread -w -d DSK1: -b 0x800 -p Part01 0 [COLOR="Red"]0x360000[/COLOR] part01.raw
CopyTFFSToFile(0x0, 0x360000, part01.raw)
C:\itsutilsbin>pdocread -w -d DSK1: -b 0x800 -p Part02 0 [COLOR="Blue"]0x5120000[/COLOR] part02.raw
CopyTFFSToFile(0x0, 0x5120000, part02.raw)
part01 and part02 are enough, make a package and upload to www.mediafire.com or other website then send me a link.
I will make a flashable rom for you. when you want restore to original rom.
Thank you.
==========================
01.00.12.332.04.SHIP rom is here: http://www.mediafire.com/?eyztnm2zjwn
Only os part, not include bootloader.
You must use OS with the same version bootloader.
I can not dump a bootloader from device.
If you care of warranty, please do not flash any rom.(bootloader)
Just inherited one brad new HP IPAQ Voice messenger from my wife. Because she stole my Touch Diamond
She hates that she was unable to type swedish ÅÄÖ.
Could you maybe do a swedish ROM? Or just implement option of swedish keyboard layout in the english one.
My Touch Diamond hi res screen is soo superior to this one and i really want it back from her.
Hope your upload is done soon.
B.r.
SpooZ
downloading it now
thanks
did you noticed any problems with the rom?
Bricked my working phone so it now says no service. Seems like this rom is Vodaphone locked.
How do you unlock it???
Please Please.
I have the sameproblem,not connecting to the network. Phone is bricked
Please Hikey, can you correct the rom?
V4.8 beta
1 Update OEM parts to 01.00.50.092.08(many thanks to vadv)
2 You dont have to update bootloader or flash Vodafone rom to use my rom.
3 so... you can go back to your original rom for warranty.(new user only)
4 et9 IME (can change to original adatxt with cab in root folder)
DL: http://xda.b42.nl/Hikey/Roms/VM/VM_WM65_21745_Hikey_V4.8beta.zip
====================================
Windows mobile 6.5 Standard Build 21854
Language: English / Chinese(CHS)
V4.1 beta (07/11/2009)
1 Update build to 21745 (from samsung B7320 rom)
2 removed ie mobile 6
3 try to fix sms freezen and no network issue.
4 EXT driver(ipaq file store) disabled. install enableEXT.cab in root folder if you want it.
Please help to test, thank.
Download: http://xda.b42.nl/Hikey/Roms/VM/VM_WM65_21745_Hikey_V41b.zip
===================
V4 (31/10/2009)
1 SD card driver removed which make system unstable. back to original drivers.
(Install the SDHC_driver.cab in "Patch" folder if you have the card lost issue)
If your VM without card lost issue, It is not necessary update to this version.
2 WM5torage removed.
DL: http://rapidshare.com/files/300367267/VM_WM65_21854_Hikey_V4.zip.xml
Mirror: http://xda.b42.nl/Hikey/Roms/VM/VM_WM65_21854_Hikey_V4.zip
Flash the 0.21.35 bootloader if you have no network (no signal) issue.
You must format the "ipaq file store" to make hp ipaqdataconnect have a full list.
If you can not set your network connection, please format "ipaq file store".
If you dont know how to format it, you can disable it with disableEXT.cab (install then restart)
======================
V3.5 (18/10/2009)
1 Added all 7 available official patch. (Navigation setting available)
(refer to http://h20000.www2.hp.com/bizsuppor...sId=3806508&swLang=9&taskId=135&swEnvOID=4036)
2 updated SD card driver, try to avoid lose card issue. (thanks to [email protected]) (failed)
Download: http://rapidshare.com/files/294586086/VM_WM65_21854_Hikey_V35.zip.xml
Mirror: http://www.dbank.com/download.action?t=40&k=NjQxNjkx&pcode=LCw0NTg0Niw0NTg0Ng==
WM5torage not working in V3 and V3.5 Please reinstall it with the cab below.
I just notice that the Vodafone "0.21.35.151.01" ROM is newer than shiped "01.00.12.332"
So... we are using the latest drivers and radio.
====================================================
(For Suretype Keyboard Voice Messenger Only, not ipaq 512 514 518)
How to use this rom?
Please refer to HP's official update instructions
Be sure you have read all the HP's official update instructions, backuped your data(contact list etc.) before update.
This is a custom rom which will invalidate your warranty. Hikey disclaim all responsibility.
Notes:
1 hpRUU is not compatible with windows 7.
2 If you dont like my rom, you can find official rom on HP UK website.
3 If you have a rom version higher than 01.00.12.332.04.SHIP, please do not flash your phone. dump your rom first.(method as below)
Low light controller for HP Voice messenger
=====Old Verion=======================================
V3 (15/10/2009)
1 Update to Official WM6.5 release Build 21854(from htc snap official rom)
2 Added IE mobile6
3 Added modaco donew (You can create office file now)
4 Change IE cookie and history to "iPAQ File Store" (wont lost cookie & history when you flash next rom)
5 Added WM5torage (can be use to format your iPaq File Store folder)
6 I have made a backlight controller for VM users for reading in dark night.(buildin)
7 You can restart from quicklist now.
8 Added PHM RegEditer.
V3 Download Link1: http://rapidshare.com/files/293640069/VM_WM65_21854_Hikey_V3.zip.xml
Mirror 2 Mirror 3
V2 (24/09/2009)
1 Fixed keyguard, you wont answer or ignore call by mistake.
2 Updated gpsdriver to latest official patch.
3 Unlocked EXT driver, you can use it save your data now.(format it first)
V2 download link1 download link1
--------------
@bozhinov79
@Spooz
Please do not flash the official rom on hp uk website.
The rom is for vodafone only.(included bootloader)
My rom is os only.
I will make an another rom for you.
Click to expand...
Click to collapse
Edit: Solved
I too need a swedish room
Hikey, do you have any unbrand rom yet? i have a unbranded(eng version) voice messenger, but kinda new into this dumping rom thing.
SpooZ said:
Just inherited one brad new HP IPAQ Voice messenger from my wife. Because she stole my Touch Diamond
She hates that she was unable to type swedish ÅÄÖ.
Could you maybe do a swedish ROM? Or just implement option of swedish keyboard layout in the english one.
My Touch Diamond hi res screen is soo superior to this one and i really want it back from her.
Hope your upload is done soon.
B.r.
SpooZ
Click to expand...
Click to collapse
Hi hikey,
I already flashed the official uk vodafone rom and it works with my italian operator, it is not operator locked. That was the only solution to have a working phone.
I hope you will make your 6.5 rom soon
Is there any problem that this rom has a bootloader uncluded?
Hope to jear from you good news
Hikey said:
@bozhinov79
@Spooz
Please do not flash the official rom on hp uk website.
The rom is for vodafone only.(included bootloader)
My rom is os only.
I will make an another rom for you.
Click to expand...
Click to collapse
bozhinov79 said:
Hi hikey,
I already flashed the official uk vodafone rom and it works with my italian operator, it is not operator locked. That was the only solution to have a working phone.
I hope you will make your 6.5 rom soon
Is there any problem that this rom has a bootloader uncluded?
Hope to jear from you good news
Click to expand...
Click to collapse
ok . thanks for your solution .
how about try my rom again ?
maybe my rom must working with new bootloader
will try it again tonight and will report the results.
thank again for your help
anyway if you find a non vodafone branded official rom please let me know.
ok . thanks for your solution .
how about try my rom again ?
maybe my rom must working with new bootloader[/QUOTE]
Hikey said:
@bozhinov79
@Spooz
Please do not flash the official rom on hp uk website.
The rom is for vodafone only.(included bootloader)
My rom is os only.
I will make an another rom for you.
Click to expand...
Click to collapse
Too late for that.
Already flashed the 6.1 rom. But phone workes now.
Did notice that the vodaphone logo is appearing on bootup as it did in your 6.5 rom.
But atleast it's not network locked anymore.
Will try your new version tonight.
Hope you have removed all the Vodaphone stuff now.
Hi All
I have made a instruction for you to dump your original rom at first page.
you can backup your original rom with this.
nice guide. i am copying the raw files now. will PM you the link asap.
cheers
Hikey said:
Hi All
I have made a instruction for you to dump your original rom at first page.
you can backup your original rom with this.
Click to expand...
Click to collapse
cam_oai said:
nice guide. i am copying the raw files now. will PM you the link asap.
cheers
Click to expand...
Click to collapse
Thanks
What is your rom version show on the boot screen?
it says:
1.0.12.332.04
Hikey said:
Thanks
What is your rom version show on the boot screen?
Click to expand...
Click to collapse
cam_oai said:
it says:
1.0.12.332.04
Click to expand...
Click to collapse
Thanks a million.
Your rom is newer than Hp UK website rom.
Code:
REGEDIT4
[HKEY_LOCAL_MACHINE\ControlPanel\DeviceInfo]
"RomVersion"="01.00.12.332.04.SHIP"
"RomReleaseDate"="11/27/08"
[HKEY_LOCAL_MACHINE\ControlPanel\DeviceInfo]
"IPL_Version"="01.00.12.332"
"GSMFirmware_Version"="1.0.15"
"KeyBDrv_Version"="1.0.15"
"KeyBFirmware_Version"="1.0.15"
"KeyBSoftware_Version"="1.0.15"
REGEDIT4
[HKEY_LOCAL_MACHINE\ControlPanel\DeviceInfo]
"RomVersion"="00.21.35.155.01.SHIP"
"RomReleaseDate"="06/03/09"
[HKEY_LOCAL_MACHINE\ControlPanel\DeviceInfo]
"IPL_Version"="00.21.35.155"
"GSMFirmware_Version"="1.0.14"
"KeyBDrv_Version"="1.0.13"
"KeyBFirmware_Version"="1.0.14"
"KeyBSoftware_Version"="1.0.14"
does it means i can't flash wm6.5 from you?
cheers
Related
Universal WM6 ROM Kitchen
Finally I'm able to steal some time to upload this Kitchen, the intention is to get everybody involved and understand and maybe help with the development of wm6 for universal, and also everyone can built their own personalize universal WM6 ROM, hopefuly user or any rom modder sending some patch or registry modification or some part update to the kitchen...
Big Thanks to MAMAICH and also my friend Bepe, the two Genius on the forum I know...
Most of this Guide is taken from bepe's, and also some of the dev tool are taken from Bepe's, and ofcourse MAMAICH so credits goes to them also for his great method and tools!
lets start,
helmi
----------
ROM Kitchen is a tool to cook your personal Universal Windows Mobile 6 ROM by the packages you need.
Your Computer must have .NET Framework v2.0 installed!
THE KITCHEN:
Someone might need to mirror it somewhere?
ftp://xda:[email protected]/Uploads/Universal/helmi_c/helmi_uni_wm6_kitchen_r0.rar
OEM Pack Included in R0 Kitchen (Most of it part are newer then currently available rom):
Camera&MMS=3.5.1.5
CommManager=1.3.7.0
mHub=6.29.061106.I0
PicturesExt.dll=1.20.911.610
PowerService.dll=2.15.1.0
WirelessMgr_Service.dll=2.21.0.0
NETCF2_SP2= .NET Compact Framework 2 SP2
JAVA
SIM_Mgr=5.30
STK_Service.dll=4.47
StreamingMedia=2_10_1025621
Zip=1_20_25226_1
ps: the kithen is ready to build vanilla version, just
1. Click createos.exe
2. Click start button (createos.exe dialog) wait till its finish.
3. Click CreateROM.BAT, click encode, browse nk.prj, set operator
4. flash....Done.
OEM PACK:
I'm just too lazy to link them one by one...
BTFtp=1_1_27419_1
BTSapProfile.v1.45
CambridgeMSBTPlug-In
HtcWmpPlugin
Indialler_Phonepad_15_Language
MS.VoiceCommand=1.6_UNIVERSAL
OneNoteMobile=12.0.4518.1010
Pocket_MSN
PocketXPDF=0.50
Resco_Explorer 5.42
SDDaemon_UNIVERSAL
StowawayBTMouseKeyboard
SymbolPad=1_0_24075_1
Szilamer_BubbleFix
Szilamer_WordSuggestionFix
TaskManager=1_0_27407
USB_HDD
VGAMode
VOIP
WinliveVGA
WM5torage 1.7.3
WM6_CustomerFeedBack
NETCF2_SP2
JAVA
Zip=1_20_25226_1.rar
more will be added by others maybe? TOMTOM? SPB PLUS?, wiki page might be ideal for this...
How-To build a ROM:
1. Extract the kitchen pack to the c:\DEV folder (create the folder if u dont hv it)
2. Extract OEM Packages you need to OEM folder
3. Run CreateOS.exe and click the button
4. Run CreateROM.bat, proccesing....
5. HTC64_Extended_ROM_Tool.exe will start, click encode, then browse for C:\Dev\Helmi_UNI_WM6_Kitchen_R0\Temp\nk.prj then click next.
6. Set ur operator in operator name text field, default is set for 02 (02__01) u might change this to TMOB, MDL, etc then click encode when u finish to convert nk.nba to nk.nbf, the nk.nbf (ROM) will locate at C:\Dev\Helmi_UNI_WM6_Kitchen_R0\Temp folder.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
7. ROMUpgradeUt.exe will start to update the rom to ur device or u might cancel if u planning to update latter.
Done! U Just create ur personal Universal WM6 ROM!
How-To build ur own OEM Package:
An OEM Package is just a simple folder containing files and registry settings for the ROM
First of all you'll need a GUID number for your Package.
Go to http://www.famkruithof.net/uuid/uuidgen to get one.
In my case:
283b9db7-cb03-4c1b-820e-ca49b2c3b5db
Necessary steps:
1. Create a new folder:
Dev/OEM/[Your package name]/
2. Create a empty text file:
Dev/OEM/[Your package name]/283b9db7-cb03-4c1b-820e-ca49b2c3b5db.dsm
(CreateOS.exe will finish this file for you)
If needed:
3. Create an UNICODE text file:
Dev/OEM/[Your package name]/283b9db7-cb03-4c1b-820e-ca49b2c3b5db.rgu
This file could be used to add registry entries to the ROM
First line is:
REGEDIT4
...
and there MUST be a empty line at the end!!
4. Create an UNICODE text file:
Dev/OEM/[Your package name]/initflashfiles.txt
This file could be used to create folders or copy files, shortcut on the ROM.
For Example/ Ilustration: Open or read Dev/LOC/initflashfiles.dat using a text editor or any premake initflashfiles.txt at one of the OEM folder.
and there MUST be a empty line at the end of iniflashfiles.txt also!!
Copy all files you need to Dev/OEM/[Your package name]/
How to change Universal paging pool SIZE:
Open nk.nba with hex editor and search for hex 64B00000640000002E2E2E2E00002E00 with 2E as a joker string and the last 2E00 is ur paging pool size. or just goto offset 51A502 and start mod ur paging pool see ilustration bellow:
the picture show us 4.8mb(48) paging pool (standart) change to 60 (6mb), 70(7mb), or any size u like.
How to fake ur CE version and OS Built
(only if u kinda person who like to fake stuff, not recommended thought)
How to fake ur CE version:
open nk.nba/nk.fat with any hex editor and go search unicode string 2.00.02 (the real version) or goto address 477C and 31437C and modify to any version u like, 2.99.99 or 2.00.99 or 2.01.06 or 2.01.08 or maybe 9.99.99? if u like... but still, its a fake, well its up to you...
Ilustration picture:
How to fake ur OS Build:
convert shellres.dll.0409.mui module (dir) to file and edit string 918 at resource ID 14683 and 14684 to any OS version u like, u'll have OS build 10.10 (Build 99999) OS if u like...but still, its a fake, well its up to you...
Ilustration picture (u'll hv OS 10.50.9999 (Build 99999) isn't amazing? more update then ms one...:
How to cook ur Extended_ROM
I'll update someday, running out of time...
Well, the kitchen and also some instruction (hopes u guys understand) are here now, so? why dont you guys built ur own personalize WM6 ROM...??
I hope more people will understand and gettin more involved and helpful with rom making stuff after this, and more people will support each others with bugs and updates... lets work togather guys... next would be AKU3.3 and AKU3.5 kitchen if I hv time...
hopes that i'm not forgot about something...lol...
regard,
Helmi
EDIT:
Added wiki page by my old buddy GerardNL, Thanks GerardNL, my friend...
Kitchen WIKI:
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal_WM6_Kitchen_Helmi
the link doesnot work.
what a great guide, but can't download the kitchen..
ftp://xda:[email protected]/Uploads/Universal/helmi_c/helmi_uni_wm6_kitchen_r0.rar
Link above is working, file download ok for me. File not corrupt.
Helmi
What a great gift ! It makes a little bit easier to understand how to make something face our particular needs. a way to make everyone happy with the parameters and applications he likes. by default.
Thank you !
WoOoOoW. CoOoOoL.
Will download, learn and try.
You have disappear for too long. Beside this kitchen, any new ROMs with Video Call Working?
Very Very thanks from Italy.
helmi_c said:
Most of this Guide is taken from bepe's, and also some of the dev tool are taken from Bepe's, and ofcourse MAMAICH so credits goes to them also for his great method and tools!
http://buzzdev.net/index.php?option=com_simpleboard&Itemid=59&func=view&id=23392&catid=64
Click to expand...
Click to collapse
One matter.
This link doesn't work.
One Question.
One Wizard to translate the roms is it possible?
2nd problem.
I try this:
ps: the kithen is ready to build vanilla version, just
1. Click createos.exe
2. Click start button (createos.exe dialog) wait till its finish.
3. Click CreateROM.BAT, click encode, browse nk.prj, set operator
4. flash....Done.
Click to expand...
Click to collapse
At 3th point after I Browse nk.prj I click Encode and I've this error:
Hi Helmi_C
The link is working for me.
Thank you for the kitchen, great work!
Greetings, Leo
Broken FAQ link
http://buzzdev.net/index.php?option=com_simpleboard&Itemid=59&func=view&id=23392&catid=64
Is the page you Link to Helmi.. I cant call it up either!
cicciocant said:
2nd problem.
I try this:
At 3th point after I Browse nk.prj I click Encode and I've this error:
Click to expand...
Click to collapse
I get the same error code as well!
thx .............
Great Job , Thanks
cicciocant said:
2nd problem.
I try this:
At 3th point after I Browse nk.prj I click Encode and I've this error:
Click to expand...
Click to collapse
Juggles said:
I get the same error code as well!
Click to expand...
Click to collapse
did u guys extract the kitchen to c:\dev ? so the end result should be C:\Dev\Helmi_UNI_WM6_Kitchen_R0, the error is because the nk.nba cant be found... the nk.nba should locate here C:\Dev\Helmi_UNI_WM6_Kitchen_R0\Temp\Nk.nba
cicciocant said:
Very Very thanks from Italy.
One matter.
This link doesn't work.
One Question.
One Wizard to translate the roms is it possible?
Click to expand...
Click to collapse
yes, the link to buzz is dead, I'll erase it...
if you hv another LOC (Localization MUI) it should possible, btw darkforce hv post a rom with many language? u can take its MUI and HTM help file with another language. just replace the loc folder with foreign LOC.
helmi_c said:
yes, the link to buzz is dead, I'll erase it...
if you hv another LOC (Localization MUI) it should possible, btw darkforce hv post a rom with many language? u can take its MUI and HTM help file with another language. just replace the loc folder with foreign LOC.
Click to expand...
Click to collapse
the mui and htm only can replace by OEM folder , in LOC not enough for that,special for IMU very difficult to replace,also need to edit reg key
helmi_c said:
yes, the link to buzz is dead, I'll erase it...
if you hv another LOC (Localization MUI) it should possible, btw darkforce hv post a rom with many language? u can take its MUI and HTM help file with another language. just replace the loc folder with foreign LOC.
Click to expand...
Click to collapse
Thx. I Solved.
TO translate Can I Take the .mui file from Wm5 Aku 3.5 Italian ROM by fly?
It's very difficult?
Ufone Operator ID
Hello Helmi thanks for the Kitchen and love you for the 1.1 Rom.
Can you tell me how to set Operator ID for Ufone in pakistan because I have never been able to successfully change the code that I get "41003" in the phone app even after editing the nbf in WM5 Himalaya Roms as well.
Do I write Ufone_41003 in the Operator Id line or what?
Here is what I get from running CreateOS.exe with extra included (see attached).
Running CreateROM.bat prompts for missing default.hv, boot.rgu which I copy from somewhere in the kitchen. But prompts for Boot.hv which is no where to be found. (Can find in my PPC).
What did I do wrong?
But still able to continue to get nk.nbf. Can flash this? Is this same as Helmi-WM6-v1.1?
i don't know how you guys do it, but thanks very much all of you!!!!
Wow......Great job!
I had been waiting for it for a long time.
http://forum.xda-developers.com/showthread.php?p=1159759#post1159759
Thanks......
I managed to crack the ROMupdate.dll of the hpRUU primarily because there is no RUU for iPAQ 512 with SKU ID #UUF. It has ROM Revision 1.08 and the rest of the iPAQ 512/514s out there have an update with ROM Revision 2.05.0X
This will also work if you want to update your iPAQ 512/514 to another language. Here are the steps:
1. Download your desired iPAQ 512/514 ROM update
2. Unpack the RUU files by executing the SPXXXXX.exe file
3. Click next until you see green screen with 'iPAQ Update Utility'
4. Cancel the 'iPAQ Update Utility'
5. goto C:\iPAQ\SPXXXXX and change ROMupdate.dll with the attached file
6. Run hpRUU.exe from the same folder and proceed with updating your iPAQ 512/514
Enjoy!
EDIT: Flash at your own risk.
Very nice...
By the way, I've seen you've patched it...
What exactly did you patch? Does it skip the SKU check? Or did you do something else?
TryOG said:
Very nice...
By the way, I've seen you've patched it...
What exactly did you patch? Does it skip the SKU check? Or did you do something else?
Click to expand...
Click to collapse
I just made it skip SKU check.
I was doing some reading and plan to develop a tool to un-encrypt and encrypt the HP ROM file. Since you mentioned earlier that our HP device is manufactured by CMCS, I was looking at CMCSIMG tool. BUT, I think there is an additional encryption by HP like what he did for other IPAQs.
It would be nice if we have this tool working; so, we can start working on cooking for this device.
Plz Man Make the tool
tjlabais said:
I just made it skip SKU check.
I was doing some reading and plan to develop a tool to un-encrypt and encrypt the HP ROM file. Since you mentioned earlier that our HP device is manufactured by CMCS, I was looking at CMCSIMG tool. BUT, I think there is an additional encryption by HP like what he did for other IPAQs.
It would be nice if we have this tool working; so, we can start working on cooking for this device.
Click to expand...
Click to collapse
Yo Man Please do that man by the way whats that CMCSIMG supposed to do .
when i use pdocread.exe to get part02.raw and viewimgfs i get 70mb but i use imgfstodump i get 107mb dump folder with all the rom contents then i use imgfsfromdump to get Part02.bin can this bin be flashed to device like htc typhoon using MiTTy and DBSloader ?
and Decrypting The Nbf What tool do you use and as for the password wouldnt it be CMCS or Debussy or yssubed just like htc did with xda2nbf the himalayas nbf pass was himalaya in reverse
if u compare hp ipaq 514 with cmcs the specs are identicle
maybe the difference of 107mb vs 70mb is due to the processing of recmod.exe (its that file responsible for generating the actual files from modules with corrected PE headers)
I didn't use imgfsfromdump tool, I just use the ordinary mamaich tool because it does the job.
we have a very slight problem of flashing using pdocwrite. When you change the content of IMGFS and XIP, their overall size changes thereby causing them to be written to supposedly different ROM addresses respectively. which calls for an additional step of computing and modifying their location and references.
that's why we need the encryption and decryption tool, BUT i'm really swamped with work right now. can't find time to sit and look at it.
you just can't switch one ROM from a device to another device because it contains drivers specific to a device. You need to cook ROM (combine ipaq 510 series drivers with new OS files)
cmcsimg tool is from manufacturer cmcs. It's their own encryption tool used in most devices they manufacture, not necessarily HP. HP have their own encryption tool as well... I haven't recognized the format yet.
Thankz
The HP IPAQ 514 is The CMCS if you open The Part01.raw with win winrar file viewer at the bottom seems to be a log written by the development it has diffrent dates and what changes where made etc i will try and log later and it says the debussy is the codename for the ipaq Voice Messanger Series The Header for Part01.raw is the same as smarphone.nb0 emulator image im going to google mayb the debussy goes under another brand name.
Firmware 2.05 vs 2.08 its Wierd Because the 2.08 Dump Part01.raw seems to have an older log dat which is march 2007 whilst 2.05 is July 2007
The Log
i Attached a text file when i try cmcsimg i get header not b000ff
debussey
http://www.phonescoop.com/news/item.php?n=1780
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thats it
If you compare both device its the same Just The DBS has a diffrent Look. After Googling i Check They Say the CMCS has WM5.0 so it was originaly wm2003 in 2006 and then wm5.0 then wm6 it was ment for T-Mobile but ended up being modified for hp no wonder it had a resololution of 176x220 because back in the wm2003 days QQVGA was the standard So it Quite an Old Device in Design
can you get hold of a ROM encrypted using CMCSIMG tool? that would be the first step to see if our ROM update really uses CMCSIMG for encryption.
CMCSIMG.exe is fore *.img files
The main ROM file's formats.
CMCS Image. Files with *.img extension. That's the format of the upper level. Actually used while flashing. It's a coded BIN (B00FF) format version (see below). Another possible extension is *.rom - the same *.img but additionally coded with the special utility. It can not be used for flash procedure with the standard flash utility because it should be decoded before or the special flashing utility is to be used.
CMCS RSA Image. That's the format of the "upper" level. Actually used while flashing MPx220. It's a coded the ROM IMAGE format.
BIN (B00FF). Files with *.bin extension. This format is generated while creating the ROM with M$ Platform Builder. It contains the data blocks, the destination address of each data block in the ROM and the checksum of the data block.
RAW, ROM IMAGE. Files with *.img, .bin, .raw, .hex, .dmp. extension. It's memory image in FLASH/ROM as the CPU interprets it. You need to know the exact address of each image. The info about it is usually contained in the file name, attended text file or nowhere at all...
Very often the FLASH/ROM file is distributed as a built into installer file. Usually you can find a flash file by itself in the Temp folder straight after starting such kind of distribution file. The flash rom file has a size from 20 to 32 Mb (with new devices - up to 64 Mb) and it has .nbf, .bin or .img. extension. In each case you should define your own way of work with the file.
More INFo HERE
a few bootup keys
Power up with these keys pressed:
vol up: loads bootloader from ROM (not flashrom)
vol down: boots into updater, install modem driver to issue AT commands.
I did not jet figured out what you can do here...
Middle joypad button: hard reset to factory settings.
* + # : enable debugging! (but where can we play???)
Intesting
sony66 said:
Power up with these keys pressed:
vol up: loads bootloader from ROM (not flashrom)
vol down: boots into updater, install modem driver to issue AT commands.
I did not jet figured out what you can do here...
Middle joypad button: hard reset to factory settings.
* + # : enable debugging! (but where can we play???)
Click to expand...
Click to collapse
Volume Down + Power Key I Get DBS Loader
+ Mitty u Get
XKLLT-0-2050-4017-0.XKL As on The Pic is also used in RoverPC N1 -> C:\N Rover\boot\cmcsimg\cmcsimg.exe" DVD-3-0430-0080-0.xkl DVD-3-0430-0080-0.bin Check Here
sony66 said:
Power up with these keys pressed:
vol up: loads bootloader from ROM (not flashrom)
Click to expand...
Click to collapse
When i Press Vol Up + Power i Get 0.00.00 instead of 2.05.00
S
sp38077.exe
Files Contained In PLT_2.05.00_1007.BLOSGSM.nbf Are:
*PLT-0-2050-1007-0-A01.mlf
*DBS-FL-0760.m0
*PLT-0-2050-1007-0.MAX
*DBS-XL-0760.xl
*DBS-YL-0760.yl
*DBS-BL-0760.bl
*DBS-1-1080-000.gsm
*PLT-0-2050-1007-0.MBR
*PLT-0-2050-1007-0.ULD
*PLT-0-2050-1007-0.XKL
*PLT-0-2050-1007-0.OS0
*PLT-0-2050-1007-0.OS1
*PLT-0-2050-1007-0.OS2
*PLT-0-2050-1007-0.OS3
*PLT-0-2050-1007-0.OS4
*PLT-0-2050-1007-0.OS5
*PLT-0-2050-1007-0.OS6
[Package Download Profile]
PROFILE VER = 1.0
MODEL = DBS
VERSION = 2.050
PACKAGE NUMBER = 14
NEW PACKAGE INFO = 0
[Package Info Main Body]
IMAGE FILE = SKIP THIS SETTING BUT DO NOT MODIFY THIS SECTION
[Package Info Main]
IMAGE FILE = PLT-0-2050-1007-0.MAX
[Package Info 1]
IMAGE FILE = DBS-XL-0760.xl
START ADDRESS = 0
INDEX = 1
[Package Info 2]
IMAGE FILE = DBS-YL-0760.yl
START ADDRESS = 0
INDEX = 2
[Package Info 3]
IMAGE FILE = DBS-BL-0760.bl
START ADDRESS = 0
INDEX = 3
[Package Info 4]
IMAGE FILE = DBS-1-1080-000.gsm
START ADDRESS = 0
INDEX = 4
[Package Info 5]
IMAGE FILE = PLT-0-2050-1007-0.MBR
START ADDRESS = 0
INDEX = 5
[Package Info 6]
IMAGE FILE = PLT-0-2050-1007-0.ULD
START ADDRESS = 0
INDEX = 6
[Package Info 7]
IMAGE FILE = PLT-0-2050-1007-0.XKL
START ADDRESS = 0
INDEX = 7
[Package Info 8]
IMAGE FILE = PLT-0-2050-1007-0.OS0
START ADDRESS = 0
INDEX = 8
[Package Info 9]
IMAGE FILE = PLT-0-2050-1007-0.OS1
START ADDRESS = 0
INDEX = 9
[Package Info 10]
IMAGE FILE = PLT-0-2050-1007-0.OS2
START ADDRESS = 0
INDEX = 10
[Package Info 11]
IMAGE FILE = PLT-0-2050-1007-0.OS3
START ADDRESS = 0
INDEX = 11
[Package Info 12]
IMAGE FILE = PLT-0-2050-1007-0.OS4
START ADDRESS = 0
INDEX = 12
[Package Info 13]
IMAGE FILE = PLT-0-2050-1007-0.OS5
START ADDRESS = 0
INDEX = 13
[Package Info 14]
IMAGE FILE = PLT-0-2050-1007-0.OS6
START ADDRESS = 0
INDEX = 14
Ver2.20 CMCS Download Firmware Image. Build Date : 2007 November 21
The NBF Contains Lots Of Data Sections With The Above As The Header For Each Section
Section 1 offset DC7520
Section 2 offset 8EF2EE
Section 3 offset 8EF986
Section 4 offset BA407E
Section 5 offset E79D56
Section 6 offset 16C23BE
The ipaq514 is the same as the RoverPC M5 (sold with WM5)
Somewere I read that someone cooked a wm6 rom for the RoverPC M5 but faled to find any details of this.
What command did you type to get that output?
Yeah Progress
sony66 said:
The ipaq514 is the same as the RoverPC M5 (sold with WM5)
Somewere I read that someone cooked a wm6 rom for the RoverPC M5 but faled to find any details of this.
What command did you type to get that output?
Click to expand...
Click to collapse
At + L was the command
you right its the rover pc m5 here is the cooked wm6 rom http://translate.google.co.za/trans...overPC+M5+wm6&hl=en&client=ms-opera-mini&sa=G
hmmm.... hp has sometimes its own encryption. For example, the hp rw6828 has the same hardware as xda atom, but it formatted its ROM in a different way so it can't interchange it's updates with xda atom. Then hp encrypts it with its own too; so, you won't go unpacking all the goodies it has included in its ROM.
But for rw6828, the encryption was a mere alteration of the main file header and the header of each section; thus, by removing it you can already unpack the hp ROM pretty much like the xda atom.
hp never uses a file convention. It uses nbf interchangeably with a variety of formats it can think of.
THE RoverPC
The RoverPC M5 USES WMIPL.DIP + WMUPDAT.DIP To Flash the phone The Same as IMATE SPL IF You Open Rover M5 WMIPL.DIP You Can See its ment for the IMATE SPL Because its Got Omap 730 text blah blah here are ROVERPC M5 Official Roms FTP
Im going to try use IMATE SPL Cooking Tools.
Can Some Translate That Russian Text In the FLASH.txt it contains information on how to Flash with SD
Tool To Create DIp
http://rapidshare.com/files/96517662/Constructor_M5.7zThis is the tool that was used to create WM6 Rom for RoverPC M5
defcomg said:
The RoverPC M5 USES WMIPL.DIP + WMUPDAT.DIP To Flash the phone The Same as IMATE SPL IF You Open Rover M5 WMIPL.DIP You Can See its ment for the IMATE SPL Because its Got Omap 730 text blah blah here are ROVERPC M5 Official Roms FTP
Im going to try use IMATE SPL Cooking Tools.
Can Some Translate That Russian Text In the FLASH.txt it contains information on how to Flash with SD
Click to expand...
Click to collapse
Roverpc m5
this site says roverpc m5 using omap 850 and all specs are same as ipaq514
Vox Rose Kitchen 2.0 [WM 6.0 + 6.1 + 6.5]
I present to you my new Vox Rose Kitchen v2.0.
It now supports the Vox and the Rose.
The downloads here will be Vox specific only. All the ROM, SYS and OEM folders will only work with the Vox.
For the Rose version go here!
For all things you can do with the kitchen, please look at the thumbnail!
Requirements:
dotNET Framework (at least 2.0)
Microsoft Visual C++ 2008 Redistributable
Windows XP or higher is recommended (SplashMaker doesn't work under 64-bit operating systems)
Kitchen has to be located like this: %systemdrive%\Vox Kitchen\... -- So in the "Vox Kitchen"-folder should be the exe and all the folders (OEM,SYS,ROM,TOOLS)!
Downloads:
The download comes in two parts!
First is the TOOLS folder and the "Vox Rose Kitchen 2.0.exe".
The second part are the ROM, SYS and OEM folders.
General Downloads (always needed):
Download exe, bat and TOOLS folder
just click on install and it will unpack it to your system drive\Vox Rose Kitchen
Downloads for WM 6.0:
Download ROM + OEM + SYS for WM 6.0
Downloads for WM 6.1 (should be20282.1.3.6):
Download ROM + OEM + SYS for WM6.1 (Rose folders)
Neo-Package (replace the SYS packages)
WM 6.1 Languages
Downloads for WM 6.5:
Download ROM + OEM + SYS (21854.5.0.80 "Official" files)
Download ROM + OEM + SYS (23017.5.3.0)
Changelog:
v1.2 -> v2.0
updated the whole kitchen to be compatible with the Rose (S740)
made extracting a lot easier (therefore I removed the wizards), also gives you the XIP of the ROM
automatically implants xip when you place a xip.bin in the ROM folder (therefore I removed the XIP wizard, but it's still in the tools folder)
updated the build wizard accordingly
some new graphics
If you want to use the batch version, you'll have to use the old v1.2 where it's still included, but without the benefits of automatic xip implantation -> download 1.2
And of course Thanks to Dr. G!!!
The Building Process
Fire up "Vox Rose Kitchen.exe" in the normal kitchen folder ("C:\Vox Rose Kitchen") and go to the build tab. It'll look like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The first step is to start G'Reloc and check if the values are right for the Vox (look at the picture) and click on "Do it"!
If you are cooking with WM 6.5 you might get errors, because G'Reloc isn't ready for Wm 6.5. In this case you click OK and then "Do it!" again and it'll tell you which module is producing the error. You can now either go to that folder and use Unlocker to unlock the "tmp"-file and delete it and then click "Do it!" again to keep going or you use recmod to make a file out of the module (better if you are cooking more then once). I recommend the recmod path it's easier and faster once you've eliminated all "bad" modules!
The WM 6.5 package I supply has all modules already fixed, so you don't need to worry!
When G'Rleoc is done (it might look like it hangs and then unexpectedly is done), you can close it and continue on with BuildOS. Here you can choose what to include and what not to include (only OEM packages, if you don't want certain languages (all the xxx_LANG_0XXX folders) or SYS packages you'll have to delete them manually! Please do not remove the package I have marked in the picture, unless you are re-integrating customer service (but why would you ).
Click on the green play button once you have selected everything you want! It'll say done at the bottom once it's done!
When it's done you can close it and click on "Create Vox ROM".
This will automatically insert a xip into the new ROM if there is one present in the ROM folder (xip.bin). You don't need a new XIP for 6.1 and I integrated the right one in my WM 6.5 package. So basically you don't have to worry about XIPs.
The cmd window will do everything on it's own and it's done when the window closes itself. You now have a OS.nb in the temp folder.
Now open then "Start HTC ROM Tool" and click on "Build!":
Under "Device" choose Excalibur.
Change the "Version" to what ever you want and leave the rest alone.
Then select a OS and choose the OS.nb in the temp folder.
Then click on "Build" and save the ROM in TOOLS\VoxFLASH and you are done with cooking!
Welcome back!
May you indicate the SYS-XIP included for every WM?
Thank you very much, frauhottelmann! Very long waited kitchen under WM6.5. Great work!
I added the build numbers, but I don't remember WM 6.0 build...
I have been waiting for WM6.5 kitchen for a long time. Great minds will come to work again.
cooking 6.5 will be fun.
Thanks!!
Thank FMs..did you have a good time in scotland?
I just ahd a quick look at this and...I got no chance lol
Thanks fh, was waiting for it, hope you had fun on your vacation
Hello, guys...
I´m completely new to Vox world, I´m coming from Excalibur, and I want to know if I´ll be able to backup my current rom with this tool. Also, I want to know if it´ll be possible to restore this backup if something goes wrong with a WM6.5 upgrade, for example.
I´m currently using WM6.0 Stock ROM. My vox never saw another rom in it´s life.
Also, is there a step-by-step guide to do this backup/restore procedure? I found some articles (using the search tool), but they seem to be incomplete or outdated. I´m really afraid of bricking my expensive device.
Thanks in advance.
Regards.
I uploaded the folders from my "Official" WM 6.5 ROM.
Updated to version 2.0 check first and second post for details!
Spoiler: automatic xip integration and new tutorial on cooking!
hi frauhottelmann
can i build a wm6.1 vox spanish rom with all the files available in the 1st post?
Also, where could I get a spanish language for building the rom?
thanks,
WM6.5 Offical V1 built and my phone hangs in bootloader splash for infinite time (I tried waiting for more than half an hour then gave up installing original HTC WM6 update)
I tried disabling the options for third party software (first 4 in the list) but still it hangs in startup screen.
From official word it seemed to me that it has stock WM6.5 icons form microsoft but later seeing "Clean" rom screenshots i became sure that the "official" will much look the same.
Regards
Moeen
kabeza said:
hi frauhottelmann
can i build a wm6.1 vox spanish rom with all the files available in the 1st post?
Also, where could I get a spanish language for building the rom?
thanks,
Click to expand...
Click to collapse
No, there are no Spanish files, I don't have them all.
dark_prince said:
WM6.5 Offical V1 built and my phone hangs in bootloader splash for infinite time (I tried waiting for more than half an hour then gave up installing original HTC WM6 update)
I tried disabling the options for third party software (first 4 in the list) but still it hangs in startup screen.
From official word it seemed to me that it has stock WM6.5 icons form microsoft but later seeing "Clean" rom screenshots i became sure that the "official" will much look the same.
Regards
Moeen
Click to expand...
Click to collapse
Don't know, what you're doing wrong, but I didn't change anything from my ROM to the kitchen, so it should boot (and nobody complained yet).
Otherwise please try v1.2 (download) and build the ROM with that version. I haven't tried v2.0 with the Vox, but it should work.
What do you want to tell about the icons?
frauhottelmann said:
No, there are no Spanish files, I don't have them all.
Click to expand...
Click to collapse
Any way to get plain files for translating into spanish? or most are built without source
frauhottelmann said:
No, there are no Spanish files, I don't have them all.
Don't know, what you're doing wrong, but I didn't change anything from my ROM to the kitchen, so it should boot (and nobody complained yet).
Otherwise please try v1.2 (download) and build the ROM with that version. I haven't tried v2.0 with the Vox, but it should work.
What do you want to tell about the icons?
Click to expand...
Click to collapse
I just installed clean v3.0 of WM6.5 and it has the original icons so my problem is solved in that regard.
Any way to get plain files for translating into spanish? or most are built without source
Click to expand...
Click to collapse
I have French, Czech, Italian, Greek and Polski/Polish localisations but unfortunately i dont have spanish localisation for Windows Mobile standard
Any fix to change sliding panel to default HTC one rather using Titanium (its slower than HTC's Sliding panel)
Could you please upload the WM 6.0 ROMs and OEM + SYS, but now using a *.zip or *.rar format, because the installer that you're using is crashing on my Windows Vista.
nathanpc said:
Could you please upload the WM 6.0 ROMs and OEM + SYS, but now using a *.zip or *.rar format, because the installer that you're using is crashing on my Windows Vista.
Click to expand...
Click to collapse
You can unpack the exe files with 7zip instead of the installer.
When I tried what I got was this:
Code:
Can not open file 'C:\Program Files\Vox Kitchen\oem_sys.exe' as archive
And the same for the rom.exe
That sounds like a corrupted archive then. Try re-downloading. I couldn't upload right now anyway!
Hello everybody!
It's finally there: Windows Mobile 6.5 for the Samsung GT-C6625 Valencia (English)!
- This is the FIRST English Installation Guide translated and made by myself (Thekn)!
- This is also the FIRST WM 6.5 English Development Thread!
There are four versions:
WM 6.5: 21745, 21854, 23017, 28004
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
--------------------------------------------------------------------------------------
WM 6.5 Release Notes (this is just a google translation)
1. Integrated Plum Input, Phonetic Search, and IP Dialing
2. 12 M Microsoft Elegant Black Font
3. Quick List add Restart option
4. Integrated SIM Card Manager, Notepad 3.2, Title Bar Clock, Unit
Converter, JAVA, Resco Explorer 2007 (unregistered) and Registry Editing
software
5. Registry optimization, Integrated, and Delicacy Theme Titanium
6. GPS testing will no longer use this forum to provide the finished version
of the users, reduced to English
7. The hook warning tone provided by other Forum users should compare
the current compromise solution
8. Retention MSN and Windows Lives
9. Streamlining some of the English version of the software and the color
and theme unused
10. In addition to 28,004 outside the WM6.5 ROM version 6.5 are integrated
color Menu
------------
Part of the version of the Source SYS
1. 21745 official 6.5 from I637
2. 21854 from HTC's snap
3. 23017 and 28004 from the network, specific unknown
4. 20758 from the original English rom C6625
--------------------------------------------------------------------------------------
All credits go to the C6625 Forum at www.zn520.com!
http://www.zn520.com/viewthread.php?tid=2545&extra=page=1&orderby=replies
--------------------------------------------------------------------------------------
Installation Guide
FIRST OF ALL: BACKUP ALL OF YOUR DATA AND FILES, YOU CAN USE A NICE PROGRAM CALLED SPRITE BACKUP
(http://www.spritesoftware.com/products/sprite-backup/full-edition)
ALSO I AM NOT RESPONSIBLE FOR ANY DAMAGE DONE TO YOUR DEVICE BY FLASHING THIS ROM
FOR RESTORING TO THE ORIGINAL FIRMWARE LOOK DOWN AT THE RESTORING PART
Requirements:
- The RAR file
http://www.zshare.net/download/7596057276bfeb69/
http://www.megaupload.com/?d=UJA5XBCE
password: Thekn
- A Windows XP Machine (I tried it on Windows 7 but it didn't worked for me)
Installation:
- Extract the downloaded RAR file (there will be 3 maps)
- Go the the BIN Files map and choose one of the maps containing .bin files
(I think 28004 is the latest).
- Grap the .bin file you want and copy it into the ROM folder.
- Copy or Cut the ROM folder to the root of your HardDisk (C:/ROM)
- Copy the Home Patch.cab (English Patch.cab to your SD Card (on the root (SDCARD:/Home Patch.cab)
- Install the 2 Drivers in the folder DRIVERS
(there is a change that you get a warning for installing the drivers, just continue)
- Turn of your phone and plug-in the USB cable
- Now turn on your phone while pressing also the green call button
(Power + Call)
- Now you're in the Bootloader Mode (when you get a message on your pc
for installing the drivers click on NO (so don't use Windows update) and let
it search for the drivers. It will find one of the drivers in the DRIVER folder
you just downloaded and install it again.
- Then go to the ROM map (C:/ROM) and run the PDAFLASH_ActiveSyncTotal(1016).exe
- Then it will automatically download the new WM 6.5 ROM to your C6625
- When it's finished it automatically reboots
- When the startup progress is ready you will see the TouchWiz interface and it's all Chinese
- Just don't click on anything and wait for 2-3 minutes (when it doesn't restart automatically
and you noticed that the D-Pad buttons aren't working just hold on the Power button
and it will automatically restart
- When starting up you see a Vodafone logo (this doesn't mean there's a
simlock, maybe we can change it later)
- When the startup progress is ready: press the left softkey 2 times (start)
- And then choose the File Explorer icon (you'll see after the startup its Resco Explorer 2007)
- Go to the Windows folder and press and hold the right D-Pad button to scroll faster
and search for fexplorer.exe and launch it
- Now hold the HOME button (the house button under the left softkey) so the
Task Manager opens and stop the Resco Explorer 2007
- Now in the Task Manager click on the normal File Explorer icon to open it
- Go to the SD Card and install the Home Patch.cab (English Patch.cab), when it's fully installed press the
left softkey to reboot
- After this you will notice everything is English! (You can change your location in:
Setting --> Regional Settings
- Register Resco Explorer 2007 yourself
--------------------------------------------------------------------------------------
New Keyboard Input
In the Text Field:
- Press the SYM button to change to ENG
- Press and hold the SPACE BAR to activate the symbols
- Press and hold S (*) for the T9 (it's menu number 4) or without
AutoText number 5)
- For Keyboard Symbols press and hold the letter
--------------------------------------------------------------------------------------
Known problems
- Some parts of the UI are still Chinese (Maybe you can edit the Register,
let us know)
- There may be some problem with the 3G Network but i think that's only in
China. I don't have any problems (I'm from the Netherlands, Provider:
Telfort).
- You have to manually put in the GPRS settings for the Provider Internet
--------------------------------------------------------------------------------------
For restoring to the latest original Firware:
Samsung C6625: Latest Official Firmware + Official Flashing Guide by Samsung
http://forum.xda-developers.com/showthread.php?t=689423
--------------------------------------------------------------------------------------
For this nice tweak:
Visit:
Increase Screen Size using 96DPI + Menu Tweak
http://forum.xda-developers.com/showthread.php?t=680233
--------------------------------------------------------------------------------------
All credits go to the C6625 Forum at www.zn520.com!
http://www.zn520.com/viewthread.php?tid=2545&extra=page=1&orderby=replies
--------------------------------------------------------------------------------------
Happy Flashing and Cooking,
Thekn
I cook New ROM WWE, but i don't have this device
Nokser said:
I cook New ROM WWE, but i don't have this device
Click to expand...
Click to collapse
You will cook a new ROM? Or have you already cooked a ROM?
Anyway, I appreciate your help a lot! There is no Samsung Valencia ROM
development so every step is a step closer!
I know, but I must have device for testing ROM
We must think of something
Nokser said:
I know, but I must have device for testing ROM
We must think of something
Click to expand...
Click to collapse
maybe this can help?
See the attachment for link!
----------------------------------
Samsung Windows Mobile SDK 1.2.1
The Samsung Windows Mobile SDK offers APIs to use advanced features unique to Samsung phones. You might already have experience using advanced capabilities featured in the Windows Mobile APIs, like GPS, Bluetooth, or multimedia support. In addition to the Microsoft Windows Mobile APIs, you can use Samsung APIs to access phone features such as the accelerometer, notification LEDs, and haptics feedback.
Version 1.2.1 of the SDK now includes two signed CAB installers in the redist directory, one for Samsung Windows Mobile Professional devices, and one for Samsung Windows Mobile Standard devices. Please see the Installation Guide for more details.
It also includes the new features of Version 1.2.0 of the SDK (new APIs for FM Radio and dual camera functionality and support for three new phones:
the GT-C6625 Valencia,
SCH-m490/m495 T*Omnia,
and GT-I8000 Omnia II.)
The MD5 check sum for Samsung Windows Mobile SDK 1.2.1 Installer.msi is ed7b50d8f085e5df9929131340df8401
I have a notion of what it is
I create apps from this SDK, for Samsung
See this my friend:
http://innovator.samsungmobile.com/platform.main.do?platformId=2
Anyway, I'm going to bed now!
I will see your reply in the morning!
Thanks for your help!
Nokser said:
I have a notion of what it is
I create apps from this SDK, for Samsung
See this my friend:
http://innovator.samsungmobile.com/platform.main.do?platformId=2
Click to expand...
Click to collapse
haha oke, i thought it could help!
I see it, your a ROM developer!
If you need any help, your welcome!
I can test anything on my device!
Have a nice sleep.
I do not sleep too much
Always at your service
Nokser
Thekn said:
haha oke, i thought it could help!
I see it, your a ROM developer!
If you need any help, your welcome!
I can test anything on my device!
Click to expand...
Click to collapse
I think on this, but tomorrow
Tomorrow I'll do a little test, so be ready
Nokser said:
Tomorrow I'll do a little test, so be ready
Click to expand...
Click to collapse
how are you doing today?
Have you done any tests?
I build this test now
How can you give me another link to the original ROM
Nokser said:
I build this test now
How can you give me another link to the original ROM
Click to expand...
Click to collapse
what do you mean by another link to the original ROM?
I have a link in the attachment to a forum with the latest firmware C6625XXIG5!
do not want netload
Nokser said:
do not want netload
Click to expand...
Click to collapse
Netload is the only site that doesn't require a login acount.
There is another site where you can download it but you have to sign up for an acount.
http://www.mobilfunk-faq.info/en/downloads/c6625/411/samsung-c6625-firmware-c6625xxig5-3320/
Maybe I can download it and upload it on a site you like?
Thekn said:
Netload is the only site that doesn't require a login acount.
There is another site where you can download it but you have to sign up for an acount.
http://www.mobilfunk-faq.info/en/downloads/c6625/411/samsung-c6625-firmware-c6625xxig5-3320/
Maybe I can download it and upload it on a site you like?
Click to expand...
Click to collapse
Give it to me at 4share in two parts
Thanks
On the official samsung website they say :
Update to Windows Mobile 6.5 via new PC Studio.
Did somebody try ?
business(dot)samsungmobile(dot)com
it doesn't work i believe...
guidouil said:
On the official samsung website they say :
Update to Windows Mobile 6.5 via new PC Studio.
Did somebody try ?
business(dot)samsungmobile(dot)com
Click to expand...
Click to collapse
any updates nokser
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello everybody!
Here is the latest official ROM for the Samsung C6625 aka Valencia (C6625XXIG5 of July 2009)!
http://netload.in/dateiydK42yjq0N.htm
I have also found a official Flashing Tutorial by Samsung Mobile!
Use it at your own risk! I'm not responsible for any consequences
when flashing, tweaking, or customizing your mobile
or using stuff without the permission of the official owner.
http://www.zshare.net/download/76551635ba1ffdf0/
Password: samsung-stuff.de
It contains information about:
GSM & WCDMA General Specifications
GSM TX power class
Product Fuction
Array course control
Software Downloading
Pre-requsite for Downloading
S/W Downloader Programs
Reference data
Safety Precautions
Each page contains this message:
SAMSUNG Proprietary_Contents may change without notice
This Document can not be used without Samsung's authorization
So be aware!
--------
Installation Guide:
- Download the C6625XXIG5.rar: http://netload.in/dateiydK42yjq0N.htm
- Extract the C6625XXIG5.rar
- There will be a folder named C6625XXIG5
- Rename it to ROM
- Move it to C:\ (so the path will be: C:\ROM)
- Download the Samsung C6625 CP_Diver.rar:
http://www.megaupload.com/?d=OVF9F5MH
http://netload.in/dateifSuc52X8Cf/Samsung C6625 CP_Driver.rar.html
- Extract the Samsung C6625 CP_Driver.rar and place it on your Desktop
- Shut down your device and plug-in the USB-Cable
- Now go to the C:\ROM folder and click on PDAFLASH_ActiveSyncTotal(1016)
- You will see this:
--------
File Path
C:\ROM\Click_all.Ist
Status
Device Disconnected!
Current Download File:
(This place will be empty)
--------
- Click on the icon with the device with the green screen and the red arrow
- Now press the power button and the upper volume button of your device
at the same time and hold them until a message appears on your screen
- Now the Flash program will start automatically
- When finished, is will restart automatically
- It will start up and load everything
- Let it configure for a couple of minutes so don't press anything!
- After the setup your device will restart and now you're ready to go!
--------
Good Luck,
Thekn
nice theme !!
trantiena10 said:
nice theme !!
Click to expand...
Click to collapse
Yeah it's the promoting advertisement for the C6625. The funny thing is, the theme is from the C6620 and doesn't exist for the C6625
Cook the ROM ...
1. Extract the C6625XXIG5.rar, There will be a folder named C6625XXIG5, get a file NAND.BIN
2. dump files:
osnbtool -sp NAND.bin
osnbtool -sp nand.bin.BIN.NB0
rename nand.bin.bin.nb0.OS.NB os.nb
osnbtool -d os.nb 1 xip.bin
osnbtool -d os.nb 2 imgfs.bin
imgfstodump imgfs.bin -> get a folder named dump
-(the rest work is kitchen ...)
3. now do a test, build a new NAND.bin
- delete some "useless" files in the dump folder
ImgfsFromDump imgfs.bin imgfs.new
osnbtool -c os.nb 2 imgfs.new
osnbtool -extra os.nb.NEW
- open the file os.nb.NEW.EXA with WINHEX, Define a block from 161600 to 3231ff, and delete the block, save and exit
osnbtool -2bin os.nb.NEW.EXA 0x002E2E00
move /y os.nb.NEW.EXA.bin NAND.bin
......
py8 said:
Cook the ROM ...
1. Extract the C6625XXIG5.rar, There will be a folder named C6625XXIG5, get a file NAND.BIN
2. dump files:
osnbtool -sp NAND.bin
osnbtool -sp nand.bin.BIN.NB0
rename nand.bin.bin.nb0.OS.NB os.nb
osnbtool -d os.nb 1 xip.bin
osnbtool -d os.nb 2 imgfs.bin
imgfstodump imgfs.bin -> get a folder named dump
-(the rest work is kitchen ...)
3. now do a test, build a new NAND.bin
- delete some "useless" files in the dump folder
ImgfsFromDump imgfs.bin imgfs.new
osnbtool -c os.nb 2 imgfs.new
osnbtool -extra os.nb.NEW
- open the file os.nb.NEW.EXA with WINHEX, Define a block from 161600 to 3231ff, and delete the block, save and exit
osnbtool -2bin os.nb.NEW.EXA 0x002E2E00
move /y os.nb.NEW.EXA.bin NAND.bin
......
Click to expand...
Click to collapse
Thanks brother! I've been waiting for this! This is great!
Ps. Which kitchen is the best I can use?
Time to cook again.. thanks py8..
move on Thekn..
TheKn
Mind to re-up the "Samsung C6625 CP_Diver.rar" like netload or rapidshare, cause megaupload did not work in HK, A Big TKS in advance.
Cheers/Blackfire920
blackfire920 said:
TheKn
Mind to re-up the "Samsung C6625 CP_Diver.rar" like netload or rapidshare, cause megaupload did not work in HK, A Big TKS in advance.
Cheers/Blackfire920
Click to expand...
Click to collapse
added another mirror!
TheKn
U're a STAR.TKS
Cheers/Blackfire920
TheKn
Is there any mms app for c6625 other than the one from samsung, currently picture mms are ok (in/out) but all email mms was not working, I switch the sim card to a old motorola v3xx and it was fine...funny things is that when there's a inbound email mms, the "+" hsdpa sign was on and those email mms just can't land...may be the phone company change some setting... so switching mms app may be a solution...?
TKS in advance
Cheers/Blackfire920
blackfire920 said:
TheKn
U're a STAR.TKS
Cheers/Blackfire920
Click to expand...
Click to collapse
You're welcome!
blackfire920 said:
TheKn
Is there any mms app for c6625 other than the one from samsung, currently picture mms are ok (in/out) but all email mms was not working, I switch the sim card to a old motorola v3xx and it was fine...funny things is that when there's a inbound email mms, the "+" hsdpa sign was on and those email mms just can't land...may be the phone company change some setting... so switching mms app may be a solution...?
TKS in advance
Cheers/Blackfire920
Click to expand...
Click to collapse
Arcsoft MMS:
http://www.1800pocketpc.com/2008/05/27/arcsoft-mms-50317.html
Thekn said:
Hello everybody!
Here is the latest official ROM for the Samsung C6625 aka Valencia (C6625XXIG5 of July 2009)!
http://netload.in/dateiydK42yjq0N.htm
I have also found a official Flashing Tutorial by Samsung Mobile!
Use it at your own risk! I'm not responsible for any consequences
when flashing, tweaking, or customizing your mobile
or using stuff without the permission of the official owner.
http://www.zshare.net/download/76551635ba1ffdf0/
Password: samsung-stuff.de
It contains information about:
GSM & WCDMA General Specifications
GSM TX power class
Product Fuction
Array course control
Software Downloading
Pre-requsite for Downloading
S/W Downloader Programs
Reference data
Safety Precautions
Each page contains this message:
SAMSUNG Proprietary_Contents may change without notice
This Document can not be used without Samsung's authorization
So be aware!
--------
Installation Guide:
- Download the C6625XXIG5.rar: http://netload.in/dateiydK42yjq0N.htm
- Extract the C6625XXIG5.rar
- There will be a folder named C6625XXIG5
- Rename it to ROM
- Move it to C:\ (so the path will be: C:\ROM)
- Download the Samsung C6625 CP_Diver.rar:
http://www.megaupload.com/?d=OVF9F5MH
http://netload.in/dateifSuc52X8Cf/Samsung C6625 CP_Driver.rar.html
- Extract the Samsung C6625 CP_Driver.rar and place it on your Desktop
- Shut down your device and plug-in the USB-Cable
- Now go to the C:\ROM folder and click on PDAFLASH_ActiveSyncTotal(1016)
- You will see this:
--------
File Path
C:\ROM\Click_all.Ist
Status
Device Disconnected!
Current Download File:
(This place will be empty)
--------
- Click on the icon with the device with the green screen and the red arrow
- Now press the power button and the upper volume button of your device
at the same time and hold them until a message appears on your screen
- Now the Flash program will start automatically
- When finished, is will restart automatically
- It will start up and load everything
- Let it configure for a couple of minutes so don't press anything!
- After the setup your device will restart and now you're ready to go!
--------
Good Luck,
Thekn
Click to expand...
Click to collapse
is there a similar guide fro the samsung sph-i325 aka samsung ace?
I posted a request here: http://forum.xda-developers.com/showthread.php?t=708471 but no responses yet
firmware mirror
Can you post firmware mirror????
i have problem with netload in my country. (Too slow....)
Thanks.
I reinstalled the WM, but the phone is still locked in the network. Please help me unlock it? plssss
Cipylan said:
I reinstalled the WM, but the phone is still locked in the network. Please help me unlock it? plssss
Click to expand...
Click to collapse
because it doesn't provide a sim unlock! try to search for a sim unlock!
what version of WM is this? still 6.1? standard?
ajoesmith said:
what version of WM is this? still 6.1? standard?
Click to expand...
Click to collapse
yeah it's the latest official samsung c6625 rom (wm 6.1)
Need help flashing c6625
I can't even flash my device to C6625XXIG5
when i try i can't get an usb connetction.
It says phone usb cable is not conneted,
or key is not pressed.
What am i doing wrong.
Sorry, i was too fast, i found somthing
about other drivers.
I've installed then end it worked.
Now i wil try remora V2.
Getting the same as before,
don't know what i'm doing wrong.