Vox Rose Kitchen 2.0 [WM 6.0 + 6.1 + 6.5]
I present to you my new Vox Rose Kitchen v2.0.
It now supports the Vox and the Rose.
The downloads here will be Vox specific only. All the ROM, SYS and OEM folders will only work with the Vox.
For the Rose version go here!
For all things you can do with the kitchen, please look at the thumbnail!
Requirements:
dotNET Framework (at least 2.0)
Microsoft Visual C++ 2008 Redistributable
Windows XP or higher is recommended (SplashMaker doesn't work under 64-bit operating systems)
Kitchen has to be located like this: %systemdrive%\Vox Kitchen\... -- So in the "Vox Kitchen"-folder should be the exe and all the folders (OEM,SYS,ROM,TOOLS)!
Downloads:
The download comes in two parts!
First is the TOOLS folder and the "Vox Rose Kitchen 2.0.exe".
The second part are the ROM, SYS and OEM folders.
General Downloads (always needed):
Download exe, bat and TOOLS folder
just click on install and it will unpack it to your system drive\Vox Rose Kitchen
Downloads for WM 6.0:
Download ROM + OEM + SYS for WM 6.0
Downloads for WM 6.1 (should be20282.1.3.6):
Download ROM + OEM + SYS for WM6.1 (Rose folders)
Neo-Package (replace the SYS packages)
WM 6.1 Languages
Downloads for WM 6.5:
Download ROM + OEM + SYS (21854.5.0.80 "Official" files)
Download ROM + OEM + SYS (23017.5.3.0)
Changelog:
v1.2 -> v2.0
updated the whole kitchen to be compatible with the Rose (S740)
made extracting a lot easier (therefore I removed the wizards), also gives you the XIP of the ROM
automatically implants xip when you place a xip.bin in the ROM folder (therefore I removed the XIP wizard, but it's still in the tools folder)
updated the build wizard accordingly
some new graphics
If you want to use the batch version, you'll have to use the old v1.2 where it's still included, but without the benefits of automatic xip implantation -> download 1.2
And of course Thanks to Dr. G!!!
The Building Process
Fire up "Vox Rose Kitchen.exe" in the normal kitchen folder ("C:\Vox Rose Kitchen") and go to the build tab. It'll look like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The first step is to start G'Reloc and check if the values are right for the Vox (look at the picture) and click on "Do it"!
If you are cooking with WM 6.5 you might get errors, because G'Reloc isn't ready for Wm 6.5. In this case you click OK and then "Do it!" again and it'll tell you which module is producing the error. You can now either go to that folder and use Unlocker to unlock the "tmp"-file and delete it and then click "Do it!" again to keep going or you use recmod to make a file out of the module (better if you are cooking more then once). I recommend the recmod path it's easier and faster once you've eliminated all "bad" modules!
The WM 6.5 package I supply has all modules already fixed, so you don't need to worry!
When G'Rleoc is done (it might look like it hangs and then unexpectedly is done), you can close it and continue on with BuildOS. Here you can choose what to include and what not to include (only OEM packages, if you don't want certain languages (all the xxx_LANG_0XXX folders) or SYS packages you'll have to delete them manually! Please do not remove the package I have marked in the picture, unless you are re-integrating customer service (but why would you ).
Click on the green play button once you have selected everything you want! It'll say done at the bottom once it's done!
When it's done you can close it and click on "Create Vox ROM".
This will automatically insert a xip into the new ROM if there is one present in the ROM folder (xip.bin). You don't need a new XIP for 6.1 and I integrated the right one in my WM 6.5 package. So basically you don't have to worry about XIPs.
The cmd window will do everything on it's own and it's done when the window closes itself. You now have a OS.nb in the temp folder.
Now open then "Start HTC ROM Tool" and click on "Build!":
Under "Device" choose Excalibur.
Change the "Version" to what ever you want and leave the rest alone.
Then select a OS and choose the OS.nb in the temp folder.
Then click on "Build" and save the ROM in TOOLS\VoxFLASH and you are done with cooking!
Welcome back!
May you indicate the SYS-XIP included for every WM?
Thank you very much, frauhottelmann! Very long waited kitchen under WM6.5. Great work!
I added the build numbers, but I don't remember WM 6.0 build...
I have been waiting for WM6.5 kitchen for a long time. Great minds will come to work again.
cooking 6.5 will be fun.
Thanks!!
Thank FMs..did you have a good time in scotland?
I just ahd a quick look at this and...I got no chance lol
Thanks fh, was waiting for it, hope you had fun on your vacation
Hello, guys...
I´m completely new to Vox world, I´m coming from Excalibur, and I want to know if I´ll be able to backup my current rom with this tool. Also, I want to know if it´ll be possible to restore this backup if something goes wrong with a WM6.5 upgrade, for example.
I´m currently using WM6.0 Stock ROM. My vox never saw another rom in it´s life.
Also, is there a step-by-step guide to do this backup/restore procedure? I found some articles (using the search tool), but they seem to be incomplete or outdated. I´m really afraid of bricking my expensive device.
Thanks in advance.
Regards.
I uploaded the folders from my "Official" WM 6.5 ROM.
Updated to version 2.0 check first and second post for details!
Spoiler: automatic xip integration and new tutorial on cooking!
hi frauhottelmann
can i build a wm6.1 vox spanish rom with all the files available in the 1st post?
Also, where could I get a spanish language for building the rom?
thanks,
WM6.5 Offical V1 built and my phone hangs in bootloader splash for infinite time (I tried waiting for more than half an hour then gave up installing original HTC WM6 update)
I tried disabling the options for third party software (first 4 in the list) but still it hangs in startup screen.
From official word it seemed to me that it has stock WM6.5 icons form microsoft but later seeing "Clean" rom screenshots i became sure that the "official" will much look the same.
Regards
Moeen
kabeza said:
hi frauhottelmann
can i build a wm6.1 vox spanish rom with all the files available in the 1st post?
Also, where could I get a spanish language for building the rom?
thanks,
Click to expand...
Click to collapse
No, there are no Spanish files, I don't have them all.
dark_prince said:
WM6.5 Offical V1 built and my phone hangs in bootloader splash for infinite time (I tried waiting for more than half an hour then gave up installing original HTC WM6 update)
I tried disabling the options for third party software (first 4 in the list) but still it hangs in startup screen.
From official word it seemed to me that it has stock WM6.5 icons form microsoft but later seeing "Clean" rom screenshots i became sure that the "official" will much look the same.
Regards
Moeen
Click to expand...
Click to collapse
Don't know, what you're doing wrong, but I didn't change anything from my ROM to the kitchen, so it should boot (and nobody complained yet).
Otherwise please try v1.2 (download) and build the ROM with that version. I haven't tried v2.0 with the Vox, but it should work.
What do you want to tell about the icons?
frauhottelmann said:
No, there are no Spanish files, I don't have them all.
Click to expand...
Click to collapse
Any way to get plain files for translating into spanish? or most are built without source
frauhottelmann said:
No, there are no Spanish files, I don't have them all.
Don't know, what you're doing wrong, but I didn't change anything from my ROM to the kitchen, so it should boot (and nobody complained yet).
Otherwise please try v1.2 (download) and build the ROM with that version. I haven't tried v2.0 with the Vox, but it should work.
What do you want to tell about the icons?
Click to expand...
Click to collapse
I just installed clean v3.0 of WM6.5 and it has the original icons so my problem is solved in that regard.
Any way to get plain files for translating into spanish? or most are built without source
Click to expand...
Click to collapse
I have French, Czech, Italian, Greek and Polski/Polish localisations but unfortunately i dont have spanish localisation for Windows Mobile standard
Any fix to change sliding panel to default HTC one rather using Titanium (its slower than HTC's Sliding panel)
Could you please upload the WM 6.0 ROMs and OEM + SYS, but now using a *.zip or *.rar format, because the installer that you're using is crashing on my Windows Vista.
nathanpc said:
Could you please upload the WM 6.0 ROMs and OEM + SYS, but now using a *.zip or *.rar format, because the installer that you're using is crashing on my Windows Vista.
Click to expand...
Click to collapse
You can unpack the exe files with 7zip instead of the installer.
When I tried what I got was this:
Code:
Can not open file 'C:\Program Files\Vox Kitchen\oem_sys.exe' as archive
And the same for the rom.exe
That sounds like a corrupted archive then. Try re-downloading. I couldn't upload right now anyway!
Related
Universal WM6 ROM Kitchen
Finally I'm able to steal some time to upload this Kitchen, the intention is to get everybody involved and understand and maybe help with the development of wm6 for universal, and also everyone can built their own personalize universal WM6 ROM, hopefuly user or any rom modder sending some patch or registry modification or some part update to the kitchen...
Big Thanks to MAMAICH and also my friend Bepe, the two Genius on the forum I know...
Most of this Guide is taken from bepe's, and also some of the dev tool are taken from Bepe's, and ofcourse MAMAICH so credits goes to them also for his great method and tools!
lets start,
helmi
----------
ROM Kitchen is a tool to cook your personal Universal Windows Mobile 6 ROM by the packages you need.
Your Computer must have .NET Framework v2.0 installed!
THE KITCHEN:
Someone might need to mirror it somewhere?
ftp://xda:[email protected]/Uploads/Universal/helmi_c/helmi_uni_wm6_kitchen_r0.rar
OEM Pack Included in R0 Kitchen (Most of it part are newer then currently available rom):
Camera&MMS=3.5.1.5
CommManager=1.3.7.0
mHub=6.29.061106.I0
PicturesExt.dll=1.20.911.610
PowerService.dll=2.15.1.0
WirelessMgr_Service.dll=2.21.0.0
NETCF2_SP2= .NET Compact Framework 2 SP2
JAVA
SIM_Mgr=5.30
STK_Service.dll=4.47
StreamingMedia=2_10_1025621
Zip=1_20_25226_1
ps: the kithen is ready to build vanilla version, just
1. Click createos.exe
2. Click start button (createos.exe dialog) wait till its finish.
3. Click CreateROM.BAT, click encode, browse nk.prj, set operator
4. flash....Done.
OEM PACK:
I'm just too lazy to link them one by one...
BTFtp=1_1_27419_1
BTSapProfile.v1.45
CambridgeMSBTPlug-In
HtcWmpPlugin
Indialler_Phonepad_15_Language
MS.VoiceCommand=1.6_UNIVERSAL
OneNoteMobile=12.0.4518.1010
Pocket_MSN
PocketXPDF=0.50
Resco_Explorer 5.42
SDDaemon_UNIVERSAL
StowawayBTMouseKeyboard
SymbolPad=1_0_24075_1
Szilamer_BubbleFix
Szilamer_WordSuggestionFix
TaskManager=1_0_27407
USB_HDD
VGAMode
VOIP
WinliveVGA
WM5torage 1.7.3
WM6_CustomerFeedBack
NETCF2_SP2
JAVA
Zip=1_20_25226_1.rar
more will be added by others maybe? TOMTOM? SPB PLUS?, wiki page might be ideal for this...
How-To build a ROM:
1. Extract the kitchen pack to the c:\DEV folder (create the folder if u dont hv it)
2. Extract OEM Packages you need to OEM folder
3. Run CreateOS.exe and click the button
4. Run CreateROM.bat, proccesing....
5. HTC64_Extended_ROM_Tool.exe will start, click encode, then browse for C:\Dev\Helmi_UNI_WM6_Kitchen_R0\Temp\nk.prj then click next.
6. Set ur operator in operator name text field, default is set for 02 (02__01) u might change this to TMOB, MDL, etc then click encode when u finish to convert nk.nba to nk.nbf, the nk.nbf (ROM) will locate at C:\Dev\Helmi_UNI_WM6_Kitchen_R0\Temp folder.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
7. ROMUpgradeUt.exe will start to update the rom to ur device or u might cancel if u planning to update latter.
Done! U Just create ur personal Universal WM6 ROM!
How-To build ur own OEM Package:
An OEM Package is just a simple folder containing files and registry settings for the ROM
First of all you'll need a GUID number for your Package.
Go to http://www.famkruithof.net/uuid/uuidgen to get one.
In my case:
283b9db7-cb03-4c1b-820e-ca49b2c3b5db
Necessary steps:
1. Create a new folder:
Dev/OEM/[Your package name]/
2. Create a empty text file:
Dev/OEM/[Your package name]/283b9db7-cb03-4c1b-820e-ca49b2c3b5db.dsm
(CreateOS.exe will finish this file for you)
If needed:
3. Create an UNICODE text file:
Dev/OEM/[Your package name]/283b9db7-cb03-4c1b-820e-ca49b2c3b5db.rgu
This file could be used to add registry entries to the ROM
First line is:
REGEDIT4
...
and there MUST be a empty line at the end!!
4. Create an UNICODE text file:
Dev/OEM/[Your package name]/initflashfiles.txt
This file could be used to create folders or copy files, shortcut on the ROM.
For Example/ Ilustration: Open or read Dev/LOC/initflashfiles.dat using a text editor or any premake initflashfiles.txt at one of the OEM folder.
and there MUST be a empty line at the end of iniflashfiles.txt also!!
Copy all files you need to Dev/OEM/[Your package name]/
How to change Universal paging pool SIZE:
Open nk.nba with hex editor and search for hex 64B00000640000002E2E2E2E00002E00 with 2E as a joker string and the last 2E00 is ur paging pool size. or just goto offset 51A502 and start mod ur paging pool see ilustration bellow:
the picture show us 4.8mb(48) paging pool (standart) change to 60 (6mb), 70(7mb), or any size u like.
How to fake ur CE version and OS Built
(only if u kinda person who like to fake stuff, not recommended thought)
How to fake ur CE version:
open nk.nba/nk.fat with any hex editor and go search unicode string 2.00.02 (the real version) or goto address 477C and 31437C and modify to any version u like, 2.99.99 or 2.00.99 or 2.01.06 or 2.01.08 or maybe 9.99.99? if u like... but still, its a fake, well its up to you...
Ilustration picture:
How to fake ur OS Build:
convert shellres.dll.0409.mui module (dir) to file and edit string 918 at resource ID 14683 and 14684 to any OS version u like, u'll have OS build 10.10 (Build 99999) OS if u like...but still, its a fake, well its up to you...
Ilustration picture (u'll hv OS 10.50.9999 (Build 99999) isn't amazing? more update then ms one...:
How to cook ur Extended_ROM
I'll update someday, running out of time...
Well, the kitchen and also some instruction (hopes u guys understand) are here now, so? why dont you guys built ur own personalize WM6 ROM...??
I hope more people will understand and gettin more involved and helpful with rom making stuff after this, and more people will support each others with bugs and updates... lets work togather guys... next would be AKU3.3 and AKU3.5 kitchen if I hv time...
hopes that i'm not forgot about something...lol...
regard,
Helmi
EDIT:
Added wiki page by my old buddy GerardNL, Thanks GerardNL, my friend...
Kitchen WIKI:
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal_WM6_Kitchen_Helmi
the link doesnot work.
what a great guide, but can't download the kitchen..
ftp://xda:[email protected]/Uploads/Universal/helmi_c/helmi_uni_wm6_kitchen_r0.rar
Link above is working, file download ok for me. File not corrupt.
Helmi
What a great gift ! It makes a little bit easier to understand how to make something face our particular needs. a way to make everyone happy with the parameters and applications he likes. by default.
Thank you !
WoOoOoW. CoOoOoL.
Will download, learn and try.
You have disappear for too long. Beside this kitchen, any new ROMs with Video Call Working?
Very Very thanks from Italy.
helmi_c said:
Most of this Guide is taken from bepe's, and also some of the dev tool are taken from Bepe's, and ofcourse MAMAICH so credits goes to them also for his great method and tools!
http://buzzdev.net/index.php?option=com_simpleboard&Itemid=59&func=view&id=23392&catid=64
Click to expand...
Click to collapse
One matter.
This link doesn't work.
One Question.
One Wizard to translate the roms is it possible?
2nd problem.
I try this:
ps: the kithen is ready to build vanilla version, just
1. Click createos.exe
2. Click start button (createos.exe dialog) wait till its finish.
3. Click CreateROM.BAT, click encode, browse nk.prj, set operator
4. flash....Done.
Click to expand...
Click to collapse
At 3th point after I Browse nk.prj I click Encode and I've this error:
Hi Helmi_C
The link is working for me.
Thank you for the kitchen, great work!
Greetings, Leo
Broken FAQ link
http://buzzdev.net/index.php?option=com_simpleboard&Itemid=59&func=view&id=23392&catid=64
Is the page you Link to Helmi.. I cant call it up either!
cicciocant said:
2nd problem.
I try this:
At 3th point after I Browse nk.prj I click Encode and I've this error:
Click to expand...
Click to collapse
I get the same error code as well!
thx .............
Great Job , Thanks
cicciocant said:
2nd problem.
I try this:
At 3th point after I Browse nk.prj I click Encode and I've this error:
Click to expand...
Click to collapse
Juggles said:
I get the same error code as well!
Click to expand...
Click to collapse
did u guys extract the kitchen to c:\dev ? so the end result should be C:\Dev\Helmi_UNI_WM6_Kitchen_R0, the error is because the nk.nba cant be found... the nk.nba should locate here C:\Dev\Helmi_UNI_WM6_Kitchen_R0\Temp\Nk.nba
cicciocant said:
Very Very thanks from Italy.
One matter.
This link doesn't work.
One Question.
One Wizard to translate the roms is it possible?
Click to expand...
Click to collapse
yes, the link to buzz is dead, I'll erase it...
if you hv another LOC (Localization MUI) it should possible, btw darkforce hv post a rom with many language? u can take its MUI and HTM help file with another language. just replace the loc folder with foreign LOC.
helmi_c said:
yes, the link to buzz is dead, I'll erase it...
if you hv another LOC (Localization MUI) it should possible, btw darkforce hv post a rom with many language? u can take its MUI and HTM help file with another language. just replace the loc folder with foreign LOC.
Click to expand...
Click to collapse
the mui and htm only can replace by OEM folder , in LOC not enough for that,special for IMU very difficult to replace,also need to edit reg key
helmi_c said:
yes, the link to buzz is dead, I'll erase it...
if you hv another LOC (Localization MUI) it should possible, btw darkforce hv post a rom with many language? u can take its MUI and HTM help file with another language. just replace the loc folder with foreign LOC.
Click to expand...
Click to collapse
Thx. I Solved.
TO translate Can I Take the .mui file from Wm5 Aku 3.5 Italian ROM by fly?
It's very difficult?
Ufone Operator ID
Hello Helmi thanks for the Kitchen and love you for the 1.1 Rom.
Can you tell me how to set Operator ID for Ufone in pakistan because I have never been able to successfully change the code that I get "41003" in the phone app even after editing the nbf in WM5 Himalaya Roms as well.
Do I write Ufone_41003 in the Operator Id line or what?
Here is what I get from running CreateOS.exe with extra included (see attached).
Running CreateROM.bat prompts for missing default.hv, boot.rgu which I copy from somewhere in the kitchen. But prompts for Boot.hv which is no where to be found. (Can find in my PPC).
What did I do wrong?
But still able to continue to get nk.nbf. Can flash this? Is this same as Helmi-WM6-v1.1?
i don't know how you guys do it, but thanks very much all of you!!!!
Wow......Great job!
I had been waiting for it for a long time.
http://forum.xda-developers.com/showthread.php?p=1159759#post1159759
Thanks......
hi,
As promissed, this is my special Kitchen for Wizard users and chefs. This kitchen is based on Bepe kitchens with some edits on nb file and batches to work well with our Wizard devices.
With this kitchen and guide, all beginners can going very fast to be an expert, so this is suitable for all (experts and beginners).
===============================================
Change Log:
5-Aug Update: 5.2.20273 build 5.2.20273.1.3.3 SYS and XIP (check 2nd post).
13-May Update: 5.2.19213 build 5.2.19213.1.0.4 SYS and XIP (check 2nd post).
29-Apr Update2: 19202 buid added in downloads post as SYS and xip.bin.
29-Apr Update1: another CreateROM.bat to cancel combining all packages to one.
28-Apr Update: date of creating this thread.
===============================================
Kitchen Advantages:
- Real porting for xip in auto mode (no need for write addresses or whatever)
- Auto Relocating for modules (no need to edit .VM folder in SYS)
- All dsm will be combined in one dsm (so, windows folder has only one dsm, no overloading, and this will save more than 1 MB from the Kitchen)
- All RGU will be auto encrypted.
- The kitchen will give you a notice that your packages are overload (no need to flash to test).
===============================================
Requirements:
- you have to download: Microsoft Visual C++ 2008 Redistributable Package.
- Wizard Device.
- SYS folder from the build you want to use.
- OEM folder which contains Drivers and your packages.
- XIP modules from the build you want to port.
- Give some credits if you plan to share your releases.
===============================================
How to start cooking:
1- Extract TNT_Kitchen_for_Wizard to C: dirctory on your PC.
2- Copy SYS folder you want to use to the Kitchen.
3- Add your OEM packages to OEM folder.
4- Run BuildNB.bat.
5- wait until BuildNB.bat shows "press any key to continue".
6- go to nbf folder.
7- run nb2nbf.exe.
8- in Language, choose WWE.
9- tick File #1 and then choose your 80040000-OS.nb file.
10- go to Image Name and choose OS.
11- on the right top corner, choose Translate.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
12- open nbf folder and run Vista_ROMUpdateUtility.exe if you have vista operating system, or XP_ROMUpdateUtility.exe if you have XP operating system.
===============================================
Some Hints:
- How to know that your packages is larger than what you have to load??
- if you see this msg, so you have to remove some packages:
- How to minmize SYS folder Size??
- there are many of useless packages located on SYS folder, try to see what you don't need and remove.
===============================================
How to port XIP from any new build:
- extract xip.bin from the build you want to port from.
- Download Bepe xip port
- extract xipport to any folder
- the folder should contain XIPPort.exe, pkgcommon.dll, and xip.bin you want to prot. (i will put xip.bin from different new builds)
- run XIPProt.exe
- press Dump xip.bin
- you will have OUT Folder
- press Make Pkgs
- now, open OUT folder, you will have Files and Modules.
- for each folder (Files and Modules) copy MSXIPKernel and MSXIPKernelLTK contents (Note: without .txt files) and paste them to /ROM/XIP folder and replace.
- now, if you cook, you will have the new build with real port.
===============================================
How to port SYS from any new build:
Just extract SYS folder from the new rom you want to use its SYS folder, and paste the new SYS to the kitchen (you have to see the suitable extracting kitchen from the device you want to get SYS folder from it, and also i will upload SYS folder from any new build to direct use)
===============================================
Which OEM Drivers and Apps can you use:
you can search for this yourself, and there are many of them, you can use boy_de_ghet from Here, or use double_ofour OEM which can be found here, also Faria thread contains good OEM (but maybe old). on these packages, you can use Drivers and apps with no problems for Wizard ( OEM_Lang_0409, OEMAPPS, OEMDrivers, OEMMISC, OEMOPERATORS, WinCENLS_WWE...)
from other devices, you can use OEM packages from mattk_r packages (without using the drivers located on that OEM Folder, because they are for Hermes only) the thread can be found here, also maybe they are a little bit old, but you should find something intersted. (you cannot use
OEM_Lang_0409, OEMAPPS, OEMDrivers, OEMMISC, OEMOPERATORS, WinCENLS_WWE.. which are for Hermes Device, just get the other packages)
===============================================
Some Packages should be located in OEM to make your rom bootable:
your OEM should contains: OEM_Lang_0409, OEMAPPS, OEMDrivers, OEMMISC, OEMOPERATORS, WinCENLS_WWE (maybe this will be in SYS) and SecurityOff. also, maybe LangDB and Default packages.
All mentioned above are suggestions (maybe experts know about that more than beginners)
===============================================
How to make new packages for your own:
you can learn that yourself by searching and learning, it is very simple but needs nice relax from you, i suggest to read Faria thread to learn how to create your own packages. another very useful thread by double_ofour can be found here
Downloads:
========================
TNT_Kitchen_for_Wizard: contains the base kitchen without SYS and OEM. the orioginal XIP in this kitchen is 5.2.19209
Rapidshare
========================
5.2.19209 SYS Folder: contains SYS folder extracted from Kaiser, just copy SYS to the kitchen
Rapidshare
=======================
29/Apr update1
CreateRom without combining all packages to one: all you need to do is to download this file and put CreateROM.bat in TOOLS folder and replace.
=======================
29/Apr update2
XIP.bin from 19202 build: as mentioned before, use xipport.exe to extract this xip and read guide to know where to extract and what to extract
Download
SYS from 19202 build: just copy SYS to the kitchen
Rapidshare
=======================
13/May update
XIP.bin from 19213 build: as mentioned before, use xipport.exe to extract this xip and read guide to know where to extract and what to extract
Download
XIP Folder from 19213 build: this is the whole folder of XIP which should be located in Rom folder, so just remove the older one and paste this one.
Download
SYS from 19213 build: just copy SYS to the kitchen
Rapidshare
=======================
5/Aug update
XIP Folder from 20273 build: this is the whole folder of XIP which should be located in Rom folder, so just remove the older one and paste this one.
RapidShare
SYS from 20273 build: just copy SYS to the kitchen
RapidShare
Notes:
- you have to unlock your device before flashing, for more details in flashing notes visit this thread.
- i'm not responsible for any damage on your device.
========================================
Important Links:
- How to determine if your Wizard is a G3 or a G4
- CID Unlock your G3 Wizard (Only for Wizards with less than AKU2)
- Easy guide to CID unlock G3 Wizard
- Solution for CID Unlocking G3 Wizard with AKU2 or higher
- CID Unlock your G4 Wizard Hard-SPL
- CID Unlock your G4 Wizard Soft-SPL
- Unlocking and Upgrading G3 Wizards
- Howto flash a Wizard... a little tutorial!
- How to SIM unlock the Wizard
- HOW To Change the Pagepool (WM5)
- HOW To Change the Pagepool (WM6)
- XDA-Wiki for Wizard which contains huge informations needed.
Credits:
- ofcourse first one is Bepe for his great tools
- tom_condon for helping me on so many things in cooking
- misar for his tools in relocating modules
- all the nick names i used in this thread (faria, double_ofour, boy_de_ghet, mattk_r, and vippie)
- for jwzg for the good arrangement in our forums.
================================
i hope you get some useful tools and informations to learn and improve your cooking.
Good Luck and have a nice cooking .
================================
if you don't have the time for cooking, you can download any rom, feel free to see my sign. and click on the latest wizard rom mentioned there.
Perhaps I should build my own. This should be interesting.
Thanks man, you always do a great job.
Please creat kitchen buit 19701 new !!!!
OS 5.2.19701
Vesion clean !
Done.
i will update the thread with the suitable informations and links to keep our working better.
if you think that there are some of useful threads just let me know to edit my posts .
good luck guys .
amsatnetg said:
Perhaps I should build my own. This should be interesting.
Thanks man, you always do a great job.
Click to expand...
Click to collapse
ofcourse you have to build your own (if you have the time)
c28langthang2010 said:
Please creat kitchen buit 19701 new !!!!
OS 5.2.19701
Vesion clean !
Click to expand...
Click to collapse
where is this??
point me and let me do it for you .
well done it's right, i am going to see if i can cook using your kitchen. I was completely clueless when it came to porting a "real" rom from one device from another so i can now see the light. This definately deserves to be a sticky!! thanks again
newbie1221 said:
well done it's right, i am going to see if i can cook using your kitchen. I was completely clueless when it came to porting a "real" rom from one device from another so i can now see the light. This definately deserves to be a sticky!! thanks again
Click to expand...
Click to collapse
you will use it with no problem at all, and i'm sure you will increase your packages size (in case of dealing with 19209 SYS by removing the useless packages from it).
Good luck bro .
Nice Kitchen! I ported 19701 and it works greats! But now the SYS folder... The 19701 from PDAVIET is protected. Can someone provide it or knows how to extract it?
j.vd.spank said:
Nice Kitchen! I ported 19701 and it works greats! But now the SYS folder... The 19701 from PDAVIET is protected. Can someone provide it or knows how to extract it?
Click to expand...
Click to collapse
is it difficult?
about the protuction, no one can open it.
any rom will be cooked using the kitchen here can't be extracted, PDAVIET used the same tools included on this kitchen
its right said:
is it difficult?
about the protuction, no one can open it.
any rom will be cooked using the kitchen here can't be extracted, PDAVIET used the same tools included on this kitchen
Click to expand...
Click to collapse
Not difficult... I can share if someone is interested, but without SYS folder its 'useless'. So we have to wait when someone releases a kitchen
j.vd.spank said:
Not difficult... I can share if someone is interested, but without SYS folder its 'useless'. So we have to wait when someone releases a kitchen
Click to expand...
Click to collapse
i don't prefer the builds that not provided by microsoft, many of builds are hacked like 19400 and yours, so i don't think you will find SYS folder simply.
Very well done wise man!
I'm going to start on my own and report the results later
Thanks a lot for sharing
epimazzo said:
Very well done wise man!
I'm going to start on my own and report the results later
Thanks a lot for sharing
Click to expand...
Click to collapse
you are welcome, have a nice cook man .
its right said:
Downloads:
========================
TNT_Kitchen_for_Wizard: contains the base kitchen without SYS and OEM. the orioginal XIP in this kitchen is 5.2.19209
Rapidshare
========================
5.2.19209 SYS Folder: contains SYS folder extracted from Kaiser, just copy SYS to the kitchen
Rapidshare
=======================
Click to expand...
Click to collapse
The two links are to the same file.....
Andy
nice job =D
i'll try it myself
ADB100 said:
The two links are to the same file.....
Andy
Click to expand...
Click to collapse
no they are different
but after editing , thanks for that.
Itsright,
Got little confused...
During cooking process, only DUMP is created together with log.txt. That's all found inside temp folder. Shouldn't expect boot.rgu and nb file? I added my own stuff like OEM and SYS parts. no issues here.
XIP is also already in but didn't got your point related to OS.NB.PAyload.
What actually does it mean?
Maybe I should review something left behind...
I appreciate other comments too...
Rgs
SuperJustKitchen v0.7 Released.
Go to my site: http://justkitchen.info to get the updates and the info. It takes to long to update every device's forum that is supported, and I plan to support all devices.
Word of warning:
None of the new EXT's have been tested and fixed for the Herald, Opal, Hermes AND Artemis. Please test test and test and then let me know which packages don't work and what YOU've done to fix them. (I don't have time to fix ALL of them by myself.)
(I'm no longer updating each thread separately for each device but just updating my site and posting the release info here.)
Quick Links
FAQ
Installation Walkthrough
Kitchen Usage Walkthrough
Change Log and Known Bugs
Download Links
**Warning**
Before using this kitchen, you MUST read the walkthrough. Any questions that have been answered there and in the FAQ will be ignored. This is your only warning.
**Disclaimer**
I am not responsible for any damage that may be done to your phone with a ROM created in this kitchen.
I am not responsible for any damage done to your computer.
I am not responsible for anything... at all.
Introducing SuperJustKitchen!
SuperJustKitchen is based on ervius's excellent Visual Kitchen.
Features
A completely stripped ROM. All the files have been categorized in order to remake packages of all the programs that come stock on the HTC ROM.
LZX and XPR compression
6.1 and 6.5 support
Auto XIP and SYS porting
Auto ULDR removal (Gain 3mb of storage.)
Auto NBH packing
Auto Flashing (for testing your ROM before it's released to the wild)
Simplified structure. Click on RunMe to run and Support for support
Script to convert old OEM packages to new EXT packages
Auto file conflict fix (don't have to removing older file that conflict (not that there are any. )
Script for auto UPX compression of EXT folders
Script for auto compression of all PNG's in the kitchen
Save custom ROM settings (for cooks for multiple ROMs)
And more!
Builds included
21054 - WM6.1
21869 - WM6.5 with older GUI - Newer internal code - COM2 branch 23071 - WM6.5 with new redesigned GUI - COM3 branch
This is now an ENGLISH only kitchen. It is just too hard to keep up with 13 different languages! If anyone is interested in taking over the other languages, please let me know.
NOTE: In order for me to keep track of whether my time was well spent or wasted, if you use this kitchen to make a ROM, please either include SJK in the name or just mention that it was SJK cooked in your ROM's thread.
NOTE: This kitchen assumes that you know how to flash through SD, recover from a bad flash and are able to backtrack your steps to figure out how you broke your own ROM. If you do not understand these, please learn them first. Do not PM me asking me. I have written numerous walkthroughs on all these except on how to backtrack your steps. For that, just remember what you're doing as you do it and keep backups.
FAQ
FAQ
Q: Can you get me package YYYY?
A: No. I will provide packages as I create them. I will not take requests. It takes a LOT of time to make a package, especially when I'm making it for 13+ languages. It takes a long time to find the corresponding packages or to create them from scratch.
Q: Will this work on my [Insert device other than Herald/Wing]?
A: Not, yet. That is why it's posted on the Herald forum.
Q: Will I be able to recreate JustHome or JustStable with this kitchen?
A: No. This is a completely new base. I made this kitchen and these ROM base from scratch.
Q: Will you personally teach me how to....?
A: No.
Q: My phone won't boot after flashing your ROM!
A: You disabled something you needed. Keep track of what you disable and then reenable the stuff that you need.
Q: My phone is bricked!
A: You didn't follow the instructions!
Q: When I use this, I get an error.
A: You didn't follow the instructions!
Q: How do I flash this?
A: It's not a ROM.
Q: How do I flash a ROM I make with this?
A: You must know how to flash before you use this. You must know how to recover from a bad flash. You must know the difference between USPL and HardSPL. You must know how to flash through the SD if needed.
Q: Will this work with Windows XP, Vista or 7?
A: All of the above. Just remember to follow the install instructions.
Walkthrough
Installation:
Step 1
Download the newest build from the download links.
Step 2
Extract the SuperJustKitchen folder into c:\kitchens\
Now you should have c:\kitchens\SuperJustKitchen\RunMe
Step 3 (Optional)
Extract the SuperJustKitchen shortcut into your desktop.
Step 4(Vista and Windows 7 only)
Go to your Start Menu and then click on Start Search or RUN.
Type in "c:\kitchens\SuperJustKitchen\Working_Folder\" without the quotation marks and press Enter.
Right click on erviuskitchen and click on properties.
Click on the Compatibility tab.
Place a check mark on Run this program as an administrator.
Press ok.
Change Logs and Bug Reports
Known Bugs
23047
No known bugs
21864
No known bugs
21064
Older Arcsoft don't work with this
All builds
No known bugs
******************************
Change Log
Unreleased
To-do for Future Release
Info ported to Herald
Info integrated into kitchen support script
Enhance kitchen support script to auto upload support information
Enhance support script to include system information
Enhance script to give option for kitchen host support and ROM/Device support
Add built in HardSPL installer (if you can use USPL, you can also HardSPL.)
Expand RunMe script to encompass support script and HardSPL.
Once info integration is completed, create script to auto detect incompatible phones
If phone is Herald and the IPL version is lower than 4.0, auto update IPL and SPL to newer IPL/SPL before automatically HardSPL'ing phone.
Include "restore to factory default" option. (Autodownload needed RUU from server, USPL into phone to override HardSPL.)
Indepth Cooking walkthrough to supplement kitchen walkthrough
Scripted installer with desktop shortcuts
Scripted Simple new build Port assistant
Much much more
Released
0.6
Cleaned up the Herald's initflashfiles and older packages (This fixes the double control panel icons.)
Ported 21869 and 23071
Cleaned up the Opal OEM a little.
Organized some EXT into categories. (This is still a work in progress.)
Starting with v0.6, I've created a script on my end that will automatically compress the kitchen and separate it into multiple parts:
SJK - The main kitchen files.
OPAL - The Opal files.
HERALD - The Herald files.
SYS - The Build files (Both SYS and XIP.)
EXT - The EXT files.
This should make it easier to update things from now on. I'm going to have scripts to only update certain things. This way, you should only need to download whatever has had the changes, instead of the whole kitchen. Later on, I hope to create an updater that will do these updates for you automatically. (At first, I won't be able to update the EXT without deleting any custom EXT's added by you, the user.)
0.5
English only support
MANY new EXT's (multiple versions for now)
Opal support
All EXT's are being categorized... work in progress
0.4
Added updated packages for the programs that are language agnostic.
Added 23060 and 23420 builds. Fixed their button issues by using 23053 to fill in the blanks. (230xx's are more stable, 234xx's are newer and have more features as well as more bugs.)
Added descriptions to every package (albeit, they're a little more technical that I wanted, but I got them straight from Da_G's mouth, so they're bound to be correct.)
0.3.1
I only left 3 builds. The newest 6.1, the newest 6.5 with the old gui and the newest 6.5 with the gui (23047, it's really nice!)
0.3
CABtoEXT - Thanks to Apreinchner - Update: Edited the script heavily (it went from 4 lines to 88 lines) in order to make it sort out and move all the newly created EXT's appropiately.
Ported 23034 all languages - even MORE gui changes!
Ported 23037 - stable
Ported 23409 - Again, MORE GUI changes! (A few bugs, though.)
Converted many of the problematic modules to files in the 23034
Change the all the languages' start menu on the 23034 build CPR to 4
Change ROM version to show that the ROM was built on SuperJustKitchen
Fix Adobe bug
Change ROM version to show that the ROM was built on SuperJustKitchen
Port other languages from 23031
Integrate Sort program into prepare structure - Script it
Presets for each build
Addition of 7 more languages?
Clean ROM more
0.2
Russian initflashfile.dat fixed - 6.5 start menu works fine now
Port 23028 0409 96dpi - deprecated
Change landscape mode in 21016 and 23028 to show 4 icons instead of 3
Script new EXT folder creation - extra buttons
Fix cab and sync bugs in 23016 and 23028
Port 21054 all languages (newest (and possibly the last) wm6.1)
Remove extra netcf's, extra dummy fwupdate, extra SQM's
6.5 compatible autorun
Port 23031 0409 96dpi
updated all language initflashfiles
Fixed issue with SMS on 6.5 builds
Fixed ActiveSync issues
Replace all start menu icons in all 6.5 in all languages with nicer ones
Empty folders disappearing fixed - different installer (placeholders fix it but some of those folders have to be empty...)
Remove compatibility for all other DPI's and resolutions other than 96dpi/320/340 for now to keep size down.
Remove compatibility with languages that aren't compatible with the Herald for now to keep size down.
0.1
Initial Release
Download Links
v0.4+
Just go to the new redesigned http://justkitchen.infoand click on the download section and then on the kitchen section.
v0.3.1
Version 0.3.1 is
SuperJustKitchen - With 21054(wm6.1), 23016(wm6.5), and 23047(wm6.5 with redesigned GUI.)
It's just one file with a ReadMe with instructions on how to install it.
v0.2
Version 0.2 is
SuperJustKitchen - With 21054(wm6.1), 23016(wm6.5), and 23031(wm6.5 with redesigned GUI.)
It's just one file with a ReadMe with instructions on how to install it.
v0.1
Version 0.1 was seperated into different pieces.
Main Kitchen Installer
SuperJustKitchen v0.1 - Alpha 1
Device Specific Installer
Herald
Build Installers
21051 - WM6.1
23016 - WM6.5 - Original WM6.5 interface
23022 - WM6.5 - The "new" WM6.5 finger-friendliness
EXT Installers
Non-DPI Specific EXT
Cooking Walkthrough
Cooking with SuperJustKitchen
*Warning: This is NOT a walkthrough on how to cook. It is a walkthrough on how to use this kitchen.*
The Layout
The Kitchen is stored in c:\kitchens\SuperJustKitchen\
To simply run the kitchen, double click on RunMe.
Advanced users: There will be a different walkthrough for you. (As far as how to add packages, builds, etc.)
The Usage
Once you doubleclick on RunMe, you will be greeted with the main kitchen window.
Here is a screenshot of the process. Use it to follow the steps.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Step 1 - Click on the Device drop down menu and choose Herald (Yes, even though it already says Herald.)
Step 2 - Click on the language drop down menu and choose your language. To find what the language codes mean, see the first page.
Step 3 - Choose a XIP.
Step 4 - Choose a matching SYS.
Step 5 - Make sure you enter a build number other than 2.00.00 in the field near these. Use 5.2.21051 or something similar instead. If not, the ROM will not flash.
Step 6 - Doubleclick on the packages that you want or don't want. (Green means enabled, gray disabled.)
Step 7 - If you want LZX compression, check the LZX Compression.
Step 8 - Click on create ROM.
Wait.
If you get any errors, you probably did not choose a build/language combination included. Look at the list of languages to see what I mean.
Credits
Credits
Ervius for his wonderful visual kitchen (you'll find a donation link for him under Working_Folder.)
HTC for making the HTC ROM
mrhayami for his brainstorming sessions with me to make the recursive scripts
Everyone else that I haven't mentioned
Advanced Tips and Tricks
Advanced Tips and Tricks
This section will detail both advanced cooking tips and advanced usage of my kitchen.
Kitchen structure:
If you notice, the structure of the kitchen is different from the old kitchens.
The only folders you need to worry about are the following:
Cooking Folders
EXT - This is where you would add new programs. EXT packages are similar to OEM packages, but they have a slightly different layout. They are processed by the kitchen after the OEM, so their settings are never overwritten by the stock settings of the base ROM.
OEM - You'll notice that within OEM, you have a HERALD folder. The reason being that this kitchen supports multiple devices at a time. Within the Herald folder, you'll notice several folders.
The .VM is used for memory mapping. DO NOT TOUCH THIS under ANY circumstance.
The COMMON folder where you would find most of the what you'd normally see in your old style OEM folder. (OEMAPPS, OEMDRIVERS, etc.)
Various folders named with 4 letters/numbers. These are language packs. They used to be part of the OEM folder but have been seperated to allow the kitchen to choose which language to cook more easily.
ROM - Inside you'll notice the following:
Device specific folder - Holds all the device specific XIP files/modules, including the nk (which is NOT a native 6.5 kernel.)
SHARED - Where the non-device specific parts go. This is what gets "ported" automatically by the kitchen. This makes it very simple to release upgrade ports to the kitchen.
SYS - The OS files. These are also divided by language, DPI and by resolution. (QVGA, SQVGA, WQVGA, VGA, etc etc) You will only be able to choose DPI's and resolutions compatible with your device.
Other folders:
RELEASE_Device - This is where your flashing software is and where the ROM ends up at in NBH format.
Prepare - I store things here for different reasons. At the moment, it holds the template for a 13 language EXT package.
Other features:
Extra buttons: Click this to access extra features.
The EXT version lets you choose between different EXT's compatible with different DPI's with the common ones (compatible with all DPI's) always displaying.
To be continued...
---Reserved---
Yep, still reserved.
It's still a work in progress, but I am ready for comments.
ivanmmj said:
It's still a work in progress, but I am ready for comments.
Click to expand...
Click to collapse
Commented. I'm trying it out now...figuring out how to work it.
Hah, love the FAQ
Question: For WM6.5 builds, do you have to check the Real WM 6.5 AKU box on the main kitchen screen? Or does it not matter? (I'll be finding out in a minute, anyways, lol)
i may have found a bug. I dont know remember the packages i chose but when it comes down to creating the rom i get a kitchen_build_rom.bat error. i dont get that anymore after altering the packages with HERALD, 409, EXT 0096, 96 DPI, dpi_96_resh_204_resv_320, 1.01.23016 ver., 23016 XIP, 23016 SYS.
Also, i havent been able to create a flash able rom yet. how do you reset the settings to default?
Edit: forgot to mention im on windows 7 build 7100. And yes i did do what was required on the 1st page.
I keep getting a file is corrupt error when I try to flash?
eichenberg said:
I keep getting a file is corrupt error when I try to flash?
Click to expand...
Click to collapse
Yo tambien.
The FAQ says that we didn't follow the instructions, lol.
My NBH is +50 MB, so idk what's the problem....hmm...
Wow works great! Im flashing through SD though. Just made a quick 6.5 build came out with 67.41 Storage and 25 ram
illconcepts said:
Wow works great! Im flashing through SD though. Just made a quick 6.5 build came out with 67.41 Storage and 25 ram
Click to expand...
Click to collapse
Yea, I think the .NBH files have to be over 50 MB in order to flash through PC. Anyone confirm that? (I'm trying out a 6.1 build, with the new Motorola homescreen, cuz it's sick)
ace10134 said:
Yea, I think the .NBH files have to be over 50 MB in order to flash through PC. Anyone confirm that? (I'm trying out a 6.1 build, with the new Motorola homescreen, cuz it's sick)
Click to expand...
Click to collapse
Let me know if you get that Moto home to auto start... im stumped.....
ace10134 said:
Hah, love the FAQ
Question: For WM6.5 builds, do you have to check the Real WM 6.5 AKU box on the main kitchen screen? Or does it not matter? (I'll be finding out in a minute, anyways, lol)
Click to expand...
Click to collapse
Do NOT check it. It will attempt to set all the modules to use another set of virtual memory that is not available to our NK.exe. It's only for originally 6.5 devices.
DestructDez1 said:
i may have found a bug. I dont know remember the packages i chose but when it comes down to creating the rom i get a kitchen_build_rom.bat error. i dont get that anymore after altering the packages with HERALD, 409, EXT 0096, 96 DPI, dpi_96_resh_204_resv_320, 1.01.23016 ver., 23016 XIP, 23016 SYS.
Also, i havent been able to create a flash able rom yet. how do you reset the settings to default?
Edit: forgot to mention im on windows 7 build 7100. And yes i did do what was required on the 1st page.
Click to expand...
Click to collapse
What was the error and what do you mean altering? I made this kitchen mostly on Windows 7 build 7100.
As far as default settings, I didn't include a default ROM. There are many things you should not disable if you want a booting ROM.
eichenberg said:
I keep getting a file is corrupt error when I try to flash?
Click to expand...
Click to collapse
If your ROM is smaller than 52100kb, then it has to be flashed through your SD card.
ace10134 said:
Yo tambien.
The FAQ says that we didn't follow the instructions, lol.
My NBH is +50 MB, so idk what's the problem....hmm...
Click to expand...
Click to collapse
How big is it? See above answer.
Hello everybody!
It's finally there: Windows Mobile 6.5 for the Samsung GT-C6625 Valencia (English)!
- This is the FIRST English Installation Guide translated and made by myself (Thekn)!
- This is also the FIRST WM 6.5 English Development Thread!
There are four versions:
WM 6.5: 21745, 21854, 23017, 28004
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
--------------------------------------------------------------------------------------
WM 6.5 Release Notes (this is just a google translation)
1. Integrated Plum Input, Phonetic Search, and IP Dialing
2. 12 M Microsoft Elegant Black Font
3. Quick List add Restart option
4. Integrated SIM Card Manager, Notepad 3.2, Title Bar Clock, Unit
Converter, JAVA, Resco Explorer 2007 (unregistered) and Registry Editing
software
5. Registry optimization, Integrated, and Delicacy Theme Titanium
6. GPS testing will no longer use this forum to provide the finished version
of the users, reduced to English
7. The hook warning tone provided by other Forum users should compare
the current compromise solution
8. Retention MSN and Windows Lives
9. Streamlining some of the English version of the software and the color
and theme unused
10. In addition to 28,004 outside the WM6.5 ROM version 6.5 are integrated
color Menu
------------
Part of the version of the Source SYS
1. 21745 official 6.5 from I637
2. 21854 from HTC's snap
3. 23017 and 28004 from the network, specific unknown
4. 20758 from the original English rom C6625
--------------------------------------------------------------------------------------
All credits go to the C6625 Forum at www.zn520.com!
http://www.zn520.com/viewthread.php?tid=2545&extra=page=1&orderby=replies
--------------------------------------------------------------------------------------
Installation Guide
FIRST OF ALL: BACKUP ALL OF YOUR DATA AND FILES, YOU CAN USE A NICE PROGRAM CALLED SPRITE BACKUP
(http://www.spritesoftware.com/products/sprite-backup/full-edition)
ALSO I AM NOT RESPONSIBLE FOR ANY DAMAGE DONE TO YOUR DEVICE BY FLASHING THIS ROM
FOR RESTORING TO THE ORIGINAL FIRMWARE LOOK DOWN AT THE RESTORING PART
Requirements:
- The RAR file
http://www.zshare.net/download/7596057276bfeb69/
http://www.megaupload.com/?d=UJA5XBCE
password: Thekn
- A Windows XP Machine (I tried it on Windows 7 but it didn't worked for me)
Installation:
- Extract the downloaded RAR file (there will be 3 maps)
- Go the the BIN Files map and choose one of the maps containing .bin files
(I think 28004 is the latest).
- Grap the .bin file you want and copy it into the ROM folder.
- Copy or Cut the ROM folder to the root of your HardDisk (C:/ROM)
- Copy the Home Patch.cab (English Patch.cab to your SD Card (on the root (SDCARD:/Home Patch.cab)
- Install the 2 Drivers in the folder DRIVERS
(there is a change that you get a warning for installing the drivers, just continue)
- Turn of your phone and plug-in the USB cable
- Now turn on your phone while pressing also the green call button
(Power + Call)
- Now you're in the Bootloader Mode (when you get a message on your pc
for installing the drivers click on NO (so don't use Windows update) and let
it search for the drivers. It will find one of the drivers in the DRIVER folder
you just downloaded and install it again.
- Then go to the ROM map (C:/ROM) and run the PDAFLASH_ActiveSyncTotal(1016).exe
- Then it will automatically download the new WM 6.5 ROM to your C6625
- When it's finished it automatically reboots
- When the startup progress is ready you will see the TouchWiz interface and it's all Chinese
- Just don't click on anything and wait for 2-3 minutes (when it doesn't restart automatically
and you noticed that the D-Pad buttons aren't working just hold on the Power button
and it will automatically restart
- When starting up you see a Vodafone logo (this doesn't mean there's a
simlock, maybe we can change it later)
- When the startup progress is ready: press the left softkey 2 times (start)
- And then choose the File Explorer icon (you'll see after the startup its Resco Explorer 2007)
- Go to the Windows folder and press and hold the right D-Pad button to scroll faster
and search for fexplorer.exe and launch it
- Now hold the HOME button (the house button under the left softkey) so the
Task Manager opens and stop the Resco Explorer 2007
- Now in the Task Manager click on the normal File Explorer icon to open it
- Go to the SD Card and install the Home Patch.cab (English Patch.cab), when it's fully installed press the
left softkey to reboot
- After this you will notice everything is English! (You can change your location in:
Setting --> Regional Settings
- Register Resco Explorer 2007 yourself
--------------------------------------------------------------------------------------
New Keyboard Input
In the Text Field:
- Press the SYM button to change to ENG
- Press and hold the SPACE BAR to activate the symbols
- Press and hold S (*) for the T9 (it's menu number 4) or without
AutoText number 5)
- For Keyboard Symbols press and hold the letter
--------------------------------------------------------------------------------------
Known problems
- Some parts of the UI are still Chinese (Maybe you can edit the Register,
let us know)
- There may be some problem with the 3G Network but i think that's only in
China. I don't have any problems (I'm from the Netherlands, Provider:
Telfort).
- You have to manually put in the GPRS settings for the Provider Internet
--------------------------------------------------------------------------------------
For restoring to the latest original Firware:
Samsung C6625: Latest Official Firmware + Official Flashing Guide by Samsung
http://forum.xda-developers.com/showthread.php?t=689423
--------------------------------------------------------------------------------------
For this nice tweak:
Visit:
Increase Screen Size using 96DPI + Menu Tweak
http://forum.xda-developers.com/showthread.php?t=680233
--------------------------------------------------------------------------------------
All credits go to the C6625 Forum at www.zn520.com!
http://www.zn520.com/viewthread.php?tid=2545&extra=page=1&orderby=replies
--------------------------------------------------------------------------------------
Happy Flashing and Cooking,
Thekn
I cook New ROM WWE, but i don't have this device
Nokser said:
I cook New ROM WWE, but i don't have this device
Click to expand...
Click to collapse
You will cook a new ROM? Or have you already cooked a ROM?
Anyway, I appreciate your help a lot! There is no Samsung Valencia ROM
development so every step is a step closer!
I know, but I must have device for testing ROM
We must think of something
Nokser said:
I know, but I must have device for testing ROM
We must think of something
Click to expand...
Click to collapse
maybe this can help?
See the attachment for link!
----------------------------------
Samsung Windows Mobile SDK 1.2.1
The Samsung Windows Mobile SDK offers APIs to use advanced features unique to Samsung phones. You might already have experience using advanced capabilities featured in the Windows Mobile APIs, like GPS, Bluetooth, or multimedia support. In addition to the Microsoft Windows Mobile APIs, you can use Samsung APIs to access phone features such as the accelerometer, notification LEDs, and haptics feedback.
Version 1.2.1 of the SDK now includes two signed CAB installers in the redist directory, one for Samsung Windows Mobile Professional devices, and one for Samsung Windows Mobile Standard devices. Please see the Installation Guide for more details.
It also includes the new features of Version 1.2.0 of the SDK (new APIs for FM Radio and dual camera functionality and support for three new phones:
the GT-C6625 Valencia,
SCH-m490/m495 T*Omnia,
and GT-I8000 Omnia II.)
The MD5 check sum for Samsung Windows Mobile SDK 1.2.1 Installer.msi is ed7b50d8f085e5df9929131340df8401
I have a notion of what it is
I create apps from this SDK, for Samsung
See this my friend:
http://innovator.samsungmobile.com/platform.main.do?platformId=2
Anyway, I'm going to bed now!
I will see your reply in the morning!
Thanks for your help!
Nokser said:
I have a notion of what it is
I create apps from this SDK, for Samsung
See this my friend:
http://innovator.samsungmobile.com/platform.main.do?platformId=2
Click to expand...
Click to collapse
haha oke, i thought it could help!
I see it, your a ROM developer!
If you need any help, your welcome!
I can test anything on my device!
Have a nice sleep.
I do not sleep too much
Always at your service
Nokser
Thekn said:
haha oke, i thought it could help!
I see it, your a ROM developer!
If you need any help, your welcome!
I can test anything on my device!
Click to expand...
Click to collapse
I think on this, but tomorrow
Tomorrow I'll do a little test, so be ready
Nokser said:
Tomorrow I'll do a little test, so be ready
Click to expand...
Click to collapse
how are you doing today?
Have you done any tests?
I build this test now
How can you give me another link to the original ROM
Nokser said:
I build this test now
How can you give me another link to the original ROM
Click to expand...
Click to collapse
what do you mean by another link to the original ROM?
I have a link in the attachment to a forum with the latest firmware C6625XXIG5!
do not want netload
Nokser said:
do not want netload
Click to expand...
Click to collapse
Netload is the only site that doesn't require a login acount.
There is another site where you can download it but you have to sign up for an acount.
http://www.mobilfunk-faq.info/en/downloads/c6625/411/samsung-c6625-firmware-c6625xxig5-3320/
Maybe I can download it and upload it on a site you like?
Thekn said:
Netload is the only site that doesn't require a login acount.
There is another site where you can download it but you have to sign up for an acount.
http://www.mobilfunk-faq.info/en/downloads/c6625/411/samsung-c6625-firmware-c6625xxig5-3320/
Maybe I can download it and upload it on a site you like?
Click to expand...
Click to collapse
Give it to me at 4share in two parts
Thanks
On the official samsung website they say :
Update to Windows Mobile 6.5 via new PC Studio.
Did somebody try ?
business(dot)samsungmobile(dot)com
it doesn't work i believe...
guidouil said:
On the official samsung website they say :
Update to Windows Mobile 6.5 via new PC Studio.
Did somebody try ?
business(dot)samsungmobile(dot)com
Click to expand...
Click to collapse
any updates nokser
Dear forum members,
Update on 8/10/2010 10:30 PM:
The new version V2 that includes Toucflo 2 (build 1919.1432) has been uploaded.
It includes Toucflo 2, YouTube, Facebook, RSS Hub, HTCGeoService, Full Screen Player, MSN Money, MSN Weather
MS My Phone, Market Place, MS Tag Reader, Remote Desktop Mobile, Modem Link, GoogleMaps, HTCOpera, Album, Audio Manager 2,
Audio Booster (Equalizer for headphones) and others.
Important Note:
The Full Screen Player is activated from Album by selecting the desired *.3gp, *.avi and *.mp4 file.
This player is controlled from the central joystick for stop/restart/forward/backward operations.
A new booting image and sound is implemented, the Htc quietly brilliant.
It is a new ROM created with platfrom builder and i will wait for your feed back in order to improve it.
End of Update
********************************
This is the new TyTN II WWE WM6.5 CE OS 5.2.28205 Build 28205.5.3.3 D3D M2D YouTube UC Mobile Vista 6.50 SeaDragon ROM.
The CE image is based on an almost Official WM6.5 CE OS 5.2.28205 ( Build 28205.5.3.3 ) and the new kernel is 6.5_nk.exe.
Version 6.50 includes all required packages in the ROM as M2D and M2DLS (Xda - team manila improved by me),
GoogleMaps, HTCEnchancements, HTCOpera, YouTube, Audio Manager 2, Audio Booster (Equalizer for headphones) and others.
No additional applications are installed with SDConfig.txt by SDAutorun but you can add as you wish with your own SDConfig.txt.
D3D drivers have been checked in the new OS 5.2.28205.
Almost all applications have been redesigned in the SeaDragon colors for this Mobile Vista edition.
A. Screens of the New Mobile Vista 6.50 SeaDragon
Touchflo v2:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Touchflo v1:
B2. Download Links of V1.0
1. WWE OS 5.2.28205.5.3.3 Touchflo V2.0 (build 1919.1432) ROM with no radio:
Rapidshare: http://rapidshare.com/files/4238781...205.MobileVista6.50SeaDragon_TF2_by_ansar.zip
2. WWE OS 5.2.28205.5.3.3 Touchflo V2.0 (build 1919.1432) ROM with radio:
Rapidshare: http://rapidshare.com/files/4239915...adio_sign_25.83.40.02_1.65.16.25_by_ansar.zip
3. WWE OS 5.2.28205.5.3.3 Touchflo V1.0 (build 1818.3719) ROM with no radio:
Rapidshare: http://rapidshare.com/files/4226898...5.28205.MobileVista6.50SeaDragon_by_ansar.zip
4. WWE OS 5.2.28205.5.3.3 Touchflo V1.0 (build 1818.3719) ROM with radio:
Rapidshare: http://rapidshare.com/files/4226972...adio_sign_25.83.40.02_1.65.16.25_by_ansar.zip
5. Note : KaiserCustomRUU.exe is not included in the above zip files, download it here:
Rapidshare: http://rapidshare.com/files/138333883/KaiserCustomRUU.exe
C. Instructions to successfully flash the rom CE image
Here bellows are the Instructions to successfully flash it.
Unzip the downloaded file:
A. RUU_Kaiser_WWE_WM6.5.28205.MobileVista6.50SeaDragon_radio_sign_25.83.40.02_1.65.16.25_by_ansar.zip
in case you downloaded the radio inclusive one or
B. RUU_Kaiser_WWE_WM6.5.28205.MobileVista6.50SeaDragon_by_ansar.zip
if you downloaded the nbh without the radio.
and in the created directory you will have the following:
1. This readme.txt file
2. The control text files SDConfig.txt that includes only the Reset instruction and
3. The nbh image RUU_Signed.nbh file that is with or without radio depending on the downloaded zip file.
Before flashing make a backup of your files in Storage Card using the Data Backup Program or PIM Backup from my previous ROMs or your favorite backup.
After PIMBackup installation perform your data backup in your Storage card.
Place the SDConfig.txt file in the Storage Card and flash the RUU_Signed.nbh image file as follows:
a. Power on TyTN II, if not already.
b. Connect TyTN II to your desktop PC or laptop and perform all steps up to establish an Active sync connection.
Note: in Windows Vista you must have the latest version of Windows Mobile Device Center.
c. Copy the RUU_Signed.nbh in the same directory with KaiserCustomRUU.exe, run KaiserCustomRUU.exe and follow the instructions.
d. After the successful flashing of the ROM, KaiserCustomRUU.exe will make a Hard Reset.
e. You may unplug the USB wire as the new ROM loading process will start.
The ROM flashing process will perform as follows:
a. Loads all splash screens, performs the welcome screen and displays the initial Today screen.
b. Then loads Mobile_Vista theme and installs the cabs that reside in the ROM.
Then it continues by performing the User Customization process as:
c. Loads all files from your Storage card directory as described in SDConfig.txt, if any.
d. Loads the *.xml files of SDConfig.txt, if any, and performs the instructions included in these files.
e. The process will finish after machine's final Reset and final boot.
NB : From time to time check with Task Manager and remove unwanted running apps in order to free up precious ram.
Note 1: The new keyboard layout has options for small and big letters.
It is predefined to initial setup of big letters. In this case the Caps are also displayed with double click on shift key.
Note 2: There is a five item menu activated with a tap on top bar.
Note 3: The long power on key press is assigned to Quick List menu.
Note 4: Regedit (the one part of task manager) and Total Commander are assigned in the known inside hard keys.
These are shown if the default Windows today item is not ticked.
Note 5: As you already noticed all screens (initial splash, windows welcome and AutoRun) are redesigned as well as
the Mobile_Vista.tsk theme, the Comm. Manager, the Phone, the Long Key press, the Audio Manager and the Streaming Media player.
Note 6: The three in one Today Plug-in, WiFi - Phone - Bluetooth, is revealed from tob bar menu tap on phone item and then on COM manager.
Note 7: Internet explorer has two new home screens as well as zoom facility.
The initial screen has on line help, IE Home, HTC Home and Xda Developers.
If you tap on IE Home the typical i.e. home screen is activated.
Note 8: The well known SRS WOW HD driver is in the ROM as package for enhanced HD sound.
Note 9: In old style today the bottom screen plug-in has six small buttons where from left to right you can have:
- The green for on off the phone
- The GPS ephemeris activation
- The memory
- The Bluetooth
- The Icon only for battery charge view. For the settings there is the top bar battery button.
- The screen rotation button.
Note10: Tom Tom 6 navigator is included in as is base of the original package that comes with your device without any map included.
Note11: From Start you can test D3DMdemo that can achieve more than 51 fps.
In order to stop D3DDemo tap on small blue area just bellow top bar and then on the revealed x button.
Finally due to Touchflo as a package inside the ROM, the HTC Home is disabled, but you can use all other Today Items if Touchflo is disabled.
There many other apps in ROM and Total User Customization in order your valuable TyTN II to outperform!
Till next version enjoy!!!
Regards, ansar
_________________
HTC TyTN II 130, thnx to my friends
IPL CPLD-8
SPL 1.0.OliPof
CE image WWE WM6.5 CE OS 5.2.28205 Build 28205.5.3.3 D3D M2D YT UC Mobile Vista 6.50 SeaDragon
posted when was in TytnI section...
Waiting for your rom.
Keep working and keep us in touch.
THX
I realy apreciation your work!
was this canceled?
waiting for....but all this time & not yet
keep working & we still waiting
Hi,
Due to WP7 project, the finalization of the ROM was suspended for a while.
I hope to upload it this week end.
Regards, ansar.
we are all waiting ansar .....
Hi ansar,
realy apreciated , thx for reply we still waiting your rom
hope u coock one naked with only home titanium pluging , no manila no programs
& keep us in touch
thx u very much for your work !!!
Just waitting:d
snopyboy said:
Just waitting:d
Click to expand...
Click to collapse
Hi,
Not any more.
Regards, ansar.
Did anyone test it on Tytn2 yet ?
finaly !!!
thx ansar !!!
downloading..... & flashing now !!
I'll report my results after
thx again ansar ! nice work
Anyone had it work on his Tytn II yet ?
Thank you...
downloading and will be tried....
Hi
HTC Sense ROM when it will be available
MTom said:
Hi
HTC Sense ROM when it will be available
Click to expand...
Click to collapse
Hi,
First screen shoots will be provided today but final image not sure.
Are you let me proceed with wp7?
Regards, ansar.
Slow
my 1st impression is this ROM is slow.
slow booting, slow customization, slow response to screen clicks.
I revert back to Original ROM after 5 min. of testing.
Does anyone face this? or I'm the only one here!
ansar.ath.gr said:
Hi,
First screen shoots will be provided today but final image not sure.
Are you let me proceed with wp7?
Regards, ansar.
Click to expand...
Click to collapse
i waiting wp7 rom.
Links provided no longer exist, can anyone please post updated link?