{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello everybody!
Here is the latest official ROM for the Samsung C6625 aka Valencia (C6625XXIG5 of July 2009)!
http://netload.in/dateiydK42yjq0N.htm
I have also found a official Flashing Tutorial by Samsung Mobile!
Use it at your own risk! I'm not responsible for any consequences
when flashing, tweaking, or customizing your mobile
or using stuff without the permission of the official owner.
http://www.zshare.net/download/76551635ba1ffdf0/
Password: samsung-stuff.de
It contains information about:
GSM & WCDMA General Specifications
GSM TX power class
Product Fuction
Array course control
Software Downloading
Pre-requsite for Downloading
S/W Downloader Programs
Reference data
Safety Precautions
Each page contains this message:
SAMSUNG Proprietary_Contents may change without notice
This Document can not be used without Samsung's authorization
So be aware!
--------
Installation Guide:
- Download the C6625XXIG5.rar: http://netload.in/dateiydK42yjq0N.htm
- Extract the C6625XXIG5.rar
- There will be a folder named C6625XXIG5
- Rename it to ROM
- Move it to C:\ (so the path will be: C:\ROM)
- Download the Samsung C6625 CP_Diver.rar:
http://www.megaupload.com/?d=OVF9F5MH
http://netload.in/dateifSuc52X8Cf/Samsung C6625 CP_Driver.rar.html
- Extract the Samsung C6625 CP_Driver.rar and place it on your Desktop
- Shut down your device and plug-in the USB-Cable
- Now go to the C:\ROM folder and click on PDAFLASH_ActiveSyncTotal(1016)
- You will see this:
--------
File Path
C:\ROM\Click_all.Ist
Status
Device Disconnected!
Current Download File:
(This place will be empty)
--------
- Click on the icon with the device with the green screen and the red arrow
- Now press the power button and the upper volume button of your device
at the same time and hold them until a message appears on your screen
- Now the Flash program will start automatically
- When finished, is will restart automatically
- It will start up and load everything
- Let it configure for a couple of minutes so don't press anything!
- After the setup your device will restart and now you're ready to go!
--------
Good Luck,
Thekn
nice theme !!
trantiena10 said:
nice theme !!
Click to expand...
Click to collapse
Yeah it's the promoting advertisement for the C6625. The funny thing is, the theme is from the C6620 and doesn't exist for the C6625
Cook the ROM ...
1. Extract the C6625XXIG5.rar, There will be a folder named C6625XXIG5, get a file NAND.BIN
2. dump files:
osnbtool -sp NAND.bin
osnbtool -sp nand.bin.BIN.NB0
rename nand.bin.bin.nb0.OS.NB os.nb
osnbtool -d os.nb 1 xip.bin
osnbtool -d os.nb 2 imgfs.bin
imgfstodump imgfs.bin -> get a folder named dump
-(the rest work is kitchen ...)
3. now do a test, build a new NAND.bin
- delete some "useless" files in the dump folder
ImgfsFromDump imgfs.bin imgfs.new
osnbtool -c os.nb 2 imgfs.new
osnbtool -extra os.nb.NEW
- open the file os.nb.NEW.EXA with WINHEX, Define a block from 161600 to 3231ff, and delete the block, save and exit
osnbtool -2bin os.nb.NEW.EXA 0x002E2E00
move /y os.nb.NEW.EXA.bin NAND.bin
......
py8 said:
Cook the ROM ...
1. Extract the C6625XXIG5.rar, There will be a folder named C6625XXIG5, get a file NAND.BIN
2. dump files:
osnbtool -sp NAND.bin
osnbtool -sp nand.bin.BIN.NB0
rename nand.bin.bin.nb0.OS.NB os.nb
osnbtool -d os.nb 1 xip.bin
osnbtool -d os.nb 2 imgfs.bin
imgfstodump imgfs.bin -> get a folder named dump
-(the rest work is kitchen ...)
3. now do a test, build a new NAND.bin
- delete some "useless" files in the dump folder
ImgfsFromDump imgfs.bin imgfs.new
osnbtool -c os.nb 2 imgfs.new
osnbtool -extra os.nb.NEW
- open the file os.nb.NEW.EXA with WINHEX, Define a block from 161600 to 3231ff, and delete the block, save and exit
osnbtool -2bin os.nb.NEW.EXA 0x002E2E00
move /y os.nb.NEW.EXA.bin NAND.bin
......
Click to expand...
Click to collapse
Thanks brother! I've been waiting for this! This is great!
Ps. Which kitchen is the best I can use?
Time to cook again.. thanks py8..
move on Thekn..
TheKn
Mind to re-up the "Samsung C6625 CP_Diver.rar" like netload or rapidshare, cause megaupload did not work in HK, A Big TKS in advance.
Cheers/Blackfire920
blackfire920 said:
TheKn
Mind to re-up the "Samsung C6625 CP_Diver.rar" like netload or rapidshare, cause megaupload did not work in HK, A Big TKS in advance.
Cheers/Blackfire920
Click to expand...
Click to collapse
added another mirror!
TheKn
U're a STAR.TKS
Cheers/Blackfire920
TheKn
Is there any mms app for c6625 other than the one from samsung, currently picture mms are ok (in/out) but all email mms was not working, I switch the sim card to a old motorola v3xx and it was fine...funny things is that when there's a inbound email mms, the "+" hsdpa sign was on and those email mms just can't land...may be the phone company change some setting... so switching mms app may be a solution...?
TKS in advance
Cheers/Blackfire920
blackfire920 said:
TheKn
U're a STAR.TKS
Cheers/Blackfire920
Click to expand...
Click to collapse
You're welcome!
blackfire920 said:
TheKn
Is there any mms app for c6625 other than the one from samsung, currently picture mms are ok (in/out) but all email mms was not working, I switch the sim card to a old motorola v3xx and it was fine...funny things is that when there's a inbound email mms, the "+" hsdpa sign was on and those email mms just can't land...may be the phone company change some setting... so switching mms app may be a solution...?
TKS in advance
Cheers/Blackfire920
Click to expand...
Click to collapse
Arcsoft MMS:
http://www.1800pocketpc.com/2008/05/27/arcsoft-mms-50317.html
Thekn said:
Hello everybody!
Here is the latest official ROM for the Samsung C6625 aka Valencia (C6625XXIG5 of July 2009)!
http://netload.in/dateiydK42yjq0N.htm
I have also found a official Flashing Tutorial by Samsung Mobile!
Use it at your own risk! I'm not responsible for any consequences
when flashing, tweaking, or customizing your mobile
or using stuff without the permission of the official owner.
http://www.zshare.net/download/76551635ba1ffdf0/
Password: samsung-stuff.de
It contains information about:
GSM & WCDMA General Specifications
GSM TX power class
Product Fuction
Array course control
Software Downloading
Pre-requsite for Downloading
S/W Downloader Programs
Reference data
Safety Precautions
Each page contains this message:
SAMSUNG Proprietary_Contents may change without notice
This Document can not be used without Samsung's authorization
So be aware!
--------
Installation Guide:
- Download the C6625XXIG5.rar: http://netload.in/dateiydK42yjq0N.htm
- Extract the C6625XXIG5.rar
- There will be a folder named C6625XXIG5
- Rename it to ROM
- Move it to C:\ (so the path will be: C:\ROM)
- Download the Samsung C6625 CP_Diver.rar:
http://www.megaupload.com/?d=OVF9F5MH
http://netload.in/dateifSuc52X8Cf/Samsung C6625 CP_Driver.rar.html
- Extract the Samsung C6625 CP_Driver.rar and place it on your Desktop
- Shut down your device and plug-in the USB-Cable
- Now go to the C:\ROM folder and click on PDAFLASH_ActiveSyncTotal(1016)
- You will see this:
--------
File Path
C:\ROM\Click_all.Ist
Status
Device Disconnected!
Current Download File:
(This place will be empty)
--------
- Click on the icon with the device with the green screen and the red arrow
- Now press the power button and the upper volume button of your device
at the same time and hold them until a message appears on your screen
- Now the Flash program will start automatically
- When finished, is will restart automatically
- It will start up and load everything
- Let it configure for a couple of minutes so don't press anything!
- After the setup your device will restart and now you're ready to go!
--------
Good Luck,
Thekn
Click to expand...
Click to collapse
is there a similar guide fro the samsung sph-i325 aka samsung ace?
I posted a request here: http://forum.xda-developers.com/showthread.php?t=708471 but no responses yet
firmware mirror
Can you post firmware mirror????
i have problem with netload in my country. (Too slow....)
Thanks.
I reinstalled the WM, but the phone is still locked in the network. Please help me unlock it? plssss
Cipylan said:
I reinstalled the WM, but the phone is still locked in the network. Please help me unlock it? plssss
Click to expand...
Click to collapse
because it doesn't provide a sim unlock! try to search for a sim unlock!
what version of WM is this? still 6.1? standard?
ajoesmith said:
what version of WM is this? still 6.1? standard?
Click to expand...
Click to collapse
yeah it's the latest official samsung c6625 rom (wm 6.1)
Need help flashing c6625
I can't even flash my device to C6625XXIG5
when i try i can't get an usb connetction.
It says phone usb cable is not conneted,
or key is not pressed.
What am i doing wrong.
Sorry, i was too fast, i found somthing
about other drivers.
I've installed then end it worked.
Now i wil try remora V2.
Getting the same as before,
don't know what i'm doing wrong.
Related
Universal WM6 ROM Kitchen
Finally I'm able to steal some time to upload this Kitchen, the intention is to get everybody involved and understand and maybe help with the development of wm6 for universal, and also everyone can built their own personalize universal WM6 ROM, hopefuly user or any rom modder sending some patch or registry modification or some part update to the kitchen...
Big Thanks to MAMAICH and also my friend Bepe, the two Genius on the forum I know...
Most of this Guide is taken from bepe's, and also some of the dev tool are taken from Bepe's, and ofcourse MAMAICH so credits goes to them also for his great method and tools!
lets start,
helmi
----------
ROM Kitchen is a tool to cook your personal Universal Windows Mobile 6 ROM by the packages you need.
Your Computer must have .NET Framework v2.0 installed!
THE KITCHEN:
Someone might need to mirror it somewhere?
ftp://xda:[email protected]/Uploads/Universal/helmi_c/helmi_uni_wm6_kitchen_r0.rar
OEM Pack Included in R0 Kitchen (Most of it part are newer then currently available rom):
Camera&MMS=3.5.1.5
CommManager=1.3.7.0
mHub=6.29.061106.I0
PicturesExt.dll=1.20.911.610
PowerService.dll=2.15.1.0
WirelessMgr_Service.dll=2.21.0.0
NETCF2_SP2= .NET Compact Framework 2 SP2
JAVA
SIM_Mgr=5.30
STK_Service.dll=4.47
StreamingMedia=2_10_1025621
Zip=1_20_25226_1
ps: the kithen is ready to build vanilla version, just
1. Click createos.exe
2. Click start button (createos.exe dialog) wait till its finish.
3. Click CreateROM.BAT, click encode, browse nk.prj, set operator
4. flash....Done.
OEM PACK:
I'm just too lazy to link them one by one...
BTFtp=1_1_27419_1
BTSapProfile.v1.45
CambridgeMSBTPlug-In
HtcWmpPlugin
Indialler_Phonepad_15_Language
MS.VoiceCommand=1.6_UNIVERSAL
OneNoteMobile=12.0.4518.1010
Pocket_MSN
PocketXPDF=0.50
Resco_Explorer 5.42
SDDaemon_UNIVERSAL
StowawayBTMouseKeyboard
SymbolPad=1_0_24075_1
Szilamer_BubbleFix
Szilamer_WordSuggestionFix
TaskManager=1_0_27407
USB_HDD
VGAMode
VOIP
WinliveVGA
WM5torage 1.7.3
WM6_CustomerFeedBack
NETCF2_SP2
JAVA
Zip=1_20_25226_1.rar
more will be added by others maybe? TOMTOM? SPB PLUS?, wiki page might be ideal for this...
How-To build a ROM:
1. Extract the kitchen pack to the c:\DEV folder (create the folder if u dont hv it)
2. Extract OEM Packages you need to OEM folder
3. Run CreateOS.exe and click the button
4. Run CreateROM.bat, proccesing....
5. HTC64_Extended_ROM_Tool.exe will start, click encode, then browse for C:\Dev\Helmi_UNI_WM6_Kitchen_R0\Temp\nk.prj then click next.
6. Set ur operator in operator name text field, default is set for 02 (02__01) u might change this to TMOB, MDL, etc then click encode when u finish to convert nk.nba to nk.nbf, the nk.nbf (ROM) will locate at C:\Dev\Helmi_UNI_WM6_Kitchen_R0\Temp folder.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
7. ROMUpgradeUt.exe will start to update the rom to ur device or u might cancel if u planning to update latter.
Done! U Just create ur personal Universal WM6 ROM!
How-To build ur own OEM Package:
An OEM Package is just a simple folder containing files and registry settings for the ROM
First of all you'll need a GUID number for your Package.
Go to http://www.famkruithof.net/uuid/uuidgen to get one.
In my case:
283b9db7-cb03-4c1b-820e-ca49b2c3b5db
Necessary steps:
1. Create a new folder:
Dev/OEM/[Your package name]/
2. Create a empty text file:
Dev/OEM/[Your package name]/283b9db7-cb03-4c1b-820e-ca49b2c3b5db.dsm
(CreateOS.exe will finish this file for you)
If needed:
3. Create an UNICODE text file:
Dev/OEM/[Your package name]/283b9db7-cb03-4c1b-820e-ca49b2c3b5db.rgu
This file could be used to add registry entries to the ROM
First line is:
REGEDIT4
...
and there MUST be a empty line at the end!!
4. Create an UNICODE text file:
Dev/OEM/[Your package name]/initflashfiles.txt
This file could be used to create folders or copy files, shortcut on the ROM.
For Example/ Ilustration: Open or read Dev/LOC/initflashfiles.dat using a text editor or any premake initflashfiles.txt at one of the OEM folder.
and there MUST be a empty line at the end of iniflashfiles.txt also!!
Copy all files you need to Dev/OEM/[Your package name]/
How to change Universal paging pool SIZE:
Open nk.nba with hex editor and search for hex 64B00000640000002E2E2E2E00002E00 with 2E as a joker string and the last 2E00 is ur paging pool size. or just goto offset 51A502 and start mod ur paging pool see ilustration bellow:
the picture show us 4.8mb(48) paging pool (standart) change to 60 (6mb), 70(7mb), or any size u like.
How to fake ur CE version and OS Built
(only if u kinda person who like to fake stuff, not recommended thought)
How to fake ur CE version:
open nk.nba/nk.fat with any hex editor and go search unicode string 2.00.02 (the real version) or goto address 477C and 31437C and modify to any version u like, 2.99.99 or 2.00.99 or 2.01.06 or 2.01.08 or maybe 9.99.99? if u like... but still, its a fake, well its up to you...
Ilustration picture:
How to fake ur OS Build:
convert shellres.dll.0409.mui module (dir) to file and edit string 918 at resource ID 14683 and 14684 to any OS version u like, u'll have OS build 10.10 (Build 99999) OS if u like...but still, its a fake, well its up to you...
Ilustration picture (u'll hv OS 10.50.9999 (Build 99999) isn't amazing? more update then ms one...:
How to cook ur Extended_ROM
I'll update someday, running out of time...
Well, the kitchen and also some instruction (hopes u guys understand) are here now, so? why dont you guys built ur own personalize WM6 ROM...??
I hope more people will understand and gettin more involved and helpful with rom making stuff after this, and more people will support each others with bugs and updates... lets work togather guys... next would be AKU3.3 and AKU3.5 kitchen if I hv time...
hopes that i'm not forgot about something...lol...
regard,
Helmi
EDIT:
Added wiki page by my old buddy GerardNL, Thanks GerardNL, my friend...
Kitchen WIKI:
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal_WM6_Kitchen_Helmi
the link doesnot work.
what a great guide, but can't download the kitchen..
ftp://xda:[email protected]/Uploads/Universal/helmi_c/helmi_uni_wm6_kitchen_r0.rar
Link above is working, file download ok for me. File not corrupt.
Helmi
What a great gift ! It makes a little bit easier to understand how to make something face our particular needs. a way to make everyone happy with the parameters and applications he likes. by default.
Thank you !
WoOoOoW. CoOoOoL.
Will download, learn and try.
You have disappear for too long. Beside this kitchen, any new ROMs with Video Call Working?
Very Very thanks from Italy.
helmi_c said:
Most of this Guide is taken from bepe's, and also some of the dev tool are taken from Bepe's, and ofcourse MAMAICH so credits goes to them also for his great method and tools!
http://buzzdev.net/index.php?option=com_simpleboard&Itemid=59&func=view&id=23392&catid=64
Click to expand...
Click to collapse
One matter.
This link doesn't work.
One Question.
One Wizard to translate the roms is it possible?
2nd problem.
I try this:
ps: the kithen is ready to build vanilla version, just
1. Click createos.exe
2. Click start button (createos.exe dialog) wait till its finish.
3. Click CreateROM.BAT, click encode, browse nk.prj, set operator
4. flash....Done.
Click to expand...
Click to collapse
At 3th point after I Browse nk.prj I click Encode and I've this error:
Hi Helmi_C
The link is working for me.
Thank you for the kitchen, great work!
Greetings, Leo
Broken FAQ link
http://buzzdev.net/index.php?option=com_simpleboard&Itemid=59&func=view&id=23392&catid=64
Is the page you Link to Helmi.. I cant call it up either!
cicciocant said:
2nd problem.
I try this:
At 3th point after I Browse nk.prj I click Encode and I've this error:
Click to expand...
Click to collapse
I get the same error code as well!
thx .............
Great Job , Thanks
cicciocant said:
2nd problem.
I try this:
At 3th point after I Browse nk.prj I click Encode and I've this error:
Click to expand...
Click to collapse
Juggles said:
I get the same error code as well!
Click to expand...
Click to collapse
did u guys extract the kitchen to c:\dev ? so the end result should be C:\Dev\Helmi_UNI_WM6_Kitchen_R0, the error is because the nk.nba cant be found... the nk.nba should locate here C:\Dev\Helmi_UNI_WM6_Kitchen_R0\Temp\Nk.nba
cicciocant said:
Very Very thanks from Italy.
One matter.
This link doesn't work.
One Question.
One Wizard to translate the roms is it possible?
Click to expand...
Click to collapse
yes, the link to buzz is dead, I'll erase it...
if you hv another LOC (Localization MUI) it should possible, btw darkforce hv post a rom with many language? u can take its MUI and HTM help file with another language. just replace the loc folder with foreign LOC.
helmi_c said:
yes, the link to buzz is dead, I'll erase it...
if you hv another LOC (Localization MUI) it should possible, btw darkforce hv post a rom with many language? u can take its MUI and HTM help file with another language. just replace the loc folder with foreign LOC.
Click to expand...
Click to collapse
the mui and htm only can replace by OEM folder , in LOC not enough for that,special for IMU very difficult to replace,also need to edit reg key
helmi_c said:
yes, the link to buzz is dead, I'll erase it...
if you hv another LOC (Localization MUI) it should possible, btw darkforce hv post a rom with many language? u can take its MUI and HTM help file with another language. just replace the loc folder with foreign LOC.
Click to expand...
Click to collapse
Thx. I Solved.
TO translate Can I Take the .mui file from Wm5 Aku 3.5 Italian ROM by fly?
It's very difficult?
Ufone Operator ID
Hello Helmi thanks for the Kitchen and love you for the 1.1 Rom.
Can you tell me how to set Operator ID for Ufone in pakistan because I have never been able to successfully change the code that I get "41003" in the phone app even after editing the nbf in WM5 Himalaya Roms as well.
Do I write Ufone_41003 in the Operator Id line or what?
Here is what I get from running CreateOS.exe with extra included (see attached).
Running CreateROM.bat prompts for missing default.hv, boot.rgu which I copy from somewhere in the kitchen. But prompts for Boot.hv which is no where to be found. (Can find in my PPC).
What did I do wrong?
But still able to continue to get nk.nbf. Can flash this? Is this same as Helmi-WM6-v1.1?
i don't know how you guys do it, but thanks very much all of you!!!!
Wow......Great job!
I had been waiting for it for a long time.
http://forum.xda-developers.com/showthread.php?p=1159759#post1159759
Thanks......
INTRO
I started trying to make a kitchen for our Elves based on bepe's Extended Kitchen and Elf(in) Hybrid Kitchen was "born".
Since then, bepe released his famous PlatformReBuilder(PRB) and I followed him, creating B2 Kitchen (page41 and on).
The Hybrid Kitchen is discontinued but I will keep it posted here for anyone who wants to play with it.
B2_Kitchen has started as an Elf(in) kitchen, but became a multidevice kitchen.
B2_Kitchen has started as a simple batch-file kitchen, but became a multifunctional kitchen.
At the end it is a GUI based on command-line tools just like some other visual kitchens.
The main applications are PlatformReBuilder and ImgfsTools.
So I don't actually feel that I made something new...
I take no credit!
CREDITS TO
bepe for the kitchens and other tools,
pof for the USPL, cmonex for the HSPL,
itsme , mamaich & tadzio for the brilliant but simple tools,
ervius for the great tools,
Noonski for the cooking class [This is how newbies gain the knowledge to cook] and for the inspiration,
Ababrekar for guideness in porting OS from another device,
Aman for sharing his knowledge&helping me make any fixes&upgrades
and many more members/developers of this forum which I consider as a free on line school whose tools and guides made this possible!
These kitchens are free to use or edit but at your own risk, I take no responsibility for any damage caused to your phone!
B2 Kitchen
B2 Kitchen GUI (LATEST VERSION 2.0.0.0)
Supported Devices:
Elfin
Leo
Diamond
? (Testers Needed for other devices)
INSTALLATION:
Prerequisites:
Microsoft .NET Framework 3.5 (Windows Vista / Windows 7 have it pre-installed)
If you're using Windows Vista / Windows 7, make sure USER ACCESS CONTROL is turned OFF!
DO NOT change the structure of the kitchen!
If you don't want to use ImDisk Driver, you should get another 3rd party software able to create a RamDisk in order to use the relevant feature.
Installation:
Once you download the kitchen, install it following on screen instructions.
When you launch the kitchen for first time you'll get the chance to install ImDisk Driver if it isn't already installed.
(RECOMMENDED if you don't have another 3rd party software for Virtual Drive Management)
To get started, you should import a device by using an official_shipped_ruu.exe as a source.
Otherwise you could place your files manually.
(Be careful to put them in the correct way, respecting the kitchen's structure)
Download links:
Mediafire(For ALL users)
XDA(For XDA members)
********************************************************************************************************************
DESCRIPTION:(Video)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Dump any source you want in almost any known format:
RUU_Device_HTC_Version_Signed_Ship.exe
RUU_Signed.nbh
Flash.dio
OS.nbf
OS.nb.payload
OS.nb
nk.fat
Imgfs.bin
xip.bin
Part01.raw and Part02.raw
Import a new device by dumping the device's OFFICIAL Rom RUU_Device_HTC_Version_Signed_Ship.exe.
The kitchen will even create a CustomRUU.exe AND a Task29.exe for the imported device.
Import any new leaked build just with one click.
When you dump a rom / import a new device the kitchen is able to:
Remove any empty packages if you select -EmptyPkgs.
Sort each registry file from your dump to make it more readable if you select SortRegistry.
Sort all Packages into the required style.
Sort all manila localization files by lcid.
Build your rom according to your taste:
Set which packages will be included from the "Packages Selection" area.
Set Rom version, language, ModelID and CountryID that are required for generating the final flashable *.nbh. The Rom date will always be automatically set to current date.
Select among various builds and lcids which one to use for building your Rom.
Select whether to use a real 6.5 nk (if your device has a 6.5 nk) or not in your generated Rom by selecting 6.5nk.
Select whether to use ShaDrac's driver - Extendir - or not by selecting Extendir, without messing up (adding/removing Extendir.dll - editing boot.rgu) your XIP each time.
Select whether to reduce/remove ULDR or not at your generated Rom by selecting -uldr.
Select whether to increase the Storage Memory of your Rom or not by selecting -imgstart.
Choose your Rom's PagePool Size (0-20).
Select compression (XPR-LZX-None) method for building your Rom.
Add Radio and Splashscreen to your final flashable *.nbh.
Set the kitchen to take care the "SLOT 0 overfloating" issue when building a 6.5 Rom while your nk.exe is not a real 6.5 nk.exe by selecting Rec.Mod SYS
If you have used the above option and have recmodded some modules inside SYS/Shared in order to fix the "SLOT 0 overfloating" issue when no real 6.5 nk.exe is available, but now you want to use the same Build (= the same SYS/Shared) for building a new Rom for a device that has a real 6.5 nk.exe you can reversmode the same files by selecting Rev.Mod SYS.
Set the kitchen to search and find any duplicate items in your compilation that would cause crashing issues to PRB before starting the real building process by selecting DuplicateCheck.
Each time you build a rom a log file is created which you can easily see by clicking the "Process" Label.
Search for files or file's content (i.e. Search for a certain registry entry among *.reg files) using the search engine of the kitchen.
Access fast and easy certain files that are commonly used inside a Rom.
You can see lists of *.txt, *.mscr , *.xml , *.provxml , *.cpr & *_manila inside your kitchen by simply clicking the relevant button.
If you click on any file you see in those lists you open it for editing.
Flash any ROM you selected from a list of your created Roms to your device.
You'll get the chance to perform task29 on your PDA - THEN manualy enter Bootloader and FINALLY update the ROM if you have that special CustomRUU inside the kitchen.
Use a RamDisk (ImDisk Driver comes with this kitchen) for the building and dumping processes in order to gain speed and decrease hard disk fragmentation.
Cfc manila files and convert any normal Manila_package to a compressed one just with one click.
Exploit the possibilities of MortScript even during building your Rom:
Forget about app.dat - app.mscr is introduced in this kitchen.
Don't cook in hundreds of files that get copied to various locations but at the same time stay in your "Windows" directory slowing down your device - Create just one archive (app.xdaz) which extracts the files to the correct locations during boot leaving in "Windows" directory only one file with an unknown extension.
Convert cabs--->EXT Packages just with one drag n' drop on a button.
Convert files<-->modules just with one drag n' drop on a button.
Convert rgu files<-->hives just with one drag n' drop on a button.
Convert provxml files<-->reg files just with one drag n' drop on a button.
Convert bmp<-->nb just with one drag n' drop on a button.
Install any cab file to your pda just with one drag n' drop on a button.
Manipulate each package from the "Packages Selection" area just with one click:
Double click on the package to open its folder
Right click on the package to:
Edit directly the package's app.reg.
Edit directly the package's app.dat.
Edit directly the package's app.mscr.
UPX one/all package's executable(s).
Optimize package's png(s).
Optimize package's bmp(s).
Repack package's *.mui files.
Recmod one/all package's module(s).
NosplitMod one/all package's module(s).
Revmod one/all package's file(s).
Install the package to your pda.
Edit directly the initflashfiles.dat of the selected language just by right clicking inside the "Locale" box in the "Configuration" area.
Edit directly the boot.rgu of the selected build just by right clicking inside the "Build" box in the "Configuration" area.
If you want to edit directly the boot.rgu for the Extendir driver just right click the Extendir checkbox.
Read/Write directly the packages.cif and packages.sof of the selected build just by right clicking inside the "Build" box in the "Configuration" area.
Optimize XIP & SYS of the selected build just by right clicking inside the "build" box.
Build 3 different editions of your rom just by selecting an "Edition" (Premium, Basic, Lite) in the "Configuration" area.
This is optional, so if you leave "Edition" blank, then the "P" , "B" , "L" selection in the "Packages Selection" area doesn't matter!
Keep the kitchen accessible at all time. When you close the kitchen, it minimizes to tray from where you can access many functions and browse the kitchen's folders. By double clicking the tray icon you restore the kitchen's window.
If you want to really exit the kitchen while it is visible press F1!
Easily uninstall the kitchen from your system.
Easily save/load your project:
If you double click the "Save" icon then you'll save your current project (its name will be the Edition.build.locale.date&time of saving).
If you click the "Save" icon then you can select from a list of your projects which one to load.
Easily access all the tools that come with the kitchen. Even assign your own favorites to ALL the bottom buttons.
Check existing registry files for errors before building your Rom by right clicking the "Packages Selection" Label.
The time of this operation depends from the number of registry files, so you either give it enough time to finish if you have a lot of packages in your compilation or you click the Stop button to abort it.
Control your pda from inside the kitchen:
Restart your connected pda without even touching it.
Enter BootLoader.
Watch a list of processes currently running on your device.
View/edit/dump your device's registry.
********************************************************************************************************************
BASIC USAGE:
***Valid for any device - Just consider your device's name instead of the Elfin***
Packages Selection:
You can see all the SYS Packages from the BUILD & LOCALE you've chosen.
You can see all the EXT Packages you have in the kitchen's directories.
You can make sub-directories(limitation:up to 16!) to organize them better(i.e. EXT\Elfin\Tweaks , EXT\Elfin\TodayItems , EXT\Elfin\Apps , EXT\Elfin\Utilities , etc) and place your packages inside each sub-directory.
You can select which packages to include in your ROM by ticking the checkbox in front of the package's name. If you have it unticked then the package will be skipped.
If you double click inside the selection cell but not on the checkbox then you can select/deselect ALL packages.
You can see in the "Packages Selection" area that there are 3 columns "P" , "B" , "L" following the Package's name.
These will have an effect ONLY IF you select an Edition under "Configuration" area!
Code:
If you want "Package1" to be [COLOR="YellowGreen"]included[/COLOR]/[COLOR="Red"]excluded[/COLOR] in your [B]P[/B]remium edition then you must have the checkbox under "[B]P[/B]" [COLOR="YellowGreen"]ticked[/COLOR]/[COLOR="Red"]unticked[/COLOR].
If you want "Package1" to be [COLOR="YellowGreen"]included[/COLOR]/[COLOR="Red"]excluded[/COLOR] in your [B]B[/B]asic edition then you must have the checkbox under "[B]B[/B]" [COLOR="YellowGreen"]ticked[/COLOR]/[COLOR="Red"]unticked[/COLOR].
If you want "Package1" to be [COLOR="YellowGreen"]included[/COLOR]/[COLOR="Red"]excluded[/COLOR] in your [B]L[/B]ite edition then you must have the checkbox under "[B]L[/B]" [COLOR="YellowGreen"]ticked[/COLOR]/[COLOR="Red"]unticked[/COLOR].
There is also a ZIP Column. That Column is used to "mark" which EXT Packages you wish to convert to "Mscr_Packages" when you click "ExtToMscr" option.
Code:
If checkbox = unticked then nothing will change.
If checkbox = ticked then Selected Package will be converted to a Mscr Package (this is useful ONLY for applications that get installed to Program Files)
If checkbox = greyed then Selected Package will be converted to an Extendir Package (this is useful ONLY for applications that get installed to Windows and you're cooking Extendir in your Rom)
When you click the "ExtToMscr" the kitchen creates an archive (with the extension *.xdaz) from the Package's files and writes the necessary "app.mscr" (something like the equivalent of "app.dat").
For this it needs the "app.dat" inside the EXT Package so that it translates it to "app.mscr".
(This operation doesn't take place each time you hit the build button)
Your (original) EXT Packages will be copied to TOOLS\pkg\EXT.bak as a backup and only the (converted) Mscr Packages will be kept inside EXT[folder].
These new packages will be used ONLY IF you select "mscr" for ARType( = AutoRun Type) in the "Configuration" area.
Of course MortScript MUST be included in your Rom AND you must have the ARMS.mscr (script with #INSERTLINE switch) inside Autorun.mscr\Elfin folder.
Click to expand...
Click to collapse
Main Functions:
Obligatory routine:
Select device.
Select build.
Select locale.
Clicking the "Dump" button presupposes that you have placed a Rom file inside BaseROM folder.
When the process finishes you'll get a full dump of that Rom.
Drag n' drop a Rom file on this button works the same way!
Right Click on "Dump" button will show you two options:
Import New Device
meaning use another device's official rom to dump&prepare everything that is required by the kitchen to operate.
When everything is completed you'll be asked whether to auto move files or not!
Import New Build
meaning use any archive with the new leaked build to import the included SYS and XIP packages to the kitchen.
Next to the "Dump" button is 1 icon :
The folder-icon is a menu that includes shortcuts to various kitchen's folders.
Clicking the "Build" button starts the building process.
Next to the "Build" button are 3 icons :
The first one is a menu that includes :
ImDiskGui
ExtToMscr
RomTools
RePackOEM
CFCManila
The second one opens the below window. From there you can turn on/off the RamDisk feature, uninstall the kitchen, set your custom (build) commands, etc.!
The third one opens the Search utility of the kitchen.
Clicking the "Stop" button you stop the process you've started.
Clicking the "Phone-icon" button you have the options to:
Select from a list with your created Roms which rom to flash.
Restart your connected pda without even touching it.
Enter BootLoader.
Watch a list of processes currently running on your device.
Launch CeRegEdit
Double clicking the "Phone-icon" button you access the RELEASE\Elfin folder.
Clicking the "Flash" button you minimize the kitchen and start the CustomRUU (ElfinCustomRUU) in order to flash the ROM you selected to your device.
Right Click on "Flash" button will show you the option to Format&Flash, meaning that you'll get the chance to FIRST perform task29 on your PDA (ElfinTask29) - THEN manualy enter Bootloader and FINALLY update the ROM.
Right Click on "Configuration" label will show you the Advanced PRB Settings panel.
Clicking on "Radio" label opens the radio sub-folder.
Clicking on "Splash" label opens the splash sub-folder.
Addons:
You can easily access all the extra tools that come with the kitchen. - Drag n' Drop works for every dark-GRAY button.
You can assign your favorite links to ALL the buttons you see at the bottom!
Those links can be applications, folders, batch files or urls.
In order to set your own you should edit the file myaddons.ini under TOOLS\addons\ keeping the format addon#|Name|Path :
(Just right click on the button you want to change)
Code:
addon1|CFF Explorer|C:\Program Files (x86)\Explorer Suite\CFF Explorer.exe
addon2|Tiny Hexer|C:\Program Files (x86)\mirkes.de\Tiny Hexer\mpth.exe
addon3|Icon Editor|C:\Program Files (x86)\Icon Editor\IcoFX.exe
addon4|Manila Kitchen|C:\Program Files (x86)\Manila_Kitchen
.
.
.
********************************************************************************************************************
TO DO:
Any suggestions are welcomed!
Any bug reports are appreciated!
B2 Kitchen's Structure
This is the structure of the kitchen after importing a device and you shouldn't try to change it because you will have errors!
The build 23545 you'll see in the below pictures is an example in order to help you understand the kitchen's structure.
Autorun.mscr is the folder where you can put your mortscript file that runs at first boot(named ARMS.mscr).
This mscr must include a line "#INSERTPOINT" !!! This line is required so that all "app.mscr" will be added at that exact point of your script!
The ARMS.mscr must be placed inside the subfolder named after your device.
BaseRom is the folder where you can put any rom you want to dump.
EXT is the folder where you store all your EXT Packages that you want to try in your ROM.
Here you can put any application,utility,todayitem,etc. and choose whether to include it or not, having in mind if it is or not essential for the windows to work!
Those Packages must be placed inside the subfolder named after your device.
OEM is the folder where you have OEMApps, OEMDrivers and other OEMFolders (Device Specific). Check out trueg's posts for more information about these folders.
Those OEMFolders must be placed inside the subfolder named after your device.
If you are cooking a rom in a different language than WWE, then create that subfolder.
For example if I want to cook a greek rom I'll create a subfolder 0408 along with 0409 and place my local.files in 0408.
If you are using the kitchen in OEM mode you can put inside the "Pkgs" subfolder your old-style packages (with *.dsm , *.rgu , etc.). You'll be able to choose whether to include or not each of those from the kitchen's packages selection!
RELEASE is the folder where your custom ROM (i.e.Yourdevice_ROM_Lang_0409_Build_21056.nbh) will be placed after cooking in order to flash it to your device using your CustomRUU.
You must have a subfolder named after your device under RELEASE and be careful with the names of the included *.exes (YourdeviceCustomRUU.exe & Task29\YourdeviceTask29.exe).
ROM is the folder where the XIP is placed.
If you enter this folder you'll see :
Like it is shown above, you must have all the XIP elements, except MSXIPKernel, inside the subfolder named after your device.
If your device has WinCENLS_Lang_0*** as part of XIP leave it there, otherwise an adviced location to store it is OEM\Yourdevice\0***\.
SYS is the folder where all the OS Packages (Not device Specific , but I'd say Screen Resolution Specific) are stored categorized by build number. Check out trueg's and Da_G's posts for more information about these Packages.
You must place those OS Packages inside the subfolders SHARED, dpi_96 , dpi_96_resh_240_resv_320 , etc. like it is shown below.
TOOLS is obviously the kitchen's "engine".
(Each time you build a rom you should find in there a log file from the building process which you can access by clicking on the Process label of the main application)
Inside CORE\Saved folder you must have a subfolder named after your device.
Inside CORE\Devices.list(file) you must have the settings for your device.
$DEV=YourDevice'sName
<1 for device that has only wm6.1kernel , 2 for device that has wm6.1kernel AND wm6.5kernel , 3 for device that has only wm6.5kernel>
KERNEL=3
dpi=192
resh=480
resv=800
ModelID=PB8110000
CID=11111111
chunksize=64
GSMHeaderType=0x301
<" -s" Switch if device's Splash.nb requires smartphone signature , leave blank if device's Splash.nb DOESN'T require smartphone signature>
SplashSwitch=
SplashHeaderType=0x600
<Size of device's Splash.nb>
SplashSize=786432
<" -t 0" for 0x00 or " -t 255" for 0xFF>
SplashPaddingType= -t 255
OSHeaderType=0x400
<hermes for Sectorsize=0x208 , kaiser for Sectorsize=0x808 , titan for Sectorsize=0x800 , leave blank for Sectorsize=0x200>
NBMerge=kaiser
<reduce for device that ULDR can ONLY be reduced , remove for device that ULDR can be totaly removed>
ULDR=reduce
Click to expand...
Click to collapse
Inside Radios folder (see below) you can store any %radio%_0x30$.nb in order to use in your Rom:
You must place those Radios inside the subfolder named after your device.
You can find all Elf(in) Radios here.
Inside splash folder (see below) you can store any
%##splash%_0x60$.nb in order to use in your Rom.
%##splash%_0x60$.bmp is required for previewing!
You must place those Splashscreens inside the subfolder named after your device.
You can find more SplashScreens here or you could make your own with the kitchen tools.
B2_Kitchen_GUI is the GUI that combines all the command line tools. Screenshots here.
Elfin Hybrid Kitchen
ELF(in) Hybrid Kitchen (DISCONTINUED - NEWER KITCHEN @ 2nd POST)
INSTALLATION:
1. Install on your pc Microsoft Visual C++ 2008 Redistributable Package and Microsoft .NET Framework 3.5!
2. Remove any previous version(if any)of the kitchen(shortcuts too) before "installing" the newer!
3. The archive should be extracted directly to the Drive where Windows are installed (most cases C:\) , otherwise nothing will work!
4. Once you do that, go into C:\ELF(in)_Hybrid_Kitchen and double-click "First_Run_For_ELF(in)_Hybrid_Kitchen.bat"!
5. IF you're using Windows Vista, make sure USER ACCESS CONTROL is turned OFF!
Download through: Mediafire
********************************************************************************************************************
DESCRIPTION:
(Be patient and keep your eyes on the DOS window for additional help&instructions while using this kitchen)
Main Functions:
[a] Dump any ROM from Kaiser, Polaris, Diamond, Xperia, Raphael, Elf(in)...
You may use these formats:
****.nbh (eg: RUU_Signed.nbh, Blue_Elves.nbh, etc) ,
****OS.nb (eg: New-OS.nb, 19588-OS.nb, etc) or ***windows.nb (eg:Mobile_windows.nb, New_windows.nb, etc) ,
****imgfs.bin (eg: imgfs.bin, new_imgfs.bin, etc) .
****.payload (eg: OS.nb.payload, 20270_OS.nb.payload, etc) . <- NOT FOR ELF(in) !
****.raw(only Part01.raw & Part02.raw) .
You get new OEM, SYS and xip.bin(unless you used *imgfs.bin) into C:\ELF(in)_Hybrid_Kitchen\Extract_ROM\Temp .
If you used an ELF(in) ROM then you'll get a full dump, OEM, SYS and XIP, that you could move to C:\ELF(in)_Hybrid_Kitchen\ELFIN_DEV_v2.1_Build_19XXX\ and use it as a cooking base .
[b] Port any XIP from Kaiser, Polaris, Diamond, Xperia... You need xip.bin .
It requires:
NOT to change Ref_XIP folder inside C:\ELF(in)_Hybrid_Kitchen\Prepare_XIP and
If you have any problems in XIP Porting you have all the needed tools inside C:\ELF(in)_Hybrid_Kitchen\Prepare_XIP to try manually port the xip .
[c] Build your OS.nb (using the Ervius PkgToolsBuildos which can autofix & autorelocate SYS) .
You'll get the option to make a dumpable ROM using PkgToolsBuildos (by keeping unticked the box next to "All packages in one:") .
NOTE1: Inside ..\Build_ROM the OEM , SYS and ROM\XIP folders are empty . You may "fill" them with the required files .
NOTE2: Because Ervius PkgToolsBuildos is included in the kitchen, you could always use the functions that it provides apart from those described here .
NOTE3: If your xip_out.bin or out.bin is smaller than 2,49MB you could use the attached os.nb.payload (where imgfs start @ 0x280000)
[d] Flash any ROM to your device .
If you have a CID Locked device you have the option to flash a ROM using SoftSPL & your device remains CID Locked with the same SPL !
Additional Functions:
[1] Convert any cab to an OEM Package using Ervius Package Creator .
[2] Create a cab using IABovine's QuickCab 2.0 .
[3] Convert a bitmap to a Splash.nb (& reverse) using pof's nbimg .
[4] Convert files to modules & reverse using RecMod and reversmode . Not all files can be converted to modules.
[5] Convert 24 bit .bmp to .brn and reverse (for editing Cube gfx) .
[6] Compress executable files using UPX 3.03 .
Panel:
Easy access for many tools .
BASIC USAGE:
(Check out ayyu3m's great [PICTORIAL] COOKING YOUR 6.1 ROMS USING ELF(in) HYBRID KITCHEN)
1. Lets say you want to use a SHIPPED or DUMPED (NOT a COOKED!) ELF(IN) ROM as a Base.
--1.1.Double click the desktop-shortcut "Main Menu"
--1.2.Press [a]
--1.3.A window pops up beside the DOS screen. Place in there the RUU_Signed.nbh and close the window!
--1.4.Press [1]
--1.5.When the process is completed (& pressing any key returns you to main menu), you get another window opened with the files you want:
Packages(OEM&SYS)
XIP(folder)
xip.bin
--1.6.Keep that window open and double click the desktop-shortcut "Kitchen"
--1.7.Copy OEM and SYS to C:\ELF(in)_Hybrid_Kitchen\Build_ROM\
--1.8.Copy the XIP(folder) to C:\ELF(in)_Hybrid_Kitchen\Build_ROM\ROM\
2. The Base for cooking your ROM is set! Either clean up the OEM folder from things you wish to be removed or just (re)build the ROM.
--2.1.Double click the desktop-shortcut "Main Menu" (if you closed the main menu window)
--2.2.Press [c]
--2.3.PkgToolsBuildos starts
--2.4.Go to BuildOS Tab and click Load Rom.Select which Packages to include and press the green play button[Go]
--2.5.When this process is completed you'll have your OS.nb inside the "temp" folder and the (final product) RUU_Signed.nbh is generated in two places,
(i)..\CustomRUU\ <= For flashing CID Unlocked phones
&
(ii)..\RUU\ <= For flashing CID Locked phones using SoftSPL
NOTES:
A) Ref_XIP folder inside Prepare_XIP is the latest 3.10ROM's XIP, but modified as follows:
-removed modules:
cachefilt.dll, hd.dll, mencfilt.dll, osaxst0.dll
-removed files:
boot_ms.rgu, bmui.nb0
-edited files:
boot.hv, boot.rgu,
Code:
REMOVED ENTRIES:
[HKEY_LOCAL_MACHINE\System\StorageManager\FATFS\Filters\CacheFilt]
"Dll"="CacheFilt.dll"
"Order"=dword:2
[-HKEY_LOCAL_MACHINE\System\StorageManager\FATFS\Filters\CacheFilt]
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\LSOMACORE]
"Index"=dword:00000001
"Prefix"="DRM"
"Dll"="lsomacore.dll"
[HKEY_LOCAL_MACHINE\System\StorageManager\Filters\LsFilter]
"Order"=dword:00000001
"Dll"="LSFILTER.dll"
[HKEY_LOCAL_MACHINE\Init]
"Launch98"="TimeWizard.exe"
-edited modules:
nk.exe
Code:
RTC is enabled
-ALL MSXIPKernel modules are relocated to achieve better XIPPorting
**If you include LockStreamDRM PACKAGE in your ROM and you use the Ref_XIP as your \ROM\XIP(folder), ADD the removed (from boot.rgu) entries
Code:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\LSOMACORE]
"Index"=dword:00000001
"Prefix"="DRM"
"Dll"="lsomacore.dll"
[HKEY_LOCAL_MACHINE\System\StorageManager\Filters\LsFilter]
"Order"=dword:00000001
"Dll"="LSFILTER.dll"
[HKEY_LOCAL_MACHINE\Init]
"Launch98"="TimeWizard.exe"
in the PACKAGE's *.rgu.
B) Building your ROM
When you are building your ROM you need:
ROM\XIP(ALL FILES and MODULES) ,
ROM\romhdr.bin and
ROM\OS.nb.payload
This option builds the out.bin(buildxip.exe is used)from the XIP(folder).
C) PP Patching is included in the kitchen operation!
You just set your favorite pp size at the beginning(installing) and each Rom you build is already patched!
If you make the following hex change in nk.exe's S000
Aman said:
i've another method for u guys to change the PP. search the 03 15 A0 03 02 15 A0 13 00 10 83 E5 62 C2 FF EB in yours S000 of nk.exe and change the string marked in Red color to 00 00 A0 E1. from there onwards u can simply use the old Multi-platform PP changer.exe (that is also found in kaiser kitchen) to change ur PP on the OS.nb. this should make the kitchen even simpler
PS: this method works regardless of the device
Click to expand...
Click to collapse
then the kitchen's PP Patching doesn't work!
You should use the suggested by Aman Multi-platform PP changer v2.21 which is included in the kitchen's panel!
NOTE: I don't have an ELF to test, but after the above change then I think that the pp size is the same for both ELF&ELFIN(not dynamic).
Nice job Kokotas.
great job bro
i would like to test ur kitchen.
Repository:
ElfinCustomRUU.exe
ElfinTask29.exe
Task29&CustomRUU
B2_Kitchen_GUI_Setup
B2_Kitchen_GUI.exe
kokotas said:
Thanks man, but it will be great only if it works for everybody!
I'll pm you the password for the download link.
Regards!
Click to expand...
Click to collapse
TOGETHER we all can MAKE SURE that it works for everybody
how can I obtain pass? I will translate ebglish rom to Turkish and I need that tool..
Nice work.
Not going to switch right away at the moment.
But this looks very good.
I'm on the lookout for a cheep Touch so this will come in handy if I get my hands on a touch....
gullum said:
I'm on the lookout for a cheep Touch so this will come in handy if I get my hands on a touch....
Click to expand...
Click to collapse
gullum I have touch and I can't wait to cook a new room for touch
ill have a go i got a rom on my phone that that is needed in the upgrade rom list but i have been able to remove it
Project for work
i need to lock down some features of my works PDAs and would love to try your kitchen to attempt this.
can i have a password?
Got a Touch tonight for under 200$ used of cause so now I want a kitchen to make roms
kokotas said:
Sit taken
Click to expand...
Click to collapse
Well deserved!
Gr8 job, Ill keep an eye.
This is fantastic and I'd like to try it. I'd like to cook my rom using this kitchen. Would you pls. give me a password.
Removed password protection!The download link is open for everyone!
Read 1st post before starting to play with it!Get used to it and read carefully!
Some features are NOT tested yet!
Hope to hear some good news!
Even better...hope to hear that someone makes it better!
I'm done!Back to my readings and to Solid State Physics(I hate that lesson)
Best Regards!
This is on it's way to my pc now thanks in advance
I've already changed Bepe's kitchen to fit my cooking but this one seams more advanced so thanks again
kokotas said:
Removed password protection!The download link is open for everyone!
Read 1st post before starting to play with it!Get used to it and read carefully!
Some features are NOT tested yet!
Hope to hear some good news!
Even better...hope to hear that someone makes it better!
I'm done!Back to my readings and to Solid State Physics(I hate that lesson)
Best Regards!
Click to expand...
Click to collapse
u need to modify the Create_ROM_for_ELF.bat file used for Ervius' buildOS tool. its not working right now, pls check it
CREDIT GOES TO anichillus for his Tutorial and kitchen. I just modified the tutorial with some pics and steps. Thanks to its right, S.V.I, CRACING and kitchen tools developers. Hope it helps…
Note: I wrote this tutorial on my Blog too. So consider this post as a copy of that post. Plz let me know if i have mistake in the tutorial. Thanks....
1. Some ROMS are password protected. So those ROMS will not dump.
At First you need to download a good Kitchen and a good ROM for windows mobile. All the kitchens are good. For me HyperCore Kitchen is the best choice so download the kitchen from here :
Kitchen source: HyperCore Kitchen
Latest Kitchen Download: Download
You can Use this kitchen for Wizard, Hermes, Artemis, Herald, Universal, Trinity and Prophet. Then Download a Rom for your device. You can find a lots of coustomized ROM for windowsmoble devices on Xda Developers. Before Downloading a windows Mobile Rom you need to know what kind of Windows Mobile Device you Have . And You need a CID Unlocked Device. I know that my MDA is a Wizard and it’s a G3 Device. To know about your device please read Smartphone / PDA Nick Names And Unlocking. I added some Unlocking tools source for different Device. After downloading and Unlocking Your Device You can update your Rom. To coustomize your downloaded ROM follow this steps:
1. Extract The kitchen to your C: Drive otherwise it will not work properly. It should be C:\Core\ on you PC. First of all you need to edit the file named “Device.txt” located on the “C:\Core\ACK\” folder located on systemdrive. You will see set device= . If you have a Wizard then edit the test like this set device=Wizard. Then Go to your downloaded rom directory ans copy the nk.nbf or the .nbf file to Desktop\HyperCore\Panel\Extract\source Folder. Make sure that .nbf file is named as nk.nbf.
Take a look at the bottom picture :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2. The Navigate to Desktop\HyperCore\Panel\Extract folder and Start DumpRom and hit Enter to Dump / Extract the ROM from nk.nbf file. You will see its working.. After few seconds..minutes, depending on your PC and the ROM you are extracting you will be prompted with a Status and with some questions. Here you can start PKG Tool and you can move the OS.nb to ROM folder. Type In 2 and hit Enter to copy Os.nb. Now Type in 1 and hit [ENTER] to start Package Tool. Read the window and Hit [ENTER] to countinue…
Bulding Packages
3. You will see some options On the status window. Choose Number 3 manual Option. So type in 3 and hit [ENTER].. Package tool will start. Click on Package tool and go to file > Open then select the folder Desktop\HyperCore\Extract\dump. It will show you Rom Information. After that click on Tools > Build Packages on the package Tool program. It will take some time to bulid the package. It will show you some status afet building packages.Look for [Missing Files] to find info about their Directory. To copy the missing file go to Desktop\HyperCore\Extract\dump directory and Copy the missing files / folders from there to where it shows. After you placed all files where they should be, you must then rename the “dump” folder into “Packages” and only then you can exit the PackageTool. . When you will do that, the batch program will get you to another Status window. Here you can see “Move SYS and OEM to Kitchen. So, select “4” and press [ENTER] but be sure that you renamed the “Dump” folder first into “Packages”. Then type Y and press [ENTER] again. It will move the SYS and OEM folders into HyperCore \Build for later building. Then Exit or Press [ENTER] to Exit the status window.
Dumping XIP from ROM
4. The Only thing you miss now is the XIP section and you’ll have your first OEM and SYS Kitchen after dumping the XIP from the ROM. Go to Desktop \HyperCore\Panel\Extract and start DUMP XIP it will open a folder asking you to place OS.nb on that folder. We already moved the OS.nb to this folder. So Close that folder and hit [ENTER]. This will work to generate the XIP. Read the status window and continue. Type in 1 and press [ENTER] to move the XIP. Press any key to continue and Exit the Status window.
BuilDing ROM from Kitchen
5. If you are on this step, you made your own first kitchen for your windows mobile device. Before building any windows mobile rom you must remember that your ROM size should be 56.9 MB. Now go to Desktop \HyperCore\Build and add / delete your OEM Pcakages from OEM Folder. If you want to know about how to make OEM package for Windows Mobile please read details about Making Windows Mobile OEM Here. Add remove packages from OEM and SYS folder to adjust the nk.nbf size. After adding an deleting packages go to Desktop\HyperCore\Panel\Build and start BuildOS. Look at the picture below to see this status window.
6. This will prompt you with couple of choices. It’s pretty easy. Select “1” and this will start the actual BuildOS program. Select the Packages from there and click on little green arrow and wait until finish. Note that, If you have duplicate file on the packages you will get error message saying file exist.. delete duplicate files from SYS and OEM then click on green button again. When done close the build os on the status window to make OS.nb file by choosing option 2. Type in 2 and press [ENTER] to create OS.nb file.
7. After finishing you will see the status window again. Now type in 3 and it will start nb2nbf tool. Now follow this instruction carefully.
Select Wizard on model ID field.
Then select File#1 and browse Os.nb file from Desktop \ HyperCore \Tools\Convert\ .
Then select OS from drop down list.
Click on Start Address field to get the Start address.
Click on Translate to buld nk.nbf file. Here is a picture of nb2nbf tool with this steps .
how to remove programs from sys folder
i want to remove some applications from the sys folder (like bluetooth ftp,ps shutxp) which i never use.can i simply delete the folder from sys or i have to edit rgu or initflash or dsm file .or anyone knows how to edit xml file so that i can select or deslect program from the buildos tool.thanks in advance
confident said:
i want to remove some applications from the sys folder (like bluetooth ftp,ps shutxp) which i never use.can i simply delete the folder from sys or i have to edit rgu or initflash or dsm file .or anyone knows how to edit xml file so that i can select or deslect program from the buildos tool.thanks in advance
Click to expand...
Click to collapse
Deleting the folders worked fine for me.
Which dose the samsung onima go under?
Wizard, Hermes, Artemis, Herald, Universal, Trinity or Prophet?
thanks
Hello,
MoonBlazer said:
Wizard, Hermes, Artemis, Herald, Universal, Trinity or Prophet?
thanks
Click to expand...
Click to collapse
No, hypercore or any kitchen found in this website will not work for samsung onima and also the device is not developed by HTC so you might not get any info in this website for cooking ROM's for samsung onima.
SO DO NOT TAKE ANY RISK.
confident said:
i want to remove some applications from the sys folder (like bluetooth ftp,ps shutxp) which i never use.can i simply delete the folder from sys or i have to edit rgu or initflash or dsm file .or anyone knows how to edit xml file so that i can select or deslect program from the buildos tool.thanks in advance
Click to expand...
Click to collapse
* If you are deleting any OEM folders which contains lnk. Simply delete the OEM and also clear the command line in the initflashfiles.dat file which relates to the lnk file inside the deleted OEM. You can ignore this one but I think it will slow down the speed of booting at the first time.
* If you are deleting any OEM folder which does not contain any lnk file then simply delete it.
* When ever you deleted the OEM, Rgu file might be the important to boot the device so confirm the keys inside the rgu and then delete the OEM.
* After build the nk.nbf, The file should be less then 56.9 MB if not its overcooked and it will defiantly crash while flashing.
* Make sure you device is flashed to hardspl before testing your cooked ROM.
I think these tips will help a little, Thanks
Best regards
thanks
CRACING said:
Hello,
No, hypercore or any kitchen found in this website will not work for samsung onima and also the device is not developed by HTC so I might not get any info in this website for cooking ROM's for samsung onima.
SO DO NOT TAKE ANY RISK.
* If you are deleting any OEM folders which contains lnk. Simply delete the OEM and also clear the command line in the initflashfiles.dat file which relates to the lnk file inside the deleted OEM. You can ignore this one but I think it will slow down the speed of booting at the first time.
* If you are deleting any OEM folder which does not contain any lnk file then simply delete it.
* When ever you deleted the OEM, Rgu file might be the important to boot the device so confirm the keys inside the rgu and then delete the OEM.
* After build the nk.nbf, The file should be less then 56.9 MB if not its overcooked and it will defiantly crash while flashing.
* Make sure you device is flashed to hardspl before testing your cooked ROM.
I think these tips will help a little, Thanks
Best regards
Click to expand...
Click to collapse
ok, thanks
Thanks Cracing.Your Touch HD is the best rom i ever used.
* Make sure you device is flashed to hardspl before testing your cooked ROM.
Click to expand...
Click to collapse
I think Hspl is only needed if you have a G4 Device!
ather90 said:
I think Hspl is only needed if you have a G4 Device!
Click to expand...
Click to collapse
O" thats right man. I was not knowing about it.
Why did the htc developerd two edition of htc wizard, I mean G3 and G4.
Regards
nada1
CRACING
ı am not spaek english soryy ı am eng. speak very little
Rom edit Video description pls
Correct English :
Can any one please make a screencast/video of the steps explained above ?
5. If you are on this step, you made your own first kitchen for your windows mobile device. Before building any windows mobile rom you must remember that your ROM size should be 57 MB. Now go to Desktop \HyperCore\Build and add / delete your OEM Pcakages from OEM Folder. If you want to know about how to make OEM package for Windows Mobile please read details about Making Windows Mobile OEM Here. Add remove packages from OEM and SYS folder to adjust the nk.nbf size. After adding an deleting packages go to Desktop\HyperCore\Panel\Build and start BuildOS. Look at the picture below to see this status window.
Can any one please make a screencast/video of the steps explained above ?
ferfecir said:
5. If you are on this step, you made your own first kitchen for your windows mobile device. Before building any windows mobile rom you must remember that your ROM size should be 57 MB. Now go to Desktop \HyperCore\Build and add / delete your OEM Pcakages from OEM Folder. If you want to know about how to make OEM package for Windows Mobile please read details about Making Windows Mobile OEM Here. Add remove packages from OEM and SYS folder to adjust the nk.nbf size. After adding an deleting packages go to Desktop\HyperCore\Panel\Build and start BuildOS. Look at the picture below to see this status window.
Can any one please make a screencast/video of the steps explained above ?
Click to expand...
Click to collapse
in this step go to Desktop \HyperCore\Build and add / delete your OEM Pcakages from OEM Folder in that directory. Create or download your OEM packages from here. Then follow the tutorial
Tried this a couple times from the beginning and I can't get past the BuildOS. Seen people have this before with other ROM's but they never post how it was fixed. It's the old "External component has thrown and exception." when it's creating initflashfiles.dat....
Any help with past experience would be much appreciated.
DurKNesS said:
Tried this a couple times from the beginning and I can't get past the BuildOS. Seen people have this before with other ROM's but they never post how it was fixed. It's the old "External component has thrown and exception." when it's creating initflashfiles.dat....
Any help with past experience would be much appreciated.
Click to expand...
Click to collapse
Please explain more. I will try my best to fix your problem.
Thanks CRACING,
I think it has everything to do with I don't know what i'm doing...lol
I have a lot of respect for all of the peeps cooking roms for us. Don't even know where to start when I'm looking at the sys folder. Thanks for offering to help but I'm staying far away from trying to cook a rom to my liking.
DurKNesS said:
Thanks CRACING,
I think it has everything to do with I don't know what i'm doing...lol
I have a lot of respect for all of the peeps cooking roms for us. Don't even know where to start when I'm looking at the sys folder. Thanks for offering to help but I'm staying far away from trying to cook a rom to my liking.
Click to expand...
Click to collapse
Only few weeks ago I was also not in knowing how to cook. I readed may posts and threads on this website but did not went in head. So after many studies and hard works day/night, Now I am able to cooking the ROM's for the wizard. Everyone think that cooking is not so easy but after learning, we can cook ROM's easily.
Now I am insearch in cooking ROM's for HTC Touch HD but the only problem for me is that, I have do not have device to test.
Anyway, Do some research in this good website. You will get many guides for cooking ROM's and threads/post for fixing problems.
Best regards
the path
Desktop\HyperCore\Panel\Extract\source
is on new version not correctly the path are
\Desktop\HyperCore\Extract\Source
gabberjool said:
the path
Desktop\HyperCore\Panel\Extract\source
is on new version not correctly the path are
\Desktop\HyperCore\Extract\Source
Click to expand...
Click to collapse
But mine shows.. Desktop\HyperCore\Panel\Extract\source i am confused
delete your OEM Pcakages
Can any one please make a screencast/video of the steps explained above !
Touch 3G - Jade
Hi,
Can I use this tutorial to create a Rom for my Jade ,or Touch 3 G.Please note that I am not a computer geek.
Regards,
Thomas
Hello everybody!
It's finally there: Windows Mobile 6.5 for the Samsung GT-C6625 Valencia (English)!
- This is the FIRST English Installation Guide translated and made by myself (Thekn)!
- This is also the FIRST WM 6.5 English Development Thread!
There are four versions:
WM 6.5: 21745, 21854, 23017, 28004
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
--------------------------------------------------------------------------------------
WM 6.5 Release Notes (this is just a google translation)
1. Integrated Plum Input, Phonetic Search, and IP Dialing
2. 12 M Microsoft Elegant Black Font
3. Quick List add Restart option
4. Integrated SIM Card Manager, Notepad 3.2, Title Bar Clock, Unit
Converter, JAVA, Resco Explorer 2007 (unregistered) and Registry Editing
software
5. Registry optimization, Integrated, and Delicacy Theme Titanium
6. GPS testing will no longer use this forum to provide the finished version
of the users, reduced to English
7. The hook warning tone provided by other Forum users should compare
the current compromise solution
8. Retention MSN and Windows Lives
9. Streamlining some of the English version of the software and the color
and theme unused
10. In addition to 28,004 outside the WM6.5 ROM version 6.5 are integrated
color Menu
------------
Part of the version of the Source SYS
1. 21745 official 6.5 from I637
2. 21854 from HTC's snap
3. 23017 and 28004 from the network, specific unknown
4. 20758 from the original English rom C6625
--------------------------------------------------------------------------------------
All credits go to the C6625 Forum at www.zn520.com!
http://www.zn520.com/viewthread.php?tid=2545&extra=page=1&orderby=replies
--------------------------------------------------------------------------------------
Installation Guide
FIRST OF ALL: BACKUP ALL OF YOUR DATA AND FILES, YOU CAN USE A NICE PROGRAM CALLED SPRITE BACKUP
(http://www.spritesoftware.com/products/sprite-backup/full-edition)
ALSO I AM NOT RESPONSIBLE FOR ANY DAMAGE DONE TO YOUR DEVICE BY FLASHING THIS ROM
FOR RESTORING TO THE ORIGINAL FIRMWARE LOOK DOWN AT THE RESTORING PART
Requirements:
- The RAR file
http://www.zshare.net/download/7596057276bfeb69/
http://www.megaupload.com/?d=UJA5XBCE
password: Thekn
- A Windows XP Machine (I tried it on Windows 7 but it didn't worked for me)
Installation:
- Extract the downloaded RAR file (there will be 3 maps)
- Go the the BIN Files map and choose one of the maps containing .bin files
(I think 28004 is the latest).
- Grap the .bin file you want and copy it into the ROM folder.
- Copy or Cut the ROM folder to the root of your HardDisk (C:/ROM)
- Copy the Home Patch.cab (English Patch.cab to your SD Card (on the root (SDCARD:/Home Patch.cab)
- Install the 2 Drivers in the folder DRIVERS
(there is a change that you get a warning for installing the drivers, just continue)
- Turn of your phone and plug-in the USB cable
- Now turn on your phone while pressing also the green call button
(Power + Call)
- Now you're in the Bootloader Mode (when you get a message on your pc
for installing the drivers click on NO (so don't use Windows update) and let
it search for the drivers. It will find one of the drivers in the DRIVER folder
you just downloaded and install it again.
- Then go to the ROM map (C:/ROM) and run the PDAFLASH_ActiveSyncTotal(1016).exe
- Then it will automatically download the new WM 6.5 ROM to your C6625
- When it's finished it automatically reboots
- When the startup progress is ready you will see the TouchWiz interface and it's all Chinese
- Just don't click on anything and wait for 2-3 minutes (when it doesn't restart automatically
and you noticed that the D-Pad buttons aren't working just hold on the Power button
and it will automatically restart
- When starting up you see a Vodafone logo (this doesn't mean there's a
simlock, maybe we can change it later)
- When the startup progress is ready: press the left softkey 2 times (start)
- And then choose the File Explorer icon (you'll see after the startup its Resco Explorer 2007)
- Go to the Windows folder and press and hold the right D-Pad button to scroll faster
and search for fexplorer.exe and launch it
- Now hold the HOME button (the house button under the left softkey) so the
Task Manager opens and stop the Resco Explorer 2007
- Now in the Task Manager click on the normal File Explorer icon to open it
- Go to the SD Card and install the Home Patch.cab (English Patch.cab), when it's fully installed press the
left softkey to reboot
- After this you will notice everything is English! (You can change your location in:
Setting --> Regional Settings
- Register Resco Explorer 2007 yourself
--------------------------------------------------------------------------------------
New Keyboard Input
In the Text Field:
- Press the SYM button to change to ENG
- Press and hold the SPACE BAR to activate the symbols
- Press and hold S (*) for the T9 (it's menu number 4) or without
AutoText number 5)
- For Keyboard Symbols press and hold the letter
--------------------------------------------------------------------------------------
Known problems
- Some parts of the UI are still Chinese (Maybe you can edit the Register,
let us know)
- There may be some problem with the 3G Network but i think that's only in
China. I don't have any problems (I'm from the Netherlands, Provider:
Telfort).
- You have to manually put in the GPRS settings for the Provider Internet
--------------------------------------------------------------------------------------
For restoring to the latest original Firware:
Samsung C6625: Latest Official Firmware + Official Flashing Guide by Samsung
http://forum.xda-developers.com/showthread.php?t=689423
--------------------------------------------------------------------------------------
For this nice tweak:
Visit:
Increase Screen Size using 96DPI + Menu Tweak
http://forum.xda-developers.com/showthread.php?t=680233
--------------------------------------------------------------------------------------
All credits go to the C6625 Forum at www.zn520.com!
http://www.zn520.com/viewthread.php?tid=2545&extra=page=1&orderby=replies
--------------------------------------------------------------------------------------
Happy Flashing and Cooking,
Thekn
I cook New ROM WWE, but i don't have this device
Nokser said:
I cook New ROM WWE, but i don't have this device
Click to expand...
Click to collapse
You will cook a new ROM? Or have you already cooked a ROM?
Anyway, I appreciate your help a lot! There is no Samsung Valencia ROM
development so every step is a step closer!
I know, but I must have device for testing ROM
We must think of something
Nokser said:
I know, but I must have device for testing ROM
We must think of something
Click to expand...
Click to collapse
maybe this can help?
See the attachment for link!
----------------------------------
Samsung Windows Mobile SDK 1.2.1
The Samsung Windows Mobile SDK offers APIs to use advanced features unique to Samsung phones. You might already have experience using advanced capabilities featured in the Windows Mobile APIs, like GPS, Bluetooth, or multimedia support. In addition to the Microsoft Windows Mobile APIs, you can use Samsung APIs to access phone features such as the accelerometer, notification LEDs, and haptics feedback.
Version 1.2.1 of the SDK now includes two signed CAB installers in the redist directory, one for Samsung Windows Mobile Professional devices, and one for Samsung Windows Mobile Standard devices. Please see the Installation Guide for more details.
It also includes the new features of Version 1.2.0 of the SDK (new APIs for FM Radio and dual camera functionality and support for three new phones:
the GT-C6625 Valencia,
SCH-m490/m495 T*Omnia,
and GT-I8000 Omnia II.)
The MD5 check sum for Samsung Windows Mobile SDK 1.2.1 Installer.msi is ed7b50d8f085e5df9929131340df8401
I have a notion of what it is
I create apps from this SDK, for Samsung
See this my friend:
http://innovator.samsungmobile.com/platform.main.do?platformId=2
Anyway, I'm going to bed now!
I will see your reply in the morning!
Thanks for your help!
Nokser said:
I have a notion of what it is
I create apps from this SDK, for Samsung
See this my friend:
http://innovator.samsungmobile.com/platform.main.do?platformId=2
Click to expand...
Click to collapse
haha oke, i thought it could help!
I see it, your a ROM developer!
If you need any help, your welcome!
I can test anything on my device!
Have a nice sleep.
I do not sleep too much
Always at your service
Nokser
Thekn said:
haha oke, i thought it could help!
I see it, your a ROM developer!
If you need any help, your welcome!
I can test anything on my device!
Click to expand...
Click to collapse
I think on this, but tomorrow
Tomorrow I'll do a little test, so be ready
Nokser said:
Tomorrow I'll do a little test, so be ready
Click to expand...
Click to collapse
how are you doing today?
Have you done any tests?
I build this test now
How can you give me another link to the original ROM
Nokser said:
I build this test now
How can you give me another link to the original ROM
Click to expand...
Click to collapse
what do you mean by another link to the original ROM?
I have a link in the attachment to a forum with the latest firmware C6625XXIG5!
do not want netload
Nokser said:
do not want netload
Click to expand...
Click to collapse
Netload is the only site that doesn't require a login acount.
There is another site where you can download it but you have to sign up for an acount.
http://www.mobilfunk-faq.info/en/downloads/c6625/411/samsung-c6625-firmware-c6625xxig5-3320/
Maybe I can download it and upload it on a site you like?
Thekn said:
Netload is the only site that doesn't require a login acount.
There is another site where you can download it but you have to sign up for an acount.
http://www.mobilfunk-faq.info/en/downloads/c6625/411/samsung-c6625-firmware-c6625xxig5-3320/
Maybe I can download it and upload it on a site you like?
Click to expand...
Click to collapse
Give it to me at 4share in two parts
Thanks
On the official samsung website they say :
Update to Windows Mobile 6.5 via new PC Studio.
Did somebody try ?
business(dot)samsungmobile(dot)com
it doesn't work i believe...
guidouil said:
On the official samsung website they say :
Update to Windows Mobile 6.5 via new PC Studio.
Did somebody try ?
business(dot)samsungmobile(dot)com
Click to expand...
Click to collapse
any updates nokser
Samsung B7320 custom ROM J-Revalution
from samfirmware.com :
- First check your firmware *#1234#
- Check Simlock and Network lock is OFF *#7465625#
- If you come from America don't flash!
WM 6.5.3 build 23121
DISCLAIMER :
I AM NOT RESPONSIBLE FOR ANY DAMAGE DONE TO YOUR DEVICE BY FLASHING THIS ROM
FLASHING IS ON YOUR OWN RISK
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
# V2.0 clean
Download :
http://depositfiles.com/en/files/a4h1oh3px
preview by Ososucre :
http://www.kaskus.us/showpost.php?p=337576737&postcount=1614
# V1.5
http://forum.xda-developers.com/showpost.php?p=9598479&postcount=27
# V1.0
download:
"http://www.mediafire.com/?4ky2td31509bn18"
password to extract : mr.monster
special thanx to :
# Tj_style
# Py8
# Dermann
# Sepiatie
reserved
Jreva v2.0 Premium for donations
thank you for giving donations to the development Jreva
donation givers list :
1. Lorinsion
2. Babu916
Support Programs for JR
# 96dpi
#vista wait cursor
#automatic 4 x 3 start menu icon
#dial images
#and many more
note :
install titanium panel and delicacy panel first
then uninstall start menu background
download :
96dpi v2
# new homescreen from Moto q9h forum indonesia
Wp7simple by chocolipop and added weather by mr.monster
for update weather just cek at this sites
http://www.accuweather.com/rss-center.asp
download
WP7 simple by chocolipop edited by monster
# for new icon ,save boxicontemplates images bellow
edit with your favorites picture programs, convert to ico using icofx 44x44 24 bits, give a name. copy to windows
then copy shortcut from start menu, drag and drop to notepad
example if you want to change shape of garmin XT icon
you can see in the shortcut string like this :
36#"\Storage Card\Garmin Mobile XT.exe"
than edit it to be like this :
36#"\Storage Card\Garmin Mobile XT.exe"?\Windows\Garmin.ico
save copy back to start menu and reboot
How To Flash
tutorial pdf manual flashing from samfirmwares.com
Tutorials Flashing by Monster Manual
prepare equipment
Computer and Device Driver
# Cp_driver
# Samsung cdma modem
# XP Operating system on your PC(do not use OS than xp)
>>>> Install samsung cdma modem and CP_driver,then restart your PC
flahing example by using cooked firmware v1.0 WM JR 6.5.3 (j-revalution v1.0
Figure 1
Click to expand...
Click to collapse
# the first step to prepare the equipment on a PC or lapie
1. extract the firmware files Reva WM 6.5.3.rar
2. run GT-B7320_7330_MultiDownloaderMCCI_v7.0.exe
3. click Button on the panel: phone, eboot, pda and csc and choose the file [COLOR = "Blue"] (figure 1, Circle A) [/COLOR]
4. proceed to select download mode (figure 1, Circle B)
select everything except for EFS clear
[SIZE ="4"][COLOR="Blue]# The next step In the Device (jackie)[/COLOR][/SIZE]
1. turn off your device
2. press and hold the "J" on the device
3. connect the data cable and press the power button while still holding "J" Button
4. port later in the tab will look like [COLOR="Blue"](figure 1, Circle C)[/COLOR]
5. if it is detected in the flasher tools, release the "J" button
6. Click the Start button on the flasher tools [COLOR = "Blue"](figure 1, Circle D) [/COLOR]
5. process will run as long - 3 minutes
6. flashing will complete if it appeared the picture below, the indicator at the port will be a full green.
8. let stand until reset twice jackie
9. if it has been reset a second pop up will appear phones and sim config settings, select sim config and continue with the phone set up, and the flashing process was completed.
HELLO
Awaiting your B7320 ROM updated post in here........ I need a custom ROM for my B7320, you can help me !!!
heres screen shot for my custom rom
gatutkoco said:
heres screen shot for my custom rom
Click to expand...
Click to collapse
Wowwwwwwwwwwwwww.............
Congratssssssssssssssssss,,,,,,,,,,,,,,,,,,,,,,,,,,
brother... its looking awwwwwwwwwsmmmmmmmmm
how is dis ROM ???
did you tested any device ????
Which languages are with this ROM ?????
did you find any bugs ????????????????
which which new options are with your ROM ????
gatutkoco said:
registry editing.
be sure to unlock your registry using cereg editor
# change sync path location
HKLM\Software\Microsoft\Windows CE Services\FileSyncPath = "\Storage Card\My Documents
# change list program at start menu
HKEY_CURRENT_USER\Software\Microsoft\Shell\StartMe nu Select Multi String "Order"
# speed up
HKEY_LOCAL_MACHINE\SYSTEM\GDI\GLYPHCACHE
default 16384 change to 32768
HKEY_LOCAL_MACHINE\System\StorageManager\FATFS
“CacheSize” from “0” be“4096”
HKEY_LOCAL_MACHINE\System\StorageManager\Filters\f sreplxfilt”
“ReplStoreCacheSize” from “0” be“4096”
# Enable call Recording menu item with registry
HKLM\Software\Samsung Create Key AUDIOGAIN
AUDIO_DEBUG_FLAG value 40
HKLM\Software\Microsoft Create Key Voice
AllowInCallRecording value 1
HKLM\Drivers\BuiltIn\WaveDev
VocRecPath value 2
HKCU\ControlPanel\Sounds Create Key TTSAnnounce
Category value InCallFeedBack (String)
HKLM\System Create a key "AudioRecording"
Enable value 1 (DWORD Decimal)
# custom font
* Copy ttf files to windows\fonts
* open your favorite registry editor
* then go to HKEY_LOCAL_MACHINE\Software\Microsoft
* create new string and name it FontPath
* create new string value at Fontpath key.name FontPath, value= windows\fonts
* Soft reset
# internet explorer to standard view
HKLM\security\Internet explorer
MSHTML : value 0
softreset
# notification ringtone duration
HKCU\ControlPanel\SoundCategories\Notification.
p = play
10 = duration
s = stop
v = vibrate
change the value with whatever you want
Click to expand...
Click to collapse
"# Enable call Recording menu item with registry
HKLM\Software\Samsung Create Key AUDIOGAIN
AUDIO_DEBUG_FLAG value 40
HKLM\Software\Microsoft Create Key Voice
AllowInCallRecording value 1
HKLM\Drivers\BuiltIn\WaveDev
VocRecPath value 2
HKCU\ControlPanel\Sounds Create Key TTSAnnounce
Category value InCallFeedBack (String)
HKLM\System Create a key "AudioRecording"
Enable value 1 (DWORD Decimal)"
Hi buddy,
What kind of valuekey of these will be?
Thanks.
about call recording, you will see a record button when you receive or make a call. its at menu pop up when connected.
you should know about how to record incoming and outgoing call. when you connected,you must activate the speaker phone too, to record your call progress.
about my rom its only for omnia pro. don't ever to flash it with any device.
haven't any bugs yet since i flash 2 days ago, only one problem keymap on office mobile 2010, but it can solved with some trick.
new feature in J-Revalution v1.0 :
1.stable n fast
3.new program resco file explorer
4.titanium panel as default homescreen
5.more homescreen with rinku icon bar
6.batteries icon with green color
7.new start up n shutdown animation
8.call animation with new skin
9.office 2010
10.and many more
the rom will be release on friday
Waiting for that day bro.....
#fail
I do bluetooth PROCEDURE more when I try to copy the files to the windows folder file "connectgsm.cpl.xml" says that I am not allowed, as I finish the procedure?
gatutkoco said:
new feature in J-Revalution v1.0 :
3.new program resco file explorer
Click to expand...
Click to collapse
MOD NOTICE!
Resco Explorer is copyright protected software and as per XDA rules you can't include it in ROM.
;D
thanks, i used the Resco explorer to copy the archive to native folder of windows and i completed the mod of bluetooth, mod very good
Spiaatie said:
MOD NOTICE!
Resco Explorer is copyright protected software and as per XDA rules you can't include it in ROM.
Click to expand...
Click to collapse
update progress for my rom
now using file explorer
gatutkoco said:
update progress for my rom
now using file explorer
Click to expand...
Click to collapse
Wowwwwwwwwwwwwwww.......................
Looking so beautiful interface with beautiful icons........ waiting your ROM for my device.........
Good luck for making well with this ROM..........
Added new ROM in first post.
hi, this work is amazing. could you please tell me how to install it? thanks a lot! keep tight!
lcjdesign said:
hi, this work is amazing. could you please tell me how to install it? thanks a lot! keep tight!
Click to expand...
Click to collapse
if you want to upgrade your device firmware just ekstract the file then follow this instruction
http://forum.xda-developers.com/showpost.php?p=9317579&postcount=2
gatutkoco said:
if you want to upgrade your device firmware just ekstract the file then follow this instruction
http://forum.xda-developers.com/showpost.php?p=9317579&postcount=2
Click to expand...
Click to collapse
Thanks a lot! will try this later tonight.
ROM Updating doubts
'm using windows 7, is this is not really good for updating this ROM ?????
Actually what problems are with W7!!!!!!!!
When my bricked motherboard before on this device, that time i used this same OS but i installed ROM again on my device with this same OS.....
When i installed one ROM, does not need to select CSC file on that flashing tool, actually what the problems are with that CSC file!!!
This file is using for which purposes!!!!!!!!!!!!
I need some reliable informations for updating my device.....