I just flashed latest HTC official ROM (WWE 2.03) onto the phone. These problem still exist!!!!
1) WIFI lost its connection everytime the phone went into black screen (stand by mode). When it wake from standby mode, the phone will search for available access source (i.e. my home router), but just couldn't astablish connection, even it has found the access point. Rabish!!
2) Internet browser, whether, google map, etc. all don't work in WIFI connection. I have set all connection to use MY WORK connection, and all the wifi connection to Internet connection....or all the possible combinations. It just not allow data to be transfer via WIFI connection... via my home router!!!
Conclusion is Diamond WIFI connection is RUBISH! If anyone want to use WIFI on their device, either at home or in public, DON'T BUY HTC PHONE!!!!!
****!! Wasting of my money!!!
i am using htc touch and my brother is using htc diamond..both wifi are working as good as it should be..
1. i think the "turn off when device in sleep mode" is the default setting..need to change it or make your device awake longer..
2. maybe you should try to set all to internet connection..it works for us..
just my opinion..correct me if i'm wrong..
regards..
1. you can tweak that wifi is always on even in standby
2. flash again rom or flash mine rom(link in signature, you need H-spl for that) it must work..i can use intentet(google maps,msn,opera,ie) via wifi..
maybe singal is to weak, how far are you from ruter?
benko286 said:
1. you can tweak that wifi is always on even in standby
2. flash again rom or flash mine rom(link in signature, you need H-spl for that) it must work..i can use intentet(google maps,msn,opera,ie) via wifi..
maybe singal is to weak, how far are you from ruter?
Click to expand...
Click to collapse
Router is infront of me...
My ROM is the latest HTC official WWE 2.0 version (just got it down two days ago), and I have tried Olinex's 1.30 ROM and 1.93 ROM. All flashed with Oli's Hard SPL ??!!
May I know how to tweak the WIFI into alwasy stays on mode?
Thank you!
benko286 said:
1. you can tweak that wifi is always on even in standby
2. flash again rom or flash mine rom(link in signature, you need H-spl for that) it must work..i can use intentet(google maps,msn,opera,ie) via wifi..
maybe singal is to weak, how far are you from ruter?
Click to expand...
Click to collapse
Hi benko286,
Flashed your preme v2.0 ROM. Nice piece of work! Really appreciated.
However, my WiFI problem where programs like internet browser still not working in WIFI connection.
These are the settings that I have tried:
1) WIFI connected to my home router (less than 5 meters infront of me).
2) In WIFI manu -> Wireless -> "Configure Wireless Networks" page -> set "Connecter to" to " The Internet"
3) In WIFI manu -> Network Adapters -> Configure network adapters -> Set "My network cards connects to" to "The internet".
4) In Connections manu -> Advanced -> Select Networks -> Programs that automatically connect to the internet should connect using: "My Work Network".
NOT WORKING! Opera, IE, Wheather, etc. still can't work in WIFI connection!!!
Not only these, I also tried 2) and 3) set to "Work" (instead of "The Internet"). ... Also not working!!
I face this problems too.
According to Xda-dev Wiki, no one can fixed it or even know what is the main cause.
But in my opinion, there is a problem with the wireless adapter drivers.
HTC MUST FIX IT!!!
Related
I desperately need to get ICS over WiFi working. I've tried WMWiFiRouter, but it either keeps giving me 'Fatal Error' or the connection drops off the moment the PC connects to it. I've also tried ICSControl.exe, a program that someone on XDA has created, but I just couldn't figure out how to get things going with that (or I'm too dumb).
Could someone please tell me the easiest way to get my data connection working on my laptop over Wifi? I'm using Raphael with the stock rom.
Cheers
its built in i think in the commanager last option. but it is set to bluetooth pan standard if i am correct.
you can try use advanced config 3.1 and goto data connections.. change private interface for internet sharing to wlan.
i was surprised to see Advanced Config had the option there. But it still doesn't work
I changed the private interface from the default of 'Custom' to WLAN11g1 and it asks me to soft-reset the device, which i did. Then I go into Internet Sharing, and I still only get 'USB' or 'Bluetooth PAN' as options. Am i missing something?
there is another wlan option in there.
i have no idea how this is supposed to work :/
one would think that setting this option would set the setting to wlan as supposed to. not sure if you should change it or not afterwards with the connectionsharingsettingstab. it probably overwrites the value in registry.
here is something you can try :
turn on wifi
set the option in adv config to TnetWln1
reset
turn on this wifi AP application and try using it
WMwifiRouter
Just tried WMwifiRouter on my Touch Pro and it worked fine
Works fine for me too. Takes all the hassle out of it!
adityasen said:
I desperately need to get ICS over WiFi working. I've tried WMWiFiRouter, but it either keeps giving me 'Fatal Error' or the connection drops off the moment the PC connects to it. I've also tried ICSControl.exe, a program that someone on XDA has created, but I just couldn't figure out how to get things going with that (or I'm too dumb).
Could someone please tell me the easiest way to get my data connection working on my laptop over Wifi? I'm using Raphael with the stock rom.
Cheers
Click to expand...
Click to collapse
2 questions:
1) Which network are you with? If your connection works but stops when you get ICS to try to connect, it may be blocked by your network if a) you are not allowed to use your mobile as a modem and/or b) ICS is not allowed. Does your connection work with standard email/web?
2) Why sharing your connection over wifi when BT pan works so well and so easily and you only need to share with your laptop? I use wifi when the laptop can connect directly to a router/hotspot, otherwise I use BT Pan. There is no real speed compromise as the bottleneck is the 3G connection itself), and BT 2.0 EDR offers a wide enough bandwidth for what you want to do. I use skype on my laptop with my 3G connection shared over BT PAN and it works a treat (that is, better than Skype 2.2 on WM!).
I'm probably missing something....
Manni01 said:
2 questions:
1) Which network are you with? If your connection works but stops when you get ICS to try to connect, it may be blocked by your network if a) you are not allowed to use your mobile as a modem and/or b) ICS is not allowed. Does your connection work with standard email/web?
2) Why sharing your connection over wifi when BT pan works so well and so easily and you only need to share with your laptop? I use wifi when the laptop can connect directly to a router/hotspot, otherwise I use BT Pan. There is no real speed compromise as the bottleneck is the 3G connection itself), and BT 2.0 EDR offers a wide enough bandwidth for what you want to do. I use skype on my laptop with my 3G connection shared over BT PAN and it works a treat (that is, better than Skype 2.2 on WM!).
I'm probably missing something....
Click to expand...
Click to collapse
ICS has nothing to do with your carrier. It works the same way on your phone as it does on the pc. it merely routes the gateway to the devices connected to the ICS network.
I myself have a TP and use ICS with Softbank (softbank roms do not contain ICS) and it works fine.
I agree with you however, when it comes to bluetooth. Even if your PC doesnt have BT, it is well worth it to buy one of those nifty mini adapters.
they are so tiny, you wont even see them. But easy to setup and fast enough.
im with 3. nomal mail / web works fine. there are no restrictions by the network for ics. as for the BT question, I dont have BT on my laptop. it has built in wifi and i want to use that. i also have a mac n have never managed 2 get BT PAN working with os x.
Can't get BT pan to work with Vista either. My laptop does not "find" the HTC Touch pro as a pan enabled phone.
latest version works ok
Mod Edit: Attachment removed by request from the author.
the latest version is 1.10 not 0.94. have tried it with not much luck
adityasen said:
the latest version is 1.10 not 0.94. have tried it with not much luck
Click to expand...
Click to collapse
its 0.91...
you are sure we are talking about the same application ?
there is also one from htc which isnt a wifirouter program actually
da_jojo said:
its 0.91...
you are sure we are talking about the same application ?
there is also one from htc which isnt a wifirouter program actually
Click to expand...
Click to collapse
Version 0.91 is the last "free" version of the program. It is no longer free and it's version number has changed as well, version 1.11 is the latest.
henkreyn said:
Can't get BT pan to work with Vista either. My laptop does not "find" the HTC Touch pro as a pan enabled phone.
Click to expand...
Click to collapse
First make sure you have no active BT connection, either on your desktop/laptop or on the TP (i.e. BT Headset).
You need to go to Comm Manager (BT switched on of course!), select BT Options (lower right menu), Mode, and select "make this device visible to other devices".
Once you've setup a partnership, it will probably say "connection denied" on the first connection.
Don't be as dumb as me, got to internet sharing (all programs) and select BT Pan and Connect... Then try to connect BT Pan again...
It *should* work (works a treat on my Vista 32 desktop and my Sony TZ11 Laptop, I get around 400-500kbps down and a bit less up).
BT PAN
I followed your directions exactly, but the problem remains. I get however once the phone pairs with the laptop (HP tx2000) a request for the "Bluetooth peripheral device" driver. I can't find this driver so it has probably something to do with this.
Maybe you should try IcsControl.
It's free and works great.
Id go wmwifirouter route. I have never had good luck with icscontrol never could get it to work and it pissed me off instead
henkreyn said:
I followed your directions exactly, but the problem remains. I get however once the phone pairs with the laptop (HP tx2000) a request for the "Bluetooth peripheral device" driver. I can't find this driver so it has probably something to do with this.
Click to expand...
Click to collapse
You need to update the bluetooth driver for your laptop. Check the manufacturer (in, the device manager), usually widcomm or toshiba, and try to get it from their website if HP doesn't provide it (although they should). Vista drivers usually work, but I guess you're using XP? It may be worth checking on HP website to see if their offer updated BT drivers for your laptop.
Nighthawk said:
Version 0.91 is the last "free" version of the program. It is no longer free and it's version number has changed as well, version 1.11 is the latest.
Click to expand...
Click to collapse
I've tried both versions of the program (free old V0.91 and trial for the commercial V1.11).
They both work with the Touch Pro (tried with my Vaio TZ11).
V1.11 is however around 20% faster (I get an average of 500kbps with V0.91, and consistently above 600kbps down with the V1.11).
So the old version gives about the same bandwidth as my BT Pan (without the convenience of sharing between more than one client), while the V1.11 seems to be better optimised and provides better bandwidth.
The response time is around 100ms for both (against around 140ms for BT Pan). Upstream is around 300kbps for both version , against 400kbps for BT Pan.
This is on a UK T-Mobile HSDPA connection, with 3/4 bars signal strength (could those who manage to get it to work let us know if they get better figures?).
You should obviously get much better with Vodafone in a 7.2Mbps area like London/Major airports.
-Does anyone know how to priotize w-lan for internet connections?
It seem that my phone always uses the mobile connections (GSM, 3G etc).
In menu for connections where internet connections can be created, I can't find anyting about w-lan.
This is something I've been meaning to ask about while I wait for the Fuze. By way of background, I have a Cingular 8525 with the original (WM5) ROM, and it drives me nuts using it at home. I only get EDGE inside my house, but the stupid phone persists in making an EDGE data connection instead of using the nice, fast Wifi connection that I just enabled. I use NoData to make sure it doesn't connect via EDGE or 3G, and then half the time it says it says that it can't connect -- even though the icon says that it is connected!! The only way I can reliably connect via Wifi is to go briefly into and out of flight mode, then turn on Wifi before connecting.
I'm really, really hoping that the situation is better with the Touch Pro/Fuze. Can anyone reassure me on that?
it should be accessing wifi first by default i believe...unless other connection is already connected
Hello!
Start first the WiFi Connection and then the Internet Explorer or Opera.
pjo12345
There's this stupid thing with wlan connections in WM - if connection type is set to 'Work', you can browse through files on other computers in (W)LAN at home, but any Internet connection wll be realised through GRPS/3G. To make it connect to the Internet using WiFi, you need to switch wifi type back to 'Internet'.
Maybe that's the thing?
Is there a way how to setup that the WiFi is connected to both (work AND internet)? I never saw WiFi connected only to work network... I assume there is no way but why not to ask ;-)
I know that many others have problem with that, but I didn't find any solution yet...
Because when I set it as work, my Exchange sync is working but no Internet, and when I switch to Internet, opera and QuickpGPS is working, but no Exchange sync (it is trying to open VPN connection because I need to go though inside address to the server because certificates and of course it cannot get it). Or I need somehow set that no VPN will be dealed on this WiFi network...
I need something like BOTH or Auto option.
It seems to be switching from Wlan to G / 3G / H when the signal is not that great. Mostly with the weather tab and Opera. Quick GPS works fine. The way I make sure it is on the internet through wlan is to shutdown the telephone and keep the wlan on with comm manager. The disadvantage is that anyone calling will be heading to your voicemail. Another option is to use the "Nodata" program, en disable to internet connections.
On Touch Pro, I usually just go to COMM MANAGER and switch on wifi and switch off data connection. It is only a couple of quick steps and saves battery, since you don't need both on, if you only want to use wifi.
I am sure there must be a more seamless solution, but I like easy fixes.
wmm said:
I'm really, really hoping that the situation is better with the Touch Pro/Fuze. Can anyone reassure me on that?
Click to expand...
Click to collapse
No it is not better. Turning on WiFi is not enough. It will continue to use the cellular data connection until you manually turn it off. This wouldn't be so bad, but in my experience I've had to push the button to turn off the cellular connection multiple times before it would actually do so. What would be really nice is if WM could seamlessly switch from the cellular network to WiFi, with zero user interaction, just like the iPhone does.
I got an other problem with wifi. When I establish a wifi-connection and pull my mail the ppc still connect with a data-canection and didn't use the wifi. My kaiser used the wifi-connection for that.
8notime said:
No it is not better. Turning on WiFi is not enough. It will continue to use the cellular data connection until you manually turn it off. This wouldn't be so bad, but in my experience I've had to push the button to turn off the cellular connection multiple times before it would actually do so. What would be really nice is if WM could seamlessly switch from the cellular network to WiFi, with zero user interaction, just like the iPhone does.
Click to expand...
Click to collapse
I wrote the original post before I had a chance to try it for myself. I've had a Fuze for three weeks now, and it works fine for me. I turn on wifi and the Fuze uses wifi. I turn it off and it goes back to normal wireless. (I did do the registry edits to turn on the HSDPA stuff in the connections tab and enabled the modified connection icons in the menu bar. I don't know if that had any effect on this issue or not, but it does what I would expect now.)
I have spent the last week at work more focused on the XDA forum than what I am actually paid to do here at work...
I am so unproductive now, I am actually willing to donate to the forum if the forum can produce results, so that I can finally get back to work in peace!
I have thoroughly read through most relevant posts. I cannot find any specific post that solves the problem I have, so I decided to post anew, against some suggestions...
Anyway, the problem is that,
I cannot get any of my applications that are internet-dependent (skype, mail, weather etc) to access the WIFI connection that "apparently" looks connected, IF WEP (or any other encryption, for that matter) is enabled on the WIFI Router.
OK, what I mean by "apparently" is that the Wifi signal appears at its fullest, the lollipop on top of the screen with arrows is there, and even if I go into start>settings>Connections>wifi, it says that (my particular internet connection, named) Linksys is "connected".
The problem is, with wep encryption (and any other encryptions), it has worked once or twice. I cannot remember if that was before or after the Hard-SPL and radio downgrade (to get it unlocked) but ever since that "beginners luck" connection, I have had no success with connecting these apps to internet through WIFI.
First of all, I cannot figure out why, but I can connect by
1/ GPRS (the only available here in Vietnam - no 3G /HSDPA yet),
2/ with open connection and no encryptions of any kind by the WIFI router, my WIFI and Raphael connects fine. Data transfer happens.
The reality is, it is not very realistic for me to ask all others at work to make their WIFI connection with no security or encryptions..
So, having explained the situation, in a nutshell, problem is that by enabling excryption like WEP, the connection does not allow me to use WIFI on my raphael.
Is this hardware or software on Raphael side? or is it WIFI router side?
Other devices, including my TyTn II connects fine with WEP, which rules out the router, right?
I cannot remember if the problem started before or after OliPro unlock...
If it worked before but not now, there is of course always the possibility of hardware mulfunction, but since it works with no encryption, I am guessing it is hardware?
I have gone to other WIFI networks that are healthy, with other hand held devices happily connected to WIF, but nope...not me...
Any ideas guys?
WRT54G2 Wireless_G Router
DHCP Enabled,
Wireless network mode is set at mixed (both G and B, but by the way, I have tried only G and only B too, with no luck)
Channel set at 1, SSID enabled.
WM 6.1
ROM 3.14.731.04 JPN
Radio 1.10 Olinex
Protocol 52.35.25.21H
AFAIK, Raphael connects to WEP, WPA, WPA2(TKIP/AES)...
did you try deleting all the wifi settings and reconnecting?
or hard reset?
jewelkobayashi said:
I have spent the last week at work more focused on the XDA forum than what I am actually paid to do here at work...
I am so unproductive now, I am actually willing to donate to the forum if the forum can produce results, so that I can finally get back to work in peace!
I have thoroughly read through most relevant posts. I cannot find any specific post that solves the problem I have, so I decided to post anew, against some suggestions...
Anyway, the problem is that,
I cannot get any of my applications that are internet-dependent (skype, mail, weather etc) to access the WIFI connection that "apparently" looks connected, IF WEP (or any other encryption, for that matter) is enabled on the WIFI Router.
OK, what I mean by "apparently" is that the Wifi signal appears at its fullest, the lollipop on top of the screen with arrows is there, and even if I go into start>settings>Connections>wifi, it says that (my particular internet connection, named) Linksys is "connected".
The problem is, with wep encryption (and any other encryptions), it has worked once or twice. I cannot remember if that was before or after the Hard-SPL and radio downgrade (to get it unlocked) but ever since that "beginners luck" connection, I have had no success with connecting these apps to internet through WIFI.
First of all, I cannot figure out why, but I can connect by
1/ GPRS (the only available here in Vietnam - no 3G /HSDPA yet),
2/ with open connection and no encryptions of any kind by the WIFI router, my WIFI and Raphael connects fine. Data transfer happens.
The reality is, it is not very realistic for me to ask all others at work to make their WIFI connection with no security or encryptions..
So, having explained the situation, in a nutshell, problem is that by enabling excryption like WEP, the connection does not allow me to use WIFI on my raphael.
Is this hardware or software on Raphael side? or is it WIFI router side?
Other devices, including my TyTn II connects fine with WEP, which rules out the router, right?
I cannot remember if the problem started before or after OliPro unlock...
If it worked before but not now, there is of course always the possibility of hardware mulfunction, but since it works with no encryption, I am guessing it is hardware?
I have gone to other WIFI networks that are healthy, with other hand held devices happily connected to WIF, but nope...not me...
Any ideas guys?
WRT54G2 Wireless_G Router
DHCP Enabled,
Wireless network mode is set at mixed (both G and B, but by the way, I have tried only G and only B too, with no luck)
Channel set at 1, SSID enabled.
WM 6.1
ROM 3.14.731.04 JPN
Radio 1.10 Olinex
Protocol 52.35.25.21H
Click to expand...
Click to collapse
I completely understand what you are going through & I am going to suggest something for you but the results might vary.
Make sure that Wi-Fi is turned off.
Open your Comm Manager | Settings | Wireless LAN.
When you're in the Wireless LAN Settings panel, select Power Mode.
Slide the selector to Best Performance.
Tap OK & when you're back in the Comm Manager, turn on the Wi-Fi adapter.
Setup your work connection & see if your internet connections work.
One thing to note, while this has resolved my connectivity problems, the settings are not always saved for some unknown reason.
So, be prepared to key in the settings again.
I resorted to everything , not leaving anything to chance, and did many things at once.
It is now fixed, it seems, but at great cost in terms of time, and I cannot be sure which one of these was actually helpful.
But I hard-reset the TP, as well as updating the firmware on both the modem and the WIFI router, and then did hard reset on them too...
I cannot judge on what turned out to be true on other peoples' TP, but for me at least, for both TyTn II and Touch Pro I am currently using, setting connection from "internet" to> "Work" did not help at all....
Thanks anyways...
Hi, Guys.
I'm pulling my hair out trying to stop my WM6.1 blackstone (Touch HD) from attempting to connect to the data connection when I do something network related on the phone. Because It's already connected to wifi.
I'm connected to wifi, and can browse the web, use messenger etc.. But if I attempt something like entering a network path like \\NETDISK\share into the file explorer, it says "Cannot connect etc..." and it's trying to connect via the HSDPA connection, which can't access my local network anyway. It needs to use the wifi...
Is there any way to stop it trying to connect? In the connection settings, I've deleted all modem connections, leaving just the wifi connectivity. If I try to add wifi as a modem, the option is not there...
I'm really lost with this. Please offer any advice you can. I'm close to twisting it in half..
i-CONICA said:
Hi, Guys.
I'm pulling my hair out trying to stop my WM6.1 blackstone (Touch HD) from attempting to connect to the data connection when I do something network related on the phone. Because It's already connected to wifi.
I'm connected to wifi, and can browse the web, use messenger etc.. But if I attempt something like entering a network path like \\NETDISK\share into the file explorer, it says "Cannot connect etc..." and it's trying to connect via the HSDPA connection, which can't access my local network anyway. It needs to use the wifi...
Is there any way to stop it trying to connect? In the connection settings, I've deleted all modem connections, leaving just the wifi connectivity. If I try to add wifi as a modem, the option is not there...
I'm really lost with this. Please offer any advice you can. I'm close to twisting it in half..
Click to expand...
Click to collapse
Hi,
What about putting that networkpath in the adressbar of your browser ?
Dirk
I'm getting so tired of answering this question.......it's very easy
I say you should try and figure it out alone...because that's how I did it!
1- you need a modem Wifi
http://www.topachat.com/comprendre/images/plusieurs-pc-routeur_modem_adsl_wifi.jpg
2- now with a windows vista
demarrer ->panneau de configuration -> centre reseau
3-choose
configurer une connexion un reseau
4- follower Stages in the pictures
http://img53.imageshack.us/img53/6629/79801560.png
http://img187.imageshack.us/img187/2857/31650978.png
http://img440.imageshack.us/img440/7751/78968229.png
http://img240.imageshack.us/img240/1165/90080871.png
http://img122.imageshack.us/img122/1207/22765885.png
http://img161.imageshack.us/img161/9347/57316761.png
5- you need to attach the cable internet to your Pc For the distribution on the Internet
6-
http://img66.imageshack.us/img66/1596/15072009171800.png
http://img150.imageshack.us/img150/2070/81308719.png
7- now you can work with the wifi of you POcket PC
Gooodman, thanks for the reply, while i'm sure many will find this thread useful now, It's of no help to me.
I do have connectivity via WiFi, It's not a normal networking issue, my network is setup perfectly.
The issue is that the Touch HD is always trying to connect via other means even when wifi is available and connected.
For instance, I'll open messenger, or click download on the aGPS data, and the phone attempts to connect to the internet via my phone service provider, when wifi, is connected and ready.
Some apps connect via wifi fine, it seems to be the WM software itself attempting the connection rather than any of my applications.
I don't think it's as straight forward as the first replyer seems to think.
If he'd be so kind as to post this incredibly simple resolution, i'd be very greateful.
I also struggle with this, but this seems to affect it:
a. Start\settings\connections tab
b. Connections
c. Advanced tab
d. Select Networks button
e. Play around with the drop down menu's, especially the lower one.
I cannot be more precise as I do not completely understand myself, but this has helped me in the past.
I've noticed that my WiFi connection is unstable regardless of which ROM I'm using. I'm sitting less than 10 feet from my router and the signal is excellent yet my Fuze WiFi won't connect...I can't update 2.1 weather, can't open a page in Opera and IE.
Anyone out there with a solid WiFi connection every time they use it? Which ROM are you on? What are your settings/edits?
I'm desperate to find a solution to this since having a built in WiFi is one of the perks of the Fuze. And I don't want to be held hostage by AT$T ridiculous data plan.
i'm using EnergyRom Jan 27th build 21889. I've never had any problems with wifi for any EnergyRom builds i use. I don't really set anything up, i just turn wifi on, and just enter the WPA passkey and it's done, it's only a one time setup, everytime i turn wifi on it'll automatically connect.
There are tools like Wifi Monster etc that can show you the strength of the wifi signal, as well as tools that gives you options to set up an advanced profile (I think it's called Wifi Profile).......
do a search for Wifi in PPCWarez and you'll find what you need.
chaoscreater said:
i'm using EnergyRom Jan 27th build 21889. I've never had any problems with wifi for any EnergyRom builds i use. I don't really set anything up, i just turn wifi on, and just enter the WPA passkey and it's done, it's only a one time setup, everytime i turn wifi on it'll automatically connect.
There are tools like Wifi Monster etc that can show you the strength of the wifi signal, as well as tools that gives you options to set up an advanced profile (I think it's called Wifi Profile).......
do a search for Wifi in PPCWarez and you'll find what you need.
Click to expand...
Click to collapse
Thanks for the reply. I'm also on EnergyRom Jan 27th build 21889....I've actually been an avid follower of NRG Roms but have never had a consistent WiFi connection. I really don't know where I'm going wrong. I've been using the same WiFi for the past 3 years. I didn't have WiFi connection problems with RoMeo's Rom on my Tilt or on my Hermes. Just would like to have a dependable WiFi connection. I'm pretty sure it's not the Rom..just curious if I had things configured properly.
I am also having problems with the Wi-Fi connection on my HTC Touch Pro. It is very unstable and unreliable -it flies for 10-20 seconds, and then hangs. The problem persists with different routers. I am using the stock HTC ROM.
Performance Mode
Hi guys,
have yo tried switching WiFi mode from "Battery Saving" to "Performance"?
Start/Setting/Connections/Wifi icon
The same wi fi problem for me: it recognizes the network, it asks for the pass, but it doesn't connect.
i'm two meters from the router... any suggestion?
Try...
Change your wifi settings to preformance first.
Things that affect WiFi not particular to your phone:
1. Bluetooth on and active (same frequencies) on your phone as well as others
2. Other Routers (esp. if you live in an apartment)
3. Running Microwaves ovens
4. Other RF devices in the 2.4GHz range. (i.e. wireless keyboards, mice, novelty devices, etc.)
The only step to do is change your router at home to another channel and try again. If you are connecting outside your home, then you are at the mercy of the provider.