Database Info

SSPL using SD card for Kaiser?

I'm new to the Kaiser world but have a little experience with flashing from the Hermes side of things. I used to have SSPL-HERM.exe on my 1GB SD card and would add any .nbh file image to the card, rename it HERMIMG.nbh, then run SSPL on my device to start the upgrade. Is there a solution like this for the Kaiser? I checked the wiki, searched the forums and searched the cloud without any answers. I tried using the bootloader reset with the image file (renamed as KAISIMG.nbh) on my card but I keep getting the "image file not found" flashing on the screen, then it returns to the tri-color screen.
I'd stick with running the custom ruu's but my connection keeps dropping off on my work PC before the ROM can flash. And it's just no good to have to wait until I get home to flash a new ROM, right?
Thanks in advance for the help.

live4vball said:
I'm new to the Kaiser world but have a little experience with flashing from the Hermes side of things. I used to have SSPL-HERM.exe on my 1GB SD card and would add any .nbh file image to the card, rename it HERMIMG.nbh, then run SSPL on my device to start the upgrade. Is there a solution like this for the Kaiser? I checked the wiki, searched the forums and searched the cloud without any answers. I tried using the bootloader reset with the image file (renamed as KAISIMG.nbh) on my card but I keep getting the "image file not found" flashing on the screen, then it returns to the tri-color screen.
I'd stick with running the custom ruu's but my connection keeps dropping off on my work PC before the ROM can flash. And it's just no good to have to wait until I get home to flash a new ROM, right?
Thanks in advance for the help.
Click to expand...
Click to collapse
What are you wanting to load, Hard SPL's or ROM / Radio images?
The KAISIMG.nbh on the Root of a FAT32 formatted SD card works for ROM / Radio / OEM SPL's (If SPL override is enabled).
To upgrade a hard SPL (If SPL override is disabled) then you can follow this post from cmonex: http://forum.xda-developers.com/showthread.php?t=420683
Ta
Dave

DaveShaw said:
What are you wanting to load, Hard SPL's or ROM / Radio images?
Click to expand...
Click to collapse
Mostly ROM/Radio images - I've got 3.29.Hard loaded right now and it seems to be working ok.
DaveShaw said:
The KAISIMG.nbh on the Root of a FAT32 formatted SD card works for ROM / Radio / OEM SPL's (If SPL override is enabled).
To upgrade a hard SPL (If SPL override is disabled) then you can follow this post from cmonex: http://forum.xda-developers.com/showthread.php?t=420683
Click to expand...
Click to collapse
My card is formatted FAT32 (necessary for the Hermes flash as well) but I'll give a reformat a shot and see what happens. Thanks for the quick response.

live4vball said:
Mostly ROM/Radio images - I've got 3.29.Hard loaded right now and it seems to be working ok.
My card is formatted FAT32 (necessary for the Hermes flash as well) but I'll give a reformat a shot and see what happens. Thanks for the quick response.
Click to expand...
Click to collapse
If it is just images, just place the KAISIMG.nbh on the root and then enter the bootloader (Camera and SoftReset) and the SPL will do the rest.
Ta
Dave

I tried to reformat the card using flash format but I keep getting an error saying "exclusive access to the storage card is denied (#31)."
I also tried putting the KAISIMG.nbh on the root and resetting into the bootloader but nothing happens.
Without any further suggestions I'll grab a laptop during my lunch and reformat the card in there, then retry the SD card flash.

live4vball said:
I tried to reformat the card using flash format but I keep getting an error saying "exclusive access to the storage card is denied (#31)."
I also tried putting the KAISIMG.nbh on the root and resetting into the bootloader but nothing happens.
Without any further suggestions I'll grab a laptop during my lunch and reformat the card in there, then retry the SD card flash.
Click to expand...
Click to collapse
I use it all the time like this. Just make sure the format is in Windows (not via Resco, etc).
Oh, and I don't think it support's volume labels.
Ta
Dave

Also there have been some issues reported with Kingston 1GB cards not being recognized for some reason. I have a 1GB Kingston and I 1GB Sandisk and after reading the post I never tried the Kingston but the Sandisk works fine.

I formatted my card, dumped the image file onto it, sent the phone to bootloader and still got the same "image file not found".
By some stroke of luck I was able to run the customruu from my work pc after moving to a different USB port, once. Now I keep running into the connection dropoff that I had been seeing in the past.
By the way, the 1GB card I'm using is from ativa...

Must've been the card. I used my 4GB sdhc card with no problems what-so-ever. Chalk one up for Ativa in the these cards may not work for flashing ROM's section.
Thanks for the help everyone.

severely frustrated and in desperate need of help!!

i've been trying to update my tilt's rom and I don't know what im doin wrong. i've tried flashing mbarvian's solace v 1.5 rom and revrom v8 (sorry I can't remember who cooked the rom) and neither is working.
i've followed every step in the sticky for noobs like me. but when I get to step 3, which is flashing hardspl, I get lost. I moved the jumpspl files to my phone and ran jumpspl 1.93, since 1.53 seems to do nothing. it goes into bootloader, I disconnect usb, reconnect it, and try to run kaisercustomruu so I can flash hardspl 3.29. but when I try to run kaisercustomruu it just shuts down my computer. I don't know whts going on. it seems like im the only one running into this problem. i've spent the past 3 days searching the forums for a solution or reason why kaisercustomruu shuts down my comp and I can't find anything.
when I downloaded mbarvians solace rom there was another update utility that was included in the fil so I ran that. it worked, I clicked all necessary boxes, and the update initialized. but it just stays at 0 percent, and eventually gives me error 262 "update utility error" or something like that.
I tried restarting my comp and even hard reset my device. nothing is working.
im currently running the HTC windows 6.1 rom (the one straight off the site) and have hardspl 3.56.
the reason im trying to go to hardspl 3.29 is because mbarvian and the majority of people on his thread that had succes with his rom are running 3.29.
PLEASE HELP!!!

Well, you can't flash custom ROM's till you HardSPL your Tilt/Kaiser.
I noticed you didn't mention anything about disableling USB Connections in ACtive Sync/WMDC. Did you do that?
Also, kaisercustomruu is generic. Try copying the one from the ROM dl into the HardSPL dl folder. Another suggestion is do a search for flashing hardspl from sd card.

Why not use the sticky and then ask in the relevant thread? "The Sticky"
Flashing Your First Kaiser Rom (For Noobs) Read, Read & Read again, take in small steps & follow the directions to a T

stylez said:
Why not use the sticky and then ask in the relevant thread? "The Sticky"
Flashing Your First Kaiser Rom (For Noobs) Read, Read & Read again, take in small steps & follow the directions to a T
Click to expand...
Click to collapse
You will definitely get more help in that thread. But you already have hardspl, so read the part about flashing cmonex's 3.29 from your SD card, that looks like that will solve your problems.

denco7 said:
You will definitely get more help in that thread. But you already have hardspl, so read the part about flashing cmonex's 3.29 from your SD card, that looks like that will solve your problems.
Click to expand...
Click to collapse
I was going to agree with this, but then I read the flashing guide, and it says flashing from the SD card only works if you're upgrading. From the sounds of it, he doesn't have HardSPL on his phone, otherwise the cooked ROMs would flash.
To the OP, I would try another KaiserCustomRUU.exe. Just copy it from one of the custom ROMs you've downloaded and paste it into the folder you have HardSPL in. Be sure to delete the one that came with HardSPL first. If that doesn't work, maybe you could try a different computer? I don't think you need an ActiveSync connection to flash since JumpSPL puts the phone into flash mode. (Someone correct me on this if I'm wrong.) Just download HardSPL, extract, run JumpSPL, plug your phone in, and run KaiserCustomRUU.exe. It should flash!

I do have hardspl installed its v3.56. I just wanna try 3.29 cos mbarvian and the people on his rom thread that had success with his rom have 3.29 installed.
I read the flashing for noobs sticky and i've been following it verbatim. when I went to try and format my SD card to fat32 it wouldn't let me. I used resco explorer and when I tried to format it it said it wasn't unlocked. that's one thing I failed to ask about in my original post: how do I unlock the SD card?
I used 2 other kaisercustomruu's from other roms and they all forced my comp to shut down. I even ran it on my gf's comp and it shut hers down too.
help!

poppinpengawen said:
how do I unlock the SD card?
Click to expand...
Click to collapse
Take your microsd card and place it into the converter (normal sized sd card). There is a switch on the side. Place the switch in the opposite position of "lock"
poppinpengawen said:
I used 2 other kaisercustomruu's from other roms and they all forced my comp to shut down. I even ran it on my gf's comp and it shut hers down too.
help!
Click to expand...
Click to collapse
It sounds like you do not have kaisercustomruu in a folder, which contains .nbh file. Rather you are probably attempting to run it from your desktop???

poppinpengawen said:
I do have hardspl installed its v3.56. I just wanna try 3.29 cos mbarvian and the people on his rom thread that had success with his rom have 3.29 installed.
I read the flashing for noobs sticky and i've been following it verbatim. when I went to try and format my SD card to fat32 it wouldn't let me. I used resco explorer and when I tried to format it it said it wasn't unlocked. that's one thing I failed to ask about in my original post: how do I unlock the SD card?
I used 2 other kaisercustomruu's from other roms and they all forced my comp to shut down. I even ran it on my gf's comp and it shut hers down too.
help!
Click to expand...
Click to collapse
Ah, you have to use a SD Card reader on a PC to format it, not through the phone.

each time I ran kaisercustomruu it was in a folder with an nbh file. does it have to be by itself with the nbh file? just kaisercustomruu and the rom file?
oh that's all I have to do? just put it in the SD adapter and flip the switch? does it have to be in a computer for it to work?

poppinpengawen said:
each time I ran kaisercustomruu it was in a folder with an nbh file. does it have to be by itself with the nbh file? just kaisercustomruu and the rom file?
oh that's all I have to do? just put it in the SD adapter and flip the switch? does it have to be in a computer for it to work?
Click to expand...
Click to collapse
No.... there is nothing wrong with your SD card.
Do this:
1. Remove your SD card and your SIM Card. Start your device.
2. Connect your Device to your PC Via ActiveSync. Make sure you are fully connected.
3. Unzip and copy the exe file of attached JumpSPL to your device memory.
4. Run Jump/Soft SPL on your device
5. Wait for the bootloader screen to appear and "USB" to show.
6. Right-click activesync icon on the PC tray, go into connection settings and ensure Allow USB Connections is unchecked
7. Unplug your device from the USB port, wait 5 - 20 seconds, plug it back in.
8. Run KaiserCustomRUU.exe of the desired HardSPL and flash HardSPL3.29
To see if you have successfully flashed the 3.29 HardSPL press the camera and power button and press the soft reset once all at the same time, you will see the four color screen and it should display the SPL version.

Whether your SD card is locked or unlocked has no barrier on flashing SPL on your device, since you need to have it out of the device when you perform the SPL install.
Fat32 sometimes would not allow operation of certain files on your PC. thats why sometimes PPC programs or files would not open on your PC and would give you error msgs. Now some folks tried to create a virtual fat32 folder that could in some instances open or run fat32 programs that are created for mobile devices, but in most cases that would crash your PC OS and shuts it down. Same story with netCF files.
So in essence if you were to follow my instructions above, you will get it done and it should not take longer that two minutes to complete the process.
Again.... DO NOT SHORTCUT THE INSTRUCTIONS.
Good luck

asfoor said:
No.... there is nothing wrong with your SD card.
Do this:
1. Remove your SD card and your SIM Card. Start your device.
2. Connect your Device to your PC Via ActiveSync. Make sure you are fully connected.
3. Unzip and copy the exe file of attached JumpSPL to your device memory.
4. Run Jump/Soft SPL on your device
5. Wait for the bootloader screen to appear and "USB" to show.
6. Right-click activesync icon on the PC tray, go into connection settings and ensure Allow USB Connections is unchecked
7. Unplug your device from the USB port, wait 5 - 20 seconds, plug it back in.
8. Run KaiserCustomRUU.exe of the desired HardSPL and flash HardSPL3.29
To see if you have successfully flashed the 3.29 HardSPL press the camera and power button and press the soft reset once all at the same time, you will see the four color screen and it should display the SPL version.
Click to expand...
Click to collapse
I did do all that. like I said I followed the instructions to a tee, but when I ran the kaisercustomruu that was included with the hardspl file my comp just shut down.
question: if I run jumpspl and then use the htc update utility to flash hardspl, would that work? (the htc update utility is the update utility that worked when I tried to flash the rom but it just sat at 0%)

asfoor said:
Whether your SD card is locked or unlocked has no barrier on flashing SPL on your device, since you need to have it out of the device when you perform the SPL install.
Fat32 sometimes would not allow operation of certain files on your PC. thats why sometimes PPC programs or files would not open on your PC and would give you error msgs. Now some folks tried to create a virtual fat32 folder that could in some instances open or run fat32 programs that are created for mobile devices, but in most cases that would crash your PC OS and shuts it down. Same story with netCF files.
So in essence if you were to follow my instructions above, you will get it done and it should not take longer that two minutes to complete the process.
Again.... DO NOT SHORTCUT THE INSTRUCTIONS.
Good luck
Click to expand...
Click to collapse
but in the sticky it says that in order to change to cmonex's 3.29 i'd have to flash via SD card. that's why I was wondering how to format it to fat32. but i'll try to do it again and see if it works this time. thanks for the files

my sandisk 8g micro sdhc won't let me delete files, ad files, or even reformat the card

poppinpengawen said:
but in the sticky it says that in order to change to cmonex's 3.29 i'd have to flash via SD card. that's why I was wondering how to format it to fat32. but i'll try to do it again and see if it works this time. thanks for the files
Click to expand...
Click to collapse
can't you read? Why are you doing Cmonex? JUST FOLLOW MY INSTRUCTIONS. hardSPL3.29 is same protocol on both CMONEX and POF and whoever tells otherwise is full of BS. Again.... just follow my instructions..

msd24200 said:
my sandisk 8g micro sdhc won't let me delete files, ad files, or even reformat the card
Click to expand...
Click to collapse
Are you trying to add files to your card by inserting it into your laptop using an adapter?
BTW certain adapters for some reason or another will not allow you to do that after the SD card has been placed and used in a phone.
Can you access the SD card through ActiveSync? If you have installed programs on your SD card and you are trying to delete them from the SD card it would not let you as there is a shared violation in that process. The way to do is that you would need to remove the programs first from your device by using the Remove prompt in your settings page on your phone, then going to your SD card and deleting the program files. If you do it in the reverse order you will run into problems; Remnants of those programs will still reside in your main memory.
The attached is a utility that would help format SD card. DO NOT UNZIP IT. Just create a folder on your PC and save the attached in it, When done, change the file type of the attached file from zip to exe. Then right hand click it and do the extract to the folder you created. Follow the included instructions to format the SD card.

poppinpengawen said:
I did do all that. like I said I followed the instructions to a tee, but when I ran the kaisercustomruu that was included with the hardspl file my comp just shut down.
question: if I run jumpspl and then use the htc update utility to flash hardspl, would that work? (the htc update utility is the update utility that worked when I tried to flash the rom but it just sat at 0%)
Click to expand...
Click to collapse
Wait a second..... Do you have your device CID unlocked? In other words, did you unlock your device using one of the methods in the stickies? I am NOt talking about SPL .... Were you able to flash a cooked ROM on your device?

asfoor said:
Are you trying to add files to your card by inserting it into your laptop using an adapter?
BTW certain adapters for some reason or another will not allow you to do that after the SD card has been placed and used in a phone.
Can you access the SD card through ActiveSync? If you have installed programs on your SD card and you are trying to delete them from the SD card it would not let you as there is a shared violation in that process. The way to do is that you would need to remove the programs first from your device by using the Remove prompt in your settings page on your phone, then going to your SD card and deleting the program files. If you do it in the reverse order you will run into problems; Remnants of those programs will still reside in your main memory.
The attached is a utility that would help format SD card. DO NOT UNZIP IT. Just create a folder on your PC and save the attached in it, When done, change the file type of the attached file from zip to exe. Then right hand click it and do the extract to the folder you created. Follow the included instructions to format the SD card.
Click to expand...
Click to collapse
yeah i've tried adding/deleting pics, vids, music, etc... with phone and pc and neither works, up until a couple weeks ago i was moving pics/vids to and from the card with the ppc and the pc with no problems. i have used several different card adapters in case one was bad but no matter what i have done, nothing has worked. i already even tried the file you sent and couldn't get the sdformatter to work either. i haven't installed any aps to the card only save pics and all on there, keep my fav program cabs on there as well.

msd24200 said:
yeah i've tried adding/deleting pics, vids, music, etc... with phone and pc and neither works, up until a couple weeks ago i was moving pics/vids to and from the card with the ppc and the pc with no problems. i have used several different card adapters in case one was bad but no matter what i have done, nothing has worked. i already even tried the file you sent and couldn't get the sdformatter to work either. i haven't installed any aps to the card only save pics and all on there, keep my fav program cabs on there as well.
Click to expand...
Click to collapse
Sounds to me your 8GB SDHC Card failed if it worked before and isn't anymore. Can you play the music on the card from either your PC or Kaiser?

going crazy
so i've been following asfoor's advice. I ran kaiserunlocker, but none of the steps made any progress. I tried using it to flash spl3.29, but my spl still shows 3.56. I tried flashing the patched radio, but its still the same (1.65.21.18). I downloaded v2.0, so I know I have the most recent version of kaiserunlocker. help! im getting more and more frustrated.

no image found

Hello,
I know my issue was discussed here a lot but I tried everything I read but it didn't work.
Here is my story:
I bought G1 and unlocked it. I downloaded DREAIMG.nbh, format to fat32, turned off, pressed the camera button, turned on (usb cable was pluged it, oops), pressed the "end" button, install started - BUT! didn't succeed.
I repeat this more then 20 times. but nothing change.
I get message: "no image found" thatn red-green-blue-white screen.
"drea100 pvt 32b ruunbh
hboot-0.95.0000
cpld-4
radio-1.22.12.29
sep 2 2008"
after 1 sec white line appear in the middle with "serial0"
IF I plug in the usb while I press the camera button etc, the serial0 doesn't appear.
I also tried different SD card but still get the same error.
I don't have SD card reader so I use my old Nokia 6120 with usb cable to format the SD card.
Please if some one can help me...

this happened to me b4..u might have a bad download of the DREAIMG.NBH..download it form somewhere else
hope this helps
it worked 4 me

Did you put DREAIMG.nbh back on your SD card after formatting? Formatting erases whatever you have on your SD card and it sounds like thats what you did since it can't find the image file.

acanz said:
Did you put DREAIMG.nbh back on your SD card after formatting? Formatting erases whatever you have on your SD card and it sounds like thats what you did since it can't find the image file.
Click to expand...
Click to collapse
You must make sure that it is EXACTLY like this DREAMING.nbh. Not dreaming.nbh or Dreaming.nbh.

g1junky said:
this happened to me b4..u might have a bad download of the DREAIMG.NBH..download it form somewhere else
hope this helps
it worked 4 me
Click to expand...
Click to collapse
I think that I already downloaded from 3 different servers. If you have any recommended one I don't mind to check again

acanz said:
Did you put DREAIMG.nbh back on your SD card after formatting? Formatting erases whatever you have on your SD card and it sounds like thats what you did since it can't find the image file.
Click to expand...
Click to collapse
sure, if that was the problem I was embarrassed

serialtoon said:
You must make sure that it is EXACTLY like this DREAMING.nbh. Not dreaming.nbh or Dreaming.nbh.
Click to expand...
Click to collapse
As far as I read it suppose to be DREAIMG.nbh, no?
Some one else wrote here: "put DREAIMG.nbh back on your" ...
How ever, I tried to rename it as you said and still - doesn't work.

erezson said:
sure, if that was the problem I was embarrassed
Click to expand...
Click to collapse
Hahaha I would be too, but sometimes people just forget or don't even know little things like that and it can screw everything up. I've done stuff when I'm way too exhausted and should be sleeping and think I have a giant problem when its really that I overlooked something tiny like that.

erezson said:
As far as I read it suppose to be DREAIMG.nbh, no?
Some one else wrote here: "put DREAIMG.nbh back on your" ...
How ever, I tried to rename it as you said and still - doesn't work.
Click to expand...
Click to collapse
It is DREAIMG.nbh, definitely not DREAMING.nbh.

anyone has idea of solution ? plz plz plz

can you read the file using usb mount? sometimes it could be a card problem.

I did use other card and the same...
When I connect the G1 to my PC (using usb cable) nothing happen on the PC, win xp or ubuntu. But when I connect the G1 before turning it on, when I suppose to get the message "serial0" - I don't. When I disconnect the cable then I get the message.
I hope this will assist you to assist me
Thanks

you can't afford a 15 dollar card reader? doing this kind of stuff to your phone, you should be knowledgable enough to know you're going to need gear.
are you extracting the file from within the folder and placing it in the root of your sdcard?

I have same problem, need to return the phone and can't seem to get DREAIMG.nbh to work, I've done it before on same phone, for whatever reason it just doesn't see the file on sd card. I've used the same file I used before, formatted SD, etc... Oh and went back to original SPL as well.

acanz said:
It is DREAIMG.nbh, definitely not DREAMING.nbh.
Click to expand...
Click to collapse
OOps my bad, you sir are correct! Thanks.

i think its the usb cable u r using
some cables can corrupt the file during a transfer
try it out with a card reader most def
u dont want to flash a corrupt dreaimg.nbh file and get screwed....

OK, I will go to buy SD reader and let you know.
btw, I read some stuff about md5, what is it (serial of nbh?)? and how I check it?
Thanks

I bought SD reader and I am happy to announce that I am the owner of G1 (root) RC33
Thanks everybody

Treo 750 Bricked or Not?

So I got in this situation by running step 1 of the cheetahunlocker with a CHEETAH.grh file on the SD card. Everything worked (I got OK) on everything but the "OS" flash never finished, just stayed on 90% progress and never moved.
Yes I didn't do a hard SPL, I was trying, but for some reason to hardspl process grabbed a ROM off my SD card and ran with it.
From the various searches I have found that I should get a stock ROM, reflash with this.
I do not have a "Stock ROM" and cannot find one anywhere. Also how would I even flash this ROM if I had it? I would assume I would drop this ROM on the SD card (FAT 32, and rename properly) but where do I find the elusive stock ROM?
I cannot use active sync or anything, my phone with only boot into the bootloader (red/blue/green)
I have an SIM unlocked 750:
- On reset with no SD my phone hangs on the Palm OS progress bar
- On reset + PTT with no SD I get:
Palm Tr
IPL-0.20
Palm Tr
SPL-0.24.0000
- I've tried the cheetachunlocker, step 1, says my image file is corrupted at 7% progress.
- I've tried the athena_unlocker.exe with cheetachunlcoker.exe method, no dice.
- I've tried various ROMs on the SD and none of them seem to go anywhere.
If the answer is "Use your backup ROM", I don't have one. If the answer is "find a stock ROM", where????
I do have another 750 I could "backup" and then use this backup to flash my bricked 750... but how to backup the good one? How to use this backed up ROM to flash the bricked one?
Thanks in advance!!

QuakerOatz said:
So I got in this situation by running step 1 of the cheetahunlocker with a CHEETAH.grh file on the SD card. Everything worked (I got OK) on everything but the "OS" flash never finished, just stayed on 90% progress and never moved.
Yes I didn't do a hard SPL, I was trying, but for some reason to hardspl process grabbed a ROM off my SD card and ran with it.
From the various searches I have found that I should get a stock ROM, reflash with this.
I do not have a "Stock ROM" and cannot find one anywhere. Also how would I even flash this ROM if I had it? I would assume I would drop this ROM on the SD card (FAT 32, and rename properly) but where do I find the elusive stock ROM?
I cannot use active sync or anything, my phone with only boot into the bootloader (red/blue/green)
I have an SIM unlocked 750:
- On reset with no SD my phone hangs on the Palm OS progress bar
- On reset + PTT with no SD I get:
Palm Tr
IPL-0.20
Palm Tr
SPL-0.24.0000
- I've tried the cheetachunlocker, step 1, says my image file is corrupted at 7% progress.
- I've tried the athena_unlocker.exe with cheetachunlcoker.exe method, no dice.
- I've tried various ROMs on the SD and none of them seem to go anywhere.
If the answer is "Use your backup ROM", I don't have one. If the answer is "find a stock ROM", where????
I do have another 750 I could "backup" and then use this backup to flash my bricked 750... but how to backup the good one? How to use this backed up ROM to flash the bricked one?
Thanks in advance!!
Click to expand...
Click to collapse
Stock ROM would be the ROM that was officially shipped with the device, either a carrier branded version or Palm's own version.
Since you said your device was unlocked, it could be one of two possibility:
1. You unlocked it by asking the carrier to provide you with an network unlock code or by purchasing a network unlock code from a 3rd party vendor.
2. Your phone was purchased without a contract tied to a carrier so it was a Palm branded unlocked Treo 750.
Which is it?
This will determine which stock ROM you should run.
And ALL stock ROMs are floating around here or some other forum somewhere...
[Update]
Here's a link to download the 2.23 ROW ROM for the Treo 750: http://rapidshare.com/files/173145556/Treo750_2.23_ROW_WM6.rar
ROW=Rest of the World; Official Palm ROM

Great thanks for that, now how to use this file correctly, now that I screwed this up the first time. I can't use active sync, can only get to the Bootloader Red/Blue/Green screen.
Should I extract the cheetah.rgh to SD and do a reset? I don't think that has been working for me but will try again with this different ROM
Thanks!!

Stuck
So I downloaded the ROW firmware from above, copied to MicroSD and did the old reset+PTT button.
The screen flashes with "Loading..." for a moment and I'm back to
Palm Tr
IPL-0.20
Palm Tr
SPL-0.24.0000
What next? Thanks!

SOLVED!!!!
Hey I might have a solution here:
When you format the Mini SD card, do NOT do a quick format. Uncheck that box and do a full format, FAT32, Default Allocation Size.
This took over 15 minutes for me.
Do a scandisk (Right click the drive/tools/scandisk) and check "Fix Errors". This should ensure your SD card is in good shape.
Now copy a good ROM to the card and reset+PTT. The Palm should flash successfully now. If not your ROM may be corrupted.
Hope this helps! It worked for me!

QuakerOatz said:
Hey I might have a solution here:
When you format the Mini SD card, do NOT do a quick format. Uncheck that box and do a full format, FAT32, Default Allocation Size.
This took over 15 minutes for me.
Do a scandisk (Right click the drive/tools/scandisk) and check "Fix Errors". This should ensure your SD card is in good shape.
Now copy a good ROM to the card and reset+PTT. The Palm should flash successfully now. If not your ROM may be corrupted.
Hope this helps! It worked for me!
Click to expand...
Click to collapse
Glad that your phone is up & running.
Those who brick their Treo 750 should be able to follow the procedures mentioned here & other related thread to recover their devices as long as the bootloader screen is able to display.

QuakerOatz said:
Hey I might have a solution here:
When you format the Mini SD card, do NOT do a quick format. Uncheck that box and do a full format, FAT32, Default Allocation Size.
This took over 15 minutes for me.
Do a scandisk (Right click the drive/tools/scandisk) and check "Fix Errors". This should ensure your SD card is in good shape.
Now copy a good ROM to the card and reset+PTT. The Palm should flash successfully now. If not your ROM may be corrupted.
Hope this helps! It worked for me!
Click to expand...
Click to collapse
i tried that but kept having the same problem....do you think the card is bad????

[Q] Trying to root my Inspire 4g

I am asking this again here, as my previous thread seemed to be hijacked by someone elses question!
I recently decided to root my inspire as i am no longer using it as a phone, so i thought that it would be interesting to do and fun to play around with all of the options available (i recently did the same thing on my Nook Tablet, and that was the single best decision i have made a while!). I started out researching the manual techniques to do it, but i didn't really like the high risk factor there (i really dont want to brick my phone) so i tried Ace Hack Kit. Of course, it has to download the phone from 2.3.5 to be able to work. During this process, it has me hold volume up and power twice, and every time i do that, it flashes up really quick something about holding volume up and volume down and power, but then it skips past that. Anyway, here is where my problem comes in: It says that it should reboot in to hboot, which it does, but that hboot should run a test, then prompt me to continue by pressing volume up, and then should reboot, flashing twice, and that should be the end of it. THe problem is, it does boot in to hboot, but it is just a standard hboot screen asking to recover, load bootloader, etc. When i reboot from there it just boots in to the phone as normal. I have tried 3 different SD cards, all of which work and are recognized by my PC, my other phone and my Nook tablet. I have also inserted a working sim card, just to be sure that wasnt the issue, and i still cant make it work. Does anyone have any experience with his issue, or any idea what i might be doing wrong?

Opening multiple threads on the same issue is frowned upon. Even if someone supposedly hijacked your thread. I read it and only 7 posts ,I'd call that far from hijacked.
Now at the issue on hand. As mentioned in the other thread. Its the SD card. Also their is a hack kit irc go there. Plus pasting the output would help aswell

marsdta said:
Opening multiple threads on the same issue is frowned upon. Even if someone supposedly hijacked your thread. I read it and only 7 posts ,I'd call that far from hijacked.
Now at the issue on hand. As mentioned in the other thread. Its the SD card. Also their is a hack kit irc go there. Plus pasting the output would help aswell
Click to expand...
Click to collapse
OK, as i have stated, i have tried a new SD card (2, actually, with the same results.) as far as an output screen, there is none. Ace Hack Kit goes through the whole downgrade process, my phone gets in to hboot, but it is just a standard hboot screen, and it doesn't downgrade. When my phone restarts, it restarts like i just did a factory reset.

There is an output,copy what ever it says. There probably is something you missed
As too the SD card ,try adifferent one again. Your SD cards are corrupt and you need to find one that works with the kit
Also since your on a sense 3.0 did you do the changing of the boot img before running the kit?

marsdta said:
There is an output,copy what ever it says. There probably is something you missed
As too the SD card ,try adifferent one again. Your SD cards are corrupt and you need to find one that works with the kit
Also since your on a sense 3.0 did you do the changing of the boot img before running the kit?
Click to expand...
Click to collapse
by changing the of the boot img do you mean downgrading it? That is what i am trying to do. The kit is supposed to do it automatically. If that is not what you mean, please explain!
As to the output, copy thing, no, there is none of that. I have followed the instructions about 20 times. After starting the downgrade process, the phone restarts and comes up with a red triangle. At that point i am supposed to hold volume up and power, and it goes and reboots and i do the same thing again. At this point, i am told that the phone will boot into hboot and check the boot image. When it is done, i am supposed to hit volume up to confirm, and then the phone will reboot, this time in to the down graded image. That is where my problem comes in. Instead of checking the boot image, it just goes to a standard hboot screen. There are no error messages or warnings, and i have followed the instructions to the letter.
As far as the cards are concerned, the maker of the kit suggested a 2 or 4gb Sandisk series 4 or 6 SDHC card, so i bought 2 of the series 6 4gb, along with the 2 others that i already have. I also have 2 series 4 4gb and 2 series 4 2gb Sandisk cards, as well as an 8gb and 2 4gb PNY cards. All of the cards recognize in my phone and PC, and the older cards also recognize in my Nook (and were used to root and load custom roms on several other devices), i have not loaded the new cards in to any other devices besides my laptop and the phone for fear of corrupting it. So i find it difficult to believe that the cards could be the problem.

I know what the kit says. What I'm saying is In the command prompt it spits out a lot of info. For example it will say stuff about zergrush and or taco root. THATS the important stuff, this is what is used to allow the downgrade to be possible. If their a failure in the process it would state it there. That's why I keep asking for it. Don't understand your reluctance to do a simple copy and paste
The changing of the boot img is something that is different and you should read about it on attn1 site. Version 3.20 has a slightly different method

marsdta said:
I know what the kit says. What I'm saying is In the command prompt it spits out a lot of info. For example it will say stuff about zergrush and or taco root. THATS the important stuff, this is what is used to allow the downgrade to be possible. If their a failure in the process it would state it there. That's why I keep asking for it. Don't understand your reluctance to do a simple copy and paste
The changing of the boot img is something that is different and you should read about it on attn1 site. Version 3.20 has a slightly different method
Click to expand...
Click to collapse
I appreciate the attempt to help (the reason why i didn't post a direct copy paste was simply as i was in no position at the time to take one, not any reluctance to ultimately do so...) In my recent attempt to provide you with a full copy paste of the process, i was able to figure out what i was doing wrong. For anyone who may have the same or similar issue: format the SD card while it is in the phone from your PC right before starting the process. Thats all it took. Even for a card that was brand new and untouched, or formatted before putting it in the phone, i couldn't get it to work, but it worked doing it that way, and i am now happily rooted and ready to install CM9!

Glad you got it figured out. Formatting the SD card in the phone is a must, since the phone puts important files on the card after formatting.

pazzo02 said:
Glad you got it figured out. Formatting the SD card in the phone is a must, since the phone puts important files on the card after formatting.
Click to expand...
Click to collapse
Wrong. There's no need to format the sdcard to run the Hack Kit, unless your sdcard is not in fat32 system file format. The only requirement is that your sdcard must not be corrupted to work as a goldcard. Corruption of the boot partition of the sdcard can not be solved by formatting and is produced by improper dismount of it.

glevitan said:
Wrong. There's no need to format the sdcard to run the Hack Kit, unless your sdcard is not in fat32 system file format. The only requirement is that your sdcard must not be corrupted to work as a goldcard. Corruption of the boot partition of the sdcard can not be solved by formatting and is produced by improper dismount of it.
Click to expand...
Click to collapse
I'm just speaking from experience. Every SD card I've put in my phone I had to format in the phone because it was giving me problems. After, no problems. Maybe it's just my phone. or the cards weren't FAT32.
You're last sentence is probably where most people screw it up. You can't just yank an SD card out of whatever device it's in, which I think a lot of people do. But I have fixed cards that were removed without unmounting by formatting. Maybe other parts were corrupt but not the boot partition?

pazzo02 said:
I'm just speaking from experience. Every SD card I've put in my phone I had to format in the phone because it was giving me problems. After, no problems. Maybe it's just my phone. or the cards weren't FAT32.
You're last sentence is probably where most people screw it up. You can't just yank an SD card out of whatever device it's in, which I think a lot of people do. But I have fixed cards that were removed without unmounting by formatting. Maybe other parts were corrupt but not the boot partition?
Click to expand...
Click to collapse
As far as I am concerned the boot partition can not be restored by formatting. SDCARD should always be dismounted properly.