i've been trying to update my tilt's rom and I don't know what im doin wrong. i've tried flashing mbarvian's solace v 1.5 rom and revrom v8 (sorry I can't remember who cooked the rom) and neither is working.
i've followed every step in the sticky for noobs like me. but when I get to step 3, which is flashing hardspl, I get lost. I moved the jumpspl files to my phone and ran jumpspl 1.93, since 1.53 seems to do nothing. it goes into bootloader, I disconnect usb, reconnect it, and try to run kaisercustomruu so I can flash hardspl 3.29. but when I try to run kaisercustomruu it just shuts down my computer. I don't know whts going on. it seems like im the only one running into this problem. i've spent the past 3 days searching the forums for a solution or reason why kaisercustomruu shuts down my comp and I can't find anything.
when I downloaded mbarvians solace rom there was another update utility that was included in the fil so I ran that. it worked, I clicked all necessary boxes, and the update initialized. but it just stays at 0 percent, and eventually gives me error 262 "update utility error" or something like that.
I tried restarting my comp and even hard reset my device. nothing is working.
im currently running the HTC windows 6.1 rom (the one straight off the site) and have hardspl 3.56.
the reason im trying to go to hardspl 3.29 is because mbarvian and the majority of people on his thread that had succes with his rom are running 3.29.
PLEASE HELP!!!
Well, you can't flash custom ROM's till you HardSPL your Tilt/Kaiser.
I noticed you didn't mention anything about disableling USB Connections in ACtive Sync/WMDC. Did you do that?
Also, kaisercustomruu is generic. Try copying the one from the ROM dl into the HardSPL dl folder. Another suggestion is do a search for flashing hardspl from sd card.
Why not use the sticky and then ask in the relevant thread? "The Sticky"
Flashing Your First Kaiser Rom (For Noobs) Read, Read & Read again, take in small steps & follow the directions to a T
stylez said:
Why not use the sticky and then ask in the relevant thread? "The Sticky"
Flashing Your First Kaiser Rom (For Noobs) Read, Read & Read again, take in small steps & follow the directions to a T
Click to expand...
Click to collapse
You will definitely get more help in that thread. But you already have hardspl, so read the part about flashing cmonex's 3.29 from your SD card, that looks like that will solve your problems.
denco7 said:
You will definitely get more help in that thread. But you already have hardspl, so read the part about flashing cmonex's 3.29 from your SD card, that looks like that will solve your problems.
Click to expand...
Click to collapse
I was going to agree with this, but then I read the flashing guide, and it says flashing from the SD card only works if you're upgrading. From the sounds of it, he doesn't have HardSPL on his phone, otherwise the cooked ROMs would flash.
To the OP, I would try another KaiserCustomRUU.exe. Just copy it from one of the custom ROMs you've downloaded and paste it into the folder you have HardSPL in. Be sure to delete the one that came with HardSPL first. If that doesn't work, maybe you could try a different computer? I don't think you need an ActiveSync connection to flash since JumpSPL puts the phone into flash mode. (Someone correct me on this if I'm wrong.) Just download HardSPL, extract, run JumpSPL, plug your phone in, and run KaiserCustomRUU.exe. It should flash!
I do have hardspl installed its v3.56. I just wanna try 3.29 cos mbarvian and the people on his rom thread that had success with his rom have 3.29 installed.
I read the flashing for noobs sticky and i've been following it verbatim. when I went to try and format my SD card to fat32 it wouldn't let me. I used resco explorer and when I tried to format it it said it wasn't unlocked. that's one thing I failed to ask about in my original post: how do I unlock the SD card?
I used 2 other kaisercustomruu's from other roms and they all forced my comp to shut down. I even ran it on my gf's comp and it shut hers down too.
help!
poppinpengawen said:
how do I unlock the SD card?
Click to expand...
Click to collapse
Take your microsd card and place it into the converter (normal sized sd card). There is a switch on the side. Place the switch in the opposite position of "lock"
poppinpengawen said:
I used 2 other kaisercustomruu's from other roms and they all forced my comp to shut down. I even ran it on my gf's comp and it shut hers down too.
help!
Click to expand...
Click to collapse
It sounds like you do not have kaisercustomruu in a folder, which contains .nbh file. Rather you are probably attempting to run it from your desktop???
poppinpengawen said:
I do have hardspl installed its v3.56. I just wanna try 3.29 cos mbarvian and the people on his rom thread that had success with his rom have 3.29 installed.
I read the flashing for noobs sticky and i've been following it verbatim. when I went to try and format my SD card to fat32 it wouldn't let me. I used resco explorer and when I tried to format it it said it wasn't unlocked. that's one thing I failed to ask about in my original post: how do I unlock the SD card?
I used 2 other kaisercustomruu's from other roms and they all forced my comp to shut down. I even ran it on my gf's comp and it shut hers down too.
help!
Click to expand...
Click to collapse
Ah, you have to use a SD Card reader on a PC to format it, not through the phone.
each time I ran kaisercustomruu it was in a folder with an nbh file. does it have to be by itself with the nbh file? just kaisercustomruu and the rom file?
oh that's all I have to do? just put it in the SD adapter and flip the switch? does it have to be in a computer for it to work?
poppinpengawen said:
each time I ran kaisercustomruu it was in a folder with an nbh file. does it have to be by itself with the nbh file? just kaisercustomruu and the rom file?
oh that's all I have to do? just put it in the SD adapter and flip the switch? does it have to be in a computer for it to work?
Click to expand...
Click to collapse
No.... there is nothing wrong with your SD card.
Do this:
1. Remove your SD card and your SIM Card. Start your device.
2. Connect your Device to your PC Via ActiveSync. Make sure you are fully connected.
3. Unzip and copy the exe file of attached JumpSPL to your device memory.
4. Run Jump/Soft SPL on your device
5. Wait for the bootloader screen to appear and "USB" to show.
6. Right-click activesync icon on the PC tray, go into connection settings and ensure Allow USB Connections is unchecked
7. Unplug your device from the USB port, wait 5 - 20 seconds, plug it back in.
8. Run KaiserCustomRUU.exe of the desired HardSPL and flash HardSPL3.29
To see if you have successfully flashed the 3.29 HardSPL press the camera and power button and press the soft reset once all at the same time, you will see the four color screen and it should display the SPL version.
Whether your SD card is locked or unlocked has no barrier on flashing SPL on your device, since you need to have it out of the device when you perform the SPL install.
Fat32 sometimes would not allow operation of certain files on your PC. thats why sometimes PPC programs or files would not open on your PC and would give you error msgs. Now some folks tried to create a virtual fat32 folder that could in some instances open or run fat32 programs that are created for mobile devices, but in most cases that would crash your PC OS and shuts it down. Same story with netCF files.
So in essence if you were to follow my instructions above, you will get it done and it should not take longer that two minutes to complete the process.
Again.... DO NOT SHORTCUT THE INSTRUCTIONS.
Good luck
asfoor said:
No.... there is nothing wrong with your SD card.
Do this:
1. Remove your SD card and your SIM Card. Start your device.
2. Connect your Device to your PC Via ActiveSync. Make sure you are fully connected.
3. Unzip and copy the exe file of attached JumpSPL to your device memory.
4. Run Jump/Soft SPL on your device
5. Wait for the bootloader screen to appear and "USB" to show.
6. Right-click activesync icon on the PC tray, go into connection settings and ensure Allow USB Connections is unchecked
7. Unplug your device from the USB port, wait 5 - 20 seconds, plug it back in.
8. Run KaiserCustomRUU.exe of the desired HardSPL and flash HardSPL3.29
To see if you have successfully flashed the 3.29 HardSPL press the camera and power button and press the soft reset once all at the same time, you will see the four color screen and it should display the SPL version.
Click to expand...
Click to collapse
I did do all that. like I said I followed the instructions to a tee, but when I ran the kaisercustomruu that was included with the hardspl file my comp just shut down.
question: if I run jumpspl and then use the htc update utility to flash hardspl, would that work? (the htc update utility is the update utility that worked when I tried to flash the rom but it just sat at 0%)
asfoor said:
Whether your SD card is locked or unlocked has no barrier on flashing SPL on your device, since you need to have it out of the device when you perform the SPL install.
Fat32 sometimes would not allow operation of certain files on your PC. thats why sometimes PPC programs or files would not open on your PC and would give you error msgs. Now some folks tried to create a virtual fat32 folder that could in some instances open or run fat32 programs that are created for mobile devices, but in most cases that would crash your PC OS and shuts it down. Same story with netCF files.
So in essence if you were to follow my instructions above, you will get it done and it should not take longer that two minutes to complete the process.
Again.... DO NOT SHORTCUT THE INSTRUCTIONS.
Good luck
Click to expand...
Click to collapse
but in the sticky it says that in order to change to cmonex's 3.29 i'd have to flash via SD card. that's why I was wondering how to format it to fat32. but i'll try to do it again and see if it works this time. thanks for the files
my sandisk 8g micro sdhc won't let me delete files, ad files, or even reformat the card
poppinpengawen said:
but in the sticky it says that in order to change to cmonex's 3.29 i'd have to flash via SD card. that's why I was wondering how to format it to fat32. but i'll try to do it again and see if it works this time. thanks for the files
Click to expand...
Click to collapse
can't you read? Why are you doing Cmonex? JUST FOLLOW MY INSTRUCTIONS. hardSPL3.29 is same protocol on both CMONEX and POF and whoever tells otherwise is full of BS. Again.... just follow my instructions..
msd24200 said:
my sandisk 8g micro sdhc won't let me delete files, ad files, or even reformat the card
Click to expand...
Click to collapse
Are you trying to add files to your card by inserting it into your laptop using an adapter?
BTW certain adapters for some reason or another will not allow you to do that after the SD card has been placed and used in a phone.
Can you access the SD card through ActiveSync? If you have installed programs on your SD card and you are trying to delete them from the SD card it would not let you as there is a shared violation in that process. The way to do is that you would need to remove the programs first from your device by using the Remove prompt in your settings page on your phone, then going to your SD card and deleting the program files. If you do it in the reverse order you will run into problems; Remnants of those programs will still reside in your main memory.
The attached is a utility that would help format SD card. DO NOT UNZIP IT. Just create a folder on your PC and save the attached in it, When done, change the file type of the attached file from zip to exe. Then right hand click it and do the extract to the folder you created. Follow the included instructions to format the SD card.
poppinpengawen said:
I did do all that. like I said I followed the instructions to a tee, but when I ran the kaisercustomruu that was included with the hardspl file my comp just shut down.
question: if I run jumpspl and then use the htc update utility to flash hardspl, would that work? (the htc update utility is the update utility that worked when I tried to flash the rom but it just sat at 0%)
Click to expand...
Click to collapse
Wait a second..... Do you have your device CID unlocked? In other words, did you unlock your device using one of the methods in the stickies? I am NOt talking about SPL .... Were you able to flash a cooked ROM on your device?
asfoor said:
Are you trying to add files to your card by inserting it into your laptop using an adapter?
BTW certain adapters for some reason or another will not allow you to do that after the SD card has been placed and used in a phone.
Can you access the SD card through ActiveSync? If you have installed programs on your SD card and you are trying to delete them from the SD card it would not let you as there is a shared violation in that process. The way to do is that you would need to remove the programs first from your device by using the Remove prompt in your settings page on your phone, then going to your SD card and deleting the program files. If you do it in the reverse order you will run into problems; Remnants of those programs will still reside in your main memory.
The attached is a utility that would help format SD card. DO NOT UNZIP IT. Just create a folder on your PC and save the attached in it, When done, change the file type of the attached file from zip to exe. Then right hand click it and do the extract to the folder you created. Follow the included instructions to format the SD card.
Click to expand...
Click to collapse
yeah i've tried adding/deleting pics, vids, music, etc... with phone and pc and neither works, up until a couple weeks ago i was moving pics/vids to and from the card with the ppc and the pc with no problems. i have used several different card adapters in case one was bad but no matter what i have done, nothing has worked. i already even tried the file you sent and couldn't get the sdformatter to work either. i haven't installed any aps to the card only save pics and all on there, keep my fav program cabs on there as well.
msd24200 said:
yeah i've tried adding/deleting pics, vids, music, etc... with phone and pc and neither works, up until a couple weeks ago i was moving pics/vids to and from the card with the ppc and the pc with no problems. i have used several different card adapters in case one was bad but no matter what i have done, nothing has worked. i already even tried the file you sent and couldn't get the sdformatter to work either. i haven't installed any aps to the card only save pics and all on there, keep my fav program cabs on there as well.
Click to expand...
Click to collapse
Sounds to me your 8GB SDHC Card failed if it worked before and isn't anymore. Can you play the music on the card from either your PC or Kaiser?
going crazy
so i've been following asfoor's advice. I ran kaiserunlocker, but none of the steps made any progress. I tried using it to flash spl3.29, but my spl still shows 3.56. I tried flashing the patched radio, but its still the same (1.65.21.18). I downloaded v2.0, so I know I have the most recent version of kaiserunlocker. help! im getting more and more frustrated.
Related
i cant flash thru bluetooth and my usb port on my tilt doesnt work. how can i flash thru storage card?
Make sure you have installed HARDSPL.
Download a rom and rename it to KAISIMG.nbh
Hold down the camera button and soft reset, should bring you to the tri-colour screen. Press power to flash the new rom.
read the wiki for more detailed instructions.
here's the complete, detailed, wiki post:
http://wiki.xda-developers.com/index.php?pagename=KaiserSDFlash
good luck
im using a fat32 micro sd. i renamed the nbh file to KAISIMG.nbh and transferred it to the root of the micro sd. i get the bootloader screen on, it flashes grey quickily and says no image file and then it goes back to the multi color screen.
i beleive it is hardspl, it says SPL-1.0 and i have previously flashed other roms onto the phone.
any help
You need to flash HardSPL.
can i flash hardspl with my storage card?
also, i have previously flashed other roms, doesnt that mean i already have hard spl? the phone is also already SIM unclocked. i could i have sword i did a hardspl.
check by holding the camera button while soft resetting, it will tell you in the bootloader what spl ou have, and let you flash w/ the sd card (but if you need to change the hardspl, you need to use your computer)... read the wiki for directions (sticky for spl directions)
it says SPL-1.0.OliPof
just check that when you format your SD card that it is done as fat 32, and not just fat, as i made the same mistake yesterday..I do all my flashing from sd card, as using vista x64 and its so unreliable i dont want to risk bricking the phone...My mate originally did the hard spl for me, and mine shows 1.0 olipof like yours, and i have no problem flashing now..
I used to find on the Hermes that sometimes I needed to reformat the card and copy the ROM file over again. Dunno why or what changed but sometimes it would just take a few goes to 'catch'
One other thing.
The SD cannot have a Label when you Format it.
Ta
Dave
I'm new to the Kaiser world but have a little experience with flashing from the Hermes side of things. I used to have SSPL-HERM.exe on my 1GB SD card and would add any .nbh file image to the card, rename it HERMIMG.nbh, then run SSPL on my device to start the upgrade. Is there a solution like this for the Kaiser? I checked the wiki, searched the forums and searched the cloud without any answers. I tried using the bootloader reset with the image file (renamed as KAISIMG.nbh) on my card but I keep getting the "image file not found" flashing on the screen, then it returns to the tri-color screen.
I'd stick with running the custom ruu's but my connection keeps dropping off on my work PC before the ROM can flash. And it's just no good to have to wait until I get home to flash a new ROM, right?
Thanks in advance for the help.
live4vball said:
I'm new to the Kaiser world but have a little experience with flashing from the Hermes side of things. I used to have SSPL-HERM.exe on my 1GB SD card and would add any .nbh file image to the card, rename it HERMIMG.nbh, then run SSPL on my device to start the upgrade. Is there a solution like this for the Kaiser? I checked the wiki, searched the forums and searched the cloud without any answers. I tried using the bootloader reset with the image file (renamed as KAISIMG.nbh) on my card but I keep getting the "image file not found" flashing on the screen, then it returns to the tri-color screen.
I'd stick with running the custom ruu's but my connection keeps dropping off on my work PC before the ROM can flash. And it's just no good to have to wait until I get home to flash a new ROM, right?
Thanks in advance for the help.
Click to expand...
Click to collapse
What are you wanting to load, Hard SPL's or ROM / Radio images?
The KAISIMG.nbh on the Root of a FAT32 formatted SD card works for ROM / Radio / OEM SPL's (If SPL override is enabled).
To upgrade a hard SPL (If SPL override is disabled) then you can follow this post from cmonex: http://forum.xda-developers.com/showthread.php?t=420683
Ta
Dave
DaveShaw said:
What are you wanting to load, Hard SPL's or ROM / Radio images?
Click to expand...
Click to collapse
Mostly ROM/Radio images - I've got 3.29.Hard loaded right now and it seems to be working ok.
DaveShaw said:
The KAISIMG.nbh on the Root of a FAT32 formatted SD card works for ROM / Radio / OEM SPL's (If SPL override is enabled).
To upgrade a hard SPL (If SPL override is disabled) then you can follow this post from cmonex: http://forum.xda-developers.com/showthread.php?t=420683
Click to expand...
Click to collapse
My card is formatted FAT32 (necessary for the Hermes flash as well) but I'll give a reformat a shot and see what happens. Thanks for the quick response.
live4vball said:
Mostly ROM/Radio images - I've got 3.29.Hard loaded right now and it seems to be working ok.
My card is formatted FAT32 (necessary for the Hermes flash as well) but I'll give a reformat a shot and see what happens. Thanks for the quick response.
Click to expand...
Click to collapse
If it is just images, just place the KAISIMG.nbh on the root and then enter the bootloader (Camera and SoftReset) and the SPL will do the rest.
Ta
Dave
I tried to reformat the card using flash format but I keep getting an error saying "exclusive access to the storage card is denied (#31)."
I also tried putting the KAISIMG.nbh on the root and resetting into the bootloader but nothing happens.
Without any further suggestions I'll grab a laptop during my lunch and reformat the card in there, then retry the SD card flash.
live4vball said:
I tried to reformat the card using flash format but I keep getting an error saying "exclusive access to the storage card is denied (#31)."
I also tried putting the KAISIMG.nbh on the root and resetting into the bootloader but nothing happens.
Without any further suggestions I'll grab a laptop during my lunch and reformat the card in there, then retry the SD card flash.
Click to expand...
Click to collapse
I use it all the time like this. Just make sure the format is in Windows (not via Resco, etc).
Oh, and I don't think it support's volume labels.
Ta
Dave
Also there have been some issues reported with Kingston 1GB cards not being recognized for some reason. I have a 1GB Kingston and I 1GB Sandisk and after reading the post I never tried the Kingston but the Sandisk works fine.
I formatted my card, dumped the image file onto it, sent the phone to bootloader and still got the same "image file not found".
By some stroke of luck I was able to run the customruu from my work pc after moving to a different USB port, once. Now I keep running into the connection dropoff that I had been seeing in the past.
By the way, the 1GB card I'm using is from ativa...
Must've been the card. I used my 4GB sdhc card with no problems what-so-ever. Chalk one up for Ativa in the these cards may not work for flashing ROM's section.
Thanks for the help everyone.
Most of you have noticed that my ROMs require flashing through the SD card. I've given out the instructions many times, but they tend to be lost in the shuffle that is day to day posting so here is a whole thread dedicated to it:
1. Format your SD card to FAT32.
2. Place HERAIMG.nbh into your SD card.
3. Hold the camera button then press the soft reset button while holding the camera button.
4. Press the down volume when it asks you to press something.
If this doesn't work, it means either:
1. Your SD card isn't fast enough. You can try partitioning the SD card so that it only has a small amount of space formatted. This can be read faster by the bootloader.
2. You don't have a HERAIMG.nbh file in your SD card.
3. Your HERAIMG.nbh was made with a small number in the "version" number.
4. Your SD is a SDHC. The driver that allows SDHC compatibility is not loaded in the bootloader. Buy a cheap little 1GB card to flash with.
3. Your HERAIMG.nbh was made with a small number in the "version" number.
Click to expand...
Click to collapse
That's mean IPL & SPL right?
I read about WM6.1 in this forum require IPL or SPL morethan 4.xxx
But my Herald (Dopod C800) IPL&SPL 1.09.0001
Can you give any advice How can I do for upgrade to WM6.1
Thank you
Newbie from Thailand
pungcheer said:
That's mean IPL & SPL right?
I read about WM6.1 in this forum require IPL or SPL morethan 4.xxx
But my Herald (Dopod C800) IPL&SPL 1.09.0001
Can you give any advice How can I do for upgrade to WM6.1
Thank you
Newbie from Thailand
Click to expand...
Click to collapse
No, when making the NBH you have the option of setting a version number.
In order to flash any third party ROM you need an IPL and SPL of 4.xx and to HardSPL your phone (HardSPL requires an SPL of 4.xx)
To upgrade your SPL and IPL you can try upgrading your phone with it's most updated stock RUU (Some, like HTC bring the upgrade) or you can try the GoldCard method. (Search for the word "Goldcard".)
how can i do this i have a herald 4350 or well the t-wing and i doesn't want to connect to my computer well it connects but 3 seconds later it disconnects i don't know what going on and i been trying to update to another rom. thanks for any help.
ghostnj said:
how can i do this i have a herald 4350 or well the t-wing and i doesn't want to connect to my computer well it connects but 3 seconds later it disconnects i don't know what going on and i been trying to update to another rom. thanks for any help.
Click to expand...
Click to collapse
Just follow the directions I just posted. They should work just fine.
ivanmmj said:
If this doesn't work, it means either:
1. Your SD card isn't fast enough. You can try partitioning the SD card so that it only has a small amount of space formatted. This can be read faster by the bootloader.
2. You don't have a HERAIMG.nbh file in your SD card.
3. Your HERAIMG.nbh was made with a small number in the "version" number.
Click to expand...
Click to collapse
Hi Ivan,
Just to let you know though, there must be some kind of problem. I followed the instructions and flashed through my SD the nbh (os+radio) numerous times but after the flash my Herlad always failed to boot. The flash was successful, I got a message "press any key to continue" from the bootloader and after a softreset the screen was always black with no signs of booting.
Also, just to let you know, the program that opens the htcrt.proj file fails to register and I always had to /right click/open with and then manually select the os and radio files to create the nbh.
papajohn said:
Hi Ivan,
Just to let you know though, there must be some kind of problem. I followed the instructions and flashed through my SD the nbh (os+radio) numerous times but after the flash my Herlad always failed to boot. The flash was successful, I got a message "press any key to continue" from the bootloader and after a softreset the screen was always black with no signs of booting.
Also, just to let you know, the program that opens the htcrt.proj file fails to register and I always had to /right click/open with and then manually select the os and radio files to create the nbh.
Click to expand...
Click to collapse
If it fails to boot, it means that the ROM you created has something wrong in it, not that the flashing process has something wrong in it.
As far as the proj file, if you have windows Vista, it may have not set the permissions properly.
Hi.
I'm fairly new to this and I'm trying to flash a JustMe ROM. I have built both a XPR and a LZX but none of them worked. I just follow your intructions and I get to a screen with gradients of Red, Green, Blue and a white bar in the background and IPL 4.17.0001 and SPL 4.17.0000. From what I understood, something should happen now, right? Well, it doesn't.
What may be the problem?
jantunes said:
Hi.
I'm fairly new to this and I'm trying to flash a JustMe ROM. I have built both a XPR and a LZX but none of them worked. I just follow your intructions and I get to a screen with gradients of Red, Green, Blue and a white bar in the background and IPL 4.17.0001 and SPL 4.17.0000. From what I understood, something should happen now, right? Well, it doesn't.
What may be the problem?
Click to expand...
Click to collapse
You should not see the gradients right away.
If you followed the steps exactly, and your NBH has a version number of 5.2.xxxxx or higher: Then your SD card might not be fast enough or it might be a SDHC which won't work.
How big is your SD card?
It's a 2GB Silicon Power MicroSD. How do I check the version of my NBH?
Also, the NBH is not the only file I have in my card. Do I have to format it or if it is already in FAT32 (which it is) I don't need to?
btw, a message saying something like "Checking SD card" (something like that, couldn't see it right) appears before the gradients but only for 1/4 of second or something.
jantunes said:
It's a 2GB Silicon Power MicroSD. How do I check the version of my NBH?
Click to expand...
Click to collapse
When you CREATE the NBH, it says the version. What number does it say there?
jantunes said:
Also, the NBH is not the only file I have in my card.
Click to expand...
Click to collapse
That's fine.
jantunes said:
Do I have to format it or if it is already in FAT32 (which it is) I don't need to?
Click to expand...
Click to collapse
The reason I mention it is because SD cards come preformatted as FAT16.
jantunes said:
btw, a message saying something like "Checking SD card" (something like that, couldn't see it right) appears before the gradients but only for 1/4 of second or something.
Click to expand...
Click to collapse
That's where the flashing is done. If you only see it for 1/4 second, it means:
1. You didn't follow the directions (FAT32 and version number)
2. The SD card is too slow.
The NBH version is 5.19588.
jantunes said:
The NBH version is 5.19588.
Click to expand...
Click to collapse
Make it 5.2.19588.
Did you format the card to FAT32?
It was already formated. I'll try with this version number.
EDIT: Didn't work. I'll format the card.
jantunes said:
It was already formated. I'll try with this version number.
EDIT: Didn't work. I'll format the card.
Click to expand...
Click to collapse
The card was already formatted to FAT32? Not FAT16?
Yes. It was FAT32 but I reformated it anyway. It now loaded but gave me an "Invalid Certificate" error.
jantunes said:
Yes. It was FAT32 but I reformated it anyway. It now loaded but gave me an "Invalid Certificate" error.
Click to expand...
Click to collapse
So the formatting was still an issue. Weird. Ok, so now it's reading it but it's not validating the certificate. Have you HardSPL'ed?
No, as I don't even know what that is. So far I have only needed the Flash Center application to flash the ROMs.
jantunes said:
No, as I don't even know what that is. So far I have only needed the Flash Center application to flash the ROMs.
Click to expand...
Click to collapse
The Flash Center only works through inserting the code through Windows Mobile. Since my ROMs are flashed outside of Windows Mobile, therefore, it requires a HardSPL'd phone. HardSPL is better than the Flash Center since it protects the SPL and IPL from being overridden in a bad flash or when you accidently use a ROM that isn't meant for your phone. But, the HardSPL can be dangerous is you don't follow the install process properly as it can brick your phone.
Hum, ok. I'm quite intuitive in understanding how to hack devices so don't worry as I'll probably not brick my phone. I'll search for HardSPL and when I'm done I'll post the results.
Thanks for all the help and for your (I imagine) great ROMs.
EDIT: HardSPL'd my phone and everything is working great. Very fast ROM, I may say. Not as good-looking as the Open Touch Project I was using, but sometimes functionality is better than style.
Reassuming:
1) Tried to Update to RC33 my new Gphone and Failed!
2) Tried to wipe and retry the update and fail again.
3) Repeat STEP 2 for some times
4) Try to flash from bootloader with RC29 (DREAIMG.nbh) but fail.
5) Use DREADIAG.NBH that say me: 00028002
6) Qmat 4.24 say me:
a) When I click "Get SD Card Serial from Wince Device" on Omnia i900 [Win Mobile 6.1] the Omnia say: "There was a problem with device.exe"
b) If I continue, then click "Save Goldcard Image to WINCE SD", Qmat show me an Error popup that say me: "Done writing SD card to WINCE Device"
Now my phone is still dead.
Any ideas???
Crying...(while wait your answers...)
when you power on the phone, does it go to bootloader or to recovery? did you have the HardSPL installed already? and do you have a micro SD card reader
The Phone goes ONLY in Bootloader mode.
I have the MicroSD USB reader.
I have the original SPL.
kinda sounds like a bad SD card to me -- did you try another one?
ok, go to the thread that gives you the walkthrough on rooting the phone, and get the RC29 or RC7 from there, if your phone was already on RC30 or above then get the 29, if you were on rc8 or above then get RC7. then you need to format your card in the reader to FAT32. then unzip the file you downloaded a minute ago and rename the .nbh file to DREAIMG.nbh and try again. from the looks of it you had a CID error, though i have never gotten one of those so i don't know exactly what they say. try again to flash the .nbh file in the bootloader
I have change 3 SD card...but the Flash don't work.
Say me:
____________
Update Terminated
UPDATE FAIL
____________
Tuba I have tried ALL the US DreaIMG that I found on the WEB! ALL!!!
But the results is the same...
I have tried to use QMAT but don't help me...
rdware said:
Tuba I have tried ALL the US DreaIMG that I found on the WEB! ALL!!!
But the results is the same...
I have tried to use QMAT but don't help me...
Click to expand...
Click to collapse
Are you using mac to format the sdcard? Sometimes, at least for me, if I format on my mac before putting dreaming.nbh on the card mac will add extra little files to the card that the phone does not like. Make sure to FORMAT the card to Fat32, then copy the file, then do NOTHING else with it before putting it back in your phone and flashing it. Also as stated above, re-download the file to make sure it isn't a corrupted one. If this isn't your case, sorry for wasting your time.
Have you had any luck?
I also have a bricked US G1 with original SPL. I was thinking of using QMAT to create a goldcard image so I could load DREADIAG.NBH since the one I have must be CID locked / for another CID (I get the 00028002).
Thanks.
I have successfully loaded a DREADIAG.nbh for a different CID using a goldcard image. Now, some stuff in there didn't work as expected, and the service manual if a bit short on info in that area. Also, it seems to work with RUU for some things. I'll have to grab a windows box tomorrow and see what I can do there.
How To Guide - Install CAB's - Flash ROM's - HardSPL - Flash via MicroSD
Welcome!
The world of Windows Mobile is glad to see you! There are millions of things you can do with Windows Mobile, and some of the coolest will be described here! Follow the Table of Contents below, or read through the entire page to learn all you can!
Table of Contents
How to Install a Program (CAB File)
How to Flash a Custom ROM (Upgrading to Windows Mobile 6.5)
Learn More about ROM's and Flashing!
USPL Method - Learn More
HardSPL Method - Learn More
Flashing Options
If you want to run one of the many Custom ROM's out there, then you will have to learn how to flash first! To learn more about flashing, click here. You have two options:
USPL - Use this method if you plan to only flash occasionally. This is a "temporary" solution, that simply bypasses the CID security for the duration of the flash. This is not the safest method, but is useful for flashing once in a while! Use THIS PAGE to flash with this method.
HardSPL - This is a permanent solution. Use this option if you plan on flashing a lot. It is also the safest, once you are HardSPL. Also, this allows you to flash LZX ROM's, and flash via MicroSD. Click HERE to flash like this (Non-PDF Version)
More Info on ROM's and Flashing
Steps to flash using HardSPL: (PDF Version) (Written by Apreincher, many thanks!!!!!!!!!)
It is a good idea to flash back to stock ROM just to be safe. If you are using a T-Mobile Wing you can download it from T-Mobile or from this guide. If it's a Herald you can download it from this guide.
It is important that your IPL is 4.xxx or Higher. If it is not, do not attempt a HardSPL it WILL brick your phone. You can find out the IPL by going into Bootloader:
While holding the camera button do a soft-reset by pressing the stylus into the reset hole next to the volume slider. Release the reset switch while still holding the camera button. A colored screen will come up listing your IPL and SPL. If next to IPL it says 4.xxx or higher, proceed to step 2.
Reset back into your normal phone OS.
Go to Settings- Connections- USB to PC and check the checkbox on that page.
Install the 3 CABs in this order:
Canon Yang.cab
ASerg Policies.cab
Disable Security.cab
Soft reset the phone.
Download the HardSPL folder, extract it, and place it on the Desktop.
Run ROMUpdateUtility.exe located in the HardSPL folder. Update the ROM using the steps on the screen. The screen will become white, but wait until the phone reboots itself. It could be 10-15 minutes.
Phone should boot back into some strange looking ROM. This is the HardSPL ROM. So far so good.
Check your SPL by going to bootloader again. If it says 4.70.yang, you are good as gold and HardSPLed.
Okay so now how do I flash after I'm in HardSPL?
There are actually two ways to flash while you are HardSPLed. You can use the flash center method or the SD card method. Most LZX and Micro ROM's require you to flash through the SD card method.
Flash Center with HardSPL:
Open the HardSPL folder and remove the .nbh file that is located in there. Replace it with the .nbh file you downloaded with your favorite ROM.
Run ROMUpdateUtility.exe
You've installed a custom ROM on HardSPL.
Flash through SD Card with HardSPL:
Unfortunately, sometimes this can be a bit more complicated. Make sure you use an SD card and not an SDHC card.
Your storage card will hopefully be lower than 4 GB, or else it might have trouble locating the file. If your storage card is larger, you can partition it to be smaller. Also, no SDCH cards will work.
You must format that storage card to FAT32.
Now, you download the ROM (and uncompress it if it’s a .7z, .rar, or .zip file).
Place the downloaded and uncompressed ROM file (.NBH) into the root of your storage card. Also, you must rename it HERAIMG.nbh. (Captialized)
Put the SD Card into your phone, and with your phone turned on, hold the camera button down. While holding the camera button, press and release the soft reset button. Keep holding the camera button until a new, white screen appears.
If it displays a white screen with blue text that says Checking SD contents and then Update Image proceed to step the next step.
If it immediately goes into the colored bootloader screen, it appears your phone's bootloader is not finding your SD card. Some SD cards require special formatting for some reason. Plug the SD card into your computer using an SD card reading and right click on Computer and click Manage. Click Disk Management on the right pane. Select the SD card from the list and right click and select Format. Under Allocation Unit Size, select 4096. Format and ignore any errors. Proceed with steps 2-4. If it does not work even with this adjustment, your SD card might be too slow. Or you have a SDHC card which isn't easily recognized by bootloader.
This screen that you’re on will have a white background, with blue letters. It will search for your HERAIMG.nbh file, and once it finds it, it’ll give you 10 seconds to answer yes.
To flash the ROM, when it asks you if you want to flash this, press down on the volume slider. Weird, eh? Just do it.
Now, let it flash for a good 10 minutes.
Success! Press any key. Press down on the volume slider again, and you’re on the color screen now. Hold the power button to turn off the phone, and then turn your phone back on. Welcome to your new ROM!
If you are already HardSPL and something happens and flashing doesn't work and you find that your phone appears to be off and won't turn on. Don't panic. Go into Bootloader and use the Flash Center directions to flash a ROM.
Flash Center with HardSPL:
Download the HardSPL folder and remove the .nbh file that is located in there. Replace it with the .nbh file you downloaded with your favorite ROM.
Run ROMUpdateUtility.exe
You've installed a custom ROM on HardSPL.
Flash through SD Card with HardSPL:
Unfortunately, sometimes this can be a bit more complicated. Make sure you use an SD card and not an SDHC card. Also, HardSPL first!
Your storage card will hopefully be lower than 4 GB, or else it might have trouble locating the file. If your storage card is larger, you can partition it to be smaller. Also, no SDCH cards will work. You must be HardSPL first!!
You must format that storage card to FAT32.
Now, you download the ROM (and uncompress it if it’s a .7z, .rar, or .zip file).
Place the downloaded and uncompressed ROM file (.NBH) into the root of your storage card. Also, you must rename it HERAIMG.nbh. (Captialized)
Put the SD Card into your phone, and with your phone turned on, hold the camera button down. While holding the camera button, press and release the soft reset button. Keep holding the camera button until a new, white screen appears.
If it displays a white screen with blue text that says Checking SD contents and then Update Image proceed to step the next step.
If it immediately goes into the colored bootloader screen, it appears your phone's bootloader is not finding your SD card. Some SD cards require special formatting for some reason. Plug the SD card into your computer using an SD card reading and right click on Computer and click Manage. Click Disk Management on the right pane. Select the SD card from the list and right click and select Format. Under Allocation Unit Size, select 4096. Format and ignore any errors. Proceed with steps 2-4. If it does not work even with this adjustment, your SD card might be too slow. Or you have a SDHC card which isn't easily recognized by bootloader.
This screen that you’re on will have a white background, with blue letters. It will search for your HERAIMG.nbh file, and once it finds it, it’ll give you 10 seconds to answer yes.
To flash the ROM, when it asks you if you want to flash this, press down on the volume slider. Weird, eh? Just do it.
Now, let it flash for a good 10 minutes.
Success! Press any key. Press down on the volume slider again, and you’re on the color screen now. Hold the power button to turn off the phone, and then turn your phone back on. Welcome to your new ROM!
If you are already HardSPL and something happens and flashing doesn't work and you find that your phone appears to be off and won't turn on. Don't panic. Go into Bootloader and use the Flash Center directions to flash a ROM.
Waitttt. going for the entire first page...If this turns into what Apreincher wrote up over the summer, then we'll need it!!!
I feel so bad that Apreincher never released all of his incredible guide, lol. He wrote everything up, from installing CAB's to HardSPL, and he wrote it well!
Is there even anyone that hasn't HardSPLed yet??? LOL. Maybe one person, out of the 3 of us, hasn't yet?
Anyone believe in 2012 doomsday? Watching the special TV show on it, and it's soooooo gonna happen! Who's gonna be there on friday, to see the movie?!?!?
I'm sure Ivan will be cooking till December 21, 2012, to the last second of the world LOL.
Done!!!! Post your thoughts.
Sticky??
Maybe this should be stickied Ivan???? It'd kind of answer everyone's HardSPL questions, and then getting HardSPL would be a breeze, thanks to Apreincher's clear and percise instructions!
ace10134 said:
I'm sure Ivan will be cooking till December 21, 2012, to the last second of the world LOL.
Done!!!! Post your thoughts.
Click to expand...
Click to collapse
ROFL. Nah, I might eventually move on to another major project or one of my other smaller projects. Although I'm working on a few things for the kitchen right now. I'm almost done writing this installer/updater that automatically checks the server for an updated version of the kitchen compared to the one you have in your PC. (It actually checks the OEM's, the EXT, the SYS/XIP and the main kitchens files separately and only updates the one that changed.)
ace10134 said:
Maybe this should be stickied Ivan???? It'd kind of answer everyone's HardSPL questions, and then getting HardSPL would be a breeze, thanks to Apreincher's clear and percise instructions!
Click to expand...
Click to collapse
I can add it to my Super sticky. I'm trying to keep the forum tidy (well... the development forum for now as I haven't had time to look over anything else) so I want to avoid many stickies.
Nix that idea. I have a better idea. You guys can take over:
http://wiki.xda-developers.com/index.php?pagename=Herald_Guide
And turn that into the ULTIMATE guide!
ivanmmj said:
Nix that idea. I have a better idea. You guys can take over:
http://wiki.xda-developers.com/index.php?pagename=Herald_Guide
And turn that into the ULTIMATE guide!
Click to expand...
Click to collapse
Cool, I'll port the info into there sometime soon
Need help with flashing ROM from microSD
Hey peeps,
I have been trying to flash my TMo Wing to the Glass ROM, which is the rom I really want to use. I have been trying to flash by microSD. However, even though following the directions to the best of my ability, I have failed. _-_ I only see the 'Searching for card' screen for a second, then surpases to the bootloader screen. I have tried downloading all of Ace's -The Wingster's ROMs for the wing and some of Ivan's as well.
Now my desktop computer died on me recently (damn 8-pin molex connector on my mobo). So my torment has been downloading the .nbh files with my phone. I don't think that downloading by phone would have anything to do with the failure, would it?
I thought it was my microSD card, so I downloaded Flash-Format. I made sure to format my 1 gig card to fat32 with an 8kb cluster.
That didn't work, so I went out and bought another microSD. Formated with the flash-format to fat32 as well. This one is a 256mb.
Now, I was reading in the directions that speed may be an issue. Being that I cant format from the desktop, is it possible to change the speed by using the device itself?
Also I was reading that it is recommended to flash back to the original Tmo Wing ROM. Is this a possible reason that I cannot flash by SD?
I have already HardSPL'd and currently have a HERA1100 ROM WM6.1 Gullum ROM installed.
Thanks for any suggestions,
~Trib
ok iv been flashing for a few months now through flash center and never really had to many issues, well i flashed Big Rom 23081 and have had nothing but trouble, one of them being that i can no longer use activesync.
i went and got one of my smaller sd cards formatted it and put on just stable micro to the root of the sd card, ( did not add any folders) followed the directions of holding down camera button then the soft reset button, well nothing happens at best i get the window that asks me if i wanna turn off my device yes or no and my camera stays on.
is there a roundabout amount of time i hold the camera button before i push the soft reset button, and a amount of time i hold down the camera button before the white screen on.
iv been searching and for the life of me i cant figure out what im doing wrong, the only thing iv read that might make sense is flashing back to the original tmo rom but i cant do that because i cant connect to activesync.
anyone have an idea or suggestion of what to do?
thanks
Tribulattifather said:
Hey peeps,
I have been trying to flash my TMo Wing to the Glass ROM, which is the rom I really want to use. I have been trying to flash by microSD. However, even though following the directions to the best of my ability, I have failed. _-_ I only see the 'Searching for card' screen for a second, then surpases to the bootloader screen. I have tried downloading all of Ace's -The Wingster's ROMs for the wing and some of Ivan's as well.
Now my desktop computer died on me recently (damn 8-pin molex connector on my mobo). So my torment has been downloading the .nbh files with my phone. I don't think that downloading by phone would have anything to do with the failure, would it?
I thought it was my microSD card, so I downloaded Flash-Format. I made sure to format my 1 gig card to fat32 with an 8kb cluster.
That didn't work, so I went out and bought another microSD. Formated with the flash-format to fat32 as well. This one is a 256mb.
Now, I was reading in the directions that speed may be an issue. Being that I cant format from the desktop, is it possible to change the speed by using the device itself?
Also I was reading that it is recommended to flash back to the original Tmo Wing ROM. Is this a possible reason that I cannot flash by SD?
I have already HardSPL'd and currently have a HERA1100 ROM WM6.1 Gullum ROM installed.
Thanks for any suggestions,
~Trib
Click to expand...
Click to collapse
Confirm the following:
You renamed the downloaded file "HERAIMG.nbh"
You extracted the .NBH file, if necessary. Some ROM's come compressed in .RAR or .7z format. You can use 7Zip to extract those.
You do NOT have a SDHC card? SDHC cards won't work.
It should work. Hopefully you can get something going.
livndeadgrl13 said:
ok iv been flashing for a few months now through flash center and never really had to many issues, well i flashed Big Rom 23081 and have had nothing but trouble, one of them being that i can no longer use activesync.
i went and got one of my smaller sd cards formatted it and put on just stable micro to the root of the sd card, ( did not add any folders) followed the directions of holding down camera button then the soft reset button, well nothing happens at best i get the window that asks me if i wanna turn off my device yes or no and my camera stays on.
is there a roundabout amount of time i hold the camera button before i push the soft reset button, and a amount of time i hold down the camera button before the white screen on.
iv been searching and for the life of me i cant figure out what im doing wrong, the only thing iv read that might make sense is flashing back to the original tmo rom but i cant do that because i cant connect to activesync.
anyone have an idea or suggestion of what to do?
thanks
Click to expand...
Click to collapse
You hold down the Camera button, and while you CONTINUE to hold down the Camera button, you press and RELEASE the Soft Reset button. Then, continue to hold the Camera button down until the bootloader appears.
Flashing back to stock wouldn't do ****!
ace10134 said:
Confirm the following:
You renamed the downloaded file "HERAIMG.nbh"
You extracted the .NBH file, if necessary. Some ROM's come compressed in .RAR or .7z format. You can use 7Zip to extract those.
You do NOT have a SDHC card? SDHC cards won't work.
It should work. Hopefully you can get something going.
Click to expand...
Click to collapse
Yes. I have made sure that my card is not a high capacity card.
The file is HERAIMG.nbh on my card (not in any folders).
And its not archived. I think it might be because I do not have the original ROM installed. Can someone link me to the original ROM that Tmo uses on the Wing?
Thanks again,
~Trib
Tribulattifather said:
Yes. I have made sure that my card is not a high capacity card.
The file is HERAIMG.nbh on my card (not in any folders).
And its not archived. I think it might be because I do not have the original ROM installed. Can someone link me to the original ROM that Tmo uses on the Wing?
Thanks again,
~Trib
Click to expand...
Click to collapse
Nah, that doesn't make a difference if you have the stock ROM. Anyways, flashing the stock ROM will remove your HardSPL, soo, you would have to re-do your HardSPL!
I really don't know why it's not working, honestly.
I couldn't take it anymore so I went to my girl's mom's house and just flashed the ROM by Active Sync. I wish I could have been able to flash by sd. Sorry to get off topic, but does anyone else think that it is as agonizing as hell to use the new IExplorer? It loads so slow and takes a lot of time to render when zooming.
Also, what program do I use to have the same on screen keyboard as I did with M2D TouchFLO?
I really have gotten used to that layout.
And lastly, I don't understand for the life of me why the only browser that I use out of IE, Opera Mobile 9.7, Opera Mini 5 Beta and SkyFire, SkyFire is the only browser that is usable. The only one that can utilize the flash player. So what do you guys think,
<Trib