guys just a simple qus-last week i broke my mini-usb than i manage to fix with a help my mate.but the problem is by the usb cable its only charging its not connecting to active sync perhaps i couldnt flash.i have tryed all the mathod.....any ideas why its happning.....cheers...
once i ever in that situation, try to replace your mini usb with the new one.
thanks 4 ur reply.u mean usb cable or port.
'Duke' said:
guys just a simple qus-last week i broke my mini-usb than i manage to fix with a help my mate.but the problem is by the usb cable its only charging its not connecting to active sync perhaps i couldnt flash.i have tryed all the mathod.....any ideas why its happning.....cheers...
Click to expand...
Click to collapse
Have you checked in "active sync" on the connections tab that the "allow usb connections" box is ticked? If so then get a magnifiying glass and check the connections are ok you did.
Regards
Jay
yes mate i have done that.
That can mean just one thing - your USB is improperly connected to the board.
enigma1nz said:
That can mean just one thing - your USB is improperly connected to the board.
Click to expand...
Click to collapse
Hi enigma,
You beat me to it, I was about to say that the socket and /or pcb tracks may be damaged under the socket.
Jay
'Duke' said:
thanks 4 ur reply.u mean usb cable or port.
Click to expand...
Click to collapse
i mean your usb (on uni) not the cable.
Related
I noticed that recently, the phone will charge via USB but will show up as an unrecognized device. No option to activate "mass storage" to connect like it asked before. Tried both with/without Debug mode. Also tried to *#7284# USB PDA->Modem->PDA like i've read somewhere. Didn't fix the issue.
Any ideas?
Thanks!
K5Doom said:
I noticed that recently, the phone will charge via USB but will show up as an unrecognized device. No option to activate "mass storage" to connect like it asked before. Tried both with/without Debug mode. Also tried to *#7284# USB PDA->Modem->PDA like i've read somewhere. Didn't fix the issue.
Any ideas?
Thanks!
Click to expand...
Click to collapse
read this http://forum.xda-developers.com/showpost.php?p=34906725&postcount=6, similiar methods out there as to which tools to use
I just tried. I inserted a toothpick under the usb lid, it did push it up a little and is now centered but it is still not working :/
K5Doom said:
I just tried. I inserted a toothpick under the usb lid, it did push it up a little and is now centered but it is still not working :/
Click to expand...
Click to collapse
not the lid, theres tabs within the usb slot on the phone that u have to fiddle with, if thats what u did then maybe u need a repair shop unless its still under warranty
vincom said:
not the lid, theres tabs within the usb slot on the phone that u have to fiddle with, if thats what u did then maybe u need a repair shop unless its still under warranty
Click to expand...
Click to collapse
Yeah sorry, I think that I used the wrong term. English being my second language, I some times mix up some terms.
Inside the usb assembly, there is the connector with the 5 pins. Pretty much nothing else is there. I lifted the whole connector to make it vertically centered.
Would the issue be coming from a badly soldered connector?
K5Doom said:
Yeah sorry, I think that I used the wrong term. English being my second language, I some times mix up some terms.
Inside the usb assembly, there is the connector with the 5 pins. Pretty much nothing else is there. I lifted the whole connector to make it vertically centered.
Would the issue be coming from a badly soldered connector?
Click to expand...
Click to collapse
yes
My Galaxy S7 keeps disconnecting from USB every time i connect it to my PC a pop up msg says allow access to MTP devices i tap allow then it shows again please if someone can help me with this issue
WeZLi1 said:
My Galaxy S7 keeps disconnecting from USB every time i connect it to my PC a pop up msg says allow access to MTP devices i tap allow then it shows again please if someone can help me with this issue
Click to expand...
Click to collapse
Use a shorter USB Cable.
Or try another USB port. Back panel USB ports may work better than front panel ports.
red6hu said:
Or try another USB port. Back panel USB ports may work better than front panel ports.
Click to expand...
Click to collapse
dark_prince said:
Use a shorter USB Cable.
Click to expand...
Click to collapse
Tried that same issue
WeZLi1 said:
Tried that same issue
Click to expand...
Click to collapse
Another computer?
red6hu said:
Another computer?
Click to expand...
Click to collapse
i don't think it's my computers fault because my dad's S3 just connects fine
WeZLi1 said:
i don't think it's my computers fault because my dad's S3 just connects fine
Click to expand...
Click to collapse
You will never know if you don't try.
Anyway, another idea: try to reinstall the drivers.
Recently had to get my S8+ changed through insurance and now every time i plug it into my win10 PC it isn't recognized. it will charge from the PC but will not display in the my computer section as a device. I've tried a new cable various USB ports turned on USB debugging and downloading drivers. ive also downloaded the smart switch app to PC but it doesn't recognize it either.
any ideas would be much appreciated
thanks
Jim_Bourbon said:
Recently had to get my S8+ changed through insurance and now every time i plug it into my win10 PC it isn't recognized. it will charge from the PC but will not display in the my computer section as a device. I've tried a new cable various USB ports turned on USB debugging and downloading drivers. ive also downloaded the smart switch app to PC but it doesn't recognize it either.
any ideas would be much appreciated
thanks
Click to expand...
Click to collapse
Have you tried to change the the "usb mtp" from notification area?
Change it to "File Transfer" or "Picture" to force PC connection.
samteeee said:
Have you tried to change the the "usb mtp" from notification area?
Change it to "File Transfer" or "Picture" to force PC connection.
Click to expand...
Click to collapse
Doesn't give me the option when plugged into pc. The notification area just displays the charging message. When I press on it it takes me tothe battery settings of device maintenance
Jim_Bourbon said:
Doesn't give me the option when plugged into pc. The notification area just displays the charging message. When I press on it it takes me tothe battery settings of device maintenance
Click to expand...
Click to collapse
Sounds like you're using a power-only cable. Might try other USB cables, especially the one the phone came with.
bpleat said:
Sounds like you're using a power-only cable. Might try other USB cables, especially the one the phone came with.
Click to expand...
Click to collapse
I used the original cable and purchased anew cable but I believe it may not be an official Samsung one I will have to try a new cable and see
Jim_Bourbon said:
I used the original cable and purchased anew cable but I believe it may not be an official Samsung one I will have to try a new cable and see
Click to expand...
Click to collapse
Could also be the PC is not recognizing as a USB device. I forget how to get Win10 to start looking for USB devices again, but recommend you Google variants of "windows 10 does not recognize my USB device". (Shortest: "windows 10" and USB and autodetect")
I fixed this once, forget how.
pc is detecting my old s6 edge but not the s8+. will try a new cable again
Jim_Bourbon said:
pc is detecting my old s6 edge but not the s8+. will try a new cable again
Click to expand...
Click to collapse
Of coarse I am going to ask all the same obvious stuff So you have tried different cables have you tried to make sure there is no trach in the usb type c ends? Also try booting to safe mode and a factory reset of coarse back up with sammy cloud first it does good about restoring most stuff.....
Only other things is drivers again and try other usb ports as well as a different PC.
My be defective device also
By chance does anything come up in device manager?
bpleat said:
Sounds like you're using a power-only cable. Might try other USB cables, especially the one the phone came with.
Click to expand...
Click to collapse
TheMadScientist said:
By chance does anything come up in device manager?
Click to expand...
Click to collapse
Nope
Jim_Bourbon said:
Nope
Click to expand...
Click to collapse
I would contact the insurance company and let them know they sent you a defective one Sounds like you have tried just about everything
Jim_Bourbon said:
pc is detecting my old s6 edge but not the s8+. will try a new cable again
Click to expand...
Click to collapse
That could also be if the S8+ has its USB setting to be (for example) Power only.
I was connectted my phone to my laptop by USB C cable to use my phone's ethernet. suddenly i heard some crackle and burned smell come from my phone's USB port. I am afraid to use USB cable or charge my phone.
Azkelimecokislem said:
I was connectted my phone to my laptop by USB C cable to use my phone's ethernet. suddenly i heard some crackle and burned smell come from my phone's USB port. I am afraid to use USB cable or charge my phone.
Click to expand...
Click to collapse
Thanks for sharing this with us. But since you're not asking a question here, maybe you should just take your phone to a service center.
Hello,
I recently installed the unit.
Tried to connect usb stick to usb 1 and it didn't recognized it.
Tried port 2 and it burned the usb stick!
Did anyone had this problem?
Is it possible to connect the usb to the wrong place at the back of the unit?
Any help would be most appreciated.
What did seller suggest when contacted for support
I'm going to measure the usb voltage and then contact the seller
Problem solved!
It appears to be that the usb 2 and 3 cable can be connected to the canbus connector.
Replaced to the right connector and the problem solved.
Marik d said:
Problem solved!
It appears to be that the usb 2 and 3 cable can be connected to the canbus connector.
Replaced to the right connector and the problem solved.
Click to expand...
Click to collapse
I have the same problem... but what about USB1??? It still not recognizing the USB stick? And do you have photos of the installation?
From what I understand, the 8 pin (canbus) can be used with the 6 pin (USB 2 and 3) , leaving the right 2 pins alone(unconnected)...
That's because the problem I have is that USB1 does charge my phone but there's no data transfer or recognizing USB stick... debugging off and USB configuration is in TRANSFER DATA.... but USB 2 and 3... when I connect my phone it show the charging logo for about 2 seconds... then... it stops charging, also no data transfer or recognizing the USB stick