Related
I recently had my i imate ppc repaired, as it wouldnt charge. Since then i havent been able to use the usb connection, I some how wiped out my wm 2003 rom and have been trying to reinstall it but cant seem to get any futher than the error 101 connection, I have sent the phone back to the repairer and he has said that its a sofware problem, at the moment there is no software on it, I only have the bootloader screen which says, Serial, or USB when the usb cable is connected.
Can anyone out there please let me know if there is anyway i can get the room back on this or ist it a brick.
if the boot loader screen says usb when plugged in, then you CAN flash a ROM, check the forum for whichever your device is
help how do i flash Imate PPC phone edition
Can anyone tell me how to flash an 8imate pocket pc phone edtion, or paste the link to the forum where the information is on here please.
Cheers
Sam
http://www.xda-developers.com/
http://wiki.xda-developers.com/
http://forum.xda-developers.com/
click the first, then click either of the second two, find which your phone looks like and read
Thanks
Thanks for taking the time to help me, will check them out.
Cheers
Sam
ok call me dumb
I have read the information and now im more confused than when i started.
how do i flash this thing. what program do i need to do it. I have found out that it is a Himalaya link http://wiki.xda-developers.com/index.php?pagename=Himalaya.
thanks
Sam
OK, i don't have a Himalaya or a 2003 device, but,
download the original ROM from whoever sold you the phone, flash that to get back to a working phone. no programme required, just dl and run it, then read everything in
http://forum.xda-developers.com/forumdisplay.php?f=243
don't do anything until you fully understand what you are doing and why
good luck
PS, please don't post multiple requests asking the same questions which are almost certainly already asked and answered in this forum,
you'll only aggravate others who can see that you're new & you've still not read enough if you're asking the question, so you're less likely to get a reply.
remember this isn't a help service from your phone company, this is other people who all started the same way you did
Since morning i'm trying to find the link where i can download the WM6 undergroud version. Actually i tried installing WM6 Most beautiful, but i'm getting Update error [302] after 95% of installation. Mine is a G3 phone with IPL 2.26 and SPL 2.26
Thanks
Abhinandan
CID locked!
enggabhinandan said:
Since morning i'm trying to find the link where i can download the WM6 undergroud version. Actually i tried installing WM6 Most beautiful, but i'm getting Update error [302] after 95% of installation. Mine is a G3 phone with IPL 2.26 and SPL 2.26
Thanks
Abhinandan
Click to expand...
Click to collapse
The dreaded 95% error... He's right. Your Wizard is still CID locked.
Follow this thread to get your device CID unlocked and then try flashing WM6 again.
http://forum.xda-developers.com/showthread.php?t=285435
enggabhinandan said:
Since morning i'm trying to find the link where i can download the WM6 undergroud version. Actually i tried installing WM6 Most beautiful, but i'm getting Update error [302] after 95% of installation. Mine is a G3 phone with IPL 2.26 and SPL 2.26
Thanks
Abhinandan
Click to expand...
Click to collapse
i remember the time, when people were able to search info BEFORE stupid moves...now, my dear users, we have dying moloch named internet.
gl.
everbody is lazy now
when i first staring updating my wizard. I read for a few days because I wanted to make sure it was done right. People read one post and then try to flash there phone only to mess it up. I guess they have alot of money to buy more phones.
tomred said:
when i first staring updating my wizard. I read for a few days because I wanted to make sure it was done right. People read one post and then try to flash there phone only to mess it up. I guess they have alot of money to buy more phones.
Click to expand...
Click to collapse
If only we were all so rich... When I first started, I downloaded a WM6 Rom I found on this forum but read nothing... Tried to flash it, phone went to bootloader immediately afterwards and would do nothing else. I called T-Mobile and they sent me to the place on T-Mobile.com where I could get the official Rom download and was able to restore my MDA to life again but not until I had read about 20 different threads, did I attempt it again.
Thats the problem with some people here. They don't read and just assume that because they're a Software Dev that they automatically know everything or think that because they're pretty computer savvy that they know what they're doing or think that because they had their device for a few months that they're automatically an expert... It's annoying to tell you the truth because the only real way to learn is through a lot of reading, or trial and error and thats how everyone here has to learn.
I read this forum for a few MONTHS before I flashed my device, and I'm glad I did. Not only do you have to READ the information, but you also have give it time to SINK IN so that it is fully understood.
There are some people who automatically cry out for help without expending any effort (NOOBE needs help! give me a link, fix this, WAA WAA). And then there are the ones who make this a great forum, they READ READ and REREAD, TEST and RETEST and generally provide knowledge, information and assistance.
All of us are riding on the backs of the mostly unsung developers Like Faria, Bepe and all the others.
joemanb said:
I read this forum for a few MONTHS before I flashed my device, and I'm glad I did. Not only do you have to READ the information, but you also have give it time to SINK IN so that it is fully understood.
There are some people who automatically cry out for help without expending any effort (NOOBE needs help! give me a link, fix this, WAA WAA). And then there are the ones who make this a great forum, they READ READ and REREAD, TEST and RETEST and generally provide knowledge, information and assistance.
All of us are riding on the backs of the mostly unsung developers Like Faria, Bepe and all the others.
Click to expand...
Click to collapse
Exactly,very true cudn't have said much better than this,had sleepless nights,doubts,fears an what if this and what if that happened,read and reread the forums for weeks and posting question,only when as you say 'give it time to SINK IN so that it is fully understood' YUP! GOT IT !!! SMOOTHLY
Dharvey
Dan I'M BACK!! MY WIZARD IS FIXED THANKS TO SOME GOOD OLD FASHION SOLDERING SKILLS...
Hey buddy I'm so pleased you got it done,CONGRATS man
Why the hell do you want Underground????!!!!!!!!
It's old, unstable and has soooo many bugs that have all been resolved in recent ROMs. Have you just had the forum on pda view then jumped at the first WM6 ROM post from the early days?
I'm not interested with the Underground WM6 but when MB_WM6 did not work, i thought of trying that.
I have a question here, i tried installing MB_WM6 and it stopped at 95%, later i tried to install Faria's kitchen ROM and it was successful. I tried unlocking the CID with lokowiz03. Do u people still feel that my phone is still CID locked.
enggabhinandan said:
I'm not interested with the Underground WM6 but when MB_WM6 did not work, i thought of trying that.
I have a question here, i tried installing MB_WM6 and it stopped at 95%, later i tried to install Faria's kitchen ROM and it was successful. I tried unlocking the CID with lokowiz03. Do u people still feel that my phone is still CID locked.
Click to expand...
Click to collapse
Download WST tool and run it,it'll give all the info about your phone to determine the present status of your phone,only than it can be confirmed if it's cid locked or unlocked.
btw,faria's kitchen is for cooking the custom rom according to your own needs,it contains the Base Rom,OEM,RUU... and tools to build a rom.Did you cook your own Rom and flashed ?
joemanb said:
I read this forum for a few MONTHS before I flashed my device, and I'm glad I did. Not only do you have to READ the information, but you also have give it time to SINK IN so that it is fully understood.
There are some people who automatically cry out for help without expending any effort (NOOBE needs help! give me a link, fix this, WAA WAA). And then there are the ones who make this a great forum, they READ READ and REREAD, TEST and RETEST and generally provide knowledge, information and assistance.
All of us are riding on the backs of the mostly unsung developers Like Faria, Bepe and all the others.
Click to expand...
Click to collapse
Well said my friend... This is is how it should be. I think there should be a rule that have to be a member for so many weeks before you can even post and access download links on the forum... This should give you time to read before you make a mistake and brick your phone...
Thanks....i will surely search for WST tool. If u could post the link of the WST tool that will be of great help.
Thanks
Abhinandan
Hey........i found the link and also downloaded it.......thanks for the info
i tried flashing buttons ROM twice. The IPL version and others except SPL got changed to older one....but SPL remained the same 2.21, should itry flashing the buttons ROM again and again till SPL get changed to 1.01
now i installed the Xda_MiniS_LaunchROM_v154102 also even then the SPL version 2.21 only, how shall i change that to older one
enggabhinandan said:
now i installed the Xda_MiniS_LaunchROM_v154102 also even then the SPL version 2.21 only, how shall i change that to older one
Click to expand...
Click to collapse
do a soft reset of your phone , tap with stylus the soft reset button on the phone.the phone will reboot,see if it changes the spl,otherwise flash button's rom 1.05 a couple of more times and then do the soft reset,hope it'll change
Sorry...for posting the same info in a new thread......one more question here how to do a soft reset...is it by using ur WST tool. By keeping the power button pressed it will ask that device will be turned off....is this soft reset...or is there any other way to do
enggabhinandan said:
Sorry...for posting the same info in a new thread......one more question here how to do a soft reset...is it by using ur WST tool. By keeping the power button pressed it will ask that device will be turned off....is this soft reset...or is there any other way to do
Click to expand...
Click to collapse
To perform a soft reset,use the stylus to lightly press and hold the RESET button on the left side of your device,it's a small hole type just underneath Infrared port,you just can't miss it,ok
I simply tried unlocking CID from lokowiz even though my IPL/SPL was 1.05/2.21. I got the below results .....in the result it says CID unlocked, can any senior person have a look at the output say was CID really unlocked
Type the letter and press Enter: C
CID unlocking mobile... DO NOT DISCONNECT UNTIL THE PHONE REBOOTS!
Copying C:\lokiwiz02_173\Utils\itsutils.dll to WCE:\windows\itsutils.dll
CopyTFFSToFile(0x0, 0x10000, lock_backup.bin)
g=16: 314962fa - 121b40d192a81203
Key idx: 16
olddata: 55e9ed9a9ab801da460f100469464259621e8365aeb43277cf2858b925828379
newdata: 95ea23df0bf16432cf7be60912a5cbdedee342037c9d3bd3dee342037c9d3bd3
newsum=f6adec8d encsum=2ee6f10180a5c82d
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
CopyFileToTFFS(cidunlocked.bin:0, 0, 00010000)
result=80072746
Your phone is now CID unlocked....
Store the generated 'lock_backup.bin' file in a safe place. It can help to resto
re your device if anything goes wrong.
ECHO is off.
"Standing on the shoulder of giants"
Ricardo Afonso, 2005
i konw that this is not a Universal forum but, can anyone help me? i got an error 112 Update Error, and i cant just flash anything, just stucks at 7% help please
More detail please...
Isaygarcia said:
i konw that this is not a Universal forum but, can anyone help me? i got an error 112 Update Error, and i cant just flash anything, just stucks at 7% help please
Click to expand...
Click to collapse
Are you at your Tri-Color Screen? If so...tell me what the screen says...also what device do you have a Tilt or a TyTN II
well when i was trying to flash the rom it not recognized it, then i disconected it and then enter in bootloader, and when it was flashing just stucked at 7% and said "ERROR 112 :CE Rom Update Error"
and now i cant flash anything, just stucks at the same 7%
its a Universal i know that it isnt a forum for that device but in the universal one just nobody answers =( and i guess that some people here has 1 uni too
Theres a way to Flash the rom via SD card on the universa?? please help TT-TT
Isaygarcia said:
Theres a way to Flash the rom via SD card on the universa?? please help TT-TT
Click to expand...
Click to collapse
What does your TRI-COLOR Screen say?
it says just usb and v1.0
it tries to flash and then stucks at 7%
new thing, when i try to flash an original rom, it says "error 100: model id error 22-N-50-N-N
please help!!
Can anyone help me please?? =(... i get an error 112, the rom just dont flash, it gets a 7% then the error appears, its an HTC Universal. i tried some things and even no results, theres a way to flash from SD? or it will be the same?? or maybe it got locked or something? or i just bricked it?? it enters to bootloader and it starts to flash and stuck on 7% TT-TT
Did you try a google search? I found this related to error 112...
Thanx, trying possible Fix!!
aahh it doesnt work... please can anyone help more??
tried to install the original stock rom and just wont work.. when the update reaches the CE update just stuck at 7% what can i do???
can i get some help? please =(
i searched on google, and i found that a some peolpe had this problem too, but, the same as me, nobody answers. its time to throw away my universal?
Not to sound mean, but you could try spamming the Universal forums instead of the Kaiser forums. I know there are a lot of people on the Kaiser forums, but we're Kaiser users. Odds are you'll get better information in the correct forums because the people there have the same hardware...just a thought.
close this thread plz
OK,
I have a Universal, and here are some ideas and questions:
1. Give the exact name of the ROM you are trying to use. Do not put "the original one," or "Fred's rom." Put the EXACT NAME of the ROM that you are upgrading to, and a link to it.
2. Stop. Take a breath. Throwing away your Universal will not solve the problem.
3. Give exact step by step description of what happened. Start from, "I was using my Universal with XXXXXXX ROM and the world was fine, and then I downloaded the ROM given in item #1 above. I then did (whatever you did). Continue on. End with "I am now stuch at 7%"
4. I noticed that you are from Mexico. I am from the USA, so some colloquilisms may not translate well. (Plus my Spanish is horrible). Let's just stick to the facts.
To be quite honest, your posts are not helpful, and they sound like a drowning man clutching an anvil (see last Sunday's Dilbert...). It would be more helpful if you could be more forthright and specific as to the issue, and give those wanting to help you as much detail as possible.
I am willing to help, but help me help you.
HELP! I flashed my treo 750 with wm 6.5 and now all I get is screen that says
"This concludes the beta test of the software release. Thank you very much for your time and effert in helping make this a great product for our customers."
"to obtain a newer release please revisit the website that you used to obtain your current beta release."
the problem is I found the software on this site and now my phone is basically disabled and I can't use it for anything at all can someone PLEASE help me either find an older copy of a ROM or the update so that I can use this phone again
Paul
fash a rom from here:
http://forum.xda-developers.com/showthread.php?t=541417
I just ran into this problem too... now I don't know how to flash the phone up or down to any other version of the OS because it simply won't do anything except sit on that screen. No way to ActiveSync, no way to access any menu.
EDIT: nevermind, I figured out I could backtrack the time in a hard reset to get it to still have some functionality.
hi everyone,
iv got a htc touch pro,to be precise it is my first ever smartphone and i have tried to flash and add a new rom to my handset.i read all forums and threads on various sites about how to perform a successful flash and rom.installation of the rom were successful,but my phone does not load up to main screen at all!does that mean my touch pro is bricked????however,i can go to the bootloader and try a hard reset,but that doesnt work either.i have found out that my handset was already unlocked using Olinex.
Please can anyone help me out???im really really stressed out.
many thanks.
Ok, best thing to try is to download the official factory rom.
Start the phone and get it to the boot-loader screen.
Plug it in to your PC and wait for the word USB to show up at the bottom of the phone's screen.
Next run the factory rom installation on the PC and go through the steps. It should hopefully flash fine back to the original OS.
thanks alot,that really helped!!!!you havent a clue how stressed out i was when that happened.anyways,i could do with some more help.since i bought this phone,my net has NOT been working.it was officially branded on vodafone but it was unlocked by previous owner.i have ordered official settings from Htc and o2 themselves and still no result.anyone have any solution(s) for this problem?????
like alot of people have said to me,without net on these smartphones,the TP is nothing!so if anyone has a solution,please DO tell me about it
Many thanks.
I would disagree that without internet smartphones are nothing.... but that's not the point. Do you know which ROM you're using?
Are you using a stock rom? if so, from which company.
Alot of people here have their signature to show what rom/radio/phone (type) they have. it makes it easier for those who want to help to provide answers or suggestions faster and you wont have to get nagged asking the same question everytime
Firstly - slow down!
Not quite sure if you have a problem now or not, and if you do, if its the same as you started with.
From what you have written:
You have read some stuff
You have flashed some stuff
it hasnt worked as you expected
you asked for help on here
you may have flashed some more stuff
you may or may not have a problem still.
No offence, but its pretty tricky to offer much in the way of useful assistance when we dont know what state the phone is in.
Dont panic - enter the bootloader. Note what it says (SPL)
Reset, note the rom & radio versions.
See what works & what doesnt.
Read the forum rules - especially about starting new posts and how to name them (seriously urgent help needed isnt very descriptive). Use the search function to see if your problem has been answered (lots of connectivity issues will have been). If you still are having problems, reply to this post, or make a new one if more appropriate, saying clearly what you have (including rom & radio as appropriate) and what you are stuck with.
Oh, welcome to the forums.