Related
Just wanted to let everyone know NOT to buy these screen protectors... I bought one for my XDA II about two weeks ago and it's real crap.
The visual quality is awesome, sylus is smooth; HOWEVER, the touch screen becomes really hard. You need to tap the screen hard before anything will happen. Also, if you get one spec of dust under the screen, that section of the protector will not stick to the screen and you'll get a big bubble.
Save your $15US
It is probably the placement of the protector thats causing the problem, I suggest you see how close to the edges it is sitting, even a tiny part of the protector tucked under the edge can stop the screen working completely, I have heard nothing but good about this brand.
It's on there perfectly...
I had a G2 lying around for the Siemens SX56 and thought I would give that a try and see if it's any better. I installed it and it was a little too small (tuck wise), so it would move around slightly if you are playing games. I just put a drop of Super Glue in two corners (clean job) and it's perfect.
Awesome considering I only paid $14US for 2!
I have had no problems with the martin fields screen protector. I've tried to order a G2 screen protector a long time ago - waited two weeks and order never came, so I went with the martin fields. To get a real clean job, its good to have a piece of tape lying around - or use one of those Post it flags to remove the dust on the screen or the screen protector.
And putting superglue on your XDA II is insane. I highly recommend not to if you lack great hand dexterity. *imagines self* :roll:
I think it totally depends which you get... G2 doesn't "really" support the XDA II.
haha, yes yes... I used a small needle and everything. YOU DON'T WANT TOO MUCH GLUE, JUST A DROP TO HOLD IT DOWN. remember, you want to remove it later!
Superglue on your touchscreen??? :shock:
I bought MF and I don't have too much problem - other than my clumsy hands.
The tapping hard is not experienced as said here, but compared to without the screen protector (any one, not necessary MF), you need to tap harder & write harder. :roll:
As for taking the protector out and the dust, I learned the hard way -- use scotchtape to stick up the protector, use the scotchtape to stick off the dust, & don't use water or thinner to clean the sticky side -- use the scotchtape and gently peck on the sticky side. :wink:
cheers
I had the WRITEShield before the MFO's, and although they were great, the MFO's are heaps better. I have to say, I find the required touch to be much lighter than the WS's.
Many of the forum users over at MTekk love them too, infact this is the first complaint.
Hope you get your problems sorted...
Dave
I've no problems so far with MF.
No hard touch screen problem...infact its same as before putting on the protector.
The MF is cool....only minor comment is it will get scratch after a while of intense gaming or writing. Comparable with G2s.
The PDA shop recommend me to change it after 6~8 months....depending on the scratch surface.
So far I've not encountered a clear type Screen protector that doesn't scratch.
The ones from Brando Brand are Matt finished but will last forever without a scratch on it.
I let the shop assistant (actually, he is the boss!) fixed the thing for me and it looked like a tedious task to get a perfect job. The screen need to be cleaned, apply it slowly from the top side and if there is a dust spot, remove with cellotape. I couldn't have done a better job than him!
hmm, that's really weird. I have to tap it at least twice as hard on the edges and three times in the center.
At first I thought my LCD was dead, but I removed the protector and the touch does work awesome.
No problems here either. I've been using MF on all my phones, SE P800/900 and now my Qtek 2020. Also tried Brando's protector but it's not too bright, so prefere the MF.
Don't get me wrong, I love the visual quality, but can't stand the touch of it.
Figures they'd come out with it a week before I'm thinking of picking up an Imate Ultimate 8150. But it's out for those of you interested link below.
P3600 Full Body Invisible Shield
http://www.shieldzone.com/item_description/HTCP3600I.html
Nice!! It's listed for the P3600i, but I guess it's exactly the same as the P3600.
Anybody tried it already?? Better than a regular silicon cover?
How does this work?
If it is stretched all over the PDA, how is it joined/sealed? What about removing the batter cover or using the thumb wheel? Is it fixed like cling-film?
Also, the screen is recessed from the surround so if it is stretched around the housing and screen, then there would seem to be a gap between the screen and this cover, so what will the sensitivity of the screen be like?
PaulusUK said:
How does this work?
If it is stretched all over the PDA, how is it joined/sealed? What about removing the batter cover or using the thumb wheel? Is it fixed like cling-film?
Also, the screen is recessed from the surround so if it is stretched around the housing and screen, then there would seem to be a gap between the screen and this cover, so what will the sensitivity of the screen be like?
Click to expand...
Click to collapse
If you followed the link and watched the installation video showing it being applied to an ipod you wouldn't have asked.........suggest you try that first.
Andych said:
If you followed the link and watched the installation video showing it being applied to an ipod you wouldn't have asked.........suggest you try that first.
Click to expand...
Click to collapse
looks like it would be a least 3 pieces - one for the screen, then one for the keys, and one for the back - which does not protect the sides. And the video doesn't show how it fits on the phone, it shows how it fits on the front of a ipod - so don't be a smart a*s. He was asking how it fits on this phone not an ipod dumb a*s.
earl00 said:
looks like it would be a least 3 pieces - one for the screen, then one for the keys, and one for the back - which does not protect the sides. And the video doesn't show how it fits on the phone, it shows how it fits on the front of a ipod - so don't be a smart a*s. He was asking how it fits on this phone not an ipod dumb a*s.
Click to expand...
Click to collapse
Get life....yes the clip shows it being fitted to an ipod......if you gothered to watch the clip you would have seen that the piece for the back also does the sides as they wrap around.....apart from the size etc the actual method of applying this will be the same.
Next time smart a*s do your homework rather than mouthing off.
Oh yes all my questions answered if only I had watched the ipod video.
Now All I need is an m700 that is exactly the same shape as an ipod, with all the buttons in the same place, with a flush screen, and well, all very ipodish, and then it will all be clear.
So this will be no more than a screen protector on the PDA. It will not protect the buttons or lower raised section of the housing. Also won't protect the sides (too many buttons), and it seems that the tight curves will be a problem for this cover. I can see this peeling off the m700 in a very short time
If you know so much about it, then can you explain how it will work with a recessed screen? Will I be able to tap it all over with a key and not damage the phone, and if I throw it in a box of coins, will all the phone be safe from scratches and chips - just like the ipod?
PaulusUK said:
Oh yes all my questions answered if only I had watched the ipod video.
Now All I need is an m700 that is exactly the same shape as an ipod, with all the buttons in the same place, with a flush screen, and well, all very ipodish, and then it will all be clear.
So this will be no more than a screen protector on the PDA. It will not protect the buttons or lower raised section of the housing. Also won't protect the sides (too many buttons), and it seems that the tight curves will be a problem for this cover. I can see this peeling off the m700 in a very short time
If you know so much about it, then can you explain how it will work with a recessed screen? Will I be able to tap it all over with a key and not damage the phone, and if I throw it in a box of coins, will all the phone be safe from scratches and chips - just like the ipod?
Click to expand...
Click to collapse
Lets get this straight....I haven't used this product...however when I saw the "link" I went to the manufacturers site to get a better understanding of it....
I watched the video and while it was of it being fitted to an ipod I got a basic understanding of how it could be fitted to a P3600i.
I didn't think it was "cling wrap", I understood that there would be several sections involved....including one for the recessed screen (yes, just like a normal screen protector) and I too would be skeptical of it protecting all parts of the phone.
There is a tendency in these forums for people to not search out information but to ask seemingly dumb questions.....
As this product is new for this model....why not just ask if anyone has tried it or ask the manufacturer for more information.....or is that too hard to do????
NOT FULL BODY...JUST SCREEN ONLY
The site says full body not Screen only, that's a separate option...
I would really like to know if and how exactly this works on 3600.
I actually have silicon case and screen protector for mine, but this would make it considerably smaller...
Bought and use the InvisibleShield
Folks,
I bought it and had it send to Holland. Took about 1 to 2 weeks but ok I am not in a hurry.
The full body covers basically all the shiny black plastic plus the screen. The rest (middles of the sides and the front keys) are not covered. Also offcourse the camera, speakers etc are not covered. However, and this is probably the difference between P3600 and P3600i the front camara is covered by the shield blurring the image. Now I have already put it on the camera but the next time I would use a hole puncher to add the extra hole. I probably will use a sharp hobby knife to cut an extra hole (on the other hand I never use video conferencing).
The plastic is more stronger and thicker then normal screen protectors. Haven't tried to scratch it on pupose and guess what I am not going to do it. If a scratch forms by accident I will mention it here.
The screen takes some getting used to with the new cover. The plastic does not "slide" as easy as the original screen protector or the screen itself. Maybe this is just in the first period.
The application process it pretty easy if you just take the time. Takes about 30 minutes if you do it slowly. Only 2 minor bubbles on the back but those are not really an issue, the rest is perfect.
Hey for 20 euro's I think it is a good deal. No horrible rubber case or GPS blocking metal case for me anymore. Only downside is that if the phone is dropped now there is no protection. This is only against scratches.
Lifetime guarantee so lets see how often I have to send it back.
All in all recommended so far (but that is just after 1 day of use)
I want to see it
Post a picture please
Isn't it invisible?..
See the invisible sheet
Well actually it is quit difficult to see but here are some picures. The picture from the side shows you some edges.
Edges
The edges that you can see in the pic don't seem to line up perfectly, how were the dimensions on the rest of the edges?
i've been thinkin of getting one of these since i saw them for ipods but that messy edge is scaring me away a little, also how are you finding the screen protector after a little more use?
Edges reply
Well the edges are more because of my talent I think. The reason why I showed you this is because at least you can see something. For the rest it alligns perfectly.
After using it for a while it still seems a great product. I accidentaly dropped the thing but no scratch at all. What you do notice is the slightly more pressure you need when using the stylo. Also the screen protector is not as smooth as the original screen making the sliding a little more difficult. Also the plastic sticks to your ear while calling. But all in all still recommended.
I just put it onto the white one...
...and it is invisible. You can see it only on buttons' silver surrounding, on white parts only the edges are visible if you try really hard. I haven't got a good enough camera to show it, sorry.
It has a sticky feeling about it (maybe needs to dry more?). I don't like it on the screen - feels sticky and thick. I'd say use a decent screen protector instead.
It came WITH the cut-out for a camera (it's 3600i shield, I've got 3600), so it fits like a glove.
Oh, it's not a stress-free, low pressure 15 minutes application like they advertise it. It's fekkin pain in the ar$e one hour job, you're swetting your ar$e off. And - I guess - you can never get it perfect at the end. There will always be a bubble or misaligned edge somewhere (or is it me?).
Long term use review to follow.
sabestian said:
...and it is invisible. You can see it only on buttons' silver surrounding, on white parts only the edges are visible if you try really hard. I haven't got a good enough camera to show it, sorry.
It has a sticky feeling about it (maybe needs to dry more?). I don't like it on the screen - feels sticky and thick. I'd say use a decent screen protector instead.
It came WITH the cut-out for a camera (it's 3600i shield, I've got 3600), so it fits like a glove.
Oh, it's not a stress-free, low pressure 15 minutes application like they advertise it. It's fekkin pain in the ar$e one hour job, you're swetting your ar$e off. And - I guess - you can never get it perfect at the end. There will always be a bubble or misaligned edge somewhere (or is it me?).
Long term use review to follow.
Click to expand...
Click to collapse
Any update to report? I'm thinking about buying one and would like your oppinion since you've now had it for a while.
Dimitri- said:
Folks,
I bought it and had it send to Holland. Took about 1 to 2 weeks but ok I am not in a hurry.
The full body covers basically all the shiny black plastic plus the screen. The rest (middles of the sides and the front keys) are not covered. Also offcourse the camera, speakers etc are not covered. However, and this is probably the difference between P3600 and P3600i the front camara is covered by the shield blurring the image. Now I have already put it on the camera but the next time I would use a hole puncher to add the extra hole. I probably will use a sharp hobby knife to cut an extra hole (on the other hand I never use video conferencing).
The plastic is more stronger and thicker then normal screen protectors. Haven't tried to scratch it on pupose and guess what I am not going to do it. If a scratch forms by accident I will mention it here.
The screen takes some getting used to with the new cover. The plastic does not "slide" as easy as the original screen protector or the screen itself. Maybe this is just in the first period.
The application process it pretty easy if you just take the time. Takes about 30 minutes if you do it slowly. Only 2 minor bubbles on the back but those are not really an issue, the rest is perfect.
Hey for 20 euro's I think it is a good deal. No horrible rubber case or GPS blocking metal case for me anymore. Only downside is that if the phone is dropped now there is no protection. This is only against scratches.
Lifetime guarantee so lets see how often I have to send it back.
All in all recommended so far (but that is just after 1 day of use)
Click to expand...
Click to collapse
Same question for you... Any updates? Thank you...
Definately recommended
After using it a few months I still think it is definately worth the few euro's. Ok it sticks a bit when calling for a long time and I think I even managed to get a small scratch on it but I sort of abuse the fact that I have the shield. Store it with keys, never use a case etc.
No I have bought some useless accessoires such as aluminium case (blocks GPS) and the remote for mediaplayer but the shield I would really recommend.
Cheers,
Dimitri.
Well, overall, I think the build quality of the Touch Pro is wonderfull! I love that its slightly heavy too!
But the keyboard slideoutmechanism, although very solid and robust gives away a worrying noise, sorta like its scraping against something. Anyone managed to confirm if this is nothing to worry about? I feel like I damage the device each time I pull it out.. lol
Regards
According to me that's the LCD flatcable cover sliding into place. With the device opened you'll find a little latch of sorts at the top of the screen back, that slides shut when opened and opens up to give the LCD flatcable some room to roll itself up in.
Nothing to worry about then!
(Couldn't think of a more descriptive title, sorry!)
I have an Ultimate Shield tempered glass protector on my z3. It's on pretty much perfectly (very slightly offset but only by 1mm or something so I'm happy with it). It took me a week or so to pluck up the courage to actually put the thing on because I went through a few non-tempered glass ones and was never happy with dust or bubbles. Whilst applying it I started a very brief attempt at moving it into place but decided it wasn't worth the risk but I'd already lifted the corner of the protector and it's not quite flat. Can anyone think of any way of getting this corner to stick down properly? Perhaps slide something underneath it to apply some sort of glue-like stuff perhaps? It's not worth another £10 for a replacement but if there's a trick I can apply to fix this one I'd love to hear it.
Speaking from experience: just leave it at that! I've gone through many glass protectors and I always reapply them to get them aligned perfectly and I ALWAYS end up getting uneven parts. Whenever I'm happy with the alignment I just let the uneven spots be there and they will disappear within a few weeks. The key is really just leaving it just the way it is, the more you try to fix it the more you're going to mess it up and the longer it's going to take to fully adhere to the display. So yeah, just don't do anything about it and the problem will fix itself.
Hi all, I'm in the unfortunate situation that I need a new screen for my Pixel 3. Screens are hard to come by but I found KR-NET who sells screens for most phones including Pixel 3.
Any one have any experience with them? Seems like the only option for now but don't want to end up with a subpar display.
Well, I went ahead and bought it. It arrived today and my phone is fully apart. Now I can't figure out how to take the screen itself off! Teardown videos just say it's "securely adhered" (https://www.ifixit.com/Teardown/Google+Pixel+3+Teardown/113763) or skip over this step entirely (like in this Pixel 3 XL video https://www.youtube.com/watch?v=-Ffn4GQpgSU). Any ideas on how to get the old screen off?
Alright, well I just winged it and figured it out. Everything is working now. If anyone is interested, I can post more info. It wasn't terribly difficult but here's my lessons learned. . While I've never taken apart a phone (or anything that wasn't intended to be disassembled/is sealed shut), I'm generally comfortable with assembling electronics. It's not for the fainthearted, do this at your own risk. According to some sites, Pixel 3 has a very low repairability score because of how difficult it is.
Now that I've done it, the only reason a full disassemble is required is to route the display ribbons through the back. If you can find a way to do this, you probably only need to take off the wireless charger and loosen other things a bit.
Make sure the top speaker flex cable is through the motherboard before securing. It's easy to miss, unlike the other flex cables
Get a screen replacement kit that includes precut adhesives for battery and back cover. (Mine didn't)
Take pictures along the way to remember how things go. There are no good tutorials online with this detail
One of the front cameras has a seal that doesn't handle the process well. Mine made it but probably not as good as new
Somehow track which screws go where - beyond just pictures. I ended up with 1 extra screw and extra clip?
PATIENCE! - things break easily. Don't force parts or screws. When prying, do it gently
Be careful with the speaker mesh covers. Not sure if I did mine right but they do not come with any kit that I know of so don't break or bend them or forget to install them before you adhesive the screen on
Make sure to test that everything (phone speaker, bluetooth, bottom speaker, fingerprint, squeeze mechanism, all cameras, charging, flashlight, etc) is working before sealing it up
I managed to break my earpiece speaker somehow so now I'm on the hunt for one of those. At least speakerphone and Bluetooth work!
How's the display?
Does it seem legit, any tint etc?
Was it manufactured by lg?
No issues, can't tell any difference from original. For $80 can't complain vs $280 to get it fixed somewhere. It would be worth a few more $ to get the precut adhesive though.
It's branded as KR NET, seems they make them on their own? Not sure really. Since Google isn't making screens available yet for repairs, this seems fine. Literally would never know.