Related
Hi,
ok I'm a lil bit desperate right now
I got my XDA II mini today and saw an update on the o2 site and started installing it .. only to notice that it was for the XDA II and not the mini. So, this thing killed my boot rom. I then found your guys site and installed GER_11201_150_11210 RUU package which went fine ... but well, that thing is for T-Mobile and I don't want my xda to be pink
So, I was looking through the forums to see how I can get my original image as I couldn't find an O2 RUU package. So, I tried the ntrw.exe write to SD card (512MB) thing. Inserted it in my xda, did a soft reset and then a hard reset. In the display serial shows up... but I never get it to ask me Press Power to Flash ...
so a) what am I doing wrong an b) how do I get the german o2 image back on my xda?
thanks
ok I understand now why the SDCard update doesn't work .. because I didn't have a chance to backup my boot rom :/
Where can I get a GER o2 boot rom installer that works on my device?
alright, I installed the 1.12 WWE exe package with the help of MaUpgradeUt_noID.exe
... copied the existing boot rom to sd card, and extracted it from there. Overwrote the first 416 bytes in O2_GER_1.12.01_big_storage.nb1 with those of the extracted image.
Now, it's flashing with the SD card ... I'm confident that it'll work, we'll see
ok, the flashing worked ... but O2_GER_1.12.01_big_storage.nb1 is not really O2???
So, where do I get the real o2 boot image?
As much as i know it´s included in the ExtRom....
You can install it manually.
Don´t know who, but someone uploaded "Promasters Autoinstaller 1.5.zip" to the ftp. Very nice application. I would suggest you try/use it. There is an Option to change the bootlogo...
Regards
Stefan
you have to install the extended rom manually!
check the ftp
Hello guys...
Iam not new, and i have already flashed my first(it was wasted not by my fault)KAISER, it was one year ago and i did it with HARDSLPv1, and lately added some new roms cooked by sakajati(respect)...
Yesterday i bought new one(but one year old) so i tried to flash him as well, i have used HARDSPL 1.93, and then i tried to put Sakajati"s 4th feb ROM, but i come across one big trouble, everytime i try to put it on i encounter the same RUU error:
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process. Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue. Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.
what to do...????
i am very afraid that i destroyed my Kaiser...???
what it means that Wince is destroyed...
Please help me, i am desperate...
Iam not new,
Click to expand...
Click to collapse
But the solution could be found here (search)
If you see the tri color screen everythng is ok, just win mobile is destroyed. Try to flash a rom from your sd card
Thank you very much...
I hope it will work, i really did search for about an hour and tried to put rom on sevral times, but i didnt find nothing 100% secure, i dont want to indanger the unit any more that i did...
thanks again, i will try it tommorow morning at my job, thats where my SD card is...
)))
greganovak said:
Thank you very much...
I hope it will work, i really did search for about an hour and tried to put rom on sevral times, but i didnt find nothing 100% secure, i dont want to indanger the unit any more that i did...
thanks again, i will try it tommorow morning at my job, thats where my SD card is...
)))
Click to expand...
Click to collapse
Part of the problem is that 1.93 is a jump spl and should be used to upgrade to Hard spl 3.29 or 3.56, not as an spl on its own. You need to run jump spl 1.93 from your device and make sure you are connected to your computer, when you see the bootloader you need to unplug your USB, count to 10 and plug your USB back in then flash a hard spl to your phone! Again 1.93 is not a Hard Spl by itself, it is only a middle man to flash a Hard Spl.
I think the best would be to flash a stock rom at first, cause therefore you don't need an other bootloader. Then flash Hardspl (3.29 if you have a kaiser or 3.56 if you have a tilt) and then flash any rom you want
i obviusly have a lot to learn, mate how do I asses if I have TILT or KAISER, what is the main difference...
[email protected]: i have already DL the stock rom before i posted the tread, i hoped on that resolution if there were no answer...
in about 10 hours from now i will get my hands on my tilt/kaiser and hope to arranged the mess i done; I drop by in any case at that time and notify you about condition and my successes...
p.s.:sorry for my poor english...
greganovak said:
i obviusly have a lot to learn, mate how do I asses if I have TILT or KAISER, what is the main difference...
[email protected]: i have already DL the stock rom before i posted the tread, i hoped on that resolution if there were no answer...
in about 10 hours from now i will get my hands on my tilt/kaiser and hope to arranged the mess i done; I drop by in any case at that time and notify you about condition and my successes...
p.s.:sorry for my poor english...
Click to expand...
Click to collapse
It realy doesnt make that much of a difference, I have a tilt and I use 3.29 and I would recomend it to anyone over 3.56 so flash either one, they will both work! And your english is great so no need to say sorry!
greganovak said:
i obviusly have a lot to learn, mate how do I asses if I have TILT or KAISER, what is the main difference...
[email protected]: i have already DL the stock rom before i posted the tread, i hoped on that resolution if there were no answer...
in about 10 hours from now i will get my hands on my tilt/kaiser and hope to arranged the mess i done; I drop by in any case at that time and notify you about condition and my successes...
p.s.:sorry for my poor english...
Click to expand...
Click to collapse
A Tilt is a At$T branded Kaiser, a TyNT II is a HTC branded Kaiser. Tilt has a different keyboard and OEM rom., only differences. People say use 3.56 if you have a Tilt because that is an AT$T Spl, but I use 3.29 on My Tilt and it works great so it doesn't really matter.
hey...
nothing seems to work...
I have tried to put default rom dl from here: http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs but the problem is that it is not bootable from SD, that has to be because the USB conection isnt on (i selected the 3.34.721.2) so i given up that way
Then i flashed the HARD spl 3.29(have kaiser) via SD steb by step first with this instruction: http://forum.xda-developers.com/showthread.php?t=433835; and it dint go through
so i tried with this instruction: http://forum.xda-developers.com/showthread.php?t=420683
it didnt work either, they are the same I know(noticed later);
So problem is that i stuck at WHITE screen that says "LOADING..."
nothig else...???
finally i manage to load/boot the htc rom from xda-wiki site, but i have to chose another one
I have tried to put default rom dl from here: http://wiki.xda-developers.com/index...me=Kaiser_ROMs but the problem is that it is not bootable from SD, that has to be because the USB conection isnt on (i selected the 3.34.721.2) so i given up that way
Click to expand...
Click to collapse
Hey man, nice to see that your device rewakes, you can flash every rom from sd card, simply rename the nbh file to kaisimg.nbh than restart into bootloader and it will automatically take the one from the card
Unfortanly, althought i would like you to be right, you are not. When i tried to do it via SD, i stuck at white screen saying LOADING...(blue) and nothih further... and i tried also the Cmonex_s Hard SPL3.29_SD which also stucks at same screen
So now (after updatig with default rom) that i have basicly normal working device i startet from the top. Using @mskip"[email protected] tutorial called: Flasing your first rom (for noobs); it all goes well, till i start to update RUU(sakajati 4 feb) if it matters, and i tried both (spls 1.56 and 1.93), it stops updatig at 17% and notrhin else then works just puting back the HTC default rom from wikiXDA side(thank god for that)
i am thinking of MTTY, although i dont know what it does guys here almoste all say it fix bad rom flash, but i am not sure if thats my main problem, i rahter think it has something with spls...
if someone has some good advice i will be very grateful...
greganovak said:
Unfortanly, althought i would like you to be right, you are not. When i tried to do it via SD, i stuck at white screen saying LOADING...(blue) and nothih further... and i tried also the Cmonex_s Hard SPL3.29_SD which also stucks at same screen
So now (after updatig with default rom) that i have basicly normal working device i startet from the top. Using @mskip"[email protected] tutorial called: Flasing your first rom (for noobs); it all goes well, till i start to update RUU(sakajati 4 feb) if it matters, and i tried both (spls 1.56 and 1.93), it stops updatig at 17% and notrhin else then works just puting back the HTC default rom from wikiXDA side(thank god for that)
i am thinking of MTTY, although i dont know what it does guys here almoste all say it fix bad rom flash, but i am not sure if thats my main problem, i rahter think it has something with spls...
if someone has some good advice i will be very grateful...
Click to expand...
Click to collapse
Hi,
I couldn´t flash my Kaiser via SD at the first time and tried something that worked.
The SD´s are formatted in Fat16 usually, try to format to Fat32... It seems like a stupid thing, but worked for me.
Reagards and good luck.
SD must be formated FAT32, to work, also I sugest a smal card, 512 or something like that, SHDC usual doesn't work
I have 1GB SD and its not shdc, so thats ok.and i have done it right now, like you two guys said so i formated it with FAT32 but still no succes.
I guess that this tree lines in red/green/blue screen arent right:
KAIS130
SPL-3.02.0000
CPLD-8
i thing this SPL has to da something to do with all this mess a have done
I have flashed a couple of roms( i had three devices) and i flashed a few for my friends and all was OK till now, and i dont know what else to do...
greganovak said:
I have 1GB SD and its not shdc, so thats ok.and i have done it right now, like you two guys said so i formated it with FAT32 but still no succes.
I guess that this tree lines in red/green/blue screen arent right:
KAIS130
SPL-3.02.0000
CPLD-8
i thing this SPL has to da something to do with all this mess a have done
I have flashed a couple of roms( i had three devices) and i flashed a few for my friends and all was OK till now, and i dont know what else to do...
Click to expand...
Click to collapse
Yes, you still have a stock spl on there. It needs to be hard spl'd before you flash anymore. Check out the stickies at the top of the forum.
hi again...
Well, I respect the "rules" of forum, thats why i wouldnt ask for insructions that are already written(thanks for the authors) with that i mean stickys, because i read them, almost all...
But I still tried once again, and I came across the same thing, i stuck at 17% when loading RUU or if i choose the VIA SD i stuck at white screen with blue text saying (LOADING...)...
nothing else helps than loading the dafault ROM by HTC... as i already said once again...
if i manage to solve the problem i will be in touch; what do you thing about MTTY
Edit 1:
i have done everything as it says in the instruction, and just like some of you "replyed" me...
but i always stuck at 17%when loading RUU, when i flash it with SPL 1.56 or 1.93 i never get stuck at white screen it always apeare the mentioned SPLs nimbers and some other text in yellow but when i then load RUUs i stuck at excatly 17% nothing less nothing more
edit 2:
yupi....yupi
i made it...
http://forum.xda-developers.com/showthread.php?t=354061 here is my lifesavior...
those instruction were the one that helped my problem...
it is very nice to ba a part of this community....
After loading the Stylez Black v.4 WM6.1 21051 D3D 101MB Full rom my phone give some problems, so i want to go back to the T-Mobile ROM.
But when i am trying to get this rom on the phone with this help i get now the ERROR [244] : INVALID MODEL ID warring, and looked with the search here but i get a lot of different options soms topics are more than 2 years old and that is not working.
So, what can i do to load a new rom or how do i get the orginal rom back on the phone?
plz help....
Thanks in advance...
Maybe this can help you http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser
Or this too http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs
No solutions found...
Anyone ?? Please?
Hard-SPL bypasses Vendor Model check so shouldn't have any problem flashing any stock ROM have you tried others? Try and flash a HTC or AT&T stock, just a bizarre thing as everyone flashes stocks at some point especially if nearly brick and peeps generally flash stocks to bypass 6.5 hard-reset issue.
Can you go into bootloader and reply with Hard-SPL you have?
Also another way is to try flashing via SD, info in the flashing for noobs guide in sticky.
Same Issue
Hi,
I also use Hard SPL to flash new ROMs, however i also face the same issue with certain roms, currently i remember i has similar issues with ATNT rom.
Ok, or i am a realy noob or i doing somthing wrong...
Now when ik start the phone i get the Tri Color : (Red, Green, Blue Screen)
I did a hard reset en now the phone shows the boot screen (Stylez)
When i take the batterij off and put it in after 20 secs again or the tri color or the boot screen is loading or the screen is black.....
Please don't say that i can trow him into the trash...
All you have described there is normal. Now just follow the noobs guide to flashing in the sticky and do everything it says word for word. If the usb method doesnt work then use the sd card way.
stuntdouble said:
All you have described there is normal.
Click to expand...
Click to collapse
Ok, best news this week for me...
stuntdouble said:
Now just follow the noobs guide to flashing in the sticky and do everything it says word for word. If the usb method doesnt work then use the sd card way.
Click to expand...
Click to collapse
Sorry but i want to be shure, you mean this topic?
And if so, how do i load the rom?
Because the phone is not starting up normal,...
If you want i can make screenshots from the pc and make images so you can see?
Sorry for this noob questions....
Yes that is the thread I meant. So did you follow all that was said to do in the link about kaiser stuck at tri colour screen bootloader?
Ok, tryed but with the boot screen and with the Tri Color screen i can not make any USB connection with MTTY, when i start the kaiser with the camera button and with the powerbuton i can connect (USB is also an option (COM1 and COM2 also)).
But is this a correct move?
*contacted user via MSN*
Also tried several steps using the SD card but the phone will still hang into the tri-colour. It says loading, but won't reboot or do anything else.
Suggestions are still open.
FYI: It's a branded phone and wasn't CID-unlocked before. (Still not AFAIK)
Hi everyone i am new here i just recently upgraded from a g1 to the touch pro 2 i have loaded the hardspl and newest radio but i cannot get a custom rom installed i have followed all the steps when i try ove computer it always says my ruu cannot open my rom and when i try by sdcard the bootloader screen starts to load sum #"s pop up but then it aborts and i think it says no file found or sumthn like that i have renamed the file RHODIMG.nbh and nuthn...can someone please help? maybe direct me to an custom ruu for a gsm..i would greatly appreciate any help...thank you..
Welcome to forums
Have a deep read here:
http://forum.xda-developers.com/showthread.php?t=550540
Only if your Rhodium is GSM!
If its CDMA enter to proper section
Hope it helps,
i have gone thru it step by step and have the hard spl-0.85. 01 iNex, my radio is 4. 49. 25. 57...iven even used the custom ruu that is provided in the thread but it doesnt seem to work with any of the roms ive downloaded from here...and when i go thru sdcard it starts loading then i get a string of numbers at the top of screen 0068sumthn and then just stops and says nomfile i believe it switches really fast my card is formatted to fat 32 but nuthn...i really wna upgrade to another rom im really into it i have upgraded to wm 6.5 and it worked with the shipped ruu...if u could direct me to sum roms that have a ruu in the same folder id greatly appreciate it...and THANK YOU VERY MUCH for responding i didnt think id get one...
Hello, i've got problem with my GPS so i would like to reflash radio. The file i found in "athena upgrading" section doesn't work. It says to me wrong version. Is there a spécific file for X7510?
Thank you very much.
x7510 Radio Download here
Thank you very much Vico!
When i flash radio does it hard reset my system? I mean erase my file?
In your wonderfull rom is radio included?
Thank you.
wernervw said:
When i flash radio does it hard reset my system? I mean erase my file?
Click to expand...
Click to collapse
I really doubt that it does a hard rest. Since its only radio flash, but I haven't tried.
wernervw said:
In your wonderfull rom is radio included?
Click to expand...
Click to collapse
Thnxs for the complement , no its not included in my rom's. The reason is, that theres no points in reflashing radio rom, unless you have a problem, since the OS update does not affect radio.
Need X7510 radio 1.58
Hi Vico, Happy new year, I have problems with my X7510 radio, actually I don´t know how happened but the radio dissappeared and I want to reflash it, I found the link You had with the radio rom but it said that the file is no longer available, Could you give me another link with the radio room?.
Thank you in advance.
CARDOLFO said:
Hi Vico, Happy new year, I have problems with my X7510 radio, actually I don´t know how happened but the radio dissappeared and I want to reflash it, I found the link You had with the radio rom but it said that the file is no longer available, Could you give me another link with the radio room?.
Thank you in advance.
Click to expand...
Click to collapse
Here, Athena radio 1.58 for you
x7510 Radio
Thank you very much, Hakim but I had an id error when I tried to flash the radio you posted me.
Vico thank you too for the quick reply but I had an 262 error when I tried to flash the radio you posted, I had the Hspl 365, do you think that I have to change to the stock one?
Thank you Vico and Hakim
Greetings from Mexico¡¡¡
Do not change spl to stock. Make sure that your device is x7510 NOT x7500 ect.
Make sure you don't have a sd card, and make sure you are in bootloader mode (camera + reset).
Hi Vico, the model is X7510 and I took out the sd card and tried to flash the radio again, It started well but at the 7% it stopped and now appeared a model ID error [244].
Thank you for your help.
Download my one again, and put your device in bootloader mode, make sure you you only have the two files in a folder. i really don't know what else to do, try another computer maybe?, there is also a way of flash a rom by putting it storage. just try Google
hi vico i just flahs your rom WM6.5.3-23153_128DPI_x7510_6.2_VICO, but have not signal on my divice X7510 , i found this tread and relise that ur roms donst have the radio, iam trying to install this radio Athena 1.58 but have a error massage , . i also try to install the X7510 radio without succes, see the pic atach.
thanx for ur help-
Redownad this new radio (might help) if that dosn't work, i have incledud the original 6.1 htc rom. Just make sure you have Hard-spl "3.05-OliNex", make sure you are in bootloader when you flash.
NEW radio x7510 1.58
Original RUU_Athena_HTC_WWE_3.27.405.3_1.58.00.00_Ship
Also make sure you use 7-zip for extracting, just so there are no errors.
thanks for ur answer ,yes i have the bootloader when i flashing and i have Hard-spl "3.05-OliNex" y tryed to install the new radio but dosent let me , it just send me an error update, i will try to install de stock rom 6.1
i wiil let you know what happens, thanks mate.
vrgolin said:
thanks for ur answer ,yes i have the bootloader when i flashing and i have Hard-spl "3.05-OliNex" y tryed to install the new radio but dosent let me , it just send me an error update, i will try to install de stock rom 6.1
i wiil let you know what happens, thanks mate.
Click to expand...
Click to collapse
i give up, i think i have try almost evrething but no succes flashing te new radio, i dont know what the problem was, and the Original RUU_Athena_HTC_WWE_3.27.405.3_1.58.00.00_Ship also didnt let me flash it, always got just 10 % of the instalation and it stuck, after that i got the update error all the time,
thanks for ur help vico, i areciate.
try flashing rom from on board flash.
Vico100 said:
try flashing rom from on board flash.
Click to expand...
Click to collapse
what do you mean with flashing the rom from on board flash? .
what i did. i rename the RUU_signed.nbh to ATHEIMG.nbh i copy to the mini SD an then try to flash the rom in that way from the mini SD, i put the divice in boot loader and right now the screen said .... Loading.... but thats it,. i still dont see any progres.
According to the manual:
III.Select file system and format the MiniSD card to FAT32 mode.
IV.Copy image file XXX.nbh to the micro SD card and rename to ATHEIMG.NBH.
V.Turn the device power off and insert MiniSD card.
VI.Press and hold Power + Camera button, and Reset button to entry Boot loader mode.
VII.Press Power button to start upgrade procedure.
VIII.Reading source code from MiniSD card.
[Note]: This process will takes 15 mins, please don’t power off the device.
IX.After finish, press Reset button to reboot.
So probably make sure its the only file on the sd (and do it exact capital letters ect)
Vico100 said:
According to the manual:
III.Select file system and format the MiniSD card to FAT32 mode.
IV.Copy image file XXX.nbh to the micro SD card and rename to ATHEIMG.NBH.
V.Turn the device power off and insert MiniSD card.
VI.Press and hold Power + Camera button, and Reset button to entry Boot loader mode.
VII.Press Power button to start upgrade procedure.
VIII.Reading source code from MiniSD card.
[Note]: This process will takes 15 mins, please don’t power off the device.
IX.After finish, press Reset button to reboot.
So probably make sure its the only file on the sd (and do it exact capital letters ect)
Click to expand...
Click to collapse
well let me tell u tahat i have 2 divices X7510 the first one:
ROM ver. 3.29.xTep_3_00 wwe
ROM date 01/25/09
Radio ver. n/a ... the divice dosent have radio/ dosent let me install after 7%
IPL-v2. 02
ATHE400
spl-3.05.0000
on this divice dosent let me instal a radio , after 7 % it fail, and when i want to to flash the stock rom from my computer , after 10 % it fail, and i flashed from the SD following the steps u metion here , but nothing hapens after the 3 color bootscreen .
the second divice X7510 :
ROM: WM6.5.3-23153_128DPI_x7510_6.2_VICO
Radio ver. n/a ... the divice dosent have radio/ dosent let me install after 7%
IPL-v2.02
ATHE400
SPL-v3.65. OilNex
i have the same problem on both divice
Hi Vico, thank you again for your support, I downloaded the second file that you upload "X7510 1.58 radio" and I uncompressed it with 7 zip and now I could flash the radio with out problems.
Thanks again for your help and patience¡¡¡
If you need something from Mexico just say it...