I have a kaiser had boot problems so i formated it but didnt read enough first and did reset now only reconised as qcom phone any fix for this yet please
try looking here
you should have asked in the mtty thread instead of starting a new thread here.
FrankenKaiser is the only thing that might help you. Have a look around for it.
Thread closed, any problems, post in the relevant thread.
Cheers,
Dave
Related
i just got my phone today and i cant hardspl it yet. i tried that the prof. sadi and all i got was a white screen, and then i went to his other forum and dl the 3 files flashed tried to flash those and all i got was a white screen again, ALL I GET IS THE WHITE SCREEN. PLEASE HELP, p.s. im not a noob, i have had a 8525 for like a year and ahalf and never had this problem. someone please help
You've already posted in the "HardSPL will not install - WHITE SCREEN" thread (this one), so there's no point continuing this thread....
If you read through the whole of the above thread, then you should be able to work out if there has been a fix or workaround posted for your particular issue; if not, post some more relevant info so that people can help - "PLEASE HELP!!!" is just gonna get you ignored
MODS: Please close this thread
Hello to all,
I'm new on this forum and let me thank everyone !!!
I've an AT&T Tilt 8925.
First of all I tried both the ways suggested in the threads to install the hardSPL but I've always the same problem:
I've no problem to install on my device the JumpSPL1.56-KAIS.exe (or the 1.93) but when I launch the KaiserCustomRUU.exe I follow the instructions on my pc and after the program has detected my rom version (1.57) and
has started the installation of the HardSPL (at least it seems) the activesync connection disappears (it becames grey) and the RUU shows an "error" and suggests me how to restore my device leaving the battery etc. (but to restore everything it's enough a just soft reset)
Please can you help me???
Alf
Please post in the appropriate thread.
??? Which thread ???
I'm really sorry....which thread is the correct one ?
Thanks
msgrx78 said:
I'm really sorry....which thread is the correct one ?
Thanks
Click to expand...
Click to collapse
No need to apologize. The one in which you got the hardspl files.
Okay, I'm gonna answer this because it's buried in the HardSPL thread & hard to find since it was answered once about a month ago by me. Diconnect your device, do NOT reset. Run thru the recovery or close out the HardSPL flash.(You are using Flash HardSPL w/ the RUU, right?) Reconnect your device & run the utility again.
If this doesn't work it's because I'm partially guessing. You've not provided nearly enough information. I need to know what SPL version your device currently has, also if you are running a firewall & which one, also if you use any McCafee products.
I have Hard SPL and UDK Syrius beta 2.9 on my Touch Diamond. It was working fine for a couple of days then he came out with beta 3 and I was going to flash it and my diamond was not connected to Activesync so I got an error message. I then cleared storage and the device would not go past the splash screen and the radio version etc. on the splash. i have tried to hard reset several time with no luck. I have been searching around this forum for some time and I can not find any info on what to do. I have seen what to do if it won't come out of bootloader and even downloaded mtty.exe. but if activesync doesn't connect what can I do? Does anyone know where I should be looking?
Thanks in advance for any help.
Sure glad we have a dedicated question and answer section
"This Forum is dedicated to helping you get the answers you need ! Any question related to Pocket PC's, Smartphones, and the Themes and Applications that accompany them, are welcome in this thread. This section is not dedicated to a specific device or specific topic, but to any and all general questions in the Pocket PC and Smartphone world. So feel free to seek the help you need here."
thanks for all the help!!
Why don't you post your question in the DIAMOND section?
No need for the smart ass comments a *bump* would have sufficed.
Have you tried re-flashing the ROM from the bootloader?
Ta
Dave
I can't establish an Activesync connection. I don't know of any way to flash without that. I tried once, put phone into bootloader manually and started flash, got error could not connect to device.
hey guys. sorry I know I could probably find the answer to my question if I searched but I'm sorta pressed for time and I have to resort to just posting a thread. When I start up kaisercustomruu it says update utility or something like that. basically it won't start up. help!
poppinpengawen said:
hey guys. sorry I know I could probably find the answer to my question if I searched but I'm sorta pressed for time and I have to resort to just posting a thread. When I start up kaisercustomruu it says update utility or something like that. basically it won't start up. help!
Click to expand...
Click to collapse
Sorry, did .nbh file all ready at the same folder with RUU, then did Your battery capacity had minimum 50% of full capacity and last but not least does it all ready hardspl?
Been pressed for time does not alter the forum rules.
Seen as though you are new to this I suggest you read this and respond with any questions : http://forum.xda-developers.com/showthread.php?t=433835
Thread Closed
Dave
Please help anyone,
I had WM6.1 and i tried installing Alex.v52.ATT.162.Cube.ROM.
After 17% the installer broke out,
now my phone is basically screwed, its just shows the three colour screen and thats it.
How can i fix this?
When installing the cube ROM i followed these instructions on this thread
here
you can look at the stickies in the kaiser rom development forum.
try search little
Stickies
Sorry man, i am new to this,
whats stickies?
I have a similar problem except mine's stuck on the start up screen plus it won't connect to the computer. tried hard reset but nothing.
Stickies are permanent thread meant to guide every new comer. If you go read at the Kaiser ROM development sub forum, the top few thread are stickies. Stay and read a lot first before doing anything ..
Been their done that. still screwed. cant find anywhere that tells me what to do after bad ROM cooking
I have done that,
it brings up nothiing, i am looking in the stickies but nothing.
maybe i am not searching with the correct text
The thread "Sticky: Kaiser Stuck at Bootloader (aka Tri Color or Red, Green, Blue Screen)? Solutions Here" at the top of the forum would be a good place to start.
SOLUTION!!!!!!!!
Guys, everyone that is installing cooked ROMS should have this information handy at all times.
I did some research myself and stopped being lazy and actually found the thread.
http://forum.xda-developers.com/showthread.php?t=371154
Enjoy guys
Happy flashing, i know i will try again
The contents of that that thread by L26 is covered by my sticky post which Hicks kindly pointed you to.
Problem fixed. Thread closed.
Dave