Please help anyone,
I had WM6.1 and i tried installing Alex.v52.ATT.162.Cube.ROM.
After 17% the installer broke out,
now my phone is basically screwed, its just shows the three colour screen and thats it.
How can i fix this?
When installing the cube ROM i followed these instructions on this thread
here
you can look at the stickies in the kaiser rom development forum.
try search little
Stickies
Sorry man, i am new to this,
whats stickies?
I have a similar problem except mine's stuck on the start up screen plus it won't connect to the computer. tried hard reset but nothing.
Stickies are permanent thread meant to guide every new comer. If you go read at the Kaiser ROM development sub forum, the top few thread are stickies. Stay and read a lot first before doing anything ..
Been their done that. still screwed. cant find anywhere that tells me what to do after bad ROM cooking
I have done that,
it brings up nothiing, i am looking in the stickies but nothing.
maybe i am not searching with the correct text
The thread "Sticky: Kaiser Stuck at Bootloader (aka Tri Color or Red, Green, Blue Screen)? Solutions Here" at the top of the forum would be a good place to start.
SOLUTION!!!!!!!!
Guys, everyone that is installing cooked ROMS should have this information handy at all times.
I did some research myself and stopped being lazy and actually found the thread.
http://forum.xda-developers.com/showthread.php?t=371154
Enjoy guys
Happy flashing, i know i will try again
The contents of that that thread by L26 is covered by my sticky post which Hicks kindly pointed you to.
Problem fixed. Thread closed.
Dave
Related
i just got my phone today and i cant hardspl it yet. i tried that the prof. sadi and all i got was a white screen, and then i went to his other forum and dl the 3 files flashed tried to flash those and all i got was a white screen again, ALL I GET IS THE WHITE SCREEN. PLEASE HELP, p.s. im not a noob, i have had a 8525 for like a year and ahalf and never had this problem. someone please help
You've already posted in the "HardSPL will not install - WHITE SCREEN" thread (this one), so there's no point continuing this thread....
If you read through the whole of the above thread, then you should be able to work out if there has been a fix or workaround posted for your particular issue; if not, post some more relevant info so that people can help - "PLEASE HELP!!!" is just gonna get you ignored
MODS: Please close this thread
OK please don't flame me as I am going round and round in circles jumping from one thread link to another trying to get to grips with this stuff!
OK...
The other day I tried to install the hardspl and got the white screen problem.
I followed the thread to sort that out and all appeard ok and the phone continued to work OK under HTC stock 6.1
Yesterday I flashed L26_Kaiser_Diamond_V8_light release and have been playing around with it trying to sort stuff out.
I then started reading the thread about ultimate radios and trying to work out what other radios work with this ROM and how I go about installing them and read I need to confirm the spl I am on and so did the hold camera button and reset to see the spl version.
It says the following:
KAIS130 MFG
SPL-1.0.0liPof
CPLD-8
Now from what I understand it should say SPL-3.2X or similar?
But it does not?
I thought that I needed the SPL-3.2X etc in order to flash cooked ROMS but it looks like I dont have that......so how was I able to flask L26_Kaiser_Diamond_V8_light release ?
Thanks
pachjo said:
OK please don't flame me as I am going round and round in circles jumping from one thread link to another trying to get to grips with this stuff!
OK...
The other day I tried to install the hardspl and got the white screen problem.
I followed the thread to sort that out and all appeard ok and the phone continued to work OK under HTC stock 6.1
Yesterday I flashed L26_Kaiser_Diamond_V8_light release and have been playing around with it trying to sort stuff out.
I then started reading the thread about ultimate radios and trying to work out what other radios work with this ROM and how I go about installing them and read I need to confirm the spl I am on and so did the hold camera button and reset to see the spl version.
It says the following:
KAIS130 MFG
SPL-1.0.0liPof
CPLD-8
Now from what I understand it should say SPL-3.2X or similar?
But it does not?
I thought that I needed the SPL-3.2X etc in order to flash cooked ROMS but it looks like I dont have that......so how was I able to flask L26_Kaiser_Diamond_V8_light release ?
Thanks
Click to expand...
Click to collapse
Read the SQL Questions thread in the Wiki. It will explain a lot of this to you.
In short, any HardSPL will allow you to flash, it's just the 3.* ones are more compatable with the latest WM6.1 builds.
EDIT:
Normally I'd flame you for this, but Im already flaming another noob atm That doesn't mean someone else wont flame you later.
Ta
Dave
pachjo said:
OK please don't flame me as I am going round and round in circles jumping from one thread link to another trying to get to grips with this stuff!
OK...
The other day I tried to install the hardspl and got the white screen problem.
I followed the thread to sort that out and all appeard ok and the phone continued to work OK under HTC stock 6.1
Yesterday I flashed L26_Kaiser_Diamond_V8_light release and have been playing around with it trying to sort stuff out.
I then started reading the thread about ultimate radios and trying to work out what other radios work with this ROM and how I go about installing them and read I need to confirm the spl I am on and so did the hold camera button and reset to see the spl version.
It says the following:
KAIS130 MFG
SPL-1.0.0liPof
CPLD-8
Now from what I understand it should say SPL-3.2X or similar?
But it does not?
I thought that I needed the SPL-3.2X etc in order to flash cooked ROMS but it looks like I dont have that......so how was I able to flask L26_Kaiser_Diamond_V8_light release ?
Thanks
Click to expand...
Click to collapse
If you are able to flash a ROM onto your device, then you must have an UNLOCKED phone. For simple instructions on upgrading to the new SPL I suggest you visit the following :
http://forum.xda-developers.com/showthread.php?t=398565&highlight=step
Good luck.
Well I am sure I am gonna get flamed for this post, but here goes....
BTW "I AM NOT MOANING OR PICKING FOR AN ARGUMENT" I know this info here is given as is and appreciate the time people spend putting it all together
For the noob there is a trillion things to read here all of which lead to another trillion things which lead to ......
This phone flashing is all new to me and as I paid £434 for it I dont want to brick it, a term along with many I have never heard of before coming here.
I digress...
Anyway after reading and trying to understand it all I have flashed my phone and it works a treat and I am happy, just still in the dark about many things.
The thing is as a noob it is extremely daunting to start to read a thread, wiki etc to try to understand about a topic which diverts you to threads which divert, divert, divert so that after 3-4 diversions you foget what it was you were readiing about to start with!
And then you get to the point....I dont understand this...should I post lest I get flamed.......
So basically from a noobs point of view....everyone was a noob at some point, be gentle with us!
OK.....let the pachjo bash commence...........
Not a flame, just my way of working...
You raise some good points about the amount of info here. But like most here I managed to flash my device without posting a single new thread. If I had a problem with a step I posted there.
_Alex_ has consolodated most info into the single sticky. And there are step by step guides and FAQs on the Wiki.
I just took it one topic at a time:
*Found a ROM, said I needed HardSPL.
*Found HardSPL, installed it.
*Flashed ROM.
*No sound, found thread explaining about Radios. Flashed Radio.
*and so on.
I was (and still do) always reading thread that I found related to me learning as I go and helping where I can. I too like you knew nothing when I first joined and no one minds "noobs" asking questions in the relevant threads when they get stuck, but this is ROM development forum. All new threads should pertain to ROM "development".
Ta
Dave
you must use (aka JumpSPL )file before changing the SPL
this jumber must be in your device before flashing the new hard SPL
see hare and read carefuly :
http://forum.xda-developers.com/showthread.php?t=396922
got it from here also
http://forum.xda-developers.com/showthread.php?t=354061
cheers
Thanks guys.....am reading away and will take onboard your comments
first off, you can flash any rom with the olipof hardspl 1.0. the problem is, you will get screen freezes every once in a while. Using jumpspl, you can go to another hardspl. Usually jumpspl is included in all the new hardspls, but maybe not. Get familiar with what jumpspl is and then switch to hardspl.
thomassster said:
first off, you can flash any rom with the olipof hardspl 1.0. the problem is, you will get screen freezes every once in a while. Using jumpspl, you can go to another hardspl. Usually jumpspl is included in all the new hardspls, but maybe not. Get familiar with what jumpspl is and then switch to hardspl.
Click to expand...
Click to collapse
Yep... I shall do that!
I have gone flash crazy as I am now gonna whack on L26_KaiserDiamond_V9
I am amazed at how fast my apps are loading now I am no longer on the stock ROM!
The phone reception is better, the SRS WOW is fandabbydosey its all good for me, and I have fixed (well found the solution to at least one of my gliches also)
I downloaded the unlocker, did exactly as what it said, and after I flashed w/ the patched radio I cannot enter the system!
The screen is dark after the AT&T 3g animation, and no response.
But I can use the original AT&T rom to flash it back.
Anyone know a solution?
Ibftl
Read this first and post your questions there, so that the flame jockey's will not fry you...
http://forum.xda-developers.com/showthread.php?t=433835
I did exactly as what it told and I have tried several times.
Go to that thread and ask there....okay ? you will get a better response there.
I have Hard SPL and UDK Syrius beta 2.9 on my Touch Diamond. It was working fine for a couple of days then he came out with beta 3 and I was going to flash it and my diamond was not connected to Activesync so I got an error message. I then cleared storage and the device would not go past the splash screen and the radio version etc. on the splash. i have tried to hard reset several time with no luck. I have been searching around this forum for some time and I can not find any info on what to do. I have seen what to do if it won't come out of bootloader and even downloaded mtty.exe. but if activesync doesn't connect what can I do? Does anyone know where I should be looking?
Thanks in advance for any help.
Sure glad we have a dedicated question and answer section
"This Forum is dedicated to helping you get the answers you need ! Any question related to Pocket PC's, Smartphones, and the Themes and Applications that accompany them, are welcome in this thread. This section is not dedicated to a specific device or specific topic, but to any and all general questions in the Pocket PC and Smartphone world. So feel free to seek the help you need here."
thanks for all the help!!
Why don't you post your question in the DIAMOND section?
No need for the smart ass comments a *bump* would have sufficed.
Have you tried re-flashing the ROM from the bootloader?
Ta
Dave
I can't establish an Activesync connection. I don't know of any way to flash without that. I tried once, put phone into bootloader manually and started flash, got error could not connect to device.
Hi, I am new here.this forum is very usefull in windows mobile..
I have tried one of the software posted here.. Kaiserunlocker... which is processed in 123 steps accordingly...
I had done step 1 the phone is ok
in step 2 the phone goes dark with verious colours grany screen
I dont understand how to revive from this problem.. please give some Idea..
I would be appricated.
tanks.
My HTC phone Model is -KAIS100 (AT&T)
aliarjun said:
Hi, I am new here.this forum is very usefull in windows mobile..
I have tried one of the software posted here.. Kaiserunlocker... which is processed in 123 steps accordingly...
I had done step 1 the phone is ok
in step 2 the phone goes dark with verious colours grany screen
I dont understand how to revive from this problem.. please give some Idea..
I would be appricated.
tanks.
My HTC phone Model is -KAIS100 (AT&T)
Click to expand...
Click to collapse
Can you soft reset? Can you hard reset? You need to read a lot more that what you have read. This site ( Kaiser ) has the best help thread on XDA... Olipof has one in all unlocker that you should have used.
I just tried that tool a few days ago,had the same problem while flashing the kaiser of a friend...
to get it to work I did the following:
I manually installed the 3.29Hard2 SPL from cmonex using jump spl,
then used the tool you use for the sim unlock.
I think that the problem is that that tool doesn't connect via usb when it reaches the bootloader.
thanks for the kind concerns,
But one thing I dont understand, the set is in grany screen... (startup is ok but it goes to grany screen {blank} while main windows appears)
Please tell me how to put jump spl. manually?
also hard reset is not processing. how to do it?
aliarjun said:
thanks for the kind concerns,
But one thing I dont understand, the set is in grany screen... (startup is ok but it goes to grany screen {blank} while main windows appears)
Please tell me how to put jump spl. manually?
also hard reset is not processing. how to do it?
Click to expand...
Click to collapse
rtfw
You need to read son, read like you have never read before. Then when you think you understand it your almost there. I have been reading for years and have yet to make my first rom guess it really comes down to time. Well the answers are there and yes you sometimes have to dig. But there is this handy search button at the top of the page third from the right if my memory is clear. And it now uses the google search engine to search this forum a function not here years ago. So your tools are there use them wisely young grass hopper and try not to post until you have read for some days. And please dont open another thread if you have a question such as how do i jump spl you should find the appropriate thread to post in.
thanks
nate
Duplicate thread.
Thread Closed
EDIT: Answer in this thread :http://forum.xda-developers.com/showthread.php?t=433835
Ta
Dave