Database Info

O2 Stealth Hard Reset not working

I've got an O2 Stealth that I'm trying to clear the contacts and calender memory. I did a Google and it said to do a Hard Reset. So I followed the instructions, hold the Windows and OK key and hit the reset with the stylus. It seemed to work, but after about 2 blue bars into the reset (it says Format Dsk2 on the screen, black background) it says "Fail -Reboot", the phone automatically restarts and then hangs on the Welcom O2 screen (I waited 5 hours the first time).
I pulled out the battery, put back in and then the phone turns on and works like normal - but no data has been cleared.
Any ideas?

hard reset
Hard Reset O2Stealth
Turn Off
Press Window , OK & Power
Hard Reset DOPOD M700
Turn Off
Press SOftkey Left & Right, & Power

Help! MY MDA does not boot

Hi,
I have upgraded my MDA to NO EVIL ROM Windows mobile 6 version from this forum. Device was working great for couple of weeks. Now suddenly it stopped booting. When I do soft reset the
S.N.E ... Presents screen comes up.
Then HTC Wizard screen comes up
The Touch No Evil screen come up and then it stays at the same screen. It does not respond even to power button now.
The radio light (green light) blinks. The system does not respond to even hard reset.
I am tosed. Please help. Any response to recover from this situation is usefull.
Thanks in advance...

From the sounds of it, something you have installed or configured isn't allowing the phone to finish booting. You basically have 2 choices at this point... Hard Reset or Reflash the phone.
When you say hard reset doesn't work, are you sure you are doing a hard reset? Pull the battery out and let the phone rest for a minute or so. Press the power button a couple of times (yes with the battery out) to discharge any power in the device. Then put the battery back in, and press the top two buttons on either side of the phone (Comm and Record), and while holding those in press and release the power button. After a couple of seconds you should have a black screen with white text asking you about resetting the phone. Press the Send key (the green phone key that you use to answer the phone) and you will have completed the Hard Reset. If you get errors then you need to tell us what they are. If you never get the black screen with white writing then you aren't holding the buttons down correctly.
To reflash the phone, put it in bootloader (press and hold the recorder button while pushing in and releasing the reset button (or while turing the phone on)). Once you get the tri color screen, hook up the USB cord and it should say USB in the lower left. Now you can flash it (even though the phone won't connect to ActiveSync).
Good luck and hope that helps.

Able to reboot
Thanks for the advise. After several tries, was able to hard reset and started booting and working OK.
I have not done any soft reset after this event. What should I look for to correct, if any errors.?. do you recommend that I reflash the ROM?. The only software, I had installed was Microsoft Voice recorder. I have not installed the same after the reboot.
Thanks

ANother issue
Now after resetting, I see my phone getting into vibration mode all the time. Even if I set to ring mode, it will automatically go back to vibration mode after some time. Any idea on how to fix the same?.
Thanks

Touch Pro keep restarting after TAEL ROM screen

Hi, I have been flashed TAEL ROM, radio last month. Everything running fine until early of this morning.
I have not do any changes recently.
suddenly this morning I could not turn on the phone from standby. So I soft reset it, right after soft reset, it keep on reboot itself after reach TAEL ROM screen, sometimes after Windows Mobile screen.
I tried to get into bootloader screen but the nothing happened.
the reset button seems like cannot function now.
I press and hold vol down button then press on Reset but phone have no respond at all...
Anyone have experienced this and solved it?
Thank you!!

Try pulling out the battery for a while. That fixes this problem sometimes.

I would try a hard reset, if things do not improve.
Had to do one yesterday and it took me some time to find out how it's done for this phone so if you're not familiar with it here it comes:
1) Turn off the phone (take out battery for 5 sec, then put it back in)
2) Hold volume DOWN button and press the centre of the circle (enter button)
3) While holding those 2 buttons, power up the phone (and keep pressing this combination until you enter into bootloeader)
4) When in bootloader (I normally keep the volume DOWN and Enter button pressed, until I see the message in bootloader saying that in order to hard reset I should press volume UP, or any other key to cancel).
Hope this helps, and remember that you'll loose everything (programs, contacts, SMS, etc) if you do this.
Good luck.

Remove your sim and sd card before doing the hard reset..right?

It's not necessarily REQUIRED, but it is recommended.

how to hard reset lg gw620?

how to hard reset lg gw620?

Hold down the VOLUME DOWN button, MENU button (the one on the keyboard), and CAMERA button for about 5-10 seconds, and a message will come up asking if you want to factory reset the phone.
Important : all data will be lost

any combination will work..you must reset it from settings-memory-factory data reset

G Pro 2 ... Wrong Flashing. Pls Help.

I have a Lg G Pro 2. Few days back it got bricked by its own( a crazy fact). That time it was showing QHSUSB_BULK. I figured it out as 9006. Took the phone to a local service shop. Today I got it back and found that nothing had happened to the phone, except worse. Now it is not detected by PC, only green light blinks for some time if tried to power on. And then everything is black and cold as death.
I think it have been flashed with wrong ROM. Anybody here can guide me with the test points of Lg G Pro 2 (D838 F350) ? So that I can force it to QHSUSB_BULK ? Or any step by step advice to get it up ?
I am in real need of assistance, and thanks in advance for any sort of help. Best Regards.

I would like to mention that the phone indicator blinks for sometime if I try to power it on, as it does on boot, but nothing else is there. No recognition by PC, no presence in Device Manager. Blinks for sometime, stops, again starts blinking... and this goes on at regular short intervals. The area around the camera gets warm after sometime. Everything loops till I pull off battery.
Now, am I missing something ? Is the problem not as deadly as I am thinking ? Is it soft bricked ?

Hi, I not sure how it got bricked I never brick LG device.
Normally if anything happen we try pull battery out and put it back in, try then to turn the phone on.
Have you try connect to to pc with USB cable, one end of USB connnect to pc and other end connect to the phone. Then try press Power + Volume Up or Power + Volume down, this is to try to get into phone download mode. If you can get into download mode you can flash the kdz file to make it useable again.
Or without the USB cable we want to get to factory reset mode by use hardware method try press:
- Power + Volume Up or Power + Volume down
- If you see LG logo come up release the buttons you press above 1-2 second
- Press again Power + Volume Up or Power + Volume down
- Until it show and ask to use volume up/down button to select choice, say yes
Caution factory reset will delete all data on the phone and reset it as when you bought it new.
- Again it will ask for factory reset, use Volume up/down to choose and select yes for factory reset

turn on the phone and when light is blink press volume up or down button for some time and see if it it is detected as usbhulq?