hi everybody !
i have blackstone mobile , i need to edit registry for some application ..
could anyone tell me how to do that clearly plz ..
i'm using ' REGEDIT ' application ..
get total commander it got a nice regeditor
Yeah, TC will be easier to use. Go to \\Plugins\Registry, and then navigate to the registry entry like you would with file explorer. When you get to the key you want, click on it and a little applet will pop up where you can change the value. Change it, click 'ok' and then in most cases you need to soft reset to get the change to take place. That's all there is to it. HKLM stands for 'hard key local machine', HKCU is '... Current User,' and HKCR is '... classes root.'
Since you don't know what you're doing, be sure to do a full back up beforehand in case you do something dumb.
Have a look at this guide for noobies to registry http://forum.xda-developers.com/showpost.php?p=4257844&postcount=30
guys thx so much all of u .. i did it
Related
Iv'e started this thread after several PMs regarding this topic
Please feel free to post your tips on how to customize/personalize your roms before flashing.
Heres one to start from my inbox before i deleted it
garymeg said:
I have done a similar thing, by putting the "owner" info into the rom and changing the registry to remove the "owner info" control pannel applet then when they hard reset they get my welcome note same as you and also they can't disable/change owner details
Click to expand...
Click to collapse
Do you think that you could explain to a n00b like me how you can edit the rom or whatever so that the owner details cannot be changed?
Thanks
Get a registry editor like resco regedit or something like, goto
HKLM\controlpanel\Owner
and add a new string value called
"Redirect" and leave the value blank
now delete the dword "group"
save and reset device
If you are cooking you have to search the registry for the dword "group=0" and change to String "redirect="
Now that I've been around for a little while I will try this now, but If I ever wanted to change the details (say i was to sell it or whatever, which I REALLY don't want to do) what do you do?
The best way is to reflash a standard Rom without your personal details in. if you only want to modify it reverse the registry settings with a reg editor note this must be done after a hard reset every time. best to reflash your custom rom again modifying the settings first.
Hi there
The new way to write sms is absolutely awful!
Is there any possibility to get the "old" way back? I don't like this kind of "messenger"-style!
EnzephaloN
You can disable threaded sms via Schaps' excellent 'Advanced Configuration Tool'.
http://forum.xda-developers.com/showthread.php?t=418151
Ah, thanx a lot!
Just done it buddy, REALLLLLY easy to do.
Easiest way..
PHM Registry Editor
Scroll down and download " Pocket PC 2002,2003 (ARM/PXA )
Copy the downloaded file ( .cab ) across to your device.
Once there install it then open it up and navigate too HKEY_CURRENT_USER\Software\Microsoft\Inbox\Settings\OEM\
Create a new DWORD value with value name as SMSInboxThreadingDisabled and set it value data to 1.
Soft reset and its done
I did it 5 mins ago and it makes texting alot better !, seems to run smoother too. Only takes a minute to do too.
When i goto the Wiki to adjust some things in my ATT Fuze Registry and on/in the Wiki instead of the HKEY prefix its HKLM. Is there something that tweaks the registry with the ATT fuze? My Fuze doesnt have the HKLM prefix keys. And is there a program that i can use on my PC that can edit the registry on my phone with out having to use the tiny stylus??
Symbian_Black said:
When i goto the Wiki to adjust some things in my ATT Fuze Registry and on/in the Wiki instead of the HKEY prefix its HKLM. Is there something that tweaks the registry with the ATT fuze? My Fuze doesnt have the HKLM prefix keys. And is there a program that i can use on my PC that can edit the registry on my phone with out having to use the tiny stylus??
Click to expand...
Click to collapse
HKLM= H Key Local machine
It is just an abbreviation that is used by some registry programs and such.
There are programs that can apply some of the commonly used tweaks. You can search the forum for advanced config.
Symbian_Black said:
And is there a program that i can use on my PC that can edit the registry on my phone with out having to use the tiny stylus??
Click to expand...
Click to collapse
http://mobile-registry-editor.en.softonic.com/pocketpc
I used that whenever I made registry entries. It's a pretty good program thats extremely lightweight and gives you access to everything in the registry so you can edit it from your pc. Just connect with activesync. Just make sure you either make a backup or you know exactly what you're changing before you change it
also as a side note, some registry changes don't stick after a soft reset. If thats the case (happens when editing the registry for something thats open) power off your device by holding down the power button and reboot.
Access Fuze Registry
I am being denied access to my Fuze Registry using Mobile Registry Editor. When I try to delete a registry, it says that access is denied. I did not have this problem with my Tilt. Am I missing something?
Access denied issue
Your fuze and tilte both usually lock the registry in an attempt to prevent harmful changes when deleting or modifying certain values. But the solution is to use an internal registry editor or some other registry editor. such as the one that comes with pocket controller, if you have the cash haha, internal editing can be done with resco explorer's registry add in, again if you have the cash, but these tools are invaluable when editing your device to your preferences.
Hello all,
Been doing as much reading as possible trying to figure out what I am sure is an obvious in my face answer. I am trying to use Resco Explorer to make a couple changes but i can not locate HKLM in order to;
Go to HKLM/Software/Samsung/JINBOX and set "ThreadedViewDisabled" from 0 to 1.
I have Resco 2010 with the addins. I understand this to be "the" program to use. But I can't find a "dummies" how to use it...
Any help would be appreciated.
Resco Explorer
Hi Iam trying to find KKLM software in resco explorer.
Does anyone know how I find this ?
There's no such thing like KKLM in Windoze, unless you create a folder named like this.
Maybe you mean HKLM and you can find it in the registry...but you need to have a registry editor installed (in Resco's case, the registry add-on).
If you have installed the registry add-on, follow these steps:
Tap the 'up' button multiple times until you reach the end.
There, you can see something like 'registry'.
Tap it, tap HKEY Local Machine, tap Software, etc.
thank you
Hi guys,
sorry for noobiness but i have tried my best searching the forum with no luck.
Basically i'm trying to make an edit to my registry using total commander but cant understand how to change the value.
All i've found in the forum is assistance on how to get to the desired key/sub key etc. I can get to the file fine, just not sure how/what alteration needs doing. Heres the edit i'm attempting:
HKLM/Software/HTC/Manila
HomeLSKPath = !"\Windows\manila.exe" --switchtopage Manila://people\browserlayer\?.page
HomeLSKText = Contacts
Do i edit 'HomeLSKPath'? and if so to what? Actually it says "Function not supported" when i try that.
Thanks so much for any help you can give me!
you are trying to change value, but you dont what you are suposed to change it to?
Or did I misunderstand?
I think I uderstand that you dont know HOW to change it.. but do you know WHAT you are changing it to?
ok.. I didn;t know Total Commander had a reg editor.
I just played with it, and I highly recommend you get PHM reg editor. Google it. It's free.
If you insist on Total Commander, you should be able to tap and hold the item you want to modify and choose properties.
The current value will be shown.
Change it to what you want it to be.
Please be careful.. if you mess up a value you may need to Hard reset your phone.
You are trying to modify your left softkey in Manilla.. What you posted looks like it's either currently mapped to contacts, or you want to change it to be contacts...
brunswick said:
Do i edit 'HomeLSKPath'? and if so to what? Actually it says "Function not supported" when i try that.
Click to expand...
Click to collapse
I guess you're trying to edit it with the Notepad button. All you have to do is just double-tap the HomeLSKPath to edit its value
Hey thanks alot for the help guys!
And thanks x51, i downloaded PHM reg editor and its much better than total commander.
Ok so i think i'm pretty sure how to edit the file now, the question is to what?
the edit i'm trying is:
HKLM/Software/HTC/Manila
HomeLSKPath = !"\Windows\manila.exe" --switchtopage Manila://people\browserlayer\?.page
so should i set the HomeLSKPath value (i think its empty at the moment) to this whole line? !"\Windows\manila.exe" --switchtopage Manila://people\browserlayer\?.page
thanks again