Database Info

Bricked Please Help!

I tried to switched my RC33 to ADP and now I am effectively bricked ><.
I tried downloading the DREAIMG.nbh and restarting via Camera+Power but it starts to load, says "No Image File Found" then quickly goes back to a screen listing the following.
DREA100 PVT 32B
HSPL10.95.3000
CPLD-4
RADIO-1.22.12.29
Oct 20 2008
Serial0
The word serial0 is contained in a yellow line and there is three green Android's skateboarding at the bottom. Any ideas on how to fix this? Please Help.

AGx-07_162 said:
I tried to switched my RC33 to ADP and now I am effectively bricked ><.
I tried downloading the DREAIMG.nbh and restarting via Camera+Power but it starts to load, says "No Image File Found" then quickly goes back to a screen listing the following.
DREA100 PVT 32B
HSPL10.95.3000
CPLD-4
RADIO-1.22.12.29
Oct 20 2008
Serial0
The word serial0 is contained in a yellow line and there is three green Android's skateboarding at the bottom. Any ideas on how to fix this? Please Help.
Click to expand...
Click to collapse
Press Call + Menu + Power to restart. There's nothing wrong with your phone so don't worry. Double check that DREAIMG.nbh is not in any folders on your SD card, then try it again. The "serial0" is normal, we all see it when we enter the bootloader by holding down camera + power.

try to reboot into recovery(press call+menu+end and immediately press and hold home) then from there you can enter the terminal and make sure that DREAIMG.nbh is listed when you typre "ls /sdcard" if not then you can PM me and i can walk you through what to do

Rooted once more!
I figured it out. For some reason it wasn't reading the DREAIMG file, it was corrupted or the SD Card was lose or something. I used a different SD Card and dropped the DREAIMG file there and started the process over and it worked. Thanks for the help guys ^ ^ I appreciate it much.
|Spike|

HTC Magic Bricked?

hi guys
i'm crying
So i've used the amon ra to create goldcard, root, and flash my mytouch.
The procedure finish correctly.
but after when i want to install a new rom (ex :: eclair) in french, i upload the rom, and at reboot the phone stay on vodafone screen.
After some research, i'have put a 32A radio on a 32B phone (i'm not sure)
So i'd try to replace the radio.
I went on the HTC site and download the "ota-radio-2_22_19_261.zip" file
I copy that on my SDCARd, and rename it upload.zi
I went on the AmonRA recovery, and after a wipe, say "apply update.zip"
The phone write that he found,it, and i start the updating.
The phone "reboot", and display a picture which represent a uploading on the phone.
The phone reboot, and .... nothing
i rest on the viodafone display :/
And i've not access to fastboot.
I apolozige that my phone is bricked?:! isn't it?
So i want solutions to send it to the sav, or if there are other things to unbrick that....
thanks for answers, i really need help...
(I thought that the radio flash cant brick the phone, but apparently it's not exact?!)

can u access recovery or hboot ?
what's ur spl n radio ?

i'd access to.... nothing i think
vol- + power = Vodafone screen
Back + power = vodafone screen
home + power = codafone screen...
i think its really breicked
is there another solution than send it to SAV (i'm not sur that the SAV take it on )
Thanks for answers

Try this:
Unzip the ota-radio-2_22_19_261.zip, inside that you should find a radio.img. Unzip that to C:\AndroidSDK\tools\. Boot your phone into hboot (volume down + power). Connect you phone to you computer via USB, open up CMD and type in (pressing enter after each line):
Code:
cd C:\AndroidSDK\tools\
fastboot flash radio radio.img
If that doesn't work, boot your phone to recovery (looks like that worked). Again, connect the USB and type the following in CMD:
Code:
cd C:\AndroidSDK\tools\
adb shell flash_image radio radio.img
Edit: Looks like that didn't work..
When you phone is stuck on the boot logo. Try connect your phone using USB. Open up CMD and type:
Code:
fastboot devices
or
Code:
adb devices
If you get up a serial on any of these, then you should be able to flash a 32B radio and unbrick your device.

Not sure if this will help but This worked for me. Remove the recovery image. Then power off the phone. Power back up holding the Power and Home buttons at the same time. You then should see the "triangle" screen. If you see this, push, One Time, the Power and Home buttons at the same time. This should bring up the factory recover screen. Here you should be able to reset to factory software. You will need to re-root afterwards, but like I had mentioned... this worked for me and not sure if it works for all.

ok so i think it really dead
My computer dont detect my magic when i connect it (no material in the .
I try to send it in the device driver list
And i can't acces to the fastboot / recovery mode ....
thanks a lot for your answers i think i had to rebuy one

Just return it to vodafone.
Did the same thing as you did a couple of moths ago...
6 days later I had a new phone (Returned it to my store in germany )
At least its worth a try and saves a lot of money...

[Q] MT4G boot's into FastBoot, no keys work. Tried using zip file in HBOOT.

Good evening everyone,
I have been searching numerous threads for months on this problem, so I am hoping someone can finally help me, as I do not see any resolution yet to my problem. I have a MyTouch 4G that is booting into 'FastBoot' everytime you turn it on. I pretty sure the problem is when I went to unroot my wife's phone to send it in for warranty report, I forgot to undo the ./gfree method I used to root her phone.
The phone is acting kind of strange, so I am going to describe the problems and weirdness I am seeing:
* I can press [Volume Down]+[Power] to get into hboot. No keys work though for selection.
- If I have a sdcard with my pdimg file on it, it does get detected and I can use the volume rocker keys to select yes or not.
* I can not hold any keys and power it on, but boots into FastBoot. No keys work though.
* I can plug a USB cable into the phone, Windows sees the phone as Android 1.0 device. The screen on the phone will change depending on what mode I am in: [FastBoot USB] or [HBOOT USB PLUG]. No keys work still.
* ADB does not see the phone when USB is plugged in.
* I placed the pdimg.zip file on the sdcard, selected yes to update, took about 5 to 10 minutes, and pressed power to reboot, nothing changed. It only said skipped on one item, rest was OK.
* I pressed [Volume Up]+[Power], phone vibrates three times, status light blinks off and on with a blank screen.
Info about my current setup that I see on the eng screen:
Glacier PVT Ship S-OFF
HBOOT-0.86.0000
MICROP-0429
RADIO-26.03.02.26_M
eMMC-boot
Sept 27, 2010, 11:12:59
[FASTBOOT USB] <--- Highlighted in red
<vol up> to previous item (I tried, does not work.)
<vol down> to next item (I tried, does not work.)
<power> to select item (I tried, does not work.)
[Highlighted in blue]BOOTLOADER
REBOOT
REBOOT BOOTLOADER
POWER DOWN
-------------------------------------------
I am trying to include as much information as possible to help you help me!
Thank you in advanced!

Have exactly the same problem with my HTC Wildfire ...
Was even able to flash a shipped rom through my PC, but still the phone gets stuck on fastboot with no working keys or hboot (Vol Down + Power) with no working keys either ...
Haven't found any threads to follow in order to get the phone back working again

[Q] Phone don`t boot

Hello ,
I have htc desire s. So some 2-3 months ago, after i make the updates that he asked me) dosen`t start to boot(it stay stuck on htc white screen). I try to go with him on waranty but he have some scrach and they tell me is not anymore on waranty(they don`t even open it). It`s buy it on voda romania. For this reason i will never buy a htc. I was a big fun of htc but because of this. The phone stop working after update him with.
The only place where i can get in is bootloader:
SAGA PVT SHIP S-ON RL
HBOOT-0.98.0002
RADIO-3805.06.02.03_M
eMMC-boot
Mar 30 2011,17:29:31
I have this options:
fastboot
recovery
factory reset
simlock
image crc
So i will tell you also what i try(but remeber the only place i can go on this phone is jut the bootloade)
I try to s-off with revolutionary but it say "waiting for device..." and this is all. I also install the drivers HTCDriver3.0.0.007 - from revolutionary site.
I try to install this room:
- RUU_Saga_HTC_Europe_1.47.401.4_Radio_20.28I.30.085AU_3805.06.02.03_M_release_199410_signed
- RUU_Bravo_Froyo_Vodafone_UK_2.33.161.2_Radio_32.49.00.32U_5.11.05.27_release_157522_signed
On both i was in fastboot to try to install. All was good until the rom say
checking...then "Waiting for bootloader.........."....and here some time the phone get stuck in that menu some time he get rebote and remain on htc white screen...i also try to keep vol down press it to in bootloader...but even if i get to bootloader again the process install from my pc stay there and waiting for phone to get rebooted in bootloader....
From the bootloader i say i have this options:
fastboot
recovery
factory reset
simlock
image crc
If i press fastboot i get this menu:
botloader
reboot
reboot bootloader
power down
If i press Botload it`s get back to the first menu.
If i press reboot the phone get reboot.
If i press reboot bootloader the phone get stuck in that menu. To can use it again i have to remove the batery.
If i press power down the phone turn off
From the forst menu if i select recovery i get the htc white screen and after a while (10-15 sec) he get turn of, then is vibrating 7 times....and remain closed(stuck i belive). I have to remove battery to can turn on again.
If i select factory reset he get stuck in that menu(i have to remove battery)
if i select sim lock i get:
sd ini fail!!!
process done,reboot device?
<vol uo> yes
If i press vol up he get rebooted
If i select image crc i get:
calculating... please wait
osbl:0xf82de974
amss:0x6786e670
hboot:0x501bbd09
recovery:0x7957410b
and after 30-45 sec i get
system:0x36e39c7
press power key to go back,and if i press he go back
I hope is not the same problem with the internal memory or at leaast to verivy this...if some one can provide me steps to do this....
Thanks in advance,
P.S. sorry for my poor english...

You need to get adb working and then use revolutionary to s off and root and install clockworkmod and then use that to install a custom rom.
Instructions for all these steps are in the forums, just search ...
Sent from my HTC Desire S using xda premium

Yes, but how?
sadsac said:
You need to get adb working and then use revolutionary to s off and root and install clockworkmod and then use that to install a custom rom.
Instructions for all these steps are in the forums, just search ...
Click to expand...
Click to collapse
Hi sadsac,
interesting advice. I'm in a similar situation (link), and would really appreciate a hint on the details of your solution.
How exactly do I get adb working with respect to our S-On and locked situation?
Thanks for any help
Rgds
Patrick

Adb works when stock and s on. You need working adb for revolutionary to work. U know it's working when u type adb devices in the command prompt window and it lists your device serial number.
Use the adb set up guide threads to set up adb. Search xda or Google.
Sent from my HTC Desire S using xda premium

[Completed] [Q] Evo 4G lte bootloader has no GIFT FILE etc

OK I left my phone and when I went back and got it the touch screen wasn't working. I think the idiot there tried to put the operating system on his desktop because he was asking me if I had a disc with one on it. .......
When I restart while pushing vol down, the screen shows:
***UNLOCKED***
JEWEL PUT SHIP S-ON RL
HBOOT-2.09.0000
RADIO-1. 13. 11. 0830
OpenDSP-v31. 1. 0. 45. 0015
eMMC-boot
Oct 18 2012 15: 46: 20
when I try to fastboot
the screen flashs this :
SD CHECKING
NO GIFT FILE.......
LOADING ....[PJ75DIAG.ZIP]
NO IMAGE!
LOADING...[PJ75DIAG.nbh]
NO IMAGE OR WRONG IMAGE!
LOADING...[PJ75IMG.zip]
NO IMAGE!
LOADING...[PJ75IMG.nhb]
NO IMAGE OR WRONG IMAGE!
Then goes back to the HBOOT screen with the options
FASTBOOT
RECOVERY
FACTORY RESET
CLEAR STORAGE
SIMLOCK
IMAGE CRC
SHOW BARCODE
I have cleared storage, recovery, factory reset, reload bootloader, reboot, when the phone boots up I have the lock screen but the touch screen doesnt work, just the power, vol +, vol-
I tried using a RUU my pc recognizes the evo , checks the version which is 3. 17. 651. 4 asks if I want to update to 4. 13. 651. 4 goes to screen that says rebooting to bootloader right after that the usb connection is lost and the screen says waiting on bootloader..... the phone screen is black with silver HTC logo in middle, the computer pops up with message that the last USB device you connected to this computer has malfunctioned and windows does not recognize. The RUU shows error 171 no USB connection and exit button. The USB connection is gone, the black screen HTC logo stays until I restart the phone then I have lock screen no touch screen workings and usb connection working and message at top of screen usb file sharing . I did download minimal fastboot adb and when I tried to use it, I could get the phone to show fastboot usb, but it didnt have the usb connection active. Obviously I am noob please advise.

Aquarius0128 said:
OK I left my phone and when I went back and got it the touch screen wasn't working. I think the idiot there tried to put the operating system on his desktop because he was asking me if I had a disc with one on it. .......
When I restart while pushing vol down, the screen shows:
***UNLOCKED***
JEWEL PUT SHIP S-ON RL
HBOOT-2.09.0000
RADIO-1. 13. 11. 0830
OpenDSP-v31. 1. 0. 45. 0015
eMMC-boot
Oct 18 2012 15: 46: 20
when I try to fastboot
the screen flashs this :
SD CHECKING
NO GIFT FILE.......
LOADING ....[PJ75DIAG.ZIP]
NO IMAGE!
LOADING...[PJ75DIAG.nbh]
NO IMAGE OR WRONG IMAGE!
LOADING...[PJ75IMG.zip]
NO IMAGE!
LOADING...[PJ75IMG.nhb]
NO IMAGE OR WRONG IMAGE!
Then goes back to the HBOOT screen with the options
FASTBOOT
RECOVERY
FACTORY RESET
CLEAR STORAGE
SIMLOCK
IMAGE CRC
SHOW BARCODE
I have cleared storage, recovery, factory reset, reload bootloader, reboot, when the phone boots up I have the lock screen but the touch screen doesnt work, just the power, vol +, vol-
I tried using a RUU my pc recognizes the evo , checks the version which is 3. 17. 651. 4 asks if I want to update to 4. 13. 651. 4 goes to screen that says rebooting to bootloader right after that the usb connection is lost and the screen says waiting on bootloader..... the phone screen is black with silver HTC logo in middle, the computer pops up with message that the last USB device you connected to this computer has malfunctioned and windows does not recognize. The RUU shows error 171 no USB connection and exit button. The USB connection is gone, the black screen HTC logo stays until I restart the phone then I have lock screen no touch screen workings and usb connection working and message at top of screen usb file sharing . I did download minimal fastboot adb and when I tried to use it, I could get the phone to show fastboot usb, but it didnt have the usb connection active. Obviously I am noob please advise.
Click to expand...
Click to collapse
1. You should read this thread: HTC EVO 4G LTE Q&A, Help & Troubleshooting > Don't Panic -- Please Read First, includes troubleshooting guide.
2. Then check the HTC EVO 4G LTE Q&A, Help & Troubleshooting > FAQs - Massive Question Round Up Thread for Jewel [UPDATE: 11/5/2013] thread.
3. If you still have no answer for your question, please ask in the HTC EVO 4G LTE Q&A, Help & Troubleshooting forum.

Thread closed and thank you.