Database Info

Upgrade PDAMobiz Customized Rom for all IPL/SPL version

Note: This is a custom firmware but it is DEFINITELY the best and should have been a company of its own! Damned it isn't. It even lets your mono bluetooth headset listen to music!!!!!
ROM OF THE YEAR!!!
Since HTC issued new IPL/SPL version 2.xx.0001, all tools that we use to cook the customize rom to be a single nk.nbf file can not be used because nk.nbf structure are different from the previous version. We were trying to hard to solve the problem. Futunately, we found the new method that save and convenince, because it will not touch with bootloader. Just active sync prophet with pc then run UPGRADE_ROM.bat.
This method can be used with any version of IPL/SPL of SPV M600, Qtek S200, i-mate JAMin, Dopod 818 Pro, XDA neo. Need not to unlock CID.
DAMobiz Customized Rom can be download from here:
http://files.pdamobiz.com/ROMs/XDA/...n_Upgrade_Rom_for_IPLSPL_2.15.0001_v.1.02.rar
Step by step to upgrade rom
1. Backup all data in Prophet, then hard reset it. You can also use the method of Clear Storage in menu, Start -- Settings -- Clear Storage.
2. After Hard Reset, tap at the screen 1 time, and stop at Align Screen.
3. Plug usb cable at Prophet to start ActiveSync, then click at Cancel.
4. Prophet will connect with PC as Guest.
5. Go back to folder that you unrar (www.rarlab.com) then click at UPGRADE_ROM.bat.
Wait....
Wait.... It's now finished with extended rom, then the next is OS rom.
6. After finish, you may hard reset by press and hold at Camera and Voice Dial, then depress at reset. Still hold camera and voice dail until you get the screen as below:
Press at send to format, then it reboots.
At the buttom left, it shows "PDAMobiz.com" that is pdamobiz customized rom. To get all program of pdamobiz customized rom, you have to let extended rom program install until it complete.
PDAMobiz customized rom has only 3 Thailand operators, you may add your own file before upgrade rom to "extrom" PC folder and autoconfig.txt to have your own country autoconfig.
Plenty of wonderful software, you may see the whole pictcure at: (sorry there is no translation)
http://www.pdamobiz.com/forum/forum_posts.asp?TID=60019
If during upgrading you have some problem, and it stuck at bootloader 3 colors screen. Just download below files, run upgrade rom with that file, after you can boot normally, you can upgrade this customized rom again, becuase this customize rom need active sync only.
http://files.pdamobiz.com/ROMs/XDA/Prophet/RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship.exe
Thank you very much to itsme, the Administrator of http://www.spv-developers.com for his utilities, machinegod for enablerapi, buzz, the Admin of www.buzzdev.net for unlocker of prophet extended rom, RuChonburi for his customized rom.
By the way I make 3 very small utilities, those are sleep4 (wait 4 second), clattr.exe (clear file attribute of \extended_rom) and roattrib.exe (set read only attribute for files in extended rom), to automize the process to 1 click at UPGRADE_ROM.bat
Caution! There are some risks to upgrade rom, please use your own risk, we shall not responsible for any damage.
(TAKEN FROM A SITE CALLLED en.pdamobiz.com who created this ROM! They rock..forget about Imate roms and anything else! )

[Guys n' Gals - I've been asked to pin this. If you feel it doesn't need pinning, PM me. If you feel it's incorrect or misleading, let me know. If you are happy with it, comment below]

1. Anybody tried that on JAMin?
2. Any succes stories on DOWNGRADING back to JAMin Rom after this?
3. Is it FASTER(the overall working process) than latest I-mate's one?
4. Russian dialpad working with this one?
Not before i receive answers to that shall i try this out as if it's no satisfying on 3rd question there's no need in it for me, as i know how to install cabz myself, even though it may not be in 1 click, but since we're out of battery dead-data lost problem it's not a thing to worry anymore, and i cant say if i really need all that bunched into my tiny device.

1. Anybody tried that on JAMin? - YES!! ME!!!
2. Any succes stories on DOWNGRADING back to JAMin Rom after this? - You can never downgrade with Prophet after you hit the version 2.x systme without using 3rd party software roms.
3. Is it FASTER(the overall working process) than latest I-mate's one? - It autostarts with Omap clock at 240 speed and overall its about 3x faster than Imates latest 2.13 rom.
4. Russian dialpad working with this one?
- Yes
5. Note this - Battery Lasts longer (dont know how they did it. but it gave me 7 hours talk time compared to ImateJamins usual 4-5 NON STOP. weird...
More Notes - It has lots of nice software inside and basically makes you feel like its a fully loaded system and yet faster than ALL (Not just the last) Imate JamIn one. If you need my creditibility go to Imate jamin offiucial support forum (clubimate) and see my id shivam / shivamxp. Posted alot there before I dumped the Jamin Rom for this baby!
Not before i receive answers to that shall i try this out as if it's no satisfying on 3rd question there's no need in it for me, as i know how to install cabz myself, even though it may not be in 1 click, but since we're out of battery

ps - forgot to same . the exntended rom is also unlocked by default, a nice set of media players that play almost everything in video n music - mp4, divx ,etc. It has a great file manager. Bluetooth headset can grab any programs music or video whether it be media player or real media or some other program. basically all sound from ur device can get forwarded to ur MONO bluetooth (now even regular bts without stereo can get great sound n music).

Man, i DONT want device to start with omapclock and god, feels like u r so Xcited 'bout this that seems like YOU made this Rom. If there's no rollback, i pass it out.

http://en.pdamobiz.com/en/forum/PDAforum_posts.asp?TID=440&PN=1
are the guys who made it ...PDAMOBIZ...but i used it and was shocked to see it just so d*** good.
Ive used Prophet and seen it suck up as bad as an O2mini (no offence HTC Mag guys)...i used to have a o2mini ..moved to this and definitely both are sucky (speed n feature) just the compactness. Seeing this new rom, everything that made my views so negative are gone EXCEPT i still want a bigger screen the real vga..
anyways, dont install it if you dont wanna...just dont blame me if two weeks later theres a big hype and you say i didnt listen cuz i was too over occupied or wanted to wait...you can wait all you want...you sure wont lose anything..youll just be delaying your gain.
Look im comparing this rom against the current Roms of "Imate" and IMHO this rocks..sure wait as much as you want, but then again a guy who made similar posts earlier (check my post logs) about Imate Software and support on the forums there sucking...well your choice.

heyy shivam, looks promising, but can u possibly upload the rom somewhere? the link u supplied is ridiculously slow (1.3kb/s)
thx
lookin forward to trying this out as im not too impressed with my spv m600 after coming from the great jam

for the person who use XDA Neo, don't use this rom now as before using this rom, it is neccessary to unkock CID first, but the programmer of this rom said that he still haven't known how to unlock CID for device that has IPL 2.15.0001 and SPL 2.15.0001.Fortunately, he said that in a couple days, he will have a solution for this problem (to help you unlock CID) and then you will be able to use this rom on xda neo.
I have not much knowledge about this pda phone. However, I am Thai so that why I can understand all the topic in the original link of this rom. So I just want to translate this point to you guy to prevent you from wasting your time and any harm that might happen to your device.
Anyway, this rom is very good rom, have evreything you want, help your mobile much faster than before, and will help you a lot, so wait until programmer has solution for CID then upload it.

Has anyone with a Qtek S200 tried this?
I want to take the plunge and I have done lots and lots of ROM mods and upgrades to my former Himalaya and a friend's Blue Angel, but I would love to know if there is some way to backup my original ROM beforehand.
Thanks for the find tho!
P.S.- Can someone please upload this ROM to the XDADevs FTP????? the TX is really slooooooooow..... .4 kbps!!!
God bless!
Rayan

Ist it possible not to install some of the included programs ? (like vxutil, Regeditor, CallFilter, image maker, calculator,opera and Realplayer of course ...)
Like deleting them from the extrom before upgrading?
Reason is, that i already use some nice programs that i got used to, and i dont want to waste some extra memory on programs i will most likely not need.
Edit: any way to change the omap clock Startup MHz ?
Greetings

In order to avoid installing any unneeded software on the ExtROM, just Soft Reset just before they install after a Hard Reset.
Then you should go to the extended rom and manually install whatever apps you want by clicking on them.
Do you already downloaded this rom?
Can you please Upload it to the xda developers ftp?
That would be great...
Thanks!
Rayan

@Rayan - i know how to avoid installing the extrom - i was wondering if some of the programs are included in the normal rom.
Didn't download it yet - i will wait for some more experiences

Rayan said:
Can someone please upload this ROM to the XDADevs FTP????? the TX is really slooooooooow..... .4 kbps!!! [/b]
Rayan
Click to expand...
Click to collapse
Finished upload:
_ftp://[email protected]/Uploads/prophet-roms/Customize_rom_PDAMobiz_Editon_Upgrade_Rom_for_IPLSPL_2.15.0001_v.1.02.rar
G-Luck!-)

Thanks for the upload matey.

Howdy Boys and Girls
Well I took the leap and installed the Rom described here, on a new Imate Jamin I bought last week down here in Australia.
The existing Rom on the Jamin was the latest from the Imate website.
"JAMin_WWE_213923_2139123_022021_ship"
First of all let me say that after upgrading to the Pdamobiz version, I was able to restore the Rom back to the original Imate version.
That should answer the questions of a few wondering if it's not all it's made out to be you can always go back to what you had.
Onto the new Rom.
The Jamin I have according to Omapclock runs at 180Mhz. With this Rom it was running at 240Mhz and I can tell you now this Rom is SLOW, very SLOW. With the original Imate Rom installed clocked to 240Mhz it screams along very nicely.
Some of the Apps installed with this Rom are also commercial versions requiring purchasing or "other ways around purchasing".
In fact come to think of it most of the apps were pretty ****ty and neither here nor there. Just my opinion expressed here.
Ultimately it's up to the individual preferences here and I'm certainly not taking anything away from the people who spent the time putting it together. It's a good effort.
In the end I installed it ... had a play with it for an hour or so ... dumped the Rom onto an SD card and restored the orginal Rom.
When I get around to it I'll install a few of the goodies like the A2DP stereo audio and the Extended Rom patch. They work
Thanks to original poster for making this Rom available in the first place and the guys who put it together.
Now it's up to you
Regards to all

Thanks for the info, Nudester. I was about to install this one on my XDA Neo (running JAMin on it now), but stopped after I read your post. Also, I do not like the application programs in that ROM, too, since I have purchased much better programs already. Your info is very helpful. thanks.

lvlx said:
Rayan said:
Can someone please upload this ROM to the XDADevs FTP????? the TX is really slooooooooow..... .4 kbps!!! [/b]
Rayan
Click to expand...
Click to collapse
Finished upload:
_ftp://[email protected]/Uploads/prophet-roms/Customize_rom_PDAMobiz_Editon_Upgrade_Rom_for_IPLSPL_2.15.0001_v.1.02.rar
G-Luck!-)
Click to expand...
Click to collapse
Thanks lvlx!
I'll DL tonite!
Peace!

ok, i installed this (thx lvlx for the upload, that link was just agrhhhhhhh ), and for the most part, i agree with nudester. speed is ok, althought i was getting better/more stable operation with the latest dopod rom on which it is based when overclocked with omap clock. a lot of the utilities are on the rom, and not the extended rom which means u cant remove them, and to be honest, most are overkill, like the are about 4 different sim utilities, nevertheless, some are pretty damn good. however i just dont like havin stuff that i dont need/use.
PROS:
decent rom (stable and quick)
loads of cool utilities
downgradeable
good with storage memory
pre-configured with most of the registry edits for speed, gps, etc....
CONS:
some utilities/programs are trials/unregestered
most utilities/programs are built into the rom
overkill, i mean why do u need all that stuff anyways?
---did i keep it? -----> NO
id rather have a clean oem rom that id play with myself and install what i want.
fair play to the guys at pdamobiz.com for creating it, coz it is good, and it gave me a lot of ideas, but it just wasnt my cup of tea 8)

Hello Every One,
I installed the ROM and agree with Nudester. Please Nudester tell me how to go back and load my original imate JAMIN ROM.

Midget v0.1 Vanilla Crossbow Rom (Based on Helmi's Unreleased Rom)

Unknown to me, the 'clean' source i was given to make this ROM was actually heavily customized already to fix some major bugs and flaws by Helmi_C. He deserves the main credit for this ROM, but i will continue to keep it up to date - no hard feelings?
Hi, as you may know I've been here (xda-developers) for quite a while, In this time i have been learning the art form that is rom building, my teachers (at least i think of it like that include maimach (How can he be human?), Tuatara (God of all things WM5 on BA), Lt.Cmdr.Ivan, Helmi_c and many others (thanks everyone, sorry if i didnt mention you)
Finally in December 2006 i had a chance to use this knowledge i have gathered when i acquired a pre-release version of WM6 from a good friend (you know who you are ) Since then i've spent days tweaking and fixing bugs in this rom, i wanted to wait until it was perfect to release, but due to recent event s i think now would be the best time, so i present you with My first ROM for Universal and my First Crossbow rom...
Current State of things:
Bugs:
Video Calling doesn't work (im working on this - thanks bepe)
In REALvga mode (addon cab) if you have owner information or password set to display on boot then you will hang your device, hard reset needed. im stuck as to what is causing this, anyone got any ideas?
Occasionally after flashing the phone will reset into bootloader - not load OS. a quick "set 14 0" in mtty fixes this (again anyone got any ideas?)
Features:
Version 5.2.318 (Build 15341.0.0.0)
Most Stable Crossbow rom for universal (verified by two beta testers who have tried them all)
Free Storage 40mb
Free RAM 30mb
Cache Tweaks for Performance
New Comm Manager hacked for speed and look (WM6 Background)
No Bloat
Coming soon:
Video Call Drivers
AKU 0.1
Well i've rambled on too long here ill give you the links
Rapidshare.com:
http://rapidshare.com/files/12143324/midget_1990_v0_1_vanilla_wm6.rar.html
Addons:
REALvga mode (Read the bug above first!):
ftp://xda:[email protected]/Uploads/Universal/midget_1990/midget_1990_realvga_wm6.cab
Tweaks and hacks:
Includes: Oxios Close apps (great tool) and map to backlight button. (ability to change backlight button also)
A collection of IE tweaks for faster and more stable surfing
Enable b/g wifi mode
Set keyboard and audio priority to better values
Enable cleartype for both modes
Change cache sizes for faster device
ftp://xda:[email protected]/Uploads/Universal/midget_1990/midget_1990_tweaks_and_hacks.cab

BRAVO mate BRAVO
my 1st universal Rom upgrade and I am really happy with this one
Mainly because of the
MASSIVE 30 mb RAm
Cheers

anyone tried tomtom with it?
i wana try this tonight but cant find my god damn usb lead!

Tom Tom works great (both vga modes)

hello there midget... I thought u said that u hv 40mb ram?? U make me busy with ur statement there my friend...lol...
so basicly its a modify to vanila version and added vga functionality? well, if u dont mine send me ur default.hv let me see what difference that u make my friend...

I found one more problem. I tried to use oZVGA mode in this release and most of the icons disappeared. The taskbar became blank.. i couldnt see the start button. oZVGA doesnt work with this release of crossbow it seems.
Please try to fix that Midget.
Thanks Awesome release.

Thanx Midget

helmi_c said:
hello there midget... I thought u said that u have 40mb ram?? U make me busy with your statement there my friend...lol...
so basically its a modify to vanila version and added vga functionality? well, if u don't mine send me your default.hv let me see what difference that u make my friend...
Click to expand...
Click to collapse
I said 40?! that would be nice lol, must have been a typo
bear in mind that some of the tweaks are separate in the cab file i linked to.
try the comm manager too, its MUCH faster

nuclear said:
I found one more problem. I tried to use oZVGA mode in this release and most of the icons disappeared. The taskbar became blank.. i couldnt see the start button. oZVGA doesnt work with this release of crossbow it seems.
Please try to fix that Midget.
Thanks Awesome release.
Click to expand...
Click to collapse
did you read what i wrote?
you need to install my vga mode cab (i wanted to save space so i dnt include it) this install the icons etc and ozvga

Midget_1990 said:
I said 40?! that would be nice lol, must have been a typo
bear in mind that some of the tweaks are separate in the cab file i linked to.
try the comm manager too, its MUCH faster
Click to expand...
Click to collapse
yes u did!...lol... and I do everything... I means everything... the maximum size I get its 31-32mb something... lol... btw congrat mate...
hacked CommManager?? with what? upx it?

helmi_c said:
yes u did!...lol... and I do everything... I means everything... the maximum size I get its 31-32mb something... lol... btw congrat mate...
hacked CommManager?? with what? upx it?
Click to expand...
Click to collapse
reshacker to change the interface (new background, the buttons are still in the making - each button has 5 part so it takes time) to make it fit in with wm6 and upx

Why do I only get 26 of free mem?

Extended Rom is seen as a drive and Outlook use it to store mail attachment (impossible to change the storage used) For other office program you can use SD CARD.
And it's impossible to hide Extended Rom
So I use an empty extended Rom

I'm having issues to flash this rom.
When I click "Upgrade" button, my uni reboot, and i can't upgrade it.

symbol no more works

poussin69: if im not mistaken i set extrom to install from /storage card/extrom (sorry i forgot to mention that) i've only recently got my uni so i though /storage for attachments was normal, ill look into changing it for you
Also what is symbol?
ZeD:
1) are you connected via a hub? this is bad.
2) try putting in bootloader mode first
3) did you included RUU.conf?
4) no idea sorry

you have a sym.txt file in windows directory so, when you type
a and use the "sym key" you will switch to à
e to é è ê .....
it was working with WM5
(I change the keyboard country to french as usual (azerty keyboard))

Midget_1990 said:
ZeD:
1) are you connected via a hub? this is bad.
2) try putting in bootloader mode first
3) did you included RUU.conf?
4) no idea sorry
Click to expand...
Click to collapse
I have tried to put into bootloader first, but I cant upgrade. I included the RUU.conf.
I'm not using a usb hub also.
Maybie a old bootloader version?

Ok, I got it.
Flashing the rom now.
After i get the version of the rom on the upgrader I put the device on bootloader and press "Upgrade".

poussin69 said:
you have a sym.txt file in windows directory so, when you type
a and use the "sym key" you will switch to à
e to é è ê .....
it was working with WM5
(I change the keyboard country to french as usual (azerty keyboard))
Click to expand...
Click to collapse
hmm, i didnt even knew that existed ill try to add it for the next release

Little Help for First Time Cooker!

Hi There,
Ive been admiring the work of many here for a very long time.
I have owned a Blue Angel for about 18 months and a wizard since January.
The wizard has been flashed around 7 times in 4 weeks lol which is quite a bit for an HTC noob like me.
I have tried Orwells Rom (very stable for me) but then decided to upgrade to .mUn.'s rom as it was a newer version.
Unfortunately it wasnt quite as vanilla as I like.
Vanilla == No reg tweaks, No apps at all and no damned Cyberon!
Everytime I try to build myself a rom (tried Molski's kit and NotTooSmart's) I get a problem.
Dump decrypted NBA with Typhoon Tools
prepare_imgfs (with nosplit)
viewimgfs
hv > rgu
Added REGEDIT4 to the top line, saved as unicode, did everything correct as far as I know.
then back to hv's (yep right size, 750kb ish)
Then put it all back together. (incl the removal of bytes form initflashfiles.dat back to the first
1st Time with Molski's Kit = Booted fine, but would never load OS after a softreset
(few more attempts with the same kinda thing - failed )
Last time with NTS's kit = Stuck on the splash the IPL/SPL and would go no further.
Sorry for my ignorance, but what have I missed!
I hear about XIP sections and what have you, means very little to me!
I just want to build myself a rom on which I can mess around with :'(
Thanks Folks,
-Whiterat

When you remove the bytes from the front of the initfileflashes.dat file, what are you removing? It should just the FF, FE. Also, make sure you have English set in your regional and language options under the advanced tab.
If that fails, you may have a corrupt nk.nbf, since you've had BOTH kitchens fail. I would download a new ROM copy, dump and immediately rebuild and flash just to make sure you are properly going through that process. Then make one change at a time. It's time consuming I know, but you'll be wiser for the experience.
Peace,
JB

jwzg:
Thanks for taking the time to reply.
initflashfiles.dat should start with a ; (Since ; is used to remark lines) so I just remove back to that.
With regards to setting English, where abouts is the advanced tab? In what program even?
I did as you said with the nk.nbf and it goes on just fine without editting a thing
Its a pain testing these things, since I usually end up having to restore from SD which rewrites the extended rom, gsm, os, spash screen, htc screen,etc and then it takes ages for me to reflash my bits!
I can upload my rom if someone is willing to take a peek, see if I have missed something really obvious?

Too many files?
I had a similar issue (I think?) where everything seemed to work and the nk.nbf file was created OK. However there would be an error logged in the Windows Event Log about faulting an application. The resulting ROM image would install but I got a white screen following the reset (it made noises like it was working though). I followed the instructions for Molskis cooking tools to the letter and couldn't understand what the issue was I posted on here for some assistance but after I got no helpful replies I played around a bit more and realised the dump folder was slightly over 128MB (Size said less but I think it was over?). Anyway I removed some more files I didn't need and low and behold it all worked
I don't know what the absolute maximum size the dump folder can be, but I keep mine below 128,000,000 bytes....
HTH
Andy

ADB100 said:
...but I keep mine below 128,000,000 bytes....
HTH
Andy
Click to expand...
Click to collapse
Size on disk?

Whiterat said:
jwzg:
Thanks for taking the time to reply.
initflashfiles.dat should start with a ; (Since ; is used to remark lines) so I just remove back to that.
With regards to setting English, where abouts is the advanced tab? In what program even?
I did as you said with the nk.nbf and it goes on just fine without editting a thing
Its a pain testing these things, since I usually end up having to restore from SD which rewrites the extended rom, gsm, os, spash screen, htc screen,etc and then it takes ages for me to reflash my bits!
I can upload my rom if someone is willing to take a peek, see if I have missed something really obvious?
Click to expand...
Click to collapse
Not talking about that...
You have to open up initfileflashes.dat with a hex editor and remove the first two bytes (FF, FE). Then you can put the file back into the dump folder and build it.

jwzg said:
Size on disk?
Click to expand...
Click to collapse
The dump folder of the last one I cooked said:
Size: 121 MB (127,089,811 bytes)
Size on disk 131 MB (137,654,272 bytes)
And this worked fine, it was a re-heat of Faria's Real Thing ROM where I re-added VoIP & Windows Update (VoIP works but Windows Update won't and I can't figure out why - the application fails to connect to the MS site and won't close, but that's another story.......).
Andy

Yep I get that, I am a reverse engineer by trade so naturally I get what the manual had to say.
The limitation of imgfs is IF there are more than 1500 files being added to nk.nbf, the file size limitation also applies.
I am not adding any files to the dump, simply removing the cyberon stuff (and removing the microsoft callbacks, and sqm stuff)
Tried buling without removing sqm stuff and same thing.
I guess its just not going to be my thing

Here's what to do.
Delete the current 84000000-os.nb file in the ROMDUMP folder, then remake it. That should solve your problem. I forgot that I had the same problem.

Ahh I will give that a go
I was hoping to pick up a half broken wizard from ebay (broken digitiser/blocked/missing case/etc) and just use it as a tester, since I get alot of people whining when I am uncontactable for 90 mins
(About the right time to fiddle, flash and reinstall stuff)

Touch Software Collaboration

I wanted to get a thread dedicated to getting the applications out of the Touch .nb, and into the Wizard - and specifically the "cube" and "touch" functionality that is the trademark of the new phone.
Please save "oh, I'd like" or "oh, wow" stuff for other threads - this is a dev discussion.
Criteria: Working discussions on what's been done, what are we doing, and what could be done to get the excellent new features to work.
I hope that by sharing information - we can key in on the results much faster then everyone working on their own.

Software Packages
This post is a running list of applications, and their status:
Application............. .Status:
HTC Camera ............. .???
MediaHubMini ............. .???
QuickDial ............. .???
Streaming Media ............. .???
Streaming Player ............. .???
Cube ............. .French rom working, no WWE yet
Dialer Pad ............. .Done
Comm Manager ............. .Done
Today Home Theme ............. .Done
If someone can PM me who's current on this thread, I'll update the remaining items.
.

Kickoff Status
Here's what I've tried so far:
Using the 1413 as a base, I've taken and replaced the OEM folders from the touch build and replaced the 1413 folders -completly. This resulted in the phone self power cycling at the 3rd splash screen.
I've also taken the entire touch build, replaced the ROM contents with the one from 1413 (and I might have replaced the /SYS/OS folder as well - going off memory). This was the most successful, as I was able to boot the phone and get a lot of the touch's functionality. Issues were: SID Lock error, no "touch" function, and button mapping was wrong - only button 1 showed up on settings - buttons.

More info (a little)
Well, to follow up on my note in the other thread. I did pretty much what you did and ended up in the same place.
I did discover that the two other "raw" files in the original leak contained xip contents. I'm not sure why there are two of them, and they contain similar contents. I ran a build using the one I've labeled xip1 and it gave an error about missing build.rgu in buildos. I then ran a build using the one I labeled xip here (which has a build.rgu) and it built and booted, but worked essentially the same as when using an older wizard xip.
Anyway, time for bed now.
PS I tried to upload a zip of the two xip sections but it failed. Forum maintenance I suppose. Maybe I'll try again tomorrow if anyone seems interested.
Edit: Tried again to upload, failed.

I think we should start by the Dial Pad... I think it will be the easy thing to do.
Check this Hermes Rom:
http://wmblack.info/
and this:
http://www.4winmobile.com/forums/hermes-black-rom-support/9792-released-black-iv-shadow.html

Why not port the entire ROM ?
Just a thought.
BTW, from what I know, in order to make it work, you will have to use the XIP from the Wizard, not the one from Touch.
I have some work now...but i will try and do that bit later...today or tomorrow.

anichillus said:
Why not port the entire ROM ?
Just a thought.
BTW, from what I know, in order to make it work, you will have to use the XIP from the Wizard, not the one from Touch.
I have some work now...but i will try and do that bit later...today or tomorrow.
Click to expand...
Click to collapse
I also thought this... But now we have an official build from ms... I think it is a bit more stable than a ported version (if i'm wrong, please correct me).
@joaosousa:
I tried to port the Dialpad yesterday... But it seemed that I missed some needed files/registry hacks.... Still trying.
Vi

I also think we should keep the official build from ms... It's very stable...

any luck with touch dialer skin?

In all seriousness... the Today plug-ins for the HTC touch are fricking ugly.

Anything new in here?

joaosousa said:
Anything new in here?
Click to expand...
Click to collapse
Ya... I just flashed my wizard... Without the correct XIP partition -> stuck at 87% but bootloader works... so i think i'll get my wizard back
vi

omg... Hope all goes right with your wizard...

For those who want to play...
OK, for those who want to play with the Touch Rom, here's a rapidshare link to download a "working" nk.nbf. I've also included total commander, and a registry editor for those who might want to tinker with getting things to work.
The main issues are these:
1) Pull the sim card before flashing, or you won't be able to to get to the today screen.
2) Since the elf is only a one button machine, most of the buttons do nothing, including the power button. You'll have to take out the battery to turn it off. (Unless you can figure out the registry changes needed to make it work.)
3) Don't worry about setting your timezone in the initial screen. You can set it later from the settings menu.
4) Be ready to flash back from bootloader mode when you're done exploring!
5) I pulled adobe acrobat, catalog, autoupdate. Everything else is pretty much stock. So you can get a feel for what's included, and what you might want to pull for use in the Wizard!
This is OS only.
Have fun!
Rapidshare Link: http://rapidshare.com/files/36574080/TouchROM-nk.nbf.rar

Here's a question to those who have tried it so far: has anyone seen it working, or know which application controls the 'cube' function? Is it the biotouch app?

edhaas said:
OK, for those who want to play with the Touch Rom, here's a rapidshare link to download a "working" nk.nbf. I've also included total commander, and a registry editor for those who might want to tinker with getting things to work.
The main issues are these:
1) Pull the sim card before flashing, or you won't be able to to get to the today screen.
2) Since the elf is only a one button machine, most of the buttons do nothing, including the power button. You'll have to take out the battery to turn it off. (Unless you can figure out the registry changes needed to make it work.)
3) Don't worry about setting your timezone in the initial screen. You can set it later from the settings menu.
4) Be ready to flash back from bootloader mode when you're done exploring!
5) I pulled adobe acrobat, catalog, autoupdate. Everything else is pretty much stock. So you can get a feel for what's included, and what you might want to pull for use in the Wizard!
This is OS only.
Have fun!
Rapidshare Link: http://rapidshare.com/files/36574080/TouchROM-nk.nbf.rar
Click to expand...
Click to collapse
what do you mean of working nbf, did you mean it is Touch fully rom, or mixed with wizard rom??

anichillus said:
Why not port the entire ROM ?
Just a thought.
BTW, from what I know, in order to make it work, you will have to use the XIP from the Wizard, not the one from Touch.
I have some work now...but i will try and do that bit later...today or tomorrow.
Click to expand...
Click to collapse
Yes, understood. I think the fact that it works just as well with either XIP just shows how similar the two machines actually are. Either that, or whoever "leaked" the rom included an appropriate XIP on purpose.

its right said:
what do you mean of working nbf, did you mean it is Touch fully rom, or mixed with wizard rom??
Click to expand...
Click to collapse
Fully Touch Rom. But it has been restructured to fit inside the partition settings of the Wizard.

mattk_r said:
Here's a question to those who have tried it so far: has anyone seen it working, or know which application controls the 'cube' function? Is it the biotouch app?
Click to expand...
Click to collapse
For me it didn't work. Did you notice a kind of "klick" every 2 - 5 seconds? it sounds like if the speaker are turnend on and off...
Vi

its right said:
what do you mean of working nbf, did you mean it is Touch fully rom, or mixed with wizard rom??
Click to expand...
Click to collapse
The SYS and OEM folders from Touch, the ROM folder from 1413 (going off assumption here - correct me if I'm wrong )

Japanese on WM5?

Sorry for the newbie question, but I'm very confused right now ^^; even after a search on the forum I still don't know how to do this
I have a Mio A701, and I have a few mp3 files with japanese tags. I have installed a japanese font (I think I did it right), but WMP still doesn't display them correctly. I installed LetsJapanNo5 and it worked, but the hardware buttons stopped working and made the ppc crash too much, so I ended up uninstalling it.
So, can anyone explain to me how to exactly have japanese characters correctly displayed, without having to use another ROM?
Thank you very much for any reply, and sorry if I made a useless thread

Just some clues on how to get started as I don't have the time to search around for the links now - Search for
FotgottenNationsNo5.cab (no typo)
MSGothic Font for WM5.cab
and IME_31J_F.cab / IME_31J_QVGA_F.cab if you also want to write Japanese. Install everything to your device (not the storage card) and you should be fine without LetsJapanNo5x.cab. I got it working under WM5 and WM6. Thanks to Asukal for his great work - you rock!

Thank you for your quick reply.
I didn't find MSGothic for WM5, at least in cab or exe format (didn't really want to mess with the registry), but I installed echinaNO5 anyway, and then FotgottenNationsNo5.cab. While my ppc doesn't crash so often now, the hardware buttons still don't work, but as soon as I remove FotgottenNations it starts working again
Is there any way of solving this?