Related
Note: This is a custom firmware but it is DEFINITELY the best and should have been a company of its own! Damned it isn't. It even lets your mono bluetooth headset listen to music!!!!!
ROM OF THE YEAR!!!
Since HTC issued new IPL/SPL version 2.xx.0001, all tools that we use to cook the customize rom to be a single nk.nbf file can not be used because nk.nbf structure are different from the previous version. We were trying to hard to solve the problem. Futunately, we found the new method that save and convenince, because it will not touch with bootloader. Just active sync prophet with pc then run UPGRADE_ROM.bat.
This method can be used with any version of IPL/SPL of SPV M600, Qtek S200, i-mate JAMin, Dopod 818 Pro, XDA neo. Need not to unlock CID.
DAMobiz Customized Rom can be download from here:
http://files.pdamobiz.com/ROMs/XDA/...n_Upgrade_Rom_for_IPLSPL_2.15.0001_v.1.02.rar
Step by step to upgrade rom
1. Backup all data in Prophet, then hard reset it. You can also use the method of Clear Storage in menu, Start -- Settings -- Clear Storage.
2. After Hard Reset, tap at the screen 1 time, and stop at Align Screen.
3. Plug usb cable at Prophet to start ActiveSync, then click at Cancel.
4. Prophet will connect with PC as Guest.
5. Go back to folder that you unrar (www.rarlab.com) then click at UPGRADE_ROM.bat.
Wait....
Wait.... It's now finished with extended rom, then the next is OS rom.
6. After finish, you may hard reset by press and hold at Camera and Voice Dial, then depress at reset. Still hold camera and voice dail until you get the screen as below:
Press at send to format, then it reboots.
At the buttom left, it shows "PDAMobiz.com" that is pdamobiz customized rom. To get all program of pdamobiz customized rom, you have to let extended rom program install until it complete.
PDAMobiz customized rom has only 3 Thailand operators, you may add your own file before upgrade rom to "extrom" PC folder and autoconfig.txt to have your own country autoconfig.
Plenty of wonderful software, you may see the whole pictcure at: (sorry there is no translation)
http://www.pdamobiz.com/forum/forum_posts.asp?TID=60019
If during upgrading you have some problem, and it stuck at bootloader 3 colors screen. Just download below files, run upgrade rom with that file, after you can boot normally, you can upgrade this customized rom again, becuase this customize rom need active sync only.
http://files.pdamobiz.com/ROMs/XDA/Prophet/RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship.exe
Thank you very much to itsme, the Administrator of http://www.spv-developers.com for his utilities, machinegod for enablerapi, buzz, the Admin of www.buzzdev.net for unlocker of prophet extended rom, RuChonburi for his customized rom.
By the way I make 3 very small utilities, those are sleep4 (wait 4 second), clattr.exe (clear file attribute of \extended_rom) and roattrib.exe (set read only attribute for files in extended rom), to automize the process to 1 click at UPGRADE_ROM.bat
Caution! There are some risks to upgrade rom, please use your own risk, we shall not responsible for any damage.
(TAKEN FROM A SITE CALLLED en.pdamobiz.com who created this ROM! They rock..forget about Imate roms and anything else! )
[Guys n' Gals - I've been asked to pin this. If you feel it doesn't need pinning, PM me. If you feel it's incorrect or misleading, let me know. If you are happy with it, comment below]
1. Anybody tried that on JAMin?
2. Any succes stories on DOWNGRADING back to JAMin Rom after this?
3. Is it FASTER(the overall working process) than latest I-mate's one?
4. Russian dialpad working with this one?
Not before i receive answers to that shall i try this out as if it's no satisfying on 3rd question there's no need in it for me, as i know how to install cabz myself, even though it may not be in 1 click, but since we're out of battery dead-data lost problem it's not a thing to worry anymore, and i cant say if i really need all that bunched into my tiny device.
1. Anybody tried that on JAMin? - YES!! ME!!!
2. Any succes stories on DOWNGRADING back to JAMin Rom after this? - You can never downgrade with Prophet after you hit the version 2.x systme without using 3rd party software roms.
3. Is it FASTER(the overall working process) than latest I-mate's one? - It autostarts with Omap clock at 240 speed and overall its about 3x faster than Imates latest 2.13 rom.
4. Russian dialpad working with this one?
- Yes
5. Note this - Battery Lasts longer (dont know how they did it. but it gave me 7 hours talk time compared to ImateJamins usual 4-5 NON STOP. weird...
More Notes - It has lots of nice software inside and basically makes you feel like its a fully loaded system and yet faster than ALL (Not just the last) Imate JamIn one. If you need my creditibility go to Imate jamin offiucial support forum (clubimate) and see my id shivam / shivamxp. Posted alot there before I dumped the Jamin Rom for this baby!
Not before i receive answers to that shall i try this out as if it's no satisfying on 3rd question there's no need in it for me, as i know how to install cabz myself, even though it may not be in 1 click, but since we're out of battery
ps - forgot to same . the exntended rom is also unlocked by default, a nice set of media players that play almost everything in video n music - mp4, divx ,etc. It has a great file manager. Bluetooth headset can grab any programs music or video whether it be media player or real media or some other program. basically all sound from ur device can get forwarded to ur MONO bluetooth (now even regular bts without stereo can get great sound n music).
Man, i DONT want device to start with omapclock and god, feels like u r so Xcited 'bout this that seems like YOU made this Rom. If there's no rollback, i pass it out.
http://en.pdamobiz.com/en/forum/PDAforum_posts.asp?TID=440&PN=1
are the guys who made it ...PDAMOBIZ...but i used it and was shocked to see it just so d*** good.
Ive used Prophet and seen it suck up as bad as an O2mini (no offence HTC Mag guys)...i used to have a o2mini ..moved to this and definitely both are sucky (speed n feature) just the compactness. Seeing this new rom, everything that made my views so negative are gone EXCEPT i still want a bigger screen the real vga..
anyways, dont install it if you dont wanna...just dont blame me if two weeks later theres a big hype and you say i didnt listen cuz i was too over occupied or wanted to wait...you can wait all you want...you sure wont lose anything..youll just be delaying your gain.
Look im comparing this rom against the current Roms of "Imate" and IMHO this rocks..sure wait as much as you want, but then again a guy who made similar posts earlier (check my post logs) about Imate Software and support on the forums there sucking...well your choice.
heyy shivam, looks promising, but can u possibly upload the rom somewhere? the link u supplied is ridiculously slow (1.3kb/s)
thx
lookin forward to trying this out as im not too impressed with my spv m600 after coming from the great jam
for the person who use XDA Neo, don't use this rom now as before using this rom, it is neccessary to unkock CID first, but the programmer of this rom said that he still haven't known how to unlock CID for device that has IPL 2.15.0001 and SPL 2.15.0001.Fortunately, he said that in a couple days, he will have a solution for this problem (to help you unlock CID) and then you will be able to use this rom on xda neo.
I have not much knowledge about this pda phone. However, I am Thai so that why I can understand all the topic in the original link of this rom. So I just want to translate this point to you guy to prevent you from wasting your time and any harm that might happen to your device.
Anyway, this rom is very good rom, have evreything you want, help your mobile much faster than before, and will help you a lot, so wait until programmer has solution for CID then upload it.
Has anyone with a Qtek S200 tried this?
I want to take the plunge and I have done lots and lots of ROM mods and upgrades to my former Himalaya and a friend's Blue Angel, but I would love to know if there is some way to backup my original ROM beforehand.
Thanks for the find tho!
P.S.- Can someone please upload this ROM to the XDADevs FTP????? the TX is really slooooooooow..... .4 kbps!!!
God bless!
Rayan
Ist it possible not to install some of the included programs ? (like vxutil, Regeditor, CallFilter, image maker, calculator,opera and Realplayer of course ...)
Like deleting them from the extrom before upgrading?
Reason is, that i already use some nice programs that i got used to, and i dont want to waste some extra memory on programs i will most likely not need.
Edit: any way to change the omap clock Startup MHz ?
Greetings
In order to avoid installing any unneeded software on the ExtROM, just Soft Reset just before they install after a Hard Reset.
Then you should go to the extended rom and manually install whatever apps you want by clicking on them.
Do you already downloaded this rom?
Can you please Upload it to the xda developers ftp?
That would be great...
Thanks!
Rayan
@Rayan - i know how to avoid installing the extrom - i was wondering if some of the programs are included in the normal rom.
Didn't download it yet - i will wait for some more experiences
Rayan said:
Can someone please upload this ROM to the XDADevs FTP????? the TX is really slooooooooow..... .4 kbps!!! [/b]
Rayan
Click to expand...
Click to collapse
Finished upload:
_ftp://[email protected]/Uploads/prophet-roms/Customize_rom_PDAMobiz_Editon_Upgrade_Rom_for_IPLSPL_2.15.0001_v.1.02.rar
G-Luck!-)
Thanks for the upload matey.
Howdy Boys and Girls
Well I took the leap and installed the Rom described here, on a new Imate Jamin I bought last week down here in Australia.
The existing Rom on the Jamin was the latest from the Imate website.
"JAMin_WWE_213923_2139123_022021_ship"
First of all let me say that after upgrading to the Pdamobiz version, I was able to restore the Rom back to the original Imate version.
That should answer the questions of a few wondering if it's not all it's made out to be you can always go back to what you had.
Onto the new Rom.
The Jamin I have according to Omapclock runs at 180Mhz. With this Rom it was running at 240Mhz and I can tell you now this Rom is SLOW, very SLOW. With the original Imate Rom installed clocked to 240Mhz it screams along very nicely.
Some of the Apps installed with this Rom are also commercial versions requiring purchasing or "other ways around purchasing".
In fact come to think of it most of the apps were pretty ****ty and neither here nor there. Just my opinion expressed here.
Ultimately it's up to the individual preferences here and I'm certainly not taking anything away from the people who spent the time putting it together. It's a good effort.
In the end I installed it ... had a play with it for an hour or so ... dumped the Rom onto an SD card and restored the orginal Rom.
When I get around to it I'll install a few of the goodies like the A2DP stereo audio and the Extended Rom patch. They work
Thanks to original poster for making this Rom available in the first place and the guys who put it together.
Now it's up to you
Regards to all
Thanks for the info, Nudester. I was about to install this one on my XDA Neo (running JAMin on it now), but stopped after I read your post. Also, I do not like the application programs in that ROM, too, since I have purchased much better programs already. Your info is very helpful. thanks.
lvlx said:
Rayan said:
Can someone please upload this ROM to the XDADevs FTP????? the TX is really slooooooooow..... .4 kbps!!! [/b]
Rayan
Click to expand...
Click to collapse
Finished upload:
_ftp://[email protected]/Uploads/prophet-roms/Customize_rom_PDAMobiz_Editon_Upgrade_Rom_for_IPLSPL_2.15.0001_v.1.02.rar
G-Luck!-)
Click to expand...
Click to collapse
Thanks lvlx!
I'll DL tonite!
Peace!
ok, i installed this (thx lvlx for the upload, that link was just agrhhhhhhh ), and for the most part, i agree with nudester. speed is ok, althought i was getting better/more stable operation with the latest dopod rom on which it is based when overclocked with omap clock. a lot of the utilities are on the rom, and not the extended rom which means u cant remove them, and to be honest, most are overkill, like the are about 4 different sim utilities, nevertheless, some are pretty damn good. however i just dont like havin stuff that i dont need/use.
PROS:
decent rom (stable and quick)
loads of cool utilities
downgradeable
good with storage memory
pre-configured with most of the registry edits for speed, gps, etc....
CONS:
some utilities/programs are trials/unregestered
most utilities/programs are built into the rom
overkill, i mean why do u need all that stuff anyways?
---did i keep it? -----> NO
id rather have a clean oem rom that id play with myself and install what i want.
fair play to the guys at pdamobiz.com for creating it, coz it is good, and it gave me a lot of ideas, but it just wasnt my cup of tea 8)
Hello Every One,
I installed the ROM and agree with Nudester. Please Nudester tell me how to go back and load my original imate JAMIN ROM.
faria is back!
ftp://xda:[email protected]/Uploads/WIZARD/ROMS/untitled.JPG screenshots....
version [os] 5.2.318
Build aku 15341 aku.4.0.0.01 WWE
Ipl version ----
Spl version -----
Radio version recommended 2.19
Extended ROM version Faria v5
Htc logo Faria
Splash screen Faria
Page-pool- 6mb [original 12] 30mb free ram.
YOU MUST HAVE A BOOTLOADE VERSION 2XXX OR ABOVE...
ROM changes
Active sync fixed
Sofkey lag fixed
Voice command fixed
Windows live fixed
Added to the ROM;
Extended_rom added and fully working
Poket RAR
Windows live mail set to download double of the current size email.
Windows live/voice command –by default
BT SIM ACCESS PROFILE.
Camera 3.3 fully working
Media files support added plus new gif engine
New com manager -With option to turn IR on/of!!!
All wireless’ security profiles support added
HTC X [press and old to close activated]
Flash player 7
M&Msarc-soft 3.5.1.22.c
Java v11.1.7.1023
New Sim services app [stk]
Phone pad T9 [English ant Portuguese only] others dlls languages can be supplied upon request.
Sim card manager v 5.22
Replaced BT stereo profile with 3.3
Windows live search uk and US
Office mobile new layout
Registry mods;
4 ways navigation added
File explorer set to view all files
AD2P set to stereo
AD2P bit pool set to 60
Different gprs icon
Bypassed welcome screen [no more copy and paste]
Wireless today plug in and redirect app
Mms folder activated
Disabled Microsoft feedback
Time zones change page activated
Disabled ussd service
Disabled error reporting
Faria Clear type font
Cab set to not delete after install
Gprs bubble timer and disconnect button
Internet explorer Java support
Gprs workaround fix
Time zone page on and checked
GPS icon on
Clear type on, landscape and internet explorer
Obex on
GPS com port fix
One line time in today [not lvm]
Internet cache moved to storage card
Time in all pages
Wireless 54g support added
Wireless preload status on upon boot.
Removed from the ROM
VOIP removed
DRM removed
SECURITY removed
Windows update removed
Scq removed
Windows catalogue removed
Bluetooth hdi removed [BT mouse/keyboard support]
Third party apps
BT sim card access profile
Adobe le reader
Startup manager
Battery status
Today agenda
Dotfred Contacts manager plug in
Dotfred Contact backup
File AS contact plug in
Total commander
Dotfred task-manager+registry editor
Phm tray icon
Sms backup
Omap clock
Smartkey [in program files]
Ringtone plug-in
New menu plug in [control panel]
Mobile secretary [control panel]
Windows live search
.ini files associated to notepad [now u can edit your Smartkey .ini in the pocket pc]
My documents plug in programs
My docs retriever plug in [in my documents]
Favorite’s shortcut [in my documents]
Time sync in control paned
Registry wizard in control paned
Extra Tray icons—the tray icons are managed by battery-status, got to options to enable/disable or add and remove them.
Bluetooth manager
Memory manager
Device lock
Reset app.
From the extended rom
Extras folder [my documents]
Dictionary manager, wififofum, spb to play, ppc vault, call recorder, smart key enable, and live search US
This cabs can be run from the folder called “extras” from my documents. Please note if you have a g4 that is unable to write to the extended rom this app will not be available
Xnview running from the extended rom
Know issues and recommendations;
No performance tweaks needed in my opinion
I recommend over clocking the rom [battery-status] to 247 MHz instead of applying performance tweaks ,performance tweaks take away ram…….were over clocking comes at very little loss of battery especially if you use the auto scale function.
THIS rom has no parts from any current wm6 rom,this is a real WWE wizard rom ,all the parts needed to make it as a full rom were sourced from my 3.3.
Battery status cannot be configured from today options control panel…….but you can configure it by pressing and holding the battery icon in battery-status today plug in.
the rom may be bit slower because i did not applied any performance tweaks....plus the rom is fully loaded so we cant compare to other roms.....i mean this roms has everything working.....its like comparing a loaded truck to an empty one..
the device may crash when it reboots for the first time at the welcome screen if you don't tap it straight away....just reset the device with the stylus and it will be fine. this is because there is apps loading in the background.
a vanilha version will be released soon.
many thanks to mamaich BEPE AND dr.P FOR ALL THE Support and all the authors/xda of the freware apps.... a specialy.....my wife that lend her wizard to me in order to finish this rom,and for putting up with the many hours i ignored her.....
download from here;http://dl.dropbox.com/u/7696581/htc%20wizard/Roms/CB-AIRAF-CB-AIRAF-the%20real%20thing.rar
and here are some fixes for the rom and request.
caps lock fix
extended-rom files for those who need it
windows live fix
speed dialer from 3.3 FILE MISSING, TRYING TO FIND A COPY.
16 languages for the phone pad [chose your and copy to windows]
Thanks!
Had put yesterday MBE... Gotta try this one now!
BTW,
THIS rom has no parts from any current wm6 rom,this is a real WWE wizard rom ,all the parts needed to make it as a full rom were sourced from my 3.3.
Click to expand...
Click to collapse
You mean it doesn't share modifications that were present in other WM6 roms, that yours comes from a clean WM6 and you added your own stuff?
Or that it's not a WM6 core...?
Got a bit lost reading, sorry.
Ka.
Downloading now...... Screw my own release.....
LOL faria and Molski are gods in my book.
new rom with many fix yeah
Tnx Faria..Going to download it... ;-)
Faria,
can i upgrade to this rom using my Vista Ultimate?
Previously i could not upgrade to to WM6 with Vista. had to use my XP to do it.
Thanks
P.S. Is this coocked final version WM6?
Can someone upload to different location. I cant seem to download it from rapishare. Thanks
Oh Yeah,
Great Faria i downing it right now
If its even better then your 3.3 with 8mb pagepool well then it is terrific
with the greatest respect.
thankx
kast said:
Thanks!
Had put yesterday MBE... Gotta try this one now!
BTW,
You mean it doesn't share modifications that were present in other WM6 roms, that yours comes from a clean WM6 and you added your own stuff?
Or that it's not a WM6 core...?
Got a bit lost reading, sorry.
Ka.
Click to expand...
Click to collapse
yes this rom has nothing to do with any prereleased wizard rom,or parts.
kyakubov said:
Faria,
can i upgrade to this rom using my Vista Ultimate?
Previously i could not upgrade to to WM6 with Vista. had to use my XP to do it.
Thanks
P.S. Is this coocked final version WM6?
Click to expand...
Click to collapse
no....we been unable to crack the vista update utiility so far.....
kyakubov said:
can i upgrade to this rom using my Vista Ultimate?
Click to expand...
Click to collapse
The ROM image doesn't really care whether you're using Windows XP or Windows Vista. Without knowing the details, I'm guessing that the problems you're having have to do with the new security "features" of Windows Vista.
What you'll need to do is once you've downloaded the ROM image to a location on your local hard drive, right-click on the file and select "Run as Administrator". You will be prompted to "Allow" or "Cancel", select "Allow" and you should be OK from that point forward.
Dwimmerlaik said:
The ROM image doesn't really care whether you're using Windows XP or Windows Vista. Without knowing the details, I'm guessing that the problems you're having have to do with the new security "features" of Windows Vista.
What you'll need to do is once you've downloaded the ROM image to a location on your local hard drive, right-click on the file and select "Run as Administrator". You will be prompted to "Allow" or "Cancel", select "Allow" and you should be OK from that point forward.
Click to expand...
Click to collapse
Not really, the problem I had was , it started to upgrade and when the phone restarted and the rainbow appeared the connection was lost between PC and phone.
I hope I was able to explain it correctly.
Thanks Faria for your reply.
Am I allowed a joke?
It could be a bit scary to see a new rom published and read the following in your signature:
HTC WIZARD ON REPAIR
Click to expand...
Click to collapse
No offense meant, just joking, we all know quality of your roms.
Ka.
kyakubov said:
Not really, the problem I had was , it started to upgrade and when the phone restarted and the rainbow appeared the connection was lost between PC and phone.
I hope I was able to explain it correctly.
Click to expand...
Click to collapse
The issue you are havings is a known issue. The flash utility looks for ActiveSync, and since Vista does not use ActiveSync but its own mess, you wont be able to flash with Vista.
Can anyone provide a mirror link?
Ok before Faria gets slammed with posts about the flash freezing at 99%.... this is normal. All ROM's (Even releases by HTC or your carrier) have a point when it looks frozen but its not.
Also one thing I have seen is that people expect these things to be perfect OOB (out of box), this is never the case. There will always be a few little kinks and if you read the forum you will either find the answer in this post or another. So read before you post.
On another note, faria I love this release. So far no issues seen, but i will run the phone hardcore as i usually do to see if there are any issues. Thanks again for all your hardwork in putting this release out.
Some people who where trying to update to WM6 on Smartphones like Dash had a problem with "Invalid Code ID"... (me as well).
The procedure to solve the prob was to use the "Unlocker" program provided by some companies, disconnect cable when it asked for a file, close the program and continue to flash with "modded files" (the modded files were specific to the "vendor ID" prob).
Whe you run the unlocker, ActiveSync disconnects, at least looks so.
In this case my "noobish" mind could think the unlocker is actually handling by itself the connection... In this case, using this procedure, it should be possible to run the upgrade even from Vista.
On the other hand, the unlocker might just disconnect ActiveSync but still be using MS drivers, which are probably different in Vista.
Maybe I'm not used to think and I'm just saying nonsense.
Ka.
Zer0 said:
Can anyone provide a mirror link?
Click to expand...
Click to collapse
Appreciate it if someone would provide a mirror link. Thanks
Crossbow WWE
AHHHHHHH!!!.. My prayers have been answered.
Thank You
Faria.
Question why remove the pdf reader. I like the Adobe ( i get alot of attachments daily)
daddy_yankee1980 said:
Appreciate it if someone would provide a mirror link. Thanks
Click to expand...
Click to collapse
Rapid works just fine...
--M
I wanted to get a thread dedicated to getting the applications out of the Touch .nb, and into the Wizard - and specifically the "cube" and "touch" functionality that is the trademark of the new phone.
Please save "oh, I'd like" or "oh, wow" stuff for other threads - this is a dev discussion.
Criteria: Working discussions on what's been done, what are we doing, and what could be done to get the excellent new features to work.
I hope that by sharing information - we can key in on the results much faster then everyone working on their own.
Software Packages
This post is a running list of applications, and their status:
Application............. .Status:
HTC Camera ............. .???
MediaHubMini ............. .???
QuickDial ............. .???
Streaming Media ............. .???
Streaming Player ............. .???
Cube ............. .French rom working, no WWE yet
Dialer Pad ............. .Done
Comm Manager ............. .Done
Today Home Theme ............. .Done
If someone can PM me who's current on this thread, I'll update the remaining items.
.
Kickoff Status
Here's what I've tried so far:
Using the 1413 as a base, I've taken and replaced the OEM folders from the touch build and replaced the 1413 folders -completly. This resulted in the phone self power cycling at the 3rd splash screen.
I've also taken the entire touch build, replaced the ROM contents with the one from 1413 (and I might have replaced the /SYS/OS folder as well - going off memory). This was the most successful, as I was able to boot the phone and get a lot of the touch's functionality. Issues were: SID Lock error, no "touch" function, and button mapping was wrong - only button 1 showed up on settings - buttons.
More info (a little)
Well, to follow up on my note in the other thread. I did pretty much what you did and ended up in the same place.
I did discover that the two other "raw" files in the original leak contained xip contents. I'm not sure why there are two of them, and they contain similar contents. I ran a build using the one I've labeled xip1 and it gave an error about missing build.rgu in buildos. I then ran a build using the one I labeled xip here (which has a build.rgu) and it built and booted, but worked essentially the same as when using an older wizard xip.
Anyway, time for bed now.
PS I tried to upload a zip of the two xip sections but it failed. Forum maintenance I suppose. Maybe I'll try again tomorrow if anyone seems interested.
Edit: Tried again to upload, failed.
I think we should start by the Dial Pad... I think it will be the easy thing to do.
Check this Hermes Rom:
http://wmblack.info/
and this:
http://www.4winmobile.com/forums/hermes-black-rom-support/9792-released-black-iv-shadow.html
Why not port the entire ROM ?
Just a thought.
BTW, from what I know, in order to make it work, you will have to use the XIP from the Wizard, not the one from Touch.
I have some work now...but i will try and do that bit later...today or tomorrow.
anichillus said:
Why not port the entire ROM ?
Just a thought.
BTW, from what I know, in order to make it work, you will have to use the XIP from the Wizard, not the one from Touch.
I have some work now...but i will try and do that bit later...today or tomorrow.
Click to expand...
Click to collapse
I also thought this... But now we have an official build from ms... I think it is a bit more stable than a ported version (if i'm wrong, please correct me).
@joaosousa:
I tried to port the Dialpad yesterday... But it seemed that I missed some needed files/registry hacks.... Still trying.
Vi
I also think we should keep the official build from ms... It's very stable...
any luck with touch dialer skin?
In all seriousness... the Today plug-ins for the HTC touch are fricking ugly.
Anything new in here?
joaosousa said:
Anything new in here?
Click to expand...
Click to collapse
Ya... I just flashed my wizard... Without the correct XIP partition -> stuck at 87% but bootloader works... so i think i'll get my wizard back
vi
omg... Hope all goes right with your wizard...
For those who want to play...
OK, for those who want to play with the Touch Rom, here's a rapidshare link to download a "working" nk.nbf. I've also included total commander, and a registry editor for those who might want to tinker with getting things to work.
The main issues are these:
1) Pull the sim card before flashing, or you won't be able to to get to the today screen.
2) Since the elf is only a one button machine, most of the buttons do nothing, including the power button. You'll have to take out the battery to turn it off. (Unless you can figure out the registry changes needed to make it work.)
3) Don't worry about setting your timezone in the initial screen. You can set it later from the settings menu.
4) Be ready to flash back from bootloader mode when you're done exploring!
5) I pulled adobe acrobat, catalog, autoupdate. Everything else is pretty much stock. So you can get a feel for what's included, and what you might want to pull for use in the Wizard!
This is OS only.
Have fun!
Rapidshare Link: http://rapidshare.com/files/36574080/TouchROM-nk.nbf.rar
Here's a question to those who have tried it so far: has anyone seen it working, or know which application controls the 'cube' function? Is it the biotouch app?
edhaas said:
OK, for those who want to play with the Touch Rom, here's a rapidshare link to download a "working" nk.nbf. I've also included total commander, and a registry editor for those who might want to tinker with getting things to work.
The main issues are these:
1) Pull the sim card before flashing, or you won't be able to to get to the today screen.
2) Since the elf is only a one button machine, most of the buttons do nothing, including the power button. You'll have to take out the battery to turn it off. (Unless you can figure out the registry changes needed to make it work.)
3) Don't worry about setting your timezone in the initial screen. You can set it later from the settings menu.
4) Be ready to flash back from bootloader mode when you're done exploring!
5) I pulled adobe acrobat, catalog, autoupdate. Everything else is pretty much stock. So you can get a feel for what's included, and what you might want to pull for use in the Wizard!
This is OS only.
Have fun!
Rapidshare Link: http://rapidshare.com/files/36574080/TouchROM-nk.nbf.rar
Click to expand...
Click to collapse
what do you mean of working nbf, did you mean it is Touch fully rom, or mixed with wizard rom??
anichillus said:
Why not port the entire ROM ?
Just a thought.
BTW, from what I know, in order to make it work, you will have to use the XIP from the Wizard, not the one from Touch.
I have some work now...but i will try and do that bit later...today or tomorrow.
Click to expand...
Click to collapse
Yes, understood. I think the fact that it works just as well with either XIP just shows how similar the two machines actually are. Either that, or whoever "leaked" the rom included an appropriate XIP on purpose.
its right said:
what do you mean of working nbf, did you mean it is Touch fully rom, or mixed with wizard rom??
Click to expand...
Click to collapse
Fully Touch Rom. But it has been restructured to fit inside the partition settings of the Wizard.
mattk_r said:
Here's a question to those who have tried it so far: has anyone seen it working, or know which application controls the 'cube' function? Is it the biotouch app?
Click to expand...
Click to collapse
For me it didn't work. Did you notice a kind of "klick" every 2 - 5 seconds? it sounds like if the speaker are turnend on and off...
Vi
its right said:
what do you mean of working nbf, did you mean it is Touch fully rom, or mixed with wizard rom??
Click to expand...
Click to collapse
The SYS and OEM folders from Touch, the ROM folder from 1413 (going off assumption here - correct me if I'm wrong )
Hello XDA! Let's start off with a few thanks. Pof, Jscepi, Kyphur, Bepe, XDA for all the tools and knowledge. Cuboosh, Sirooga, Packetmangler, Tdusen, Drbowden, IDJ and everyone from my 3.02 thread for helping me work out the bugs. Without further ado:
3.53.DK.02 Based on CE OS 5.2.19213 (provided by incognitho)
Storage: 164.66MB Total, about 3MB In Use, about 162MB Free
Program: 85.32MB Total, about 31MB In Use (after soft reset), about 54MB Free
3.53.DK.01 Based on CE OS 5.2.19213 (provided by incognitho)
Storage: 165.79MB Total, about 3MB In Use, about 162MB Free
Program: 85.32MB Total, about 31MB In Use (after soft reset), about 54MB Free
3.51.DK.01 Based on CE OS 5.2.19209 (provided by incognitho)
Storage: 165.29MB Total, about 3MB In Use, about 162MB Free
Program: 85.32MB Total, about 31MB In Use (after soft reset), about 54MB Free
This rom starts where my older roms left off as far as "stripped down-ness" . My roms have AT&T connnection settings by default so no need to install and run HTC Connection Setup if you are an AT&T customer. Keyboard is Tilt layout so install KaiserKeyboard.cab attached below to change to Kaiser layout. Now onto the deets:
3.53.DK.02
- All Tweaks removed (cab included in rar)
- Removed Comm Manager (cab included in rar)
- Put back SIM Manager
- Clear Storage runs after flashing (no need to hard reset, but I still recommend you do)
- Overall more refined (I started from scratch on this one to work out some bugs)
3.53.DK.01
- starts where 3.51.DK.01 left off, nearly identical
- custsat.dll replace with no2chem's dummy file
- AUTD in CommManager replaced with 3G Toggle, cab also available below
3.51.DK.01 (4/24, radio not included)
- starts where 3.02.DK.05 left off
- removed help files from OEM_Lang_0409
- removed bmp's associated with help files
- removed DRM from OEM_Lang_0409 and SYS
- removed several dll's that are a part of Audio Manager and Streaming Player
- replaced NetCF 3.5 and SqlCe 3.5 with NetCF 2.0 and SqlCe 3.0 (for compatibility)
Stuff I noticed in 3.51:
- Addition of disptools.dll in OEMDrivers with new registry settings to go with it! I have no idea what this does and I'd love it if someone could enlighten me.
- AutoShortcut.exe and a shortcut to it that gets place in StartUp. Don't know what this does either.
- HTCCpl.cpl changed to MyCpl.cpl and mxip_HtcApps_translation.provxml reflects those changes. These cpl's control some items under "Settings".
- New bluetooth registry settings! not sure if this is related, but the blue light no longer turns on when you reset.
- What happened to the Program memory? 85.32 down from the usual 101.32.
Issues:
- Microsoft Voice Command versions older than 1.6.19209 will cause lockups.
- Typing area does not show with IM+.
- No video when using CorePlayer in QTv mode.
- I don't use TCPMP, but I'm guessing this still does not work either.
- Using cleartype in landscape mode causes text to disappear.
3.53.DK.02 Download Linkage:
http://rapidshare.com/files/117111999/3.53.DK.02___CABS.rar.html
see here for ringtone size limit fix http://forum.xda-developers.com/showpost.php?p=2227911&postcount=58
3.53.DK.01 Download Linkage:
http://rapidshare.com/files/114733628/3.53.DK.01.rar.html
http://www.4shared.com/file/47558388/89ca384e/KAISIMG_353DK01.html - mirror provided by sirooga
3.53 ROM Base (for cooking, download both parts):
http://rapidshare.com/files/115118417/3.53.DK.01-OEM-ROM.rar.html
http://rapidshare.com/files/115115367/3.53.DK.01-SYS.rar.html
3.51.DK.01 Download Linkage:
http://www.filesend.net/download.php?f=f7a49564aea29389db9d30afa52f22ee
http://www.megaupload.com/?d=5UH62WA2
http://rapidshare.com/files/110092950/3.51.DK.01.rar.html
3.51 ROM Base (for cooking, download both parts):
http://rapidshare.com/files/112782518/3.51.DK.01-OEM-ROM.rar.html
http://rapidshare.com/files/112779560/3.51.DK.01-SYS.rar.html
Radio Thread (1.65.20.29, Thanks to P1Tater):
http://forum.xda-developers.com/showthread.php?t=391714
Radio Linkage (1.65.14.06):
http://www.filesend.net/download.php?f=3ddce0d0b38d500a2108715d20a01677
http://www.megaupload.com/?d=SM6CWVNB
http://rapidshare.com/files/110097140/KAIS_Radio_Only_1.65.14.06_CustomRUU.rar.html
DO NOT INSTALL RADIO 1.65.17.10 IF YOU WANT TO DOWNGRADE IT LATER, I'M NOT EVEN GOING TO PROVIDE A LINK FOR IT, Thanks ATW !
I've started to mod my cabs to install to their own folders under \Program Files instead of \Windows whenever possible to keep the directory as clean as possible. 3.51 has 814 objects in \Windows after flash and opens wicked fast through File Explorer. Voice Command still seems to be in the grey area for posting so PM me for the my new 19209 version that installs to \Program Files\Voice Command. Help files are removed from my new cabs. Cabs attached below with more to come.
Update: There were some issues with 3 of my cabs and I just removed them from my first post. I will re-up them to my second post once I fix. I need to apologize to the 23 members that downloaded HTCQuickGPS 1_00_220821_00, the 17 members that downloaded MSInternetSharing 6.0 and the 15 members that downloaded MSRemoteDesktopMobile 6.1.
click me if you wanna give a me a little somethin'
4/24 - Fixed QuickGPS and InternetSharing cabs attached.
5/13 - Added ArcsoftMMSComposer 5_0_31_19.cab
Great, time to flash again...
Hung on the Windows Mobile 6.1 screen right after the flash. Had to hard reset to get past that point.
Loading up my apps now to see how it works.
akadonny said:
- I don't use TCPMP, but I'm guessing this still does not work either.
Click to expand...
Click to collapse
People might check THIS link to get TCPMP working on your ROM.
Have to admit that I haven't tried it with your ROM. There are at least 3 new ROM's available from the last two days. So I have to check out a lot
Great work btw on your new release! Keep it up!
akadonny, Did you make the APN/RIL changes on this AT&T build for us BBC users?
GSLEON3 said:
akadonny, Did you make the APN/RIL changes on this AT&T build for us BBC users?
Click to expand...
Click to collapse
No. Didn't have any requests for this so never thought to include it. Give me a few minutes and I'll make one for ya.
Edit: I just took a look at your instructions for "Multiple Data Sessions". Was about to make a new rom when I checked my registry. If the only change that needs to be made is:
<parm name="AGPSNVSetting" datatype="integer" value="5" />
then my rom is good to go for BBC. Happy flashing!
I just reflashed to the 3.02 because this one kept locking up on me. I don't me SOD either, I mean total lockup with the backlight on full brightness for 5-6 minutes...
I might try the multi connection ROM shortly.
idj1975 said:
I just reflashed to the 3.02 because this one kept locking up on me. I don't me SOD either, I mean total lockup with the backlight on full brightness for 5-6 minutes...
I might try the multi connection ROM shortly.
Click to expand...
Click to collapse
Did you install Voice Command? Using any version other than 1.6.19209 will cause your phone to lockup. Took me a while to figure this out, but found it installing 1 proggy at a time. Also, radio 1.65.14.06 is required.
akadonny said:
Did you install Voice Command? Using any version other than 1.6.19209 will cause your phone to lockup. Took me a while to figure this out, but found it installing 1 proggy at a time. Also, radio 1.65.14.06 is required.
Click to expand...
Click to collapse
no voice command, had the radio from your first post installed too...
*however* i didn't flash the radio first... i just realized that. i'll flash the radio & then flash the rom to see if it gets any better.
idj1975 said:
no voice command, had the radio from your first post installed too...
*however* i didn't flash the radio first... i just realized that. i'll flash the radio & then flash the rom to see if it gets any better.
Click to expand...
Click to collapse
I didn't know the order of flashing mattered? I flash my phone so much while testing my rom before release that I lose track of these things. I do however always do a master reset after each flash.
Anyways, let me know how it goes. I've been using this rom since yesterday without any issues.
akadonny said:
I didn't know the order of flashing mattered? I flash my phone so much while testing my rom before release that I lose track of these things. I do however always do a master reset after each flash.
Anyways, let me know how it goes. I've been using this rom since yesterday without any issues.
Click to expand...
Click to collapse
i think it might since it hung during startup before i put the radio on.
reflashed the radio & then the rom a little while ago. loading up my apps to see if i get locks again
Right, well I found out what's killing it.
BB Connect seems to be making it die, which makes me wonder if it's the data connection or BB Connect...
EDIT: Loaded Alex's "clean" ROM & it doesn't seem to have the same issue.
EDIT2: Can't get BBC to connect on Alex's ROM, so 3.02 it is for a while longer...
landscape mode - issue with text
akadonny,
Loaded this new ROM on my AT&T Tilt and notice a weird issue (didn't have this with the previous version). In regular mode typing text via the onscreen keyboard is visible. When I switch to landscape mode all text that can be typed disappear or it doesn't appear until you go to a new line. I noticed this when I went to enter my Personal Information.
Otherwise it's working fine for what I use on the device so far.
akadonny said:
DO NOT INSTALL RADIO 1.65.17.10 IF YOU WANT TO DOWNGRADE IT LATER, I'M NOT EVEN GOING TO PROVIDE A LINK FOR IT, Thanks ATW !
Click to expand...
Click to collapse
Hopefully there will be a fix for this soon. If not I will have to revert to plan B.
Mirrors
3.51.DK.01 Mirror
1.65.14.06 Mirror
idj1975 said:
Right, well I found out what's killing it.
BB Connect seems to be making it die, which makes me wonder if it's the data connection or BB Connect...
Click to expand...
Click to collapse
Sorry about that idj. I don't use BBC so I can't really test this for ya.
ecltech said:
Loaded this new ROM on my AT&T Tilt and notice a weird issue (didn't have this with the previous version). In regular mode typing text via the onscreen keyboard is visible. When I switch to landscape mode all text that can be typed disappear or it doesn't appear until you go to a new line. I noticed this when I went to enter my Personal Information.
Click to expand...
Click to collapse
I didn't understand you at first, but I think this may be by design. Just to be clear you are saying that you type using the on screen keyboard entering your Owner Information and when you switch to landscape the on screen keyboard closes until you tap the screen again. Is this right? I tested this and the on screen keyoard seems close under any app where you can type when you switch to landscape. I think I do remember the on screen keyboard staying open in landscape before.
AllTheWay said:
Hopefully there will be a fix for this soon. If not I will have to revert to plan B.
Click to expand...
Click to collapse
ATW, there are a lot of Kaiser/Tilt users out there including myself that owes you many thanks for catching this early.
sirooga said:
3.51.DK.01 Mirror
1.65.14.06 Mirror
Click to expand...
Click to collapse
woohoo! more mirrors!
Thanks much, Sirooga
Ok. So I loaded up the straight bloatware ROM & don't have any of the issues with an immediate lockup when BBC is installed.
Maybe when something was taken out it broke something else in another way that wasn't visible?
At least the ROM is decently speedy for a full on vendor one.
thanks for another release akadonny!
Seems to be running well. Does this have a differently sized pagefile?
Thanks,
PM
idj1975 said:
Ok. So I loaded up the straight bloatware ROM & don't have any of the issues with an immediate lockup when BBC is installed.
Maybe when something was taken out it broke something else in another way that wasn't visible?
At least the ROM is decently speedy for a full on vendor one.
Click to expand...
Click to collapse
At what point does it lock up? Installed the software to my Tilt, ran through the initial setup, soft reset when it told me to and now I have a blackberry tray icon. I click on the tray icon and I have several tabs. I've attached a few screenshots. The cab I used to install it is to big to attach, but I downloaded it from here.
packetmangler said:
thanks for another release akadonny!
Seems to be running well. Does this have a differently sized pagefile?
Thanks,
PM
Click to expand...
Click to collapse
I didn't change the pagepool on this one, but it looks like the 3.51 default it 28MB as opposed to the usual 12MB.
ROM DEVELOPMENT CLOSED/ I NO LONGER COOK FOR THE HTC KAISER/ TREAD DEAD
So here it is guys, after much brain storming as to rather to release or not my Rom i finally decided to do so. Bare in mind this Rom i never though of releasing as its my own personal Rom with my Own taste, that being said this is somewhat rough and very unprofessional and most stuff is in the start menu. The Rom is called Unholly because that's the name i use on forums now a days, siulmagic is a very old one that unfortunately i cant change here
The Reason i released the Rom is that i never got the D3D drivers to work with any Rom(no offense to other Cookers), so i Decided to cook my own
PS; i can recook rom with 101 RAM and upload if enough request are made, but its mostly unstable, do to it not having the MEMFIX
now to the good Stuff
BTW if you want more Free memory you can disable manila 2d it gives you like 49-50mb free of memory, and if you want little bit more delete poutlook.ink and sddaemon.ink from startup folder in windows folder( that kind of rimes)
What's included:
Task Manager
[WM6.5] HTC 2DManila 2.0.19191432.04.WAlien.cab
At0mAng Enhanced D3D Driver
HTC-CA-Kaiser-Drivers
SJ SamsungOmnia_Driver_D3D
DragonWorld TopBar Icons Rev3
Youtube app
Games that work 100% out of the box
Call of Duty 2
Quake 3 CE
Xtract
Whats Removed:
Alot of stuff that i cant remember right now, remember this a stock like rom(if you cant find something then that means it's been removed sry)
Bugs: Download Camera Fix Below
Camera is almost useless you can take a shot but it wont save the photo, it seems the oemdrives i use to make D3D Drivers work render camera useless, so yea i cant fix that way beyond my knowledge,if i ever find a fix or if any of you do, pm me and il update the rom
Also the task bar thats supposed to come up when you touch the upper right corner is bugged(its a build related bug i cannot fix that)so yea you have to access the com manager from start menu, also because of that there no way that i know of to tweak the volume so im gona link a very simple app to do so
Thanks to:
Da_G for providing us with every rom
OndraSter for hes amazing kitchen with out it this rom would not have been posible
drkfngthdragnlrd for letting me use hes top bar icons
jjblaster3 for telling me how to make the D3D drivers work on WM6.5
and who ever i forgot to mention XD
Special thanks to:
My Brother RaffyVitto without him i would have never gotten interested in Wm phones
Screen Shoots:
Download Link
http://www.zshare.net/download/6683936049882852/
Volume App
http://handheld.softpedia.com/get/Audio/Volume-Control-35536.shtml
Camera fix
http://www.mediafire.com/download.php?gbnuw2mnmz2 (big Props to team T.i.R. for Camera Fix, you guys are the best)
"Double Comm Manager icons in start menu(also do not know hot to fix sry)"
Check your app.dat files (plus initflashfiles.dat in oem\oem_lang_0409 plus initflashfiles.txt in camera folder if you have it in OEM instead of EXT). If they move Camera.lnk into \Windows\Start Menu\Programs, delete the line
"Camera auto starts on first boot(dunno y and dont know how to fix it XD)"
Do the same again, but check for folder \Windows\StartUp. If it isn't there, check for HKEY_LOCAL_MACHINE\init whether there isn't anything about camera.lnk (LaunchXXX "Camera.lnk") and if yes, again, search for it in rgu and provxml files.
Happy to see new chef. Congrats on first release
OndraSter said:
"Double Comm Manager icons in start menu(also do not know hot to fix sry)"
Check your app.dat files (plus initflashfiles.dat in oem\oem_lang_0409 plus initflashfiles.txt in camera folder if you have it in OEM instead of EXT). If they move Camera.lnk into \Windows\Start Menu\Programs, delete the line
"Camera auto starts on first boot(dunno y and dont know how to fix it XD)"
Do the same again, but check for folder \Windows\StartUp. If it isn't there, check for HKEY_LOCAL_MACHINE\init whether there isn't anything about camera.lnk (LaunchXXX "Camera.lnk") and if yes, again, search for it in rgu and provxml files.
Happy to see new chef. Congrats on first release
Click to expand...
Click to collapse
Thx for the reply, were exacly is the app.dat files? i francly dont know were they are, also the initflashfiles.dat i also dont know were that files is so if you can gide me to it id be more than happy. also were would i go to check my kitchen registrys
welcome new cheef !
btw - athenOS has 101mb ram and d3d already. so - we wait new rom`s from you.
obaz said:
welcome new cheef !
btw - athenOS has 101mb ram and d3d already. so - we wait new rom`s from you.
Click to expand...
Click to collapse
im shure he does but game's dont run accelerated as he probly uses the MEMFIX, witch render D3D driver useless
interesting!!!
nice to see someone addressing the latent potential for gaming in the kaiser!!!
i'd try out the ROM for myself but don't have the time currently...
i'm curious to know, what kind of framerate do you get in q3 on this ROM ? i'm a HUGE quake 3 fan (and an excellent 1-on-1 player and ctf flag snatcher too ), notice my custom q3a theme/lock screen in my signature below
anyway, i hope you can iron out the kinks in the ROM so that it can be made good for regular use also...and do let me know some fps numbers for q3 on the ROM!
cheers!
app.dat in all EXT folders, initflashfiles.dat in OEM\OEM_Lang_0409 and if you have Camera in OEM instead of EXT, search in OEM\<camera folder name>\initflashfiles.txt
I was looking for a rom just like this. Siulmagic, if you can fix those minor problems, I'd switch to this rom.
Too many roms come with 101 ram hack, that makes 3D acceleration useless.
Great release bro ehehehe, im guilty of charge , i created an awsome chef LOL.
hey guys sorry for not replying sooner aion has got me playing like a friken crack head XD,about the rom il try to fix some of the bugs in it, but i cant promise anything il try and start fixing them tomorrow thats if im not still playing aion, goh what a time for me to start playing an mmorpg
btw: im glad i got some ppl interested in it heh never expected that
D3D drivers wont work good cooked in, if you have memory hack. But if you install it after, then it should work just fine. At least thats what Anryl used to say!
I tried to install drivers after I flash a 101MB ROM, and it doesn't work at all. The only WM6.5 rom that would work is T.i.R. v16 K, but it's using a relatively old WM6.5.
I've tried to run GLbenchmark, and it won't work unless you don't have 101MB. To even complete the benchmark, you need to replace the DLL "ahi2dati.dll" with a renamed copy of "ahi2dati_dm.dll".
Also worth to note that by installing 3D drivers, you can't run Opera Mobile 9.7. Though, I don't see this as a problem right now, since Skyfire is much better anyway.
ai6908 said:
D3D drivers wont work good cooked in, if you have memory hack. But if you install it after, then it should work just fine. At least thats what Anryl used to say!
Click to expand...
Click to collapse
thats what i used to belive, but then i said meh what the heck il cook em in and see how it goes, and you guessed it they work exacly as i would have installed them manually.
btw about the rom still ironing out the bugs, i just cant seem to know how to fix the damn camera button not launching the camera like its supposed too
To Ondraster:
i think i managed to fix the double com manager icon(need to flash rom to verify)
about the camera startup bug, i search in my \OEM\OEM_Lang_0409 directory and theres no initflashfiles.dat file there so i dunno whats wrong, tho what i would really like to fix is the camera button to launch the camera instead of the album(or i think it does , because it dosent even open it just says it in the task bar, it likes opens for a few seconds then closes)
siulmagic said:
thats what i used to belive, but then i said meh what the heck il cook em in and see how it goes, and you guessed it they work exacly as i would have installed them manually.
btw about the rom still ironing out the bugs, i just cant seem to know how to fix the damn camera button not launching the camera like its supposed too
To Ondraster:
i think i managed to fix the double com manager icon(need to flash rom to verify)
about the camera startup bug, i search in my \OEM\OEM_Lang_0409 directory and theres no initflashfiles.dat file there so i dunno whats wrong, tho what i would really like to fix is the camera button to launch the camera instead of the album(or i think it does , because it dosent even open it just says it in the task bar, it likes opens for a few seconds then closes)
Click to expand...
Click to collapse
Congrats on release
Have you tryed in Settings\Buttons to map it? and see if opens up Camera.
If does the REG to set buttons is:
HKLM\Software\Microsoft\Shell\Keys
stylez said:
Congrats on release
Have you tryed in Settings\Buttons to map it? and see if opens up Camera.
If does the REG to set buttons is:
HKLM\Software\Microsoft\Shell\Keys
Click to expand...
Click to collapse
thats the problem is that the camera is mapped to the correct button, but when i push the camera button all it does it open pictures a videos for a brief moment and then closes, i am going to try that reg key if it works il add it as a fix i guess
There has to be an initflashfile, do you have show hidden files and stuff in the pc? If you dont, then you wont see initflashfiles.
Also run camera.exe from windows folder and see if camera opens. If it does, then then you camera.lnk file got messed up.
ai6908 said:
There has to be an initflashfile, do you have show hidden files and stuff in the pc? If you dont, then you wont see initflashfiles.
Also run camera.exe from windows folder and see if camera opens. If it does, then then you camera.lnk file got messed up.
Click to expand...
Click to collapse
thats exacly what it does it only open from the shhortcut in start menu or form windows folder, and yea il check if i got hidden files off but i doubt it(maybe im wrong win7 turn it back on)
Hey siulmagic, any progress on your rom?
sorry about the late reply but just today i took a break from aion, so i decided to tackel some of the bugs from my rom and i managed to fix the camera button bug, the only bug that remains is the one were it takes like a minute to save photos you take with camera(i have no idea y that happens) so yea as soons as i figure how to fix it or if anyone know's how to fix it do tell, untill then i cant release the rom, but stay tunned for future releases =)
ok guys the next rom release is coming nicely iv ported xip 23060 so now the rom is up to date, but still the camera bug is there until i can fix that no release sry, so stay tuned guys wish me luck