3.53.DK.02, UC 2.0 Compliant, Supa-Clean [5/23/2008] - Tilt, TyTN II, MDA Vario III Windows Mobile ROM De

Hello XDA! Let's start off with a few thanks. Pof, Jscepi, Kyphur, Bepe, XDA for all the tools and knowledge. Cuboosh, Sirooga, Packetmangler, Tdusen, Drbowden, IDJ and everyone from my 3.02 thread for helping me work out the bugs. Without further ado:
3.53.DK.02 Based on CE OS 5.2.19213 (provided by incognitho)
Storage: 164.66MB Total, about 3MB In Use, about 162MB Free
Program: 85.32MB Total, about 31MB In Use (after soft reset), about 54MB Free
3.53.DK.01 Based on CE OS 5.2.19213 (provided by incognitho)
Storage: 165.79MB Total, about 3MB In Use, about 162MB Free
Program: 85.32MB Total, about 31MB In Use (after soft reset), about 54MB Free
3.51.DK.01 Based on CE OS 5.2.19209 (provided by incognitho)
Storage: 165.29MB Total, about 3MB In Use, about 162MB Free
Program: 85.32MB Total, about 31MB In Use (after soft reset), about 54MB Free
This rom starts where my older roms left off as far as "stripped down-ness" . My roms have AT&T connnection settings by default so no need to install and run HTC Connection Setup if you are an AT&T customer. Keyboard is Tilt layout so install KaiserKeyboard.cab attached below to change to Kaiser layout. Now onto the deets:
3.53.DK.02
- All Tweaks removed (cab included in rar)
- Removed Comm Manager (cab included in rar)
- Put back SIM Manager
- Clear Storage runs after flashing (no need to hard reset, but I still recommend you do)
- Overall more refined (I started from scratch on this one to work out some bugs)
3.53.DK.01
- starts where 3.51.DK.01 left off, nearly identical
- custsat.dll replace with no2chem's dummy file
- AUTD in CommManager replaced with 3G Toggle, cab also available below
3.51.DK.01 (4/24, radio not included)
- starts where 3.02.DK.05 left off
- removed help files from OEM_Lang_0409
- removed bmp's associated with help files
- removed DRM from OEM_Lang_0409 and SYS
- removed several dll's that are a part of Audio Manager and Streaming Player
- replaced NetCF 3.5 and SqlCe 3.5 with NetCF 2.0 and SqlCe 3.0 (for compatibility)
Stuff I noticed in 3.51:
- Addition of disptools.dll in OEMDrivers with new registry settings to go with it! I have no idea what this does and I'd love it if someone could enlighten me.
- AutoShortcut.exe and a shortcut to it that gets place in StartUp. Don't know what this does either.
- HTCCpl.cpl changed to MyCpl.cpl and mxip_HtcApps_translation.provxml reflects those changes. These cpl's control some items under "Settings".
- New bluetooth registry settings! not sure if this is related, but the blue light no longer turns on when you reset.
- What happened to the Program memory? 85.32 down from the usual 101.32.
Issues:
- Microsoft Voice Command versions older than 1.6.19209 will cause lockups.
- Typing area does not show with IM+.
- No video when using CorePlayer in QTv mode.
- I don't use TCPMP, but I'm guessing this still does not work either.
- Using cleartype in landscape mode causes text to disappear.
3.53.DK.02 Download Linkage:
http://rapidshare.com/files/117111999/3.53.DK.02___CABS.rar.html
see here for ringtone size limit fix http://forum.xda-developers.com/showpost.php?p=2227911&postcount=58
3.53.DK.01 Download Linkage:
http://rapidshare.com/files/114733628/3.53.DK.01.rar.html
http://www.4shared.com/file/47558388/89ca384e/KAISIMG_353DK01.html - mirror provided by sirooga
3.53 ROM Base (for cooking, download both parts):
http://rapidshare.com/files/115118417/3.53.DK.01-OEM-ROM.rar.html
http://rapidshare.com/files/115115367/3.53.DK.01-SYS.rar.html
3.51.DK.01 Download Linkage:
http://www.filesend.net/download.php?f=f7a49564aea29389db9d30afa52f22ee
http://www.megaupload.com/?d=5UH62WA2
http://rapidshare.com/files/110092950/3.51.DK.01.rar.html
3.51 ROM Base (for cooking, download both parts):
http://rapidshare.com/files/112782518/3.51.DK.01-OEM-ROM.rar.html
http://rapidshare.com/files/112779560/3.51.DK.01-SYS.rar.html
Radio Thread (1.65.20.29, Thanks to P1Tater):
http://forum.xda-developers.com/showthread.php?t=391714
Radio Linkage (1.65.14.06):
http://www.filesend.net/download.php?f=3ddce0d0b38d500a2108715d20a01677
http://www.megaupload.com/?d=SM6CWVNB
http://rapidshare.com/files/110097140/KAIS_Radio_Only_1.65.14.06_CustomRUU.rar.html
DO NOT INSTALL RADIO 1.65.17.10 IF YOU WANT TO DOWNGRADE IT LATER, I'M NOT EVEN GOING TO PROVIDE A LINK FOR IT, Thanks ATW !
I've started to mod my cabs to install to their own folders under \Program Files instead of \Windows whenever possible to keep the directory as clean as possible. 3.51 has 814 objects in \Windows after flash and opens wicked fast through File Explorer. Voice Command still seems to be in the grey area for posting so PM me for the my new 19209 version that installs to \Program Files\Voice Command. Help files are removed from my new cabs. Cabs attached below with more to come.
Update: There were some issues with 3 of my cabs and I just removed them from my first post. I will re-up them to my second post once I fix. I need to apologize to the 23 members that downloaded HTCQuickGPS 1_00_220821_00, the 17 members that downloaded MSInternetSharing 6.0 and the 15 members that downloaded MSRemoteDesktopMobile 6.1.
click me if you wanna give a me a little somethin'

4/24 - Fixed QuickGPS and InternetSharing cabs attached.
5/13 - Added ArcsoftMMSComposer 5_0_31_19.cab

Great, time to flash again...

Hung on the Windows Mobile 6.1 screen right after the flash. Had to hard reset to get past that point.
Loading up my apps now to see how it works.

akadonny said:
- I don't use TCPMP, but I'm guessing this still does not work either.
Click to expand...
Click to collapse
People might check THIS link to get TCPMP working on your ROM.
Have to admit that I haven't tried it with your ROM. There are at least 3 new ROM's available from the last two days. So I have to check out a lot
Great work btw on your new release! Keep it up!

akadonny, Did you make the APN/RIL changes on this AT&T build for us BBC users?

GSLEON3 said:
akadonny, Did you make the APN/RIL changes on this AT&T build for us BBC users?
Click to expand...
Click to collapse
No. Didn't have any requests for this so never thought to include it. Give me a few minutes and I'll make one for ya.
Edit: I just took a look at your instructions for "Multiple Data Sessions". Was about to make a new rom when I checked my registry. If the only change that needs to be made is:
<parm name="AGPSNVSetting" datatype="integer" value="5" />
then my rom is good to go for BBC. Happy flashing!

I just reflashed to the 3.02 because this one kept locking up on me. I don't me SOD either, I mean total lockup with the backlight on full brightness for 5-6 minutes...
I might try the multi connection ROM shortly.

idj1975 said:
I just reflashed to the 3.02 because this one kept locking up on me. I don't me SOD either, I mean total lockup with the backlight on full brightness for 5-6 minutes...
I might try the multi connection ROM shortly.
Click to expand...
Click to collapse
Did you install Voice Command? Using any version other than 1.6.19209 will cause your phone to lockup. Took me a while to figure this out, but found it installing 1 proggy at a time. Also, radio 1.65.14.06 is required.

akadonny said:
Did you install Voice Command? Using any version other than 1.6.19209 will cause your phone to lockup. Took me a while to figure this out, but found it installing 1 proggy at a time. Also, radio 1.65.14.06 is required.
Click to expand...
Click to collapse
no voice command, had the radio from your first post installed too...
*however* i didn't flash the radio first... i just realized that. i'll flash the radio & then flash the rom to see if it gets any better.

idj1975 said:
no voice command, had the radio from your first post installed too...
*however* i didn't flash the radio first... i just realized that. i'll flash the radio & then flash the rom to see if it gets any better.
Click to expand...
Click to collapse
I didn't know the order of flashing mattered? I flash my phone so much while testing my rom before release that I lose track of these things. I do however always do a master reset after each flash.
Anyways, let me know how it goes. I've been using this rom since yesterday without any issues.

akadonny said:
I didn't know the order of flashing mattered? I flash my phone so much while testing my rom before release that I lose track of these things. I do however always do a master reset after each flash.
Anyways, let me know how it goes. I've been using this rom since yesterday without any issues.
Click to expand...
Click to collapse
i think it might since it hung during startup before i put the radio on.
reflashed the radio & then the rom a little while ago. loading up my apps to see if i get locks again

Right, well I found out what's killing it.
BB Connect seems to be making it die, which makes me wonder if it's the data connection or BB Connect...
EDIT: Loaded Alex's "clean" ROM & it doesn't seem to have the same issue.
EDIT2: Can't get BBC to connect on Alex's ROM, so 3.02 it is for a while longer...

landscape mode - issue with text
akadonny,
Loaded this new ROM on my AT&T Tilt and notice a weird issue (didn't have this with the previous version). In regular mode typing text via the onscreen keyboard is visible. When I switch to landscape mode all text that can be typed disappear or it doesn't appear until you go to a new line. I noticed this when I went to enter my Personal Information.
Otherwise it's working fine for what I use on the device so far.

akadonny said:
DO NOT INSTALL RADIO 1.65.17.10 IF YOU WANT TO DOWNGRADE IT LATER, I'M NOT EVEN GOING TO PROVIDE A LINK FOR IT, Thanks ATW !
Click to expand...
Click to collapse
Hopefully there will be a fix for this soon. If not I will have to revert to plan B.

Mirrors
3.51.DK.01 Mirror
1.65.14.06 Mirror

idj1975 said:
Right, well I found out what's killing it.
BB Connect seems to be making it die, which makes me wonder if it's the data connection or BB Connect...
Click to expand...
Click to collapse
Sorry about that idj. I don't use BBC so I can't really test this for ya.
ecltech said:
Loaded this new ROM on my AT&T Tilt and notice a weird issue (didn't have this with the previous version). In regular mode typing text via the onscreen keyboard is visible. When I switch to landscape mode all text that can be typed disappear or it doesn't appear until you go to a new line. I noticed this when I went to enter my Personal Information.
Click to expand...
Click to collapse
I didn't understand you at first, but I think this may be by design. Just to be clear you are saying that you type using the on screen keyboard entering your Owner Information and when you switch to landscape the on screen keyboard closes until you tap the screen again. Is this right? I tested this and the on screen keyoard seems close under any app where you can type when you switch to landscape. I think I do remember the on screen keyboard staying open in landscape before.
AllTheWay said:
Hopefully there will be a fix for this soon. If not I will have to revert to plan B.
Click to expand...
Click to collapse
ATW, there are a lot of Kaiser/Tilt users out there including myself that owes you many thanks for catching this early.
sirooga said:
3.51.DK.01 Mirror
1.65.14.06 Mirror
Click to expand...
Click to collapse
woohoo! more mirrors!
Thanks much, Sirooga

Ok. So I loaded up the straight bloatware ROM & don't have any of the issues with an immediate lockup when BBC is installed.
Maybe when something was taken out it broke something else in another way that wasn't visible?
At least the ROM is decently speedy for a full on vendor one.

thanks for another release akadonny!
Seems to be running well. Does this have a differently sized pagefile?
Thanks,
PM

idj1975 said:
Ok. So I loaded up the straight bloatware ROM & don't have any of the issues with an immediate lockup when BBC is installed.
Maybe when something was taken out it broke something else in another way that wasn't visible?
At least the ROM is decently speedy for a full on vendor one.
Click to expand...
Click to collapse
At what point does it lock up? Installed the software to my Tilt, ran through the initial setup, soft reset when it told me to and now I have a blackberry tray icon. I click on the tray icon and I have several tabs. I've attached a few screenshots. The cab I used to install it is to big to attach, but I downloaded it from here.
packetmangler said:
thanks for another release akadonny!
Seems to be running well. Does this have a differently sized pagefile?
Thanks,
PM
Click to expand...
Click to collapse
I didn't change the pagepool on this one, but it looks like the 3.51 default it 28MB as opposed to the usual 12MB.

Related

Midget v0.1 Vanilla Crossbow Rom (Based on Helmi's Unreleased Rom)

Unknown to me, the 'clean' source i was given to make this ROM was actually heavily customized already to fix some major bugs and flaws by Helmi_C. He deserves the main credit for this ROM, but i will continue to keep it up to date - no hard feelings?
Hi, as you may know I've been here (xda-developers) for quite a while, In this time i have been learning the art form that is rom building, my teachers (at least i think of it like that include maimach (How can he be human?), Tuatara (God of all things WM5 on BA), Lt.Cmdr.Ivan, Helmi_c and many others (thanks everyone, sorry if i didnt mention you)
Finally in December 2006 i had a chance to use this knowledge i have gathered when i acquired a pre-release version of WM6 from a good friend (you know who you are ) Since then i've spent days tweaking and fixing bugs in this rom, i wanted to wait until it was perfect to release, but due to recent event s i think now would be the best time, so i present you with My first ROM for Universal and my First Crossbow rom...
Current State of things:
Bugs:
Video Calling doesn't work (im working on this - thanks bepe)
In REALvga mode (addon cab) if you have owner information or password set to display on boot then you will hang your device, hard reset needed. im stuck as to what is causing this, anyone got any ideas?
Occasionally after flashing the phone will reset into bootloader - not load OS. a quick "set 14 0" in mtty fixes this (again anyone got any ideas?)
Features:
Version 5.2.318 (Build 15341.0.0.0)
Most Stable Crossbow rom for universal (verified by two beta testers who have tried them all)
Free Storage 40mb
Free RAM 30mb
Cache Tweaks for Performance
New Comm Manager hacked for speed and look (WM6 Background)
No Bloat
Coming soon:
Video Call Drivers
AKU 0.1
Well i've rambled on too long here ill give you the links
Rapidshare.com:
http://rapidshare.com/files/12143324/midget_1990_v0_1_vanilla_wm6.rar.html
Addons:
REALvga mode (Read the bug above first!):
ftp://xda:[email protected]/Uploads/Universal/midget_1990/midget_1990_realvga_wm6.cab
Tweaks and hacks:
Includes: Oxios Close apps (great tool) and map to backlight button. (ability to change backlight button also)
A collection of IE tweaks for faster and more stable surfing
Enable b/g wifi mode
Set keyboard and audio priority to better values
Enable cleartype for both modes
Change cache sizes for faster device
ftp://xda:[email protected]/Uploads/Universal/midget_1990/midget_1990_tweaks_and_hacks.cab
BRAVO mate BRAVO
my 1st universal Rom upgrade and I am really happy with this one
Mainly because of the
MASSIVE 30 mb RAm
Cheers
anyone tried tomtom with it?
i wana try this tonight but cant find my god damn usb lead!
Tom Tom works great (both vga modes)
hello there midget... I thought u said that u hv 40mb ram?? U make me busy with ur statement there my friend...lol...
so basicly its a modify to vanila version and added vga functionality? well, if u dont mine send me ur default.hv let me see what difference that u make my friend...
I found one more problem. I tried to use oZVGA mode in this release and most of the icons disappeared. The taskbar became blank.. i couldnt see the start button. oZVGA doesnt work with this release of crossbow it seems.
Please try to fix that Midget.
Thanks Awesome release.
Thanx Midget
helmi_c said:
hello there midget... I thought u said that u have 40mb ram?? U make me busy with your statement there my friend...lol...
so basically its a modify to vanila version and added vga functionality? well, if u don't mine send me your default.hv let me see what difference that u make my friend...
Click to expand...
Click to collapse
I said 40?! that would be nice lol, must have been a typo
bear in mind that some of the tweaks are separate in the cab file i linked to.
try the comm manager too, its MUCH faster
nuclear said:
I found one more problem. I tried to use oZVGA mode in this release and most of the icons disappeared. The taskbar became blank.. i couldnt see the start button. oZVGA doesnt work with this release of crossbow it seems.
Please try to fix that Midget.
Thanks Awesome release.
Click to expand...
Click to collapse
did you read what i wrote?
you need to install my vga mode cab (i wanted to save space so i dnt include it) this install the icons etc and ozvga
Midget_1990 said:
I said 40?! that would be nice lol, must have been a typo
bear in mind that some of the tweaks are separate in the cab file i linked to.
try the comm manager too, its MUCH faster
Click to expand...
Click to collapse
yes u did!...lol... and I do everything... I means everything... the maximum size I get its 31-32mb something... lol... btw congrat mate...
hacked CommManager?? with what? upx it?
helmi_c said:
yes u did!...lol... and I do everything... I means everything... the maximum size I get its 31-32mb something... lol... btw congrat mate...
hacked CommManager?? with what? upx it?
Click to expand...
Click to collapse
reshacker to change the interface (new background, the buttons are still in the making - each button has 5 part so it takes time) to make it fit in with wm6 and upx
Why do I only get 26 of free mem?
Extended Rom is seen as a drive and Outlook use it to store mail attachment (impossible to change the storage used) For other office program you can use SD CARD.
And it's impossible to hide Extended Rom
So I use an empty extended Rom
I'm having issues to flash this rom.
When I click "Upgrade" button, my uni reboot, and i can't upgrade it.
symbol no more works
poussin69: if im not mistaken i set extrom to install from /storage card/extrom (sorry i forgot to mention that) i've only recently got my uni so i though /storage for attachments was normal, ill look into changing it for you
Also what is symbol?
ZeD:
1) are you connected via a hub? this is bad.
2) try putting in bootloader mode first
3) did you included RUU.conf?
4) no idea sorry
you have a sym.txt file in windows directory so, when you type
a and use the "sym key" you will switch to à
e to é è ê .....
it was working with WM5
(I change the keyboard country to french as usual (azerty keyboard))
Midget_1990 said:
ZeD:
1) are you connected via a hub? this is bad.
2) try putting in bootloader mode first
3) did you included RUU.conf?
4) no idea sorry
Click to expand...
Click to collapse
I have tried to put into bootloader first, but I cant upgrade. I included the RUU.conf.
I'm not using a usb hub also.
Maybie a old bootloader version?
Ok, I got it.
Flashing the rom now.
After i get the version of the rom on the upgrader I put the device on bootloader and press "Upgrade".
poussin69 said:
you have a sym.txt file in windows directory so, when you type
a and use the "sym key" you will switch to à
e to é è ê .....
it was working with WM5
(I change the keyboard country to french as usual (azerty keyboard))
Click to expand...
Click to collapse
hmm, i didnt even knew that existed ill try to add it for the next release

faria-htc wizard...WWE WM6 ROM- [the real thing]

faria is back!
ftp://xda:[email protected]/Uploads/WIZARD/ROMS/untitled.JPG screenshots....
version [os] 5.2.318
Build aku 15341 aku.4.0.0.01 WWE
Ipl version ----
Spl version -----
Radio version recommended 2.19
Extended ROM version Faria v5
Htc logo Faria
Splash screen Faria
Page-pool- 6mb [original 12] 30mb free ram.
YOU MUST HAVE A BOOTLOADE VERSION 2XXX OR ABOVE...
ROM changes
Active sync fixed
Sofkey lag fixed
Voice command fixed
Windows live fixed
Added to the ROM;
Extended_rom added and fully working
Poket RAR
Windows live mail set to download double of the current size email.
Windows live/voice command –by default
BT SIM ACCESS PROFILE.
Camera 3.3 fully working
Media files support added plus new gif engine
New com manager -With option to turn IR on/of!!!
All wireless’ security profiles support added
HTC X [press and old to close activated]
Flash player 7
M&Msarc-soft 3.5.1.22.c
Java v11.1.7.1023
New Sim services app [stk]
Phone pad T9 [English ant Portuguese only] others dlls languages can be supplied upon request.
Sim card manager v 5.22
Replaced BT stereo profile with 3.3
Windows live search uk and US
Office mobile new layout
Registry mods;
4 ways navigation added
File explorer set to view all files
AD2P set to stereo
AD2P bit pool set to 60
Different gprs icon
Bypassed welcome screen [no more copy and paste]
Wireless today plug in and redirect app
Mms folder activated
Disabled Microsoft feedback
Time zones change page activated
Disabled ussd service
Disabled error reporting
Faria Clear type font
Cab set to not delete after install
Gprs bubble timer and disconnect button
Internet explorer Java support
Gprs workaround fix
Time zone page on and checked
GPS icon on
Clear type on, landscape and internet explorer
Obex on
GPS com port fix
One line time in today [not lvm]
Internet cache moved to storage card
Time in all pages
Wireless 54g support added
Wireless preload status on upon boot.
Removed from the ROM​
VOIP removed
DRM removed
SECURITY removed
Windows update removed
Scq removed
Windows catalogue removed
Bluetooth hdi removed [BT mouse/keyboard support]
Third party apps
BT sim card access profile
Adobe le reader
Startup manager
Battery status
Today agenda
Dotfred Contacts manager plug in
Dotfred Contact backup
File AS contact plug in
Total commander
Dotfred task-manager+registry editor
Phm tray icon
Sms backup
Omap clock
Smartkey [in program files]
Ringtone plug-in
New menu plug in [control panel]
Mobile secretary [control panel]
Windows live search
.ini files associated to notepad [now u can edit your Smartkey .ini in the pocket pc]
My documents plug in programs
My docs retriever plug in [in my documents]
Favorite’s shortcut [in my documents]
Time sync in control paned
Registry wizard in control paned
Extra Tray icons—the tray icons are managed by battery-status, got to options to enable/disable or add and remove them.
Bluetooth manager
Memory manager
Device lock
Reset app.
From the extended rom
Extras folder [my documents]
Dictionary manager, wififofum, spb to play, ppc vault, call recorder, smart key enable, and live search US
This cabs can be run from the folder called “extras” from my documents. Please note if you have a g4 that is unable to write to the extended rom this app will not be available
Xnview running from the extended rom
Know issues and recommendations;
No performance tweaks needed in my opinion
I recommend over clocking the rom [battery-status] to 247 MHz instead of applying performance tweaks ,performance tweaks take away ram…….were over clocking comes at very little loss of battery especially if you use the auto scale function.
THIS rom has no parts from any current wm6 rom,this is a real WWE wizard rom ,all the parts needed to make it as a full rom were sourced from my 3.3.
Battery status cannot be configured from today options control panel…….but you can configure it by pressing and holding the battery icon in battery-status today plug in.
the rom may be bit slower because i did not applied any performance tweaks....plus the rom is fully loaded so we cant compare to other roms.....i mean this roms has everything working.....its like comparing a loaded truck to an empty one..
the device may crash when it reboots for the first time at the welcome screen if you don't tap it straight away....just reset the device with the stylus and it will be fine. this is because there is apps loading in the background.
a vanilha version will be released soon.
many thanks to mamaich BEPE AND dr.P FOR ALL THE Support and all the authors/xda of the freware apps.... a specialy.....my wife that lend her wizard to me in order to finish this rom,and for putting up with the many hours i ignored her.....
download from here;http://dl.dropbox.com/u/7696581/htc%20wizard/Roms/CB-AIRAF-CB-AIRAF-the%20real%20thing.rar
and here are some fixes for the rom and request.
caps lock fix
extended-rom files for those who need it
windows live fix
speed dialer from 3.3 FILE MISSING, TRYING TO FIND A COPY.
16 languages for the phone pad [chose your and copy to windows]
Thanks!
Had put yesterday MBE... Gotta try this one now!
BTW,
THIS rom has no parts from any current wm6 rom,this is a real WWE wizard rom ,all the parts needed to make it as a full rom were sourced from my 3.3.
Click to expand...
Click to collapse
You mean it doesn't share modifications that were present in other WM6 roms, that yours comes from a clean WM6 and you added your own stuff?
Or that it's not a WM6 core...?
Got a bit lost reading, sorry.
Ka.
Downloading now...... Screw my own release.....
LOL faria and Molski are gods in my book.
new rom with many fix yeah
Tnx Faria..Going to download it... ;-)
Faria,
can i upgrade to this rom using my Vista Ultimate?
Previously i could not upgrade to to WM6 with Vista. had to use my XP to do it.
Thanks
P.S. Is this coocked final version WM6?
Can someone upload to different location. I cant seem to download it from rapishare. Thanks
Oh Yeah,
Great Faria i downing it right now
If its even better then your 3.3 with 8mb pagepool well then it is terrific
with the greatest respect.
thankx
kast said:
Thanks!
Had put yesterday MBE... Gotta try this one now!
BTW,
You mean it doesn't share modifications that were present in other WM6 roms, that yours comes from a clean WM6 and you added your own stuff?
Or that it's not a WM6 core...?
Got a bit lost reading, sorry.
Ka.
Click to expand...
Click to collapse
yes this rom has nothing to do with any prereleased wizard rom,or parts.
kyakubov said:
Faria,
can i upgrade to this rom using my Vista Ultimate?
Previously i could not upgrade to to WM6 with Vista. had to use my XP to do it.
Thanks
P.S. Is this coocked final version WM6?
Click to expand...
Click to collapse
no....we been unable to crack the vista update utiility so far.....
kyakubov said:
can i upgrade to this rom using my Vista Ultimate?
Click to expand...
Click to collapse
The ROM image doesn't really care whether you're using Windows XP or Windows Vista. Without knowing the details, I'm guessing that the problems you're having have to do with the new security "features" of Windows Vista.
What you'll need to do is once you've downloaded the ROM image to a location on your local hard drive, right-click on the file and select "Run as Administrator". You will be prompted to "Allow" or "Cancel", select "Allow" and you should be OK from that point forward.
Dwimmerlaik said:
The ROM image doesn't really care whether you're using Windows XP or Windows Vista. Without knowing the details, I'm guessing that the problems you're having have to do with the new security "features" of Windows Vista.
What you'll need to do is once you've downloaded the ROM image to a location on your local hard drive, right-click on the file and select "Run as Administrator". You will be prompted to "Allow" or "Cancel", select "Allow" and you should be OK from that point forward.
Click to expand...
Click to collapse
Not really, the problem I had was , it started to upgrade and when the phone restarted and the rainbow appeared the connection was lost between PC and phone.
I hope I was able to explain it correctly.
Thanks Faria for your reply.
Am I allowed a joke?
It could be a bit scary to see a new rom published and read the following in your signature:
HTC WIZARD ON REPAIR
Click to expand...
Click to collapse
No offense meant, just joking, we all know quality of your roms.
Ka.
kyakubov said:
Not really, the problem I had was , it started to upgrade and when the phone restarted and the rainbow appeared the connection was lost between PC and phone.
I hope I was able to explain it correctly.
Click to expand...
Click to collapse
The issue you are havings is a known issue. The flash utility looks for ActiveSync, and since Vista does not use ActiveSync but its own mess, you wont be able to flash with Vista.
Can anyone provide a mirror link?
Ok before Faria gets slammed with posts about the flash freezing at 99%.... this is normal. All ROM's (Even releases by HTC or your carrier) have a point when it looks frozen but its not.
Also one thing I have seen is that people expect these things to be perfect OOB (out of box), this is never the case. There will always be a few little kinks and if you read the forum you will either find the answer in this post or another. So read before you post.
On another note, faria I love this release. So far no issues seen, but i will run the phone hardcore as i usually do to see if there are any issues. Thanks again for all your hardwork in putting this release out.
Some people who where trying to update to WM6 on Smartphones like Dash had a problem with "Invalid Code ID"... (me as well).
The procedure to solve the prob was to use the "Unlocker" program provided by some companies, disconnect cable when it asked for a file, close the program and continue to flash with "modded files" (the modded files were specific to the "vendor ID" prob).
Whe you run the unlocker, ActiveSync disconnects, at least looks so.
In this case my "noobish" mind could think the unlocker is actually handling by itself the connection... In this case, using this procedure, it should be possible to run the upgrade even from Vista.
On the other hand, the unlocker might just disconnect ActiveSync but still be using MS drivers, which are probably different in Vista.
Maybe I'm not used to think and I'm just saying nonsense.
Ka.
Zer0 said:
Can anyone provide a mirror link?
Click to expand...
Click to collapse
Appreciate it if someone would provide a mirror link. Thanks
Crossbow WWE
AHHHHHHH!!!.. My prayers have been answered.
Thank You
Faria.
Question why remove the pdf reader. I like the Adobe ( i get alot of attachments daily)
daddy_yankee1980 said:
Appreciate it if someone would provide a mirror link. Thanks
Click to expand...
Click to collapse
Rapid works just fine...
--M

5.2.1413 mUn Base - Pandora 02.x2 ROM Beta

Why am I posting a new build?
1. Additional applications over first beta test.
2. Batter life has shown to be good.
3. Reports of A2DP working.
4. Looking for bigger audience to test before releasing.
5. Stable operation - more than 2 days without reset and counting.
6. Extensive use of compression where possible.
7. Results of testing are fed back into Pandora's Box Kitchen.
Here's the stats:
02.12 and 02.22
X-Button 1.0
Mobile Justice
Notepad
PHM Reg Editor
PIM Backup 1.9
Pocket RAR
ShutXP
SMS Backup
Start Clean
Total Commander 2
WM5torage 1.7
Zip
Transcriber
Enterprise
Entertainment
Office 2007
VoIP (02.22 only - not enough space in 02.12 due to VC)
BtCrawler
MMS
Windows Live
Camera
Camera Themes
Windows Media Player
WMP Today Plugin
PocketXPDF
XCPU Scaler 2.96 (this appears to be a pay-for-use software... removing from next rev... try omapclockplus)
Custom Keyboard
Voice Speed Dial (02.22)
Voice Command (02.12)
Disconnect Button GPRS fix
Lunar Calander
Time Sync Tab
Error Reporting disabled
Disable security warning
Cleartype in landscape
Emable 802.11g
increase ring volume
enable clock on all screens
show slideout keyboard capsdot
Tomorrow's Appointments
Two seperate roms, one with Voice Speed Dialer, and one with Voice Command. Otherwise, they're exactly the same. They include the camera themes.
Issues:
BatteryStatus doesn't seem to report batter draw correctly. I would recommend using either Smartkey and OMAP - or no overclock at all!
There may / may not be issues with Java or Flash in IE. Not confirmed, or solution provided (yet).
This build has lots of packages / fixes / perks from all around the forum. When the beta is done, the release I will attempt to give credit where known / due.
Here's the numbers(02.22):
Storage: 44.12
Program: 30.80
Downloads:
========================
02.12 - Voice Command
RapidShare Link
MegaUpload Link
SendSpace Link
02.22 - Voice Speed Dialer
RapidShare Link
MegaUpload Link
SendSpace Link
========================
I also build a more stripped version - 02.05:
Camera
Office
Windows Media Player
Disconnect Button GPRS fix
Error Reporting disabled
Disable security warning
Cleartype in landscape
Emable 802.11g
increase ring volume
show slideout keyboard capsdot
Download:
=========================
RapidShare Link
MegaUpload Link
SendSpace Link
=========================
Please give your favorite config a try and let me know.
;;;;;;;;;;;;;;;;;;;
Still using 01.10.10, may give a shoot to 02.xx later.
I notice a strange thing. After you told me the registry setting to switch off WLAN preload, the problem that IE abnormal after 6-7 pages has gone! I tried to power cycle the device for several times and the problem does not show anymore.
starkwong said:
Still using 01.10.10, may give a shoot to 02.xx later.
I notice a strange thing. After you told me the registry setting to switch off WLAN preload, the problem that IE abnormal after 6-7 pages has gone! I tried to power cycle the device for several times and the problem does not show anymore.
Click to expand...
Click to collapse
Nice find! I didn't include that fix here either because of battery life, but it sounds like it has even bigger / better benifits. Thanks!
i'm using 02.05 but battery life is not as good as your 02.21 usage, what's the differences?
bachikho said:
i'm using 02.05 but battery life is not as good as your 02.21 usage, what's the differences?
Click to expand...
Click to collapse
A few things maybe - I keep the phone locked and powered off when not being used (keeps the screen from "coming awake" every minute or so), I don't run batterystatus, I keep beam and wifi off unless I need them, and don't have the screen brightness cranked up. Other than that, I used it as described.
Edit: also, I remove everything but WifiInit and CapNotify from the startup folder.
Using 2.5
I have been using it for two days with no problems whatsoever! Battery life is good. Device is quick and responsive. A++++ for a stable, bare bones ROM!
hey bro great ROM...just a quick question....is this based on the latest build of WM6 ?
ranasrule said:
hey bro great ROM...just a quick question....is this based on the latest build of WM6 ?
Click to expand...
Click to collapse
From what I've seen, yes - 15.2.1413. It is mUn's release and doubleOfour extracted it into his base kitchen - and heavily tweaked from there.
mattk_r said:
Edit: also, I remove everything but WifiInit and CapNotify from the startup folder.
Click to expand...
Click to collapse
can i delete init_tray.lnk and poutlook.lnk (what r their functions)?
bachikho said:
can i delete init_tray.lnk and poutlook.lnk (what r their functions)?
Click to expand...
Click to collapse
init_tray is for the batter icon and comm manager icon in the quick launch bar at the bottom of your screen.
The poutlook should be for kicking off the service for your outlook program - I don't use it, but even with other programs like voice speed dial, I can remove the sddaemon from startup and the program still works fine.
I'd suggest just moving them to your SD card and trying it!
thought i'd point it out, you included both PIM backup 1.9 AND SMS backup.
PIM Backup 1.9 will actually also back up your text messages for you (inbox and everything, including your outlook folders)
would save space if you removed SMS backup. unless there is a demand for it of course!
downloading right now and will be flashing soon! +
oh, and if you could actually make COMPLETE releases. by that i mean, when you upload, can you include the Rom Update Utility with its DLL's as well please.
thanx
duke_stix said:
thought i'd point it out, you included both PIM backup 1.9 AND SMS backup.
PIM Backup 1.9 will actually also back up your text messages for you (inbox and everything, including your outlook folders)
would save space if you removed SMS backup. unless there is a demand for it of course!
downloading right now and will be flashing soon! +
oh, and if you could actually make COMPLETE releases. by that i mean, when you upload, can you include the Rom Update Utility with its DLL's as well please.
thanx
Click to expand...
Click to collapse
so is there consensus that SMS Backup should be ax'd? I'll pull it from the release - which will alos include the update utility!
Well, my initial comments on the 2.22 build is that while using Live, omap, smartkey, and Weather to go, the batter is taking a good beating.
I think all this extra crap just eats up juice. I'm re-evaluating their importance relative to batter life...
Otherwise, I haven't had any issues to speak of.
Looks good...will give it a whirl after I cook dinner...lol
?...Why does everyone put Temp Internet Files on SD card...?
I like to keep them on the device....
dwny said:
Looks good...will give it a whirl after I cook dinner...lol
?...Why does everyone put Temp Internet Files on SD card...?
I like to keep them on the device....
Click to expand...
Click to collapse
I don't install or set anything to write to the SD either. I figure the SD is best for things like installation files or MP3's. The programs waste enough battery power when running, why have programs accessing the SD also and draining it more?
I just cooked up an extended rom, which includes the following cabs:
CAB: \Extended_ROM\MP-Shorcut-MMS1-Java5xx-CyberonVoice-CV-051220.CAB
CAB: \Extended_ROM\P_Conn_CWS_APR12_Wizard.cab
CAB: \Extended_ROM\P_JavaGUID_HotFix.sa.CAB
I may be posting that I have a fancy brick in a few...
I'm installing this with a mild vanilla rom I'm trying out, getting ready for release...
i think i MIGHT have found a big problem.....i simply cant get WIFI to turn on via the comm manager....could this have anything to do with the fact that i dont have any WIFI connection available in the vicinity ?? i mean WIFI should atleast turn on shouldn't it?? otherwise great rom
try change HTCPreloadWifi to 1 (u have to SR after that)!
Or try to click it once more and it will be up.

Touch Software Collaboration

I wanted to get a thread dedicated to getting the applications out of the Touch .nb, and into the Wizard - and specifically the "cube" and "touch" functionality that is the trademark of the new phone.
Please save "oh, I'd like" or "oh, wow" stuff for other threads - this is a dev discussion.
Criteria: Working discussions on what's been done, what are we doing, and what could be done to get the excellent new features to work.
I hope that by sharing information - we can key in on the results much faster then everyone working on their own.
Software Packages
This post is a running list of applications, and their status:
Application............. .Status:
HTC Camera ............. .???
MediaHubMini ............. .???
QuickDial ............. .???
Streaming Media ............. .???
Streaming Player ............. .???
Cube ............. .French rom working, no WWE yet
Dialer Pad ............. .Done
Comm Manager ............. .Done
Today Home Theme ............. .Done
If someone can PM me who's current on this thread, I'll update the remaining items.
.
Kickoff Status
Here's what I've tried so far:
Using the 1413 as a base, I've taken and replaced the OEM folders from the touch build and replaced the 1413 folders -completly. This resulted in the phone self power cycling at the 3rd splash screen.
I've also taken the entire touch build, replaced the ROM contents with the one from 1413 (and I might have replaced the /SYS/OS folder as well - going off memory). This was the most successful, as I was able to boot the phone and get a lot of the touch's functionality. Issues were: SID Lock error, no "touch" function, and button mapping was wrong - only button 1 showed up on settings - buttons.
More info (a little)
Well, to follow up on my note in the other thread. I did pretty much what you did and ended up in the same place.
I did discover that the two other "raw" files in the original leak contained xip contents. I'm not sure why there are two of them, and they contain similar contents. I ran a build using the one I've labeled xip1 and it gave an error about missing build.rgu in buildos. I then ran a build using the one I labeled xip here (which has a build.rgu) and it built and booted, but worked essentially the same as when using an older wizard xip.
Anyway, time for bed now.
PS I tried to upload a zip of the two xip sections but it failed. Forum maintenance I suppose. Maybe I'll try again tomorrow if anyone seems interested.
Edit: Tried again to upload, failed.
I think we should start by the Dial Pad... I think it will be the easy thing to do.
Check this Hermes Rom:
http://wmblack.info/
and this:
http://www.4winmobile.com/forums/hermes-black-rom-support/9792-released-black-iv-shadow.html
Why not port the entire ROM ?
Just a thought.
BTW, from what I know, in order to make it work, you will have to use the XIP from the Wizard, not the one from Touch.
I have some work now...but i will try and do that bit later...today or tomorrow.
anichillus said:
Why not port the entire ROM ?
Just a thought.
BTW, from what I know, in order to make it work, you will have to use the XIP from the Wizard, not the one from Touch.
I have some work now...but i will try and do that bit later...today or tomorrow.
Click to expand...
Click to collapse
I also thought this... But now we have an official build from ms... I think it is a bit more stable than a ported version (if i'm wrong, please correct me).
@joaosousa:
I tried to port the Dialpad yesterday... But it seemed that I missed some needed files/registry hacks.... Still trying.
Vi
I also think we should keep the official build from ms... It's very stable...
any luck with touch dialer skin?
In all seriousness... the Today plug-ins for the HTC touch are fricking ugly.
Anything new in here?
joaosousa said:
Anything new in here?
Click to expand...
Click to collapse
Ya... I just flashed my wizard... Without the correct XIP partition -> stuck at 87% but bootloader works... so i think i'll get my wizard back
vi
omg... Hope all goes right with your wizard...
For those who want to play...
OK, for those who want to play with the Touch Rom, here's a rapidshare link to download a "working" nk.nbf. I've also included total commander, and a registry editor for those who might want to tinker with getting things to work.
The main issues are these:
1) Pull the sim card before flashing, or you won't be able to to get to the today screen.
2) Since the elf is only a one button machine, most of the buttons do nothing, including the power button. You'll have to take out the battery to turn it off. (Unless you can figure out the registry changes needed to make it work.)
3) Don't worry about setting your timezone in the initial screen. You can set it later from the settings menu.
4) Be ready to flash back from bootloader mode when you're done exploring!
5) I pulled adobe acrobat, catalog, autoupdate. Everything else is pretty much stock. So you can get a feel for what's included, and what you might want to pull for use in the Wizard!
This is OS only.
Have fun!
Rapidshare Link: http://rapidshare.com/files/36574080/TouchROM-nk.nbf.rar
Here's a question to those who have tried it so far: has anyone seen it working, or know which application controls the 'cube' function? Is it the biotouch app?
edhaas said:
OK, for those who want to play with the Touch Rom, here's a rapidshare link to download a "working" nk.nbf. I've also included total commander, and a registry editor for those who might want to tinker with getting things to work.
The main issues are these:
1) Pull the sim card before flashing, or you won't be able to to get to the today screen.
2) Since the elf is only a one button machine, most of the buttons do nothing, including the power button. You'll have to take out the battery to turn it off. (Unless you can figure out the registry changes needed to make it work.)
3) Don't worry about setting your timezone in the initial screen. You can set it later from the settings menu.
4) Be ready to flash back from bootloader mode when you're done exploring!
5) I pulled adobe acrobat, catalog, autoupdate. Everything else is pretty much stock. So you can get a feel for what's included, and what you might want to pull for use in the Wizard!
This is OS only.
Have fun!
Rapidshare Link: http://rapidshare.com/files/36574080/TouchROM-nk.nbf.rar
Click to expand...
Click to collapse
what do you mean of working nbf, did you mean it is Touch fully rom, or mixed with wizard rom??
anichillus said:
Why not port the entire ROM ?
Just a thought.
BTW, from what I know, in order to make it work, you will have to use the XIP from the Wizard, not the one from Touch.
I have some work now...but i will try and do that bit later...today or tomorrow.
Click to expand...
Click to collapse
Yes, understood. I think the fact that it works just as well with either XIP just shows how similar the two machines actually are. Either that, or whoever "leaked" the rom included an appropriate XIP on purpose.
its right said:
what do you mean of working nbf, did you mean it is Touch fully rom, or mixed with wizard rom??
Click to expand...
Click to collapse
Fully Touch Rom. But it has been restructured to fit inside the partition settings of the Wizard.
mattk_r said:
Here's a question to those who have tried it so far: has anyone seen it working, or know which application controls the 'cube' function? Is it the biotouch app?
Click to expand...
Click to collapse
For me it didn't work. Did you notice a kind of "klick" every 2 - 5 seconds? it sounds like if the speaker are turnend on and off...
Vi
its right said:
what do you mean of working nbf, did you mean it is Touch fully rom, or mixed with wizard rom??
Click to expand...
Click to collapse
The SYS and OEM folders from Touch, the ROM folder from 1413 (going off assumption here - correct me if I'm wrong )

[Release] JustStableV2 Build 5 Micro Edition (73+mb FREE storage | 32+MB of FREE RAM)

Version 2: Changelog:
4MB pagepool - almost 33mb of free RAM
Based off of JustStableV2's Build 5 (unreleased) - Everything updated in JustStableV2 Build 4 also in this build
Based off of 5.2.21048
More of the ULDR partition removed. Now it's COMPLETELY gone.
Still LZX compressed and stripped on non-essentials
Also included: IS versions. (Internet Sharing)
This is a version of JustStable with the following changes:
1. Stripped of ALL non-essential programs. (Including NetCF.)
2. LZX compressed
3. ULDR removed!!! A first for the Herald. This saves around 3MB that is normally used as storage for “windows updates” which are never released. lol
All in all you get:
74+mb FREE of Storage Space!
29-30MB FREE of RAM WITH a 6mb pagepool
Due to the removal of the ULDR, the pagepool CANNOT be changed. (Although, I haven’t tried using the old way of changing the pagepool…)
Get the newest version here. (Click on the JustROMs link.)
Warning: This HAS to be flashed through an SD card.
Let me be the first to say Thank you so much Ivan. This is the micro ROM I've been waiting for. I can't even describe this ROM in words yet. It's an extremely fast installation because it's so clean. With the latest ioLite Manila2D installed, it still runs 22MB of free RAM. This is the best you'll get I assure you with the Herald if you are into the Manila2D thing like myself.
Question: Have you tried using 4MB Pagepool with your JustStable, Ivan? How well did it run? Will the Herald get more free RAM if so?
Micro ROM
Ivan this is super. I love this micro rom. Wow its super fast. Thanks!
I love it cuz I can put on just what I want. How the Hell did you get soooo much Memory? Awesome!
unknown123456 said:
Let me be the first to say Thank you so much Ivan. This is the micro ROM I've been waiting for. I can't even describe this ROM in words yet. It's an extremely fast installation because it's so clean. With the latest ioLite Manila2D installed, it still runs 22MB of free RAM. This is the best you'll get I assure you with the Herald if you are into the Manila2D thing like myself.
Question: Have you tried using 4MB Pagepool with your JustStable, Ivan? How well did it run? Will the Herald get more free RAM if so?
Click to expand...
Click to collapse
Yes. I ran fine. I chose 6mb to cover myself from people running huge programs.
Just use a pagepool changer on the NBH file and you can set it to 4mb before you flash it.
zcink said:
Ivan this is super. I love this micro rom. Wow its super fast. Thanks!
I love it cuz I can put on just what I want. How the Hell did you get soooo much Memory? Awesome!
Click to expand...
Click to collapse
lol. Secret sauce.
i love how u didnt say anything abought it then when i went for the lzf version this morning theres this teany tiny file saying micro made my day i just flashed it saw the storage and had to say bravo i love surprises and this right up there with finding the cop handcuffin you is realy a girl your friends got u on your birthday(sry its the only good surprise that i could think of in a hurry) well off to check out what 75mb can handle
ivanmmj said:
Yes. I ran fine. I chose 6mb to cover myself from people running huge programs.
Just use a pagepool changer on the NBH file and you can set it to 4mb before you flash it.
Click to expand...
Click to collapse
Yeah, I tried using a PagePool Changer but it didn't work. It's grey out and you mentioned it on your post prior to my download and attempt to changing it. That is why I'm requesting a 4MB PagePool if possible. But even at 6MB, it's has incredible amount of free RAM for the herald with the latest Manila2D that is a resource hog compared to older versions like in Tran's OTP.
unknown123456 said:
Yeah, I tried using a PagePool Changer but it didn't work. It's grey out and you mentioned it on your post prior to my download and attempt to changing it. That is why I'm requesting a 4MB PagePool if possible. But even at 6MB, it's has incredible amount of free RAM for the herald with the latest Manila2D that is a resource hog compared to older versions like in Tran's OTP.
Click to expand...
Click to collapse
Manila2D has always been a memory hog.
Are you using the newest version of pagepool changer? The first time I did it, it didn't work, the second time, with a different version, it worked.
Thanks Ivan. I downloaded the newer version of PagePool Changer from Sept 08 and it worked. With just Manila2D installed, it's at 26MB! A clean install with JustStable at 4MB PagePool gives 31MB of free RAM. This is the most free storage/ram anybody has ever created for this phone. You are a true asset to this forum and HTC/Micosoft should be paying you if they keep selling the Herald/Wing .
unknown123456 said:
Thanks Ivan. I downloaded the newer version of PagePool Changer from Sept 08 and it worked. With just Manila2D installed, it's at 26MB! A clean install with JustStable at 4MB PagePool gives 31MB of free RAM. This is the most free storage/ram anybody has ever created for this phone. You are a true asset to this forum and HTC/Micosoft should be paying you if they keep selling the Herald/Wing .
Click to expand...
Click to collapse
Haha, thanks. Yea, I plan to release a similar version of WM6.5.
4 mb Pagepool
yes thats what I'm talkin about. Awesome even more so.
Love love love love this micro rom and I can't wait for the micro 6.5. I can't get mms or the tmo oz im to work tho... anyone else have this issue or have a suggestion for me?
kristopherson said:
Love love love love this micro rom and I can't wait for the micro 6.5. I can't get mms or the tmo oz im to work tho... anyone else have this issue or have a suggestion for me?
Click to expand...
Click to collapse
Did you install Arcsoft and a connection wizard (or write the settings in by hand)?
ivanmmj said:
Did you install Arcsoft and a connection wizard (or write the settings in by hand)?
Click to expand...
Click to collapse
yes i did. everything else works really really well. except the " ; " key for some reason. mms and sms im'ing are huge for me. i average 10,000 text a month. without a data plan i like oz because it works with my unlimited msging plan
using arcsoft mms 5.0.31.7
Is there a list anywhere that tells the difference between the "full" version and the "micro" version? I know the Micro is JUST what comes with WM6.1, but since I don't know what that is, I'm not sure what's been added for the full version. I guess I could get both and write down a list myself of the differences, but since I'm lazy I figured I'd ask first to see if this had been done anywhere.
Hey Ivan LOVE this ROM... damn you are amazing man mad props to you.
Just one problem... I don't know if it's just me but some programs won't open. I don't get an error or anything. The little busy icon appears then quickly disappears then... nothing. I can't open Advanced Config or Ing Change Font...
I reinstalled Advanced Config and reseted and turned off the phone but... still nothing... Any reason why it wouldn't be working?
EDIT:
Oh haha nevermind I needed to install .net compact framework.
lennyjaxn said:
Is there a list anywhere that tells the difference between the "full" version and the "micro" version? I know the Micro is JUST what comes with WM6.1, but since I don't know what that is, I'm not sure what's been added for the full version. I guess I could get both and write down a list myself of the differences, but since I'm lazy I figured I'd ask first to see if this had been done anywhere.
Click to expand...
Click to collapse
The Micro doesn't have a lot of things.
Amongst them:
QuickMenu
wktasks
.NetCF
The Canvas Dialer
The modified taskbar icons
Mortscript (for the wing versions that use the multibrowser button)
OperaMini
The newer version of IE (which takes more space)
The extended Explorer
The Rhodium Notification Enhancements
The HTC calculator
HTC Home
The keyboard skin
MyCPL
The new Volume Control system
The deactivated Rhodium Menu Enhancement (it's there to keep the notification enhancement working due to dependencies but it itself isn't working.)
The outlook enhancements
GoogleMaps
RandomAccess (the contacts quick alphabetical bar)
more modified icons around the system
Yet more modified icons around the system
Touch Responce (the force feedback)
I think that's all.
And the Payload has been modified to remove the ULDR (update partition which isn't used anyways.)
buru898 said:
Hey Ivan LOVE this ROM... damn you are amazing man mad props to you.
Just one problem... I don't know if it's just me but some programs won't open. I don't get an error or anything. The little busy icon appears then quickly disappears then... nothing. I can't open Advanced Config or Ing Change Font...
I reinstalled Advanced Config and reseted and turned off the phone but... still nothing... Any reason why it wouldn't be working?
EDIT:
Oh haha nevermind I needed to install .net compact framework.
Click to expand...
Click to collapse
hehe, This gets asks every time I release a stripped ROM. Yep, no .NetCF.
kristopherson said:
yes i did. everything else works really really well. except the " ; " key for some reason. mms and sms im'ing are huge for me. i average 10,000 text a month. without a data plan i like oz because it works with my unlimited msging plan
using arcsoft mms 5.0.31.7
Click to expand...
Click to collapse
The ; key should be working if you're using the correct version on your phone (if you have a herald, you're using the herald, if wing, the wing version.)
Is anyone else having this problem?
The MMS and SMS, is anyone else having this problem?
ivanmmj said:
The ; key should be working if you're using the correct version on your phone (if you have a herald, you're using the herald, if wing, the wing version.)
Is anyone else having this problem?
The MMS and SMS, is anyone else having this problem?
Click to expand...
Click to collapse
I'm using the wing version for a wing.
like i said, sms works beautiful, i just cant send or receive mms, and the oz .cab won't work. should i use a different arcsoft build for this rom? I'm running spb mobile shell 3.0 and sometimes the shortcuts dont like to work after its been running for a while, but when i select it from the start menu it fails too. uninstalled and reinstalled it 3 times, did a hard reset, installed it on both the phone and sd card, always the same result. it's not super important because i use yahoo and i forward my im's to my phone when i'm not online. but i cant see my friends list that way.
even with this minor issues i'm having, i still love the rom.

Categories

Resources