Related
hi there to you all if you are like me then you have spent many hours trying to get tomtom working on your vox so i thought i would post this "how to guide"
ok first thing you do is down load the SDA_ApplicationUnlock zip and unzip it plug your vox into the pc using activesync run the program and click ok it only takes a sec but it unlocks the phone so you can use tomtom as well as other apps.
next download the how to put tomtom on vox.zip and unzip it this is a very easy guide on how to install the tomtom on to your vox with pics
next download TomTom Navigator 6.030.8320 (HTC S710 v1.0) from rapidshare.com and unrar it follow the guide and it will install everthing you need in one go no messing (easy) the only thing you have to do is find your own activate code and your own map easily found just google it and that is it. just follow the guide.
i forgot the link for rapidshare is:-
http://rapidshare.com/files/61711887/TomTom_Navigator_6.030.8320__HTC_S710_v1.0_.cab.html
i hope this helps all you people that are stuck
here is another link
http://www.mediafire.com/?ereimjtmtzz
ok i have put a link for the keygen hope this helps you guys
http://www.mediafire.com/?fzbeejm9me0
i have put tgether a voices pack for all you guys same again just click on link download and unrar into the voices folder in your card hope you enjoy them
http://www.mediafire.com/?2wtibkdg1gy
do a torrent
Good to upload a file but cannot download ,limit on numbers.
If you do a torrent of it you could upload to torrent site like pirate bay and anyone can download it.
mrmond said:
Good to upload a file but cannot download ,limit on numbers.
If you do a torrent of it you could upload to torrent site like pirate bay and anyone can download it.
Click to expand...
Click to collapse
hi if you pay rapidshare then you can get the file stright away if you just want to cheep and do not pay for it like me then you have to wait i have tried it 2 or 3 times and i only had to wait once
Installed fine but i cannot activate a single map, tried everything online.
Does this program prevent maps from being activated?
I can't download it?
It always say me that I have to whait more then 100minutes but if I wait... at the end it kick me out with some f... error.
Can you guys give me a free link to donload the CAB? Pleaseeeeee!!!
ok sorry for all you guys who are having problems with rapidshare i have uploaded it to mediafire what seems to be a good site for file hoasting so any way here is the link
http://www.mediafire.com/?ereimjtmtzz
its free and you have no need to wait or join just click the link hope this helps
bsmiley said:
ok sorry for all you guys who are having problems with rapidshare i have uploaded it to mediafire what seems to be a good site for file hoasting so any way here is the link
http://www.mediafire.com/?ereimjtmtzz
its free and you have no need to wait or join just click the link hope this helps
Click to expand...
Click to collapse
Hello,
you .cab seems interesting, but can you create a version where the installation folder is not "Storage card" but "carte mémoire". Because when we try to install it on a french SPV it says there is not enough space as it tries to install on the phone memory instead of the Storage Card.
Thank you very much.
hi there i did not make the cab up but it found it on a newsgourp all i did was to give you guys all the info in one place to get tomtom working it works fine for me in the uk and as far as i know it works great with no problems on other peoples vox i have a vodafone v1415 with a 2 gig card and it works like i say no problem
I've been trying to install the cab on my HP 514 but it doesn't works...
DOes anyone know the requirement of the TomTOm 6 for smartphone? The display resolution at 172x220 is it ok?
Hi bsmiley, and thank you very much for this great package !
Well, I hope this doesn't sounds too lame but ... I'm already stuck in the beginning with ... Fakecursor !
The tutorial says "Press the button to go to the home screen. This 'll exit the FakeCursor but now the icon of the FakeCursor is on the bar"
But ... What is the "bar" ? When I'm going back to the homescreen, the cursor actually disappears, but there's no way for me to recover it without launching it again via the start menu. And of course, when i'm switching back to tomtom installation, fakecursor is gone !
--> I can't get th fakecursor OVER tomtom installation !
And there's absolutly NOTHING on my taskbar or my "upper" bar !
Have you any idea ?
Thank you again for this great upload,
Nicolas
ok if you go to settings and in settings go to home screen when it opens up you will need to change home screen layout to windows default and then that should do it hope this helps let me know how you get on any other help then please ask
(
Hey there - thanks for this marvellous set of instructions and goodies,
however, I appear to be doing something wrong, and would find any extra help rather helpful!
I've followed your instructions - but when I first run TomTom this is what happens :
Using FakeCursor I select English UK. I'm then prompted 'English UK - YES / NO' - to which I again use FakeCursor to choose YES. And then I see the following message :
Your device is incompatible with TomTom NAVIGATOR
(and all I can then choose then is 'Continue').
Anyone have any ideas? What daft thing am I doing wrong?
Thanks guys
hi ok you need to unlock you vox first with the sda app unlocker when you get the phone for some reason you can not use certian programs so using this program makes it so you can try this and then let me know how you get on ps dont forget you do need to reset your phone after it gets unlocked
Hi there - thanks for the prompt response!
I tried running the SDA app - but I think somthing could be going wrong at this point.
The programme is called 'SDA_ApplicationUnlock.exe' and in the task bar it appears as 'SDA FULL Application Unlock' (is this the correct version?), anyway, after choosing to Unlock my phone, and accepting that this may be unsafe - I get the following message :
"Phone is not unlockable"
Its a standard Orange e650 (that is the right phone isn't it...?)
Sorry for being so dumb - I know its bound to be something I'm doing.
And thanks again for helping me out
s
Ok - I was fairly sure I was doing something wrong, and had misunderstood what was meant by 'reset' - so I have now definitely cold reset my device, and have lost all contacts etc - all a fresh start.
I was sure this was going to solve it, but when I then follow your instructions, I get the same message (you device is incompatible...)
Help?!
Thanks again
Where can i get maps and the cracks for them?Better, i have the maps, but i can´t activate then.
Thanks.
hi there i have put a file together so you can download tomtom keygens
http://www.mediafire.com/?fzbeejm9me0
just download it unrar it and say for example you have a uk map then run the uk keygen and when ask put in your device code press enter and it will give you your code no problem good luck
Thanks
But now i have this error:
Error
Unable to start
An exception occurred.Memory access violation
Click to expand...
Click to collapse
you need to take your battery out and put it back in you will get your memory back if you look at the task manager you can see how much memory you have left you should try and keep it around 20 meg ish hope this helps
location of maps
thanks for the great instructions.
where do i have to put the maps in? and do i need this fake cursor everytime i use tomtom?
edit: i found out where to put the maps but now i have the next problem:
i can only choose com port 0, 1, 2 or 9. but my gps is on com 6 or 7 (no other available).
are there anybody having the same problem?
XDA users, If this is appropiate please let it ride; if not mods please delete. Keeping it simple and to the point. I have tried several of the WM6.1 ROMs however, none seem to work with Blackberry Connect. Please list your ROM if you have blackberry connect working? As well as the version of BB Connect.
Thanks,
CP
Hello i dont have an answer to your question, sorry! in fact have a question for you instead i removed the bloatware from my tilt and now cant find BBconnect software anywhere i reallly dont want to have to put all the bloatware back on just so i can get BBconnect. Is there somewhere I can download BBconnect? I tried the link in one of the posts here but it sent me to the HTC site where they explained how to install but there wasnt anywhere to actually get the software. If you have any suggestions please let me know. Thanks good luck! maybe i should have just stayed with BB???
Noxqs
cp1md2b said:
XDA users, If this is appropiate please let it ride; if not mods please delete. Keeping it simple and to the point. I have tried several of the WM6.1 ROMs however, none seem to work with Blackberry Connect. Please list your ROM if you have blackberry connect working? As well as the version of BB Connect.
Thanks,
CP
Click to expand...
Click to collapse
I have Duttys 6.1 and use conect 24/7
noxqs said:
Hello i dont have an answer to your question, sorry! in fact have a question for you instead i removed the bloatware from my tilt and now cant find BBconnect software anywhere i reallly dont want to have to put all the bloatware back on just so i can get BBconnect. Is there somewhere I can download BBconnect? I tried the link in one of the posts here but it sent me to the HTC site where they explained how to install but there wasnt anywhere to actually get the software. If you have any suggestions please let me know. Thanks good luck! maybe i should have just stayed with BB???
Noxqs
Click to expand...
Click to collapse
america.htc.com/mobile/connect/8925
How To Enable BBC CONNECT TO THIS ROM
Install instructions:
1) goto hklm>system>versions and change what ever is there to .0.4.2 (The leading . before the 0 needs to be there)
2) Install bbconnect cab file.
3) If you don't get the check boxes at the end of the install (Calendar, notes, etc). Re-run the install (it will remove the 1st instance), I always get it the second time.
4) Wait for Blackberry to finish "setting up device for first use" and let it reboot.
5) On reboot, status will now show the PIN number.
6) Open the Blackberry connect desktop application. (Make sure you have access to your corporate e-mail) If you do you will see "Configure Wireless Device" as active.
7) Plug in the Tilt and wait for Activsync to finish syncing and says "connected".
8) In the BB Connect desktop application hit the "Configure Wireless"
9) When finished unplug Tilt and soft reset.
10) You should be good to go at this point.
thanks austin!
did that & able to use it now. i was about to use the search when i saw this thread. saved me some time.
I am trying to download some apps to my Fuze. There are a lot of them that call for the NET compact 3.5. I downloaded the NET. c directly onto my phone but when I went to open and install it said that this is not a program for windows mobile. I'm new to this and would appreciate any help. What do I need to do? I tried installing the NET. c on to my computer but it didn't do anything either. Thank you for your help.
amstaff72 said:
but when I went to open and install it said that this is not a program for windows mobile.
Click to expand...
Click to collapse
Is it possible that these are installers you're supposed to run from your computer and they finish their install over an activesync connection?
It might help if you let us know which apps you're trying to install and where you got them from (non-pirated of course).
You need the rigth cab http://www.4shared.com/file/70602905/58d46ffa/NETCFv35wmarmv4i.html
Thank you for replying. I tried to do searches but I kept timing out on the xda website (dial-up only in my area), so I looked on the net. All I could find was a download from microsoft. For some reason I am also having trouble with my active sync. The disk that came with my phone says it needs the new adobe flash player which I have but it won't read, it's having problems with vista. So because of these problems I need to download directly to my phone I guess. The download NET c from microsoft was the one that said it wasn't for windows mobile.
I am just trying to load some different apps to my Fuze for more usablility, games like scobble, a ram cleaner things like that. Nothing pirated for sure, but most I find if not all need the new NET to work.
Any help or ideas would be much appreciated, thanks again.
Thanks araponga I will give that a try.
Hi,
I am new on this portal but I read a lot in the last days and was very surprised of the solutions you find and also the apps you made working. Great
I know its not looking very good to ask as newbie for help but I hope you can help me... I am searching for more than a week for a solution and tried even to edit the registry but unfortunately I am not good enough to find the solution
So what do I want do to?
I have a HD2 (branding free) and I want to install Avaya One-X mobile.
Well the installation was succesfull and I also get it running inside my company and also the private modus. But since I have it installed I hear no ringtone. It always plays an "ding" and thats all.
So right now I always have to keep my eyes on my mobile to see if someone calls me or not.
And the second problem is that I also get no caller picture displayed..
But as soon as I deinstall the one-x everything is working (phone rings and caller picture is displayed)????
So you are my last hope to find a solution. Please can you help me?
If you need any further infos please let me know
Thanks
Frank
oh... the one-x mobile software is free for download on the avaya webiste
I can post you the link later (I am not allowed to post it right now...)
i'm getting mad with it...
Now I am a step further.. I now that the software deactivates the onboard call handler. I think it is only a registry setting to reenable it. after done the caller name+picture should be displayed and even the call-slider should be back.
Does someone have an idea where I can find the entry?
well now I know exactly the differents between the registry with one-x installed vs without. But I have no experiences in reading/interpreting my results.
Is a Dword something which can be used as name? or is it only a value?
Does someone has a guide for beginners please?
Did you contact Avaya support for assistance?
I have recently taken over all our telecoms at the office (avaya system)
Saw your post on One-x and been reading a little on it. Where did you get the install files from and did you get it working in the end?
I have a support contact with a company called central so I can contact them for free advice if needed
is this the version you are using?
http://support.avaya.com/css/appman...loads/P0438/5.2.x/C201012083328498084#summary
I'll take a look at what the installer does as I've not heard of it before but it's not letting me register to download it .
yep that's the software I am trying to download
Could not create an account either
I have emailed my support company and they will be sending the software to me on a disc.
thanks for your responses.
I installed the version for pocketpc WM6 (not the UC version) and yes it is working fine
But:
The problem I have is that since I have it installed it
- my mobile does not play a ringtone any more
- "slide to answer" and "show caller name+picture" is away
When I get the disc tomorrow ill post up the results.
This app will be very helpful if i get it working
As for the no ringtone issue I am not sure.
I would attach it... but i have no permissions...
@ fards: there are two versions. one for "Windows mobile 5"and the other one for "Windows mobile pocket pc" (here you can find it for WM6). the first is a UC versions. For this you need an internet connection and a uc-server running in your company. the other one is for normal mobile use. it calls via the phone connection the server and then your call is managed by the server.
support.avaya.com/css/appmanager/public/support/Downloads/P0483/C20090710162819340875658#files
you can find it here for free and you need no login
I do not see the HD2 listed as compatible device.
Did you get it working or still having problems?
How does the Avaya interface on the mobile phone look like?
Is it replacing the WM dialer completly or only while Avaya software is running in the background?
I have just installed it onto my HD2. The install hung at the end for about 20 mins. Reset device and the software has replaced my dialer. Appears to be working but im reading on how to configure the ini file now.
Tested on personal mode and call connected fine.
it replaces the dialer completly...
for the ini file you need the settings of your ACM. here you have to enter different extensions for each function...
you also has to to enter your mobile number in the ACM. Because your are identified via your number.
But can you test if you get a ringtone for incoming calls? thats my problem. I get no
Just to draw a conclusion to this This topic. This solution does not work correctly on HD2. Unless someone has managed to do this and has not shared?
sry... I was offline for a while... Does somesone find the solution?
No i gave up in the end..... bloody crap
just flashed a new ROM, and got busy updating the programs I have in my AutoInstall folder. When I found this link: https://support.skype.com/faq/fa10411
In case someone needs it anyway, I attached the latest version I found in my own 25Gig XDA/Leo Archive . enjoy!
[EDIT] crap! max .cab allowed attachment filesize is 8MB, skypemobile.cab is 11MB, so I cannot attach it here...
PM or IM me if you need it.
[/EDIT]
hi,
i need it
I'd love it! tried pm'ing you but wouldn't go through? Could you pm it to me?
Thanx in advance!
Did you hear about external servers?
Everyone who wants latest and last Skype version you can download it here: http://www.multiupload.com/FY0NH0QH9I
Thanks for the link! Appreciated.
What's this fuss all about, guys?
http://www.google.ru/search?q=Skype...&oe=utf-8&aq=t&rls=org.mozilla:en-US:official
FRANQ_23_PL said:
Did you hear about external servers?
Everyone who wants latest and last Skype version you can download it here: http://www.multiupload.com/FY0NH0QH9I
Click to expand...
Click to collapse
Did someone try it on Samsung Omnia II?
can i have link. Thank so much
you have it above your post: http://www.multiupload.com/FY0NH0QH9I
thanks for the link
question..
How do u get video calls on skype?? I have it on my computer and i'm trying to test it out can any1 help thanks..
I don't think it supports video calls.
thanks....
nothing works, i keep installing it, and it never connects.
does it work at all on windows mobiles?
darkredphantom said:
nothing works, i keep installing it, and it never connects.
does it work at all on windows mobiles?
Click to expand...
Click to collapse
yes it is working, and when you had asked our biggest friend google, you had find the answer. You have to change one time your password via youyr PC skype. Then close you pc skype client (sign out and exit .. be sure that skype is completely stopped). Then login again on your PC with the new password. Then login via your mobile phone with the new password. It is working well in this way since two month without any issue....
1. You have to change one time your password via youyr PC skype
2. Then login again on your PC with the new password
AT this point do i remain connected in the pc and connect through my mobile?
darkredphantom said:
1. You have to change one time your password via youyr PC skype
2. Then login again on your PC with the new password
AT this point do i remain connected in the pc and connect through my mobile?
Click to expand...
Click to collapse
This is to check that your changed password is working in the PC too, not more
Just tried it and nothing
LOL im in, idk how but im in!
any way to make it work?? or a simmilar/easy to use VOIP software?