how do you know which firmware is installed on my android?
Go to Settings>About Phone
That will give you all the firmware,kernel and rom information
Related
One day, I tried to find the way to restore my nexus s before I may flash any rom in the future. I dl the rom manager and I found the stock rom of nexus s(I didn't know it is for I9020 or I9023) and flashed it.
Then, I discovered that the baseband version was chanced to bei9023XXKB1 and the build number is GRI40...
I found various way to restore my nexus s to be HKT version hardly and I have found the way to restore nexus s to be HKT(Baseband version is i9023XXKB3 and Build number is GRI54) through Odin3. However, after I rooted the device and dl the titanium backup, it did not work(force close forever). Therefore I need a clear 2.3.3 rom with Baseband version is i9023XXKB3 and Build number is GRI54 HK rom (whatever using recovery mode install zip file from sd or Odin3)
and a few question
when I enter the bootloader mode in my device, I found that the bootloader version is I9023XXKA3, is there any problem?
thx for help.
hi
just downloaded and flashed V21A_00.KDZ FIRMWARE Official European GB. took a long time but im now running android 2.3.5. i am looking to flash the thiaiz rom but am a little confused about the baseband.
have i installed the latest baseband with the kdz file above? or do i need to complete this step: http://forum.xda-developers.com/show...47&postcount=2
got half way through it but didnt work. current baseband is L6260_MODEM_SIC_01.1042.00
thanks
hello
the new(gingerbread) baseband automatically flashed when you flashed the gingerbread KDZ..you can go ahead and root the phone and install thiaiz rom
right, i got the rom up and running. do i install the framework.zip through cwm or do i unzip it on my computer then install the apk's through file explorer? also it says on his page that it can be slightly over-clocked. what can i use to do this?
thanks for your help
hi,
i have a htc sensation with android version 2.3.3 and i am trying to update it to ics. i get an error just like the one in the attached image.
the phone is from US and i am based in Europe
I would appreciate any suggestions on how to fix this. Thanks!
pitutz said:
hi,
i have a htc sensation with android version 2.3.3 and i am trying to update it to ics. i get an error just like the one in the attached image.
the phone is from US and i am based in Europe
I would appreciate any suggestions on how to fix this. Thanks!
Click to expand...
Click to collapse
Do you have the stock recovery installed? It will only flash the official OTA update with the stock recovery. You can not use a custom recovery like Clockwork Mod Recovery or 4EXT Recovery.
firstly can you get a a signal with your phone since i do believe you got the 4g model?? also have you done a system factory restore before you try to update, you might need to backup either first, maybe it got to do with version or CID on your phone, not to sure never dealt with an international phone before... give more details, like software version and kernel version,
T-Macgnolia said:
Do you have the stock recovery installed? It will only flash the official OTA update with the stock recovery. You can not use a custom recovery like Clockwork Mod Recovery or 4EXT Recovery.
Click to expand...
Click to collapse
I just got the phone yesterday, so I don't know if it has stock recovery. Can you tell me how i can check this please?
If I don't have it, i could use some instructions on what i need to install.
Thanks.
darkwildchild79 said:
firstly can you get a a signal with your phone since i do believe you got the 4g model?? also have you done a system factory restore before you try to update, you might need to backup either first, maybe it got to do with version or CID on your phone, not to sure never dealt with an international phone before... give more details, like software version and kernel version,
Click to expand...
Click to collapse
hi
yes, signal works, although the available network is a 3g one. i got the phone yesterday so i don't know if the previous user did a system factory restore - i have not.
details you asked for:
- android version: 2.3.3
- software number: 1.34.666.1
- kernel version: 2.6.35.10 - ge52b0af, [email protected]#1, SMP PREEMPT Thu Jun 2 21:21:05 CST 2011
- baseband version: 10.46.9007.00u_10.12.9007.01_m3
- build number:1.34.666.1 cl79935 release-keys
Let me know if you need other details. Thanks
Can anybody help me with this?
Hi. I've just updated my phone, S2 into 4.1.2 version. Before that I have my root but after the update, it's gone. I have been searching thru the internet on how to root my specific model but I cant find it because of the difference in baseband. I got the Malaysian baseband version.
Here's my phone's information:
Model number: GT-I9100G
Android version : 4.1.2
Baseband version: I9100GDXLS2
Is there a root for this baseband version ? If got please do help me with it. I need to root my phone
mwck said:
Hi. I've just updated my phone, S2 into 4.1.2 version. Before that I have my root but after the update, it's gone. I have been searching thru the internet on how to root my specific model but I cant find it because of the difference in baseband. I got the Malaysian baseband version.
Here's my phone's information:
Model number: GT-I9100G
Android version : 4.1.2
Baseband version: I9100GDXLS2
Is there a root for this baseband version ? If got please do help me with it. I need to root my phone
Click to expand...
Click to collapse
Try to flash a another stock rom : http://www.sammobile.com/firmwares/
And then root that ROM
Would flashing another ROM erase my stuffs in the phone ? Or does it just change the baseband version
mwck said:
Would flashing another ROM erase my stuffs in the phone ? Or does it just change the baseband version
Click to expand...
Click to collapse
Make a backup and try things out. Rooting will not delete your stuff, flashing another rom will.
Try the normal S2 way or rooting, and it should work. There are no specifics in rooting based on baseband, if that was the case, you would have 500 forums in XDA for just one device, all about rooting.
Try it out and make a backup.
shadowcore said:
Make a backup and try things out. Rooting will not delete your stuff, flashing another rom will.
Try the normal S2 way or rooting, and it should work. There are no specifics in rooting based on baseband, if that was the case, you would have 500 forums in XDA for just one device, all about rooting.
Try it out and make a backup.
Click to expand...
Click to collapse
Ah I see. Okay if thats the case, I've already boot it into a recovery mode before. But only option i found there is "reboot system, update from external card, update from ABD, wipe data, wipe cache, and update from cache". That's all. I couldnt find my root file like previously when I rooted my 2.1 android S2
Owhyeah, do i have to enable usb debugging for flashing the stock rom and root ?
I have a new D850 that I want to flash my backup from my other D850 onto. The new one is:
Code:
Android version
5.0.1
Baseband version
MPSS.DI.2.0.1.C1.13-00058-M8974AAAAANPZM-1
Kernel version
3.4.0
Build number
LRX21Y
Software version
D85021r
Security software version
MDF v1.1 Release 3
So my goal is to get TWRP onto it, ideally 2.7.8.0 as that's the one on my old phone I made the backup from, but any version will do.
What are my options? My understanding is that:
I need root to install TWRP
D850 10F and above cannot be rooted currently
However, it is possible to downgrade... and then root?
Do I really need to go through all of that just to flash my backup? Is there a simpler way to get TWRP loaded?
If not... can someone explain the downgrade process? I see hyelton's guide, but I'm so very confused as to which of the methods (LGUP, KDZ, TOT) apply to my situation – D850, downgrading from 10R to something rootable – and which files I'd actually need... :S
phnord said:
I have a new D850 that I want to flash my backup from my other D850 onto. The new one is:
Code:
Android version
5.0.1
Baseband version
MPSS.DI.2.0.1.C1.13-00058-M8974AAAAANPZM-1
Kernel version
3.4.0
Build number
LRX21Y
Software version
D85021r
Security software version
MDF v1.1 Release 3
So my goal is to get TWRP onto it, ideally 2.7.8.0 as that's the one on my old phone I made the backup from, but any version will do.
What are my options? My understanding is that:
I need root to install TWRP
D850 10F and above cannot be rooted currently
However, it is possible to downgrade... and then root?
Do I really need to go through all of that just to flash my backup? Is there a simpler way to get TWRP loaded?
If not... can someone explain the downgrade process? I see hyelton's guide, but I'm so very confused as to which of the methods (LGUP, KDZ, TOT) apply to my situation – D850, downgrading from 10R to something rootable – and which files I'd actually need... :S
Click to expand...
Click to collapse
I've already responded to your post while back ;p Only the tot method is available for the D850 as stated.
Sent from my iPhone using Tapatalk