Something Went Wrong - HardSPL - Tilt, TyTN II, MDA Vario III Windows Mobile ROM De

First of all, thank you to all the modders out there. Next, thanks to everyone who gave a little time to help me with my problem.
A little background: I have an ATT Tilt, it is about 18 months old and for the most part has been functioning great. I have had several different ROMs on here - I probably have had 12 or so ranging from 6.1 to 6.5 and back. I have been using HardSPL for as long as I can remember. The most current ROM I had was a clean 6.5 Build 23003. It was working really well, except for sometimes I couldn't get the phone to come out of sleep mode and I would have to soft reset. It started happening more and more frequently, so I decided to reflash to Ultimate-X2.V6 -23004. As I was reading through the thread, he recommended HardSPL 3.34 and Radio 1.71.xxx. No problem I said, so I went off to flash 3.34 to replace my 3.56 SPL. I was using a 1.65 radio, but I never got the chance to upgrade.
So thats where the problem starts. When I try to flash the 3.34 SPL (following the instructions and using JumpSPL) it flashes, but then the phone doesn't reboot. I figure the SPL wiped out something, so following the recommendations in the Ultimate X2 thread, I attempt to flash the ATT Stock ROM. I start the phone up in bootloader mode (the bootloader still says 3.56 - interesting eh) and then flash the ATT Stock ROM. The ROM installs but the phone never reboots...
I have tried flashing Radios and other ROMs and redoing the SPL, but the phone just doesn't boot. I can reliably get to the bootloader screen, but it still says 3.56. I tried following the Wiki for "Kaiser Stuck in Bootloader" and flashing ROMs or SPL that way, but it still doesn't work.
I would also love to give you guys that diagnostic information (I should have done this last night) because I was able to view it, but now when I try to boot KAISDIAG.nbh from the memory card it just sits at "Loading...".
I have tried just about every step of different ways of flashing, different SPLs, etc. If there is anything anyone can recommend or try I am more than willing.
Let me know if you need more information or I need to clear anything up.
Again, I appreciate everyone taking time to read this and offer up their expertise.
Thanks,
OutrightLie

Only thing i can suggest is flashing 3.56 again with th SD card. Then 3.34 with the SD card. Or have you tried that already?

Just wondering... do you removed SIM card before flashing your new HardSPL?

I *think* I have tried that.
Does JumpSPL do anything other than put the phone in Bootloader mode? Or is all I have to do, just copy the *.nbh to the memory card, rename it to KAISIMG.nbh and then let it go. If JumpSPL does something more, I may be in trouble because I can't get to an OS.

daigoro64 said:
Just wondering... do you removed SIM card before flashing your new HardSPL?
Click to expand...
Click to collapse
I never have. Not with roms radios or SPL. I know its recomended but i have never had a issue with that.

daigoro64 said:
Just wondering... do you removed SIM card before flashing your new HardSPL?
Click to expand...
Click to collapse
I did remove it the first time, and a few times after that while trying stuff. The first time - for sure. Other times, it was in or out while I was just playing around with stuff. Hopefully something I did subsequently didn't make the problem worse.
Are there any steps I can take to if I did leave the SIM card in during a troubleshooting flash that screwed it up?

OutrightLie said:
I *think* I have tried that.
Does JumpSPL do anything other than put the phone in Bootloader mode? Or is all I have to do, just copy the *.nbh to the memory card, rename it to KAISIMG.nbh and then let it go. If JumpSPL does something more, I may be in trouble because I can't get to an OS.
Click to expand...
Click to collapse
From SD. You will need kaisdiag.nbh and then rename Spl to kaisimg.nbh. Have those both on root of card.

smokestack76 said:
From SD. You will need kaisdiag.nbh and then rename Spl to kaisimg.nbh. Have those both on root of card.
Click to expand...
Click to collapse
I will try that. I need a memory card reader here at work, so this may have to wait until I get home. The only roadblock I see, is right now I have just KAISDIAG on the memory card and it gets stuck at "Loading..." when I attempt to boot. It didn't do this last night, but this morning it seems get stuck there.

OutrightLie said:
I will try that. I need a memory card reader here at work, so this may have to wait until I get home. The only roadblock I see, is right now I have just KAISDIAG on the memory card and it gets stuck at "Loading..." when I attempt to boot. It didn't do this last night, but this morning it seems get stuck there.
Click to expand...
Click to collapse
I have one in my share folder. Might wanna get it and format the card..remember it has to be fat32 and replace the kaisdiag and SPL just to be safe.

I will give it a shot when I get home tonight - unless I can find a memory card reader before then.
Thanks!

Follow exactely this thread
http://forum.xda-developers.com/showthread.php?t=498320
Note your sdcard should be formated FAT32

I just got home. I copied the KAISDIAG.nbh and the 3.56 bootloader (called it KAISIMG.nbh) to the memory card after formatting it to FAT32. It attempts to load the KAISDIAG, but stops at "Loading...". I tried both a 2GB SD Card and an 8GB card, still no luck.
Any other things I can try?

Related

64k simcard problems! WAS: Danish ROM for S710?

I've been flashing around with english roms to see if it changed the bloody problem with the phone going into a reboot loop if a SD card is inserted.
This didn't fix it, and now there's apparantly no danish rom available from Telia, and since this isn't a Dangaard branded phone I dont have access to the ROMS on www.qtek.dk :-(
If anyone has a nordic rom of sorts, please save me from binning the phone
Edited the title to make more sense now
If ur phone only reboots with sd card inserted it means something on the sd card is causing it. Format your sd card on a PC and try again.
That's obviously the first thing that came to my mind aswell. I've tried formatting it, I've tried using a different card, etc. No use. Ends up in the reboot loop with a card inserted, boots fine without it. I can then insert the card after the device has booted without problems, but next time WM6 hangs or whatever, same problem.
Have u tried resetting the device by pressing left and right softkey simultaneously and then power on? Alternatively try the clear memory program in the experts folder.
Tried hardresseting it and using the clear memory program yes
Well then it can only be a hw defect. Get it serviced.
I've read others have this problem aswell on some of their phones. I can't really turn it in for service with a non-nordic rom anyway, so if noone has a nordic ROM they can share I'll prolly end up whacking it with a hammer...
Is your device CID unlocked and can you flash any ROM?
Have you tried flashing the Dopod 1.19 ROM?
What exact ROM version was on it (version#)? Did you then down- or upgrade it and to which version? Did you make a backup of the ROM using pdocread as described in the wiki?
I would leave the hammer in ur toolbox for now. I'm pretty sure the thing can be rescued if it is indeed caused by a bad flash.
The problem wasn't caused by a bad flash, I bought it secondhand only about 2 months old, and it's had it straight out of the box. Obviously the seller didn't know anything about it having this quirk...
I tried flashing it with the 1.19 dopod ROM (Had 1.14 nordic ROM initially), still same problem. I did a backup with pdocread, but can't make pdocwrite work, complains it can't write to the filesystem.
Since your device is obviously CID unlocked, it looks feasible to create a flashable file from your pdocread backup. Take a look at my bootloader thread, there is a link to another thread where that is covered.
I personally believe the previous owner CID unlocked your device and maybe it didn't completely work in the way it should. Please make a backup using "bkondisk" and post the IPL (128kB) and the SPL (512kB). I can check these files, perhaps the hw is not properly set up by any of these.
Isn't the IPL and SPL replaced in the standard RUU flashes?
Normally yes, but in ur case maybe it is skipped.
Why don't u dump it so we can check it.
Radio is also interesting.
Have DK ROM - will give
Drop me a mail. Then we an figure out how to get it to you.
This is the file.
ruu_vox_htc_noric_1.15.402.4_4.1.13.37_02.83.90_ship.exe
would be nice if you upload it to XDA developers FTP site
mHumle said:
Drop me a mail. Then we an figure out how to get it to you.
This is the file.
ruu_vox_htc_noric_1.15.402.4_4.1.13.37_02.83.90_ship.exe
Click to expand...
Click to collapse
Great! I've sent you a PM, can't get your email from this board
I've now flashed it back to the danish rom, and done some further testing.
I've found out that the phone boots fine with either the simcard OR the SD card inserted, but not both at the same time.
I've also found out that this problem seems to be a problem with 64k simcards, and not 32k simcards.
With a 32k simcard everything is just peachy.
Anyone got suggestions?
Edited the title to make more sense now
Seems that both 64k sim and sd cards draw too much current.
Looks like a HTC design flaw.
Did u try other sd cards?
Tried another 1gb card, they're both Kingston though. Both work fine in my P4350 / Herald.
Try with another brand and smaller sd card.
And now that you have your nordic rom back on, I'd also request service from HTC.

HARDSPL SD Flashing..any success stories?

Has anyone successfully flashed any hardspl from their sd? If so how exactly did you go about it. I know its risky (yes ive read all the wiki's) but i have no choice..one of my pins that has activesync functionality has broken off so im forced to flash through SD and i would like to update to jocky's hardspl for freezing issues...I tried all versions of jumpsl and any and all sspl's i could find and the normal sd flashing method didnt work..tried reinserting after tri color boot screen and nothing...
pazookie said:
Has anyone successfully flashed any hardspl from their sd? If so how exactly did you go about it. I know its risky (yes ive read all the wiki's) but i have no choice..one of my pins that has activesync functionality has broken off so im forced to flash through SD and i would like to update to jocky's hardspl for freezing issues...I tried all versions of jumpsl and any and all sspl's i could find and the normal sd flashing method didnt work..tried reinserting after tri color boot screen and nothing...
Click to expand...
Click to collapse
i'm pretty darn positive we decided that this will not work, i cannot see any way that you could get it to work since we have to have the SD card removed in order to get hard SPL on there, and the only way to flash via SD is to have it in. you might wanna try a different usb cable if you haven't already, otherwise if it is the port on the phone then you should flash the stock rom onto the phone via sd card and then return the device for warranty replacement. i have returned my phone to att with HardSPL on it and they didn't notice

RUU error (262) update error

Hello guys...
Iam not new, and i have already flashed my first(it was wasted not by my fault)KAISER, it was one year ago and i did it with HARDSLPv1, and lately added some new roms cooked by sakajati(respect)...
Yesterday i bought new one(but one year old) so i tried to flash him as well, i have used HARDSPL 1.93, and then i tried to put Sakajati"s 4th feb ROM, but i come across one big trouble, everytime i try to put it on i encounter the same RUU error:
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process. Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue. Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.
what to do...????
i am very afraid that i destroyed my Kaiser...???
what it means that Wince is destroyed...
Please help me, i am desperate...
Iam not new,
Click to expand...
Click to collapse
But the solution could be found here (search)
If you see the tri color screen everythng is ok, just win mobile is destroyed. Try to flash a rom from your sd card
Thank you very much...
I hope it will work, i really did search for about an hour and tried to put rom on sevral times, but i didnt find nothing 100% secure, i dont want to indanger the unit any more that i did...
thanks again, i will try it tommorow morning at my job, thats where my SD card is...
)))
greganovak said:
Thank you very much...
I hope it will work, i really did search for about an hour and tried to put rom on sevral times, but i didnt find nothing 100% secure, i dont want to indanger the unit any more that i did...
thanks again, i will try it tommorow morning at my job, thats where my SD card is...
)))
Click to expand...
Click to collapse
Part of the problem is that 1.93 is a jump spl and should be used to upgrade to Hard spl 3.29 or 3.56, not as an spl on its own. You need to run jump spl 1.93 from your device and make sure you are connected to your computer, when you see the bootloader you need to unplug your USB, count to 10 and plug your USB back in then flash a hard spl to your phone! Again 1.93 is not a Hard Spl by itself, it is only a middle man to flash a Hard Spl.
I think the best would be to flash a stock rom at first, cause therefore you don't need an other bootloader. Then flash Hardspl (3.29 if you have a kaiser or 3.56 if you have a tilt) and then flash any rom you want
i obviusly have a lot to learn, mate how do I asses if I have TILT or KAISER, what is the main difference...
[email protected]: i have already DL the stock rom before i posted the tread, i hoped on that resolution if there were no answer...
in about 10 hours from now i will get my hands on my tilt/kaiser and hope to arranged the mess i done; I drop by in any case at that time and notify you about condition and my successes...
p.s.:sorry for my poor english...
greganovak said:
i obviusly have a lot to learn, mate how do I asses if I have TILT or KAISER, what is the main difference...
[email protected]: i have already DL the stock rom before i posted the tread, i hoped on that resolution if there were no answer...
in about 10 hours from now i will get my hands on my tilt/kaiser and hope to arranged the mess i done; I drop by in any case at that time and notify you about condition and my successes...
p.s.:sorry for my poor english...
Click to expand...
Click to collapse
It realy doesnt make that much of a difference, I have a tilt and I use 3.29 and I would recomend it to anyone over 3.56 so flash either one, they will both work! And your english is great so no need to say sorry!
greganovak said:
i obviusly have a lot to learn, mate how do I asses if I have TILT or KAISER, what is the main difference...
[email protected]: i have already DL the stock rom before i posted the tread, i hoped on that resolution if there were no answer...
in about 10 hours from now i will get my hands on my tilt/kaiser and hope to arranged the mess i done; I drop by in any case at that time and notify you about condition and my successes...
p.s.:sorry for my poor english...
Click to expand...
Click to collapse
A Tilt is a At$T branded Kaiser, a TyNT II is a HTC branded Kaiser. Tilt has a different keyboard and OEM rom., only differences. People say use 3.56 if you have a Tilt because that is an AT$T Spl, but I use 3.29 on My Tilt and it works great so it doesn't really matter.
hey...
nothing seems to work...
I have tried to put default rom dl from here: http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs but the problem is that it is not bootable from SD, that has to be because the USB conection isnt on (i selected the 3.34.721.2) so i given up that way
Then i flashed the HARD spl 3.29(have kaiser) via SD steb by step first with this instruction: http://forum.xda-developers.com/showthread.php?t=433835; and it dint go through
so i tried with this instruction: http://forum.xda-developers.com/showthread.php?t=420683
it didnt work either, they are the same I know(noticed later);
So problem is that i stuck at WHITE screen that says "LOADING..."
nothig else...???
finally i manage to load/boot the htc rom from xda-wiki site, but i have to chose another one
I have tried to put default rom dl from here: http://wiki.xda-developers.com/index...me=Kaiser_ROMs but the problem is that it is not bootable from SD, that has to be because the USB conection isnt on (i selected the 3.34.721.2) so i given up that way
Click to expand...
Click to collapse
Hey man, nice to see that your device rewakes, you can flash every rom from sd card, simply rename the nbh file to kaisimg.nbh than restart into bootloader and it will automatically take the one from the card
Unfortanly, althought i would like you to be right, you are not. When i tried to do it via SD, i stuck at white screen saying LOADING...(blue) and nothih further... and i tried also the Cmonex_s Hard SPL3.29_SD which also stucks at same screen
So now (after updatig with default rom) that i have basicly normal working device i startet from the top. Using @mskip"[email protected] tutorial called: Flasing your first rom (for noobs); it all goes well, till i start to update RUU(sakajati 4 feb) if it matters, and i tried both (spls 1.56 and 1.93), it stops updatig at 17% and notrhin else then works just puting back the HTC default rom from wikiXDA side(thank god for that)
i am thinking of MTTY, although i dont know what it does guys here almoste all say it fix bad rom flash, but i am not sure if thats my main problem, i rahter think it has something with spls...
if someone has some good advice i will be very grateful...
greganovak said:
Unfortanly, althought i would like you to be right, you are not. When i tried to do it via SD, i stuck at white screen saying LOADING...(blue) and nothih further... and i tried also the Cmonex_s Hard SPL3.29_SD which also stucks at same screen
So now (after updatig with default rom) that i have basicly normal working device i startet from the top. Using @mskip"[email protected] tutorial called: Flasing your first rom (for noobs); it all goes well, till i start to update RUU(sakajati 4 feb) if it matters, and i tried both (spls 1.56 and 1.93), it stops updatig at 17% and notrhin else then works just puting back the HTC default rom from wikiXDA side(thank god for that)
i am thinking of MTTY, although i dont know what it does guys here almoste all say it fix bad rom flash, but i am not sure if thats my main problem, i rahter think it has something with spls...
if someone has some good advice i will be very grateful...
Click to expand...
Click to collapse
Hi,
I couldn´t flash my Kaiser via SD at the first time and tried something that worked.
The SD´s are formatted in Fat16 usually, try to format to Fat32... It seems like a stupid thing, but worked for me.
Reagards and good luck.
SD must be formated FAT32, to work, also I sugest a smal card, 512 or something like that, SHDC usual doesn't work
I have 1GB SD and its not shdc, so thats ok.and i have done it right now, like you two guys said so i formated it with FAT32 but still no succes.
I guess that this tree lines in red/green/blue screen arent right:
KAIS130
SPL-3.02.0000
CPLD-8
i thing this SPL has to da something to do with all this mess a have done
I have flashed a couple of roms( i had three devices) and i flashed a few for my friends and all was OK till now, and i dont know what else to do...
greganovak said:
I have 1GB SD and its not shdc, so thats ok.and i have done it right now, like you two guys said so i formated it with FAT32 but still no succes.
I guess that this tree lines in red/green/blue screen arent right:
KAIS130
SPL-3.02.0000
CPLD-8
i thing this SPL has to da something to do with all this mess a have done
I have flashed a couple of roms( i had three devices) and i flashed a few for my friends and all was OK till now, and i dont know what else to do...
Click to expand...
Click to collapse
Yes, you still have a stock spl on there. It needs to be hard spl'd before you flash anymore. Check out the stickies at the top of the forum.
hi again...
Well, I respect the "rules" of forum, thats why i wouldnt ask for insructions that are already written(thanks for the authors) with that i mean stickys, because i read them, almost all...
But I still tried once again, and I came across the same thing, i stuck at 17% when loading RUU or if i choose the VIA SD i stuck at white screen with blue text saying (LOADING...)...
nothing else helps than loading the dafault ROM by HTC... as i already said once again...
if i manage to solve the problem i will be in touch; what do you thing about MTTY
Edit 1:
i have done everything as it says in the instruction, and just like some of you "replyed" me...
but i always stuck at 17%when loading RUU, when i flash it with SPL 1.56 or 1.93 i never get stuck at white screen it always apeare the mentioned SPLs nimbers and some other text in yellow but when i then load RUUs i stuck at excatly 17% nothing less nothing more
edit 2:
yupi....yupi
i made it...
http://forum.xda-developers.com/showthread.php?t=354061 here is my lifesavior...
those instruction were the one that helped my problem...
it is very nice to ba a part of this community....

Possible brick issue HELP PLEASE

Hey GUys,
I'm not new to flashing and roms and all that jazz. Had the random stuck in bootloader that wouldn't resolve itself today (using 3.29) Loaded kaisdiagsd.nbh and flashed stock att rom. (probably should have gone right for the spl patch but I was frustrated and needed my phone) Boot loader is now v3.65
Flashed rine, reboot, same issue. Phone will now only load the stock 6.1 att rom from the micro sd. kaisdiagsd.nbh is stuck on loading as for all other roms. I can occassionally get the os to load using mtty. From there tried jumpspl and it would not connect via usb at all.
When in the stock 6.1 os I get the old unrecognized usb device in both xp and vista.
Is there anything else I can do to reflash spl? All i can think of is trying the task 2a, wiping everything and trying to flash from diag but I don't even want to try that route without something solid in place.
The phone is 2 years old, upgrading when the touch pro 2 hits att in aug sept or whenever, but I need my phone.
I have gone through many many many posts. I'm stuck. Any help would be appreciated.
Is there anything else I can do to flash a n
Have you tried to flash the SPL from the SD card? Worth a shot if not.
thanks for getting back, i have tried..multiple. It will just sit on loading as for everything except that damn att rom. i've been going at this for hours and hours. just to make sure, the spl flash will still be named KAISIMG.nbh correct? or has my frustration gotten to me
Yes but make sure you dont put the .nbh. Just kaisimg or it will be kaisimg.nbh.nbh and wont work
haha, yeap. i'm an i.t guy so i have file extensions showing by default so thats golden
I have the stock att rom up and running so the phone is functional, but that said, its the ****y att rom and I'd really like to change that asap., I'm just tired and fed up at this point really
Also for flashing SPL from SD card you need kaisdiag.nbh. Place it on the SD too. I should have told you that first. Its in my 4shared if you dont have it.
just tried it. it is stuck on the loading screen....
Try reading from here: http://forum.xda-developers.com/showthread.php?t=433835
Ta
Dave

[Q]Fuze undetected on any PC, just charges

I am in deep trouble here and could really use some help please. My ATT Fuze is not being detected by any PC and i have tried everything from different wires to changing everything on the fuze it self. Now my only option is to exchange it but i don't have the original OS because i am using NRGs Rom and hard SPL it about 4 months ago. Now to my question, is there anyway i can revert it to stock ROM and SPL with micro sdhc card? I need some steps please because i cant find a way to do it. Would i have to change the OS and the SPL to return if there is anyway please let me know.
darkreborn said:
I am in deep trouble here and could really use some help please. My ATT Fuze is not being detected by any PC and i have tried everything from different wires to changing everything on the fuze it self. Now my only option is to exchange it but i don't have the original OS because i am using NRGs Rom and hard SPL it about 4 months ago. Now to my question, is there anyway i can revert it to stock ROM and SPL with micro sdhc card? I need some steps please because i cant find a way to do it. Would i have to change the OS and the SPL to return if there is anyway please let me know.
Click to expand...
Click to collapse
First, what OS are you running on your PC.
Second, have you disabled/Enabled "enable faster data" in Settings/Connections/USB to PC?
Third, Have you deleted the partnership and tried to reestablish it?
Doesn't seem to be a warranty issue.
Fuze Reply
First of all thanks for your reply.
I have tried it on 4 different computer but unfortunately same result on vista and XP, on my phone i am using NRG july version rom.
I have disabled and enabled faster data in but doesn't seem to matter.
I tried everything, i reinstalled windows mobile device but doesn't seem to matter. When i ended the partnership it wasnt being detected after it or before it.
Cant i exchange it because its a faulty phone? Also can u please tell me if i can revert it to att stock rom and spl with a micro sdcard because i am going to buy a card reader. I really don't want to toss this phone and waste all that money please help!
darkreborn said:
First of all thanks for your reply.
I have tried it on 4 different computer but unfortunately same result on vista and XP, on my phone i am using NRG july version rom.
I have disabled and enabled faster data in but doesn't seem to matter.
I tried everything, i reinstalled windows mobile device but doesn't seem to matter. When i ended the partnership it wasnt being detected after it or before it.
Cant i exchange it because its a faulty phone? Also can u please tell me if i can revert it to att stock rom and spl with a micro sdcard because i am going to buy a card reader. I really don't want to toss this phone and waste all that money please help!
Click to expand...
Click to collapse
Yes, you can revert via SD card.
Do Radio and ROM first, then do stock SPL last.
Rename each RAPHIMG.NBH (one at a time) on a FAT32 formated card 2gb or smaller.
Go into bootloader mode and it should flash from there.
I would test your USB connection after you flash back to stock ROM before you flash the stock SPL to see if it may have fixed your issue.
Huh
Thanks a lot man!
Now the hard part , why do u say a card 2gb or smaller?
So i can revort the SPL with a micro sdhc card also? can u tell me where i can find this stuff, i am really sorry for the trouble and would really appreciate it if you can tell me step by step because i am a noob
Hopefully ATT exchange it for the usb issues , gotta check with them after this. Thanks
darkreborn said:
Thanks a lot man!
Now the hard part , why do u say a card 2gb or smaller?
So i can revort the SPL with a micro sdhc card also? can u tell me where i can find this stuff, i am really sorry for the trouble and would really appreciate it if you can tell me step by step because i am a noob
Hopefully ATT exchange it for the usb issues , gotta check with them after this. Thanks
Click to expand...
Click to collapse
I've heard that anything over 2 gb will cause an issue but I have done it from an 8gb card.
Start here for issues encountered.
Basically once you find your ROM Radio and SPL, extract the files so you can see the .NBH files for each.
1. Take the ROM file and rename it "RAPHIMG.nbh " without quotes.
2. Place it in the root of your storage card and enter bootloader mode (Volume Down + Reset), the phone will read the image file and begin to load it.
Do this for each file but wait until the first file has loaded.
Radio.nbh will be renamed to RAPHIMG.nbh
SPL.nbh will be renamed RAPHIMG.nbh
As one is done loading, remove it from starage card and put the next one on and repeat step 2.
Another thread regarding SPL.
I hope this helps you and sorry I don't have the time to walk you through it.
Just read first then you'll know what to expect.
Bruce Inman said:
I've heard that anything over 2 gb will cause an issue but I have done it from an 8gb card.
Click to expand...
Click to collapse
my best guess is just in case the bootloader doesn't have drivers for SDHC cards... my x51v has drivers for SDHC in WM, but flashing requires SD cards because the bootloader doesn't read SDHC
revert SPL or no?
Hey thanks bruce!
One more question, should i revert the SPL even tho i changed the radio and os. When i go to ROM version it says 1.95 but is that the SPL? Also you think ATT will take the phone back with the phone not syncing reason or do i have to make up some other stuff up? O btw the 8gb kingston card worked fine for reverting it and it still doesnt detect the phone
darkreborn said:
Hey thanks bruce!
One more question, should i revert the SPL even tho i changed the radio and os. When i go to ROM version it says 1.95 but is that the SPL? Also you think ATT will take the phone back with the phone not syncing reason or do i have to make up some other stuff up? O btw the 8gb kingston card worked fine for reverting it and it still doesnt detect the phone
Click to expand...
Click to collapse
To be safe I would revert the SPL as well.
The 1.95 is the ROM build base.
You want to revert back to stock SPL 1.90.
I can't second guess what AT&T will cover or not but you may want to "further your cause"....
Best of luck!!!
in my experience (my UK t-mob vario is back at repair right now) - DONT revert the SPL if you cant do it from the USB.
Obvisously you have a different setup to me, but when i tried to revert my phone to stock for exactly the same fault (no usb sync, regardless of pc or cable / phone rom, state etc etc) i managed to get the phone to refuse to boot due to a spl / rom difference. As i couldnt load from usb - i couldnt flash anything new, and as i had managed to overwrite hard spl - i couldnt flash what i wanted from the SD card! (if i could get the usb to work, i could fix it all - but as that was the problem i had to send it off fubar)
For some reason (god knows why!) it appears that t-mob are repairing my phone under warrenty despite the spl error but i wouldnt advise getting yourself in the same situation, as i was 100% expecting it to come straight back to me!
My personal advice is send it off with the correct rom, radio & splash screens (and remove security unlock if required) so the phone looks stock - the only difference will be the spl version. They probably wont notice!
1.90 or 1.95
Thx for the info guys, my new phone is coming and it took me about 2 to finally on its way. About the SPL, mine says 1.90 and that was when i first did the hard spl to change roms. What is the stock SPL 1.90 or 1.95? at loading it hows me 1.90 olinex i think...also i can change it if needed with my 8gb sdhc card or no?
I had a problem with my PC not detecting my fuze a few weeks ago. I found out it was my new firewall blocking the connection. I disabled the firewall and it worked like normal.
If it were me i would try to connect again after you flash the stock rom. If there was something wrong with the usb it still wont work. If it connects to activesync the maybe it was your ROM, or something else.
Just a suggestion

Categories

Resources