Related
If anyone is interested in getting Blackberry Connect working on their Hermes / Tytn / etc, take a look at:
http://www.sems.org/entry.asp?ENTRY_ID=162
It works nicely... I tested it with both BES and BIS.
would love to try this out, but the second link doesnt work.
They must have changed the link. I'll dig up the page I found it from.
It looks like they are temporarily putting the files to the link I put up. I updated the post, go to:
http://support.vodafone.de/index_l3_2z.html and download it under VPA Compact II, Desktop Manager 2.1 für VPA compact II (13,7 MB), it is the same thing.
Thanks for the link. One more thing, will this only work on vodafone, or can I use it on TMO in the U.S.?
I tried to use it for Cingular but it says Blocked - Radio in use. Any suggestions?
I tried to use it on T-mo usa. It registered fine and t-mo saw the new pin, but T-Mo won't let me change my handheld. I've been running into this trouble recently with T-Mo. I'm guessing they are blocking all non-blackberry devices or not authorized by T-mo USA to register on their network.
Ok got it setup but I get a conflict from my phone trying to connect to wap.cingular and when signed on I dont get my e-mails throuhg balckberry.net.
Is there any way that both can coexist on this phone happily?
Can anyone confirm the Vodafone Blackberry solution works for Tytn ? Tmobile USA with BES server? That's the only condition that I will go with Tytn. Thanks.
Can anyone confirm the Vodafone Blackberry solution works for Tytn ? Tmobile USA with BES server? That's the only condition that I will go with Tytn. Thanks.
BBC and Cingular Conflict
decepticon said:
Ok got it setup but I get a conflict from my phone trying to connect to wap.cingular and when signed on I dont get my e-mails throuhg balckberry.net.
Is there any way that both can coexist on this phone happily?
Click to expand...
Click to collapse
Did you figure out how to run BBC with the TyTn? I am new to the TyTn and I have the "Blocked - Radio in Use" problem. My UTMS symbol does show something is continuously connecting to network, but so far I cannot find the program.
Thanks in advance
Kevin
kwsmith6 said:
Did you figure out how to run BBC with the TyTn? I am new to the TyTn and I have the "Blocked - Radio in Use" problem. My UTMS symbol does show something is continuously connecting to network, but so far I cannot find the program.
Thanks in advance
Kevin
Click to expand...
Click to collapse
Change the Band to GSM only. BB Connect does not work over UMTS (..yet).
I have BB connect working fine via UMTS and GPRS - I dont have a strong enough signal at my house to get UMTS / 3G, but when I get closer to town the TyTn automatically switches to UMTS / 3G and BB still works fine.
I am using a HTC Rom with a Vodafone blackberry enabled account and synced to the BlackBerry Exchange server
If it says Radio in use that mean that you probably have another program that's actively using the gprs connection (i.e. Direct Push)
I'm also using the tytn with a Tmobile US sim.
I dont know what you guys are talking about when you say you get a "New Pin detected" Message.
When I go to BB Webclient through tmobile.com, it shows my old pin number in there. And I cant change it.
Do you actually have to setup a webclient account, or it's supposed to work as long as you are provisioned for blackberry.net?
Blackberry Coonect Spv 3100
Hi there I have a SPV 3100 with a WM6 cooked Rome. Has anyone managed to get Blackerry connect to work with orange uk
Manythanks
steven
Blackberry Connect
Hi there,
has anyone managed to activate the blackberry connect on the orange spv m3100.
i have contacted orange they say they dont support it but they have activated the blackberry apn on the account.
i know some people have managed to do it any help appreciated.
someone said that due to rim checking imei and network if network does not support they stop the connection. does any one know
i want to use it with BIS
many thanks
steven
BlackBerry Connect 4 for Hermes/TyTN: .CAB file anyone?
Hey - anyone have a .cab file of BBConnect 4 for Hermes/TyTN? I am on a corporate PC that does not run Windows installers (paranoid IT guys).
siros said:
Hey - anyone have a .cab file of BBConnect 4 for Hermes/TyTN? I am on a corporate PC that does not run Windows installers (paranoid IT guys).
Click to expand...
Click to collapse
http://www.sems.org/entry.asp?ENTRY_ID=248
BBConnect + ActiveSync Direct Push coexistence
Hi -
I've got BBConnect v4.x on a Tilt/Tytn II, partly coexisting with ActiveSync Direct Push. This is using a T-Mobile SIM, subscribed to the BlackBerry Enterprise plan (unlimited data, plus access to BES gateway).
I say "partly coexisting" because typically either ActiveSync is getting direct push of new items or BBConnect is actually connected to the company BES. When ActiveSync is "winning", BBconnect typically shows "blocked" (and may say "radio in use"). When BBconnect is "winning", the phone will report that it can't "dial" its data connection.
But sometimes both are working simultaneously...
What is the magic incantation so that they will start up in the right order and both work at the same time?
Many thanks,
Jay
I am using Dutty's Rom latest version and I have a problem with ATT Tilt. when i am on ISP 3G service, and i try to connect to skype, it says no Wifi and tries to connect to Media Net instead of the existing 3G connection. Then it says couldnt connect and the skype is not connected.
Can anyone help me out of this? Coz i have skype out account and wanted to use it for out going calls instead of ATT network.
Great Job Dutty... your ROM is the best one i have used... i was having 8525 and upgraded to tilt.. got it few days ago..
Thanks in Advance....
sorry for double posting.. new on this forum...
Hello all,
Recent owner, second-time poster!
I am having two connection specific issues that I am hoping to get a clear answer on.
First I cannot make HTC Home 1.5 (Emu's build) connect to the weather server with the T mobile 216.155.165.50:8080 proxy port open. Is there a workaround available for this? Interestingly, it works just fine to update over active sync!
The related question, an active sync one, is that pIE will not connect to the web when I am sync'ed up, even though its apparent that HTC Home Weather can! PIE works fine over GPRS (T-Mobile $6 plan) or WiFi.
I have already trolled around in the registry looking for a weather-related IP or proxy setting. There are obvious settings for location, but not for anything connection related.
I am running Jaguar 4.0b with HTC Home 1.5 and Home customizer Beta5. I purchased and installed the whole SK Toolkit (great program, worth the money). I also have more player and Voice Dialer.
This is my first ever smart phone, and I am trying to learn quickly. Thanks, all!
I'm having a similar problem with HTC Home weather and my t-mobile GPRS connection. I'm running XDA Mobile 6 R5 though. Everything works fine over WiFi but not with GPRS. Internet Explorer works over GPRS but drags its knuckles when connecting, it takes a few minutes once the connection is initiated. I've tried both settings for T-mobile data and neither works real well.
Shane
I have a familiar issue with Orange. All works fine except the weather update using Orange World GPRS.
Where can I change the connection that HTC Home uses to get the weather info???
I just got the T-Zones plan for $5.99/month and put in the proxy settings with the 8080 port for connections, Internet explorer works fine (but slow obviously), but no other program that uses the internet seems to work.. maybe its the settings? maybe the program has to use the proxy as well? any thoughts?
I believe the weather program may be timing out too fast. Dunno weather it's a registry entry or what that changes the settings for it. Or if it's even changable. Everything else works great over GPRS just not HTC Home Weather. Although it works fine over WiFi.
Shane
anyone ever have any luck with the weather downloading over proxy?
i have never been able to have the weather update from the tmobile proxy, I think it has something to do with some blocked port or something of the sort. I have looked for months for a workaround, only solution is to upgrade from the 5.99 plan to the full internet plan and it will work, but that wont happen everything connects fine except htc weather and some other application i had on my wizaed cant remember right now.
if you guys did some homework and did a search of the forums for specifically: htc home proxy, you would find the htc home proxy patch which lets you do exactly what your asking
thanks i found it and it works
http://forum.xda-developers.com/showthread.php?t=371591
How did you fix it? Please let me know.
Thanks
daishi17 said:
thanks i found it and it works
http://forum.xda-developers.com/showthread.php?t=371591
Click to expand...
Click to collapse
the fix is easy. remove that old proxy and change your wap to epc.tmobile.com.
Hello everyone,
Got my Touch Pro yesterday, first impressions were good but I just realised that there is no way to get my exchange to sync through 3G (or even GPRS).
I'm with 1and1, my parameters are fine (they work on my Vario III with the same SIM card). I'm with T-mobile (I know the 3G reception is not good on the TP, I had to switch to 2G to avoid getting cut off during a call, but I get 4 bars from my desk in a loft, so that shouldn't be a problem!).
I tried the default t-mobile parameters setup by the touch, and I tried to configure the connection manually with the parameters that work well with my Vario III:
APN: general.t-mobile.uk
User name: user or nothing (instead of T-mobile)
Password: pass or nothing
Still a no go. I get the same error message:
Activesync cannot reach the server. Check that the server address and proxy server settings are correct.
Support code: 0x80072F78
I've called 1and1 and they say they support WinMo6.1.
Anyone with T-mobile able to sync an exchange account on 3G/GPRS?
Would you mind sharing parameters?
I could live with the Touch Pro with 2G until they release a better rom/radio, but I can't live without push email/exchange!
By the way, there is no problem with the server itself or the exchange parameters, it synchronizes fine on wifi, so it looks like it's a touch pro (works on Vario III), winmo6.1 (works on Winmo 6.0) or t-mobile (works on wifi) issue!
Thanks for your help!
PS: before you ask, I did a hard reset to make sure there is no problem with third party software, this is after a hard reset...
Manni01 said:
Hello everyone,
Got my Touch Pro yesterday, first impressions were good but I just realised that there is no way to get my exchange to sync through 3G (or even GPRS).
I'm with 1and1, my parameters are fine (they work on my Vario III with the same SIM card). I'm with T-mobile (I know the 3G reception is not good on the TP, I had to switch to 2G to avoid getting cut off during a call, but I get 4 bars from my desk in a loft, so that shouldn't be a problem!).
I tried the default t-mobile parameters setup by the touch, and I tried to configure the connection manually with the parameters that work well with my Vario III:
APN: general.t-mobile.uk
User name: user or nothing (instead of T-mobile)
Password: pass or nothing
Still a no go. I get the same error message:
Activesync cannot reach the server. Check that the server address and proxy server settings are correct.
Support code: 0x80072F78
I've called 1and1 and they say they support WinMo6.1.
Anyone with T-mobile able to sync an exchange account on 3G/GPRS?
Would you mind sharing parameters?
I could live with the Touch Pro with 2G until they release a better rom/radio, but I can't live without push email/exchange!
By the way, there is no problem with the server itself or the exchange parameters, it synchronizes fine on wifi, so it looks like it's a touch pro (works on Vario III), winmo6.1 (works on Winmo 6.0) or t-mobile (works on wifi) issue!
Thanks for your help!
Click to expand...
Click to collapse
Use the settings the connection manager applies automatically....untick the proxy server and you should be good to go, i also am on tmobile UK, same settings and use an exchange server. The proxy has been messing which alot of stuff recently, im sure theyve changed something on it since this happened on my Hermes aswell.
Perhaps flash the newer radio onto your Raph....update to HardSPL first then flash Radio 1.02.25.31 to your device from the wiki pages. Read everything to the letter and ul be fine.
mrvanx said:
Use the settings the connection manager applies automatically....untick the proxy server and you should be good to go, i also am on tmobile UK, same settings and use an exchange server. The proxy has been messing which alot of stuff recently, im sure theyve changed something on it since this happened on my Hermes aswell.
Perhaps flash the newer radio onto your Raph....update to HardSPL first then flash Radio 1.02.25.31 to your device from the wiki pages. Read everything to the letter and ul be fine.
Click to expand...
Click to collapse
Thank you, that was quick and efficient! Unticking the proxy did the trick (even with the manual parameters).
Manni01 said:
Thank you, that was quick and efficient! Unticking the proxy did the trick (even with the manual parameters).
Click to expand...
Click to collapse
yer its a weird problem tbh. Have you used the HSPA connection for a laptop/pc yet? fast as hell.
mrvanx said:
yer its a weird problem tbh. Have you used the HSPA connection for a laptop/pc yet? fast as hell.
Click to expand...
Click to collapse
Not yet, trying to get the basics to work first. Used to do this with my Vario III (BT PAN) and was very happy with it. I'm hoping it will be faster with the TP.
Forgive me if I'm being think, but the radio you mentionned is listed as coming form Cingular in the wiki. Will it work with UK T-mob, and will it improve the 3G reception issue?
Manni01 said:
Not yet, trying to get the basics to work first. Used to do this with my Vario III (BT PAN) and was very happy with it. I'm hoping it will be faster with the TP.
Forgive me if I'm being think, but the radio you mentionned is listed as coming form Cingular in the wiki. Will it work with UK T-mob, and will it improve the 3G reception issue?
Click to expand...
Click to collapse
Ive had some improvment with the reception yes, calls dont seem to drop as much, it works fine with tmobile.
it is possible.
Hi, I got a pro, use it on the dutch tmob netwerk, both G and H work fine with the (free) mail2web exchange service.
t-mobile uses standard proxy to bring webpages faster .. unfortionatly it doesnt map all other ports so youtube and such wont work either.. it keeps trying to connect when one plays a video. since it is not neccesary to have a proxyserver it is best practice to turn it off.
mrvanx said:
yer its a weird problem tbh. Have you used the HSPA connection for a laptop/pc yet? fast as hell.
Click to expand...
Click to collapse
Hi MrVanx!
I've tried to setup my BT Pan as usual with my Vaio TZ11, and although the pairing and setup goes fine, when I try to connect I get a "connection is denied" error. Does the BT PAN work out of the box on the TP or do you need a tweak like on the Kaiser?
Sorry I'm afraid this was a "RTFM" case...
As the internet sharing option has disappeared from the comm manager, I assumed the connection was automatic...
Of course you need to launch internet sharing and select BT PAN...
It works great, I get 400-500kbps down and 300-400kbps down, 130-140ms ping. Far from my home broadband, but still good enough.
I tried with my Vario III, I get about the same results (with 3 bars on HSDPA on Kaiser, 4 on TP).
So two questions now:
1) Do you get better performance with T-Mobile UK on the Touch Pro (I'm in Salisbury)
2) Any way to bring Internet Sharing back to comm manager?
This worked for me
Man I wasted 30mins - had already read this post before I ordered and forgotten. XDA dev is the best!
Hi,
Could you please help me to find out best SIP software for HD2. I got PortSIP for my HTC HD2. It;s working very well on wifi connection. But not working at all on t-mobile UK 3g network. I get registration failed error. I just realised that PortSIP doesn't initiate the data connection at all. SO getting same message even though not connected to internet. My voip provider is actionvoip.
Any suggestions....
yes portsip does not initiate the 3G/data connection. But there is a work around. Open a web browser or any application that uses data and after connection has been established start portsip then it registers successfully.
I use Actionvoip on 3G without any problems.
diamondX04HT said:
yes portsip does not initiate the 3G/data connection. But there is a work around. Open a web browser or any application that uses data and after connection has been established start portsip then it registers successfully.
I use Actionvoip on 3G without any problems.
Click to expand...
Click to collapse
Hi,
I tried same, But no success. On which network you are.. I am on t-mobile UK and i found following link (https://www.t-mobile.co.uk/shop/terms-and-conditions/combi/) in which thay have mentioned that
<b>
"you can't use your phone as a modem or use internet Plus for peer to peer file sharing, or making internet phone calls. *[Internet] Plus comes with a fair use policy of 3GB a month."</b>
So I am wondering wheather T-mobile is blocking my access to use any SIP software. Although i can use skype mobile on t-mobile.
pda_crazy said:
Hi,
I tried same, But no success. On which network you are.. I am on t-mobile UK and i found following link (https://www.t-mobile.co.uk/shop/terms-and-conditions/combi/) in which thay have mentioned that
<b>
"you can't use your phone as a modem or use internet Plus for peer to peer file sharing, or making internet phone calls. *[Internet] Plus comes with a fair use policy of 3GB a month."</b>
So I am wondering wheather T-mobile is blocking my access to use any SIP software. Although i can use skype mobile on t-mobile.
Click to expand...
Click to collapse
I am on softbank in Japan
Skype is no SIP-software.
VoIP might also be blocked by your VoIP-provider. I use VoIP for my company and we had the problem that we could only sign in from the provider's own network. They didn't allow external connections to their VoIP-servers.
After we had some discussions on the matter we received a workaround, so we can use VoIP from anywhere in the world and customers can call us on the same number, where-ever we are
don't worry
try FRING for windows mobile.. its supported SIP .. WORK PERFECT
NIMBUZZ
Try nimbuzz messenger.
Maybe this one WVGA VoIP software with earpiece, HTC favorites import, dtmf support