Database Info

at&t rom 1.62.502.0 internet problame!!!

hi all
im new here many thanks for that amazing group here.
i have yesterday upgraded my rom of my at&t tilt (kaiser tytn ii) to the new version, well all looks ok BUT...
since then i cant get internet connection and mms messages.
i have checked it the whole day today with my network company (im in israel) and we have reconfigured the modem connections but nothing its dead.
before i have done the upgrade all was just ok since yesterday its no connection.
i have checked arround and i found that there are many users that have the same problame all around the world.
since any mms message goes thru internet (etc. gprs,edge,hsdpa) i assume that the problame is with the internet connection and that blocks the mms messages.
my cell company told me that as she sees all is ok and i remember my settings too.
also even when i connect my tilt with usb to my computer i cant go on the web bacause it says "no connection".
i assume that they have planted in the registery any value that blocks any internet connection (as gprs etc.) if its not thru the own supllier, i can understand also why but the fact is that i get hspda connection and i see the icon of "connected" but somthing blocks it !!!!!
is there a way how we can digg in and remove that block that dosent allow the internert?????
is there a way to bypass it ????
or maybe i should go back to my old ROM is that possible????
again i remind u that:
1) all worked excellent till yesterday
2) the HSDPA establishes a connection but the explorer is dead.
3) i cant even connect thru my pc with usb while my pc is fully connected via dsl to the internet.
4) all setting are same and at once its "no connection"?
5) i see that meny users have that problame
if there is any way let me know
also how bad and ugly will it be if i go back to my old ROM and how do i do it.
many thanks

tachat.....
run again the remove hidden proxy cab.

what do u mean "hidden proxy"
i never had any hidden proxy before why should i have them now??
how do i find them?
how do i remove them??
thanks
tuches

tuches said:
i never had any hidden proxy before why should i have them now??
[/b]how do i find them?[/b]
how do i remove them??
thanks
tuches
Click to expand...
Click to collapse
by searching removeHiddenProxy4CWS_1219.cab

Where did you download the rom from???
I know the one at HTC America is intended & configured for AT&T customer in North America. If a ROM was not released on your local AT&T or HTC site, that may contribute to your issues.
You may want to DL the network configuration wizard & give it a go at reconfiguring your device.

some good news
hi all
many thanks for visniak you were right.
it was some hidden silly proxy that i needed to kick out.
now the internet works great BUT i cant send MMs messages.
the configuratins are all ok (i checked it today with my network company)
they say that thats a ROM problame (means that this might be a problame because i upgraded it to ROM 1.62)
is that right???
is there a solution???
many thanks

it's like BEZEQ and BEZEQINT
each blaming the other.............
I don't use MMS.
But most likely your settings are incorrect.

Does the new AT&T ROM solve the Low Volume when using Bluetooth?
That is the only iserious issue I have with the Tilt.

I have been a Symbian user forever and the AT&T Tilt(Unlocked and using it on another service provider in India) is my first exposure to Windows mobile. I upgraded to the new AT&T Rom(1.62.502.0) and the low bluetooth volume issue is sorted out...I'm using the SE 970 stereo BT headset, which is working fine.(ADVANCE that should solve ur query)
My only issue now is that i am unable to use the Internet Explorer thru GPRS. Strangely i could configure and download my E mails thru Outlook. Also, when I Sync the Tilt with my PC, IE works fine using the net connection from the PC. Any insight/clues why I'm facing this issue?

Connect through WiFi or 3G

Hai.
First of all I'm very happy with my HTC Touch Pro UK. Before this I used a TyTN II, also a very nice device.
With the Touch pro a have a little problem when retrieving email through IMAP. On the TyTN II the email was retrieved through WiFi if there was a WiFi connection and through 3G when there wasn't.
For Outlook (ActiveSync) on the Touch Pro this works fine, but for IMAP connections, it only wants to connect through 3G, whatever I set in the Advanced Server Settings of the IMAP account. When I choose Vodafone GPRS it connects through 3G, also when there is a WiFi connection active.
Can this behaviour be altered ?
Hope anybody has a solution for this.
Greenthings,
Martijn

Lion69 said:
Hai.
First of all I'm very happy with my HTC Touch Pro UK. Before this I used a TyTN II, also a very nice device.
With the Touch pro a have a little problem when retrieving email through IMAP. On the TyTN II the email was retrieved through WiFi if there was a WiFi connection and through 3G when there wasn't.
For Outlook (ActiveSync) on the Touch Pro this works fine, but for IMAP connections, it only wants to connect through 3G, whatever I set in the Advanced Server Settings of the IMAP account. When I choose Vodafone GPRS it connects through 3G, also when there is a WiFi connection active.
Can this behaviour be altered ?
Hope anybody has a solution for this.
Greenthings,
Martijn
Click to expand...
Click to collapse
Coming from the Kaiser you should know there are ALWAYS certain issues which later on are solved dude
Give it time and we shall have some more ROMs for your device .

mrvanx said:
Coming from the Kaiser you should know there are ALWAYS certain issues which later on are solved dude
Give it time and we shall have some more ROMs for your device .
Click to expand...
Click to collapse
I wasn't aware that this was a ROM issue. On the TyTN II it was working with the default ROM. I hoped it was just a setting somewhere...
I'll wait for some more tweaks or a new ROM..

I've got the same problem with hotmail using windows live. It always connects via GPRS rather than use the available WiFi. I have found that if the wifi is turned on before soft resetting the device - ie it then starts up with wifi on, i can sync via the wifi connection until the wifi connection is turned off and then it always defaults back to GPRS.

Hmm, I would advise (since i havent got a device here yet to test...will do tomorrow) that you go through the wifi settings and make sure it is set to access "the internet" and not "workplace" or anything else??
Helping out would be so much easier if it was sat right infornt of me...will be soon

mrvanx said:
Hmm, I would advise (since i havent got a device here yet to test...will do tomorrow) that you go through the wifi settings and make sure it is set to access "the internet" and not "workplace" or anything else??
Helping out would be so much easier if it was sat right infornt of me...will be soon
Click to expand...
Click to collapse
I can wait 'till tomorrow.. No problem.. ;-)

Already done that and selected Internet under Wifi. All other programs connect correctly to WiFi ie, Opera Mobile, Opera Mini, GPS Update etc.... its just email that gets it wrong.

ardsar said:
Already done that and selected Internet under Wifi. All other programs connect correctly to WiFi ie, Opera Mobile, Opera Mini, GPS Update etc.... its just email that gets it wrong.
Click to expand...
Click to collapse
Tried the same and results are also the same.

Did anybody find a fix for this ?

Do a search for Modaco nodata. It should allow you to disable the regular 3G data connection, which should (hopefully) force the phone to use wlan if you have a working connection.

This is a fix that really needs to be sorted. If wifi is working, leave 3G alone!
Damn thing is costing me money! I'm not a on a data plan, so it costs a lot more than if I was.
I didn't take a data plan, because everywhere I go, I have access to wifi!
I shouldn't have to disable 3G!
Can't it be done automatically? If wifi has an active connection, don't use 3G/HSPA. Since there is already the nodata program, all it needs is changed to be auto. And yes, I use the word "all" very loosely, I don't know how to code for mobiles!

flinx1 said:
Do a search for Modaco nodata. It should allow you to disable the regular 3G data connection, which should (hopefully) force the phone to use wlan if you have a working connection.
Click to expand...
Click to collapse
I already tried this, doesn't work. Connection times out.

I used to have this issue until i switched my settings to "the internet" and not work. did u change both the settings for the wifi card AND the settings for the access point? (not sure if that was what made the difference, but now everything is going through wifi for me.

y2whisper said:
I used to have this issue until i switched my settings to "the internet" and not work. did u change both the settings for the wifi card AND the settings for the access point? (not sure if that was what made the difference, but now everything is going through wifi for me.
Click to expand...
Click to collapse
This is part of the solution IMHO. IMAP now connects through wifi when there is a wifi connection available, but it doesn't fallback to GPRS/3G when wifi is not available.
Any other fantastic ideas ?

Nice fixed one problem, created a new one, this I can't reproduce since my email isn't imap. For everything else if there is no wifi it will connect to edge.
anybody out there with an IMAP email account with the same issue?

y2whisper said:
Nice fixed one problem, created a new one, this I can't reproduce since my email isn't imap. For everything else if there is no wifi it will connect to edge.
anybody out there with an IMAP email account with the same issue?
Click to expand...
Click to collapse
What do you use for email ? POP3 ?

Touch Pro + Exchange + 3G + T-mob = No Go

Hello everyone,
Got my Touch Pro yesterday, first impressions were good but I just realised that there is no way to get my exchange to sync through 3G (or even GPRS).
I'm with 1and1, my parameters are fine (they work on my Vario III with the same SIM card). I'm with T-mobile (I know the 3G reception is not good on the TP, I had to switch to 2G to avoid getting cut off during a call, but I get 4 bars from my desk in a loft, so that shouldn't be a problem!).
I tried the default t-mobile parameters setup by the touch, and I tried to configure the connection manually with the parameters that work well with my Vario III:
APN: general.t-mobile.uk
User name: user or nothing (instead of T-mobile)
Password: pass or nothing
Still a no go. I get the same error message:
Activesync cannot reach the server. Check that the server address and proxy server settings are correct.
Support code: 0x80072F78
I've called 1and1 and they say they support WinMo6.1.
Anyone with T-mobile able to sync an exchange account on 3G/GPRS?
Would you mind sharing parameters?
I could live with the Touch Pro with 2G until they release a better rom/radio, but I can't live without push email/exchange!
By the way, there is no problem with the server itself or the exchange parameters, it synchronizes fine on wifi, so it looks like it's a touch pro (works on Vario III), winmo6.1 (works on Winmo 6.0) or t-mobile (works on wifi) issue!
Thanks for your help!
PS: before you ask, I did a hard reset to make sure there is no problem with third party software, this is after a hard reset...

Manni01 said:
Hello everyone,
Got my Touch Pro yesterday, first impressions were good but I just realised that there is no way to get my exchange to sync through 3G (or even GPRS).
I'm with 1and1, my parameters are fine (they work on my Vario III with the same SIM card). I'm with T-mobile (I know the 3G reception is not good on the TP, I had to switch to 2G to avoid getting cut off during a call, but I get 4 bars from my desk in a loft, so that shouldn't be a problem!).
I tried the default t-mobile parameters setup by the touch, and I tried to configure the connection manually with the parameters that work well with my Vario III:
APN: general.t-mobile.uk
User name: user or nothing (instead of T-mobile)
Password: pass or nothing
Still a no go. I get the same error message:
Activesync cannot reach the server. Check that the server address and proxy server settings are correct.
Support code: 0x80072F78
I've called 1and1 and they say they support WinMo6.1.
Anyone with T-mobile able to sync an exchange account on 3G/GPRS?
Would you mind sharing parameters?
I could live with the Touch Pro with 2G until they release a better rom/radio, but I can't live without push email/exchange!
By the way, there is no problem with the server itself or the exchange parameters, it synchronizes fine on wifi, so it looks like it's a touch pro (works on Vario III), winmo6.1 (works on Winmo 6.0) or t-mobile (works on wifi) issue!
Thanks for your help!
Click to expand...
Click to collapse
Use the settings the connection manager applies automatically....untick the proxy server and you should be good to go, i also am on tmobile UK, same settings and use an exchange server. The proxy has been messing which alot of stuff recently, im sure theyve changed something on it since this happened on my Hermes aswell.
Perhaps flash the newer radio onto your Raph....update to HardSPL first then flash Radio 1.02.25.31 to your device from the wiki pages. Read everything to the letter and ul be fine.

mrvanx said:
Use the settings the connection manager applies automatically....untick the proxy server and you should be good to go, i also am on tmobile UK, same settings and use an exchange server. The proxy has been messing which alot of stuff recently, im sure theyve changed something on it since this happened on my Hermes aswell.
Perhaps flash the newer radio onto your Raph....update to HardSPL first then flash Radio 1.02.25.31 to your device from the wiki pages. Read everything to the letter and ul be fine.
Click to expand...
Click to collapse
Thank you, that was quick and efficient! Unticking the proxy did the trick (even with the manual parameters).

Manni01 said:
Thank you, that was quick and efficient! Unticking the proxy did the trick (even with the manual parameters).
Click to expand...
Click to collapse
yer its a weird problem tbh. Have you used the HSPA connection for a laptop/pc yet? fast as hell.

mrvanx said:
yer its a weird problem tbh. Have you used the HSPA connection for a laptop/pc yet? fast as hell.
Click to expand...
Click to collapse
Not yet, trying to get the basics to work first. Used to do this with my Vario III (BT PAN) and was very happy with it. I'm hoping it will be faster with the TP.
Forgive me if I'm being think, but the radio you mentionned is listed as coming form Cingular in the wiki. Will it work with UK T-mob, and will it improve the 3G reception issue?

Manni01 said:
Not yet, trying to get the basics to work first. Used to do this with my Vario III (BT PAN) and was very happy with it. I'm hoping it will be faster with the TP.
Forgive me if I'm being think, but the radio you mentionned is listed as coming form Cingular in the wiki. Will it work with UK T-mob, and will it improve the 3G reception issue?
Click to expand...
Click to collapse
Ive had some improvment with the reception yes, calls dont seem to drop as much, it works fine with tmobile.

it is possible.
Hi, I got a pro, use it on the dutch tmob netwerk, both G and H work fine with the (free) mail2web exchange service.

t-mobile uses standard proxy to bring webpages faster .. unfortionatly it doesnt map all other ports so youtube and such wont work either.. it keeps trying to connect when one plays a video. since it is not neccesary to have a proxyserver it is best practice to turn it off.

mrvanx said:
yer its a weird problem tbh. Have you used the HSPA connection for a laptop/pc yet? fast as hell.
Click to expand...
Click to collapse
Hi MrVanx!
I've tried to setup my BT Pan as usual with my Vaio TZ11, and although the pairing and setup goes fine, when I try to connect I get a "connection is denied" error. Does the BT PAN work out of the box on the TP or do you need a tweak like on the Kaiser?

Sorry I'm afraid this was a "RTFM" case...
As the internet sharing option has disappeared from the comm manager, I assumed the connection was automatic...
Of course you need to launch internet sharing and select BT PAN...
It works great, I get 400-500kbps down and 300-400kbps down, 130-140ms ping. Far from my home broadband, but still good enough.
I tried with my Vario III, I get about the same results (with 3 bars on HSDPA on Kaiser, 4 on TP).
So two questions now:
1) Do you get better performance with T-Mobile UK on the Touch Pro (I'm in Salisbury)
2) Any way to bring Internet Sharing back to comm manager?

This worked for me
Man I wasted 30mins - had already read this post before I ordered and forgotten. XDA dev is the best!

att data problems?

so my phone has been fine ive used romeos and im now using proven
data was never an issue then today im having connection problems
i usually use the my isp connection but now when i try to connect i get the error saying it cant connect for an unknown reason
i switched to media net i can call i can text and i can send pic msgs weather in TF3d works IE works and opera works google maps works and even beejive IM works
but if i try to check email it says "cant connect with current settings" skyfire wont work and kinoma freeplay wont work
wifi works for everything
what could the problem be?!

i think i know why because i have a special employee plan that just got changed and somehow the settings may be altered?
still need a fix though

no one has an idea??

i have set media net default settings and even downloaded the restore and remove proxy cabs tried both and still no

someone anyone?

go to setting-connections, then under media net click on manage exisiting connections
now click on the proxy tab on the bottom, make sure the second box (this network uses a proxy server) is unchecked...
I had the same problem when I switched to Proven

Go to e-mail account options(Menu>Tools>Options)>Choose an account>Edit account setup>Go to that page where Advanced Server Settings tab(click on it)> Under network connection choose MEdia Net. That should fix your problem. Do the same for each of yours e-mail accounts.

lbhocky19 said:
i think i know why because i have a special employee plan that just got changed and somehow the settings may be altered?
still need a fix though
Click to expand...
Click to collapse
where do you work? im at att myself and ive had no problems with my employee plan....

the unchecking proxy made it work even though i had tried the cabs for disabling and enabling
i work at BBY i had been using the My ISP
but they just changed our plan to a cheaper one thats much better and i guess they disabled ISP from use

edskii said:
Go to e-mail account options(Menu>Tools>Options)>Choose an account>Edit account setup>Go to that page where Advanced Server Settings tab(click on it)> Under network connection choose MEdia Net. That should fix your problem. Do the same for each of yours e-mail accounts.
Click to expand...
Click to collapse
The only option I have is 'internet' (so I can't change it to Media Net. When I check my connection media net is the only connection I have though. Any ideas how to get that changed in my ActiveSync/Email settings?

use this cab..it adds a new connection named ATT GPRS which has a different dns..i have been using this since i found it and have never gone back because by utilizing these dns servers you get much better speedtest results and it seems to never have any connection problems..thing is you gootta use a tool like advanced config and go into connection settings in the program and disable medianet from being used as a connection because if both are active your device randomly chooses which to connect with so you gotta make sure medianet is no longer active..here is the cab

lbhocky19 said:
the unchecking proxy made it work even though i had tried the cabs for disabling and enabling
i work at BBY i had been using the My ISP
but they just changed our plan to a cheaper one thats much better and i guess they disabled ISP from use
Click to expand...
Click to collapse
i guess next time it hsppens make sure the feature is the correct one on your account. call your regional account executive to check it out.

it happens from time to time because when medianet is on for quite sometime, it can't authenticate the phone. Easy fix is just to just disconnect from medianet then try it again. You can do this by sliding to settings and clicking on "communications." After that, just turn off data connection and reconnect.

Twitter app Peep working over 3g

Hey I managed to get Peep working over 3g by removing the proxy setting for my connection.
I use my HD2 on T-mobile and the connection wizard automatically puts in settings for proxy for you.
I found that If you go to Settings > wireless controls > menu > Connections
Click setup my proxy server and untick "This network uses a proxy server to connect to the internet" option
this then worked perfectly - I can't say for other networks as I only use T-mobile.
if it doesn't work for you - just delete the existing connection. go to settings > wireless controls > setup a data connection. and your settings will be back to normal.

That's just T-Mobile UK being idiots... Pity it doesn't remove the YouTube blocking...

Wow this works!
Thank you, now I can twitter without wifi

l3v5y said:
That's just T-Mobile UK being idiots... Pity it doesn't remove the YouTube blocking...
Click to expand...
Click to collapse
Youtube works fine for me on t-mobile. You need to register on their site and remove the adult content block.

rovex said:
Youtube works fine for me on t-mobile. You need to register on their site and remove the adult content block.
Click to expand...
Click to collapse
Problem is that it requires a credit card, of which I do not have (you know, what with being under 18...).
I'll just have to wait...

Does it? i dont have one, i just deactivated it and youtube works, simple as that. Maybe it depends how you bought the phone, but my account assumes im 18 since i had to be to get the contract in the first place.

Thanks, fixed it for me , was still wondering why I couldn't use Peep over HSDPA/3G

Big thanks, forgot to check that proxy thing..

spvc500 said:
if it doesn't work for you - just delete the existing connection. go to settings > wireless controls > setup a data connection. and your settings will be back to normal.
Click to expand...
Click to collapse
Unchecking the 'use proxy' option did not work for me - how can I delete the existing connection? All I can do it seems is either manage the connection or add a new one.
I'm on T-Mobile as well and although Opera and some other programs such as Yomomedia work fine over 3G, the HTC applications including email and Peep just do not update unless there is wifi. I tried updating the 'operator database' settings and it told me that my settings were up to date.

Update - I now have GMail working on 3G, this is how:
- Enabled exchange relationship with GMail in ActiveSync (http://www.google.com/mobile/sync/)
- Enabled Directpush in wireless settings
- Enabled 'Sync while roaming' in account settings for my outlook email account (on the device).
Normal email accounts still do not update on 3G (IMAP/POP), only the exchange system seems to work.
HTC Peep/Twitter is still not working unless there is a Wifi connection or USB to PC connection. If I try and 'update now' on 3G it says that the network is not available. I can confirm the network is available and have checked the 'download data while roaming' box in Peep settings.
Any ideas?

So, just removing the proxy didn't work for me. I found an option to update the connection database. I did this (downloads from HTC I guess) and then disabled the proxy. That fixed my Peep connection
The update the connection database, goto settings, wireless, data, menu, update database.

I hope anyone can help me with the problems i am having with HTC Peep,
Some of the time it works fine while updating. other times i get a connection error.. but thats not the worst problem. i was wondering if anyone could help me find a register setting or tweak that would set a maximum limit to the amount of tweets in htc peep, the ammount of errors and loading time of the tab seems to increase when the ammount of tweets become more and more. for now the only solution i have found to speed it up again is hard reset and i dont like that if anyone could help me i would be really greatfull!