As the title suggests?
I will be hard-SPLing my Stellar (when I swap my faulty one) and installing a custom ROM, but would obviously like the option to revert to stock if needed and if someone has already got the roms it'll save me a job.
Hi,
I want to upgrade the ROM of my HTC Tytn II to the version NoThrills WM61 NLD V3. I was wondering what happens to the software, which is currently installed on my device, by the phone provider (KPN Netherlands), like EasyMenu, after this upgrade.
I'm not saying that this software is that important to me, but I just want some more information about this.
Thanks for your answers,
Dennieku
everything will get erased as u will need to do a hard reset...u can back stuff up and do various backups to things u want but u will need to search for that
The phone will be wiped clean and the ROM you upgrade to will be the only thing on it. You can use UC to add stuff you want to the new ROM on first boot (provided that the new ROM supports it).
http://forum.xda-developers.com/showthread.php?t=366337
OK, thanks for your answers !!!!
yeah, technically it gets wiped clean, but mine still has some orange software that got installed the first time it started up after i flashed it.
Hi,
I have an XDA Orbit 2 and wanted to isntall the new uDK 6.1 ROM onto it,
however have not attempted anything like this before.
Would installing it void my warranty?, and if so is there anyway I can change it back to factory setting if I do need to send it back to o2 for any reason?
Thank you,
just curious how many about to own fuzers out there will stick with the stock att rom or are planning on switching to another?
what possible negatives are there if any?
lbhocky19 said:
just curious how many about to own fuzers out there will stick with the stock att rom or are planning on switching to another?
what possible negatives are there if any?
Click to expand...
Click to collapse
you should automatically know the answer to this... quite surprised that you actually asked this but OFCOURSE not staying with stock rom ... load's of bloatware and crappy rom ... NO THANK YOU. I'll just flash romeos or natf's when he comes out with his...
flashing a rom that is not your carriers cancels your warranty so you can't get the phone replaced until you have turned it back into stock.
hha stupid question i suppose but i do laugh since your tilt has a stock rom
what about programs like sprite backup and the jetcet print and such that come on the fuze are those available as free cabs or on the romeos?
lbhocky19 said:
hha stupid question i suppose but i do laugh since your tilt has a stock rom
Click to expand...
Click to collapse
trying to return for warranty
I have a fuze with a flashed rom, and 1 drawback is the keyboard layout is different then the touchpro and there is still no cab file to fix it.
yes there is its called htc fuze keyboard fix
i dont know how to upload files here?
Flash Flash Flash
So what actual roms are compatible with the fuze? I got my fuze 2 days before official launch and I'm dying to flash it but I have no clue if the touch pro's custom roms are compatible with the fuze without screwing some stuff up.
Can I actually put TP roms on the fuze without screwing it up?
achild said:
So what actual roms are compatible with the fuze? I got my fuze 2 days before official launch and I'm dying to flash it but I have no clue if the touch pro's custom roms are compatible with the fuze without screwing some stuff up.
Can I actually put TP roms on the fuze without screwing it up?
Click to expand...
Click to collapse
yes you can
just install the keyboard fix after and you are fine
but i do have a question. i have yet to be in a 3g area yet with my fuze since i flashed the rom
3g should work fine with romeos right?
lbhocky19 said:
yes you can
just install the keyboard fix after and you are fine
but i do have a question. i have yet to be in a 3g area yet with my fuze since i flashed the rom
3g should work fine with romeos right?
Click to expand...
Click to collapse
So this would be one of the things that become unstable/broken???
i was just asking i have no idea
Has anyone recontructed the stock from the newly released Fuze yet? My Fuze has ROM vers. 1.95.502.5 WWE. I just wanna know if I'll be able to put the orig rom back on the phone if I have to before I flash it.
briols6 said:
I have a fuze with a flashed rom, and 1 drawback is the keyboard layout is different then the touchpro and there is still no cab file to fix it.
Click to expand...
Click to collapse
The cab is attached
baltika09 said:
Has anyone recontructed the stock from the newly released Fuze yet? My Fuze has ROM vers. 1.95.502.5 WWE. I just wanna know if I'll be able to put the orig rom back on the phone if I have to before I flash it.
Click to expand...
Click to collapse
Almost flashed... and noticed that the ATT build might be newer.
FWIW ATT did a nice job with the default settings (i.e. sounds/notifications), but would like to have the optimized memory pool from a cooked rom.
stock rom lasted 24 hours here before being destroyed....
Romeos2 is what I ended up with... at&t stock rom seems to ignore/bypass registry settings on some stuff (startup/shutdown animation, HSDPA support, etc.)
Glad I made the switch.
What I ended up doing is flashing an HTC ROM and then just the radio from AT&T, in oder to maintain 3G capability. Of course, the Hard SPL flash comes first.
I flashed my Fuze right away.
I had to exchange it because of an annoying slider wobble issue. I didn't bother flashing it back.
The guy at the AT&T store didn't even notice.
BTW... My second FUZE had a much better/tighter slider. No wobble at the top in the closed position.
When I get mine next week, I will run it for a day or 2 just to make sure that all is well, and then it is the Elite Team rom for me......
Later............
I will flash mine but just wanna make sure I start with a working device.
Do I need to unlock the Fuze to flash ROM?
Will Kaiser SuperCID and Security Unlocker v0.1 work with the Fuze?
wmserver said:
I will flash mine but just wanna make sure I start with a working device.
Do I need to unlock the Fuze to flash ROM?
Will Kaiser SuperCID and Security Unlocker v0.1 work with the Fuze?
Click to expand...
Click to collapse
you just need the raphael hard spl
Hi, ive flashed a few handsets before (wallaby x2, alpine and a wizard) and had no problems but for some reason cannot even get off the first hurdle with my t-mobile vario iv and cant even unlock the dam thing to flash a custom rom! ive looked at post after post and downloaded so many programs like hard spl and nothing works. the programs ether wont even open or they fail half way through the process but havent bricked my phone so far (fingers and toes crossed!) please could someone help me with what unlocking software i need, what radio rom and main rom i should be using. Really i would like to try a standard wm6.5 rom and then try custom roms after but like what nrg have done if stock is not avaliable. its model is RAPH300 part no- 99HFP013-00
my current rom version is 1.69.110.8 WWE
my current radio version is 1.02.25.19
protocol version 52.33.25.17U
my email is [email protected] if you prefer to help via email
thanks in advance everyone, steve.
Anyone out there?
Ensure you have hard SPL'd your handset before trying to flash ANY custom roms
before you do that, see if there is an updated T-Mobile rom, see if that update will work, if that update works without any glitches then it'll be alright, if you get an error with an official update then possibly something wrong with either your pc setup or the handset
if your using vista, make sure you've got the windows mobile device centre installed, if not, you need to go to microsoft and download it
if using windows xp, make sure you've got the latest activesync installed.
ensure the cable your using is not faulty by trying it with a different cable
and good luck!
duke_stix said:
Ensure you have hard SPL'd your handset before trying to flash ANY custom roms
before you do that, see if there is an updated T-Mobile rom, see if that update will work, if that update works without any glitches then it'll be alright, if you get an error with an official update then possibly something wrong with either your pc setup or the handset
if your using vista, make sure you've got the windows mobile device centre installed, if not, you need to go to microsoft and download it
if using windows xp, make sure you've got the latest activesync installed.
ensure the cable your using is not faulty by trying it with a different cable
and good luck!
Click to expand...
Click to collapse
thanks for trying to help, have you ever read something over and over and repeatedly missed something in it? i think thats what i did wrong. i did not see the bit about removing my sim card even though i had read the noobs guide again and again. removed my sim and bosh, spl worked! then everything else was a breeze and i am now running the energy 3.0 wm6.5 rom! havent flashed the radio yet but will probably do that today. the energy rom is a vast improvement on my stock 6.1 rom in many areas and seems to have improved camera performance quite a lot (not quality) and the menus are going to be great once i have got used to the totally different interface. does anyone have any sugestions on other roms tha may be better than this one?
Hi there
Glad to hear you got it working!
I am personally using NATF's WM6.1 lite touch pro rom as all i look for in a rom is stability as i actually use my phone for phone/text purposes and there is nothing more annoying than a hanging phone when your trying to quickly reply to a text message!