I installed WM6.5 to my Fuze and it now has the black HTC logo on startup, then skips the AT&T animation, and shows the orange Windows screen.
Now, I don't want the AT&T one back but I downloaded the default HTC start-up GIF and WAV files for the Kaiser, and I want to use them on my Fuze. The problem is, under HKLM/Software/HTC/StartupAnimation, there is nothing there. And I don't know the first thing about recreating what should be in there.
Any ideas?
Assuming that you put "default HTC start-up GIF and WAV files for the Kaiser" in the correct place, then find/search for FUZE Tweak application (or TouchPRO or Diamond tweak, whatever people call) to re-enable it. It is located in 12.1 and 12.2 in the mentioned app menu.
Thanks
I had that app when my Fuze had WM6.1, can't believe I didn't remember it.
I'll see if it works, they should be in the right place.
Thanks, I installed it and enabled but still nothing happened. I think it's because normally it would have DWORDS and strings in that folder, and the Diamond Tweak app would know what to change, but on my phone, there is nothing in that folder. So the tweak app doesn't have anything to change.
In that case, does anyone care to post what is in the StartupAnimation folder on their Raphael?
Related
Okay, I've searched through the registry and \windows folder and cannot find the startup noise that is played after a soft reset, when the system is loading.
It's very loud and would like to get rid of it. I do have my "system" sounds turned off e.g. "Events" and it doesn't help.
Try here: HKEY_LOCAL_MACHINE\SOFTWARE\Palm\Varnish\DialLookupPlugin\PhoneStatus
doedoe said:
Try here: HKEY_LOCAL_MACHINE\SOFTWARE\Palm\Varnish\DialLookupPlugin\PhoneStatus
Click to expand...
Click to collapse
Nope. I saw that one too.
That's for turning the phone (radio) on/off and then it shows you that Carrier logo splash screen.
I need when WM5 boots up...
In fact, I can't even find the sound file that is playing when it boots. I thought it was "notify.wav" but that's not it.
You'd think it would be here:
\HKEY_CURRENT_USER\ControlPanel\Sounds\SystemStart\Sound
But \SystemStart\Sound doesn't exist and I can't find anything similar.
Really baffling (and yes, I know I could just throw the vibrate switch on, but not at 4 am when I do a sched. reset!).
Found it - Disable Startup Sound Treo 700wx
I, too, have been searching for this one. The problem isn't technically when restarting the Treo 700wx, it actually had to do with the device realizing that an SD card has been inserted (which it happens to do at startup).
Here's the registry key:
HKCU\\ControlPanel\Volume\SDInsertSound\File
This was set to "Alarm1.wav", I changed it to "No Sound.mid" (a blank sound file).
Enjoy!
Anyone figure out if we can actually use this on the wizard and if so, how?
Id assume you'd need the program from the wing...I kno the tilt has it also
I've tried it once but it didn't work and I didn't pursue it. WM6 ROM's are pretty tight for space and that was one that could go.
Ok, how about startup sounds?
I'm not a programmer or anything, but I was thinking that someone could possibly make a program that detects when the screen is rotated (after you open the keyboard it rotates).
So when it turns into landscape the program detects this and loads a specified sound, and the same for when you close the keyboard and it goes back to portrait..
Just a thought
NTS, I tried it on my Hermes and didn't get it to work. Might on the wizard. Here is the link
http://forum.xda-developers.com/showthread.php?t=315333
and
http://www.howardforums.com/showthread.php?t=1195063&highlight=Sliding+Sound+Guide
http://70.87.94.66/~tiermann/index.php?option=com_content&view=category&layout=blog&id=2&Itemid=2
I recently flashed my phone to a custom rom and CID unlocked it but now I have a few small problems. I used the touchflo version from http://forum.xda-developers.com/showthread.php?t=367534&highlight=touchflo 1.I got notification error messages that say cannot execute clocknot.exe calnot.exe repllog.exe when I first started it up and they continue to pop up frequently.
2. The post says "- go to start/programs/Touch/TFSettings , then set the way you want to activate the cube " When I go to programs there is no Touch folder and TF settings. If I go to settings/system there is touchflo but the only option it has is enable sound when finger scrolling. Should there be something there in programs?
3. I downloaded the files for the cube but have no idea what to do. Im guessing editing the registy with the stuff that is in the xml file has something to do with it. Tried doing some searches and reading but no luck so far. Someone want to point me in the right direction?
4. Also in CommMgr whenever I try to take the X off the wifi it goes off for a second then goes back on but my wifi seems to work as I went on ebay so that is very minor.
Mike Struc said:
I recently flashed my phone to a custom rom and CID unlocked it but now I have a few small problems. I used the touchflo version from http://forum.xda-developers.com/showthread.php?t=367534&highlight=touchflo 1.I got notification error messages that say cannot execute clocknot.exe calnot.exe repllog.exe when I first started it up and they continue to pop up frequently.
2. The post says "- go to start/programs/Touch/TFSettings , then set the way you want to activate the cube " When I go to programs there is no Touch folder and TF settings. If I go to settings/system there is touchflo but the only option it has is enable sound when finger scrolling. Should there be something there in programs?
3. I downloaded the files for the cube but have no idea what to do. Im guessing editing the registy with the stuff that is in the xml file has something to do with it. Tried doing some searches and reading but no luck so far. Someone want to point me in the right direction?
4. Also in CommMgr whenever I try to take the X off the wifi it goes off for a second then goes back on but my wifi seems to work as I went on ebay so that is very minor.
Click to expand...
Click to collapse
I also had some problems with .exe files when I have flashed TNT roms. Now I'm running WM 6.1 Slim edition and no problems. I hope it helps.
hi there!
I downloaded JUVS HTC Large Titlebar and HTC Enlarge Start menu CABs and installed both on my E-TEN M800 (VGA).
They installed fine and I now have the "large start menu" item in my system settings.
But when I check the checkbox to turn it on, it still doesnt enlarge.
I rebooted the device and still nothing. I basically only need the zooming of the notification icons in the start-bar.
have I missed something? do i need additional files?
thanks
Bernhard
the old one just for QVGA, try this one, but dun know can it work on ETEN
thanks, but it doesn't work.
maybe it needs touchFLO so its only activated when you use the finger? or something like that?
No touchflow wouldnt make a difference on this. Unfortunatly some of the items on here will only work with HTC devices and i think this may well be one of them im afraid. Unless anyone else can shed any light
Tried the Large Start Menu once on my iPAQ, and what I found was that the service (htcStartMenuService.dll) doesn't automatically start. Using DotFred's Taskmanager to manually start the service made the large start menu appear... until the next soft reset.
The same thing probably happens with the large titlebar thing.
thanks ridolfo, this works!
now i have to find a way to start it automatically on reboot
makes my e-ten even more userfriendly!
edit: i just added this nice and useful taskmanager to my StartMenu and on reboot, i open it, go to the services tab and click the little start icon for the LargeTitleBar service. thats it.
works like a charm.
IIRC, you can even open it on the services tab, using a command-line switch. Have a look in the "About" screen for possible command-line switches (I think it's in the "About" screen, but I'm not sure).
I'm still hoping that someone can explain why some of the HTC services do auto-start, but others don't.
yes, because when you install the LargeTitleBar it correctly creates its entry in the Registry and is bound to be started, but somehow it doesnt.
In my brand new HTC Touch Cruise, large menu option is ticked, but after playing around with apps or settings it becomes small, allthough it's still ticked. I have to disable and reenable it to make it big again. It's a bit of a problem, as it happens often. Advice would be appreciated.
same problem
couldn't this problem be fixed by some registry entires ?
I mean to put an application into autostart shouldn't be a problem, well for me, as a hardcore newp it is acutally, but maybe not fo you guys
on my xperia x1 i've got the same problem .
large start menu
bommel0815 said:
...
now i have to find a way to start it automatically on reboot
...
Click to expand...
Click to collapse
Hi! at all!
Have you found a solution?
I tried to use very intereresting soft GSen but without success...After instalation and manually activation (by GSen.exe) it turns only File Explorer window or in case of activation from Programs it turns only Programs window. If I close File Explorer or Programs window it dosnt works...I tried many combination and settings - but without success. Do you have the same experience? Or any advice?
There are 3 files titled Gsen.exe I think... Make sure that if you open the shortcut twice, the second time it pops up a window saying "unload program?"... That's the right one. Also, when you open it, to confirm it's running there will be 1 white pixel at the very top center of the screen. I know for a fact it works on the Touch Pro, as I use it on mine. When it says "unload program" it's asking if you want to disable it, click yes if you don't want to use it anymore... Good luck.
Unfortunatelly a pixel signals that GSen is working...and sreens dont turn :-(
Jetra said:
Unfortunatelly a pixel signals that GSen is working...and sreens dont turn :-(
Click to expand...
Click to collapse
Hmmm... I know there was a config setting where you could choose what programs it does and doesn't work for, use the readme and just browse through the files to see what you can do. I can't say I tested it with a ton of applications, but I got like 3 or 4 to turn (and haven't used it since)... I'm a bigger fan of profile anyhow, I may as well have a Diamond with a memory card slot (excepting emails).
I have the same problem. I use the default configuration. So it should work, but it doesn't work. It just works with the program/window from which it was started.
I've already posted this problem in a German forum where the developer has a sub-forum, but I still didn't get an answer.
Sorry guys, we had an Raphael prototype device with AKU 1.3.1. and pre-alpha ROM for short time (testing time) in the past and it was working.
This is the reason why we wrote: Tested on HTC Raphael (Prototype)
On the basis of the missing new device and ROM, we are not able to check your problems.
Sorry again.
What a bummer! I hope you'll get a new device/ROM to test this soon ;-)
You are not alone with this kind of wishes.
Actually, there is just one VERY annoying problem with GSen 1.7 - it works for me (Touch Diamond, Dutty's 1.9) except onlyfor(1) - if this option is defined, windows are not recognized neither by class no by name or exe name... I believe this is not a matter of ROM, because I had this very problem on default ROM which I flashed to test if GSen will work... I also believe it could be not Diamond-specific...
CharlyV, could you please spend some time to find out if it's possible to resolve this?
Thanks in advance - I'm a loyal and official user of SKTools...
It doesn't work here either...
guys it even says so on gsen home page
Jetra said:
I tried to use very intereresting soft GSen but without success...After instalation and manually activation (by GSen.exe) it turns only File Explorer window or in case of activation from Programs it turns only Programs window. If I close File Explorer or Programs window it dosnt works...I tried many combination and settings - but without success. Do you have the same experience? Or any advice?
Click to expand...
Click to collapse
This hack does NOT work with the Touch Pro as the Touch Pro will base most of its screen rotation on the sliding keyboard instead.
Gsen automatical loading??
Hey guys.
I've got some beginner's questions.
My gsen doesn't start automatically when I start my Diamond.
Is it normal?
Is it possible to do anything?
Thanks.
place shortcut into Windows\Startup directory
CharlyV said:
You are not alone with this kind of wishes.
Click to expand...
Click to collapse
hi have loaded GSEN onto HTC touch HD and program worked well, i since put SPB plus and shell on and now GSEN wont work and also in the album section it wont allow finger scrolling. any ideas???