Database Info

ring tone keeps changing to default

I tried doing a search, but struggled finding something. Every single rom I flashed, when I go into phone settings and I click ok, it goes to the ring page setting and I see my ring tone change to some default. I could guess maybe it's due to x-button 1.0 but not sure. Does anyone have any clue for a fix?

I don't exactly follow. Just to clarify, you go to Start -> Settings -> Phone change your ringtone to something other than the default, hit "OK" and instead of closing/minimizing, it takes you directly back to the "Phone" settings page and it's set itself back to the default ringtone?
Is that what you mean?
thomassster said:
I tried doing a search, but struggled finding something. Every single rom I flashed, when I go into phone settings and I click ok, it goes to the ring page setting and I see my ring tone change to some default. I could guess maybe it's due to x-button 1.0 but not sure. Does anyone have any clue for a fix?
Click to expand...
Click to collapse

sometimes I don't get good reception at the location I'm at so I go into the phone settings, hit network tab and select find network. I click ok and then it sends me back to the phone tab where my sounds are at and my ring tone is changed to the default. Whenever I do this, I constantly have to change it back to my original ring tone.
I know it's a small picky problem, but just never had this problem in WM5.

Well, that is strange. I couldn't replicate it.
Do you let your battery die a lot? I've heard a lot of Wizards can often revert to default settings if your battery goes completely dead.
thomassster said:
sometimes I don't get good reception at the location I'm at so I go into the phone settings, hit network tab and select find network. I click ok and then it sends me back to the phone tab where my sounds are at and my ring tone is changed to the default. Whenever I do this, I constantly have to change it back to my original ring tone.
I know it's a small picky problem, but just never had this problem in WM5.
Click to expand...
Click to collapse

I find this happens to me as well... and I never let my battery completely die. I wonder if it's related to the fact that my main phone ringtone is on the storage card... with the Wizard's notoriously 'wonky' miniSD slot, maybe the connection is occasionally interrupted and causes the problem.

Same problem here, using mfrazzz Crossbow Reloaded 1.5. I use a mp3 file as my ringtone, which is in the root of my storagecard.

I have a similar issue and I think it is down to some registry settings and where your ringtones are. I built my ROM with an additional Ringtone and then set this to be the default ringtone through an .RGU file. It works as long as you don't change it.....
If I change the rington (or turn on vibrate) then I can never re-select the ringtone, even though it is listed. If I edit the registry to change it, it works, but obviously editting the registry to change ringtones is a bit OTT. I have been playing around with this as I have a spare Wizard so if I find anything else I will post on this thread.
The registry keys in question are:
Code:
HKCU\ControlPanel\Sounds\
HKCU\ControlPanel\Sounds\Ringtone0
HKCU\ControlPanel\Sounds\RingTone2
HKCU\ControlPanel\SoundCatagories\Ring
HKCU\ControlPanel\SoundCatagories\RingPreview
HTH
Andy

OK, quick update. The file I had as my default ringtone was 'Cellular4.wav'. I added this to the ROM and changed the references in the registry (.RGU file) to point to this file. Now if I changed it via Phone, Options then the changes would take effect, however selecting this file again via the same options didn't work and the file would appear to be selected but was the previous option (filename or vibrate), manually changing this via the Registry worked however.
I have now re-encoded the file to be a .WMA file and re-built the ROM and it now appears to work. The file needs adding to the registry entry to allow it to be selected if the file isn't in the \Windows\Rings folder:
Code:
[HKEY_CURRENT_USER\ControlPanel\Sounds]
"Ringtones"=multi_sz:"Ring-WindowsMobile .wma", "Ring-Standard .wma", "Ring-Vision .wma", "Cellular4 .wma"
HTH
Andy

I'm suprise I'm not the only one with this problem. So adding your filename to the registry fixes the problem?
ADB100 said:
OK, quick update. The file I had as my default ringtone was 'Cellular4.wav'. I added this to the ROM and changed the references in the registry (.RGU file) to point to this file. Now if I changed it via Phone, Options then the changes would take effect, however selecting this file again via the same options didn't work and the file would appear to be selected but was the previous option (filename or vibrate), manually changing this via the Registry worked however.
I have now re-encoded the file to be a .WMA file and re-built the ROM and it now appears to work. The file needs adding to the registry entry to allow it to be selected if the file isn't in the \Windows\Rings folder:
Code:
[HKEY_CURRENT_USER\ControlPanel\Sounds]
"Ringtones"=multi_sz:"Ring-WindowsMobile .wma", "Ring-Standard .wma", "Ring-Vision .wma", "Cellular4 .wma"
HTH
Andy
Click to expand...
Click to collapse

thomassster said:
I'm suprise I'm not the only one with this problem. So adding your filename to the registry fixes the problem?
Click to expand...
Click to collapse
I think the file needs to be there as well, plus it needs to be a .wma file (as opposed to a .wav or .mp3), I am not sure about the extra space in the filename (cellular4 .wma), however it is working fine for me now.
Andy

I have been suffering from this too but couldn't find the root cause nor repeatability.
One thing I did find is that switching from Internet Calling back to calling via GSM reset the ring type back to default, even though when initially going from GSM to Internet Calling the latter rang correctly.

I have this problem as well. If the tone is highlighted when I press OK it goes back to default... Click play and then stop..... now it is not highlighted, and it will stay!!

It just doesnt like you Badbert..

happened for me too, then i installed Signed_Tmo Ringtones that comes with tmobile rom. It fixed it. Hope this works for you as well.

wow...it worked, thanks!
nycelitemaster said:
happened for me too, then i installed Signed_Tmo Ringtones that comes with tmobile rom. It fixed it. Hope this works for you as well.
Click to expand...
Click to collapse

vibrating keypad wm6?

I saw this registry tweak:
http://www.mdatweak.com/tweak_detail.php?tweak=14
that adds vibration to buttons of the dial pad
However I tried it in WM6 and it doesn;t work anymore. Does anybody know how to get it working in WM6?

I used the attached cab and got it working in WM6.
It looks like it makes the same changes as on that website, only automatically.
One thing I noticed, which might help or might not, was that it didn't seem to vibrate when I had "Keypad" under Phone Settings set to "Off".
Try setting it to "Short tones" and see if it works.
Oh, and you've reset your phone after making the registry tweaks, right?

yep, that was it. my device (htc herald wm6) was set to no sounds.
I found that it does not always vibrate. Sort of as if the vibrate motor has to start up. It worked best if the settings were set to long tones.
But I'm not using it anymore. in practice it is not as handy as I though it would be

vibrating keypad
hi guys. i downloaded the above attached file to my tytn 11 (orange). i find it does not work well (due to the time lag in the vibrating winding-up process) - and wish to delete it (it is actually quite annoying) and regain the normal keypad tone. i have gone into 'settings' 'remove programmes' and see no item listed. I have gone into 'file explorer' and delete the file name - to no effect. have i done the wrong thing? can anyone help me, please?

First of all...
This is wizard forum not herald....
Then use this...
attached let me know if this works...

+ Que PPC. thanks. have tried your solution (and then done a soft reset). unfortunately it has not worked! could you please consider another solution...?

noup really no...
I dont have other this works forme on Hermes and in wizard the truckQteka makes the dids! but i dont find it anymore. sorry men ask on Kaiser forum

Re-enabling the start-up animation?

I installed WM6.5 to my Fuze and it now has the black HTC logo on startup, then skips the AT&T animation, and shows the orange Windows screen.
Now, I don't want the AT&T one back but I downloaded the default HTC start-up GIF and WAV files for the Kaiser, and I want to use them on my Fuze. The problem is, under HKLM/Software/HTC/StartupAnimation, there is nothing there. And I don't know the first thing about recreating what should be in there.
Any ideas?

Assuming that you put "default HTC start-up GIF and WAV files for the Kaiser" in the correct place, then find/search for FUZE Tweak application (or TouchPRO or Diamond tweak, whatever people call) to re-enable it. It is located in 12.1 and 12.2 in the mentioned app menu.

Thanks
I had that app when my Fuze had WM6.1, can't believe I didn't remember it.
I'll see if it works, they should be in the right place.

Thanks, I installed it and enabled but still nothing happened. I think it's because normally it would have DWORDS and strings in that folder, and the Diamond Tweak app would know what to change, but on my phone, there is nothing in that folder. So the tweak app doesn't have anything to change.
In that case, does anyone care to post what is in the StartupAnimation folder on their Raphael?

Black screen where TF3D should be at startup..

I'm not sure what happened, but I've been noticing that now when I boot up my VZW TP2, the launching touchflo 3d screen pops up, then goes away and there is nothing but a black background and the windows taskbar.
The black screen looks like a program with an all black background and no text/content, it has an X in the upper right hand corner and I can click that X to reveal TF3D.. I can also click anywhere on the screen and/or END key and reveal TF3D.
This happens at startup every time now.
Things I've done since I noticed the problem;
Installed HDBoobs
Installed Diamond Halogram w/ ATi Graphics Driver
Put HTCAPI.dll in the \windows\ directory
Installed .NET CF 3.5
Installed Schap's Registry Editor
Installed J.S. Advanced Configuration Tool 3.3
Installed Ilium Software Screen Capture
Installed Windows Live (newest version)
Installed Microsoft Facebook Application
Did '7MP Panorama' Tweak
Did 'Reveal 5 Hidden Camera Settings' Tweak
Things I've done after noticing the problem;
Installed Microsoft ICS
Installed Garmin MobileXT
Did 'Close Opera with X instead of minimize' registry mod
Did 'ResProxy ShareMemSize=0' registry mod
Installed NoPushInternet
EDIT 1:
I've now removed;
'ResProxy ShareMemSize=0' registry mod (slowed me down too much)
HDBoobs
Diamond Halogram w/ ATi Graphics Driver
Nothing has changed.
EDIT 2:
I had it setup to be password protected. After removing the password option and soft-resetting, the problem is gone. Is this a bug? Is there a fix for this? I know it seems minuscule, but this isn't how it should work and I want to fix it
I'd like to avoid doing a hard reset if possible.. so any advice, other than 'ignore it' would be appreciated.

I think that I have the same thing happening. I don't think that it was like this out of the box, but I'm not sure when it started. Basically, my phone loads showing the taskbar at the top and the two soft keys at the bottom. Everything in between is black. If I touch the screen, then the TouchFlo stuff shows up. After that, it's fine.
I do have a lock code enabled. It was forced by an Exchange Server policy. Not sure if this "issue" arose at that point or not.

I asked the same question here... http://forum.xda-developers.com/showthread.php?t=560636
Seems to be related to having the PIN lock enabled. I too am required to use this for work reasons, and have not found a way to get TF3D to display on boot up without having to touch the screen.

SecretAgentMan said:
I think that I have the same thing happening. I don't think that it was like this out of the box, but I'm not sure when it started. Basically, my phone loads showing the taskbar at the top and the two soft keys at the bottom. Everything in between is black. If I touch the screen, then the TouchFlo stuff shows up. After that, it's fine.
I do have a lock code enabled. It was forced by an Exchange Server policy. Not sure if this "issue" arose at that point or not.
Click to expand...
Click to collapse
This is exactly what is happening to mine..
Sublimedelta9 said:
I asked the same question here... http://forum.xda-developers.com/showthread.php?t=560636
Seems to be related to having the PIN lock enabled. I too am required to use this for work reasons, and have not found a way to get TF3D to display on boot up without having to touch the screen.
Click to expand...
Click to collapse
At least we're not alone.. now it's a known issue, hopefully someone will look further into it (since I don't know how to fix it)
-mak

Here too
First I installed XDA shutdown to perform soft resets. Then the memmaid demo to further my efforts to be clean & mean. Just installed s-k-tools to my HTC Sprint Touch Pro 2 (because memmaid demo misreported my memory!)and after running clean I'm getting cprog.exe & sktools.exe errors and now "bluetooth stack failed to load" -my friggin bluetooth wont load. Only other non stock thing is Duttys disable push internet. Did I make a mistake in purchasing this tweakware? Can I rectify these situations without a hard reset? Somewhere along the way the black screen thing occurred too.

Grindscorelink said:
First I installed XDA shutdown to perform soft resets. Then the memmaid demo to further my efforts to be clean & mean. Just installed s-k-tools to my HTC Sprint Touch Pro 2 (because memmaid demo misreported my memory!)and after running clean I'm getting cprog.exe & sktools.exe errors and now "bluetooth stack failed to load" -my friggin bluetooth wont load. Only other non stock thing is Duttys disable push internet. Did I make a mistake in purchasing this tweakware? Can I rectify these situations without a hard reset? Somewhere along the way the black screen thing occurred too.
Click to expand...
Click to collapse
Do you have a password-required device lock setup? If so, and you're getting the black-screen issue just after you unlock your phone when you first boot it up (from an off state), then you're probably in the same boat as us..
-mak

Same issue here.... yes I have a PIN lock code.

brent372 said:
Same issue here.... yes I have a PIN lock code.
Click to expand...
Click to collapse
interesting. I don't have the code, and I've never seen this. Then again other software installed might make a difference.
WTF is HDBoobs?

LOL... I had the same question.

Believe it or not . . .
http://www.freewarepocketpc.net/ppc-download-hdboobs.html

Any Way to stay in keypad mode during call?

My screen goes crazy. During a call up to my ear it flips to horizontal, changes out of key pad view and not always to mute/speakerphone... keys view, sometimes to contact info, and can be a nightmare to get back to "end call." I've found times when the caller hung up but the TP2 put them on hold and kept my time going.
Any programs and or reg hacks to:
1) stop the horizontal flip when placed to an ear, and
2) keep it in keypad mode or general call mode?
Real pain when dialing into a system that requires keypad responses. Everytime I put it back to my ear I have to go through a crazy sequence to get back to the key pad.
This is my only complaint wth this phone, it's not easy to use as a phone!
Thanks.

I have the same problem when dialing into VM, or into any call queue. I looked through the registry a bit. Didn't see anything obviously labeled.

yeah me too. Only thing I could find was using Gyrators' exception list to not rotate the phone, but it wasnt 100% reliable. I would *LOVE* to find a way to stay in keypad mode too.

Hi All - I guess I'm just jumping on the bandwagon but I have the same issue and find it annoying. I loaded the 'incall screen tweak' but that didn't work. Any help more seasoned members than I could offer would be greatly appreciated.
Cheers!!!

I had the same issue too, whenever I put my phone up to my ear (left handed) it would go into landscape. The fix is simple but you have to edit a registry setting. I'm going by memory here, so please forgive the vague info
1) make sure to backup your reg info
2) using your favorite reg edit program, goto
HKCU\Software\HTC\HTCSENSOR\GSensor\Whitelist
3) now this is the part I kind of forgot, you need to find a string with the DATA value that includes "phone" or "dailer"
4) delete that string
5)soft reset and give it a try, the phone shouldn't go into landscape whenever you turn it during a call.

AstarteSV said:
I had the same issue too, whenever I put my phone up to my ear (left handed) it would go into landscape. The fix is simple but you have to edit a registry setting. I'm going by memory here, so please forgive the vague info
1) make sure to backup your reg info
2) using your favorite reg edit program, goto
HKCU\Software\HTC\HTCSENSOR\GSensor\Whitelist
3) now this is the part I kind of forgot, you need to find a string with the DATA value that includes "phone" or "dailer"
4) delete that string
5)soft reset and give it a try, the phone shouldn't go into landscape whenever you turn it during a call.
Click to expand...
Click to collapse
OK, I went where you said, but no dialer, and only phone entry is:
Phone/Lock/Compose/Picture
String= Dialog
And deleting this stopped "lefty" in call flipping? Doesn't make sense to me. Doesn't seem to only control dialer or phone.
Please confirm or anyone out there please help. I don't want to delete something don't understand.
Can I simple change Dialog to something like "Zero" or "0"?

MLT2004 said:
OK, I went where you said, but no dialer, and only phone entry is:
Phone/Lock/Compose/Picture
String= Dialog
And deleting this stopped "lefty" in call flipping? Doesn't make sense to me. Doesn't seem to only control dialer or phone.
Please confirm or anyone out there please help. I don't want to delete something don't understand.
Can I simple change Dialog to something like "Zero" or "0"?
Click to expand...
Click to collapse
That's it! forgot what the process name was, but yeah, deleting that stopped the phone from trying to change to landscape during a phone call. Deleting that will tell the G-Sensor not to change the orientation of the phone's screen during a phone call, however it also tells it not to change the orientation during a picture (which wasn't a big deal for me cuz I can change it when I view them in windows). You can always look up the process in google or even the forum search tool if you're still scared.

If anyone else is interested I tried a "partial" delete of the suggestion above. I created a new string leaving out the Phone.
Lock/Compose/Picture
String= Dialog
deleted old string with phone/....
So far no more "lefty" crazy problems, and pictures seem to appear in landscape.
Here's hoping all is OK!

MLT2004 said:
If anyone else is interested I tried a "partial" delete of the suggestion above. I created a new string leaving out the Phone.
Lock/Compose/Picture
String= Dialog
deleted old string with phone/....
So far no more "lefty" crazy problems, and pictures seem to appear in landscape.
Here's hoping all is OK!
Click to expand...
Click to collapse
Awesome, good job!

I installed Gyrator 2. Just create a new event with the phone as the application. Nothing for orientation, nothing on stylus, and rotate screen for actions. Then promote the event to the top. Highlight your new phone event and select orientation, it will have a check mark and a number one next to the event. It hasn't failed on me yet and I use the key pad all day long with my job!

I just upgraded to the Verizon official WinMo 6.5 and the registry hack doesn't seem to work anymore, and I'm having issues getting Gyrator to work, has anyone resolved this issue for WinMo 6.5?

AstarteSV said:
I just upgraded to the Verizon official WinMo 6.5 and the registry hack doesn't seem to work anymore, and I'm having issues getting Gyrator to work, has anyone resolved this issue for WinMo 6.5?
Click to expand...
Click to collapse
I haven't had any of the issues with the 6.5 upgrade that were mentioned with 6.1. Haven't needed to add S2U2 since the screen lock is built in and the phone is much more responsive when placed to the ear and then moved away to access the keypad. It's not perfect but vastly improved over 6.1...
I guess my point is try it the way it is with 6.5 and see if you thinks its better. leave gyrator and reg hacks aside for a few.