Related
I saw this registry tweak:
http://www.mdatweak.com/tweak_detail.php?tweak=14
that adds vibration to buttons of the dial pad
However I tried it in WM6 and it doesn;t work anymore. Does anybody know how to get it working in WM6?
I used the attached cab and got it working in WM6.
It looks like it makes the same changes as on that website, only automatically.
One thing I noticed, which might help or might not, was that it didn't seem to vibrate when I had "Keypad" under Phone Settings set to "Off".
Try setting it to "Short tones" and see if it works.
Oh, and you've reset your phone after making the registry tweaks, right?
yep, that was it. my device (htc herald wm6) was set to no sounds.
I found that it does not always vibrate. Sort of as if the vibrate motor has to start up. It worked best if the settings were set to long tones.
But I'm not using it anymore. in practice it is not as handy as I though it would be
vibrating keypad
hi guys. i downloaded the above attached file to my tytn 11 (orange). i find it does not work well (due to the time lag in the vibrating winding-up process) - and wish to delete it (it is actually quite annoying) and regain the normal keypad tone. i have gone into 'settings' 'remove programmes' and see no item listed. I have gone into 'file explorer' and delete the file name - to no effect. have i done the wrong thing? can anyone help me, please?
First of all...
This is wizard forum not herald....
Then use this...
attached let me know if this works...
+ Que PPC. thanks. have tried your solution (and then done a soft reset). unfortunately it has not worked! could you please consider another solution...?
noup really no...
I dont have other this works forme on Hermes and in wizard the truckQteka makes the dids! but i dont find it anymore. sorry men ask on Kaiser forum
hi there!
I downloaded JUVS HTC Large Titlebar and HTC Enlarge Start menu CABs and installed both on my E-TEN M800 (VGA).
They installed fine and I now have the "large start menu" item in my system settings.
But when I check the checkbox to turn it on, it still doesnt enlarge.
I rebooted the device and still nothing. I basically only need the zooming of the notification icons in the start-bar.
have I missed something? do i need additional files?
thanks
Bernhard
the old one just for QVGA, try this one, but dun know can it work on ETEN
thanks, but it doesn't work.
maybe it needs touchFLO so its only activated when you use the finger? or something like that?
No touchflow wouldnt make a difference on this. Unfortunatly some of the items on here will only work with HTC devices and i think this may well be one of them im afraid. Unless anyone else can shed any light
Tried the Large Start Menu once on my iPAQ, and what I found was that the service (htcStartMenuService.dll) doesn't automatically start. Using DotFred's Taskmanager to manually start the service made the large start menu appear... until the next soft reset.
The same thing probably happens with the large titlebar thing.
thanks ridolfo, this works!
now i have to find a way to start it automatically on reboot
makes my e-ten even more userfriendly!
edit: i just added this nice and useful taskmanager to my StartMenu and on reboot, i open it, go to the services tab and click the little start icon for the LargeTitleBar service. thats it.
works like a charm.
IIRC, you can even open it on the services tab, using a command-line switch. Have a look in the "About" screen for possible command-line switches (I think it's in the "About" screen, but I'm not sure).
I'm still hoping that someone can explain why some of the HTC services do auto-start, but others don't.
yes, because when you install the LargeTitleBar it correctly creates its entry in the Registry and is bound to be started, but somehow it doesnt.
In my brand new HTC Touch Cruise, large menu option is ticked, but after playing around with apps or settings it becomes small, allthough it's still ticked. I have to disable and reenable it to make it big again. It's a bit of a problem, as it happens often. Advice would be appreciated.
same problem
couldn't this problem be fixed by some registry entires ?
I mean to put an application into autostart shouldn't be a problem, well for me, as a hardcore newp it is acutally, but maybe not fo you guys
on my xperia x1 i've got the same problem .
large start menu
bommel0815 said:
...
now i have to find a way to start it automatically on reboot
...
Click to expand...
Click to collapse
Hi! at all!
Have you found a solution?
I tried to use very intereresting soft GSen but without success...After instalation and manually activation (by GSen.exe) it turns only File Explorer window or in case of activation from Programs it turns only Programs window. If I close File Explorer or Programs window it dosnt works...I tried many combination and settings - but without success. Do you have the same experience? Or any advice?
There are 3 files titled Gsen.exe I think... Make sure that if you open the shortcut twice, the second time it pops up a window saying "unload program?"... That's the right one. Also, when you open it, to confirm it's running there will be 1 white pixel at the very top center of the screen. I know for a fact it works on the Touch Pro, as I use it on mine. When it says "unload program" it's asking if you want to disable it, click yes if you don't want to use it anymore... Good luck.
Unfortunatelly a pixel signals that GSen is working...and sreens dont turn :-(
Jetra said:
Unfortunatelly a pixel signals that GSen is working...and sreens dont turn :-(
Click to expand...
Click to collapse
Hmmm... I know there was a config setting where you could choose what programs it does and doesn't work for, use the readme and just browse through the files to see what you can do. I can't say I tested it with a ton of applications, but I got like 3 or 4 to turn (and haven't used it since)... I'm a bigger fan of profile anyhow, I may as well have a Diamond with a memory card slot (excepting emails).
I have the same problem. I use the default configuration. So it should work, but it doesn't work. It just works with the program/window from which it was started.
I've already posted this problem in a German forum where the developer has a sub-forum, but I still didn't get an answer.
Sorry guys, we had an Raphael prototype device with AKU 1.3.1. and pre-alpha ROM for short time (testing time) in the past and it was working.
This is the reason why we wrote: Tested on HTC Raphael (Prototype)
On the basis of the missing new device and ROM, we are not able to check your problems.
Sorry again.
What a bummer! I hope you'll get a new device/ROM to test this soon ;-)
You are not alone with this kind of wishes.
Actually, there is just one VERY annoying problem with GSen 1.7 - it works for me (Touch Diamond, Dutty's 1.9) except onlyfor(1) - if this option is defined, windows are not recognized neither by class no by name or exe name... I believe this is not a matter of ROM, because I had this very problem on default ROM which I flashed to test if GSen will work... I also believe it could be not Diamond-specific...
CharlyV, could you please spend some time to find out if it's possible to resolve this?
Thanks in advance - I'm a loyal and official user of SKTools...
It doesn't work here either...
guys it even says so on gsen home page
Jetra said:
I tried to use very intereresting soft GSen but without success...After instalation and manually activation (by GSen.exe) it turns only File Explorer window or in case of activation from Programs it turns only Programs window. If I close File Explorer or Programs window it dosnt works...I tried many combination and settings - but without success. Do you have the same experience? Or any advice?
Click to expand...
Click to collapse
This hack does NOT work with the Touch Pro as the Touch Pro will base most of its screen rotation on the sliding keyboard instead.
Gsen automatical loading??
Hey guys.
I've got some beginner's questions.
My gsen doesn't start automatically when I start my Diamond.
Is it normal?
Is it possible to do anything?
Thanks.
place shortcut into Windows\Startup directory
CharlyV said:
You are not alone with this kind of wishes.
Click to expand...
Click to collapse
hi have loaded GSEN onto HTC touch HD and program worked well, i since put SPB plus and shell on and now GSEN wont work and also in the album section it wont allow finger scrolling. any ideas???
Folks,
Please post your issues here since the original thread is getting way too big.
Also, please post your fixes for possible minor issues, this will help new users until I update the rom.
Do not post any thing else in this thread besides issue related stuff.
Thanks,
1. When InCall Partial back button is displayed. ---- Posted by KidNamedAlbert
I finally got this one fixed and is working great, I will add this to the next update.
2. Battery meter not showing correctly.
This has been fixed as well and will be included in the next update.
FAQ
FAQ Section:
Read everything in this section before downloading the roms and flashing.
If you don't understand it, read it again and again until you understand.
Once your doned flashing your device double check back here again to configure your device.
I will not reply to any subjects already covered in this section.
I'm not trying to be rude, I'm just very busy with finishing up this project and also working on other projects.
Back up your phone before downloading and flashing this rom... I do not want anybody to loose their data due to flashing this rom, as the rom will erase all of your data...
How To Flash Rom
Download - HERALD-USPL-beta3
Mirror - by tiksister - rapidshare
How-To Flash the HERALD-USPL-beta3:
Download and extract both files.
Place the extracted OTP v7.1.nbh into the Herald-uspl-beta3/RUU folder.
Move the entire Herald-uspl-beta3 folder to the root of the c:\.
Follow the simple readme file.
Break down of how to flash this rom:
Then follow these steps:
II. How do I flash an NBH file?
a. USPL
Step 1. Download Herald-USPL-Beta3. http://www.megaupload.com/?d=A4N36HLO
Step 2. UnZIP the file into a folder on your Desktop. Let's call it "MyFirstROM" for simplicity's sake. Notice that there is a folder called RUU within this folder now. Keep that in mind.
Step 3. Download your NBH file and unZIP or unRAR it into that RUU folder. Make sure that that NBH file ends up in the RUU folder, not within a folder inside the RUU folder.
Step 4. Place your phone into flightmode.
Step 5. Go back to the MyFirstROM folder and then run USPL.exe
Step 6. Follow the directions on the screen. EXACTLY.
* Your screen on your cell phone will go white around the 75% part of the "second step" now.
* ActiveSync will LOOSE its connection.
Step 7. One step 3 on that black window, the RUU flasher will pop up. Just follow the steps.
That's it. Welcome to the flasher's world.
Instructions by Ivanmmj
===================================
If your device is already HARD-SPL read the following link before flashing.
HARD-SPL
======================
Disable Random Access and Enable Scrolling
With random access you must do the following to enable contact scrolling.
Click on the contacts button at the lower right hand side of the screen.
Click on the Menu button
Click on Options
Uncheck "Show alphabetical index
Click on the ok button to exit
Now I know the following will sound strange but it will enable scrolling in the contact menu.
Repeat the following steps again, and the random acess bar on the right handside will go away and scrolling will work again.
Click on the Menu button
Click on Options
Uncheck "Show alphabetical index
Click on the ok button to exit
If you want to enable random access, just go back and uncheck the "Show alphabetical index"
======================
How to turn off QuickMenu
/Start/QuickMenu/Exit
It will prompt you with "Exit QuickMenu?
Choose yes and it will not startup again even after a reboot.
Things to do after flashing your device:
Network Wizard
Go to \Start\Settings\Connections\Network Wizard
Choose your location and provider, do not reset the device when prompted.
Connections
Go to \Start\Settings\Connections\Connections
Once completed save and exit
Video on how to setup your device after flashing
MMS/SMS Setup
Send Large MMS:
Registry: HKLM\Software\Arcsoft\ArcSoft MMS UA\Config\UI\Size Limit
Key: wap2sendlimit1 (you can also change wap1sendlimit1)
Default: 307200
New Value: 1228800 (1200K)
Registry: HKLM\Software\Arcsoft\ArcSoft MMS UA\Config\UI\Size Limit
Key: sendlimit3 which will be set to the default of 300k. u gotta change it to 1228800 and than the 1200k will appear.
note u can also change sendlimit 2, 1 to be the same as what ever u decide to change wap * sendlimt* to be. once u do this the 1200k will appear.
++++in between doing the above and below, u have to go to
Set the new value by going to Text/Multimedia --> Menu --> New --> MMS --> Menu --> Options --> MMS Options --> Servers --> T-mobile MMS
=======================
Soft Keys
The calendar and contacts keys can be changed with the following steps.
/Settings/soft keys
Use this setting feature to change to what every programs you want.
========================
Show CIM contacts
By default it has been disabled so your CIM contacts will not display, use the following reg hacks to enable it.
[HKEY_CURRENT_USER\ControlPanel\Phone]
"ShowSIM"=dword:00000001
=========================
Show clock instead of battery
If you want to show the clock instead of the battery or the other way around, use the following reg hack.
Clock
[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell]
"ShowTitleBarClock"=dword:0
Change the current dword:0 to 1.
Battery
[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell]
"ShowTitleBarClock"=dword:1
Change the current dword:1 to 0.
==========================
M2DC
Just tried the M2DC theme manager on 7.3 Std, with a renamed .zip file to .m2dct file (specifically the KnobiSkin from the M2D skin thread).
First time, it locked up. M2DC continued with spinning icon until I forced a reboot. Touchflo was off after reboot, and after enabling it everything appeared to be the same.
Second attempt, I disabled Touchflo from today before applying the new theme. Got the "Applying Theme" prompt. After M2DC closed, I reactivated touchflow and new theme was applied.
Simple instruction for use of M2DC Themes on OTP 7.3:
Find a skin you like, download the zip file (not the cab),
Rename file to .m2dct,
Copy new file to the themes directory of the M2DC install directory,
Disable touchflo in Today settings
Start M2DC,
Go to themes tab (the first time it will back up the default theme),
Click the new theme then apply,
Restart touchflo.
Alternate for creating themes from skin CABs:
Run M2DC first, let it make the DefaultThemeBackup.m2dct file, Close M2DC.
Run the CAB skin of choice.
Rename DefaultThemeBackup.m2dct to OriginalTheme.m2dct (or anything else with same extension).
Rerun M2DC. It will detect no DefaultThemeBackup.m2dct and will ask to back up again. Let it make new backup. Close M2DC.
Rename new file to the name of the new theme.
Repeat for each skin CAB you wish to convert to m2dc theme file.
Note: The M2DCT files can be large (over 3Mb, 660 files backed up). Best to do this only if M2DC is installed on a large Storage card.
Note 2: Several times M2DC appeared to freeze when applying or backing up themes. It looks like it has problems if touchflo is not off prior to running. It does try to deactivate touchFlo then reactivate when done, but it doesn't appear to work flawlessly yet. It is better to deactivate the Today plugin before running M2DC on this ROM build.
Note 3: New mods to theme support in M2DC released today (Sept 30)
FAQ 2
Saving space for updates.
:::ONLY ONE ISSUE:::
When InCall Partial back button is displayed.
EVERYTHING else is easily fixable.
FAQ 3
Saving space for updates.
Using 7.3.1
1) Activesync is always on. Even after turning it off it restarts in background after some time.
2) Battery status icon on home page always shows full. Had to install a third party battery meter to show correct status.
Since this thread popped up i guess the issues i have that are notable.
1. activesync always re-opens im aware of a reg change that is possible to stop this but haven't been able to find it yet.
2. that back button when calling is REALLY annoying lol, someone needs to get/find a fix for that.
3. battery bars are inaccurate, i used one of the first things kidnamedalbert suggested and it works, until i soft reset the phone then it doesnt.
4. weather back round was first not alligned correctly, but it fixed itself after an install and uninstall of the feng shui theme.
5. still completely usable and i love this rom a lot
The fix that I have done:
* Using vistahide for battery status. Remove the today screen battery status icon using Schaps advance configurator.
What I can't fix:
* Half of backspace button is shown on call status screen. However if I lose the signal (happens very often in my apt ), the backspace button does not show.
Customizations, which may be useful for a few:
* Install vjbrisk to redirect calendar to thumbcal. After installation, rename vjbrisk.exe to calendar.exe, and rename a thumcal shortcut to vjtarget.lnk, then post the new calendar.exe and vjtarget.lnk in the \windows folder to redirect calendar to thumbcal.
* Reinstall newest google maps to main memory. It simply works after reinstallation.
my issue is when u flip the phone when its on the home screen it doesnt fit and it always goes back to portrait mode
I am having the landscape problem also, if it does flip to landscape it is cut off. Most the time it won't even flip!
I am having a problem with the Device lock, after a reboot the device lock works fine but once i unlock it...i can not lock it again. Which sucks because if i try to take it out of the belt clip when i am getting a call it always pushes the call to voicemail!
I was just about to search for these issues when i seen this new post. I'm going to search now...maybe someone from here will be in that search with the answers =)
damnitpud said:
I am having the landscape problem also, if it does flip to landscape it is cut off. Most the time it won't even flip!
I am having a problem with the Device lock, after a reboot the device lock works fine but once i unlock it...i can not lock it again. Which sucks because if i try to take it out of the belt clip when i am getting a call it always pushes the call to voicemail!
I was just about to search for these issues when i seen this new post. I'm going to search now...maybe someone from here will be in that search with the answers =)
Click to expand...
Click to collapse
for device lock, just lock your phone manually then unlock. DeviceLock SHOULD work now
kidnamedAlbert said:
for device lock, just lock your phone manually then unlock. DeviceLock SHOULD work now
Click to expand...
Click to collapse
Thats the thing i do try it manually, when i click on the Device Lock the phone beeps so i know i hit it but it never locks. I have tried using the shortcut under Accessories, tried putting a shortcut under Programs, I even went into the Windows folder and clicked Devicelock.exe. All of them do the same. i think it just might be corrupt. Can you up your devicelock.exe from your Windows folder?
damnitpud said:
Thats the thing i do try it manually, when i click on the Device Lock the phone beeps so i know i hit it but it never locks. I have tried using the shortcut under Accessories, tried putting a shortcut under Programs, I even went into the Windows folder and clicked Devicelock.exe. All of them do the same. i think it just might be corrupt. Can you up your devicelock.exe from your Windows folder?
Click to expand...
Click to collapse
you can't even get the device to lock by holding the end key? also where do i put the vistahide exe so i can launch it from the program launcher. i don't really want it to start on startup.
dude i mean by holding the end key! sorry for not being clear enough.
yeah that always happens to me. and i solve by holding end key and unlocking and DeviceLock works again
mcdavey said:
you can't even get the device to lock by holding the end key? also where do i put the vistahide exe so i can launch it from the program launcher. i don't really want it to start on startup.
Click to expand...
Click to collapse
Holding the End key worked! I didn't know about this, maybe i did just didn't remember, I'm not sure...it sounded familiar when you said it. Awesome Thanks for the tip!
hoolahoous said:
Using 7.3.1
1) Activesync is always on. Even after turning it off it restarts in background after some time.
2) Battery status icon on home page always shows full. Had to install a third party battery meter to show correct status.
Click to expand...
Click to collapse
The Same! With Version 7.3.1
And:
If I direct via Startmenu e.g. to the accessories folder and then want to go back, it sometimes happens, that it needs some minutes to show all Icons or hangs up!
PSShutXP doesn't safe the settings for an automatic reset!
And last:
If I want to add something to Programs Tab I have to press 2 times on the "+" Symbol on the button. the first time only the wait Symbol appears and fanishes, but nothing happens!
The same with adding weather and Contact
ruebyi
Heres an issue, when using a headset for music when you go to audio booster to try to change settings on the equalizer you CANT check the "On" Button. This was a problem with the STD version as well and thought that it was fixed in this release(OTP v7.3.1 TouchFlo 2D Final ) and it still isnt . Is my headset not compatible or is this just a bug with the software?
for me its google maps. when i had another rom on open touch biggy i believe it worked with the proxy last week. now it says i need data. yet my email works and the web doesnt on the opera anymore.
Abbens said:
for me its google maps. when i had another rom on open touch biggy i believe it worked with the proxy last week. now it says i need data. yet my email works and the web doesnt on the opera anymore.
Click to expand...
Click to collapse
have you tried updating google maps to main device? have you run the network wizard? also which version are you using?
Battery Bar!!
anyone notice that the battery bar doesnt go down even though it's like 50% already?
I'm not sure what happened, but I've been noticing that now when I boot up my VZW TP2, the launching touchflo 3d screen pops up, then goes away and there is nothing but a black background and the windows taskbar.
The black screen looks like a program with an all black background and no text/content, it has an X in the upper right hand corner and I can click that X to reveal TF3D.. I can also click anywhere on the screen and/or END key and reveal TF3D.
This happens at startup every time now.
Things I've done since I noticed the problem;
Installed HDBoobs
Installed Diamond Halogram w/ ATi Graphics Driver
Put HTCAPI.dll in the \windows\ directory
Installed .NET CF 3.5
Installed Schap's Registry Editor
Installed J.S. Advanced Configuration Tool 3.3
Installed Ilium Software Screen Capture
Installed Windows Live (newest version)
Installed Microsoft Facebook Application
Did '7MP Panorama' Tweak
Did 'Reveal 5 Hidden Camera Settings' Tweak
Things I've done after noticing the problem;
Installed Microsoft ICS
Installed Garmin MobileXT
Did 'Close Opera with X instead of minimize' registry mod
Did 'ResProxy ShareMemSize=0' registry mod
Installed NoPushInternet
EDIT 1:
I've now removed;
'ResProxy ShareMemSize=0' registry mod (slowed me down too much)
HDBoobs
Diamond Halogram w/ ATi Graphics Driver
Nothing has changed.
EDIT 2:
I had it setup to be password protected. After removing the password option and soft-resetting, the problem is gone. Is this a bug? Is there a fix for this? I know it seems minuscule, but this isn't how it should work and I want to fix it
I'd like to avoid doing a hard reset if possible.. so any advice, other than 'ignore it' would be appreciated.
I think that I have the same thing happening. I don't think that it was like this out of the box, but I'm not sure when it started. Basically, my phone loads showing the taskbar at the top and the two soft keys at the bottom. Everything in between is black. If I touch the screen, then the TouchFlo stuff shows up. After that, it's fine.
I do have a lock code enabled. It was forced by an Exchange Server policy. Not sure if this "issue" arose at that point or not.
I asked the same question here... http://forum.xda-developers.com/showthread.php?t=560636
Seems to be related to having the PIN lock enabled. I too am required to use this for work reasons, and have not found a way to get TF3D to display on boot up without having to touch the screen.
SecretAgentMan said:
I think that I have the same thing happening. I don't think that it was like this out of the box, but I'm not sure when it started. Basically, my phone loads showing the taskbar at the top and the two soft keys at the bottom. Everything in between is black. If I touch the screen, then the TouchFlo stuff shows up. After that, it's fine.
I do have a lock code enabled. It was forced by an Exchange Server policy. Not sure if this "issue" arose at that point or not.
Click to expand...
Click to collapse
This is exactly what is happening to mine..
Sublimedelta9 said:
I asked the same question here... http://forum.xda-developers.com/showthread.php?t=560636
Seems to be related to having the PIN lock enabled. I too am required to use this for work reasons, and have not found a way to get TF3D to display on boot up without having to touch the screen.
Click to expand...
Click to collapse
At least we're not alone.. now it's a known issue, hopefully someone will look further into it (since I don't know how to fix it)
-mak
Here too
First I installed XDA shutdown to perform soft resets. Then the memmaid demo to further my efforts to be clean & mean. Just installed s-k-tools to my HTC Sprint Touch Pro 2 (because memmaid demo misreported my memory!)and after running clean I'm getting cprog.exe & sktools.exe errors and now "bluetooth stack failed to load" -my friggin bluetooth wont load. Only other non stock thing is Duttys disable push internet. Did I make a mistake in purchasing this tweakware? Can I rectify these situations without a hard reset? Somewhere along the way the black screen thing occurred too.
Grindscorelink said:
First I installed XDA shutdown to perform soft resets. Then the memmaid demo to further my efforts to be clean & mean. Just installed s-k-tools to my HTC Sprint Touch Pro 2 (because memmaid demo misreported my memory!)and after running clean I'm getting cprog.exe & sktools.exe errors and now "bluetooth stack failed to load" -my friggin bluetooth wont load. Only other non stock thing is Duttys disable push internet. Did I make a mistake in purchasing this tweakware? Can I rectify these situations without a hard reset? Somewhere along the way the black screen thing occurred too.
Click to expand...
Click to collapse
Do you have a password-required device lock setup? If so, and you're getting the black-screen issue just after you unlock your phone when you first boot it up (from an off state), then you're probably in the same boat as us..
-mak
Same issue here.... yes I have a PIN lock code.
brent372 said:
Same issue here.... yes I have a PIN lock code.
Click to expand...
Click to collapse
interesting. I don't have the code, and I've never seen this. Then again other software installed might make a difference.
WTF is HDBoobs?
LOL... I had the same question.
Believe it or not . . .
http://www.freewarepocketpc.net/ppc-download-hdboobs.html