Folks,
Please post your issues here since the original thread is getting way too big.
Also, please post your fixes for possible minor issues, this will help new users until I update the rom.
Do not post any thing else in this thread besides issue related stuff.
Thanks,
1. When InCall Partial back button is displayed. ---- Posted by KidNamedAlbert
I finally got this one fixed and is working great, I will add this to the next update.
2. Battery meter not showing correctly.
This has been fixed as well and will be included in the next update.
FAQ
FAQ Section:
Read everything in this section before downloading the roms and flashing.
If you don't understand it, read it again and again until you understand.
Once your doned flashing your device double check back here again to configure your device.
I will not reply to any subjects already covered in this section.
I'm not trying to be rude, I'm just very busy with finishing up this project and also working on other projects.
Back up your phone before downloading and flashing this rom... I do not want anybody to loose their data due to flashing this rom, as the rom will erase all of your data...
How To Flash Rom
Download - HERALD-USPL-beta3
Mirror - by tiksister - rapidshare
How-To Flash the HERALD-USPL-beta3:
Download and extract both files.
Place the extracted OTP v7.1.nbh into the Herald-uspl-beta3/RUU folder.
Move the entire Herald-uspl-beta3 folder to the root of the c:\.
Follow the simple readme file.
Break down of how to flash this rom:
Then follow these steps:
II. How do I flash an NBH file?
a. USPL
Step 1. Download Herald-USPL-Beta3. http://www.megaupload.com/?d=A4N36HLO
Step 2. UnZIP the file into a folder on your Desktop. Let's call it "MyFirstROM" for simplicity's sake. Notice that there is a folder called RUU within this folder now. Keep that in mind.
Step 3. Download your NBH file and unZIP or unRAR it into that RUU folder. Make sure that that NBH file ends up in the RUU folder, not within a folder inside the RUU folder.
Step 4. Place your phone into flightmode.
Step 5. Go back to the MyFirstROM folder and then run USPL.exe
Step 6. Follow the directions on the screen. EXACTLY.
* Your screen on your cell phone will go white around the 75% part of the "second step" now.
* ActiveSync will LOOSE its connection.
Step 7. One step 3 on that black window, the RUU flasher will pop up. Just follow the steps.
That's it. Welcome to the flasher's world.
Instructions by Ivanmmj
===================================
If your device is already HARD-SPL read the following link before flashing.
HARD-SPL
======================
Disable Random Access and Enable Scrolling
With random access you must do the following to enable contact scrolling.
Click on the contacts button at the lower right hand side of the screen.
Click on the Menu button
Click on Options
Uncheck "Show alphabetical index
Click on the ok button to exit
Now I know the following will sound strange but it will enable scrolling in the contact menu.
Repeat the following steps again, and the random acess bar on the right handside will go away and scrolling will work again.
Click on the Menu button
Click on Options
Uncheck "Show alphabetical index
Click on the ok button to exit
If you want to enable random access, just go back and uncheck the "Show alphabetical index"
======================
How to turn off QuickMenu
/Start/QuickMenu/Exit
It will prompt you with "Exit QuickMenu?
Choose yes and it will not startup again even after a reboot.
Things to do after flashing your device:
Network Wizard
Go to \Start\Settings\Connections\Network Wizard
Choose your location and provider, do not reset the device when prompted.
Connections
Go to \Start\Settings\Connections\Connections
Once completed save and exit
Video on how to setup your device after flashing
MMS/SMS Setup
Send Large MMS:
Registry: HKLM\Software\Arcsoft\ArcSoft MMS UA\Config\UI\Size Limit
Key: wap2sendlimit1 (you can also change wap1sendlimit1)
Default: 307200
New Value: 1228800 (1200K)
Registry: HKLM\Software\Arcsoft\ArcSoft MMS UA\Config\UI\Size Limit
Key: sendlimit3 which will be set to the default of 300k. u gotta change it to 1228800 and than the 1200k will appear.
note u can also change sendlimit 2, 1 to be the same as what ever u decide to change wap * sendlimt* to be. once u do this the 1200k will appear.
++++in between doing the above and below, u have to go to
Set the new value by going to Text/Multimedia --> Menu --> New --> MMS --> Menu --> Options --> MMS Options --> Servers --> T-mobile MMS
=======================
Soft Keys
The calendar and contacts keys can be changed with the following steps.
/Settings/soft keys
Use this setting feature to change to what every programs you want.
========================
Show CIM contacts
By default it has been disabled so your CIM contacts will not display, use the following reg hacks to enable it.
[HKEY_CURRENT_USER\ControlPanel\Phone]
"ShowSIM"=dword:00000001
=========================
Show clock instead of battery
If you want to show the clock instead of the battery or the other way around, use the following reg hack.
Clock
[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell]
"ShowTitleBarClock"=dword:0
Change the current dword:0 to 1.
Battery
[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell]
"ShowTitleBarClock"=dword:1
Change the current dword:1 to 0.
==========================
M2DC
Just tried the M2DC theme manager on 7.3 Std, with a renamed .zip file to .m2dct file (specifically the KnobiSkin from the M2D skin thread).
First time, it locked up. M2DC continued with spinning icon until I forced a reboot. Touchflo was off after reboot, and after enabling it everything appeared to be the same.
Second attempt, I disabled Touchflo from today before applying the new theme. Got the "Applying Theme" prompt. After M2DC closed, I reactivated touchflow and new theme was applied.
Simple instruction for use of M2DC Themes on OTP 7.3:
Find a skin you like, download the zip file (not the cab),
Rename file to .m2dct,
Copy new file to the themes directory of the M2DC install directory,
Disable touchflo in Today settings
Start M2DC,
Go to themes tab (the first time it will back up the default theme),
Click the new theme then apply,
Restart touchflo.
Alternate for creating themes from skin CABs:
Run M2DC first, let it make the DefaultThemeBackup.m2dct file, Close M2DC.
Run the CAB skin of choice.
Rename DefaultThemeBackup.m2dct to OriginalTheme.m2dct (or anything else with same extension).
Rerun M2DC. It will detect no DefaultThemeBackup.m2dct and will ask to back up again. Let it make new backup. Close M2DC.
Rename new file to the name of the new theme.
Repeat for each skin CAB you wish to convert to m2dc theme file.
Note: The M2DCT files can be large (over 3Mb, 660 files backed up). Best to do this only if M2DC is installed on a large Storage card.
Note 2: Several times M2DC appeared to freeze when applying or backing up themes. It looks like it has problems if touchflo is not off prior to running. It does try to deactivate touchFlo then reactivate when done, but it doesn't appear to work flawlessly yet. It is better to deactivate the Today plugin before running M2DC on this ROM build.
Note 3: New mods to theme support in M2DC released today (Sept 30)
FAQ 2
Saving space for updates.
:::ONLY ONE ISSUE:::
When InCall Partial back button is displayed.
EVERYTHING else is easily fixable.
FAQ 3
Saving space for updates.
Using 7.3.1
1) Activesync is always on. Even after turning it off it restarts in background after some time.
2) Battery status icon on home page always shows full. Had to install a third party battery meter to show correct status.
Since this thread popped up i guess the issues i have that are notable.
1. activesync always re-opens im aware of a reg change that is possible to stop this but haven't been able to find it yet.
2. that back button when calling is REALLY annoying lol, someone needs to get/find a fix for that.
3. battery bars are inaccurate, i used one of the first things kidnamedalbert suggested and it works, until i soft reset the phone then it doesnt.
4. weather back round was first not alligned correctly, but it fixed itself after an install and uninstall of the feng shui theme.
5. still completely usable and i love this rom a lot
The fix that I have done:
* Using vistahide for battery status. Remove the today screen battery status icon using Schaps advance configurator.
What I can't fix:
* Half of backspace button is shown on call status screen. However if I lose the signal (happens very often in my apt ), the backspace button does not show.
Customizations, which may be useful for a few:
* Install vjbrisk to redirect calendar to thumbcal. After installation, rename vjbrisk.exe to calendar.exe, and rename a thumcal shortcut to vjtarget.lnk, then post the new calendar.exe and vjtarget.lnk in the \windows folder to redirect calendar to thumbcal.
* Reinstall newest google maps to main memory. It simply works after reinstallation.
my issue is when u flip the phone when its on the home screen it doesnt fit and it always goes back to portrait mode
I am having the landscape problem also, if it does flip to landscape it is cut off. Most the time it won't even flip!
I am having a problem with the Device lock, after a reboot the device lock works fine but once i unlock it...i can not lock it again. Which sucks because if i try to take it out of the belt clip when i am getting a call it always pushes the call to voicemail!
I was just about to search for these issues when i seen this new post. I'm going to search now...maybe someone from here will be in that search with the answers =)
damnitpud said:
I am having the landscape problem also, if it does flip to landscape it is cut off. Most the time it won't even flip!
I am having a problem with the Device lock, after a reboot the device lock works fine but once i unlock it...i can not lock it again. Which sucks because if i try to take it out of the belt clip when i am getting a call it always pushes the call to voicemail!
I was just about to search for these issues when i seen this new post. I'm going to search now...maybe someone from here will be in that search with the answers =)
Click to expand...
Click to collapse
for device lock, just lock your phone manually then unlock. DeviceLock SHOULD work now
kidnamedAlbert said:
for device lock, just lock your phone manually then unlock. DeviceLock SHOULD work now
Click to expand...
Click to collapse
Thats the thing i do try it manually, when i click on the Device Lock the phone beeps so i know i hit it but it never locks. I have tried using the shortcut under Accessories, tried putting a shortcut under Programs, I even went into the Windows folder and clicked Devicelock.exe. All of them do the same. i think it just might be corrupt. Can you up your devicelock.exe from your Windows folder?
damnitpud said:
Thats the thing i do try it manually, when i click on the Device Lock the phone beeps so i know i hit it but it never locks. I have tried using the shortcut under Accessories, tried putting a shortcut under Programs, I even went into the Windows folder and clicked Devicelock.exe. All of them do the same. i think it just might be corrupt. Can you up your devicelock.exe from your Windows folder?
Click to expand...
Click to collapse
you can't even get the device to lock by holding the end key? also where do i put the vistahide exe so i can launch it from the program launcher. i don't really want it to start on startup.
dude i mean by holding the end key! sorry for not being clear enough.
yeah that always happens to me. and i solve by holding end key and unlocking and DeviceLock works again
mcdavey said:
you can't even get the device to lock by holding the end key? also where do i put the vistahide exe so i can launch it from the program launcher. i don't really want it to start on startup.
Click to expand...
Click to collapse
Holding the End key worked! I didn't know about this, maybe i did just didn't remember, I'm not sure...it sounded familiar when you said it. Awesome Thanks for the tip!
hoolahoous said:
Using 7.3.1
1) Activesync is always on. Even after turning it off it restarts in background after some time.
2) Battery status icon on home page always shows full. Had to install a third party battery meter to show correct status.
Click to expand...
Click to collapse
The Same! With Version 7.3.1
And:
If I direct via Startmenu e.g. to the accessories folder and then want to go back, it sometimes happens, that it needs some minutes to show all Icons or hangs up!
PSShutXP doesn't safe the settings for an automatic reset!
And last:
If I want to add something to Programs Tab I have to press 2 times on the "+" Symbol on the button. the first time only the wait Symbol appears and fanishes, but nothing happens!
The same with adding weather and Contact
ruebyi
Heres an issue, when using a headset for music when you go to audio booster to try to change settings on the equalizer you CANT check the "On" Button. This was a problem with the STD version as well and thought that it was fixed in this release(OTP v7.3.1 TouchFlo 2D Final ) and it still isnt . Is my headset not compatible or is this just a bug with the software?
for me its google maps. when i had another rom on open touch biggy i believe it worked with the proxy last week. now it says i need data. yet my email works and the web doesnt on the opera anymore.
Abbens said:
for me its google maps. when i had another rom on open touch biggy i believe it worked with the proxy last week. now it says i need data. yet my email works and the web doesnt on the opera anymore.
Click to expand...
Click to collapse
have you tried updating google maps to main device? have you run the network wizard? also which version are you using?
Battery Bar!!
anyone notice that the battery bar doesnt go down even though it's like 50% already?
Related
I've come to notice that no one REALLY knew how to fully disable screen rotation on WM devices.
Some offered 3rd party apps to get the job done, some only knew how to disable automatic rotation, but when the device went into standby and woke up again - the screen rotated back. So that didnt really work.
So if you're as desperate as i was about screen rotation,
this is what you need to do:
1. Get dotfred's free taskmanager HERE, and run it.
2. Go to "Devices" tab, and look for "MIS1:" device (oem_misc.dll)
3. Long-Tap on it, and tap on "Stop"
4. Long-Tap on it again, and now choose "Set Manual"
EDIT: This should be enough. try flipping your screen/sliding your keyboard and see if the screen changes orientation.
Now put your device on standby, and turn it on again. If orientation stays the same - you're done. If not - try steps 5-7, although they seem to be irrelevant.
5. Go to "Notifications" tab, and look for "Notifications\NamedEvents\VCPowerWakeupEvent"
6. Tap on it to make it selected
7. Disable it
(In dotfred's taskmanager, there should be a button for disabling it, but for some reason some devices couldn't see the button icons, although the buttons are still clickable. Under the notifications list there is an empty light-blue line - the buttons are there, eventough you can't see them.
The disable buttons is somewhere i the middle of that light-blue line, just tap the center until a message box popps up and asks if you'd like to disable this notification - Tap on yes.)All those steps are a one time deal - they stick even after an SR.
This has been tested on htc universal and works great.
The screen will keep its orientation even if you flip your screen, take out your built in keyboard, or turn the device off and back on.
The only time your screen will revert back to the original orientation is when you soft reset your device.
Hope this helps
So now, if you need something to help you rotate your screen on demand, you could use this small app that i've made.
its called ScreenRotate.exe (naturally), and you use it like this:
usage: ScreenRotate.exe <command line argument>
0 : Rotete to angle 0
90 : Rotete to angle 90
180 : Rotete to angle 180
270 : Rotete to angle 270
CW : Rotate clockwise
CCW : Rotate counter-clockwise
MIRROR : Mirror the current angle
If nothing will be specified at command line, nothing will happen.
.NET CF 2 is needed.
I really recommend using it along with FTouchFlo.
This way, to rotate the screen manually, you just need to drag your finger the way you want the screen to be shown, from top to bottom.
I find it quite comfortable while driving...
Those are the changes you'd need to change in FTouchFlo to make it work with ScreenRotate:
DownUpApp:\Program Files\FTouchFlo\ScreenRotate.exe
DownUpAppCmdLine:mirror
LeftRightApp:\Program Files\FTouchFlo\ScreenRotate.exe
LeftRightAppCmdLine:cw
RightLeftApp:\Program Files\FTouchFlo\ScreenRotate.exe
RightLeftAppCmdLine:ccw
Thank you so much... I have been looking for this for sooo long.
This is the perfec way to make it stick in either Portrait / Landscape.
There have been many users such as myself who have wanted our devices to stay in landscape and this is the perfect hack.
Thanks again... Cheers
BTW -> Tested and works on my Hermes
Just added it to the Hermes Wiki (Can be found under regisrty tweaks although it's not a reg tweak)
happy to hear that!
you're welcome mate.
I have a tytn hermes with satin black and in the notifications tab there isn't any notification named "Notifications\NamedEvents\VCPowerWakeupEvent". I have searched in the notifications tab in task manager and also in the notification queue in memaid. So when i soft reset the device everything goes back where it was (auto rotate screen). Any help? Thank's
EDIT: It is working perfectly even without this notification. I just tested it. So everything OK! ThanX again
zalaros said:
I have a tytn hermes with satin black and in the notifications tab there isn't any notification named "Notifications\NamedEvents\VCPowerWakeupEvent". I have searched in the notifications tab in task manager and also in the notification queue in memaid. So when i soft reset the device everything goes back where it was (auto rotate screen). Any help? Thank's
EDIT: It is working perfectly even without this notification. I just tested it. So everything OK! ThanX again
Click to expand...
Click to collapse
actually, you're right.
i guess the notification has nothing to do with it,
i don't remember what made me think it does.
i'll edit the hack accordingly.
thanx zalaros
Unfortunatelly I have found 2 bugs. I have a tytn hermes with black satin medium installed. The first bug is that with mis1 unloaded the device can not connect with the pc anymore. When I plug the device it is just being charged but active sync won't open at all. The second bug is that I can not load mis1 again. No matter what I have tried the device mis1 won't be loaded again if I had unloaded it. Any ideas?
Ok i found a way to reload this specific device (mis1).
1. Run taskmanager.
2. Go to "Devices" tab, and look for "MIS1:" device (oem_misc.dll) (it is unloaded if you have done everything described on the 1st post)
3. Long-Tap on it, and choose "Set Manual"
4. Long-Tap on it again, and choose "Set Automatic"
5. Soft reset your device
zalaros said:
Unfortunatelly I have found 2 bugs. I have a tytn hermes with black satin medium installed. The first bug is that with mis1 unloaded the device can not connect with the pc anymore. When I plug the device it is just being charged but active sync won't open at all. The second bug is that I can not load mis1 again. No matter what I have tried the device mis1 won't be loaded again if I had unloaded it. Any ideas?
Click to expand...
Click to collapse
I have the same syncing problem
Doesn't seem to work on my Tilt/Kaiser-Dutty 6.0..
Any other ideas?
redlynr said:
I have the same syncing problem
Click to expand...
Click to collapse
Just solved!
The ActiveSync troubleshooter (menu: Help/Troubleshooter for ActiveSync) offered to clear the "Enable advanced network functionality" check box. While trying to do that, an error message "Failed to disable RNDIS ..." was popping up every time. As per this suggestion, I removed virtual COM ports from Bluetooth settings and then it was possible to clear that check box.
Immediately thereafter ActiveSync woke up on the PC and offered to create a new partnership (because I deleted everything in frustration earlier). No problems for half a hour.
Then I left the administrator account and logged on as the usual limited user. ActiveSync again was unable to connect until the advanced functionality check box was restored. Does it seem that those both accounts will require different settings? Dunno, I haven't checked yet.
On my Wizard, with the TNT Rom (August 08), I don't see the device MIS1, and I don't see the event in the TaskManager.
Any ideas how to disable screen rotation, when I slide the keyboard?
Thanks in advance
Sprint HTC Touch Pro ROM 1.03.651.4
The MIS1 solution did not work for my phone (Sprint HTC Touch Pro ROM 1.03.651.4), but I found that this does:'
HKLM\System\GDI\Rotation\CamAppActive = 1
Presumably the device thinks the camera is active and thus doesn't rotate the display.
Obviously this will return to 0 after soft reset, so I used TaskMgr 2.9 to export the entry, then added a startup shortcut to import this entry with the /silent flag.
UPDATE: This fix interferes with data entry in Opera. When I try to type into a google search box, I get one character, the box looses focus, and I gotta tap on it again to type any more. Severely annoying. Goes back to normal when I change CamAppActive back to 0, and close and reopen the keyboard. I may make an exe to toggle or just make two reg import shortcuts.
Way cool!
Works for me too on a Kaiser, with old Dutty ROM.
How in the world did you figure it out? Look at that key?
Thanks, Jeff
It made perfect sense, but admittedly I tried changing everything under "Rotation" before I tried that one.
Item #21 on this list clued me into that area of the registry:
http://forum.xda-developers.com/showthread.php?t=398265
El Zilcho.
Bupkis. I've been knocking my brains out trying to disable autorotation, but still have manual enabled. (I've got some apps that play nice only in landscape, and some only like portrait. Also, I'd like to be able to slide my keyboard out really quick-like to enter some quick text, then slide it back w/o messing with screen orientation.) I tried the MIS1 disable, but no-go for me. Also tried messing with the Rotation entries, specifically the SlideKey key, but apparently that value is volatile and changes with each slide. Oh well! Unless there's a way to lock the SlideKey value so it can't be changed, that'd fix my issue. Hmm.
EDIT: Forgot to mention. I've got the Tilt (8900 I guess?) with vanilla OEM 6.1 ROM, modded only for no-bloat. (Did the old battery trick after reset/reinstall to prevent bloatware.)
EDIT: After I typed this up, figured I'd try using Settings>Screen (or somesuch) to just fix perspective. Still auto-rotates. KaiserTweak and Advanced Config can't get it to stick on one or the either, either. Editing registry turns up same results. Settings right now say it's fixed at 0 degrees but it still autorotates.
Late-breaking edit, 14-JUN-10: Got rid of it a few months ago anyways, moved to a Rhodium. No D-pad, so no more worries about those games that didn't like rotation, as they needed the D-pad to work anyways, and the TP2 doesn't have one.
Doesn't work on touch pro 2
http://forum.xda-developers.com/showthread.php?p=5928161#post5928161
That's what I resorted to!
Wow
Wow, pretty hard core fix! On the Sprint Touch Pro 2 Stock 6.1 my reg entry above only works to prevent rotation when the keyboard is slid out, it will not help with the autorotation provided by the sensor. I however put together some .reg files, with my perceived essential fixes including disabling sensor rotation:
http://forum.xda-developers.com/showthread.php?t=651166
So, following post 'step by step' didn't change anything with my screen rotation settings. still automatically rotates all the time when I don't want it too...really frustrating. This is about the 4th hack I've tried with no success. Does anyone know what the proper solution is for the HTC Rhodium? I'm running stock AT&T Tilt 2 Rom WM 6.5.
I know there are programs you can install to take over rotation control...I'm just looking for a reg change or service hack or something to stop auto rotate from ever happening.
Thanks to anyone who knows the answer!!
After a few hours of hard resets and cursing I finally got HTC Home and HideLogo to play together in a manner that didn't produce reset loops and loud roommate annoying expletives . Check out my article on The Mobile Underground for a step by step and pic!
http://themobileunderground.com/2008/05/18/hidelogo-and-htc-home/
***UPDATE*** I've updated the version of HTC Home included in the .zip file, now not only does it not show the two battery icons, it doesn't mess with the vibrate switch, and is completely customizable with HHC :-D!
Hello! Can anybody upload the file you downloaded to another location? It seems that the download link in the page posted is not valid anymore
I really would like to test this hehe Thanks a lot!
Updated! Sorry 'bout that! Hadda update the URL for the new .zip.
Thank you very much!
The download link is not valid. Is it hosted somewhere else?
Ok, redid the link again, not sure what the problem was, still getting used to the backend on TMU...enjoy! (again heh)
keeps resetting for me and i triple checked everything. Will reset and try again. its possible total commander doesnt save how i thought it would. I just exited the program after doing the changes. Then did a soft reset.
I switched to PHM registry editor and still no luck. grrr. will keep trying.
tried it a third time and still keeps resetting.
One of the things that I found very important was to verify that Htc home plug is #4 or #5 in the "order" and there are no order duplicates...also really important. You can ignore level 0, make Dial Lookup Order 1, Active Call Order 2, Hide Logo order 3 and HTC Home order 4, make sure HTC home is type 4
Im gonna try it 1 more time before bed. After I verified 1-4 i went back and made the others 5-13. Is that correct, or should I do the others 14-22? I did it both ways but the first time was with total commander which I think sucks as a reg editor.
Only other thing i had trouble with was with hidelogo, there is no order value in there. So what I did was made a new DWORD value and put in the correct value of 3. Thought this was how you did it but im not 100% sure.
I use PHM registry editor. The order of the other plugins doesnt matter so much as long as there are no duplicates. Hidelogo should start out with an order, usually 32. Also make sure you're checking the "hide lookup field" on the menu on the homescreen.
I switched to PHM too so thats not the problem. Also I do check off hide lookup field just like your instructions say on step 4.
Just tried to do it again and its still resetting. For some reason my hidelogo does not have an entry for Order. I have to create a new value for it. I dont want to give up on it but ive spent a few hours now trying it and still nothing.
To update:
I am able to see the value Order now in hidelogo. The problem was once hidelogo was installed, it wasnt actually doing anything. I had to go to today menu and uncheck it, then recheck it. That made the logos go away. Then I am able to see Order 32 in the reg editor. However that still did not make it work for me. Im going on my 5th attempt now.
Psyber,
Thank you so much for this great guide. I did get it working. The only thing i did different was between steps 2 and 3.
After installing hidelogo.cab i made sure it was actually working. It wasnt, so i went and unchecked it in today settings, then checked it again. After that no more logos. At this point i followed the guide exactly. I think this was my only problem, and why it never worked.
Now im still stumped by the 2 battery icons on the today screen. that is still there. Psyber, can you post a link to the cab to get rid of the second battery icon? I have the Title Bar Clock enabled and its still there on the home screen, but it does get rid of it everywhere else, which is nice.
hmm...
Can't seem to download the file mate
can you please post the instructions and file somewhere? The link doesn't work anymore...
Please reupload the instructions. I keep on having the problem with reset after install Hidelogo.
Thanks
1. Install sdkcerts.cab
2. Install hidelogo.cab
3. Install HTC Home Plugin (if asked to soft reset after install, DONT!) If it doesn’t show up on the today screen yet, don’t worry, it will after soft reset.
4. On today screen, check menu, preferences, Hide Lookup Field
5. Fire up your favorite registry editor and make the following changes (or verify they match):
HKLM\Software\Microsoft\Today\Items\Active Call
Enabled 1, Options 1, Order 2, Selectability 2, Type 5
HKLM\Software\Microsoft\Today\Items\Dial Lookup
Enabled 1, Hidden 1, Options 0, Order 1, Selectability 2, Type 5
HKLM\Software\Microsoft\Today\Items\hidelogo
Enabled 1, Options 0, Order 3, Selectability 2, Type 4
HKLM\Software\Microsoft\Today\Items\HTC Home
Enabled 1, Options 0, Order 4, Selectability 2, Type 4
6. Browse all of the other entries in HKLM\Software\Microsoft\Today\Items
Verify that no other entries occupy “Order” 1-4.
If anything else occupies one of those entries, change the order, starting with 14…15…etc.
7. Soft reset
Enjoy!!
I think this is what I found from google cache ages ago.
Thanks for the instruction Zocster. It work great
I just got my fuze and have a few questions:
1) What is the easiest way to get push gmail on here? Is it through IMAP idle?
2) How can I adjust the memory usage so that most of my storage memory is used for current program memory (RAM) as I have a 4gb MicroSD card in there?
3) I've been able to disable the PTT button through the registry, but is there any known way to make it a dedicated button for camera, connection settings, etc?
4) How can I change it so that the whole d-pad and 4 buttons under the screen light up via sensor or at least don't shut off as fast?
5) Is there a way to disable the annoying keyboard that comes up on screen when in landscape mode (e.g. like when in a text input box in a browser window)
6) Is there a way to change the items that are listed under the internet touchflo tab?
7) How can I change the location of the images that are pulled in the photo/videos tab for the flip thru? Like I have customized folders on my memory card that I want it to see for the images.
8) What is the easiest way to autofill a recipient for text messages? I seem to be getting inconsistencies when I hit either enter, down, d-pad down, or d-pad center. Sometimes it autofills it, sometimes it goes to the message entry box and other times it pulls up the phonebook.
9) I did that customize your battery icons *.cab by someone on here and it mad it so that I always have a plugged in icon up top instead of a battery or a percentage. I can't find the *.dll to remove... Any tips?
Thanks, everyone!
Wow, that's a lot of questions that search can answer for you.
How can I adjust the memory usage so that most of my storage memory is used for current program memory (RAM) as I have a 4gb MicroSD card in there?
Click to expand...
Click to collapse
The internal storage should be used for installing all applications on. The Memory expantion card should only be used to store cab's, music, pictures, video's etc. It should not be used to run any applications from, it's just too slow.
hah2110 said:
I just got my fuze and have a few questions:
1) What is the easiest way to get push gmail on here? Is it through IMAP idle?
2) How can I adjust the memory usage so that most of my storage memory is used for current program memory (RAM) as I have a 4gb MicroSD card in there?
3) I've been able to disable the PTT button through the registry, but is there any known way to make it a dedicated button for camera, connection settings, etc?
4) How can I change it so that the whole d-pad and 4 buttons under the screen light up via sensor or at least don't shut off as fast?
5) Is there a way to disable the annoying keyboard that comes up on screen when in landscape mode (e.g. like when in a text input box in a browser window)
6) Is there a way to change the items that are listed under the internet touchflo tab?
7) How can I change the location of the images that are pulled in the photo/videos tab for the flip thru? Like I have customized folders on my memory card that I want it to see for the images.
8) What is the easiest way to autofill a recipient for text messages? I seem to be getting inconsistencies when I hit either enter, down, d-pad down, or d-pad center. Sometimes it autofills it, sometimes it goes to the message entry box and other times it pulls up the phonebook.
9) I did that customize your battery icons *.cab by someone on here and it mad it so that I always have a plugged in icon up top instead of a battery or a percentage. I can't find the *.dll to remove... Any tips?
Thanks, everyone!
Click to expand...
Click to collapse
The only thing I was KIND OF able to find an answer to is the gmail issue. I apologize if you are able to find something I'm not. I don't know what to search for for the other things... Could you maybe point me in the right direction?
hah2110 said:
I just got my fuze and have a few questions:
6) Is there a way to change the items that are listed under the internet touchflo tab?
Thanks, everyone!
Click to expand...
Click to collapse
Install this
http://forum.xda-developers.com/showthread.php?t=405749
What did you find out on the gmail? I havent been able to really find anything either.
hondaguyjoe said:
Install this
http://forum.xda-developers.com/showthread.php?t=405749
What did you find out on the gmail? I havent been able to really find anything either.
Click to expand...
Click to collapse
Someone developed some push settings that can be installed as a service on the device but you have to start the background service every time you restart the phone.
Also - Is it normal that when an alarm or notification (like with the calendar) goes off, there is no pop up notification? I have to actually click the little alarm icon... Kind of annoying?
Not sure on the alarm thing I hate WM alarm I use SPB Clock its got a great alarm on it. Let me know if your "interested" in it.
Can you give me a link on where I can find this push service? I hardly ever rest my phone so thats fine with me
hondaguyjoe said:
Not sure on the alarm thing I hate WM alarm I use SPB Clock its got a great alarm on it. Let me know if your "interested" in it.
Can you give me a link on where I can find this push service? I hardly ever rest my phone so thats fine with me
Click to expand...
Click to collapse
I'm very interested in SPB. Can you PM me about it?
http://www.codeplex.com/ImapPusherService
Hey - Do you know how I can add a YouTube shortcut to the program launcher or start menu? Right now, the *.exe is just in the Windows folder.
hah2110 said:
I just got my fuze and have a few questions:
1) What is the easiest way to get push gmail on here? Is it through IMAP idle?
2) How can I adjust the memory usage so that most of my storage memory is used for current program memory (RAM) as I have a 4gb MicroSD card in there?
3) I've been able to disable the PTT button through the registry, but is there any known way to make it a dedicated button for camera, connection settings, etc?
4) How can I change it so that the whole d-pad and 4 buttons under the screen light up via sensor or at least don't shut off as fast?
5) Is there a way to disable the annoying keyboard that comes up on screen when in landscape mode (e.g. like when in a text input box in a browser window)
6) Is there a way to change the items that are listed under the internet touchflo tab?
7) How can I change the location of the images that are pulled in the photo/videos tab for the flip thru? Like I have customized folders on my memory card that I want it to see for the images.
8) What is the easiest way to autofill a recipient for text messages? I seem to be getting inconsistencies when I hit either enter, down, d-pad down, or d-pad center. Sometimes it autofills it, sometimes it goes to the message entry box and other times it pulls up the phonebook.
9) I did that customize your battery icons *.cab by someone on here and it mad it so that I always have a plugged in icon up top instead of a battery or a percentage. I can't find the *.dll to remove... Any tips?
Thanks, everyone!
Click to expand...
Click to collapse
I think you should start by installing advanced configuration tool by Schaps, that will allow you to do amny of the things you listed, and allows remapping of keys, and has a touchflo configuration tool. It won't solve all your problems but it's a start.
As for gmail, i'd check out a beta software available from a company called Seven who make xpressmail for AT&T. Their beta software supports AOL, Yahoo, Gmail, Hotmail, & work email systems for push features. IT's pretty nice. Make sure you get their beta software. I'm using it on my tilt right now, i'll be checking it on my Fuze this afternoon when i get to the store to buy one.
locat the folder its in copy it go to the program files folder and paste a shortcut Rename it if you want. Then add it like you would any other one in the list.
I will PM you when I get home.
hondaguyjoe said:
locat the folder its in copy it go to the program files folder and paste a shortcut Rename it if you want. Then add it like you would any other one in the list.
I will PM you when I get home.
Click to expand...
Click to collapse
The shortcut didnt work. I created it in the my device -> programs folder (which had all subfolders in it) but it doesnt show in the touchflo programs launcher or the menu settings where i can add stuff to the programs menu? Also I have an MP3 in the windows folder but it won't show up in the ringtone settings. Any advice?
i have tried the fake server method and setting to manual- didnt work
tried the disabling replog.exe using memmaid didnt work
tried unchecking change time auto in phone settings - didnt work
i tried deleting poutlook.exe from startup- didnt work
tried the reg edit of activesync mentioned earlier changing from 5 to 0 - didnt work
my god. i even installed quickmenu and hit its setting to turn off activesync
it still starts!!!
what else is possible??
Same here and it's darned annoying!
Anyone have a solution??
one more here
if you use fdcsoft task manager and go into notifications look for the repllog.exe that states "Event: The system time change" (for me its the one in the middle of the three) and disable that.
hieu2ueih said:
if you use fdcsoft task manager and go into notifications look for the repllog.exe that states "Event: The system time change" (for me its the one in the middle of the three) and disable that.
Click to expand...
Click to collapse
But you have to enable it every time you actually need to sync...
You shouldn't have to, the ActiveSync USB connection is controlled by one or both of the other 2. Disabling the one mentioned above has worked for me. It now ONLY appears if I ActiveSync.
Nooner said:
You shouldn't have to, the ActiveSync USB connection is controlled by one or both of the other 2. Disabling the one mentioned above has worked for me. It now ONLY appears if I ActiveSync.
Click to expand...
Click to collapse
how do you "disable"? i deleted it
is that the same
cause if it is then it didnt work for me
lbhocky19 said:
how do you "disable"? i deleted it
is that the same
cause if it is then it didnt work for me
Click to expand...
Click to collapse
i am kind of confused too
same here
stas333 said:
i am kind of confused too
Click to expand...
Click to collapse
Deleted the repplog when time changes, but still keeps popping up...
Hi
Before 3 days I replaced TF3d with this one http://forum.xda-developers.com/showthread.php?t=423851&highlight=diamond+manila
Since now I hadn't randomly activesync and charching over night is ok
has anyone found an easier way to make this happen?
dont forget to try turning off the 'automatic change time zone and clock' found in settings-> personal -> phone ->time zones
this mixed in with disabling repllog (apprunaftertimechange)
and mixed with creating a fake server to set the update time to manual
these 3 things combined together worked for me
sayazs said:
dont forget to try turning off the 'automatic change time zone and clock' found in settings-> personal -> phone ->time zones
this mixed in with disabling repllog (apprunaftertimechange)
and mixed with creating a fake server to set the update time to manual
these 3 things combined together worked for me
Click to expand...
Click to collapse
ive asked this before on other threads but when you say disable that repllog does that mean delete it??
lbhocky19 said:
ive asked this before on other threads but when you say disable that repllog does that mean delete it??
Click to expand...
Click to collapse
This 2007 thread from KidNovak explains it all.
http://forum.xda-developers.com/showthread.php?t=322673
You'll need the program “Task Manager by FdcSoft” --> go to "Notifications", select the correct repllog, and click the Icon with the RED dot at the bottom. No need to erase or delete. The Red Dot disables that repllog, and you can enable it again in the future if you need it.
I want to ask just oine thing.
What does the activesync do that you are so mad about it being active? From my own experience it doesnt seem to drain battery, it doesnt pop up any windows, it doesnt make sounds, or noises. Its quiet. So why trying to remove it with such dedication and force?
Just ignore it. I do. And i dont have a problem.
Disabling ActiveSync KeepAlive Setting to manual >>>
I have an AT&T Tilt which ActiveSync keeps autostarting every five minutes and could not stop it. It was a serious power drain on the battery. I found that it takes 3 fixes to stop the sync action from auto-starting all the time.
1. Kill the repllog / remote h process in the task manager (recommmend fdc taskmanager for this)
2. Disable the Repllog Notification (Apprunaftertimechange) in the Notification Window.
3 Registry hack > HKEY>CURRENTUSER>SOFTWARE>MICROSOFT>ACTIVESYNC
locate value "Keep Alive" change this to "0" for disabled. 1 will keep it alive with the remote h settings.
I have Windows Mobile 6.1 Pro and use AS version 4.5 the latest and this works for me.
The ultimate solution.
Ok here's what you do. The fake exchange server solution never worked for me either.
First of all you need FdcSoft's Task Manager program. It is the best and a must have.
Use the Notifications editor to disable the repllog.exe for RunAfterTimeChange. (The disable button is the one with the red dot.)
Use the registry editor to go to [HKEY_CURRENT_USER\Software\Microsoft\ActiveSync] Change the KeepAlive value to 0. Tap and hold "KeepAlive" (or go to file menu) and select "Export...". (not Export All) Save this .reg file in the \\Windows\StartUp folder or save it somewhere else and copy it there.
Now you will need Ghisler's Total Commander.
Using Total Commander, browse to \\Windows\Startup folder or wherever you saved .reg file. (Windows mobile doesn't automaticaly know that .reg file should be opened with TaskMgr so you have to associate it.)
Tap and hold your .reg file and select Properties. Select "Associate" tab. Tap gray box that says "Associate..."
In "Command:" box browse to the folder where TaskMgr.exe is. (\Program Files\FdcSoft\TaskMgr\TaskMgr.exe)
In "Parameter:" box leave the "%1" there, and type "/silent" right after. ("%1/silent") This will keep a dialog box from poping up on start up.
"Ok" everything and you're done! Enjoy.
I'm also running Windows Mobile 6.1 on an HTC Touch Elfin.
Here's how I was finally able to do it, and my notes:
-disable auto time zone/clock updates in “phone” settings under personal
-disable 1 of 3 “repllog.exe” that has to do with update after time change with “TaskMgr.exe – by FdcSoft” under notifications
-change registry value of HKCU\Software\Microsoft\ActiveSync\KeepAlive to 0 (this will not stick after reset unless you've first disabled the auto timezone/clock updates)
-reset phone
-re-enable auto time zone/clock updates (not sure if it still work though without ActiveSync)
-it will work without disabling the notification in TaskMgr too but then you have to leave auto timezone/clock changes unticked and you still have to do the registry change; ticking of auto timezone/clock changes without TaskMgr change to repllog.exe will also re-enable the keepAlive registry value
This is locker (screen and sometimes buttons) what i have made for myself.
It's alternative for S2U2 and windows screen lock.
Main features:
1. Lock screen and keys on wake up, but only when ambient light level low
2. Lock screen when any phone activity (dialing, talking, incoming call offering). Because proximity sensor works not very good.
3. Quick unlock without slide using double click on hardware Back button
4. Quick power off after resume if not unlocked
5. Adapted for Inesoft Phone (greate app for me because of customizing contact rings and custom names for phone fields of contacts)
Additional features:
1. Reminders for missed calls, unread sms messages
2. Screen off after call connected
3. Vibrate alerting during the call: connected, n-th second of talking
4. Alternative sms alerting (used by me for setup once and did not setup again after reflash
5. SMS patch utility replace of Zenyee disable Htc Messaging (white form appears on the screen for short time nervous me)
6. Auto redial if call dialing failed
7. Changing keyboard when stylus in/out (yep, i know that HD2 does not have stylus)
8. Simulate stylus out event for unlocking S2U2 with double click on hardware button Back
Disadvantages
1. Settings changed only through registry
2. Minimalistic interface
Advantages
1. First stable build of this utility with good CAB install and uninstall (hope for this)
2. Changed for best (for me) locking of the phone
3. Native code only (I like managed code, but it's speed periodically sucks for small apps)
Install
1. Install attached CAB
2. Settings described in readme.txt file in installed directory (default is \Program Files\HtcExtFun)
Hints
1. This tool can not lock Answer and End hardware keys in call (i don't know hot to apply this and don't want to do this)
Will be interest for your feedback!
A pity none has still posted his feedback, so let me be the first.
1- great app: i use version 0.2 since a long time with great satisfaction (and now that Leo roms disables transcriber in SipMenu, HtcExtFun is the only way to recall it)
2- What did work in old version seems to work well in this one as well (i used only stylus in/out and missed calls/sms reminder)
3- On my device the new screen lock doesn't work. Maybe it's because i have a Blackstone and not a Leo? Anyway i run Manila 2.5.1921 (as Leo), and on resume after suspend the "screen locked" square is there. But not only i can normally use my screen (i can swipe across Manila tabs without problems), but trying to slide the slider nothing happens: the square is still there, the cursor doesn't move. It's a pity, because this was a great improvement (it works with the back double tap, but it's the only way [and i don't like it, since when in my pocket i often press keys]).
4- It's useless i post a screenshot since what appears is the same as in yours
5- Can i suggest you to post your app in "Dev&Hacking" forum? I never read this one since i don't have a Leo, and so only for chance did find you released a new improved version.
6- There are some undocumented reg values:
* HandleSmsPatch
* MaximizeVolumeTime
* LSensorOffValue (i suppose it's for light sensor?)
7- You have not documented that "ScreenLockWhenResumePowerOff"=dword:00000000 disables the poweroff timeout
8- A thing i don't like is that app add itself missing registry keys filling them with standard values. So i, on purpose, didn't add the AlertNewSmsScript and AlertNewSmsSound, but at first start the app did add them to registry.
9- For your records, this is my reg config:
Code:
[HKEY_CURRENT_USER\Software\HtcExtFun]
"HandleSmsPatch"=dword:00000000
"ScreenLockWhenResumePowerOff"=dword:00002710
"MaximizeVolumeTime"=dword:0000000A
"LSensorOffValue"=dword:0000000A
"AlertNewSmsSound"=""
"AlertNewSmsScript"=""
"ScreenLockWhenResumeLight"=dword:00000000
"ScreenLockWhenResume"=dword:00000001
"ScreenLockWhenConnecting"=dword:00000000
"SipChangeStartupWait"=dword:00004E20
"VibrateWhenConnected"=dword:00000014
"TiltZFaceUp"=dword:000002F8
"TiltXYZDist"=dword:0000F350
"TalkVibrateSecond"=dword:00000000
"TalkVibrateLength"=dword:00000000
"StylusOutSipName"="Riconoscitore elaborato"
"StylusInSipName"="Touch Input"
"SipChangeWait"=dword:00002710
"ScreenOffWhenConnecting"=dword:00000000
"ScreenOffWhenConnected"=dword:00000000
"RedialTime"=dword:00000000
"RedialStartSound"=""
"RedialDoneSound"=""
"AlertMessagesSound"="snd-alert-sms-voice.wav"
"AlertMessagesScript"="t3600 aW120v100pw200v100W60r aW200v100pw200v100W100r"
"AlertCallsSound"="snd-alert-calls-voice.wav"
"AlertCallsScript"="t300 aW60v100pw200v100r t3600 aW120v100pw200v100W60r aW200v100pw200v100W100r"
"AlertBatteryLevel"=dword:00000000
Sadly i have to edit my previous 2). Sms/missed call reminder doesn't work with this new version: no sound at all. So i switched back to 0.2
Nice!
Maybe you can help us here?
http://forum.xda-developers.com/showthread.php?t=612072
Hi exidler,
I just tried your soft, which was cool but not the soft-locker I want.
So I wanted to unsintall ... damn! It doesn't work.
Whenever I try, I got that error message "can't register touch driver" (a window titled HtcExtFun Unsintall).
I try after deleting the startup link, and a softreset, so that the exe wasn't running ..
How can I proceed ?
Thank you in advance.
I'm in the same case. I've already deleted all the corresponding keys in the reg but nothing else to do. I'm still stuck with that problem. And no way to reinstall it.
Edit : I used SK Tools software to clean all the registry and unused folders, and now it works.