I have my gmail account linked for pull notifications...
the problem is it will not connect to gmail via wifi rather it olny updates through the 3g data network.
I have checked the advanced settings where the connection type is set to internet but this doesnt change things...
Any suggestions?
make sure you have the wifi connected on and connected to the internet.
also, through the connection tab in settings make sure you have told it that internet connects to wifi,
although, it may be better for you to temporarily disable the data connection whilst you use the wifi if the above doesnt work.
Im for sure connected to my wifi network...
I make the other adjustments...
thanks for the reply!
hi
sometimes wm can be picky like that
why not update over the 3g network?
This comes up becasue I work in the basement of a building with little to no access to cell signal so I can enable wifi and connect but it will not sync wia wifi...
Related
Hi guys,
I've recently become the proud owner of a vodafone touch pro. However when connecting to wifi, opera etc will not find any webpages. Now i know my wifi is working and the phone connects fine and picks up the DHCP ip address.
What could I be doing wrong? I've noticed data connections is disabled but I believe this is just for GPRS etc? Either way how can I confirm my wifi connection is being used?
Many thanks
EDIT - NM it was because it was not set to work
Hi Scribe,
I had the same problem as yours. No solution so far. Had no problem with GPRS.
I have mine working good on either wifi or GPRS.
Probably it's wifi problem? Have you tried on another wifi connection?
what was not set to work?
I have the same issue, connects to wifi but no internet. laptop connects and browses fine, but touch pro (and also diamond) don't
Make sure when you set your wifi connection up you say that it is used to connect to work not the internet, also make sure your adapter settings say this.
The problem is that the phone will always default to GPRS/3G for the internet but if it senses a local work network it will use that first.
Stupid I know!
I have the same prob, I changed some settings and it works. Try change Authentication to Shared instead of WAP-PSK, Data Encryption to WEP instead of TKIP. After you have internet connection, you can change to previous wifi settings with same network key.
Mine has gone again! I swear it's because 'Connects to the internet' wont save in the proxy settings - nope not that and still wont work, I've also tried by disabling all security
-Does anyone know how to priotize w-lan for internet connections?
It seem that my phone always uses the mobile connections (GSM, 3G etc).
In menu for connections where internet connections can be created, I can't find anyting about w-lan.
This is something I've been meaning to ask about while I wait for the Fuze. By way of background, I have a Cingular 8525 with the original (WM5) ROM, and it drives me nuts using it at home. I only get EDGE inside my house, but the stupid phone persists in making an EDGE data connection instead of using the nice, fast Wifi connection that I just enabled. I use NoData to make sure it doesn't connect via EDGE or 3G, and then half the time it says it says that it can't connect -- even though the icon says that it is connected!! The only way I can reliably connect via Wifi is to go briefly into and out of flight mode, then turn on Wifi before connecting.
I'm really, really hoping that the situation is better with the Touch Pro/Fuze. Can anyone reassure me on that?
it should be accessing wifi first by default i believe...unless other connection is already connected
Hello!
Start first the WiFi Connection and then the Internet Explorer or Opera.
pjo12345
There's this stupid thing with wlan connections in WM - if connection type is set to 'Work', you can browse through files on other computers in (W)LAN at home, but any Internet connection wll be realised through GRPS/3G. To make it connect to the Internet using WiFi, you need to switch wifi type back to 'Internet'.
Maybe that's the thing?
Is there a way how to setup that the WiFi is connected to both (work AND internet)? I never saw WiFi connected only to work network... I assume there is no way but why not to ask ;-)
I know that many others have problem with that, but I didn't find any solution yet...
Because when I set it as work, my Exchange sync is working but no Internet, and when I switch to Internet, opera and QuickpGPS is working, but no Exchange sync (it is trying to open VPN connection because I need to go though inside address to the server because certificates and of course it cannot get it). Or I need somehow set that no VPN will be dealed on this WiFi network...
I need something like BOTH or Auto option.
It seems to be switching from Wlan to G / 3G / H when the signal is not that great. Mostly with the weather tab and Opera. Quick GPS works fine. The way I make sure it is on the internet through wlan is to shutdown the telephone and keep the wlan on with comm manager. The disadvantage is that anyone calling will be heading to your voicemail. Another option is to use the "Nodata" program, en disable to internet connections.
On Touch Pro, I usually just go to COMM MANAGER and switch on wifi and switch off data connection. It is only a couple of quick steps and saves battery, since you don't need both on, if you only want to use wifi.
I am sure there must be a more seamless solution, but I like easy fixes.
wmm said:
I'm really, really hoping that the situation is better with the Touch Pro/Fuze. Can anyone reassure me on that?
Click to expand...
Click to collapse
No it is not better. Turning on WiFi is not enough. It will continue to use the cellular data connection until you manually turn it off. This wouldn't be so bad, but in my experience I've had to push the button to turn off the cellular connection multiple times before it would actually do so. What would be really nice is if WM could seamlessly switch from the cellular network to WiFi, with zero user interaction, just like the iPhone does.
I got an other problem with wifi. When I establish a wifi-connection and pull my mail the ppc still connect with a data-canection and didn't use the wifi. My kaiser used the wifi-connection for that.
8notime said:
No it is not better. Turning on WiFi is not enough. It will continue to use the cellular data connection until you manually turn it off. This wouldn't be so bad, but in my experience I've had to push the button to turn off the cellular connection multiple times before it would actually do so. What would be really nice is if WM could seamlessly switch from the cellular network to WiFi, with zero user interaction, just like the iPhone does.
Click to expand...
Click to collapse
I wrote the original post before I had a chance to try it for myself. I've had a Fuze for three weeks now, and it works fine for me. I turn on wifi and the Fuze uses wifi. I turn it off and it goes back to normal wireless. (I did do the registry edits to turn on the HSDPA stuff in the connections tab and enabled the modified connection icons in the menu bar. I don't know if that had any effect on this issue or not, but it does what I would expect now.)
hey, I have a problem with my HTC TP.
it always prefers the HSDPA link when connecting with a web based application souch as opera or MSN.
Even if I have it connected to a Wi-Fi it still boots up the HSDPA and goes online using that link.
I'm new to WM, so this is a bit vague, but I had the same problem, but I fixed it at some point last week...
There is a setting, somwhere (I told you it was a bit vague!), that tells programs to use WiFi as the default connection. I can't for the life of me remember where, and I've flashed roms since, but I'm sure it was a windows setting in "settings > Connections".
Sorry I couldn't be any more help, but at least you know there is a fix, somwhere...!
Hehe, thanks, I've tried looking for this feature for hours, becouse I can't for the love of whoever understand why there wouldn't be an option for it
there isn't one because it shouldn't need it. As long as your Wi-Fi is set to Internet, and Not work, it should always use that as long as it is connected.
Just having Wi-Fi turned on doesn't cut it.
There are certain applications that will always use the cellular network, like pushmail, but in general, all apps will use whichever internet connection is available. and if Wi-Fi isn;t connected, it will automatically connect to GPRS/3G.
Wellt hats the problem, I connected it t my home Wi-Fi set it as internet connection and the problem remains. I have redone the settings several times and it still prefers the HSDPA connection.
if I turn of all other alternatives to connect to the web, like removing APN settings for GPRS and HSDPA it uses the Wi-Fi, but as long as there is another Access link to the net the Wi-Fi isn't used
I have the same problem with Hotmail syncing (not defaulting to Wi-Fi), but not with Opera. I do have to change the connection settings though first from the T-Mobile Internet (and their magic transparent proxy) before Opera can work over Wi-Fi, but I thought the connection settings were just for HSDPA/GPRS connections. I'm finding this increasingly frustrating that I need to reconfigure everything depending where I am.
BTW, to get Hotmail to use Wi-Fi I have to go to the Comm Manager and turn off "Phone", turning off "Data Connection" doesn't work, because it craftily turns it back on, seconds later!
Hello all,
I have just got a Sony X1. It connects to my home wireless fine. My question is once its connected will it automatically do all browsing/downloading/email through the wireless or do I have to tell it?
Im just worried because my daily 3G usage is very high (nearly 10mb yesterday) even though I try and only download large files when connected to my wireless. I want to make sure its not downloading through 3G when the wireless is switched on..
Thanks!
default is using the most accessible connection...
if wifi is connected it won't try to access the internet thru 3G..
you're safe as long as you make sure your wifi is connected and you have an active internet connection
In my case I've seen many times that the phone still uses the 3G connection even if WiFi is available and connected (maybe for power saving reasons?). So I always disconnect the 3G connection when WiFi is active. Currently I use Mortscript to do this for automatically.
If this problem occurs, you can also use a small useful app called NoData
(can be found in the forum)
Here's a basic question about the HTC Fuze. If I'm using the Edge network and I turn on wifi, thereby getting a faster connection, do Fuze applications default to the faster connection or do I somehow have to turn off the edge/3G connection specifically. I know I should be able to tell...
I usually have both wifi and edge/3g off. When I need data I turn on whatever i need. You do that thru the communication manager.
I think the real question is with both the Edge/3G on and Wifi connected, where will the data transfer? Through the cell network or the WiFi network?
the icons on the top bar of my device display clear which connection is active
with a data session
when one is active it's the only one being used to access data from the internet
It's possible to have both OTA and wifi active, which is what the OP is driving at. IME a program will find and use the faster connection at startup, but if the program is running on OTA and you connect wifi, a lot of programs won't switch to the faster connection. Again, that's just my anecdotal experience - it's hard to tell which connection is being used in real time.