Hello all,
I have just got a Sony X1. It connects to my home wireless fine. My question is once its connected will it automatically do all browsing/downloading/email through the wireless or do I have to tell it?
Im just worried because my daily 3G usage is very high (nearly 10mb yesterday) even though I try and only download large files when connected to my wireless. I want to make sure its not downloading through 3G when the wireless is switched on..
Thanks!
default is using the most accessible connection...
if wifi is connected it won't try to access the internet thru 3G..
you're safe as long as you make sure your wifi is connected and you have an active internet connection
In my case I've seen many times that the phone still uses the 3G connection even if WiFi is available and connected (maybe for power saving reasons?). So I always disconnect the 3G connection when WiFi is active. Currently I use Mortscript to do this for automatically.
If this problem occurs, you can also use a small useful app called NoData
(can be found in the forum)
Related
I´m new to this xda-world and got my first HTC Touch Cruise.
Is it possible to set preferred connection when going online? Is there a setting that tells the phone to use Wi-Fi when possible, and just use GPRS when no other connection is availible.
That works as standard. If it detects a wifi connection it will always use that first, and only use GPRS/3G/HSDPA if the wifi connection is off.
really?
Hi,
My TC seems to use 3G connection (as seen through Spb GPRS Monitor) although I am connected via WIFI. How can I avoid that so as to use 3G only for phone, or when I am out of wifi for data?
Cheers,
Thomas
-Does anyone know how to priotize w-lan for internet connections?
It seem that my phone always uses the mobile connections (GSM, 3G etc).
In menu for connections where internet connections can be created, I can't find anyting about w-lan.
This is something I've been meaning to ask about while I wait for the Fuze. By way of background, I have a Cingular 8525 with the original (WM5) ROM, and it drives me nuts using it at home. I only get EDGE inside my house, but the stupid phone persists in making an EDGE data connection instead of using the nice, fast Wifi connection that I just enabled. I use NoData to make sure it doesn't connect via EDGE or 3G, and then half the time it says it says that it can't connect -- even though the icon says that it is connected!! The only way I can reliably connect via Wifi is to go briefly into and out of flight mode, then turn on Wifi before connecting.
I'm really, really hoping that the situation is better with the Touch Pro/Fuze. Can anyone reassure me on that?
it should be accessing wifi first by default i believe...unless other connection is already connected
Hello!
Start first the WiFi Connection and then the Internet Explorer or Opera.
pjo12345
There's this stupid thing with wlan connections in WM - if connection type is set to 'Work', you can browse through files on other computers in (W)LAN at home, but any Internet connection wll be realised through GRPS/3G. To make it connect to the Internet using WiFi, you need to switch wifi type back to 'Internet'.
Maybe that's the thing?
Is there a way how to setup that the WiFi is connected to both (work AND internet)? I never saw WiFi connected only to work network... I assume there is no way but why not to ask ;-)
I know that many others have problem with that, but I didn't find any solution yet...
Because when I set it as work, my Exchange sync is working but no Internet, and when I switch to Internet, opera and QuickpGPS is working, but no Exchange sync (it is trying to open VPN connection because I need to go though inside address to the server because certificates and of course it cannot get it). Or I need somehow set that no VPN will be dealed on this WiFi network...
I need something like BOTH or Auto option.
It seems to be switching from Wlan to G / 3G / H when the signal is not that great. Mostly with the weather tab and Opera. Quick GPS works fine. The way I make sure it is on the internet through wlan is to shutdown the telephone and keep the wlan on with comm manager. The disadvantage is that anyone calling will be heading to your voicemail. Another option is to use the "Nodata" program, en disable to internet connections.
On Touch Pro, I usually just go to COMM MANAGER and switch on wifi and switch off data connection. It is only a couple of quick steps and saves battery, since you don't need both on, if you only want to use wifi.
I am sure there must be a more seamless solution, but I like easy fixes.
wmm said:
I'm really, really hoping that the situation is better with the Touch Pro/Fuze. Can anyone reassure me on that?
Click to expand...
Click to collapse
No it is not better. Turning on WiFi is not enough. It will continue to use the cellular data connection until you manually turn it off. This wouldn't be so bad, but in my experience I've had to push the button to turn off the cellular connection multiple times before it would actually do so. What would be really nice is if WM could seamlessly switch from the cellular network to WiFi, with zero user interaction, just like the iPhone does.
I got an other problem with wifi. When I establish a wifi-connection and pull my mail the ppc still connect with a data-canection and didn't use the wifi. My kaiser used the wifi-connection for that.
8notime said:
No it is not better. Turning on WiFi is not enough. It will continue to use the cellular data connection until you manually turn it off. This wouldn't be so bad, but in my experience I've had to push the button to turn off the cellular connection multiple times before it would actually do so. What would be really nice is if WM could seamlessly switch from the cellular network to WiFi, with zero user interaction, just like the iPhone does.
Click to expand...
Click to collapse
I wrote the original post before I had a chance to try it for myself. I've had a Fuze for three weeks now, and it works fine for me. I turn on wifi and the Fuze uses wifi. I turn it off and it goes back to normal wireless. (I did do the registry edits to turn on the HSDPA stuff in the connections tab and enabled the modified connection icons in the menu bar. I don't know if that had any effect on this issue or not, but it does what I would expect now.)
Even though WiFi is up and running, my phone keeps getting connected via GPRS automatically. Although most programs use the WiFi connection, sometimes they switch over to GPRS. Also, when I reboot the phone, WiFi gets deactivated and GPRS kicks in automatically. Of course, this is a bad thing since my carrier allows only 1MB of downstream on GPRS.
The other problem is that WiFi keeps getting disconnected after a period of inactivity. Now I don't mind this happening as it saves battery, but I don't want this to happen when I'm at a place having access to a power source. Strictly speaking, I could live with the WiFi getting disconnected, but the irritating thing is that sometimes it just doesn't reconnect - instead, a baloon pops up informing me of all other wireless networks available - my network isn't listed! Then after a few more minutes, it automagically connects to my network. Sometimes, to get the wifi to connect, all I have to do is click on the "G" icon (I'm about to open the wireless manager) and the WiFi starts to connect! Just w.t.h is going on here? :S
Now the common "solution" for the GPRS problem that's floating around the net is to use a program that disables the GPRS connection, like Modaco NoData or such, but I'm looking for a more permanent solution (regtweak?) by which:
1) GPRS is never connected and if connected, never used by any program IF there's an active WiFi connection
2) When the phone (re)boots, WiFi should be activated and if any "known" networks are found, should connect to it automatically, else it should be deactivated
3) Perhaps WiFi/GPRS can be enabled/disabled based on the cellid/GPS and/or time schedules? Now I know of programs that can do this, but I'm looking for something extremly light, preferably which doesn't have a GUI and/or runs as a service and can be configured by xml/ini/reg (or maybe have a seperate GUI for settings)
Any ideas people?
Thanks for your time.
Did you ever find a solution for this? I'm in the same boat and would like to know as well. Thx.
Yeah, I changed phones. Didn't face this issue on a Diamond and a Hermes.
got the same problem with my tg01 keeps dropping wifi and keeps connecting to gprs when wifi is on
Here's a basic question about the HTC Fuze. If I'm using the Edge network and I turn on wifi, thereby getting a faster connection, do Fuze applications default to the faster connection or do I somehow have to turn off the edge/3G connection specifically. I know I should be able to tell...
I usually have both wifi and edge/3g off. When I need data I turn on whatever i need. You do that thru the communication manager.
I think the real question is with both the Edge/3G on and Wifi connected, where will the data transfer? Through the cell network or the WiFi network?
the icons on the top bar of my device display clear which connection is active
with a data session
when one is active it's the only one being used to access data from the internet
It's possible to have both OTA and wifi active, which is what the OP is driving at. IME a program will find and use the faster connection at startup, but if the program is running on OTA and you connect wifi, a lot of programs won't switch to the faster connection. Again, that's just my anecdotal experience - it's hard to tell which connection is being used in real time.
Is there such app?
or perhaps something that prevents the phone from disconecting from a wifi conection when it goes to sleep?/
or one that prevents the phone to go sleep while conected to a wifi?
The thing is, my plan is not unlimited and i dont want to use 3G if a wifi connection is available and connecting each time is a pain.
At some point Froyo was doing this (conecting automatically, almost instantl to my home wifi when i opened browser for instance) but not anymore.
cheers