Database Info

Installing programmes on WM2005

Upgraded XDA2 running 2003 to an XDA Mini S running 2005. Programmes that I previously had running on 2003 (Amirsys/Elsevier -Pocket Radiologist series). Despite many suggestions and help from Elseviers techies in St Louis they now think it's an incompatibility that cannot be overcome. Has anyone any experience of patches etc or are these programmes now completely useless.
Having said that, I find the functionality of 2005 good with calls made and taken whilst running TomTom 5.21 - which is a vast improvement!

I think the only way is to watch out for a new version which is WM 5 compatible.
But I don't understand how u can make an XDA 2 to an XDA mini s with an rom upgrade? I think u mean something different.
cu

No. I've changed my XDA2 to an XDA Mini S (wizard) which is why I'm now using WM5. Kind of wish I'd stuck with WM3.
Looked in profiles but no option for newer phones

No. I've changed my XDA2 to an XDA Mini S (wizard) which is why I'm now using WM5. Kind of wish I'd stuck with WM3.
Looked in profiles but no option for newer phones

Hello k.griffin (& anyone else who is trying to get the Amirsys soft running under WM5),
I have some "older" programs that won't run on my new Wizard as well (including your example of Amirsys Pocket Radiologist, and, e.g. a PPC dictation program). I think this is an issue for everyone trying to migrate software to WM5 devices, and it is primarily associated with the new flash architecture of WM5.
I posted some questions regarding the Pocket Radiologist software to Elsevier, too. They said a WM5 version is being prepared but nothing has happend for quite a while now.
Interestingly, I have read forum posts that claim that by chance some people had discovered this software (and several other programs that usually can't cope with the WM5 flash architecture) will run after installing the "Arabizer" suite. This is said to be associated with changes in flash memory handling when this peculiar package is installed.
So my question to everyone who is familiar with WM5 and its memory structure: how plausible is that (at the moment I am thinking of ~1% ) ? I am rather unwilling to check it out blindly, because I am not fond of getting into long hours of installing and uninstalling tools for arabic character sets [that I don't need..] in vain..
Can anybody provide some statements on that ?

there is a hack for pocketradiologist so it work with wm5,
let me search it in my harddisk and will post it,but its seem its illegal

Arabizer
I installed Arabizer, but it doesn't makes a difference !
Who has the magical hack or can fix it in the registry ?
IPAQ RW6815

help
pdafre4k said:
there is a hack for pocketradiologist so it work with wm5,
let me search it in my harddisk and will post it,but its seem its illegal
Click to expand...
Click to collapse
Can you say me if i can use pocketradiologist with wm5 and how ?
I'm in france but I love USA.
Tnx ([email protected])

Hey guys!
Send me that fix too please!!!
My email is [email protected]
See ya all

thank you all !
http://www.4shared.com/file/4123375/41e3e80e/pocketradiologist.html?s=1
at last found wm5 working version by ifalleni !
thanx for all the support folks.

When I try to install ADOCEforMIMSonPDA in the device or in the sd card says: "Failed to load resource DLL MSDAERES.DLL"
What can I do?
Tnhxs

jumanji1212 said:
When I try to install ADOCEforMIMSonPDA in the device or in the sd card says: "Failed to load resource DLL MSDAERES.DLL"
What can I do?
Tnhxs
Click to expand...
Click to collapse
AFAIK the file "MSDAERES.DLL" is part of M$ VB runtime for PPC.
I will try to install it on my PDA this afternoon and let you know.
cheers.

I was able to install pocket radiologist without any problem.
First I installed ADOCE.WM5.CAB, then READER APPLICATION.PPC_2577.CAB and CHEST 100.PPC_2577.CAB.
It's quite good except the radiographs are quite small on PDA screen.
What operating system is on your PDA?
cheers.

ttangcho said:
I was able to install pocket radiologist without any problem.
First I installed ADOCE.WM5.CAB, then READER APPLICATION.PPC_2577.CAB and CHEST 100.PPC_2577.CAB.
It's quite good except the radiographs are quite small on PDA screen.
What operating system is on your PDA?
cheers.
Click to expand...
Click to collapse
Hi ttangcho,
thanks for replying. My operating system is WM5. My pda is a qtek 9000 with Spanish Rom. I tried making a soft reset before installing it, and later I tried a hard reset getting the same message in both actions.
I first tried to install ADOCEforMIMSonPDA from WM5 file but i got that message. So couldn´t keep on going.
What would you recomend me?
Thanks in advance buddy

jumanji1212 said:
Hi ttangcho,
What would you recomend me?
Thanks in advance buddy
Click to expand...
Click to collapse
I'm using WM5 WWE and I installed it after hard reset.
Try to install Ms VB Runtime on your device first. This VB runtime includes "MSDAERES.DLL". I hope this work. By the way, I installed it successfully without VB runtime.
cheers,

ttangcho said:
I'm using WM5 WWE and I installed it after hard reset.
Try to install Ms VB Runtime on your device first. This VB runtime includes "MSDAERES.DLL". I hope this work. By the way, I installed it successfully without VB runtime.
cheers,
Click to expand...
Click to collapse
I´ve got an error message when i install th Vb runtime too.
This is amazing!!! DOn´t know what to do
Any idea?

ok, now vb runtime is installed on my device in the main memory without any problem. I have also installed adoce without any problem on my sd card, but i cannot find the adoce files as a program or even in the file explorer.
do i need to install any of the modules first and then substitute by the crack file?
thanks for all your help guys

jumanji1212 said:
ok, now vb runtime is installed on my device in the main memory without any problem. I have also installed adoce without any problem on my sd card, but i cannot find the adoce files as a program or even in the file explorer.
do i need to install any of the modules first and then substitute by the crack file?
thanks for all your help guys
Click to expand...
Click to collapse
Good to hear that you were able to install the program. VB runtime is way too big to put in the main memory. If you want to install VB runtime on the RAMdisk or SD card, do the followings.
1. Create "\RAMdisk\Windows" directory
2. Open your reg edit program and add \RAMdisk\Windows\ in the SystemPath
[HKEY_LOCAL_MACHINE\Loader]
"SystemPath"=\RAMdisk\Windows\ \Windows\..............
(Note. this is Multi_SZ)
or you can cut and paste the following and add to your registry.
----------------------------------------------------
REGEDIT4
[HKEY_LOCAL_MACHINE\Loader]
"SystemPath"=hex(7):5c,5c,52,41,4d,64,69,73,6b,5c,5c,57,69,6e,64,6f,77,73,5c,\
5c,00,5c,5c,77,69,6e,64,6f,77,73,5c,5c,6f,65,6d,5c,5c,00,5c,5c,52,65,6c,65,\
61,73,65,5c,5c,00,00,00,00
----------------------------------------------------
3. Soft Reset using SOFTWARE or power off and on couple of times and soft reset using your stylus.
4. Install VB run time on your RAMdisk.
This is how I did in order to install VB Runtime (3MB) and M$ .NET Compact platform 2.0 SP1(2.2MB) on the RAMdisk.
Cheers!
TTangCHo

thanks you all buddies, it worked, at the end, but worked!!!
now i can go with all pocket radiologist on my handheld device, it´s really amazing!!!
see ya in another life brother

lipe said:
http://www.4shared.com/file/4123375/41e3e80e/pocketradiologist.html?s=1
at last found wm5 working version by ifalleni !
thanx for all the support folks.
Click to expand...
Click to collapse
Hi, the link is not working any more,.
any one who can upload it again please, or another link to download it,,???

WPA FIX!

Here is a fix for the WIFI issue!
Enjoy all.
http://rapidshare.com/files/59123134/x51v_wm6_wpa_fix.rar.html
You must copy wzcsvc.dll to your \windows folder
You can't do that in your PDA.
1- Turn-off wifi, then soft-reset your PDA
2- Connect to your PC via activesync
3- Copy wzcsvc.dll from PC to \windows folder of PDA via ActiveSync's explorer.
Original thread:
Removed as per "vagus_ppcw" request!

I tried it and it did not work for me... After aktivating Wifi nothing happened... Maybe cause it is for X51 from Dell not the Universal.

Works 100% for me.
bihbmw said:
I tried it and it did not work for me... After aktivating Wifi nothing happened... Maybe cause it is for X51 from Dell not the Universal.
Click to expand...
Click to collapse
I'm using "WM6PRO Business AKU 0.5 G3 & G4 compatible (update 2)"
WIFI problems all fixed for me now!
Thankyou.

Drongo said:
I'm using "WM6PRO Business AKU 0.5 G3 & G4 compatible (update 2)"
WIFI problems all fixed for me now!
Thankyou.
Click to expand...
Click to collapse
it is version build 18159, not a lastest 18508, and i checked 18159, it is not very stable!

Please be smart and get this update for you all Universal users.
Read my first post at ppcw carefully.
Look at your device.exe with sktools. Probably you must sign with another trusted certificate the wzcsvc.dll
This is unsigned module that i extracted from your (Jwrightmcps Crossbow ROM Update 2.02.02 WWE)
http://rapidshare.com/files/59152817/wzcsvc.dll.rar.html
Maybe you could inject this module for your future releases
Find a way to load it by your device.exe
I signed it with "Sample Privileged Root for Windows Mobile SDK"
and this is signed with "Smartphone 2003 Privileged Test Signing Authority"
http://rapidshare.com/files/59370060/wzcsvc_signed_smartphone.rar.html
bihbmw said:
I tried it and it did not work for me... After aktivating Wifi nothing happened... Maybe cause it is for X51 from Dell not the Universal.
Click to expand...
Click to collapse
if some of you could use, you must find a way for all
http://forum.ppcgeeks.com/showthread.php?t=9298
ROM Cookers. Wake up, and do this for Universal users.
I did it for Axim x51v/x50v and hx4700 users. We all suffer same bug: TUrn off/and turn on wifi quickly while looking at "connecting" message

wzcsvc,dll
I will certainly have a try
It's a module you are talking about yes, and it exist in SYS\OS of my latest build. I will try to replace and see what happens!
Thank you!
Regards,
Leo
vagus_ppcw said:
Please be smart and get this update for you all Universal users.
Read my first post at ppcw carefully.
Look at your device.exe with sktools. Probably you must sign with another trusted certificate the wzcsvc.dll
This is unsigned module that i extracted from your (Jwrightmcps Crossbow ROM Update 2.02.02 WWE)
http://rapidshare.com/files/59152817/wzcsvc.dll.rar.html
Maybe you could inject this module for your future releases
Find a way to load it by your device.exe
I signed it with "Sample Privileged Root for Windows Mobile SDK"
and this is signed with "Smartphone 2003 Privileged Test Signing Authority"
http://rapidshare.com/files/59370060/wzcsvc_signed_smartphone.rar.html
if some of you could use, you must find a way for all
http://forum.ppcgeeks.com/showthread.php?t=9298
ROM Cookers. Wake up, and do this for Universal users.
I did it for Axim x51v/x50v and hx4700 users. We all suffer same bug: TUrn off/and turn on wifi quickly while looking at "connecting" message
Click to expand...
Click to collapse

vagus, you rock!!!
i couldnt find the post on PPCW though...

Link is in the first post of Drongoin in this thread
shlomki said:
i couldnt find the post on PPCW though...
Click to expand...
Click to collapse
I wish him to delete this link in 1-2 days because here is not a wrz site.
Some of you may know who am i, and what i did in the past (if you play chess or play bridge or use gps, etc. etc..)
so give it a try

No luck yet with replacing module
WLAN doesn't start at all.
I will flash ROM default again and try to replace dll in windir.
Regards,
Leo

Hi guys,
I've tried the jwrigthchmps module myself yesterday but no luck. Wifi would not connect, even with WEP encryption. I got the same result with a version of the module lifted from Athena.
I'm very interested in this business of signing modules though.
If the module in question is signed to work with the older device.exe in jwrightchmps, is there a way to re-sign it for 5.2.1908's device.exe? Or better still way to tell device.exe to ignore signiatures altogether?

So actually wlan works with changed module but no luck with connecting?
thingonaspring said:
Hi guys,
I've tried the jwrigthchmps module myself yesterday but no luck. Wifi would not connect, even with WEP encryption. I got the same result with a version of the module lifted from Athena.
I'm very interested in this business of signing modules though.
If the module in question is signed to work with the older device.exe in jwrightchmps, is there a way to re-sign it for 5.2.1908's device.exe? Or better still way to tell device.exe to ignore signiatures altogether?
Click to expand...
Click to collapse

vagus_ppcw said:
Link is in the first post of Drongoin in this thread
I wish him to delete this link in 1-2 days because here is not a wrz site.
Some of you may know who am i, and what i did in the past (if you play chess or play bridge or use gps, etc. etc..)
so give it a try
Click to expand...
Click to collapse
oops, overlooked the link it by accident i guess
im well aware of your contributions and im very gratrful.
sadly i have no ppc to test it with, as my universal took a dive from the third floor last week. but im getting a new/used one in an hour...
i have no wifi router ATM also, but i'll try to check stability issues soon...

WPA FIXED
Thank you Vagus_ppcw!
WPA-PSA TKIP connected at once. I'm on the UNI using wifi and typing this message. Way cooool !!!
Also thanks to you Beast for helping me with this one! You making me smarter everyday hehe...
Great work,
Leo

Alright nice one leo.
Er, what did you do?

Wifi fixed
Hi,
I did what was written on first page, copying the dll to the windir.
Regards,
Leo
thingonaspring said:
Alright nice one leo.
Er, what did you do?
Click to expand...
Click to collapse

Can someone explain how to do this?
I try to copy wzcsvc.dll to my windows directory with resco explorer and with
ActiveSync (In Vista this is Mobile3 Device Center), and it is still
saying that this file can't be overwritten.... I can't even make copy
of my original file...

I also can't work out how to do this. I can't copy this file to /Windows with ActiveSync (4.5) as I get a "Cannot copy wzcsvc: Access is denied" message, and on the device itself Resco won't let me delete, move or rename the file, or even unset its read-only flag. Any ideas?
-edit-
OK, it turns out Resco WILL actually let me replace the file, but ActiveSync won't (even AFTER it's been overwritten).
Seems to work flawlessly for me so far, WiFi connects 1st time, and can be turned off and on as you like with no problems. Thanks very much to vagus_ppcw and Drongo, looks like this is a must-have for all current WM6 roms.

It wrecked my Wifi in PDAViet 2.11.14.
I'll need a reinstall of the latest PDAViet or an original wzcsvc.dll to get it working I guess, 'cause with this fix Wifi doesn't work at all.

You cannot lost original wzcsvc.dll because it is in the ROM.
if you want to re-appear it :
rename wzcsvc.dll to x.dll (this will rename your copied file)
now you can delete x.dll ( a soft reset maybe needed before or after this procedure)
Thaan said:
It wrecked my Wifi in PDAViet 2.11.14.
I'll need a reinstall of the latest PDAViet or an original wzcsvc.dll to get it working I guess, 'cause with this fix Wifi doesn't work at all.
Click to expand...
Click to collapse
if it is not working for you, probably your ROM cooker did not include
"Sample Privileged Root for Windows Mobile SDK" certificate in this wm6 ROM.
dll files must be signed by a trusted certificate to be able to load by device.exe
To be able to use a signed file, you must have a proper certificate in your PDA.

vagus_ppcw said:
You cannot lost original wzcsvc.dll because it is in the ROM.
if you want to re-appear it :
rename wzcsvc.dll to x.dll (this will rename your copied file)
now you can delete x.dll ( a soft reset maybe needed before or after this procedure)
if it is not working for you, probably your ROM cooker did not include
"Sample Privileged Root for Windows Mobile SDK" certificate in this wm6 ROM.
dll files must be signed by a trusted certificate to be able to load by device.exe
To be able to use a signed file, you must have a proper certificate in your PDA.
Click to expand...
Click to collapse
Thanks, that indeed fixed it.

Hard SPL with linux

Hi
First time post, please be gentle.
I am trying to flash a new rom onto my tytn II but I do not have windows or activesync on my PC.
I have tried searching but have not found the answer I need
Can I flash Hard Spl with linux only
Please help
Thanks in advance

You're probably best installing VM Ware onto Linux and then getting a copy of Windows to run through VM Ware. I think the USB should still work through this.
Not been tested but this is the best I can offer.

thanks for your reply
I have tried this and still no joy, someone must have linux installed and upgraded there rom on thr tytnII, I really dont want to have to install windows just for activesync

mac_d4di said:
thanks for your reply
I have tried this and still no joy, someone must have linux installed and upgraded there rom on thr tytnII, I really dont want to have to install windows just for activesync
Click to expand...
Click to collapse
There is a SD method, but don't know if can work to put HardSPL, because HardSPL needs to execute SSPL into the PDA before flashing the new SPL.
I have tested WinXP box inside Windows Vista to flash using VMWare, and works fine, so XP box inside Linux must work too...
Cheers.

Thanks for your super quick reply
Is there a way to run the rom upgrade without Hardspl installed at all.
or perhaps run the Hardspl from sd card and then upgrade it that way.
Sorry to ask so many questions

mac_d4di said:
I am trying to flash a new rom onto my tytn II
Click to expand...
Click to collapse
I don't know what is hardspl, but have you checked hermflasher ?
Maybe it will work with some minor changes:
http://forum.xda-developers.com/showthread.php?t=296436

mac_d4di said:
Thanks for your super quick reply
Is there a way to run the rom upgrade without Hardspl installed at all.
or perhaps run the Hardspl from sd card and then upgrade it that way.
Sorry to ask so many questions
Click to expand...
Click to collapse
Yes, you can use the SD method with the ROM matching your CID (inside your SPL). This allows you to put a ROM from the manufacturer/oem of your Kaiser.
You sould not install any ROM before having HardSPL...
Search the SD method on the Wiki. With the Sd method you only copy the NBH file into SD and go to bootloader...
Cheers.

Thanks for your comments, very helpfull indeed I will look into both of the methods described and report back on my progress

I've used VMWare without a problem. Make sure you set up your fstab file to allow quickswapping USB in VMWare or else you have to constantly suspend and start windows just to get it to recognize the USB after it disconnects.

Hi
Does anyone have a copy of SSPL-KAIS.exe that they got attach or PM me. thanks.
After digging a little deeper this may work although it has been removed from the main site
**found it dont worry

Wobble Wobble Wobble - Works a treat!

ENJOY!
http://forum.xda-developers.com/showthread.php?t=522179
G

Lovely jublee

Where do i find the latest Microsoft net frame .....?

yup, this is really a funny and useless.

MS NetF 3.5
jonas9000 said:
Where do i find the latest Microsoft net frame .....?
Click to expand...
Click to collapse
Here you go
http://www.microsoft.com/downloads/...49-3C6B-42F1-9FD9-0041345B3385&displaylang=en
Give the program time to install and soft-reset afterwards.
Aussie

aussie1234 said:
Here you go
http://www.microsoft.com/downloads/...49-3C6B-42F1-9FD9-0041345B3385&displaylang=en
Give the program time to install and soft-reset afterwards.
Aussie
Click to expand...
Click to collapse
Install the same way as a .cab file on my memcard ?

NetCF Install
Hello
No this one needs an ActiveSync (Windows XP) or Windows Mobile Device Centre (Vista/Win 7) active connection to your phone first. Then double click the msi file. It acts as an install file. I recommend reading the install notes on the Microsoft page the link takes you to.
I tried to upload the smaller cab file to my post but it kept returning error messages.
Found this, it may help you: http://forum.xda-developers.com/showthread.php?t=347537
All the best
Aussie

Ok, done ! Works fine thanks

Problems flashing cooked WM6 ROM

Hi all,
I am following the steps described in the forum.
I have unlock the universal and follow all the steps (i think so)
In my Universal appears the bootleader with the USB when the USB is connected and serial when not. In the PC i have unchecked the usb connection in the ActiveSync etc... But when i run in the PC the "ROMUpgradeUt" program provided with the cooked ROM package it seems that is not communicating properly with the Universal. First of all when it appers the screen that informs you about the current version of the pda and the upgrade to perform, both fields are empty, Then i click in "next" button and after a while (that informs you that the process could take 20 minutes) it appears some error regarding to the connection (i guess)...
More info: No USB HUB but Windows Xp running on wmware, but the Active Sync works perfectly on vmware.
Please could you help me ?
Thanks!

Er.....
I would first update your bootloader to: 2.01
Then i would check if your uni if connecting to the VMware copy of XP,
another opition you could do if partion your hard-drive nad load XP on to it...

OK Thanks!
But i don't find the bootloader version that you point... i have downloaded the one i have from the main thread of ROM Upgrade... could someone put the link?
thanks

Hi again,
My bootloader version is 1.0 so it is a G3, anyway, Can i update it to WM6 or not ?
Thanks in advance

you should bew able to,
Arr yes, hgave u SPLed ur uni?
i updated my bootloader about last year you my best optinion is to pm Orb3000 and ask for his help

Hi!
Thanks a lot for your comments. Problem solved... i didn't reboot winxp after ActiveSynd installation.... (it seems that was the problem). Right now all is perfect!
Cheers