Related
Hi,
I have a German MDA Vario 3 (German - T-Mobile OS and German QWERTZ ÄÖÜ) and I need to flash it with an US/UK OS.
I assume after unlocking the CID I can flash the device with either the Generic HTC Rom or the AT&T Tilt Rom.
So far so good, but what happens to the German Keyboard Layout, this isn't the same as The Tilt or Genereic HTC Layout.
Any Ideas?
Thanks
Mike
hello L2C
pls have a try this method:
in the path [HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD]
change the "Curlang" data to 1031(Dec) or 407(Hex)
soft-reset~
if it doesnt work,pls tell me
i make a cab in case you havent a tool to edit registry
transfer the cab to kaiser and run it
softreset
Thanks for the swift help.
I am just hesitant to flash my device right now, I am unsure to use Soft SPL or Hard SPL.
Cheers
Mike
oh mike,you are welcome
i suggest u to flash the rom with hspl v1,in my opinion that's much safer than sspl.so far i've seen some flash rom unsuccessfully with sspl
u can follow pof's thread to get the hspl
if u flash AT&T Tilt Rom i think ur output would be not the same with ur german keyboard,because the LCID isnt the german one
then u could use the cab to fix it !
hope it can help u, i install the cab and my TyTNII's layout switches to QWERTZ
cheers~
Hi woohyuksheng,
thanks for your help, appreciate it!
One question, the cab you included in your post switches your QWERTY to QWERTZ, right?
But does it also switch QWERTZ to QWERTY (so back an fourth every time you install it?)
Cherrs
Mike
if yours is QWERTY originally,you patch the cab on your kaiser and after soft-reset that your keyboard output will become QWERTZ.
and of course u can remove the cab and give it a soft-reset,yours will be back to QWERTY.
in one word, this cab can only make your keyboard layout become QWERTZ,uninstall it,will become the original one.
regards~
Sheng
My keyboard is originally QWERTZ and I need a patch to make it QWERTY.
Sure that the one you posted will help me?
Cheers
Mike
oh in this case you want it QWERTY,that should be no problem~
try this cab
regards
Sheng
Hi Sheng,
thanks alot, I will try this later today.
I will post feedback
Mike
OK ,wait for your good message~
and one more choice u can take~
if u want it QWERTY like the Tilt, patch with this cab
the Tilt's QWERTY differs with the ordinary QWERTY
the symbol "@" and the "!" r upside down,maybe u can find it comparing the Tilt's pics with others~
regards
Sheng
Hi Sheng
I got one more question for you, maybe to make myself a bit clearer.
I got the German T-Mobile Vario 3 (German Windows Mobile 6os and therefore a German Keyboard Layout (QWERTZ).
I want to give this device to someone in the US, he has an AT&T Sim card.
First question, what ROM works better for him:
AT&T Tilt Rom
or
HTC Original Rom
In any case, whatever ROM I flash the device with he will need a Keyboard patch applied.
Any answers ?
Thanks for your help
Mike
ok,i think u should flash the ATT rom for him.maybe ATT rom would fit him better,there r many ATT softwares in the rom.
that u dont need to install any keyboard patch,it would be QWERTY layout~
but the type on your keyboard wouldnt match the layout,if you want the keys match the layout,u can fix it with my cab in floor 2, up to u.
Regards
Sheng
You are the Man! Thanks
So to be clear:
Hard CID Unlock, then flash the device with ATT Rom and then apply this cab:
Tilt QWERTYsheng's keyboard patch.cab
Correct?
Cheers
Mike
L2C said:
You are the Man! Thanks
So to be clear:
Hard CID Unlock, then flash the device with ATT Rom and then apply this cab:
Tilt QWERTYsheng's keyboard patch.cab
Correct?
Cheers
Mike
Click to expand...
Click to collapse
No thanks,after u flash the ATT ROM u need not to apply "Tilt QWERTYsheng's keyboard patch.cab" , and your device's layout is like a Tilt, but when u press the hard key "z"(between "t"and"u")on your keyboard it puts out "y",'cause your QWERTZ hard keyboard and Tile's keyboard are not the same,right?
and if you want to fix it ,u should apply the cab which i posted in floor 2,then while u press the hard key "z" (between "t"and"u"),your device puts out "z"
REGARDS
sheng
Hi Sheng
I flashed the AT&T Rom sucessfully, now in order to have the right keys assigned to the (hard-) keyboard I need to install: QWERTYsheng's keyboard patch.cab correct?
Cheers
Mike
oh ,i think u should install sheng's keyboard patch.cab, the first cab i attach in the floor 2
What do you mean by "Floor 2". Just maybe to be sure, can you attached it once more to your reply?
Thanks Sheng
Mike
hehe it means #2
here it is!
enjoys
Sheng
Hi Sheng
I installed the .cab from a microSD card installed into the device.
I turned it off completly and restarted it again, but the .cab doesnt seem to have an effect.
You said I need to reset it, how do I do this?
Mike
Mike:
I make a new cab that should be work ~ soo sorry about that i uploaded a wrong cab
pls try the new one
sheng
Hello all, I have a newly acquired Sprint Touch Pro and have been seeing a full manila upgrade floating around, should I upgrade to this or is it not necessary unless using custom themes? Also will it replace/override most of the current manila files? 18Mb seems pretty big for a cab file. Sorry for my ignorance and thanks in advance.
Edit/Delete Message
the same problem
I too aquire a mda vario 4 ( aka touch pro ) and i too dont want to flash my rom but only change to manila 2.1
i need a help from the forum friends how to upgrade to manila 2.1 or 2.5 without flashing my rom
thanxxxx in advance
Pleaseeee I need the HELPPPPPPPP !!!!
Please forum members , give me a way to deal with the problem !!!!
Thanxx in ADVANCE
Because of this angry attitude, you won't get any help. Perform a search and you shall find all the answers.
12gage said:
Hello all, I have a newly acquired Sprint Touch Pro and have been seeing a full manila upgrade floating around, should I upgrade to this or is it not necessary unless using custom themes? Also will it replace/override most of the current manila files? 18Mb seems pretty big for a cab file. Sorry for my ignorance and thanks in advance.
Edit/Delete Message
Click to expand...
Click to collapse
i just upgraded to the new manila after needing a hard reset for something unrelated and i love the new manila it is a lot better. at first it was slow but after some soft resets or changes in advconfig or installing swype (not sure which) it is now just as fast as before. i would recommend it but you may need to hard reset which is what held me up before.
12gage said:
Hello all, I have a newly acquired Sprint Touch Pro and have been seeing a full manila upgrade floating around, should I upgrade to this or is it not necessary unless using custom themes? Also will it replace/override most of the current manila files? 18Mb seems pretty big for a cab file. Sorry for my ignorance and thanks in advance.
Edit/Delete Message
Click to expand...
Click to collapse
bonnyinqingdao said:
Please forum members , give me a way to deal with the problem !!!!
Thanxx in ADVANCE
Click to expand...
Click to collapse
The new manilla's integrate themselves into the os alot more than the older ones, i would not advise installing 2.1 by cab, you are just asking for trouble and errors ect and it cant be uninstalled so once you installed it your stuck with it, either flash a new rom with the manila u want included or keep the original one, im using my own cooked rom with the original manilla, i dont need 2.1 or 2.5, neither of them were made for our device or work perfectly with it, so u mite as well use the manilla that was made for the device your using not a touch pro 2 or HD 2
pilgrim011 said:
Because of this angry attitude, you won't get any help. Perform a search and you shall find all the answers.
Click to expand...
Click to collapse
i did'nt mean to show angry face at all .. it was a mistake... we all the forum members are friends.. don't be annoyed
Thanxx A LOT.
mancsoulja said:
The new manilla's integrate themselves into the os alot more than the older ones, i would not advise installing 2.1 by cab, you are just asking for trouble and errors ect and it cant be uninstalled so once you installed it your stuck with it, either flash a new rom with the manila u want included or keep the original one, im using my own cooked rom with the original manilla, i dont need 2.1 or 2.5, neither of them were made for our device or work perfectly with it, so u mite as well use the manilla that was made for the device your using not a touch pro 2 or HD 2
Click to expand...
Click to collapse
Thanxxxxxxxxx a lot for your advice.. i too love my touch pro and the normal touch flo installed in it.. I'll remember your words
RE Questaining
mancsoulja said:
The new manilla's integrate themselves into the os alot more than the older ones, i would not advise installing 2.1 by cab, you are just asking for trouble and errors ect and it cant be uninstalled so once you installed it your stuck with it, either flash a new rom with the manila u want included or keep the original one, im using my own cooked rom with the original manilla, i dont need 2.1 or 2.5, neither of them were made for our device or work perfectly with it, so u mite as well use the manilla that was made for the device your using not a touch pro 2 or HD 2
Click to expand...
Click to collapse
Can in any way without harming my rom & slowering the system speed .. can I add tabs in the touch flo ( like calender , stock, etc )
thanks a lot in advance
I am running touchflo 2.1 (manila 2.1) installed from a cab and have no real problems at all. The only issue I have is with the Tachi dialer and that is only necessary if you wish to make calls from the people tab. If you install the 2.1 touchflo and don't like it you can use total commander and delete all the manila files and soft reset your phone. The manila files are the touchflo files and will be restored from the rom. Hope this helps
Thanxx A LOT.
mrfett79 said:
I am running touchflo 2.1 (manila 2.1) installed from a cab and have no real problems at all. The only issue I have is with the Tachi dialer and that is only necessary if you wish to make calls from the people tab. If you install the 2.1 touchflo and don't like it you can use total commander and delete all the manila files and soft reset your phone. The manila files are the touchflo files and will be restored from the rom. Hope this helps
Click to expand...
Click to collapse
Hi,
First of all, SORRY for posting here, I know it´s not okay. But I simply can´t get any answer at all to my question.
I want to know how to switch back to german hw-kb layout after flashing a WWE ROM. I already tried a CAB, but it didn´t change all of the keys. And reassigning every single key with some tools is possible but just annoying.
What about extracting this from a Stock ROM ?
And in general, what about doing such CABs for all languages and make a Sticky Post, like done with all Stock packages?
Have you tried this?
http://forum.xda-developers.com/showpost.php?p=2837568&postcount=1500
It seems as Schap's Advanced Config changes another registry key which only applies to older devices.
The above worked for me, Elite RC3 ROM on a german HTC Raphael.
You can modify the hardware keyboard layout in this Registry Key:
Go to HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD and change the value in the CurrLang attribute.
Go here http://msdn.microsoft.com/de-ch/goglobal/bb895996(en-us).aspx and find the desired value for your layout.
Hope this helps
I´m quite sure I tried this, but it didn´t work...I´ll try again and report back.
Would this tweak work for WM 6.5 hardware and software keyboard key mappings? At the moment I have official FR 6.1+2.1 on the phone (no cooped ROMs).
I want to download an English WM 6.5 ROM but keep the FR layout.
Please help me.
Thank you all in advance.
Johev said:
Would this tweak work for WM 6.5 hardware and software keyboard key mappings? At the moment I have official FR 6.1+2.1 on the phone (no cooped ROMs).
I want to download an English WM 6.5 ROM but keep the FR layout.
Please help me.
Thank you all in advance.
Click to expand...
Click to collapse
Its simple bro,Just Flash your desire rom and install This :http://forum.xda-developers.com/showthread.php?t=490290 to set up keyboard for your device fuze or raphael...
Then change this key:HKLM\HARDWARE\DEVICEMAP\KEYBD\CurLang
CurLang=1036 (look out to be in decimal)
With you registry editor(im using CeRegEditor)
Then soft reset your device and you are ready...
Im using also Fr layout in my raphael...
mixalhsxalk said:
Its simple bro,Just Flash your desire rom and install This :http://forum.xda-developers.com/showthread.php?t=490290 to set up keyboard for your device fuze or raphael...
Then change this key:HKLM\HARDWARE\DEVICEMAP\KEYBD\CurLang
CurLang=1036 (look out to be in decimal)
With you registry editor(im using CeRegEditor)
Then soft reset your device and you are ready...
Im using also Fr layout in my raphael...
Click to expand...
Click to collapse
Thanks a lot (+1 thank), I will do that and report back. It had to bee a Greek to help me (I'm half Greek).
ευχαριστω πολυ
Johev said:
Thanks a lot (+1 thank), I will do that and report back. It had to bee a Greek to help me (I'm half Greek).
ευχαριστω πολυ
Click to expand...
Click to collapse
hahahaha...Like it bro....:
It worked like a charm, all the keys are working, but I still have 2 things I would like to solve.
1) I would also like to have the soft keyboard changed from EN QWERTY to FR AZERTY
2) Is there a way to install the T9 dictionary for French too?
I have been searching for the .cab but I was not able to find one for WM6.5.
Any help would be appreciated.
dear friends
I have wm6.5 but it contains the normal wm6.5 dialer
I want to install Tachi dialer, I tried to install it, but it have a big buttons i think versions I got is vga compatable, so plz if any one have a cab file for a compatable version with wizard send me a link for it.
thanks in advance
search harder next time
http://forum.xda-developers.com/showthread.php?t=523856&highlight=dialer+skin
Hi everybody,
is it possible to extract the document tab from the sense 2.5 1922 and create a cab instead of flashing a new rom....
I missed only on my sense 2.5 1921 the document. Does anyone have an idea? Or a cab which he wants to provide?
hey sorry i don't have an answer for you but do you or anyone else know how to get thumnail view of each document file instead of file icons?
i tried several different roms and now using nhathoa's, but still getting icons of the file type not thumbnails.