Hi,
I have a German MDA Vario 3 (German - T-Mobile OS and German QWERTZ ÄÖÜ) and I need to flash it with an US/UK OS.
I assume after unlocking the CID I can flash the device with either the Generic HTC Rom or the AT&T Tilt Rom.
So far so good, but what happens to the German Keyboard Layout, this isn't the same as The Tilt or Genereic HTC Layout.
Any Ideas?
Thanks
Mike
hello L2C
pls have a try this method:
in the path [HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD]
change the "Curlang" data to 1031(Dec) or 407(Hex)
soft-reset~
if it doesnt work,pls tell me
i make a cab in case you havent a tool to edit registry
transfer the cab to kaiser and run it
softreset
Thanks for the swift help.
I am just hesitant to flash my device right now, I am unsure to use Soft SPL or Hard SPL.
Cheers
Mike
oh mike,you are welcome
i suggest u to flash the rom with hspl v1,in my opinion that's much safer than sspl.so far i've seen some flash rom unsuccessfully with sspl
u can follow pof's thread to get the hspl
if u flash AT&T Tilt Rom i think ur output would be not the same with ur german keyboard,because the LCID isnt the german one
then u could use the cab to fix it !
hope it can help u, i install the cab and my TyTNII's layout switches to QWERTZ
cheers~
Hi woohyuksheng,
thanks for your help, appreciate it!
One question, the cab you included in your post switches your QWERTY to QWERTZ, right?
But does it also switch QWERTZ to QWERTY (so back an fourth every time you install it?)
Cherrs
Mike
if yours is QWERTY originally,you patch the cab on your kaiser and after soft-reset that your keyboard output will become QWERTZ.
and of course u can remove the cab and give it a soft-reset,yours will be back to QWERTY.
in one word, this cab can only make your keyboard layout become QWERTZ,uninstall it,will become the original one.
regards~
Sheng
My keyboard is originally QWERTZ and I need a patch to make it QWERTY.
Sure that the one you posted will help me?
Cheers
Mike
oh in this case you want it QWERTY,that should be no problem~
try this cab
regards
Sheng
Hi Sheng,
thanks alot, I will try this later today.
I will post feedback
Mike
OK ,wait for your good message~
and one more choice u can take~
if u want it QWERTY like the Tilt, patch with this cab
the Tilt's QWERTY differs with the ordinary QWERTY
the symbol "@" and the "!" r upside down,maybe u can find it comparing the Tilt's pics with others~
regards
Sheng
Hi Sheng
I got one more question for you, maybe to make myself a bit clearer.
I got the German T-Mobile Vario 3 (German Windows Mobile 6os and therefore a German Keyboard Layout (QWERTZ).
I want to give this device to someone in the US, he has an AT&T Sim card.
First question, what ROM works better for him:
AT&T Tilt Rom
or
HTC Original Rom
In any case, whatever ROM I flash the device with he will need a Keyboard patch applied.
Any answers ?
Thanks for your help
Mike
ok,i think u should flash the ATT rom for him.maybe ATT rom would fit him better,there r many ATT softwares in the rom.
that u dont need to install any keyboard patch,it would be QWERTY layout~
but the type on your keyboard wouldnt match the layout,if you want the keys match the layout,u can fix it with my cab in floor 2, up to u.
Regards
Sheng
You are the Man! Thanks
So to be clear:
Hard CID Unlock, then flash the device with ATT Rom and then apply this cab:
Tilt QWERTYsheng's keyboard patch.cab
Correct?
Cheers
Mike
L2C said:
You are the Man! Thanks
So to be clear:
Hard CID Unlock, then flash the device with ATT Rom and then apply this cab:
Tilt QWERTYsheng's keyboard patch.cab
Correct?
Cheers
Mike
Click to expand...
Click to collapse
No thanks,after u flash the ATT ROM u need not to apply "Tilt QWERTYsheng's keyboard patch.cab" , and your device's layout is like a Tilt, but when u press the hard key "z"(between "t"and"u")on your keyboard it puts out "y",'cause your QWERTZ hard keyboard and Tile's keyboard are not the same,right?
and if you want to fix it ,u should apply the cab which i posted in floor 2,then while u press the hard key "z" (between "t"and"u"),your device puts out "z"
REGARDS
sheng
Hi Sheng
I flashed the AT&T Rom sucessfully, now in order to have the right keys assigned to the (hard-) keyboard I need to install: QWERTYsheng's keyboard patch.cab correct?
Cheers
Mike
oh ,i think u should install sheng's keyboard patch.cab, the first cab i attach in the floor 2
What do you mean by "Floor 2". Just maybe to be sure, can you attached it once more to your reply?
Thanks Sheng
Mike
hehe it means #2
here it is!
enjoys
Sheng
Hi Sheng
I installed the .cab from a microSD card installed into the device.
I turned it off completly and restarted it again, but the .cab doesnt seem to have an effect.
You said I need to reset it, how do I do this?
Mike
Mike:
I make a new cab that should be work ~ soo sorry about that i uploaded a wrong cab
pls try the new one
sheng
Related
HTC_Vox_ARA_1.27.415.4_4.1.13.47_02.98.90.exe
Do we have any interest in this?
Radio version: 2.98.90
ROM version: 1.27.415.4
Protocol vesrion: 4.1.13.47
Absolutely. Please upload on the FTP server. Thx!
(Using the USPL we are able to upgrade radio only)
im so interested too
i got an Arabic hardware keyboard layout that dosnt have software for Arabic characters . i hope you upload it soon. thanks alot.
here
JockyW
was just about to post that the dopod has a newer radio rom, but its just a mistake in the title. nice upload
do u mean that i can read the sms in arabic....???
can anyone answer me pls........
sayyas said:
do u mean that i can read the sms in arabic....???
Click to expand...
Click to collapse
I am not sure if you can read SMS in Arabic. All I know for sure is I can type them.
I just tried sending me a message in Arabic and it worked but didn't work when I used Google SMS.
Flashed this ROM last Friday, and haven't experienced any issues w/ it so far. It gives you an option to not install the Arabic packages, but also lets you know that if you do install them they can be disabled later on.
The best thing about this ROM vs the dopod one is the system font isn't abnormally large.
Kudos to the OP.
Also have not ran into the problem of continuous resetting like I did with the older ROM.
do u mean that i can read the sms in arabic after the new rom
sayyas said:
do u mean that i can read the sms in arabic after the new rom
Click to expand...
Click to collapse
I would say yes but it depends who is your service provider. I am in the US and I use at&t. If I send a arabic sms to somebody, they can read it assuming they have arabic support as well. When I sent it to a person in t-mobile, it came out gibberish.
jockyw2001 said:
Absolutely. Please upload on the FTP server. Thx!
(Using the USPL we are able to upgrade radio only)
Click to expand...
Click to collapse
I have my vox sim and cid unlocked. How can I upgrade radio only? I don't want to lose my polish rom version but I would like to have the latest radio version. How can I do that
Sakis
i dont know i try it today and it dont worked with me can anybody help me pls.........
sorry im new with rom update
the radio v is 4.1.13.39_02.83.90
wich one do i have to download
and do i have to flash it...and how????
help pls coz i love this phone bout i miss the arabic font
i flashed and its work thanx for all
Problem
I have install it and when it asked me about arabian i sad NO!! but i cannot write nothing becouse i have some kind of square in place of letters. When i install polish lang pack the letter appear but the "fn" and "caps" button doesn't work. why??
regards
edit: OMG!! what a shame!!! nevermind. I change xt9 and there it is!! :/
Luniopl said:
I have install it and when it asked me about arabian i sad NO!! but i cannot write nothing becouse i have some kind of square in place of letters. When i install polish lang pack the letter appear but the "fn" and "caps" button doesn't work. why??
regards
edit: OMG!! what a shame!!! nevermind. I change xt9 and there it is!! :/
Click to expand...
Click to collapse
I had the same problem, it the requirement to change t9 language should be in a readme file with the ROM
Tom
Sakis - there is a write up on the wiki about how to upgrade the radio only.
jocky - I cant get the link to work. Is there an alternate download location?
jocky - I cant get the link to work. Is there an alternate download location?
Click to expand...
Click to collapse
ftp://xdaupload:[email protected]/Smartphone/Vox
as with uk rom ive reconstructed the romanian rom.
you need to install uspl then run flash.exe in os folder.
Download link: http://rapidshare.com/files/104565623/orange-ro-1.22.rar.html
THX
many,many thanks.
hoyler30589 said:
as with uk rom ive reconstructed the romanian rom.
you need to install uspl then run flash.exe in os folder.
Download link: http://rapidshare.com/files/104565623/orange-ro-1.22.rar.html
Click to expand...
Click to collapse
NICE! I really like the orange plugin.. can this rom be in english? Or is it romanian only?
Or maybe figure a way to extract the orange homescreen..
Da9L said:
NICE! I really like the orange plugin.. can this rom be in english? Or is it romanian only?
Or maybe figure a way to extract the orange homescreen..
Click to expand...
Click to collapse
all roms have english in them so i think this one is no different. if we can find someone with a uk e650 with rom 1.22 then i can make the uk one. ill look into extracting the pluggin.
hoyler30589 said:
all roms have english in them so i think this one is no different. if we can find someone with a uk e650 with rom 1.22 then i can make the uk one. ill look into extracting the pluggin.
Click to expand...
Click to collapse
Sounds great! Would be really nice. Keep us informed in your progress !
problem
I have an issue with this ROM. I installed it after i used Dr Gonzo's 1.1 for a week. Everything went smooth, except one thing. After the ROM was installed and ready to use, i couldn't insert any letters.
From the 123 keyboard it would insert only numbers, no matter if i chose ABC, abc or xt9.
From the QWERTY keyboard it would simply not insert any numbers. Only numbers, with shift+letter.
Switched back to Dr Gonzo's now. What could have been the issue? Please help!
I think it could be connected to the keyboard layout somehow, or some sord of dictionary related to what letters corespond to which keys. Could this be the answer?
thank you
already twice in service for hardware repairing... therefore, after installing syrius4... this one is more than welcomed... who knows... for the third time?
Has anyone managed to convert the S11HT to English yet ?
I have searched the forums in vain - Who will rid us of this japanese OS ;-)
Don't mind being a beta tester btw ..
Rob
i was working on something similar, to port an english rom. but i cant make it work with the current radio of emobile.
stay alert for news.
Thanks I know a few people who are wanting to flash their S11HT
a few people have tried to cook the ROM but they can't seem to get the screen cal to work
Rob
Isaygarcia said:
i was working on something similar, to port an english rom. but i cant make it work with the current radio of emobile.
stay alert for news.
Click to expand...
Click to collapse
You could be come a hero to us english speakers living in Japan. I love my S11HT and have been happy with emobile's coverage my area except for the emobile black hole at Shoppers Plaza in Yokosuka. But I am occasionally frustrated with the Japanese interface.
tim
Can anyone please help ?
MODs could we move this thread to the Kaiser ROM developement section. Perhaps it would see a little more action in that area.
tim
sorry guys, i have been a bit busy ...
also i need a device (s11ht) to test the changes i made.
but just keep hoping
the last time i tried it, it didnt work but maybe is because i dont have a s11ht (i have a tytn2).
the radio of s11ht is different to the tytn2 one, (all commands .. all) because it needs to support the 1700 mhz band.
but at the moment, i got working some things (OS) on the tytn2.
just wait..
also, try to install a Diamond ROM into your s11ht and tellme what happens.
if nothing works, then we must wait for the xperia rom (because xperia supports the 1700 mhz band and should work with the s11ht Radio)
hehe
again sorry i was a bit busy (in the school.. hehe.. )
-Isay.
Now that we finally have a factory ROM to flash back to maybe someone can get this thing speaking english.
http://forum.xda-developers.com/showthread.php?t=410953
dejanet said:
Now that we finally have a factory ROM to flash back to maybe someone can get this thing speaking english.
http://forum.xda-developers.com/showthread.php?t=410953
Click to expand...
Click to collapse
Pretty interesting radio version you have there? Where did you get that from?
d e l e t e d
dejanet said:
Now that we finally have a factory ROM to flash back to maybe someone can get this thing speaking english.
http://forum.xda-developers.com/showthread.php?t=410953
Click to expand...
Click to collapse
Was hoping to get a Emonster shipped ROM that included the 1.63 radio.
AllTheWay said:
Was hoping to get a Emonster shipped ROM that included the 1.63 radio.
Click to expand...
Click to collapse
Sorry we were never able to get a copy of the original shipped ROM.
I can say on emobile the new radio is significantly better than the old one. I need to fix my sig.
Now we can make the Emonster english. I've tried this using both the L26_daimond and Hyperdragon III. The only thing I haven't been able to make work is display of Japanese Fonts. So if someones solves that life will be great. What you need to do:
First get hard SPL installed then
grap the 1.71 radio from this thread http://forum.xda-developers.com/showthread.php?t=410953 Thanks to AllTheWay for ripping the radio from the newest Emonster ROM
Get one of the new cooked ROMS I have tried L26_Diamond and HyberDragon III the Augest 4 version
after installing the ROM Install the radio rom from the above thread and you now have a working EMonster with everything in English.
Still need to solve the Japanese font problem or you won't be able to read emails from your Japanese or browse Japanese sites.
dejanet said:
Now we can make the Emonster english. I've tried this using both the L26_daimond and Hyperdragon III. The only thing I haven't been able to make work is display of Japanese Fonts. So if someones solves that life will be great. What you need to do:
First get hard SPL installed then
grap the 1.71 radio from this thread http://forum.xda-developers.com/showthread.php?t=410953 Thanks to AllTheWay for ripping the radio from the newest Emonster ROM
Get one of the new cooked ROMS I have tried L26_Diamond and HyberDragon III the Augest 4 version
after installing the ROM Install the radio rom from the above thread and you now have a working EMonster with everything in English.
Still need to solve the Japanese font problem or you won't be able to read emails from your Japanese or browse Japanese sites.
Click to expand...
Click to collapse
If you install Askal's "Let's Japan No.6", you can read Japanese in English rom. It includes Japanese font as well. After you install it, you need to change keyboard layout with registry editor.
I have tried let's Japan No. 6 and when I install it I can not use the red and green telephone keys to start and end calls.
dejanet said:
I have tried let's Japan No. 6 and when I install it I can not use the red and green telephone keys to start and end calls.
Click to expand...
Click to collapse
You need to fix the registry after install let's Japan No.6.
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts\e0010411]
“Keyboard Layout”=”00000409″
Or you can get the cab file to fix it from here;
http://sony-ericsson.air-nifty.com/g900/2007/08/lets_japan_no6.html
(If you click "こちら" in the text, you can get the cab file to fix this problem.)
tyoshi said:
You need to fix the registry after install let's Japan No.6.
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts\e0010411]
“Keyboard Layout”=”00000409″
Or you can get the cab file to fix it from here;
http://sony-ericsson.air-nifty.com/g900/2007/08/lets_japan_no6.html
(If you click "こちら" in the text, you can get the cab file to fix this problem.)
Click to expand...
Click to collapse
Thank you now my life is nearly perfect. How I'm I going to get any work done with all the cool ROM's to try.
S11HT emonster for beginner
Hi. I have had the S11HT emonster for a year. I would like to change it to English but it seems like it requires a lot of knowledge that I don't have. Does anyone have any suggestions. I read the post
http://forum.xda-developers.com/showthread.php?t=401212&page=2
but it is not so easy to follow.
THanKS
kyushuMan said:
Hi. I have had the S11HT emonster for a year. I would like to change it to English but it seems like it requires a lot of knowledge that I don't have. Does anyone have any suggestions. I read the post
http://forum.xda-developers.com/showthread.php?t=401212&page=2
but it is not so easy to follow.
THanKS
Click to expand...
Click to collapse
This thread will help you.
http://forum.xda-developers.com/showthread.php?t=433835
1. Install Hard-SPL
2. Choose english rom which you want and install it.
You can choose any cooked rom in this forum. But WM6.1 should be much easier to install Japanese font.
3. Install Askal's "let's Japan No.6"
You can search it with Google.
4. Get the cab file to fix keyboard problem
http://sony-ericsson.air-nifty.com/g...japan_no6.html
That's it.
kaiser 140
kaiser 140 japani
S11HT_firm_V2_6_881_0 english rom
i need English ROM.plz pro
Hello All,
I Jus received one SPV E650 from a friend and now I want to flash this "Orange" ROM to HTC ROM.
Because the keyboard is AZERTY, I need French ROM.
I did some search on this forum but I don't find this subject (sorry if I missed some topics)
I understood this is a special way to flash a Orange SPV E650 ?
Could give me a link for this French rom please ?
Thanks for your help !
You don't need a French ROM for AZERTY, you can install the keyboard layout on any ROM!
My NeoRose has French!
Thanks for your answer. I'll try it this evening.
Just the time to read deeply your topic to know how install that.
Yes, look in the Wiki for a description with pictures for USPL and flashing!
Ok, it's done and works prefectly
I just need to swap Qwerty keyboard to my Azerty
But I saw somewhere it's possible easily (if someone can link the topic ... )
Thanks !
If you flashed NeoRose, then it's in Documents\KeyboardLayouts
Yes I flashed my Vox with NeoRose.
I saw 4 files under Documents\KeyboardLayouts. I suppose I need to install another one for french keyboard ? but I don't find it...
Sorry, I'm pure newbie for this kind on action, I'm trying to learn very fast
You need to install Keyboard-layout-040c
Hi !
It's works perfect
So now I have the standard template
and if I want to change it to have
What is the action to do ?
Thanks for your great help !
Ok I found all that.
Now just to use it
Thanks again for your help
Hi,
First of all, SORRY for posting here, I know it´s not okay. But I simply can´t get any answer at all to my question.
I want to know how to switch back to german hw-kb layout after flashing a WWE ROM. I already tried a CAB, but it didn´t change all of the keys. And reassigning every single key with some tools is possible but just annoying.
What about extracting this from a Stock ROM ?
And in general, what about doing such CABs for all languages and make a Sticky Post, like done with all Stock packages?
Have you tried this?
http://forum.xda-developers.com/showpost.php?p=2837568&postcount=1500
It seems as Schap's Advanced Config changes another registry key which only applies to older devices.
The above worked for me, Elite RC3 ROM on a german HTC Raphael.
You can modify the hardware keyboard layout in this Registry Key:
Go to HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD and change the value in the CurrLang attribute.
Go here http://msdn.microsoft.com/de-ch/goglobal/bb895996(en-us).aspx and find the desired value for your layout.
Hope this helps
I´m quite sure I tried this, but it didn´t work...I´ll try again and report back.
Would this tweak work for WM 6.5 hardware and software keyboard key mappings? At the moment I have official FR 6.1+2.1 on the phone (no cooped ROMs).
I want to download an English WM 6.5 ROM but keep the FR layout.
Please help me.
Thank you all in advance.
Johev said:
Would this tweak work for WM 6.5 hardware and software keyboard key mappings? At the moment I have official FR 6.1+2.1 on the phone (no cooped ROMs).
I want to download an English WM 6.5 ROM but keep the FR layout.
Please help me.
Thank you all in advance.
Click to expand...
Click to collapse
Its simple bro,Just Flash your desire rom and install This :http://forum.xda-developers.com/showthread.php?t=490290 to set up keyboard for your device fuze or raphael...
Then change this key:HKLM\HARDWARE\DEVICEMAP\KEYBD\CurLang
CurLang=1036 (look out to be in decimal)
With you registry editor(im using CeRegEditor)
Then soft reset your device and you are ready...
Im using also Fr layout in my raphael...
mixalhsxalk said:
Its simple bro,Just Flash your desire rom and install This :http://forum.xda-developers.com/showthread.php?t=490290 to set up keyboard for your device fuze or raphael...
Then change this key:HKLM\HARDWARE\DEVICEMAP\KEYBD\CurLang
CurLang=1036 (look out to be in decimal)
With you registry editor(im using CeRegEditor)
Then soft reset your device and you are ready...
Im using also Fr layout in my raphael...
Click to expand...
Click to collapse
Thanks a lot (+1 thank), I will do that and report back. It had to bee a Greek to help me (I'm half Greek).
ευχαριστω πολυ
Johev said:
Thanks a lot (+1 thank), I will do that and report back. It had to bee a Greek to help me (I'm half Greek).
ευχαριστω πολυ
Click to expand...
Click to collapse
hahahaha...Like it bro....:
It worked like a charm, all the keys are working, but I still have 2 things I would like to solve.
1) I would also like to have the soft keyboard changed from EN QWERTY to FR AZERTY
2) Is there a way to install the T9 dictionary for French too?
I have been searching for the .cab but I was not able to find one for WM6.5.
Any help would be appreciated.