Hi,
First of all, SORRY for posting here, I know it´s not okay. But I simply can´t get any answer at all to my question.
I want to know how to switch back to german hw-kb layout after flashing a WWE ROM. I already tried a CAB, but it didn´t change all of the keys. And reassigning every single key with some tools is possible but just annoying.
What about extracting this from a Stock ROM ?
And in general, what about doing such CABs for all languages and make a Sticky Post, like done with all Stock packages?
Have you tried this?
http://forum.xda-developers.com/showpost.php?p=2837568&postcount=1500
It seems as Schap's Advanced Config changes another registry key which only applies to older devices.
The above worked for me, Elite RC3 ROM on a german HTC Raphael.
You can modify the hardware keyboard layout in this Registry Key:
Go to HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD and change the value in the CurrLang attribute.
Go here http://msdn.microsoft.com/de-ch/goglobal/bb895996(en-us).aspx and find the desired value for your layout.
Hope this helps
I´m quite sure I tried this, but it didn´t work...I´ll try again and report back.
Would this tweak work for WM 6.5 hardware and software keyboard key mappings? At the moment I have official FR 6.1+2.1 on the phone (no cooped ROMs).
I want to download an English WM 6.5 ROM but keep the FR layout.
Please help me.
Thank you all in advance.
Johev said:
Would this tweak work for WM 6.5 hardware and software keyboard key mappings? At the moment I have official FR 6.1+2.1 on the phone (no cooped ROMs).
I want to download an English WM 6.5 ROM but keep the FR layout.
Please help me.
Thank you all in advance.
Click to expand...
Click to collapse
Its simple bro,Just Flash your desire rom and install This :http://forum.xda-developers.com/showthread.php?t=490290 to set up keyboard for your device fuze or raphael...
Then change this key:HKLM\HARDWARE\DEVICEMAP\KEYBD\CurLang
CurLang=1036 (look out to be in decimal)
With you registry editor(im using CeRegEditor)
Then soft reset your device and you are ready...
Im using also Fr layout in my raphael...
mixalhsxalk said:
Its simple bro,Just Flash your desire rom and install This :http://forum.xda-developers.com/showthread.php?t=490290 to set up keyboard for your device fuze or raphael...
Then change this key:HKLM\HARDWARE\DEVICEMAP\KEYBD\CurLang
CurLang=1036 (look out to be in decimal)
With you registry editor(im using CeRegEditor)
Then soft reset your device and you are ready...
Im using also Fr layout in my raphael...
Click to expand...
Click to collapse
Thanks a lot (+1 thank), I will do that and report back. It had to bee a Greek to help me (I'm half Greek).
ευχαριστω πολυ
Johev said:
Thanks a lot (+1 thank), I will do that and report back. It had to bee a Greek to help me (I'm half Greek).
ευχαριστω πολυ
Click to expand...
Click to collapse
hahahaha...Like it bro....:
It worked like a charm, all the keys are working, but I still have 2 things I would like to solve.
1) I would also like to have the soft keyboard changed from EN QWERTY to FR AZERTY
2) Is there a way to install the T9 dictionary for French too?
I have been searching for the .cab but I was not able to find one for WM6.5.
Any help would be appreciated.
Related
Anyone here willing to cook a German Rom? Don't know if O2 will bring one ever. English Rom with German keyboard sucks
No, it works
I´ve got WM6 MB and after hardreset I installed "hadesgermanlanguagepack" and it works. German wrodsuggest, ä,ö,ü by pressing symbol....
papamopps said:
I´ve got WM6 MB and after hardreset I installed "hadesgermanlanguagepack" and it works. German wrodsuggest, ä,ö,ü by pressing symbol....
Click to expand...
Click to collapse
hi, if it is not much trouble, could you please extract that language pack from the ext. rom and send it to me? I'd really appreciate it!
my email: [email protected]
it is not my work. but you it is.
papamopps said:
it is not my work. but you it is.
Click to expand...
Click to collapse
issuses with this cab?
It set all registry hacks and everything, so you get german keyboard, german sym and wordsuggest. i´ve been running it on every wm6 rom (orwell, underground, mb and now faria) it works, no issus. Just fine, for me. But you can also change everything manually and put in only sym.txt but hten you have no wordsuggest.
hope that in april will came out a full wm6 german rom
papamopps said:
It set all registry hacks and everything, so you get german keyboard, german sym and wordsuggest. i´ve been running it on every wm6 rom (orwell, underground, mb and now faria) it works, no issus. Just fine, for me. But you can also change everything manually and put in only sym.txt but hten you have no wordsuggest.
Click to expand...
Click to collapse
software keypad is almost y<=>z and other..
Hi,
I have a German MDA Vario 3 (German - T-Mobile OS and German QWERTZ ÄÖÜ) and I need to flash it with an US/UK OS.
I assume after unlocking the CID I can flash the device with either the Generic HTC Rom or the AT&T Tilt Rom.
So far so good, but what happens to the German Keyboard Layout, this isn't the same as The Tilt or Genereic HTC Layout.
Any Ideas?
Thanks
Mike
hello L2C
pls have a try this method:
in the path [HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD]
change the "Curlang" data to 1031(Dec) or 407(Hex)
soft-reset~
if it doesnt work,pls tell me
i make a cab in case you havent a tool to edit registry
transfer the cab to kaiser and run it
softreset
Thanks for the swift help.
I am just hesitant to flash my device right now, I am unsure to use Soft SPL or Hard SPL.
Cheers
Mike
oh mike,you are welcome
i suggest u to flash the rom with hspl v1,in my opinion that's much safer than sspl.so far i've seen some flash rom unsuccessfully with sspl
u can follow pof's thread to get the hspl
if u flash AT&T Tilt Rom i think ur output would be not the same with ur german keyboard,because the LCID isnt the german one
then u could use the cab to fix it !
hope it can help u, i install the cab and my TyTNII's layout switches to QWERTZ
cheers~
Hi woohyuksheng,
thanks for your help, appreciate it!
One question, the cab you included in your post switches your QWERTY to QWERTZ, right?
But does it also switch QWERTZ to QWERTY (so back an fourth every time you install it?)
Cherrs
Mike
if yours is QWERTY originally,you patch the cab on your kaiser and after soft-reset that your keyboard output will become QWERTZ.
and of course u can remove the cab and give it a soft-reset,yours will be back to QWERTY.
in one word, this cab can only make your keyboard layout become QWERTZ,uninstall it,will become the original one.
regards~
Sheng
My keyboard is originally QWERTZ and I need a patch to make it QWERTY.
Sure that the one you posted will help me?
Cheers
Mike
oh in this case you want it QWERTY,that should be no problem~
try this cab
regards
Sheng
Hi Sheng,
thanks alot, I will try this later today.
I will post feedback
Mike
OK ,wait for your good message~
and one more choice u can take~
if u want it QWERTY like the Tilt, patch with this cab
the Tilt's QWERTY differs with the ordinary QWERTY
the symbol "@" and the "!" r upside down,maybe u can find it comparing the Tilt's pics with others~
regards
Sheng
Hi Sheng
I got one more question for you, maybe to make myself a bit clearer.
I got the German T-Mobile Vario 3 (German Windows Mobile 6os and therefore a German Keyboard Layout (QWERTZ).
I want to give this device to someone in the US, he has an AT&T Sim card.
First question, what ROM works better for him:
AT&T Tilt Rom
or
HTC Original Rom
In any case, whatever ROM I flash the device with he will need a Keyboard patch applied.
Any answers ?
Thanks for your help
Mike
ok,i think u should flash the ATT rom for him.maybe ATT rom would fit him better,there r many ATT softwares in the rom.
that u dont need to install any keyboard patch,it would be QWERTY layout~
but the type on your keyboard wouldnt match the layout,if you want the keys match the layout,u can fix it with my cab in floor 2, up to u.
Regards
Sheng
You are the Man! Thanks
So to be clear:
Hard CID Unlock, then flash the device with ATT Rom and then apply this cab:
Tilt QWERTYsheng's keyboard patch.cab
Correct?
Cheers
Mike
L2C said:
You are the Man! Thanks
So to be clear:
Hard CID Unlock, then flash the device with ATT Rom and then apply this cab:
Tilt QWERTYsheng's keyboard patch.cab
Correct?
Cheers
Mike
Click to expand...
Click to collapse
No thanks,after u flash the ATT ROM u need not to apply "Tilt QWERTYsheng's keyboard patch.cab" , and your device's layout is like a Tilt, but when u press the hard key "z"(between "t"and"u")on your keyboard it puts out "y",'cause your QWERTZ hard keyboard and Tile's keyboard are not the same,right?
and if you want to fix it ,u should apply the cab which i posted in floor 2,then while u press the hard key "z" (between "t"and"u"),your device puts out "z"
REGARDS
sheng
Hi Sheng
I flashed the AT&T Rom sucessfully, now in order to have the right keys assigned to the (hard-) keyboard I need to install: QWERTYsheng's keyboard patch.cab correct?
Cheers
Mike
oh ,i think u should install sheng's keyboard patch.cab, the first cab i attach in the floor 2
What do you mean by "Floor 2". Just maybe to be sure, can you attached it once more to your reply?
Thanks Sheng
Mike
hehe it means #2
here it is!
enjoys
Sheng
Hi Sheng
I installed the .cab from a microSD card installed into the device.
I turned it off completly and restarted it again, but the .cab doesnt seem to have an effect.
You said I need to reset it, how do I do this?
Mike
Mike:
I make a new cab that should be work ~ soo sorry about that i uploaded a wrong cab
pls try the new one
sheng
Anybody please Help !
Yesterday night I flashed my Kaiser with HardSPL 1.1 then Schaps 4.31.
Everything went fine, after reboot I found myself in the expected purple theme, I did a hard reset, a little bit of config and... and nothing ! No network, couldn't connect to Orange network
I tried manual network config, schaps assistant, no way !
Radio is 1.27.14.32, hint : camera works fine (I read in the forums that network and camera are linked, sort of...)
Can anybody help me ?
Thanks in advance,
lpg
i hope many friends here will help u. just one thing for sure.
did u tried other radio version ?
hang.tuah said:
i hope many friends here will help u. just one thing for sure.
did u tried other radio version ?
Click to expand...
Click to collapse
I hope that too
No other radio yet, the only other 6.0 I have is 1.27.15.32, I will try it but at present I'm at work and i can't disable the anti virus, which I think is not recommanded while flashing...?
... maybe I can flash the radio with a SD ? (no PC environment problem then ?)
Anyway thanks for your message, I feel less alone with my brick
lpg
Hello,
Here at work i can flash even with the AV (McAfee).
You can find radio only here (http://wiki.xda-developers.com/index.php?pagename=Kaiser_Radio)
Why don't you try WM6.1 ? There's many very good one here.
Anyway if you want orange rom there's one. Look at this thread http://forum.xda-developers.com/showthread.php?t=414238 where you can download French or English Orange Rom WM6.1.
Amicalement ,
ernest33 said:
Hello,
Here at work i can flash even with the AV (McAfee).
You can find radio only here (http://wiki.xda-developers.com/index.php?pagename=Kaiser_Radio)
Click to expand...
Click to collapse
I also have MacAfee so I'll try to flash another radio
ernest33 said:
Why don't you try WM6.1 ? There's many very good one here.
Anyway if you want orange rom there's one. Look at this thread http://forum.xda-developers.com/showthread.php?t=414238 where you can download French or English Orange Rom WM6.1.
Amicalement ,
Click to expand...
Click to collapse
THX for your answer ernest33,
lpg
I was tempted by 6.1 but I want a french one and the only I found are ansar's and noThrills's.
I have no return on these ROM's behaviour on Orange in France and I thought it was best to start playing with a localized ROM.
May I ask which one you are using ?
If I'm stuck I may try the recently released official Orange 6.1, but I'm borred with Orange's crap stuff.
Currently i use Hyperdragon III (4/8/2008)(http://forum.xda-developers.com/showthread.php?t=397121). It's in english, but It's the best rom i found (i have tried many of them...). Maybe one day a cooker will be able to provide an HyperDragon in french ...
Since have a "Ten by Orange" abonnement the only thing i can't use it's EasyWeb (it's just OperaMini with startup page by Orange/Ten) and WLMail a java client for Hotmail.
But the rest work ok.
Internet work very well with (IE, Opera 9.5, Opera Mini...) and to have access to the OrangeWorld portal there's one thing to do about the "User Agent".
About the mail i can install the cab from ten by orange and use their tool to configure three mail box....but you can look at your mail with Opera (by ex) if you have a webmail (GMail, LaPoste.net, ...).
About tchat you can use the MSN Messenger (but the one provided by the cab from orange (3169.cab for the Kaiser)).
Ernest33
PS : Since Opera build 1780 i can access the orange portal with Opera 9.5 (i think it can use the user agent from IE now)(http://forum.xda-developers.com/showthread.php?t=401643)
ernest33 said:
Currently i use Hyperdragon III (4/8/2008)(http://forum.xda-developers.com/showthread.php?t=397121). It's in english, but It's the best rom i found (i have tried many of them...)...
Click to expand...
Click to collapse
Thank you very much for these information !
Do you have any problem with keyboard and french ? did you use the registry tweak to make it work with french azerty hard and soft kbd ?
Meanwhile I tried to install radio 1.27.12.17 : no success.
I'm now trying new Orange 6.1 ROM, hope it'll work...
Cheers
lpg
At last !!!
The Orange 6.1 ROM works !
First it means that my Kaiser is not bricked , then it also means I can try other ROMs and feel safe because I should be able to restore a working config, nice!
BTW I'm still with hardSPL 1.1 (AT) does anyone know if I can keep it or should I move to 3.28 since I now have a 6.1 ROM ?
lpg
I've seen this behavior couple of time,
I just had to enable the plane mode and redisable it... Radio was back !
(don't really know/understand why, but it did the trick)
sebbes said:
I've seen this behavior couple of time,
I just had to enable the plane mode and redisable it... Radio was back !
(don't really know/understand why, but it did the trick)
Click to expand...
Click to collapse
This is interesting to note, matter of bad init ? I'll try it if it happens again with another ROM, THX sebbes.
lpg
I woke up to a similar problem today, different rom and radio though.. I was running ROMeOS and 1.58.25.17, woke up this morning to no signal. A few soft resets and 2 radios later, still no service. Any ideas? Was working fine yesterday.
Sigh, also just hard reset. No difference.
Ah ah ah elpeygey back on the air
elpeygey said:
The Orange 6.1 ROM works !
First it means that my Kaiser is not bricked , then it also means I can try other ROMs and feel safe because I should be able to restore a working config, nice!
BTW I'm still with hardSPL 1.1 (AT) does anyone know if I can keep it or should I move to 3.28 since I now have a 6.1 ROM ?
lpg
Click to expand...
Click to collapse
That's sound good
For HyperDragon i have 3.56 (http://forum.xda-developers.com/showthread.php?t=396922).
About the keyboard :
Software : I have buy a soft keyboard named VGAKEY (http://vgakey.net/web/index.php?enhome) The price is about 3€ ) it work very very well and support many many languages.
Hardware : Using Shap Advanced Config you can put the keyboard in french.
I'm looking for a french dictionary for the keyboard now
Amicalement,
Ernest33
Edit : I found this to have french dictionnary and keyboard (seem to work very well ) (http://forum.xda-developers.com/showthread.php?t=345426).
Anyone that can upload a swedish rom. it can be the original. just need the swedish hardware keyboard
thx
isent there anyone with an swedish rom. pls really need one
Here is my Swedish rom dumped. I am not very skilled in the kitchen so I haven´t made it flashable with rapahel kitchen but if you only take some time to read the guides I think you can make it. I work too much so I can´t spend that time myself
http://rapidshare.com/files/144333238/Raphael_1.90.413.4_SVE.part1.rar
http://rapidshare.com/files/144334323/Raphael_1.90.413.4_SVE.part2.rar
I have tested the kitchen and made a flashable rom
http://rapidshare.com/files/144382192/Raphael_1.90_SVE_flashable.part1.rar
http://rapidshare.com/files/144377613/Raphael_1.90_SVE_flashable.part2.rar
It works
oki was it difficult to do it. strange question but how big is the chance it will work u think. ... and thank you very much, really nice
sluden said:
oki was it difficult to do it. strange question but how big is the chance it will work u think. ... and thank you very much, really nice
Click to expand...
Click to collapse
I don´t have a clue but I think it will work. Did this with my old Tytn II and then it worked and I don´t think the Touch Pro is so different
I worked. thank you so very much. thank you thank you........
Thank you for sharing the rom!
sluden said:
I worked. thank you so very much. thank you thank you........
Click to expand...
Click to collapse
Have you tested everything so all works ?
no not everything. but the thing i use the most, i can test everything later on today, after work.
/christoffer
sluden said:
no not everything. but the thing i use the most, i can test everything later on today, after work.
/christoffer
Click to expand...
Click to collapse
The rom you flashed your Touch Pro with, was is much faster than the stock swedish rom?
r u from sweden, then we can type swedish...
sluden said:
r u from sweden, then we can type swedish...
Click to expand...
Click to collapse
yes if we send private messages - in threads only english are allowed
aha, didnt know that. no i didnt see much difference. but i noticed that your rom version was 1.66 something. my old original was 1.94 and swedish. that means there is a newer one
sluden said:
aha, didnt know that. no i didnt see much difference. but i noticed that your rom version was 1.66 something. my old original was 1.94 and swedish. that means there is a newer one
Click to expand...
Click to collapse
it is 1.94, I just didn´t change the version info when cooking
easycure1974 said:
I have tested the kitchen and made a flashable rom
http://rapidshare.com/files/144382192/Raphael_1.90_SVE_flashable.part1.rar
http://rapidshare.com/files/144377613/Raphael_1.90_SVE_flashable.part2.rar
It works
Click to expand...
Click to collapse
Hai!
Do you think that you could upload theese files on any other website?
Seing how there's a 1download limit as a free-user on rapidshare.
Thanks!
sluden said:
Anyone that can upload a swedish rom. it can be the original. just need the swedish hardware keyboard
thx
Click to expand...
Click to collapse
You can make a edit to the registry to have the hardware keyboard in swedish.
HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD\
You want to change CurLang to 1044 instead of what is there now, softreset and you have swedish hardware keyboard.
tsaros-se said:
You can make a edit to the registry to have the hardware keyboard in swedish.
HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD\
You want to change CurLang to 1044 instead of what is there now, softreset and you have swedish hardware keyboard.
Click to expand...
Click to collapse
Are you sure this works?
And is there a way to change the actual language of the device?
I mean, to change -everything- in the phone from English to Swedish,
because if it does, I'm going back to NATF's rom. C:
thanks!
EDIT: Also, does this enable the Swedish T9?
I have spent two days trying to find a Swedish rom and so far RomeOS2 was best one, only problem is the swedish rom is no longer to be found! I tried all tweaks and hacks to get swedish menus and languages on english roms, but without any good results.
Anyone have a Swedish rom to share? All links I've found so far are dead...
Here http://dl4.htc.com/RomCode/\HTC Tou...igned_Raphael_52.58.25.30_1.11.25.01_Ship.exe
or enter you SN here http://www.htc.com/europe/SupportDownload.aspx?p_id=140&cat=2&dl_id=501
SHIP_NORMAN_AP_U_01_10_05R_MODEM4_U_40_11_40R_12_USNORMAN25RTDER2W611A002_1FF-Enterprise-German_3801569218
Filename: SHIP_NORMAN_AP_U_01_10_05R_MODEM4_U_40_11_40R_12_USNORMAN25RTDER2W611A002_1FF-Enterprise-German_3801569218.sbf
Creation Date: 09/17/2008 00:13:50
File size: 86474837
RAM DL Version: N / A
Bootloader Version: N / A
Platform: UMTS OMAP
HAB Type: Signed Production
default language: deutsch (can be changed to english from the settings)
default keyboard layout:qwertz (can be changed to qwerty by changing 2 registry values only)
ROM Part1/2
http://cid-b3681f73a1295f37.skydriv...^_1FF-Enterprise-German^_3801569218.part1.rar
ROM Part2/2
http://cid-b3681f73a1295f37.skydriv...^_1FF-Enterprise-German^_3801569218.part1.rar
or download here:
http://www.4shared.com/file/214948205/a623531d/MODEM4_U_40_11_40R_12.html
RSD Lite 4.2 + Patch (program you need to flash your q9h)
http://cid-b3681f73a1295f37.skydrive.live.com/self.aspx/Publiczny/Q9^_Tools/RSDLite 4.2 + Patch.zip
or download here:
http://www.4shared.com/file/214948205/a623531d/MODEM4_U_40_11_40R_12.html
How to change keyboard layout from QWERTZ to QWERTY:
- HKCU\ControlPanel\Keybd\DefaultLayout -> change it 00000409
- HKLM\System\CurrentControlSet\Control\Layouts\e001ffff\Keyboard Layout -> change to 00000409
- Reboot... you now have the latest and greatest wm6.1 english rom!
thanks to our friend Patryk Kucharski for all the files! this man is genius!!!
download link to wm6.0 rom MODEM4_U_40.03.07R_01 (if you want to go back to stock rom, working for philippines q9h w/ network settings options & other asian/wwe networks.)
http://www.4shared.com/file/197689321/c5209aed/MODEM4_U_400307R_01.html
Motorola Driver:
http://www.4shared.com/file/235346557/9503886d/Motorola_Consumer_Driver_Insta.html
Here are some screenshots of my Q9H w/ wm6.1 firmware installed:
must be my lucky day, just as i was looking to update my moto q9h and was going to initiate a search for roms, u post this.
Flashed and working good.
Thanks.
kingmabuto said:
must be my lucky day, just as i was looking to update my moto q9h and was going to initiate a search for roms, u post this.
Flashed and working good.
Thanks.
Click to expand...
Click to collapse
ur welcome my friend.
Hi all!
Is this rom compatible with Moto Q8 (black GSM)??
marcelotorres said:
Hi all!
Is this rom compatible with Moto Q8 (black GSM)??
Click to expand...
Click to collapse
no, they are very much different. don't ever try, it will break your q8.
posted link to wm6.0 stock rom
it's in the first post. enjoy flashing...
works like a charm!
hmmm
works like he just sayd up.
When i try to change with "IBE_Registry_Editor_Smartphone" application my keyboard, after restart, does not work any key.
When i try to change with other software does not save the changes after reboot.
I have a Portuguese Motorola Q9h.
Someone can help me? With this firmware i have the "y" and "z" error...
edit:
i used resco explorer and just worked fine DDDDDDDDDD
Migael2 said:
When i try to change with "IBE_Registry_Editor_Smartphone" application my keyboard, after restart, does not work any key.
When i try to change with other software does not save the changes after reboot.
I have a Portuguese Motorola Q9h.
Someone can help me? With this firmware i have the "y" and "z" error...
edit:
i used resco explorer and just worked fine DDDDDDDDDD
Click to expand...
Click to collapse
How can i change language from german to english.. as i dont understand german
Excellent post. Just what I needed. Thanks alot!
pg_eng said:
How can i change language from german to english.. as i dont understand german
Click to expand...
Click to collapse
dude, you need to scroll down towards the settings and try to like read the choices as if it is in english. you need to go to language settings and select us english or something like that then after reboot you are in for a ride... goodluck!
Thanks very much!
Thank you very much! I just got my Motorola Q9h after 3 years of decision With your ROM the marketplace and Windows live now fully works! Didn´t work for me with 6.0! Really great work!
If you have 6.5 let me know
hello
The WM6.5 exist for moto Q9
first you must flash your device with based rom
avaible here --> http://cid-b3681f73a1295f37.skydrive.live.com/browse.aspx/Publiczny/Q9%5E_Tools/WM%206.5%20rom/based%5E_rom
files to be download
Q9h_AP_U_01.01.03R_Vodafone.part1.rar
Q9h_AP_U_01.01.03R_Vodafone.part2.rar
and next you must flash this files avaible on this -->http://cid-b3681f73a1295f37.skydrive.live.com/browse.aspx/Publiczny/Q9%5E_Tools/WM%206.5%20rom
files to be download:
28004.part1.rar
28004.part2.rar
Remeber you mus use rsdLite ver 4.5.3 avaible here ->http://cid-b3681f73a1295f37.skydrive.live.com/browse.aspx/Publiczny/Q9^_Tools works fine under xp ( with vista/7 i have couple errors like cant't write rom)
Default lang is china but in regional option avaible is english .....
This rom is very quick and stable without simlock ....
chears
Patryk Kucharski
Hi Patryk,
Thanks a lot! But the links you gave me bring me to an "XML" error (
Would be great if you could post some other... I am really curious in trying this out!
Best regards,
Chris
Hello
This link shuld work fine many users use this link and works fine .... maybe try use difrent browser like IE
tranzystor_82 said:
Hello
This link shuld work fine many users use this link and works fine .... maybe try use difrent browser like IE
Click to expand...
Click to collapse
Okay... I´ll try at a friend´s as I am using Linux
pg_eng said:
How can i change language from german to english.. as i dont understand german
Click to expand...
Click to collapse
Go to settings, on the start menu - (the tool icon) and then press:
7-7-2
tranzystor_82 said:
hello
The WM6.5 exist for moto Q9
first you must flash your device with based rom
avaible here -->
files to be download
Q9h_AP_U_01.01.03R_Vodafone.part1.rar
Q9h_AP_U_01.01.03R_Vodafone.part2.rar
and next you must flash this files avaible on this -->
files to be download:
28004.part1.rar
28004.part2.rar
Remeber you mus use rsdLite ver 4.5.3 avaible here -> works fine under xp ( with vista/7 i have couple errors like cant't write rom)
Default lang is china but in regional option avaible is english .....
This rom is very quick and stable without simlock ....
chears
Patryk Kucharski
Click to expand...
Click to collapse
I dont like this wm6.5 verson. Still have some things in chinese after change language, just like the "new sms" and "new mms". Other problem on this firmware is the branding...
but that chinese windows cant change font to standart and change became kanjui font and i dont understand
I wrongly flashed my Q9h with WM 6.1 AT&T updates with sim lock from motorola software update site. Now my device is locked. How to remove this lock? Anyone can help?