Hello..I have HTC p3400. I have Brought this phone from DUBAI.And right now i am in INDIA.
There was wm 5 in it.but i was trying to update to WM6.It was successful.But Due to some SMS problem i have shown it to HTC-authorized service center.they try it change the operating system wm6.1 to wm5.5 and during ROM UPGRADE process the phone is stuck in boot logger screen...! nothing else happening ..!
I have putted the phone in ideal condition for 24 hours and then try to install wm6.1.But nothing is happening...it stuck on boot logger Screen.
Now what is the solution for this ?
my alternate email id id--removed email address--
Forward Message
mmmm...
Does HTC accept your phone to repair?
well i think the warranty isnt available hahaha stupid question sorry...
What does HTC do to your phone?,
Maybe your phone was relocked! and when you try to upgrade BUM! bricks! well many people can say its not bricked.... cause it has bootloader...
but this cant be answered if you dont give us more information...
so...
What does the IPL says? OMBL????
It says formatting? why?
Tell us the entire history.... and... please erase your email from the post... if you wnat to have a personal help... go to your device forum and ask there on upgrading section if not wait on the line till the operator answers here...
Boot Problem
Hi !
I have HTC p3400 and i read the commetns of the people who upgraded the windows to 6.1. i also decided to u upgrade. i follw the procedure given by Xda developers. i just follow the fisrt step, there was a caution by the developers that dont try it on the new pocket pc having model no HT8 but i did'nt notice....after first step my pocket pc turned off and after that i don't start....even on connecting charger or usb cable it dont take any action. some body told me that is is booting problem.....i am so much tensed and i don't know what to Do, any body can please help me? i shall be very thankful to You.
Thanks in Advance!
--removed email address--my id....
thanks, regard AB khan
Welcome to forums
Have a deep read here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Gene
Hope it helps.
Good luck,
p.s If you dont want to have your mail with a lot of spam, better remove your e-mail
Related
I recently had my i imate ppc repaired, as it wouldnt charge. Since then i havent been able to use the usb connection, I some how wiped out my wm 2003 rom and have been trying to reinstall it but cant seem to get any futher than the error 101 connection, I have sent the phone back to the repairer and he has said that its a sofware problem, at the moment there is no software on it, I only have the bootloader screen which says, Serial, or USB when the usb cable is connected.
Can anyone out there please let me know if there is anyway i can get the room back on this or ist it a brick.
if the boot loader screen says usb when plugged in, then you CAN flash a ROM, check the forum for whichever your device is
help how do i flash Imate PPC phone edition
Can anyone tell me how to flash an 8imate pocket pc phone edtion, or paste the link to the forum where the information is on here please.
Cheers
Sam
http://www.xda-developers.com/
http://wiki.xda-developers.com/
http://forum.xda-developers.com/
click the first, then click either of the second two, find which your phone looks like and read
Thanks
Thanks for taking the time to help me, will check them out.
Cheers
Sam
ok call me dumb
I have read the information and now im more confused than when i started.
how do i flash this thing. what program do i need to do it. I have found out that it is a Himalaya link http://wiki.xda-developers.com/index.php?pagename=Himalaya.
thanks
Sam
OK, i don't have a Himalaya or a 2003 device, but,
download the original ROM from whoever sold you the phone, flash that to get back to a working phone. no programme required, just dl and run it, then read everything in
http://forum.xda-developers.com/forumdisplay.php?f=243
don't do anything until you fully understand what you are doing and why
good luck
PS, please don't post multiple requests asking the same questions which are almost certainly already asked and answered in this forum,
you'll only aggravate others who can see that you're new & you've still not read enough if you're asking the question, so you're less likely to get a reply.
remember this isn't a help service from your phone company, this is other people who all started the same way you did
please while using shelltool. to upgrade wm5 to wm6 but ive just got an error message and suddenly lost my connection from activesync! please i dont know how to retrieve my phone! now after bootscreen... white screen appears and nothing happens! i tried hard reset it. nothing happens! please help!
i wish someone here could help me! please! im crying like a baby here! cant sleep! waiting for answers!
prinsipe21 said:
please while using shelltool. to upgrade wm5 to wm6 but ive just got an error message and suddenly lost my connection from activesync! please i dont know how to retrieve my phone! now after bootscreen... white screen appears and nothing happens! i tried hard reset it. nothing happens! please help!
i wish someone here could help me! please! im crying like a baby here! cant sleep! waiting for answers!
Click to expand...
Click to collapse
can you get it into bootloader (the coloured bars) ???
yes
yes sir i can!
prinsipe21 said:
yes sir i can!
Click to expand...
Click to collapse
Don't call me sir, mabe I'm younger than you
Well, then you are not the notsohappy owner of a brick
Get it into bootloader and flash your carrier's official rom
Also, see that in WM6 you must use only ActiveSync 4.5 or higher
Ask if you need help, I will be here for couple of hours and there are others who know way more than me and also can help
ill try it sir!
currently downloading .exe from htc site. dude is that an installer? do i need to flash it using other programs or not? thanks!
oh btw! i just used activesync 4.2 i am also want to upgrade my cingular 8125 to wm6 xplore1.1.. just like yours.. what steps i shall do? can u help me?
Read the wiki on how to unbrick your phone
NOTE: And don't double post
sorry sir, i just dont know what to do
anyone please help me
Get the rgb boot loader screen on by holding down camera while you reset. Then connect via usb to the pc. You will see the word " usb " appear on the bottom of the screen on your phone.
Run the exe you downloaded from your manufacturer / carriers website and it will install the stock rom.
Phone will reboot when finished.
Hey presto.
Dont panic son
Rather than just randomly flashing stuff, you need to read. Specifically:
http://forum.xda-developers.com/showthread.php?t=298613
It will step you through things and point you to the right posts to get you going. DON'T SKIP STEPS! DO Everything and check everything...
Good luck (and quit throwing "sir" around Way too formal)...
I agree
mfrazzz said:
Rather than just randomly flashing stuff, you need to read. Specifically:
http://forum.xda-developers.com/showthread.php?t=298613
It will step you through things and point you to the right posts to get you going. DON'T SKIP STEPS! DO Everything and check everything...
Good luck (and quit throwing "sir" around Way too formal)...
Click to expand...
Click to collapse
I agree what he said lol
anichillus said:
Don't call me sir, mabe I'm younger than you
Can we call you His Guru-ness instead?
Ask if you need help, I will be here for couple of hours and there are others who know way more than me and also can help
Perhaps, but you are certainly at the top end of the food chain here.
Click to expand...
Click to collapse
Anichillus--->You're funny, I edited it to be more true, less humble.
To the OP...don't panic, your wizard is not truly dead until the usb falls out and smoke comes trough all the cracks. Please do yourself a favor...READ READ READ READ READ...
READ THE WIKI, READ THE STICKIES...GET TO KNOW YOUR DEVICE COMPLETELY FIRST.
Anything you attempt, is done at your own risk...knowledge is power...understand your Wiz, be one with your Wiz.
i konw that this is not a Universal forum but, can anyone help me? i got an error 112 Update Error, and i cant just flash anything, just stucks at 7% help please
More detail please...
Isaygarcia said:
i konw that this is not a Universal forum but, can anyone help me? i got an error 112 Update Error, and i cant just flash anything, just stucks at 7% help please
Click to expand...
Click to collapse
Are you at your Tri-Color Screen? If so...tell me what the screen says...also what device do you have a Tilt or a TyTN II
well when i was trying to flash the rom it not recognized it, then i disconected it and then enter in bootloader, and when it was flashing just stucked at 7% and said "ERROR 112 :CE Rom Update Error"
and now i cant flash anything, just stucks at the same 7%
its a Universal i know that it isnt a forum for that device but in the universal one just nobody answers =( and i guess that some people here has 1 uni too
Theres a way to Flash the rom via SD card on the universa?? please help TT-TT
Isaygarcia said:
Theres a way to Flash the rom via SD card on the universa?? please help TT-TT
Click to expand...
Click to collapse
What does your TRI-COLOR Screen say?
it says just usb and v1.0
it tries to flash and then stucks at 7%
new thing, when i try to flash an original rom, it says "error 100: model id error 22-N-50-N-N
please help!!
Can anyone help me please?? =(... i get an error 112, the rom just dont flash, it gets a 7% then the error appears, its an HTC Universal. i tried some things and even no results, theres a way to flash from SD? or it will be the same?? or maybe it got locked or something? or i just bricked it?? it enters to bootloader and it starts to flash and stuck on 7% TT-TT
Did you try a google search? I found this related to error 112...
Thanx, trying possible Fix!!
aahh it doesnt work... please can anyone help more??
tried to install the original stock rom and just wont work.. when the update reaches the CE update just stuck at 7% what can i do???
can i get some help? please =(
i searched on google, and i found that a some peolpe had this problem too, but, the same as me, nobody answers. its time to throw away my universal?
Not to sound mean, but you could try spamming the Universal forums instead of the Kaiser forums. I know there are a lot of people on the Kaiser forums, but we're Kaiser users. Odds are you'll get better information in the correct forums because the people there have the same hardware...just a thought.
close this thread plz
OK,
I have a Universal, and here are some ideas and questions:
1. Give the exact name of the ROM you are trying to use. Do not put "the original one," or "Fred's rom." Put the EXACT NAME of the ROM that you are upgrading to, and a link to it.
2. Stop. Take a breath. Throwing away your Universal will not solve the problem.
3. Give exact step by step description of what happened. Start from, "I was using my Universal with XXXXXXX ROM and the world was fine, and then I downloaded the ROM given in item #1 above. I then did (whatever you did). Continue on. End with "I am now stuch at 7%"
4. I noticed that you are from Mexico. I am from the USA, so some colloquilisms may not translate well. (Plus my Spanish is horrible). Let's just stick to the facts.
To be quite honest, your posts are not helpful, and they sound like a drowning man clutching an anvil (see last Sunday's Dilbert...). It would be more helpful if you could be more forthright and specific as to the issue, and give those wanting to help you as much detail as possible.
I am willing to help, but help me help you.
hi everyone,my problem is that after uprading my pm300 it stuck into bootloader any idea on how to solve this problem and is g4 i realy need your help urgently thx in advance
What ROM did you upgrade to? If it was to a WM6 ROM using the "new" upgrade method, you may have failed to hard SPL your device. What ever the cause, the solution (as ever) can be found on the wiki.
yes you are right i didnt HARDSPL my device befor updating with (ROM
MY GREEN EDITION WM6.1)is there any hope that my phone will come back to live,by the way thx for the reply
If the device can get into bootloader, it should be possible to recover it In my previous post there was a link to the wiki page for recovering devices from bootloader. If you want any more info, I'll be happy to try and help...
thx for the quick reply but my problem now is if i connect the phone i can see the usb on the screen alright but the computer doesnt sync it and if i go ahead and update the rom i get error make sure the usb/cradle is connected properly i dont know what to do plssssssssss i need help to revive this phone thx in advance
thx mr 13v5y for your help my is alive and working like never before thx to you once again i rely appreciate the help you gave me more greep to shoulders ve a nice day
No problem! If you ever have any issues, take a look at the wiki first though
I double posted! I blame Linux!
Hi, I am new here.this forum is very usefull in windows mobile..
I have tried one of the software posted here.. Kaiserunlocker... which is processed in 123 steps accordingly...
I had done step 1 the phone is ok
in step 2 the phone goes dark with verious colours grany screen
I dont understand how to revive from this problem.. please give some Idea..
I would be appricated.
tanks.
My HTC phone Model is -KAIS100 (AT&T)
aliarjun said:
Hi, I am new here.this forum is very usefull in windows mobile..
I have tried one of the software posted here.. Kaiserunlocker... which is processed in 123 steps accordingly...
I had done step 1 the phone is ok
in step 2 the phone goes dark with verious colours grany screen
I dont understand how to revive from this problem.. please give some Idea..
I would be appricated.
tanks.
My HTC phone Model is -KAIS100 (AT&T)
Click to expand...
Click to collapse
Can you soft reset? Can you hard reset? You need to read a lot more that what you have read. This site ( Kaiser ) has the best help thread on XDA... Olipof has one in all unlocker that you should have used.
I just tried that tool a few days ago,had the same problem while flashing the kaiser of a friend...
to get it to work I did the following:
I manually installed the 3.29Hard2 SPL from cmonex using jump spl,
then used the tool you use for the sim unlock.
I think that the problem is that that tool doesn't connect via usb when it reaches the bootloader.
thanks for the kind concerns,
But one thing I dont understand, the set is in grany screen... (startup is ok but it goes to grany screen {blank} while main windows appears)
Please tell me how to put jump spl. manually?
also hard reset is not processing. how to do it?
aliarjun said:
thanks for the kind concerns,
But one thing I dont understand, the set is in grany screen... (startup is ok but it goes to grany screen {blank} while main windows appears)
Please tell me how to put jump spl. manually?
also hard reset is not processing. how to do it?
Click to expand...
Click to collapse
rtfw
You need to read son, read like you have never read before. Then when you think you understand it your almost there. I have been reading for years and have yet to make my first rom guess it really comes down to time. Well the answers are there and yes you sometimes have to dig. But there is this handy search button at the top of the page third from the right if my memory is clear. And it now uses the google search engine to search this forum a function not here years ago. So your tools are there use them wisely young grass hopper and try not to post until you have read for some days. And please dont open another thread if you have a question such as how do i jump spl you should find the appropriate thread to post in.
thanks
nate
Duplicate thread.
Thread Closed
EDIT: Answer in this thread :http://forum.xda-developers.com/showthread.php?t=433835
Ta
Dave