Hello,
I am a newbie here and I really enjoy the forums. I have a couple of questions. I am having trouble getting the net framework to download on my computer properly and I dont know how to get the actual program on my diamond. I am also having problems with playing some of the games like Xtrackt and the beer simulator and shoot me. It claims I need the newer net framework. I ALSO cannot run TF3D config on the device for some reason.
-Any takers?
Hey there,
there are two ways of installing .net. I don't know which version you are looking for, but it should be the same for all versions.
You can either do it through active sync/mobile device center, therefore you connect your phone, set up the connection with active sync/mobile device center and then run the setup of .net.
You can find a .cab file via google, download it directly to your phone or transfer it from your computer via usb to the phone and just run it there to install.
Dennis
Ok, thanks! 99% of my applications are working now. However, I am still having a problem with Xtract running. Everytime I try to run it, it does not work and keeps coming up with pop-up messages and sometimes just end up soft reseting the diamond. Please help
Related
Hi I am having a problem accessing my pc from my pocket pc XDA 2i. I can access fine from a "normal" pc with no problems. From the XDA I can log in, then pick the remote pc from the my computers list, then enter my password and username, but the next page which would normally be the desk top, is a page showing the logmein free logo the name of the remote pc, a copyright notice, and an option to end the remote session. I cannot get any further than that !............hope you can help...........Thank you.
P.S. I am running NetFront 3.3 browser
600bhp said:
P.S. I am running NetFront 3.3 browser
Click to expand...
Click to collapse
Try it from Pocket Internet Explorer.
Hi, I have tried it with Internet Explorer, and I get the same result
I have e-mailed LogMeIn support 7 days ago but still no answer
I've tried as well on my treo 750 and am having the same problem. I thought I read somewhere that the current version of logmein is not compatible with WM5. It works great between my computer at work and home though.
jc240 said:
I've tried as well on my treo 750 and am having the same problem. I thought I read somewhere that the current version of logmein is not compatible with WM5. It works great between my computer at work and home though.
Click to expand...
Click to collapse
It's comptible with WM5 as is also pointed out in the Remote Desktop Access Bible ( http://forum.xda-developers.com/showthread.php?t=288506 ).
I've tried everything and cannot seem to get logmein to work. I log in to the website and then enter the login and password for my desktop computer and all I get is a screen showing the version of window I am using along with some memory usage bars. I can restart or my computer remotely, but that is all I seem to be allowed to do. As I mentioned before I don't have any problems accessing my computer from other desktop computers. One thing I have found is Z2 remote access. It's a bit slow, but works pretty well. The only thing is that it is not free, but it is only a one time fee for the software.
I'm thinking that this might me a browser issue. At least for me. If I use minimo I can at least get to the page that says remote control and end remote session. However when i click on it ends up going to a blank screen with nothing there. Can anyone who has this working tell me what their registry setting are for PIE, as far as showing it to be a PPC app rather than IE5. I think that I've modified it a few time and don't know what the default settings ar.
Hi There is no line saying "Remote Control" unfortunatley
Hi I tried modifying the settings, now its gone very strange, when I select my computer I know get connected to Remotely Anywhere, then a page showing text saying Windows XP, cpu load (No percent shown), Memory load ( no persent shown), Main menu, Reboot, end remote session. But I dont have a remotely anywhere account....very weird
Hey 600bhp. You might want to check on the logmein.com forums. There are two threads. One is titled " Problems accessing via pocket pc" and the other is " Why is Pocket PC no longer supported?" It would seem that logmein does not support ppc's for some reason if you downloaded it after 02/20. logmein is aware of the problem and apparently working on it.
LogMeIn Cab File for Pocket PC
I have been having a lot of the same issues. I have a PRO account so I called technical support. They sent me the following file. I've been connecting like a champ ever since. I use the bleeding edge beta version on my PC. This file also works with the regular version.
mikechannon said:
Yep that's the cab mine downloaded yesterday - unless it's been modified?
Anyway if it's the same then I agree works perfectly.
Mike
Click to expand...
Click to collapse
I don't know if it is the same or not. It might be. I just know it works
Are you TREO 750 owners still having issues? I'd like to know as I was
thinking of trying the 750 but need LMI for sure!
I know one this for sure the OPERA browser on PPC (WM5) will just go in loops, so LMI is the only thing I use IE for on my WM5 device(s).
Having have said that if the IE is somehow custom on the Treo 750? Could that be it??
logmein access issue
I'm using my HTC p3600 and trying to download the remote access client sw no chance to obtain it, dwl stopped.
can I download your "ractrice.cab" file and install it directly into mobile device?
I'm experiencing a problem doing it ( unsuccesful installation ) ...
please help me
Thanks
why doesnt this work?
ecsk2 said:
Are you TREO 750 owners still having issues? I'd like to know as I was
thinking of trying the 750 but need LMI for sure!
I know one this for sure the OPERA browser on PPC (WM5) will just go in loops, so LMI is the only thing I use IE for on my WM5 device(s).
Having have said that if the IE is somehow custom on the Treo 750? Could that be it??
Click to expand...
Click to collapse
I have a Treo 750 with the official ATT WM6 rom. I cant get logme in to work either. Here's what happens.
1) I visit http://logmein.com via pocket IE
2) I get redirected to http://secure.logmein.com/pda
3) I log in with my email address and password
4) I'm presented with "My Computers" and I click on a hyper link of one.
5) I'm asked to download RACtrlCE.cab
6) I save and install to main memory
7) I click the continue link on IE
8) I'm asked to log in again
9) I'm presented with "My Computers" again
10) I pick one, I'm asked to log in again!!!
11) I see "My Computers" again (endless loop)
What's wrong??
Gotomypc worked great when I used to have a free account through my work. Why doesnt logmein work on my pda?
update
I uninsatlled the RACtrlCE.cab via remove programs
I installed the ractrlce.cab from page two of this thread
I tested logmein.com on my treo. When it asked to download and insatll RACtrlCE.cab I clicked cancel to force it to use the other package. (no luck) Ok so I let it upgrade. It uninstalled ractrlce and installed the one directly from logmein once again.
It seems I can get further now for some reason but I'm still not connecting. Here's what I see now. I get redirected to the following url and the page has the following info:
http://asterisk.app53.logmein.com
_________________
Windows Authentication
User name:
Password:
__________________
ok so I log in with my WINDOWS username (not logmein email) and it goes to the next page............
__________________
Windows IVsta Ultimate 6.0 Service Pack 1, v668
CPU Load %
Memory Load %
Main menu
Reboot
End Remote Session
_________________
The bottom three items are hyperlinks. Clicking on Main menu brings up the same screen. WTF is this junk? This doesnt make much sense something is not right obviously still. Anyone else see this? Suggestions?
has anyone got this working for wm5 in the last week or so, i lost access following phone crash and now keep getting prompted that in need a 2003 compatable phone and loop through the cab download constantly
proxy
I had a similar problem with my 8525 (official ATT rom WM6) and running Disable the proxy everytime before i use Logmein works.
Hope this helps
Somebody must have been in a simular situation to this: My main computer went to the land of fried cpu's and until money and time permit I am stuck running Win98 on an old laptop (a good exercise in humility )..
So my question is, how do you get a wm6 PDA (running the blackdiamond rom myself) to "talk to the pc"? Win98 will only run Activesync up to 3.8, and thus when I connect from Wm6 I get an "upgrade Activesync on your destktop message". This is not an option. Was wondering if I could install Activesync 3.8 on the PDA, but can't find any cabs or so anywhere... Tried finding third party software (Soti, etc) but none will run on win98.
Maybe a stupid question, but after hours and hours searching the forums and googling about I still haven't found an answer... Oh, and I'm not even interested in "syncing" mainly just transfering files.
Any tips would be greatly appreciated!
If you just need to move files back and forth, you should be able to do that over infrared, that doesn't require Activesync. Even an older laptop should have an IR port.
Hmm- looks closely at computer- indeed it does! Never used IR for anything so I didn't think of that Will give it a try! Thnx!
sooo, because i'm a cheap basta*d i'm going to buy a dvd player with gps for my car on ebay and i've noticed a lot of them, or even all of them?, run on windows ce. So here's my question, will any cab run on windows ce? i mean, winmo 5, 6, 6.1 and everything before that ran on windows ce right? so how easy would it be?
Picture this, a 8-16gb sd card, jam it into the card reader and start up S2P (slide to play) for one bad ass cover flowin' music center! obviously other thing would be useful to, and since these bad boys are only like $300 buckaroos it isn't a bad idea, especially for us gadget pr0n guys right?
what about flashing a rom from a SD card (only heard rumors/speculation about that, probably not possible)? or just loading up manila 2d/3d via throttle launcher and getting the think looking pimp? no phone antenna, no problem, just sync it through the bluetooth and make calls (new app required i'm guessing, or at least adapt/beautify some existing cab/exe). get internet sharing to work on it somehow and you're seriously looking at a pretty cool carputer. well, with all i'd want to use one for anyways. Who wants to do more than what a good rom on one of our phones can do while in a car anyways?
I'm not sure if it will run out of the box like that, with nothing more than some cabs on and sd card, or if you have to do something else (file explorer and whatnot), but i figured xda would be the best place to start for the right answers. I've never gone wrong before with you guys, so speak up! let's see what we come up with!
or at least give me a link to a better place if you know of one and i'll get off my soapbox...
anyways, i've got access to a few vogues, a wing/herald, and a touch pro to do testing with, along with the dvd player/win CE unit--in about a week or two that is--so i'm more than happy to put it on the table.
Man i hope you guys are reading this and as pumped as i am.
anyways, pm me with anything, or i'll just keep looking to see if anyone else posts here
amruthwo
bump
does anyone know if this would even work?
This could work.
First of all, you need to look up how to disable OEM's shell (factory "software" of the player) and enable Windows CE interface.
Next you either install Handheld PC apps, or install libraries which allow you to run applications from PocketPC.
Myself I tried it with a cheap GPS. Yeah, WinCE + apps are a major step up from maps only, but it is not anywhere close to even a non-phone PPC. Because of, for example, lack of WiFi. The big advantage is, that I can install any WinCE compatible map instead of outdated OEM maps.
Hope I am right, and this helps
Where did you find information about your GPS? I just got one, model# TID-7626GPS that I'm going to try to mod, but i can't find information about how to get the WinCE.
if you could pass on any links to places i could look it would help a ton. For how do disable the factory OEM and those libraries?
First you need to find out real manufacturer of your device. I googled model name you said but there's nothing
Or, connect that device via ActiveSync (yes, the same) and see if there's a file \Windows\autorun.inf
If it exists, backup it. Then change it so it will load \Windows\explorer.exe
That should unlock WinCE UI.
However, the file may not exist. In this case you have to look for instructions over the web.
I'm very sad and I'm hoping someone can help me with ANY idea that might work. I just bought a LifeView FlyPresenter CF card for my pda because I heard awesome things about it. Unfortunately any and all attempts to install the card so far have been unsuccessful with any driver version I could find. Plugging the card in hangs the pda until I remove it and soft-resetting with the card in hangs the boot process...when I remove it the thing boots normally and then gives me an error box saying it can't recognize the card (which I pulled out) and is looking for me to tell it what driver to use. I tried typing the driver name in the box but that did nothing, probably because I can't get the error box and have the card plugged in simultaneously. The Card is supposedly written for PPC 2002 and 2003 and I figured that it'd be compatible with WM6 but maybe I was mistaken....the software seemed to install normally and the app shows up on the programs list though.
So....I'm hoping somebody can help me either A) get the thing working or B) tell me how to trick the device into acting like a ppc 2003 or something crazy like that so that I can use the card in some limited way. It has a lot of awesome software and full motion video out that I want to take advantage of. Thank you for your kind support.
IPAQ 210 Enterprise
WM6 Classic (non cooked)
81 MB free RAM
39 MB free space on the device
Anybody? I'm totally helpless at this point...
hi there, the drivers are imcompatible i have a Lifview cam, its a noshow on my 6.1 custom, you need 2003/se for it to work.
Sorry
Badwolve1
Aww ****..... Is there anyway to emulate the OS on a wm6 device? I don't care how complicated or weird it is....any means of running the hardware would be better than having to sell this thing after I just bought it.
gahhhrrrlic said:
Aww ****..... Is there anyway to emulate the OS on a wm6 device? I don't care how complicated or weird it is....any means of running the hardware would be better than having to sell this thing after I just bought it.
Click to expand...
Click to collapse
Sorry, i don't thinks its possible.
Hey have you seen on their website that they have SDK software? I just saw it now. Apparently it allows you to write drivers for whatever platform you want by simply using their dll files and writing the drivers for them. Problem is the link is 404 and I can't find the sdk anywhere else. I know they have the same software for the flycam too. Maybe if we each are able to find our respective versions of the SDK we can both use our hardware again.
Any ideas where I could find the SDK? My methods of searching for things are limited to google but you might know where else such things are likely to be found...
Badwolve1 said:
hi there, the drivers are imcompatible i have a Lifview cam, its a noshow on my 6.1 custom, you need 2003/se for it to work.
Sorry
Badwolve1
Click to expand...
Click to collapse
Try this Software: http://www.wincesoft.de/html/cecam.html It may work for you.
Hi, so I just got an HTC Fuze. I'm usually pretty tech savvy but apparently not with this. I can't get my phone synced with my computer so I got an SD card reader to transfer files. However I've got no idea how to install half of the apps I've downloaded. The single .cab files I understand. Just copy them over and run them on the phone. Even the .exe I got a .cab converter for but most of them come zipped with at least like 10 or way more files with one of the XML document setup things. Could someone please tell me what I do with these? The file types are always numbers and I just don't get it.
Also, if someone might be able to let me know why my computer won't recognize my phone that would be greatly helpful. It's a 32 bit Vista. I've got Windows Mobile Device Center on but the computer calls my phone an unknown device. I feel like I've tried a hundred different things but it just won't work. My phone is running TAEL ROM does this have anything to do with it?
Thank you!