Problems accessing logMeIn via pocket pc - General Topics

Hi I am having a problem accessing my pc from my pocket pc XDA 2i. I can access fine from a "normal" pc with no problems. From the XDA I can log in, then pick the remote pc from the my computers list, then enter my password and username, but the next page which would normally be the desk top, is a page showing the logmein free logo the name of the remote pc, a copyright notice, and an option to end the remote session. I cannot get any further than that !............hope you can help...........Thank you.
P.S. I am running NetFront 3.3 browser

600bhp said:
P.S. I am running NetFront 3.3 browser
Click to expand...
Click to collapse
Try it from Pocket Internet Explorer.

Hi, I have tried it with Internet Explorer, and I get the same result

I have e-mailed LogMeIn support 7 days ago but still no answer

I've tried as well on my treo 750 and am having the same problem. I thought I read somewhere that the current version of logmein is not compatible with WM5. It works great between my computer at work and home though.

jc240 said:
I've tried as well on my treo 750 and am having the same problem. I thought I read somewhere that the current version of logmein is not compatible with WM5. It works great between my computer at work and home though.
Click to expand...
Click to collapse
It's comptible with WM5 as is also pointed out in the Remote Desktop Access Bible ( http://forum.xda-developers.com/showthread.php?t=288506 ).

I've tried everything and cannot seem to get logmein to work. I log in to the website and then enter the login and password for my desktop computer and all I get is a screen showing the version of window I am using along with some memory usage bars. I can restart or my computer remotely, but that is all I seem to be allowed to do. As I mentioned before I don't have any problems accessing my computer from other desktop computers. One thing I have found is Z2 remote access. It's a bit slow, but works pretty well. The only thing is that it is not free, but it is only a one time fee for the software.

I'm thinking that this might me a browser issue. At least for me. If I use minimo I can at least get to the page that says remote control and end remote session. However when i click on it ends up going to a blank screen with nothing there. Can anyone who has this working tell me what their registry setting are for PIE, as far as showing it to be a PPC app rather than IE5. I think that I've modified it a few time and don't know what the default settings ar.

Hi There is no line saying "Remote Control" unfortunatley

Hi I tried modifying the settings, now its gone very strange, when I select my computer I know get connected to Remotely Anywhere, then a page showing text saying Windows XP, cpu load (No percent shown), Memory load ( no persent shown), Main menu, Reboot, end remote session. But I dont have a remotely anywhere account....very weird

Hey 600bhp. You might want to check on the logmein.com forums. There are two threads. One is titled " Problems accessing via pocket pc" and the other is " Why is Pocket PC no longer supported?" It would seem that logmein does not support ppc's for some reason if you downloaded it after 02/20. logmein is aware of the problem and apparently working on it.

LogMeIn Cab File for Pocket PC
I have been having a lot of the same issues. I have a PRO account so I called technical support. They sent me the following file. I've been connecting like a champ ever since. I use the bleeding edge beta version on my PC. This file also works with the regular version.

mikechannon said:
Yep that's the cab mine downloaded yesterday - unless it's been modified?
Anyway if it's the same then I agree works perfectly.
Mike
Click to expand...
Click to collapse
I don't know if it is the same or not. It might be. I just know it works

Are you TREO 750 owners still having issues? I'd like to know as I was
thinking of trying the 750 but need LMI for sure!
I know one this for sure the OPERA browser on PPC (WM5) will just go in loops, so LMI is the only thing I use IE for on my WM5 device(s).
Having have said that if the IE is somehow custom on the Treo 750? Could that be it??

logmein access issue
I'm using my HTC p3600 and trying to download the remote access client sw no chance to obtain it, dwl stopped.
can I download your "ractrice.cab" file and install it directly into mobile device?
I'm experiencing a problem doing it ( unsuccesful installation ) ...
please help me
Thanks

why doesnt this work?
ecsk2 said:
Are you TREO 750 owners still having issues? I'd like to know as I was
thinking of trying the 750 but need LMI for sure!
I know one this for sure the OPERA browser on PPC (WM5) will just go in loops, so LMI is the only thing I use IE for on my WM5 device(s).
Having have said that if the IE is somehow custom on the Treo 750? Could that be it??
Click to expand...
Click to collapse
I have a Treo 750 with the official ATT WM6 rom. I cant get logme in to work either. Here's what happens.
1) I visit http://logmein.com via pocket IE
2) I get redirected to http://secure.logmein.com/pda
3) I log in with my email address and password
4) I'm presented with "My Computers" and I click on a hyper link of one.
5) I'm asked to download RACtrlCE.cab
6) I save and install to main memory
7) I click the continue link on IE
8) I'm asked to log in again
9) I'm presented with "My Computers" again
10) I pick one, I'm asked to log in again!!!
11) I see "My Computers" again (endless loop)
What's wrong??
Gotomypc worked great when I used to have a free account through my work. Why doesnt logmein work on my pda?

update
I uninsatlled the RACtrlCE.cab via remove programs
I installed the ractrlce.cab from page two of this thread
I tested logmein.com on my treo. When it asked to download and insatll RACtrlCE.cab I clicked cancel to force it to use the other package. (no luck) Ok so I let it upgrade. It uninstalled ractrlce and installed the one directly from logmein once again.
It seems I can get further now for some reason but I'm still not connecting. Here's what I see now. I get redirected to the following url and the page has the following info:
http://asterisk.app53.logmein.com
_________________
Windows Authentication
User name:
Password:
__________________
ok so I log in with my WINDOWS username (not logmein email) and it goes to the next page............
__________________
Windows IVsta Ultimate 6.0 Service Pack 1, v668
CPU Load %
Memory Load %
Main menu
Reboot
End Remote Session
_________________
The bottom three items are hyperlinks. Clicking on Main menu brings up the same screen. WTF is this junk? This doesnt make much sense something is not right obviously still. Anyone else see this? Suggestions?

has anyone got this working for wm5 in the last week or so, i lost access following phone crash and now keep getting prompted that in need a 2003 compatable phone and loop through the cab download constantly

proxy
I had a similar problem with my 8525 (official ATT rom WM6) and running Disable the proxy everytime before i use Logmein works.
Hope this helps

Related

installing a certificate on WM6

I m using this http://forum.xda-developers.com/showthread.php?t=312519 version of Windows Mobile. On my work we use a certificate named 1178798849.p12
This certificate is to make use of some online services that a company offers us. On the desktop pcs on our work we had no problems to install it.
We put this file on my Universal. When double clikking this certificate he asked for a password. This password came with an sealed envelope of the company. We entered the passcode and the certificate installed correctly. When going to settings, system, certificates on WM6 now, your can see the certificate at both the tab PERSONAL and ROOT.
When going to IE of the universal we went to the correct site called https://websam.sng.nl. There he asked what certificate to use so we clicked on our installed cert. but when the universal than tries to connect to https://websam.sng.nl/voa_sng/index.htm we get a blank screen. What I can see is that the locker on the upper left side of the page goes to LOCKED. I ve already looked in the options menu of IE and turned of the warings, this didn t help. Also, when truying another attempt after the first one we get this:
The page cannot be displayed because the Web site cannot be authenticated.
or sometimes:
The page you are looking for cannot be found due to unknown error 0x80072f78.
Any ideas anyone how to solve this and make the certificate/website work?
Thanks for all help!
If you can safe your certificate in DER-encodeing as PKCS#12 with the file-ending .p7b just click on it to install.
This at least worked with the CACert-class3 and 1 -certificates for me.
(never got that to work in wm5)

Wifi between Polaris and OS X?

Hello,
is there a possibility to exchange some files between my Orbit 2 and my Macbook (OS X 10.4)? I tried to use a computer-to-computer network but couldn't get it working. So can anyone help me please? Unfortunately I'm new to Apple and Windows Mobile. So please be very precise when you describe what I have to do (think about a DAU² ).
Ah yes: I don't want to synchronise anything (like adresses or so), just wanna exchange some music/videoclips via wifi (hope this is faster than bluetooth where I only get ~100kb/s). Thank you very much!
Hi, I have just started to use SyncMate which is free to sync my iTunes music library on my Mac with my TyTN II. It works really well but I have been using a USB rather than WiFi connection. The program does support WiFi though.
You can download the software from
http://blog.eltima.com/2008/01/sync-your-mac-and-a-smartphone-with-syncmate.html
Although this is sync software it should also be able to do what you want as you can Sync a folder on your Mac with a folder on your phone which will enable you to transfer files to and fro.
Good luck and be interested to hear if the WiFi sync works!
if boths were connected to the wifi router it would be a matter of setting up normal filesharing like between 2 computers
if otherwise one would have to do it as adhoc network
but i dont know how these things are handled on macs
on pc's it the pc sharing would have to be running the server service
and have the pda as a user with reading and writing rights
And BT ? or MissingSync
I have an old iMac and I made some ringtones. I sent them by BT with no problem. I dropped Syncmate cause I got some issues with the calendars and the contacts. MissingSync is perfect but not free. You can install whatever but you need a cable. Will try to check the WiFi
Yes, with bluetooth I managed to send some files. But speed was not that fantastic (~100kb/s). So I'll try to get it working with Wifi. Maybe speed there is better. I got my device recognized by the Macbook and an IP was sent to my phone but I don't know how to access to files. Unfortunately I have no time for the next two weeks to test it any further. Please post your efforts if you have success. Thanks!
So, I already got what I want (even better). I found the freeware MochaSoft FTP-Server. This software has to be installed on your PDA. It youses the FTP-Protokoll. Therefore it lets your PDA act as an FTP-Server. All you need then is an Internet Browser, which has an FTP-Client (for example Internet Explorer or you use the fireftp-extension for Firefox). Now you can access your PDA and exchange files via Wifi. Speed is much better than Bluetooth (~700kb/s read and 680kb/s write). The good thing is, that you aren't limited to the platform anymore. (I don't know if the standard Linux browser has an ftp-client, but my beloved Firefox has a Linux-Version too.)
P.S. @linux-users: Please don't kill me for my last sentence. I believe that linux is able to handle these things out of the box. It's more for us windows users to know that it's possible.

Synchronize WM6.1 device with Lotus Notes

How to synchronize WM6.1 device with Lotus notes?
I tried Laplink PDAsync 4.1.1033 and XTNDConnect PC 6.5.9033 but I always get message:
Synchronization Failed: 17.11.2008 22:05:41
Error 1004: Unable to connect to device. Verify that ActiveSync is running.
Both programs worked with WM6.0.
Any solution?
I am using the IBM Lotus EasySync Pro which is working finw with my HTC Touch and WM 6.1 . I have tried a few different firmware versions w/o problems. Dow this is not a freeware application.
well I use Laplink with a 6.1 flashed i780, so thats not the problem.
do you have the laplink cab installed on the device?
can you access the device by means of active sync?
@Eriksm
Which version of IBM Lotus EasySync Pro do you use?
@bommel0815
I have laplink cab installed on the device, and I can sync with Outlook 2007 w/o problem. Which version of Laplink do you use?
"unable to connect to device"
I have same problem,
with my Diamond EasySync works perfectly but with Touch HD just "unable to connect to device".
I found somethink with security model for PDA devices I tried to set "security off" with "Security Configuration Manager" but still nothing, it doesnt want to work ....
I somebody can help ...
Do you have "Enable advanced network functionality" turned off? You can found this at settings\connections\USB to PC
I have turned off faster data synchronization and nothing again ...
jreber2 said:
@Eriksm
Which version of IBM Lotus EasySync Pro do you use?
@bommel0815
I have laplink cab installed on the device, and I can sync with Outlook 2007 w/o problem. Which version of Laplink do you use?
Click to expand...
Click to collapse
PDA Sync 4 and Notes 6.5
it even works nicely with my new Xperia.
have you installed the CAB file on the device? the Sync Software.WM5.CAB?
you can find it in the laplink installation directory and you need this to sync.
There is no more problems with XTNDConnect v7.0. Thanks for your help anyway.
\\windows\101\xcpcsyncsvr.exe : error 2
I tried XTNDConnect V7.0, however when I first run it and it attempts to instal to the device (must be the device and not storage card) it chucks up the error "\\windows\101\xcpcsyncsvr.exe : error 2" that it can't see the .exe. I have checked in the win 101 folder and the file is there; there is also a file XcpcApiMgr.dll.
I checked on the Sybase WS http://www.sybase.com/detail?id=1054315 and point 6. advises that
"This issue is being reported with certain models of HTC-built Windows Mobile 5.0/6.0 Smartphones. It is caused by a certain type of security these devices have, which prevents the XTNDConnect PC CAB file from being installed properly on the device."
and instructs to download a security manager.zip from their FTP (this is a broken link and I have had no reply from them as yet).
and if this does not work to
"If you are still unable to install the XCPC CAB file onto your Windows Mobile 5.0/6.0 Smartphone it may be necessary to follow the manual unlock instructions from the link below."
I also checked in the reg as they advise but the security setting "tier 1" on the device is already as they specify.
Can any one help me please?
Cheers, Tom (1st post) Notes 7.0, Touch HD ROM 1.14.405.3 (22273) WWE
I'm using mNotes from Commontime. Tried a few other apps but like mNotes the best. Does over the air sync and never have to worry about connecting my phone. A little pricey at regular price, but not bad when it goes on sale.
WM6.1 and PDAsync 4 - missing CAB
I have Laplink's pdasync 4 trial installed, but don't seem to have the CAB file on my htc diamond. Any advise how to get it is much appreciated!
Common Time mNotes
prapsik said:
I have same problem,
with my Diamond EasySync works perfectly but with Touch HD just "unable to connect to device".
I found somethink with security model for PDA devices I tried to set "security off" with "Security Configuration Manager" but still nothing, it doesnt want to work ....
I somebody can help ...
Click to expand...
Click to collapse
Had the same problem with my Touch HD (worked occassionally, getting worse over time - EasySync 4.6, Notes 7).
I switched to CommonTime mNotes Desktop - works perfect (not free and if there is anything to mourn, it's that they only offer subscriptions - that means annual fees...).
EasySync Pro 4.2.6 Install Solved!
I've had various issues reinstalling DeLorme and EasySync on my WM 6.1 Fuze, but this time, after the June ROM Official upgrade, it fails continuously with the \Windows\211\XCPCSyncSvr.exe Fails, Err 2. I performed a hard reset, started ActiveSync (From XP Pro SP3) but did NOT configure it, only set it up as Guest file access. Launched the EasySync exe, and when the program sync message came up, clicked on both DeLorme and EasySync Pro. Loaded up like a champ on the Fuze this time. Now I'm going back and setting up ActiveSync and EasySync configurations.
Whew!
Hi !
I just got an HTC Touch HD and I have the same problem with XTND Connect...
It worked with my old Touch Cruise. Well it almost worked because Notes is really a piece of s**t ! It worked on single way sync (from pda to pc). In dual way sync I had troubles, Notes having difficulties to treat the periodical items from the pda...
With the HD it works first time, and after you get an error popup at startup and while trying to synchronize... And then no way to reinstall correctly XTND on the pda...
Anyone has the solution, I'm interested !
I can't use any other software on my pc cause it's my profesionnal one and it's locked up from everywhere...!

install epocrates on WM 6.5; now w/ workaround solution

has anyone managed to get epocrates installed and working on a WM 6.5 rom?
or is there someway to resize Thomson's Clinical Xpert for VGA screens?
I've recently flashed the stock ATT fuze rom to one of Da_G's WM 6.5 roms. It's fast, stable, and has great battery life (currently sitting on my desk after 26 hrs+ w/ maybe 10% remaining, which is a tremendous improvement from the <12 hrs i was getting). Everything is fine and dandy, but the most important software for me does not work.
Epocrates installs but does not perform the initial autoupdate. it simply stalls at the update screen. I've tried both the wireless installation and desktop installation and both do not work. Speaking to their tech support, I've found that WM 6.5 is currently unsupported. Anyone get this working on a WM 6.5 rom?
In the meantime, i've installed Thomson's Clinical Xpert, but it's interface was probably designed for QVGA screens so the drop-down menus are not navigable on my VGA device. how can i go about resizing the application for a VGA screen (either through modification of the CAB file or if there is any application that can alter the resolution/stretch it)?
thanks.
workaround in this post below
Having the exact same issue- any help will definitely be appreciated. I love the new 6.5 interface and would prefer not to go back to 6.1 unless absolutely necessary
Same here. I just spent an hour trying to load Epocrates until I found this thread. I like the WinMo 6.5 much better than 6.1, but unless someone can find a workaround I guess I will have to revert.
wctom said:
Same here. I just spent an hour trying to load Epocrates until I found this thread. I like the WinMo 6.5 much better than 6.1, but unless someone can find a workaround I guess I will have to revert.
Click to expand...
Click to collapse
Same here. However, I did revert back to 6.1, still no luck on installing Epocrates. Even disabled the Microsoft encryption setting. Still no go.
what wm6.5 build is everyone using? i've so far only tried it on Da_G's 21198.
i'm really surprised that epocrates won't install on wm6.5 as i don't think very much has changed in the architecture from 6.1. the issue w/ epocrates is that it installs, but hangs during the initial autoupdate. the actual application is installed and can be opened briefly (i can see the the on top etc.), but the data itself is not there b/c it cannot be synced. when trying to install via the windows desktop installer, the autoupdate progress bar pops up and the download starts, but quits with an error about the autoupdater conduit.
if the conduit can be fixed/tweaked perhaps epocrates will work? has anyone tried moving files from a working 6.1 installation to an aborted install on wm6.5? i'd try to do it, but right now i don't have the time to rebuild my wm6.5 setup, which is also why i haven't flashed to one of the newer 6.5 builds.
for the time being i'm using Thomson Clinical Xpert, but its UI makes the application barely usable on my Fuze.
vexingv said:
what wm6.5 build is everyone using? i've so far only tried it on Da_G's 21198.
i'm really surprised that epocrates won't install on wm6.5 as i don't think very much has changed in the architecture from 6.1. the issue w/ epocrates is that it installs, but hangs during the initial autoupdate. the actual application is installed and can be opened briefly (i can see the the on top etc.), but the data itself is not there b/c it cannot be synced. when trying to install via the windows desktop installer, the autoupdate progress bar pops up and the download starts, but quits with an error about the autoupdater conduit.
That describes exactly my experience. I am using the FuFuROM based on 21202 on my HTC Diamond.
Click to expand...
Click to collapse
Same here. no epocrates and UpToDate in WM6.5
wctom said:
Same here. I just spent an hour trying to load Epocrates until I found this thread. I like the WinMo 6.5 much better than 6.1, but unless someone can find a workaround I guess I will have to revert.
Click to expand...
Click to collapse
It's same with me. I reverted to 6.1 bcos of epocrates and UpToDate. epocrates wont install as e'one here said. UpToDate installs and runs but cant display the final pages. It seems to use the IE and the pages are stored inside .jar files. somehow it cant go inside the .jar files to display the html files. It says the pages are not available.
I hope these issues will be solved soon.
BTW, I'm using TESS Premium 4.3 by Aman in my Elf.
Same
Wow same here, that's incredibly irritating
i finally had some free time to tinker this weekend and i've got epocrates running on wm 6.5!
following my previous hypothesis, i flashed to an old 6.1 rom and installed epocrates and performed an update. then i copied the "essentials" folder from "Program Files" to my sd card. i then flashed to wm 6.5 (da_g's 21501 beta 4 kitchen) and installed epocrates. as usual, it could not perform the initial autoupdate. instead, i closed the update application, deleted the existing Essentials folder, and copied the Essentials folder from my sd card that was from the intial 6.1 installation to Program Files. epocrates now works! i didn't bother with any of the add-on components/programs as i mainly need access to Rx, Sx, Dx, and labs tabs. of course, you likely will not be able to update epocrates from wm 6.5 as the crux of the problem is the autoupdater module.
Post perhaps?
Hey just wanted to add my 2 cents saying I'm having the same problem. I'm using HTC fuze with Mystic ROM by vRC1.0 based on Da_G's 21500. It's also a windows mobile 6.5 ROM.
Anyhow I was wondering if someone could post a zipped version of the essentials folder that works, so I don't have to reflash my ROM twice.
anyone has idea about UpToDate thing in WM6.5. Eventhough there is a workaround for Epocrates, I'm still stuck with 6.1 cos of UpToDate. Any input/suggestions wud be highly appreciated.
EDIT: I found about UpToDate in this forum http://forum.xda-developers.com/showthread.php?t=499741 but u hav to cook into ur own rom... too bad ..
KHTar said:
Hey just wanted to add my 2 cents saying I'm having the same problem. I'm using HTC fuze with Mystic ROM by vRC1.0 based on Da_G's 21500. It's also a windows mobile 6.5 ROM.
Anyhow I was wondering if someone could post a zipped version of the essentials folder that works, so I don't have to reflash my ROM twice.
Click to expand...
Click to collapse
i have an archive of the folder and i'd upload it, but i think it contains personal information. just flash 6.1 the next time you get around to flashing an upgraded 6.5 rom.
KHTar said:
Hey just wanted to add my 2 cents saying I'm having the same problem. I'm using HTC fuze with Mystic ROM by vRC1.0 based on Da_G's 21500. It's also a windows mobile 6.5 ROM.
Anyhow I was wondering if someone could post a zipped version of the essentials folder that works, so I don't have to reflash my ROM twice.
Click to expand...
Click to collapse
+1 for me too... I too would prefer not having to reflash again.
My Essentials folder won't be the same as yours. It will have my preferred insurance plans, for one thing.
Clearly, this hack allows ePocrates to run. However, it doesn't address the lack of updating, which is really one of the important features of ePocrates.
Since ePocrates is the primary reason I carry a smartphone device instead of a plain phone, I'll be sticking with a 6.1 ROM for now.
epocrates and active sync
I was wondering if anyone using the work around has been able to use active sync to sync with their computer. Does it break if epocrates tries to auto-update that way through the active sync? Is there a way to turn off the epocrates auto-updater so you can active sync?
I was able to use the work around without flashing my ROM. If you still have an old phone, you can have epocrates with Windows Mobile 6.1 on THAT phone, move the essentials to the storage card. Then install epocrates on your 6.5 device with the storage card in, and it works perfectly fine for me.
But now I'm afraid to sync my phone with my computer. I NEED epocrates to function at work. I want to be able to sync as that's one of the main benefits of a windows mobile phone, but keeping epocrates has to be priority one for me.
BTW, I checked with epocrates support, and they said they intend to support 6.5; they just don't know when.
Working now!
its now working officially with wm 6.5
greets,
A couple of days ago I installed the epocrates Rx on my brand new HTC HD2 (windows mobile 6.5) thru the standard installation procedure, and thought everything was running ok, until today that I just realized it doesn't support scrolling (I have to open the keyboard and use the arrow keys -extremely cumbersome!).
Then I searched on the Epocrates site for support and found this:
Question
Does Epocrates support Windows Mobile 6.5?
Answer
Epocrates does indeed support Windows Mobile 6.5.
While installation through a computer should be in essence the same as installing to a Windows Mobile 6.1 and older device, installing directly to a wireless Windows Mobile 6.5 device is a bit different.
Open Internet Explorer on your Windows Mobile 6.5 handheld and navigate to the following web address.
http://get.epocrates.com/?action=all
Please note that "www." is not part of the above web address.
Select the "Install Now" button for "Windows Mobile 5 and later."
Please take note of where Internet Explorer prompts use to save the Epocrates installer file (Main Memory or Expansion card). It is called:
OTAUpgraderSigned.exe
Open File Explorer on your handheld and navigate to My Device, My Documents. You should see the "OTAUpgraderSigned.exe" file there. Tap on it to begin the install process.
Should you encounter difficulties, please contact Epocrates support.
Don't know if anyone already tried the above, if so, please give some feedback. Does it work?
Anyway, I'll probably give it a try later in the day. Let's see what happens.
I have tried as Lovanova tells in his messagge but it still does not work scrolling in my HTC HD2.
Sorry to tell that this way described by epocrates support doesnt work in HD2.
hmm, you re right.
Scrolling does not work on HD2.
Damn!
They could at least update their product flag ship as so little that it doesnt look like MS-Dos-crap ... they ve got good looking apps on the iphone with nice fingerscrolling ...
its so ridicilous

LogMeIn + Windows Mobile 6.5 / 6.1.4 Problems

Hello Guys,
I recently contacted the LogMeIn Mobile support team and there are lots of people here which has problems using Logmein with your phone. Here is their reply:
--
Hello,
You can use a Windows Mobile device to connect to your LogMeIn computer.
Device requirements:
Windows Mobile 5/6/6.1
Touch Screen
ARM CPU
You must use Pocket Internet Explorer as third party browsers are not compatible with the LogMeIn Remote Control plug-in. You must also use the generic Windows Mobile keyboard, as specialized software keyboards may not transmit characters correctly.
Successfully tested devices:
Model
Also Known As
HTC Apache
PPC-6700, XV6700
HTC Mogul
PPC-6800, XV6800, P4000
HTC Touch
XV6900, P3450
HTC Touch Diamond
PPC-6950
HTC Touch Pro*
Fuze, P6500
HTC TyTN
Hermes, 8525
HTC TyTN II
Kaiser, Tilt, 8925
HTC Wing
P4350
Palm Treo 700wx
LG Incite CT810
Samsung Epix i907
Samsung Omnia i910
Samsung Saga SCH-i770
Samsung SCH-i760
Samsung SGH-i830
Note: If you're unable to use your HTC Touch Pro's keyboard during a remote control session, this is due to a key mapping problem brought upon by the device's eT9 text prediction software. While we do not directly support this, you can find other users' best practices and workarounds on the LogMeIn Community http://community.logmein.com.
Also, we have discovered an issue when connecting to a LogMeIn computer using a mobile device running Windows Mobile 6.1.4 / 6.5 and IE6 Mobile. Currently, it is NOT possible to connect with these devices due to incompatibility with the plug-in.
Please feel free to contact me if you have any further questions.
(Name Undisclosed)
--
What do you think about it?
Jeremy
Moved to Q&A as not Dev & Hack.
stylez said:
Moved to Q&A as not Dev & Hack.
Click to expand...
Click to collapse
Oops, okay.
So have they fixed this yet?
LogMeIN IE6/8 workaround
I have found a work around there is an ap called I.E. Toggle I got from PPCGeeks.com that allows you to switch back to Pocket IE from IE6. This is a great tool and use it just for this, best of all you dont need to soft reset it does it on the fly.
http://forum.ppcgeeks.com/showthread.php?t=65154
No joy in Win Mobile 6.5
I had logmein working nicely in win mobile 6.1 using IE Toggle, unfortunately having upgraded to 6.5 it no longer works.
When I log into logmein using PIE it directs me to download and install the RACtrlCE plugin but when I go to the link it downloads RACtrlCE.tsk (which does nothing useful) rather than RACtrlCE.cab like it used to. I tried installing it from a cab I had but that didn't work either so after searching around I ended up here. I guess logmein and 6.5 is still a no go, I have contacted logmein support to ask if they have an eta on a fix.
I really wish they'd just do a stand alone app for windows mobile, it would be so much easier.
I was actaully able to run logmein using IE toggle and a cooked rom on my TP2 using WM 6.5.1 (one of the *energy* roms). Although I just re-flashed to another rom that was more stable overall running WM 6.5 and now encounter the same problem described above. I am directed to the .tsk instead of .cab for the plugin, which does nothing...
formula84 said:
I have found a work around there is an ap called I.E. Toggle I got from PPCGeeks.com that allows you to switch back to Pocket IE from IE6. This is a great tool and use it just for this, best of all you dont need to soft reset it does it on the fly.
http://forum.ppcgeeks.com/showthread.php?t=65154
Click to expand...
Click to collapse
wow. thank you. logmein finally works on my samsung saga. i am however very dissapointed in the support from logmein. i had an email chain with their support dept about the issue with windows mobile 6.1 . First they said it works, then i finally got them to achnoledge that logmein has an issue with wm 6.1 . After that they would not even respond to my emails. I would ask them when they expected a fix and no answer at all.
i wish there was an alternative to logmein other than rdp or others that require port forwarding .
I've now found that if you rename the downloaded RACtrlCE.tsk file to RACtrlCE.cab it will install and then logmein will work using IE toggle. Hope that helps you out.
I got logmein to work on my TP2 WM65. I installed PIE
Rebooted the device.
Then installed IE Toggle
Launched IE Toggle and selected Pocket IE and went to logmein
Logged in installed the plug in and it worked.
Sorry if this was posted previously.
Thanks to XDA-Developers and PPCGeeks
alejrivas said:
I got logmein to work on my TP2 WM65. I installed PIE
Rebooted the device.
Then installed IE Toggle
Launched IE Toggle and selected Pocket IE and went to logmein
Logged in installed the plug in and it worked.
Sorry if this was posted previously.
Thanks to XDA-Developers and PPCGeeks
Click to expand...
Click to collapse
Genius many thanks
blisteringblue said:
Genius many thanks
Click to expand...
Click to collapse
Spoke to soon, there is an issue with it that I could not fix. After loading these cabs Logmein did indeed work.
However the changes caused my TP2 to not be able to display text conversations. You click on a text message and it would display the keyboard and say one conversation selected but you were still seeing the default list of texts, you couldn't see what you were typing? SMS messaging still worked but you couldn't use the default conversations lists.
I have since removed all the cabs for logmein and SMS messages are displaying perfectly again?
This cab breaks the text messaging, it seems: XDA WM 6.1 P.I.E For WM6.CAB.
I'm able to get everything working if I don't install that cab. My only issue is that the key mapping with KforTouchPro_v1.0.0.3.CAB (which I believe is needed also) isn't quite perfect, from what I can tell.
SOLUTION - this works
Heres a solution for those of you who have been finding that logmein wants to download RACtrlCE.cab file to install on your phone and that this doesnt seem to do anything, it wont install. Heres why. Youll love this, its actually quite simple.
When the file downloads it says its a cab file, which should by all rights install, however on my phone it brings up the "Windows Mobile Today" which allows you to select backgrounds/screensavers for your mobile. Why? Its because when it saved the file it put a hidden .tsk on the end a on windows mobile file name extensions like .tsk .jpg .avi etc are hidden from you so all you get is the name of the file but not its .jpg bit so "john.jpg" becomes just "john"... its named the file RACtrlCE.cab.tsk but your mobile doesnt show you this file name is says its a .cab so this is why it doesnt fire up.
So what you need to do is rename the RACtrlCE.cab.tsk back to RACtrlCE.cab and it will run.
2 WAYS TO DO THIS....
Sync your device on your pc or mac and use "explore" to get in to your mobile folders from your computer and find RACtrlCE.cab.tsk and on a PC it will show the needed .tsk bit
**(provided your PC views mode isnt set to hide filetypes - if it is go to windows explorer on pc, tools menu at the top of screen, folder options, and untick "hide extensions for known file types". If your on Win7 youl find the folder options in CONTROL PANEL... does the same thing)**
Right so now you can see your RACtrlCE.cab.tsk and youve renamed it RACtrlCE.cab unhook the phone from pc and go to the folder where RACtrlCE.cab is and click it and hey presto, it installs perfectly.
Now the next bit is to use the IE6 toggle software if your getting problems and this will allow you to switch from IE6mobile to PocketIE6 which can run the logmein application. (IE6 toggle page is listed earlier in this same thread
METHOD2:
Oh yes if you want to do this renaming of the file on your phone without PC connected, "File Explorer" wont show you the .tsk bit on the end, its hidden and always will be because "file explorer" is dumbed down. What you need is a tool called "total commander" which I think is free (?). Install this and its a powerful file explorer which does show you the .tsk bit which you can easily rename to just .cab and then you can double click the file RACtrlCE.cab in total commander and hey presto the .cab installs.
Hopefully this fix will blow you away.
This was done on a HTC Touch HD2 phone with original T-Mobile ROM unlocked and put on to the latest generic HTC official ROM.
error al intalar IE toggle 1.1
alejrivas said:
I got logmein to work on my TP2 WM65. I installed PIE
Rebooted the device.
Then installed IE Toggle
Launched IE Toggle and selected Pocket IE and went to logmein
Logged in installed the plug in and it worked.
Sorry if this was posted previously.
Thanks to XDA-Developers and PPCGeeks
Click to expand...
Click to collapse
disculpa pero quise instalar el IE Toggle 1.1 me marcar error como le puedo hacer para se pueda instalar en realidad ocupo instalar logmein por favor díganme

Categories

Resources