Related
Is it possible to deactivate the virtual keyboard when, for example, a textbox is selected?
Regards
I've already asked this question somewhere but no answer :|
B.
Try this:
HKEY_CURRENT_USER\ControlPanel\Sip>:
Create or change DWORD TurnOffAutoDeploy from 0 to 1
johanromijn said:
Try this:
HKEY_CURRENT_USER\ControlPanel\Sip>:
Create or change DWORD TurnOffAutoDeploy from 0 to 1
Click to expand...
Click to collapse
Edit 2: worked ... had to re-enter reg change
Edit:to disable sip completely use
HKEY_CURRENT_USERControlPanelSipAllowChange (DWORD 1->0)
I tried the first option and it didn't work. I'll try the second option and see the result.
Thanks
boinger66 said:
HKEY_CURRENT_USERControlPanelSipAllowChange (DWORD 1->0)
Click to expand...
Click to collapse
That really messed things up. Changing it didnt work, so I tried a soft reset. Once I did, the keyboard was permanently on the screen and refused to go away at all!! Changed it back to '1', did a soft reset and things were back to normal.
If you type something using the HW keyboard when the software keyboard is displayed then it should go away and shouldn't reappear next time.
adityasen said:
That really messed things up. Changing it didnt work, so I tried a soft reset. Once I did, the keyboard was permanently on the screen and refused to go away at all!! Changed it back to '1', did a soft reset and things were back to normal.
Click to expand...
Click to collapse
that setting is to completely turn off sip not disable auto pop up
hnparedes said:
I tried the first option and it didn't work. I'll try the second option and see the result.
Thanks
Click to expand...
Click to collapse
the first option does work but you have to make sure the change is commited to memory in the registry
try using a program called Ceregeditor
available here
http://ceregeditor.mdsoft.pl/
I couldn't get it to work either, created the dword, saved it, soft rest and checked it was ok, still didn't work
the best would be a method to deactivate SIP only when physical keyboard is open
l0st.prophet said:
I couldn't get it to work either, created the dword, saved it, soft rest and checked it was ok, still didn't work
Click to expand...
Click to collapse
its workign for me ... try using the program ceregeditor
boinger66 said:
its workign for me ... try using the program ceregeditor
Click to expand...
Click to collapse
I did, I tired it with two differant editors on the phone (Resetting to normal after each attempt) then tried it trough activesync with that program
boinger66 said:
that setting is to completely turn off sip not disable auto pop up
Click to expand...
Click to collapse
Yea that's what I was looking for. I want to disable it completely. Just use the hardware keyboard. But it doesn't work.
l0st.prophet said:
I did, I tired it with two differant editors on the phone (Resetting to normal after each attempt) then tried it trough activesync with that program
Click to expand...
Click to collapse
so when you hit a text field the sip is still popping up ?
boinger66 said:
so when you hit a text field the sip is still popping up ?
Click to expand...
Click to collapse
Yeap,
I've tried both registry chagnges today
First one doesnt work at all, sip is still popping up on thet field
Second one made a little mess in settings - the keyboard stayed all the time, there was no option to disable it so I've roll back settings to default and ... still waiting for solution
Regards
B.
So there is no solution so far or ?
thanks
myrin
I can think of a solution but the problem is who will implement it (it is not so hard):
If the physical keyboard is open it is detectable right? (the system already reacts to it, may play a sound, presents the side sortcuts, rotates the screen)
Why not in addition to those actions, also SWITCH SIP to an EMPTY one? This way even if we cannot easily interrupt the system from trying to pop up the SIP, at least it will pop up a "null" one!
What do you think?
did anyone find the correct solution for this to deactivate sip keyboard when hardware keyboard is opened.
vijay
Hi, I've posted this in lowyat.net forum, but I wish to post this here as well, because I think this is a very significant tweak. Anyways, this method was originally found in this forum, just that I think no one suggested this method to speed up the Touch Pro.
Here comes the tweak:
I've been facing this issue where the SIP menu (aka input menu), takes like 2 seconds to popup when you want to switch the input method, making me wonder if I didn't manage to press the little triangle... My old PDA didn't have such an issue.
So after some searching, I found this:
give it a shoot , Get a registry editor ,
1. Export HKCR\CLSID (will save to a *.reg file)
2. Del or Rename HKCR\CLSID
3. Import the backup of HKCR\CLSID
Turn off your device about 15 sec and reset
http://forum.xda-developers.com/showthread...t=301433&page=1
And yup, it works!! The SIP menu is now very responsive, and the system is now faster, and more responsive. Games do not lag anymore, especially the old ones.
Anyway, I didn't have to reset to see the effect.
In that thread, someone suggested the renaming method. Actually I used that method, but found that I can't rename the CLSID back because the system created another one. Luckily my Resco Registry Explorer allows me to copy and paste the keys from the old folder into the new folder. If not, it'll mean another hard reset. And one more thing, DO NOT SOFT RESET BEFORE YOU GET THE CLSID BACK!! "Turn off" in the thread means sleep, cuz unlike our TP, old PDAs cannot really be "turned off". It's best to backup your PDA before performing this procedure.
Anyone tried this fix?
SIP changing is really quick now. The device seems to be faster,but maybe it's a "placebo effect". Thanks for the tip,something helps this.
Some magic. It really works.
Thank you.
Thats Awesome
Wow! This tweak works perfect! BIG THANK for posting this here!
Btw,I know about this already few years,from that time I have tested HTC Himalaya,but I never tried it till now.
well, i think it works.
but i am not sure.
like mentioned in this thread, it could be a placebo effect.
cause i have not reset my TP for a while.
and after this tweak you have to reset, and after a reset the TP is always a little bit faster.
but if you aplly this tweak as instructed, nothing can go wrong so......
if you don`t try you`ll never know
groofoo said:
well, i think it works.
but i am not sure.
like mentioned in this thread, it could be a placebo effect.
cause i have not reset my TP for a while.
and after this tweak you have to reset, and after a reset the TP is always a little bit faster.
but if you aplly this tweak as instructed, nothing can go wrong so......
if you don`t try you`ll never know
Click to expand...
Click to collapse
As I said,SIP changing is really fast now,so at least one benefit you get. Before was 3-5 seconds,now <1s.
sorry to be a bother. but with PHM regedit i held my cursor over the CLSID key in the registry rather than making a backup. I did an export. stupidly I deleted the key instead of renaming it. now when i try to import the key back in, first off the import choice in tools is greyed out and when i try restore and selecting the file I get "error". I'm hoping if all CLSID's are the same someone would be kind enough to bail me out by uploading their CLSID backup.
thanks in advance
-N
update: false alarm, solved it.
I too did this tweak, and did notice that in my threaded SMS, opening the QWERTY had an immediate response. I'm about 2 hours since I've done it, so I will see how this is going this time tomorrow. I hope this is perminant, and I see this response delay with the input method gone forever.
THANKS FOR SHARING!!!
Awesome post for someone new to this forum!! Thanks a lot! System does seem faster. I have an old game, Warfare Inc, that I still like to play once in awhile. Hasn't run smoothly on my TP until now.
I tried this but all hell broke loose! now my tp wont even start.. so im guessing something went terribly wrong.. now i have to hard reset the thing. and loos all my stuff in there.
at first everything was ok! but later I spoted that GPS reception was totally lost - no fix enymore! Reinstaling NETCF3.5 seems to fix it.
novakry said:
sorry to be a bother. but with PHM regedit i held my cursor over the CLSID key in the registry rather than making a backup. I did an export. stupidly I deleted the key instead of renaming it. now when i try to import the key back in, first off the import choice in tools is greyed out and when i try restore and selecting the file I get "error". I'm hoping if all CLSID's are the same someone would be kind enough to bail me out by uploading their CLSID backup.
thanks in advance
-N
Click to expand...
Click to collapse
Here you go
does it work on htc diamond? was wondering if anyone experiences the lag when typing with phone keypad.. the words 'take their time' to appear.
I tried and my TP wouldn't boot. Had to hard-reset. I made sure the CLSID key was re-created before I did a soft-reset.
Hmm, what does this tweak actually do? export and import your registry settings?
I'm unclear as to how that's making anything better?
this also hosed up my TP. Wont boot. Have to restore it now errrr
Those with "hosed" TP's make sure you really export the reg file, and not copy/paste. I could not find the option in the reg part of Total Commander so I used TRE, another free reg edit tool found on this forum many years ago Please search for it as it is so simple to use. Would have uploaded for you, but am not using my regular pc
I think that we don't even need to export and import the reg key. It seems to me like only rename the key (ex CLSIDold) and renaming it back (CLSID) then shut down for some seconds, works too.
It looks like working to me that way. Now SIP change takes one sec.
WOW !!!
Does anyone know of a fix for the long lag in answering calls for the HTC Touch Pro? If you can help please write back in the simplest terms! I am just learning how to use the phone and finally learned how to download and install cab files.
Thanks!
Kermy33 said:
Does anyone know of a fix for the long lag in answering calls for the HTC Touch Pro? If you can help please write back in the simplest terms! I am just learning how to use the phone and finally learned how to download and install cab files.
Thanks!
Click to expand...
Click to collapse
What have you installed (to cause this problem)?
Do a search for "diamond tweak". There is an option to shorten the delay when an incoming calls rings. Perhaps that will help.
if you have S2U2 installed, you could try uninstalling or disabling that. You could also switch from the Diamond dialpad to the regular WinMo dial pad (the screen you see when go to the dialer). You can make this change using the Advanced Config Tool (i'm pretty sure, if not, then try Diamond Tweak).
There's also the initial delay value in the registry as mentioned in the last post.
These should all help, some more than others though.
there actually is an issue with Diamond tweak and advanced config...
if you use them to set your data disconnect time if re writes a registry value that makes your phone fritz when trying to answer calls.in reg editor go to HKLM/comm/connmgr/planner.
Look for a entry of suspendresume. change that to #777. shold cure your issue. while you are there if you want to help out your battery change the Cachetime value to 60. that will kill your data afret 60 seconds of no use.
weird.....suspendresume on mine shows ~GPRS! as a value??
schollianmj said:
in reg editor go to HKLM/comm/connmgr/planner.
Look for a entry of suspendresume. change that to #777. shold cure your issue. while you are there if you want to help out your battery change the Cachetime value to 60. that will kill your data afret 60 seconds of no use.
Click to expand...
Click to collapse
thanks for the suggestions and how do I fix the hang up lag?
The slow delay in answering calls was a problem right out of the box. When I installed the slide to answer function the phones responsiveness greatly improved. There is also a huge lag from the time I end a call to the time I can go back to my home screen. Any suggestions for fixing that lag?
Kermy33 said:
The slow delay in answering calls was a problem right out of the box. When I installed the slide to answer function the phones responsiveness greatly improved. There is also a huge lag from the time I end a call to the time I can go back to my home screen. Any suggestions for fixing that lag?
Click to expand...
Click to collapse
no idea, but i have the same thing
No luck with the tweak mentioned in post #5. However, after I replaced the HD CallerID with the default WM one (which is not that bad!) the phone responds rapidly :
1) Zero lag between first caller's ring and screen respond.
2) Almost zero lag between first caller's ring and bluetooth handset ring.
3) Less than 0.5 ring before the device starts ringing.
Only a minor problem : The bluetooth icon does not show any more on the taskbar although the BT connections works fine !
Ok, where do you change to the default caller ID? I tried the registry edit and changing to the default dialer skin and had the same problem. This is so frustrating! About 50% of the time when it rings I hit the answer button and nothing happens. It even takes about 10 seconds before the screen changes from the home screen to the phone screen when it starts ringing.
How big a file for the ringtone are you using? The bigger the file, IMHO, the longer it'd take for the phone to load it...
Delete your call history and the lag after hanging up should disappear.
Htc Diamond Regedit
Hello,
I have a problem with my HTC.
I used PHM Regsitry. I found the Suspendresume key, and it wrote GPRS!
I clicked the key, and because I did not know who to change the value, I just wrote #777.
Now when I try to go there and change what I did, when I click Settings in regedit, it is emty or the program crackes.
Please help.
Paches and fixes
Goto HTC's website. There is a patch to resolve the issue for the delay in sound when answering calls.
Regarding the delay after the phone cal has been discontinued use "Advanced_Configuration_Tool_v3.3" (search this site). There is a setting that you can change to resolve it (default is 3000ms[3sec])
Shawn Botha said:
...
Regarding the delay after the phone cal has been discontinued use "Advanced_Configuration_Tool_v3.3" (search this site). There is a setting that you can change to resolve it (default is 3000ms[3sec])
Click to expand...
Click to collapse
This hangup delay is one of the first settings I changed when I got the phone. Almost everytime I scroll through contacts phonebooks, the phone would accidentally dial, so I press end end end repeatedly, but by the time it hangs up, the other party already had my caller id, and would call back asking why I called.
Why is this 3 sec delay built-in? There must be a reasoning behind it.
And while we're on the delay issue, why did they set the camera up with a 3-5 second delay to shoot? Is it for the autofocus? I got rid of the reg setting, now the camera is faster, and no autofocus issues... so why were these delays there to begin with?
atlaswing said:
Why is this 3 sec delay built-in? There must be a reasoning behind it.
And while we're on the delay issue, why did they set the camera up with a 3-5 second delay to shoot? Is it for the autofocus? I got rid of the reg setting, now the camera is faster, and no autofocus issues... so why were these delays there to begin with?
Click to expand...
Click to collapse
How did you changed the shooting delay in camera settings? What registry edit did you made?
joao pinto said:
How did you changed the shooting delay in camera settings? What registry edit did you made?
Click to expand...
Click to collapse
its in Schaps Advanced config 3.3 under Camera. But i digress...
it still begs the question, from an engineering standpoint, why did they set up these delays and lags?
bobok13 said:
Hello,
I have a problem with my HTC.
I used PHM Regsitry. I found the Suspendresume key, and it wrote GPRS!
I clicked the key, and because I did not know who to change the value, I just wrote #777.
Now when I try to go there and change what I did, when I click Settings in regedit, it is emty or the program crackes.
Please help.
Click to expand...
Click to collapse
I don't know if you resolved your issue.
You just have to erase "~GPRS!" and type in "#777"
No quotes of course.
I use Dotfred Task Manager 3.1
Same problem
I recently got this problem with the answer lag, I was using the same rom, same applications, same everything for the past few weeks. I am not entirely sure what caused the problem.
What would happen is when I get a call and I hit the answer key, the phone stops ringing and vibrating but it would still be flashing and has the phone number shown, I also have the slider installed and when I slide it, the same problem comes up!
In my reg editor, I do not have HKLM!
Any advise would be appreciated, this is getting annoying for both sides of the call.
Thank You
UPDATE
I actually may have found the solution, I removed the wireless manager shortcut when holding the answer button, and so far it's been working very quickly.
Go to settings -> Buttons and switch "button 1" from w/e u had to "<none>" I didn't even restart my phone...
2nd Update
Nope, just got an international call and it's holding it up... maybe it has to do with caller ID ?
HKLM is HKey_Local_Machine
Hey guys, hopefully you can help me out with some of my queries on customizing wm6.5.
How can i set the lockscreen to be always lit, instead of dim on wakeup/lock. I cant find any backlight tab in the power settings. Is there anything in the registry for it?
What about the constant vibration on normal+vibration mode, can I have it set to the same ryhtmic vibration for manner mode? I know there's an app called VAlert, but is there any registry tweak for it? Also, can I stop the music/vibration for a text after I tap on the screen? As for now, it'll only stop if i press the End Key.
And one more thing, can I remove the BCC CC From to subject fields etc from Messaging. I seem to recall there's a tool for it but I cant remember what it's called.
Thanks =D
redganger said:
Hey guys, hopefully you can help me out with some of my queries on customizing wm6.5.
How can i set the lockscreen to be always lit, instead of dim on wakeup/lock. I cant find any backlight tab in the power settings. Is there anything in the registry for it?
Click to expand...
Click to collapse
It may be under Start->Settings->Personal tab->Lock, or on my current ROM, Start->Settings->System tab->Power->Backlight, and there's a checkbox.
What about the constant vibration on normal+vibration mode, can I have it set to the same ryhtmic vibration for manner mode? I know there's an app called VAlert, but is there any registry tweak for it? Also, can I stop the music/vibration for a text after I tap on the screen? As for now, it'll only stop if i press the End Key.
Click to expand...
Click to collapse
I think VAlert should use a registry tweak to do it. Not sure though... As to the second part, I don't think that's possible...
And one more thing, can I remove the BCC CC From to subject fields etc from Messaging. I seem to recall there's a tool for it but I cant remember what it's called.
Click to expand...
Click to collapse
Not seen that... Although in 6.X ROMs messaging uses html based form creation, so have a look for email.htm or new_email.htm in \Windows, and see if there's anything discernible in there.
Just found something new that may be of interest for question one...
http://forum.xda-developers.com/showthread.php?t=413461
l3v5y said:
It may be under Start->Settings->Personal tab->Lock, or on my current ROM, Start->Settings->System tab->Power->Backlight, and there's a checkbox.
I think VAlert should use a registry tweak to do it. Not sure though... As to the second part, I don't think that's possible...
Not seen that... Although in 6.X ROMs messaging uses html based form creation, so have a look for email.htm or new_email.htm in \Windows, and see if there's anything discernible in there.
Click to expand...
Click to collapse
Thanks for all your replies.
I have checked the link you provided and tried what have been suggested but unfortunately they did not work. My LockLevel key kept going back to 0 after soft reset.
Well I might have to just use VAlert in the end. Will check out the email.htm too.
redganger said:
Thanks for all your replies.
I have checked the link you provided and tried what have been suggested but unfortunately they did not work. My LockLevel key kept going back to 0 after soft reset.
Well I might have to just use VAlert in the end. Will check out the email.htm too.
Click to expand...
Click to collapse
Right... Very odd. Did it work whilst LockLevel wasn't 0? If so, I can write a quick applet that sets it to whatever at startup.
l3v5y said:
Right... Very odd. Did it work whilst LockLevel wasn't 0? If so, I can write a quick applet that sets it to whatever at startup.
Click to expand...
Click to collapse
Well, I am not sure if I needed to restart for it to be take effect or not, but it didnt work when I lock the phone after I edited the registry. Screen was still dimmed. So I am not sure if it was because it didnt work, or the registry change didnt take effect.
redganger said:
Well, I am not sure if I needed to restart for it to be take effect or not, but it didnt work when I lock the phone after I edited the registry. Screen was still dimmed. So I am not sure if it was because it didnt work, or the registry change didnt take effect.
Click to expand...
Click to collapse
As far as I remember, the screen remains dim till you tap it... Does tapping it bring the screen back to normal brightness?
Yes when I tap it, it lights up. But what I am looking for, is for it to not dim in the first place, to have it light up once you turn it on.
redganger said:
Yes when I tap it, it lights up. But what I am looking for, is for it to not dim in the first place, to have it light up once you turn it on.
Click to expand...
Click to collapse
Ah right.
I don't think that's possible...
l3v5y said:
Ah right.
I don't think that's possible...
Click to expand...
Click to collapse
AH alright =( Thanks for your help anyway, appreciate it
My screen goes crazy. During a call up to my ear it flips to horizontal, changes out of key pad view and not always to mute/speakerphone... keys view, sometimes to contact info, and can be a nightmare to get back to "end call." I've found times when the caller hung up but the TP2 put them on hold and kept my time going.
Any programs and or reg hacks to:
1) stop the horizontal flip when placed to an ear, and
2) keep it in keypad mode or general call mode?
Real pain when dialing into a system that requires keypad responses. Everytime I put it back to my ear I have to go through a crazy sequence to get back to the key pad.
This is my only complaint wth this phone, it's not easy to use as a phone!
Thanks.
I have the same problem when dialing into VM, or into any call queue. I looked through the registry a bit. Didn't see anything obviously labeled.
yeah me too. Only thing I could find was using Gyrators' exception list to not rotate the phone, but it wasnt 100% reliable. I would *LOVE* to find a way to stay in keypad mode too.
Hi All - I guess I'm just jumping on the bandwagon but I have the same issue and find it annoying. I loaded the 'incall screen tweak' but that didn't work. Any help more seasoned members than I could offer would be greatly appreciated.
Cheers!!!
I had the same issue too, whenever I put my phone up to my ear (left handed) it would go into landscape. The fix is simple but you have to edit a registry setting. I'm going by memory here, so please forgive the vague info
1) make sure to backup your reg info
2) using your favorite reg edit program, goto
HKCU\Software\HTC\HTCSENSOR\GSensor\Whitelist
3) now this is the part I kind of forgot, you need to find a string with the DATA value that includes "phone" or "dailer"
4) delete that string
5)soft reset and give it a try, the phone shouldn't go into landscape whenever you turn it during a call.
AstarteSV said:
I had the same issue too, whenever I put my phone up to my ear (left handed) it would go into landscape. The fix is simple but you have to edit a registry setting. I'm going by memory here, so please forgive the vague info
1) make sure to backup your reg info
2) using your favorite reg edit program, goto
HKCU\Software\HTC\HTCSENSOR\GSensor\Whitelist
3) now this is the part I kind of forgot, you need to find a string with the DATA value that includes "phone" or "dailer"
4) delete that string
5)soft reset and give it a try, the phone shouldn't go into landscape whenever you turn it during a call.
Click to expand...
Click to collapse
OK, I went where you said, but no dialer, and only phone entry is:
Phone/Lock/Compose/Picture
String= Dialog
And deleting this stopped "lefty" in call flipping? Doesn't make sense to me. Doesn't seem to only control dialer or phone.
Please confirm or anyone out there please help. I don't want to delete something don't understand.
Can I simple change Dialog to something like "Zero" or "0"?
MLT2004 said:
OK, I went where you said, but no dialer, and only phone entry is:
Phone/Lock/Compose/Picture
String= Dialog
And deleting this stopped "lefty" in call flipping? Doesn't make sense to me. Doesn't seem to only control dialer or phone.
Please confirm or anyone out there please help. I don't want to delete something don't understand.
Can I simple change Dialog to something like "Zero" or "0"?
Click to expand...
Click to collapse
That's it! forgot what the process name was, but yeah, deleting that stopped the phone from trying to change to landscape during a phone call. Deleting that will tell the G-Sensor not to change the orientation of the phone's screen during a phone call, however it also tells it not to change the orientation during a picture (which wasn't a big deal for me cuz I can change it when I view them in windows). You can always look up the process in google or even the forum search tool if you're still scared.
If anyone else is interested I tried a "partial" delete of the suggestion above. I created a new string leaving out the Phone.
Lock/Compose/Picture
String= Dialog
deleted old string with phone/....
So far no more "lefty" crazy problems, and pictures seem to appear in landscape.
Here's hoping all is OK!
MLT2004 said:
If anyone else is interested I tried a "partial" delete of the suggestion above. I created a new string leaving out the Phone.
Lock/Compose/Picture
String= Dialog
deleted old string with phone/....
So far no more "lefty" crazy problems, and pictures seem to appear in landscape.
Here's hoping all is OK!
Click to expand...
Click to collapse
Awesome, good job!
I installed Gyrator 2. Just create a new event with the phone as the application. Nothing for orientation, nothing on stylus, and rotate screen for actions. Then promote the event to the top. Highlight your new phone event and select orientation, it will have a check mark and a number one next to the event. It hasn't failed on me yet and I use the key pad all day long with my job!
I just upgraded to the Verizon official WinMo 6.5 and the registry hack doesn't seem to work anymore, and I'm having issues getting Gyrator to work, has anyone resolved this issue for WinMo 6.5?
AstarteSV said:
I just upgraded to the Verizon official WinMo 6.5 and the registry hack doesn't seem to work anymore, and I'm having issues getting Gyrator to work, has anyone resolved this issue for WinMo 6.5?
Click to expand...
Click to collapse
I haven't had any of the issues with the 6.5 upgrade that were mentioned with 6.1. Haven't needed to add S2U2 since the screen lock is built in and the phone is much more responsive when placed to the ear and then moved away to access the keypad. It's not perfect but vastly improved over 6.1...
I guess my point is try it the way it is with 6.5 and see if you thinks its better. leave gyrator and reg hacks aside for a few.