Can anyone post a HTC ASIA(taiwan) ROM image ? - myTouch 3G, Magic Android Development

Does anyone here have an HTC Asia version of Magic ? If so can you post a dump of the ROM ? Or backup using nanroid and post the files. Would like to see the Differences between this rom and the existing roms floating around.
Thanks in advance ...

I am using hk CHT version but unable to boot recovery image
Therefore cannot run the backup to dump my Rom ....

Yes, I am also holding a HK version of HTC. Cannot boot into recovery mode too. Hope anyone can help.

You can try to fastboot daldroid-recovery.img
(more info on this thread http://forum.xda-developers.com/showthread.php?t=523680).
nandroid is included, so I hope you'll be able to dump your rom.
If the recovery does not fastboot, or if you don't need to, do not flash the recovery image.
Hope this helps,
daldroid
--- edit --
If you decide to try the image and are successful, please take the time to post in that thread that it worked for you and info about your device (basically the info that appears on fastboot screen)
Thank you

daldroid, thanks a lot
your method and files worked on my Taiwan version of HTC magic...
a tip and reminder for Taiwanese users:
use daldroid's recovery + rooted images
if you simply use the recovery image, and flash the rom from haykuro, your magic will be just stuck at the logo
however, daldroid's rom file is english version and no Chinese input method is included
you can still see chinese characters on it, though

richyyun said:
daldroid, thanks a lot
your method and files worked on my Taiwan version of HTC magic...
a tip and reminder for Taiwanese users:
use daldroid's recovery + rooted images
if you simply use the recovery image, and flash the rom from haykuro, your magic will be just stuck at the logo
however, daldroid's rom file is english version and no Chinese input method is included
you can still see chinese characters on it, though
Click to expand...
Click to collapse
Hi, thx for the reply.
Do I apply daldroid's recovery + rooted images = flashing a complete new rom?
And only English?
Since in my mind, root the rom is not equal to flash a new rom. Am i right? Correct me please if I am wrong.

daldroid said:
You can try to fastboot daldroid-recovery.img
(more info on this thread http://forum.xda-developers.com/showthread.php?t=523680).
nandroid is included, so I hope you'll be able to dump your rom.
If the recovery does not fastboot, or if you don't need to, do not flash the recovery image.
Hope this helps,
daldroid
--- edit --
If you decide to try the image and are successful, please take the time to post in that thread that it worked for you and info about your device (basically the info that appears on fastboot screen)
Thank you
Click to expand...
Click to collapse
Hi, daldroid, it helps alot. But may I ask for more information on developing a new recovery rom. About how to write the recovery rom and new rom. Thx.

jacky11287 said:
Hi, thx for the reply.
Do I apply daldroid's recovery + rooted images = flashing a complete new rom?
And only English?
Since in my mind, root the rom is not equal to flash a new rom. Am i right? Correct me please if I am wrong.
Click to expand...
Click to collapse
yes, i did flash the rom completely...
and since this rom is rooted, you i do whatever i want afterwards...
now i'm installing HTC_CIME (please google it)
i'll post if i succeed later

richyyun said:
yes, i did flash the rom completely...
and since this rom is rooted, you i do whatever i want afterwards...
now i'm installing HTC_CIME (please google it)
i'll post if i succeed later
Click to expand...
Click to collapse
GREAT, waiting for your reply.....
I need to have root to create wifi connection in my school which is wap2 enterprise authentication....

richyyun said:
daldroid, thanks a lot
your method and files worked on my Taiwan version of HTC magic...
a tip and reminder for Taiwanese users:
use daldroid's recovery + rooted images
if you simply use the recovery image, and flash the rom from haykuro, your magic will be just stuck at the logo
however, daldroid's rom file is english version and no Chinese input method is included
you can still see chinese characters on it, though
Click to expand...
Click to collapse
If Daldroid methord works can you post the image or the backup files?
Thanks to Dakdroid for his work and to you for your effort

You should be able to follow this guide from Daldroid plus use the daldroid-recovery.img (only boot it) and then apply the new rooted original HTC rom. (remember the Nandroidbackup first!)
http://forum.xda-developers.com/showthread.php?t=523680

jacky11287 said:
GREAT, waiting for your reply.....
I need to have root to create wifi connection in my school which is wap2 enterprise authentication....
Click to expand...
Click to collapse
Hi, I successfully installed HTC_CIME, which allows me to input Chinese using handwriting, pinyin or stroke...
I used the file on this link:
http://forum.xda-developers.com/showthread.php?t=512530
and extract the files on sdcard and use ASTRO (File manager on android) to exact copy files in /lib and /lib/zi --> /system/lib and system/lib/zi on magic
afterwards, i installed HTC_CIME.apk in /app
-----------
BTW, i flashed the rom to gain root access...
i need it for aNetShare, which can make magic a wifi access point (ad hoc mode)

r1tman said:
If Daldroid methord works can you post the image or the backup files?
Thanks to Dakdroid for his work and to you for your effort
Click to expand...
Click to collapse
Daldroid's method works!
I used exactly the two files Daldroid provided on http://forum.xda-developers.com/showthread.php?t=523680
----- links --------
Recovery:
http://www.megaupload.com/?d=JYPX30HN
Rooted (adb shell) Original HTC ROM for Magic:
http://www.megaupload.com/?d=65MNJXYS

richyyun said:
Daldroid's method works!
I used exactly the two files Daldroid provided on http://forum.xda-developers.com/showthread.php?t=523680
----- links --------
Recovery:
http://www.megaupload.com/?d=JYPX30HN
Rooted (adb shell) Original HTC ROM for Magic:
http://www.megaupload.com/?d=65MNJXYS
Click to expand...
Click to collapse
Ok What I meant was if it worked, could anyone use these files and dump their ASIA ROM dump or ASIA nanroid backup. I already have the
dalroid files
Thanks

I've already dump my HTC Magic Taiwan version, what file you want?
They're all img files.

richyyun said:
Hi, I successfully installed HTC_CIME, which allows me to input Chinese using handwriting, pinyin or stroke...
I used the file on this link:
http://forum.xda-developers.com/showthread.php?t=512530
and extract the files on sdcard and use ASTRO (File manager on android) to exact copy files in /lib and /lib/zi --> /system/lib and system/lib/zi on magic
afterwards, i installed HTC_CIME.apk in /app
-----------
BTW, i flashed the rom to gain root access...
i need it for aNetShare, which can make magic a wifi access point (ad hoc mode)
Click to expand...
Click to collapse
OK...Great thx...
I think I will first do a backup of my rom before rooting.
But did you successful make a backup? I mean, use daldroid's recovery and which version of SPL did you use?

Joost39 said:
You should be able to follow this guide from Daldroid plus use the daldroid-recovery.img (only boot it) and then apply the new rooted original HTC rom. (remember the Nandroidbackup first!)
http://forum.xda-developers.com/showthread.php?t=523680
Click to expand...
Click to collapse
Hi Joost39, I am new to Android. Maybe it is one of the newbie question.
Can I nand backup my phone before flashing anything?
I read, it requires flashing the recovery, root permission. So is there no way to backup my phone before i got root access?
Thx..

I uploaded my Taiwan Magic Nandroidbackup(recovery, system & boot), is it possible to make a rooted rom of it?
http://www.megaupload.com/?d=5FBNJ2BD
thx

jacky11287 said:
Hi Joost39, I am new to Android. Maybe it is one of the newbie question.
Can I nand backup my phone before flashing anything?
I read, it requires flashing the recovery, root permission. So is there no way to backup my phone before i got root access?
Thx..
Click to expand...
Click to collapse
Yes - if you just boot recovery.img instead - then you get the recoverymenu with the option to do aNandroidbackup - pres backup and the backup begins and put it on the SD-card.
Don´t flash the recovery.img - only update the rom afterwards with the update.zip file.
Command from adb/PC:
adb reboot boot daldroid-recovery-new.img (or whatever name your recovery image has)

Joost39 said:
Yes - if you just boot recovery.img instead - then you get the recoverymenu with the option to do aNandroidbackup - pres backup and the backup begins and put it on the SD-card.
Don´t flash the recovery.img - only update the rom afterwards with the update.zip file.
Command from adb/PC:
adb reboot boot daldroid-recovery-new.img (or whatever name your recovery image has)
Click to expand...
Click to collapse
Thx, I fastboot boot daldroid-recovery-new.img and successful get into the recovery mode. At there, aNandroidbackup 2.1 is available for backup. I am successful to backup too. Am I now at a point that ready for rooting my HK version Magic with daldroid-htcmagic1-signed.zip rom?

Related

How I can do to dump NBH format HTC official sapphire rom?

Anyone have a idea?
liang said:
Anyone have a idea?
Click to expand...
Click to collapse
Would it be possible to root it and then do a Nandroid backup and give us the data, boot, system.img
Please somebody help this person! I am so desperate to have HTC original rom.
liang said:
Anyone have a idea?
Click to expand...
Click to collapse
Hello Liang.
I can tell you how to make Nandroid backup of your Magic/Sapphire. I am not sure what NBH backup means so maybe it's not what you want, but it is definitely what we want. Please could you do the Nandroid backup for us? We have a cut-down HTC Magic here in England, with no Exchange ActiveSync and we really want the full HTC Asia version of the software.
This will not modify your phone or software in any way. It will just do a one-time boot with the special nandroid recovery menu where a backup can be done. Afterwards everything is back to normal.
Here's how to do a Nandroid backup:
Firstly, download fastboot.exe, or if you are on Linux, just fastboot. You can get fastboot from HTC's website, here's the link:
http://www.htc.com/www/support/android/adp.html#s2
Save fastboot.exe in just c:\ (the root/beginning of your C: disk).
You need to make sure the USB drivers for the HTC Magic are installed on your computer.
Then you need to download this file, unzip it, and save it to your phone's sdcard:
http://www.droiddeveloper.com/hrbuilds/recovery-new.img.zip
You must unzip the file, so that you have "recovery-new.img" on the SDCard.
Then, please turn off your HTC Magic, and hold down the Back button (arrow button next to the Search button), whilst turning the phone on.
This will enter Fastboot mode, and the phone should show "SAPPHIRE xxxxx FASTBOOT USB" and some other information.
From your computer, go to a command prompt (Start -> Run -> cmd [enter]), or just Start -> cmd [enter] if on vista.
Type: cd \ (that's CD, space, backslash) then [enter]. This changes your working directory to the root of the c: drive, where we have saved fastboot.exe.
Then type "fastboot devices" and make sure that fastboot on the computer can see your phone. Hopefully it will return a model or serial number of the HTC handset.
If so, please type "fastboot boot recovery-new.img".
This will start your phone up with the modified recovery image, which has Nandroid backup built into it. You should now see the recovery screen on the phone, with some menu options, including "Nandroid Backup".
Please choose to do a Nandroid backup from the menu on the phone. This will create a folder on the phone's sd-card called Nandroid, with some other folders inside, with backups of the system.
You can then choose restart from the Recovery screen and everything will be back to normal.
Please can you do this and send us the files? From your perspective it would be better if you wiped the phone (Factory reset on the phone, Under Settings -> SD card & phone storage -> Factory data reset) before doing this because we don't want your data. Or you could just do it, zip up the files and contact me and I will take your files, restore here, wipe data, then re-zip the files, so nobody will have your information. If you are not happy with that, you could just send us all the files except data.img. I'm sure that would be OK.
I can create a private FTP server for you to upload to if you want, or you can use rapidshare or similar.
My email is : carl @ css-networks.com , or you can send me a message on this forum.
please do it
liang said:
Anyone have a idea?
Click to expand...
Click to collapse
please Liang , you can do it
do a Nandroid backup and give us the data, boot, system.img
Yes please Liang - you are the last option to get the real deal
yea, would be nice to have a dump of asian magic
Liang, anything ?
you're the unique person in the world who has this opportunity.
all people's waiting for you, you will become a big star !!!
YES YOU CAN
if he doesn't do it be patient.... if possible.... it is being release in most places in a couple of weeks at worst (Australia getting it on June 15- we are getting HTC version thru 3 and Voda version thru voda...).....I will have a crack at it as soon as i have it- i want it rooted straight away but would prefer to still have aussie/Asian version....
Any news Liang
Liang just wondering if you have managed to backup the rom
having a good exchange client is whats letting this device down right now
You dont must be a root to Backup the Htc with Nandroid
Follow this Steps to Backup your Htc:
1. Download my Backup.zip
1.1. Unzip the Folder on your Desktop
2. Install the USB Driver from Driver Folder
3. Turn off your Phone and press Power + Back
4. Open "Boot Modified Recovery.cmd"
5. and the Backup with Nandroid 2.1
6. Voila! Your Backup files are in sdcard/nandroid/
http://www.abload.de/img/pic32ae6.jpg
very easy i think
(sry for my english)
here is the Backup.zip
http://www.megaupload.com/?d=FV9TZA8S
Z3ko said:
You dont must be a root to Backup the Htc with Nandroid
Follow this Steps to Backup your Htc:
1. Download my Backup.zip
1.1. Unzip the Folder on your Desktop
2. Install the USB Driver from Driver Folder
3. Turn off your Phone and press Power + Back
4. Open "Boot Modified Recovery.cmd"
5. and the Backup with Nandroid 2.1
6. Voila! Your Backup files are in sdcard/nandroid/
http://www.abload.de/img/pic32ae6.jpg
very easy i think
(sry for my english)
here is the Backup.zip
http://www.megaupload.com/?d=FV9TZA8S
Click to expand...
Click to collapse
I don´t work on our bootloader 1.33.0009
once its backed up can you extract the exchange and document reader apps from it to load onto the Voda ROM?
Marko_1611 said:
Liang just wondering if you have managed to backup the rom
having a good exchange client is whats letting this device down right now
Click to expand...
Click to collapse
Try the Rogers from this forum. Exchange ActiveSync works extremely well, mail, calendar, contacts and folders.
Hi, I'm new to this forum and also a new owner of HTC Magic in HK.
I've tried cmf's instruction to fastboot with recovery-new.img. However, the screen seems just stay on the "HTC MAGIC" logo and looks like it's hanged... And I've no way to power it off except pulling the battery...
So is there any more thing I can do to help? As long as I don't need to flash until I can get a safe flash backup, I can still try them out (Well, I'm still afraid of bricking my first smartphone...)
yes, same here in HK HTC Magic, after sending the recovery-new.img, the phone is re-booting with hanged in HTC magic logo
SAPPHIRE PVT 32A SHIP S-ON H
HBBO-1.33 0009 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
May 8 2009,21:02:32
I found that it is possible to execute files inside the /sqlite_stmt_journals directory. So I'm thinking... If we can copy the su command to /sqlite_stmt_journals and execute it there, then we can gain root access?
But I don't know where to get su from... I can't find the file inside the phone...
Anybody can share some insight on this?
hkfriends said:
yes, same here in HK HTC Magic, after sending the recovery-new.img, the phone is re-booting with hanged in HTC magic logo
SAPPHIRE PVT 32A SHIP S-ON H
HBBO-1.33 0009 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
May 8 2009,21:02:32
Click to expand...
Click to collapse
We have the same specs. on the HTC Magic (nonbranded) here in Scandinavia..
tactmayers said:
I found that it is possible to execute files inside the /sqlite_stmt_journals directory. So I'm thinking... If we can copy the su command to /sqlite_stmt_journals and execute it there, then we can gain root access?
But I don't know where to get su from... I can't find the file inside the phone...
Anybody can share some insight on this?
Click to expand...
Click to collapse
You could try copying /bin/sh to su, if the phone is using something like busybox (a multi-call binary), then the one program acts differently if it's called a different name, if you see what I mean.
Really it would be good if somebody who understood the Android stuff, like Haykuro, could explain maybe why the recovery-new.img hangs, and how a working recovery-new.img should be made that can be started via fastboot.
Daldroid knows how....

[Request] somebody that can create update.zip for cwm

can someone create a update.zip for cwm with this old firmware v08 , i just badly need it , i have a prototype o3d and i updated it to v10d and after that my battery is always 0%.. the old firmware that is ok with my o3d is v08.
this is the link of the 1st rom that i need.
http://www.multiupload.com/UQPQO1SJ0S
i am hoping that someone can help. thanks
isaias19 said:
can someone create a update.zip for cwm with this old firmware v08 , i just badly need it , i have a prototype o3d and i updated it to v10d and after that my battery is always 0%.. the old firmware that is ok with my o3d is v08.
this is the link of the 1st rom that i need.
http://www.multiupload.com/UQPQO1SJ0S
i am hoping that someone can help. thanks
Click to expand...
Click to collapse
If that's the firmware you need, just download it and put in a zip file.
right click on the folder then add to archive. use the compression method store.
That should work but do a backup before hand just in case.
I tried to zip it and rename it to update.zip and install it via cwm recovery but the recovery said that it failed on signature.. Something.,,
isaias19 said:
I tried to zip it and rename it to update.zip and install it via cwm recovery but the recovery said that it failed on signature.. Something.,,
Click to expand...
Click to collapse
The file is already a zip file, it's just in the wrong compression method...
using winrar, open the zip file, then tools, then convert archive.
A box should appear, change the archive format to zip, and compression method to store.
Hi, isaias19, I also have a prototype o3d. I can not use it after rom(v10d, v10e) upgrade. If possible, could you post your v08 rom backup file using cmw?? Thanks.
@ modernbruce
we have the same problem , i did not backup my stock rom thats why iam searching for the v08 firmware. =C
Hi ,
For your case update.zip will not solve your problem.
you need dump your system and replace by another one:
To see your partition :
adb shell cat /proc/partitions
After try use these command to put your new system :
http://www.omappedia.org/wiki/Android_eMMC_Booting
++

Help with a chinese model phone, A101, deleted /system/bin/sh..

Hello all,
Firs I like to apologies if I've posted in the wrong section of the forum.
As the title says, I have a Iglo A101 with GingerBread 2.3.4 phone and I accidently deleted the system/bin/sh file.
I was searching for a2sd and I downloaded it, but when running it, instead of pressing 1 - "install a2sd" I pressed 2 "uninstall a2sd", by mistake, and by the time I realized the sh file was deleted. Now the phone is no longer rooted and can't be rooted and also my Wi-Fi doesn't work anymore.
I've search the net for answer but I can't find a solution to this type of phone.
Could someone help me fix this or at least get the Wi-Fi working again?
Thanks in advanced...
OK, I've manage to contact the retailer and he gave me what appears to be the all system files, as now I have a rar containg system.img userdata.img recovery.img etc etc. How do I install this files, because he doesn't appear to know either. I tried from the recovery mode using install update.zip from sdcard but it give's me invalid OTA package and I can't find an answer on how to flash a img file from recovery mode...
pitvenin said:
OK, I've manage to contact the retailer and he gave me what appears to be the all system files, as now I have a rar containg system.img userdata.img recovery.img etc etc. How do I install this files, because he doesn't appear to know either. I tried from the recovery mode using install update.zip from sdcard but it give's me invalid OTA package and I can't find an answer on how to flash a img file from recovery mode...
Click to expand...
Click to collapse
Does the device have fastboot? If so the files need to flashed using fastboot. The command is fastboot flash boot boot.img
Fastboot flash system system.img.
If your device does not have fastboot then you will need to extract the system.img and make a flashable .zip so you can flash through CWM or whatever your recovery is. If you are using stock recovery then I eexpect you will either need to find a solution or send it off for repair. I will have a look into helping you get your device back up and running but I cant promise to succeed. Give me a few days and I will report back with any solutions or info to get you on your way to fixing your device.
Regards
Blackwatch
Sent from my LT18i using xda premium
pitvenin said:
Hello all,
Firs I like to apologies if I've posted in the wrong section of the forum.
As the title says, I have a Iglo A101 with GingerBread 2.3.4 phone and I accidently deleted the system/bin/sh file.
I was searching for a2sd and I downloaded it, but when running it, instead of pressing 1 - "install a2sd" I pressed 2 "uninstall a2sd", by mistake, and by the time I realized the sh file was deleted. Now the phone is no longer rooted and can't be rooted and also my Wi-Fi doesn't work anymore.
I've search the net for answer but I can't find a solution to this type of phone.
Could someone help me fix this or at least get the Wi-Fi working again?
Thanks in advanced...
Click to expand...
Click to collapse
You have use flash tools to flash those files in your mobile.......upload your build.prop under /system/
I'll tell you more!!
Sent from my GT-I5801 using XDA
I have stock recovery 3e. I tried to make an update.zip but I keep getting invalid OTA Package..
Here is the build.prop, sorry for my late response
And here is the one that is on my phone, I've manage to get it using jota text editor. Some how that application can still see some system files, but it can't write..
pitvenin said:
I have stock recovery 3e. I tried to make an update.zip but I keep getting invalid OTA Package..
Here is the build.prop, sorry for my late response
Click to expand...
Click to collapse
Do you have an update.zip of complete ROM for you phone??
If so, then upload your recovery.img....i'll mod it & give you a modded recovery......
here it is
any luck?
pitvenin said:
any luck?
Click to expand...
Click to collapse
Trying....
hi
i had similar problem on this device a101 i did not delete any folder but by rooting the device my wifi and Bluetooth stoped working.i solved the problem by the factory menu.....have you tried it?
i did factory reset, but since there a system file missing it doesn't solve it..Can't there be a way to create an update.zip package with the sh file and then apply like an update from recovery? I've been trying to understand what does invalid OTA package mean, I think if that would be solved then I could easily put the file back...
i think you need spb launcher
i have to admit i used it only ones before for china 5388 there i needed com + usb cable here you need just a normal cable us the boot on this phone is different i have all you need give me email i will send to you. i have scater for a101 file too.i never used it but i have.Us i said my phone work ok after reset from factory mode
still nothing?
pitvenin said:
OK, I've manage to contact the retailer and he gave me what appears to be the all system files, as now I have a rar containg system.img userdata.img recovery.img etc etc. How do I install this files, because he doesn't appear to know either. I tried from the recovery mode using install update.zip from sdcard but it give's me invalid OTA package and I can't find an answer on how to flash a img file from recovery mode...
Click to expand...
Click to collapse
If you have the system.img image, you can try to flash it in the phone with SP Flash Tool,
Here is the tutorial:
bm-smartphone-reviews.blogspot.com/2011/10/mt65x3-flashing-tutorial.html
arcristi..all I can say is : THANK YOU!
I finally managed to get the system files back, I'm gonna hang on to this program just in case....Thanks again
A101 Android
Please, can you here to give all system files, which were sent to you from retailer? I have the same model. Thanks!

[Q] [ROM stock] I'm searching for Alcatel OT-4033D ROM

Hi,
As the title suggests I'm looking for the original firmware of the Alcatel OT 4033D because, after I bricked mine, I can't find a working ROM for my phone (I've tried various ROM for MT6572 processor and Android 4.2.2 but I don't read the SD card and the SIM (Although setting the correct IMEI))
If someone is own this device could make me a dump? I just need the file "system.img", the others I already have.
PS: It's okay if it's not the file .Img but the zip of the partition with the files contained in /system
Thanks in advance to who answers C:
RESOLVED
Full ROM dump (MTKtools): https://www.mediafire.com/?1q2k2ppl1qvhvqr
recovery.img CWM5: https://www.mediafire.com/?bg4rtah9tsbhszs
nandorid backup without data partition: https://www.mediafire.com/?kbenlbzd5qvi73k
n1osbb2 said:
Hi,
As the title suggests I'm looking for the original firmware of the Alcatel OT 4033D because, after I bricked mine, I can't find a working ROM for my phone (I've tried various ROM for MT6572 processor and Android 4.2.2 but I don't read the SD card and the SIM (Although setting the correct IMEI))
If someone is own this device could make me a dump? I just need the file "system.img", the others I already have.
PS: It's okay if it's not the file .Img but the zip of the partition with the files contained in /system
Thanks in advance to who answers C:
Click to expand...
Click to collapse
i need it too.. i had also bricked mine.
mixterz92 said:
i need it too.. i had also bricked mine.
Click to expand...
Click to collapse
Tomorow maybe I have the ROM dump from a phone of my friend.. I'll try to flash it. If it works I'll upload the ROM and I'll link you the file
( sorry for my bad english >_> )
n1osbb2 said:
Tomorow maybe I have the ROM dump from a phone of my friend.. I'll try to flash it. If it works I'll upload the ROM and I'll link you the file
( sorry for my bad english >_> )
Click to expand...
Click to collapse
okay
I also need it please. thanks in advance
Sorry
chryophobia said:
I also need it please. thanks in advance
Click to expand...
Click to collapse
My Alcatel is in assistance for a ROM reset.. When I'll have it again maybe I'll do a ROM dump and upload it..
So wait about 20 days.. I hope ( ****ing assistance >_> )
15-01-2014 and is still in assistance keep waiting..
I have a backup of my ROM
I made a backup of my phone, it's a 4033A, if it's useful for you, I can upload it.
Ty
giovann134 said:
I made a backup of my phone, it's a 4033A, if it's useful for you, I can upload it.
Click to expand...
Click to collapse
It could be a good idea, mabybe the software is the same..
I'm trying to backup mine new 4033D but I always get a error! How u done a backup? via MTK droid tools?
Hope u can understand, my english is so bad~
I made it with CMW
n1osbb2 said:
It could be a good idea, mabybe the software is the same..
I'm trying to backup mine new 4033D but I always get a error! How u done a backup? via MTK droid tools?
Hope u can understand, my english is so bad~
Click to expand...
Click to collapse
I installed CWM using MTK droid tools, then I made my backup. System is the same, difference is your phone is from Europe and mine from Latin America.
giovann134 said:
I installed CWM using MTK droid tools, then I made my backup. System is the same, difference is your phone is from Europe and mine from Latin America.
Click to expand...
Click to collapse
Can u tell me how did u installed CWM? I can't find the compatible image..
Or, if u want, can u upload it? So I'll do a backup and I'll upload it! TY
Edit:
I've installed CWM 5 ad I did a nandroid backup.. It's 1.6GB ( uncompressed ).. So, I'll begin to upload it 31 night (GMT+1) splitted in parts in MEGA or MediaFire.
If someone can test it is better, but it should work!
I made a backup!
n1osbb2 said:
Can u tell me how did u installed CWM? I can't find the compatible image..
Or, if u want, can u upload it? So I'll do a backup and I'll upload it! TY
Edit:
I've installed CWM 5 ad I did a nandroid backup.. It's 1.6GB ( uncompressed ).. So, I'll begin to upload it 31 night (GMT+1) splitted in parts in MEGA or MediaFire.
If someone can test it is better, but it should work!
Click to expand...
Click to collapse
I uploaded it: https://www.mediafire.com/?kbenlbzd5qvi73k
It's only ~200MB 'cause I removed the data partition and I high compress it in a .arc archive. If someone test it let me know if it work pls
n1osbb2 said:
I uploaded it: ...
It's only ~200MB 'cause I removed the data partition and I high compress it in a .arc archive. If someone test it let me know if it work pls
Click to expand...
Click to collapse
Thank you for that n1osbb2;51494733.
I also have a bricked one, it gets stuck at animation. I can boot into stock recovery.
Can someone tell me what I need to do to fix it?
Another idea is if we could change the firmware version number to something lower, then the Alacatel "Mobile Upgrade S" would be essentially forced to overwrite it. Right now it sees my phone's version as up to date and stops there.
So... Is it at all possible to alter the firware version number on the phone?
edit
n1osbb2, could you please take a backup with MTK Droid Root & Tools as well?
You can find it here under Android Software and Hacking General [Developers Only]
kyrastas1 said:
Thank you for that n1osbb2;51494733.
I also have a bricked one, it gets stuck at animation. I can boot into stock recovery.
Can someone tell me what I need to do to fix it?
Another idea is if we could change the firmware version number to something lower, then the Alacatel "Mobile Upgrade S" would be essentially forced to overwrite it. Right now it sees my phone's version as up to date and stops there.
So... Is it at all possible to alter the firware version number on the phone?
edit
n1osbb2, could you please take a backup with MTK Droid Root & Tools as well?
You can find it here under Android Software and Hacking General [Developers Only]
Click to expand...
Click to collapse
Hi, the backup by MTK droid tools fails everytime, I'm trying to debug the error.. If I have sucess I'll upload it.
BTW you can try another methods:
-Flash the CWM using MTK droid tools ( if you want the modified recovery,img I can upload it, or if u want MTK generates the img automatically: there is a guide on google; and then you can flash my backup without user data trought the CWM
If u want CWM make adb works, so you can do a backup of your firmware in order to can come back in the prevoiuos situation if it's needed
OR
-Using the latest version of SP flash tools, u can flash the system.img that u can find in my CWM backup. The latest version have no bugs with the generation of the scatter file, so it could work, but I'm not sure
Sorry for my bad english, I hope you understand..
Let me know if one of this methods works, thank you!
n1osbb2 said:
Hi, the backup by MTK droid tools fails everytime, I'm trying to debug the error.. If I have sucess I'll upload it.
BTW you can try another methods:
-Flash the CWM using MTK droid tools ( if you want the modified recovery,img I can upload it, or if u want MTK generates the img automatically: there is a guide on google; and then you can flash my backup without user data trought the CWM
If u want CWM make adb works, so you can do a backup of your firmware in order to can come back in the prevoiuos situation if it's needed
OR
-Using the latest version of SP flash tools, u can flash the system.img that u can find in my CWM backup. The latest version have no bugs with the generation of the scatter file, so it could work, but I'm not sure
Sorry for my bad english, I hope you understand..
Let me know if one of this methods works, thank you!
Click to expand...
Click to collapse
Thanks for the reply.
Is the modified recovery.img not the one included in the zip you uploaded?
Re the second option, there is no system.img inside - that's the reason I asked for a MTK Droid Root & Tools backup.
The contents of your zip are these:
Code:
.android_secure.vfat.tar
boot.img
cache.ext4.tar
recovery.img
system.ext4.tar
kyrastas1 said:
Thanks for the reply.
Is the modified recovery.img not the one included in the zip you uploaded?
Re the second option, there is no system.img inside - that's the reason I asked for a MTK Droid Root & Tools backup.
The contents of your zip are these:
Code:
.android_secure.vfat.tar
boot.img
cache.ext4.tar
recovery.img
system.ext4.tar
Click to expand...
Click to collapse
I confused the system.ext4.tar with the system.ext4.img
So, I have done half MTK droid backup (it stops when it give me the error, so is not thecomplete backup, but the system.img os ok..) and there is the system image file.. I can upload it 5-04 night (GMT+1) or maybe this night. I'll post the link when it's uploaded.
The firmware of the 4033D have the custpack partiotion too, adn I don't know if it's needed too, so if the flash of system.img fails I'll upload the custpack too
The recovery with CWM is here: https://www.mediafire.com/?bg4rtah9tsbhszs
EDIT: I done a full backup with MTK adn I prepared files for flash tool. I compressed it all in ~460MB archive, t should contain everything. The upload time is the same!
EDIT2 4-3-14 0051 gmt+1: I'm uploading it on Mediafire! It's a high compressed arc archive, so it can drop the pc perfomance while extracting, so have patience
With my connection it wants a lot of time, it say ~8hrs
link rom: https://www.mediafire.com/?1q2k2ppl1qvhvqr
n1osbb2 said:
I confused the system.ext4.tar with the system.ext4.img
So, I have done half MTK droid backup (it stops when it give me the error, so is not thecomplete backup, but the system.img os ok..) and there is the system image file.. I can upload it 5-04 night (GMT+1) or maybe this night. I'll post the link when it's uploaded.
The firmware of the 4033D have the custpack partiotion too, adn I don't know if it's needed too, so if the flash of system.img fails I'll upload the custpack too
The recovery with CWM is here: ...
EDIT: I done a full backup with MTK adn I prepared files for flash tool. I compressed it all in ~460MB archive, t should contain everything. The upload time is the same!
EDIT2 4-3-14 0051 gmt+1: I'm uploading it on Mediafire! It's a high compressed arc archive, so it can drop the pc perfomance while extracting, so have patience
With my connection it wants a lot of time, it say ~8hrs
link rom: ...
Click to expand...
Click to collapse
You aced it! A million thanks!
kyrastas1 said:
You aced it! A million thanks!
Click to expand...
Click to collapse
Of nothing :laugh:
Let me know if it works or if u have troubles with it, TY :good:
Alcatel 4033d Bricked
kyrastas1 said:
Thanks for the reply.
Is the modified recovery.img not the one included in the zip you uploaded?
Re the second option, there is no system.img inside - that's the reason I asked for a MTK Droid Root & Tools backup.
The contents of your zip are these:
Code:
.android_secure.vfat.tar
boot.img
cache.ext4.tar
recovery.img
system.ext4.tar
Click to expand...
Click to collapse
Ive Brick My alcatel 4033d And I Need To Flash It ..Need Help On Doing So .. the phone is not turning on Just show charging light only ..Helllllllllllllp plz
---------- Post added at 01:51 PM ---------- Previous post was at 01:37 PM ----------
n1osbb2 said:
Can u tell me how did u installed CWM? I can't find the compatible image..
Or, if u want, can u upload it? So I'll do a backup and I'll upload it! TY
Edit:
I've installed CWM 5 ad I did a nandroid backup.. It's 1.6GB ( uncompressed ).. So, I'll begin to upload it 31 night (GMT+1) splitted in parts in MEGA or MediaFire.
If someone can test it is better, but it should work!
Click to expand...
Click to collapse
Ive Brick My alcatel 4033d And I Need To Flash It ..Need Help On Doing So .. the phone is not turning on Just show charging light only ..Helllllllllllllp plz
Alecupid said:
Ive Brick My alcatel 4033d And I Need To Flash It ..Need Help On Doing So .. the phone is not turning on Just show charging light only ..Helllllllllllllp plz
Click to expand...
Click to collapse
Full ROM dump (MTKtools): https://www.mediafire.com/?1q2k2ppl1qvhvqr
recovery.img CWM5: https://www.mediafire.com/?bg4rtah9tsbhszs
Nandorid backup without data partition: https://www.mediafire.com/?kbenlbzd5qvi73k
download the mtktools backup ( cause u bricked, so u don't have the CWM, right? ), u have to flash it trough SPflashTools ( http://forum.xda-developers.com/showthread.php?t=1982587 )
PS: use it on your own risks!
n1osbb2 said:
Full ROM dump (MTKtools): https://www.mediafire.com/?1q2k2ppl1qvhvqr
recovery.img CWM5: https://www.mediafire.com/?bg4rtah9tsbhszs
Nandorid backup without data partition: https://www.mediafire.com/?kbenlbzd5qvi73k
download the mtktools backup ( cause u bricked, so u don't have the CWM, right? ), u have to flash it trough SPflashTools ( http://forum.xda-developers.com/showthread.php?t=1982587 )
PS: use it on your own risks!
Click to expand...
Click to collapse
excuse me, im new here this is my first time on this device so totally empty, can you please make an idiots guide on how to get on with this, i have the same problem here stuck at boot screen. i really appreciate it.

[Q] Please help me step by step for a custom ROM?

Hi guys,
I really need help on this, and i am hoping very much someone can be patient with me as i try to install a custom ROM on my HTC Desire S.
The BIGGEST problem i am facing is getting command text correct in the command window, i am using Windows 7 home premium on a laptop, the previous posts i read and followed were all saying put this in the command and put that in the command but none of them were correct and my computer kept saying wrong!
I am currently at the stage where i have visited HTC Dev and i have sucessfully gone through the procedure for unlocking the bootloader, i found this difficult to do, command prompts they gave were wrong i had to change paths, and i was missing certain .dll files on my computer too, which HTC did not mention i would need, but here i am after days of messing about and trying all sorts of commands, with a unlocked bootloader, with S-ON and running a Vodafone stock rom of Gingerbread Android version 2.5.3.
My phone is Vodafone branded i wish to remove all of their branding and apps, and install a plain unbranded ROM.
However, i need step by step instruction, i can not do this from threads that say "follow this here (link to another thread) which then links to another and another, i ended up with i think 15 tabs in the browser open, with conflicting advice, conflicting information, mistakes, and a whole lot of jargon that i did not understand, so what i really am hoping for is firstly links to all the software or downloads that i will need first, direct link to the rom, the backup, and anything else, if anyone needs info from my phone to pinpoint a specific rom i am happy to give it, i do not mind another HTC rom as long as its plain with no carrier apps or branding on it, then once i have got all the downloads sorted out i can start from there.
Please help me out i have been at this for days and getting nothing except confused.
Many thanks! :good:
3324536
I have found this quite up to date guide which is very easy to follow, are the rom and all the downloads OK for a UK phone?
I have hboot 200. 0002 as well as S-ON so i believe its the same, i can follow this one quite easy is it ok to do??
Also, while flashing this rom and recovery image, should i have SDK tools open on my computer??
And another thing, i noticed while extracting the recovery image that it just says recovery, should i rename it to recovery.img or leave it as it is? Because the command prompts are saying "recovery.img" and not just "recovery"?????
Thanks.
http://forum.xda-developers.com/showthread.php?t=1525100
mickmick72 said:
I have found this quite up to date guide which is very easy to follow, are the rom and all the downloads OK for a UK phone?
I have hboot 200. 0002 as well as S-ON so i believe its the same, i can follow this one quite easy is it ok to do??
Also, while flashing this rom and recovery image, should i have SDK tools open on my computer??
And another thing, i noticed while extracting the recovery image that it just says recovery, should i rename it to recovery.img or leave it as it is? Because the command prompts are saying "recovery.img" and not just "recovery"?????
Thanks.
http://forum.xda-developers.com/showthread.php?t=1525100
Click to expand...
Click to collapse
First you need to get in Folder Options in your WIN 7 Control Panel.There's option in View tab called " Hide extension for known file types". Uncheck that option and click ok.Then you will see extensions for all files on you win 7.This will show you extension of recovery.Should be .img.
Then you can follow that guide.I used the same one.
You need to get newest recovery.There are TWRP and 4ext for HTC Desire S.They are up to date.Do a little search and read posts and info.
Check post about panels (Hitachi or Sony)http://forum.xda-developers.com/showthread.php?t=1943524.Again search for that in HTC Desire S forum here.When you check all of that you can try any custom ROM but always backup nandroid.
Little hint : If you want to start CMD window in any folder first open that folder hold SHIFT and right click on empty space.You will get command there named Open command window here.Click on that and you can work.
GL.If you need more help ask here again.
SKENER said:
First you need to get in Folder Options in your WIN 7 Control Panel.There's option in View tab called " Hide extension for known file types". Uncheck that option and click ok.Then you will see extensions for all files on you win 7.This will show you extension of recovery.Should be .img.
Then you can follow that guide.I used the same one.
You need to get newest recovery.There are TWRP and 4ext for HTC Desire S.They are up to date.Do a little search and read posts and info.
Check post about panels (Hitachi or Sony)http://forum.xda-developers.com/showthread.php?t=1943524.Again search for that in HTC Desire S forum here.When you check all of that you can try any custom ROM but always backup nandroid.
Little hint : If you want to start CMD window in any folder first open that folder hold SHIFT and right click on empty space.You will get command there named Open command window here.Click on that and you can work.
GL.If you need more help ask here again.
Click to expand...
Click to collapse
Thanks mate, i will do what you advise, good trick about opening command in a folder
I will ask if i get any questions then cheers
OK i have a question straight away, it says in the tutorial:
Copy the rom onto the SD card, then it says copy the boot.img onto the android C folder - SO -
Do i first extract the boot.img and copy it to the C android folder AND copy the same boot.img onto my SD card, as well as the meta info and other stuff?
OR do i copy the boot.img onto the C drive only, and copy everything else onto the SD card?
A little confused here on what to do.
Thanks for any help.
Copy the rom onto the SD card, then it says copy the boot.img onto the android C folder
Click to expand...
Click to collapse
You do exactly that. You place the rom into the sd card, and you copy the boot.img into the said folder.
This is because you are "unlock s-on", the recovery isn't able to flash the boot.img, so you have to do it manually.
Remember, even after you flash the rom, if you did not flash the boot.img the phone will NOT fully boot.
*also, the guide says to turn the phone off after flashing the rom and boot into the bootloader. I dont think this is necessary, you can just reboot the phone into bootloader from the recovery itself.
98623459
#Fear said:
You do exactly that. You place the rom into the sd card, and you copy the boot.img into the said folder.
This is because you are "unlock s-on", the recovery isn't able to flash the boot.img, so you have to do it manually.
Remember, even after you flash the rom, if you did not flash the boot.img the phone will NOT fully boot.
*also, the guide says to turn the phone off after flashing the rom and boot into the bootloader. I dont think this is necessary, you can just reboot the phone into bootloader from the recovery itself.
Click to expand...
Click to collapse
So, just to clarify, i copy the whole .zip onto the SD card (including boot.img) and then re copy the boot.img into my Android folder on the computer (i will then have boot.img on BOTH the SD card and the C Android folder, this is where i am getting confused, i intend to start flashing today sometime.
OK i am going to flash Reaper V.4 rom and 4EXT as recovery, if anyone has better suggestions on a safe rom please let me know i will flash that instead.
Thanks.
mickmick72 said:
So, just to clarify, i copy the whole .zip onto the SD card (including boot.img) and then re copy the boot.img into my Android folder on the computer (i will then have boot.img on BOTH the SD card and the C Android folder, this is where i am getting confused, i intend to start flashing today sometime.
OK i am going to flash Reaper V.4 rom and 4EXT as recovery, if anyone has better suggestions on a safe rom please let me know i will flash that instead.
Thanks.
Click to expand...
Click to collapse
You can try other roms when you try that.There's a lot of nice and smooth editions. First try reaper you have it now.
With S-ON you have to flash boot.img in fastboot after you install rom from recovery.That's why you need to copy it in android-tools folder.Whole zip goes on sd and you backup old rom from recovery, wipe everything except sd (wipe is recommended) and then install from zip in recovery.After that reboot in bootloader then flash boot.img from fastboot.Reboot and wait.Should be in in few min.No more then 10.Follow the guide.
GL
4325422
SKENER said:
You can try other roms when you try that.There's a lot of nice and smooth editions. First try reaper you have it now.
With S-ON you have to flash boot.img in fastboot after you install rom from recovery.That's why you need to copy it in android-tools folder.Whole zip goes on sd and you backup old rom from recovery, wipe everything except sd (wipe is recommended) and then install from zip in recovery.After that reboot in bootloader then flash boot.img from fastboot.Reboot and wait.Should be in in few min.No more then 10.Follow the guide.
GL
Click to expand...
Click to collapse
Any idea what i am doing wrong here? I do have recovery.img in my Android folder, but its not in the android tools folder, should i be putting it in the adt bundle folder rather than leaving it outside of it?
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\Michael>cd \Android
C:\Android>fastboot flash recovery recovery.img
error: cannot load 'recovery.img'
C:\Android>
Yes put the recovery.img inside the fastboot/adb folder
jmcclue said:
Yes put the recovery.img inside the fastboot/adb folder
Click to expand...
Click to collapse
OK going to try again, thanks!
Success!! And all the crap vodafone apps and branding have gone! I did run into problems but i sorted it out. Thanks very much for all the help here i will be installing new roms all the time
On this reaper rom, there is no app for google play store, would anyone know how to install it? Or how do i get to play store from this rom?
And no options for fastboot that i can see, so i may have a few problems installing other roms
Where can i see a list of all the roms i can download for the Desire S??
Thanks!!
mickmick72 said:
Success!! And all the crap vodafone apps and branding have gone! I did run into problems but i sorted it out. Thanks very much for all the help here i will be installing new roms all the time
On this reaper rom, there is no app for google play store, would anyone know how to install it? Or how do i get to play store from this rom?
And no options for fastboot that i can see, so i may have a few problems installing other roms
Where can i see a list of all the roms i can download for the Desire S??
Thanks!!
Click to expand...
Click to collapse
Flash gapps (google apps) in recovery and for everything else ul find below
http://forum.xda-developers.com/showthread.php?t=1146601
jmcclue said:
Flash gapps (google apps) in recovery and for everything else ul find below
http://forum.xda-developers.com/showthread.php?t=1146601
Click to expand...
Click to collapse
jmcclue means you need to download gapps for your android.That will be in zip and you install it through recovery just like rom.Most of custom rom require that step.Copy zip on SD,boot in recovery and flash from zip.Reboot and you will get google apps.
This guide is for HTC Desire S and you can find most of things you need but for roms follow Android Development in HTC Desire S on XDA.
GL
mickmick72 said:
And no options for fastboot that i can see, so i may have a few problems installing other roms
Click to expand...
Click to collapse
fastboot is controlled by the bootloader, the rom can't affect it in any way. The option "fast boot" in HTC Sense roms is something else, that sort of hibernates the phone instead of powering off, so the phone "boots fast".
Thanks guys i will go aheah and do these
SKENER said:
This guide is for HTC Desire S and you can find most of things you need but for roms follow Android Development in HTC Desire S on XDA.
GL
Click to expand...
Click to collapse
That link i posted also has all the roms in it

Categories

Resources