Database Info

[Q] Cant flash radio?

Ok I hear that I shouldnt flash the radio through CWM.
So i tried to do it through the computer and whenever I run the adb terminal it says it cant find the file.
I went back and looked and im supposed to stick the file in a platform tools folder but i dont have that.
i tried creating one and that didnt work.
Help???

Here you go buddy.
You need a flashable version of the radios. Here's where you cab get them.
http://forum.xda-developers.com/showthread.php?t=1178143
Sent from my HTC Sensation XE with Beats Audio using XDA App

Boot into "Bootloader" mode and it wil scan the SD-card for updates and ask to install.
It's really simple ;-)

kooskoos1814 said:
Boot into "Bootloader" mode and it wil scan the SD-card for updates and ask to install.
It's really simple ;-)
Click to expand...
Click to collapse
Only if it's a PG58IMG.ZIP. Make sure it's on the root of the SDCard, copy it there by any mechanism you like, e.g. mount phone as USB storage and use Windows Explorer.
If it's a .img file it needs to be flashed by ADB.
fastboot flash radio xxxx.img
Put the .IMG file in the same directory as fastboot.. In my case this is: "C:\android-sdk\tools".

I look for PG88IMG

Hello look for a link works for PG88IMG_based_on_RUU_Saga_HTC_Europe_1.28.401.1.zi p
Anyone can help me.
i find this but link not work
loveboatcaptain said:
and here it is...
based on the RUU_Saga_HTC_Europe_1.28.401.1_Radio_20.28b.30.080 5U_38.03.02.11_M_release
downloadlink: PG88IMG_based_on_RUU_Saga_HTC_Europe_1.28.401.1.zip
just rename it to "RG88IMG.zip" and put it on the root of your sd card.
then reboot into fastboot mode (bootloader) and the rest will be done automaticly.
you can extract that zip file to modify the system image to get root e.g.
search the forums to get it out how.
kind regards
Click to expand...
Click to collapse

Maybe try this. Not sure if it'll work
http://forum.xda-developers.com/showthread.php?t=1488672
Just scroll down a bit
Edit: forget to mention, maybe your zip-file already contains the pg88.. Thing you need
Sent from my Desire S using XDA App

Thanks for the reply but that's only radio and I need ROM a full install from sdcard And also does not need to do s-off

OP says you need pg88img.
That's not a ROM
Which ROM do you need? didn't searching the forum solve you're problem?
You have to state clearly what you want or need
Edit: Maybe that's what you need
http://forum.xda-developers.com/showthread.php?t=1002506
Sent from my Desire S using XDA App

Whatever may be the reason that you need this (?) here is how to get it yourself:
Download RUU_Saga_HTC_Europe_1.28.401.1_Radio_20.28b.30.080 5U_38.03.02.11_M_release from the sticky Stock ROMs thread.
Run the RUU on your PC.
On the first screen (do not press anything when it starts) open your Windows Explorer, browse to the C: drive and in the search field type rom.zip.
Wait for the search to complete and copy the rom.zip file to another loacation.
Close the RUU setup.
Rename the rom.zip (this is exactly what are you looking for) to PG88IMG.zip and copy to SDCard.

Yeah you are thinking about the rom.zip of the RUU which is renamed to that. So follow what amidabuddha said!

Thank you very much this is exactly what i look for.
thanks for all

[Q] Remove root and tampered banner to return

I'd like to remove root and go back to stock. I have a rogers one x and I've tried using the rogers RUU PJ83IMG.... to flash back to stock, but I can't use fastboot since my phone is bootloader locked, and I can't run the RUU because it is a .zip file and not a .exe. Renaming it to an .exe and running it does nothing.
Any help is appreciated!

Try un-zipping the file and run the exe in the folder created. Also, since we do not have s-off yet, we are able to remove tampered banner, but it will say re-locked. No estimated arrival of s-off at this point.
Sent from my HTC One X using XDA

shortyboy said:
Try un-zipping the file and run the exe in the folder created.
Click to expand...
Click to collapse
This. The RUU file is not meant to be run as-is. Unzip the contents onto your PC (such as into a folder on your PC desktop), then run the .exe that is inside the extracted contents.
And where did you get the idea of changing the extension from .zip to .exe? That's probably a bad idea in almost all circumstances. You can't just change the type of file by renaming it.
shortyboy said:
Also, since we do not have s-off yet, we are able to remove tampered banner, but it will say re-locked. No estimated arrival of s-off at this point.
Click to expand...
Click to collapse
The "tampered" flag will be removed after RUU. Tampered flag is for root, not BL unlock. And the OP said he is still BL locked.

redpoint73 said:
This. The RUU file is not meant to be run as-is. Unzip the contents onto your PC (such as into a folder on your PC desktop), then run the .exe that is inside the extracted contents.
And where did you get the idea of changing the extension from .zip to .exe? That's probably a bad idea in almost all circumstances. You can't just change the type of file by renaming it.
The "tampered" flag will be removed after RUU. Tampered flag is for root, not BL unlock. And the OP said he is still BL locked.
Click to expand...
Click to collapse
Thanks for your replies. Unfortunately there is no .exe in the RUU. I have googled extensively but cannot find one with an executable. Would either of you be able to link me? I need Rogers 1.73. Thanks for your help
Edit: I discovered this and tried it: http://forum.xda-developers.com/showthread.php?t=1658929 however i get an IMAGE UPDATING ERROR: This ROm update utility cannot update your device.

if you go to setting about/software information what does it say under software version?
also if your bootloader is unlocked relock it in fastboot with the command "fastboot oem lock"

gunnyman said:
if you go to setting about/software information what does it say under software version?
also if your bootloader is unlocked relock it in fastboot with the command "fastboot oem lock"
Click to expand...
Click to collapse
Software version 1.73.631.1
Just to clarify, I have not unlocked my phone, only root.

toastyy said:
Software version 1.73.631.1
Just to clarify, I have not unlocked my phone, only root.
Click to expand...
Click to collapse
when you flashed it did you get an error 155 or an error 140?
also THIS is the RUU you need http://www.filefactory.com/file/9qe....09.06_10.81.32.14L_release_254934_signed.zip

And you didn't mess with the CID ever? If not, I don't see any reason why the correct (Rogers) RUU would not work. Make sure HTC Sync is installed (maybe re-install, just to be safe), reboot the computer and try again. Perhaps try to download the RUU again, just to make sure the download isn't corrupt.

redpoint73 said:
And you didn't mess with the CID ever? If not, I don't see any reason why the correct (Rogers) RUU would not work. Make sure HTC Sync is installed (maybe re-install, just to be safe), reboot the computer and try again. Perhaps try to download the RUU again, just to make sure the download isn't corrupt.
Click to expand...
Click to collapse
Ohh, you're right! I changed the Cid to 1111111.. For supercid. How do I change that back?
As for the ruu, I can't run them because I have no exercise file to run. Changing the zip to an exercise gives me an error about my computer not being able to run it. I will download the above ruu and try it when I get home in an hr.
Thanks for your help!

You should be able to run the Rogers RUU with SuperCID. That's what SuperCID is, it lets you install firmware regardless of the CID that its intended for.
Not sure how to change the CID back to Rogers. Look on the SuperCID thread (not the one-click method, but the original "longer" method) and see if there is discussion on changing it back.
And to reiterate, you can't magically change a file from one type to another, just by changing the file extension from .zip to .exe. The RUU package should have ARUWIzard.exe inside once you unzip it. Are you sure you are unzipping it properly?

redpoint73 said:
You should be able to run the Rogers RUU with SuperCID. That's what SuperCID is, it lets you install firmware regardless of the CID that its intended for.
Not sure how to change the CID back to Rogers. Look on the SuperCID thread (not the one-click method, but the original "longer" method) and see if there is discussion on changing it back.
And to reiterate, you can't magically change a file from one type to another, just by changing the file extension from .zip to .exe. The RUU package should have ARUWIzard.exe inside once you unzip it. Are you sure you are unzipping it properly?
Click to expand...
Click to collapse
The problem is the rogers file isn't an EXE it's a zip file. There's a post somewhere around here explainng how to install it.

gunnyman said:
The problem is the rogers file isn't an EXE it's a zip file. There's a post somewhere around here explainng how to install it.
Click to expand...
Click to collapse
Ahh, I see the problem. The Rogers files is not a true RUU package, just the zip file usually contained in the "larger" RUU zip file. Is that right? The OP still can't change the file extension to .exe and make it run that way. Sounds like from the thread the OP linked in post 4 above, he needs to have a folder with the "other" RUU contents (including ARUWizard.exe), drop the file you linked (from Filefactory), then run the ARUWizard. Its not completely clear, but this seems to be the way?

He could also I thing just put that pdimg. Zip file on the SD card and boots into recovery and it should flash right?

gunnyman said:
He could also I thing just put that pdimg. Zip file on the SD card and boots into recovery and it should flash right?
Click to expand...
Click to collapse
Not sure. I've never in my life flashed anything from stock recovery
But it seems logical. I think normally the ARUWizard says its pushing the file to the phone, so it would make sense it just flashes from stock recovery.

I understand that I can't change the filetype like that . I just saw peterhtc mention having to do that in another thread. I am sure i have unzipped it properly. I'll try again with the other ruu linked above.

toastyy said:
I understand that I can't change the filetype like that . I just saw peterhtc mention having to do that in another thread. I am sure i have unzipped it properly. I'll try again with the other ruu linked above.
Click to expand...
Click to collapse
if you unzip it and see a zip file that starts with pd and some number I THINK it's 83 put that file on the root of your SD card space and reboot to bootloader. Then choose recovery. If all goes well it will detect that file and allow you to flash it. It should work fine because it's a signed zip from HTC.
---------- Post added at 03:59 PM ---------- Previous post was at 03:54 PM ----------
I just realized we're helping you return the most awesome phone in the world ™
Jumping ship?

gunnyman said:
if you unzip it and see a zip file that starts with pd and some number I THINK it's 83 put that file on the root of your SD card space and reboot to bootloader. Then choose recovery. If all goes well it will detect that file and allow you to flash it. It should work fine because it's a signed zip from HTC.
---------- Post added at 03:59 PM ---------- Previous post was at 03:54 PM ----------
I just realized we're helping you return the most awesome phone in the world ™
Jumping ship?
Click to expand...
Click to collapse
Haha well no not exactly. I have been dealing with rogers for 2 months trying to return the phone I bought outright in order to get a new one on a plan. I originally wanted to see how the SG3 was so I could still return the onex in time to pick that up, but I think i'll be sticking with the HTC (the sg3 is SO ugly). I assure you I am not jumping ship

gunnyman said:
He could also I thing just put that pdimg. Zip file on the SD card and boots into recovery and it should flash right?
Click to expand...
Click to collapse
So I tried to place the full zip file onto the phone in the main directory, both as the full file name and then just as the P83..etc name, rebooted into recovery, but I just got a pic of the phone with a red triangle+ exclamation mark. Currently I am extracting the whole zip onto the main directory and will try flashing recovery like this. Is that safe? I assume the phone will be able to tell which .img it needs. There is no file that begins with P83 in the actual zip

toastyy said:
So I tried to place the full zip file onto the phone in the main directory, both as the full file name and then just as the P83..etc name, rebooted into recovery, but I just got a pic of the phone with a red triangle+ exclamation mark. Currently I am extracting the whole zip onto the main directory and will try flashing recovery like this. Is that safe? I assume the phone will be able to tell which .img it needs. There is no file that begins with P83 in the actual zip
Click to expand...
Click to collapse
I'm curious about the contents of that zip I'll download it and check it out.
holy crap file factory is slow.

gunnyman said:
I'm curious about the contents of that zip I'll download it and check it out.
Click to expand...
Click to collapse
The download is quite slow - here are the contents
http://puu.sh/BU6B

[Q] Some questions regarding the Recovery step on the Tutorial

hey there, have some questions regarding Step 2 Recovery from this thread: http://forum.xda-developers.com/showthread.php?t=1583427
for some reason, it won't let me post as i have less than 10 posts.
so, going straight to the questions:
1) i downloaded SDK, now, do i have to install it? i actually installed it without knowing if i should or shouldn't and have no idea what to do with it.
2) was i supposed to extract the the Official CWM of koush? downloaded this one rather than Paul's interim but i didn't know what to do with it, so i just extracted into C:\fastboot
3) when he says "Place the CWM File where the fastboot.exe is (Downloaded with the SDK)" does he mean place the extracted bits with the installed SDK program into C:\fastboot? or does he mean leave the installer as is with the zip file as is in c:\fastboot? or a different combination altogether?
4) what is the name of the recovery in "fastboot flash recovery name_of_the_recovery.img"? i looked around and they said do recovery recovery, but that didn't work for me (couldn't find file error).
5) i have s4, is it wiser to go with the interim or official?
please feel free to ask if any of these questions are a bit confusing; tried my best to ask what i'm confused about. thanks for reading, and i'll greatly appreciate any help!

won1992 said:
hey there, have some questions regarding Step 2 Recovery from this thread: http://forum.xda-developers.com/showthread.php?t=1583427
for some reason, it won't let me post as i have less than 10 posts.
so, going straight to the questions:
1) i downloaded SDK, now, do i have to install it? i actually installed it without knowing if i should or shouldn't and have no idea what to do with it.
2) was i supposed to extract the the Official CWM of koush? downloaded this one rather than Paul's interim but i didn't know what to do with it, so i just extracted into C:\fastboot
3) when he says "Place the CWM File where the fastboot.exe is (Downloaded with the SDK)" does he mean place the extracted bits with the installed SDK program into C:\fastboot? or does he mean leave the installer as is with the zip file as is in c:\fastboot? or a different combination altogether?
4) what is the name of the recovery in "fastboot flash recovery name_of_the_recovery.img"? i looked around and they said do recovery recovery, but that didn't work for me (couldn't find file error).
5) i have s4, is it wiser to go with the interim or official?
please feel free to ask if any of these questions are a bit confusing; tried my best to ask what i'm confused about. thanks for reading, and i'll greatly appreciate any help!
Click to expand...
Click to collapse
Use this proccess http://forum.xda-developers.com/showthread.php?t=1604677 much easier and no need for sdk

LG Aristo 3 X220MA Root Search

So I just got the Aristo 3 and wanted to root it. after an extensive search I have come up empty. Does anyone know if there is a method available to use yet or maybe something is in the works? I've unlocked flashing but I cant seem to boot recovery. Any help would be greatly appreciated.

Same ive spent about 6 hours researching this ive never built my own root before however i just dont have the time to do whats needed. From what i researched get the original boot rom from lg bridge and perform a restore to download the factory boot image then use magisk to rebuild the image

Nvitethedark said:
Same ive spent about 6 hours researching this ive never built my own root before however i just dont have the time to do whats needed. From what i researched get the original boot rom from lg bridge and perform a restore to download the factory boot image then use magisk to rebuild the image
Click to expand...
Click to collapse
Hmm I'll give it a try. The phone is still new enough that I don't have much saved to it and if I brick it can take it back

should be able to just get the boot image may be the aristo 2 dev would pick this up since he's familiar with it I see you have a few posts in that forum maybe you can send that dev a message see if they would pick it up.

I eagerly await any progress in this run! My girlfriend cracked her screen on her Aristo 2 and decided that it was time to upgrade. I've never been disappointed in the idea of upgrading my phone...until it meant giving up my Aristoboy Mk.2(which was/is quite formidable)and rooted status along with it. If there is anything I might read about the process online, I would at very least consider the task myself. I am learning, but I have some decent skills and experience behind me. Please let me know if I can assist in any way. If not, I hope to see the first strides towards tackling this latest addition to the Aristo line!
My thanks to all my fellow devs here! You each make up a piece of the whole collection that make this, hands down the best forum/online community available the world over! Keep it up! We are making a difference in so many lives!
Your friend,
~[ProTech]~

So I've been busy as **** lately, but I found that the issue seems to be with the os more than the phone itself. I'm not that proficient with downgrading the os to a earlier version since this phone came stock with Oreo. I will try and talk to some of the devs who did the aristo 2 x210ma. Hopefully they have a solution. I've been using my 2 instead. I never realized how much you can't do with a stock phone and os.

OK here's something you can try...
first get dev-patched LGup {GooGle It}
then use the Dump function of Lgup to dump All partitions from your fone...
look for boot_COM{some#here} and rename it to boot.img
put that file on your fones sdcard and install magisk manager app.
use magisk manager app to patch that boot.img file.
find the new file patched_boot.img whereever magisk put it on your sdcard...
move it to your desktop or a folder etc. on P.C
now try to flash it to your fone...
Code:
adb reboot bootloader
Code:
fastboot oem unlock
if that works your bootloader is now unlocked you'll have to reboot the fone once as it'll erase cache and data...
after that
again do
Code:
adb reboot bootloader
now try
Code:
fastboot flash boot patched_boot.img
if that works....
Code:
fastboot reboot
and you'll have root by magisk.
if fastboot's not working other option is to rename "patched_boot.img" to "boot.img"
and then use Partitions DL option in lgup to flash the "patched"boot.img to the phone...
if that works you'll have root by magisk...
If this helped you feel free to hit thanks and come back to post the results plz.
Thanks

LgPWN'd said:
OK here's something you can try...
first get dev-patched LGup {GooGle It}
then use the Dump function of Lgup to dump All partitions from your fone...
look for boot_COM{some#here} and rename it to boot.img
put that file on your fones sdcard and install magisk manager app.
use magisk manager app to patch that boot.img file.
find the new file patched_boot.img whereever magisk put it on your sdcard...
move it to your desktop or a folder etc. on P.C
now try to flash it to your fone...
Code:
adb reboot bootloader
Code:
fastboot oem unlock
if that works your bootloader is now unlocked you'll have to reboot the fone once as it'll erase cache and data...
after that
again do
Code:
adb reboot bootloader
now try
Code:
fastboot flash boot patched_boot.img
if that works....
Code:
fastboot reboot
and you'll have root by magisk.
if fastboot's not working other option is to rename "patched_boot.img" to "boot.img"
and then use Partitions DL option in lgup to flash the "patched"boot.img to the phone...
if that works you'll have root by magisk...
If this helped you feel free to hit thanks and come back to post the results plz.
Thanks
Click to expand...
Click to collapse
My bootloader is already unlocked I've just not been able to flash anything with fastboot. So I have LGup, is there a difference with the dev patched one? I also have magisk on my phone, but it really doesn't give me any options besides to install a new version. I'm gonna go try your suggestion soon though...it sounds promising...and may open up other options if this doesn't succeed. Thanks I'll keep you posted.

Reckless459 said:
My bootloader is already unlocked I've just not been able to flash anything with fastboot. So I have LGup, is there a difference with the dev patched one? I also have magisk on my phone, but it really doesn't give me any options besides to install a new version. I'm gonna go try your suggestion soon though...it sounds promising...and may open up other options if this doesn't succeed. Thanks I'll keep you posted.
Click to expand...
Click to collapse
PLease let us know how it go's...
I'm trying to port and compile Multi-rom for LG-aristo Lg-m210 at the moment...
So I have LGup, is there a difference with the dev patched one?
.
Click to expand...
Click to collapse
in answer to that YES quite a difference...
devpatched lgup gives you extra options such as Dump and Partitions-DL and Chiperase among others...
you'll NEED that dump and partitions-DL option....

LgPWN'd said:
PLease let us know how it go's...
I'm trying to port and compile Multi-rom for LG-aristo Lg-m210 at the moment...ll
Click to expand...
Click to collapse
So I can't get passed the dump. I keep getting a timed out error. I even tried to format the user data using fastboot and it failed. And I am curious about the boot_COM. I didn't see any file in the partition list matching that. I did see the boot partition and many others that I didn't recognize. So kinda feeling that we are back to

Reckless459 said:
So I can't get passed the dump. I keep getting a timed out error. I even tried to format the user data using fastboot and it failed. And I am curious about the boot_COM. I didn't see any file in the partition list matching that. I did see the boot partition and many others that I didn't recognize. So kinda feeling that we are back to
Click to expand...
Click to collapse
No the file wont say that in lgup, it'll be named that after you create a new folder on desktop call it "Dump" then use the dev-patched lgup and Dump option, select the folder Dump on the desktop and select the little checkbox for all on partitions list and click start...
also you may be haveing issues because of the .dll your useing... will lgup flash a stock .kdz to the device?
if yes, I'd think the dump option would work fine...
for firmware look here : https://www.mylgphones.com/metropcs-lg-aristo-3-lmx220ma-x220ma-firmware.html
for direct download use this link
Code:
http://pkg02.lime.gdms.lge.com/dn/downloader.dev?fileKey=FW88KEQ4C2VSAF0C3D54FH4/X220MA10e_00_MPCS_US_OP_0123.kdz

LgPWN'd said:
No the file wont say that in lgup, it'll be named that after you create a new folder on desktop call it "Dump" then use the dev-patched lgup and Dump option, select the folder Dump on the desktop and select the little checkbox for all on partitions list and click start...
also you may be haveing issues because of the .dll your useing... will lgup flash a stock .kdz to the device?
if yes, I'd think the dump option would work fine...
for firmware look here : https://www.mylgphones.com/metropcs-lg-aristo-3-lmx220ma-x220ma-firmware.html
for direct download use this link
Code:
http://pkg02.lime.gdms.lge.com/dn/downloader.dev?fileKey=FW88KEQ4C2VSAF0C3D54FH4/X220MA10e_00_MPCS_US_OP_0123.kdz
Click to expand...
Click to collapse
So yes it would load a stock formware but no it wouldn't allow me to dump even one partion. And the strange thing was that my list of options would chanhe sometimes. Like it would give me more options i.e. phonesettings. I even tried different cables and ports. It doesnt matter though i somehow hard bricked it so bad that it won't even. Boot to download mode and somehow fried my sim card to the point it wont work in any other phone. Im just waiting for metro to open so i can try again

Reckless459 said:
So yes it would load a stock formware but no it wouldn't allow me to dump even one partion. And the strange thing was that my list of options would chanhe sometimes. Like it would give me more options i.e. phonesettings. I even tried different cables and ports. It doesnt matter though i somehow hard bricked it so bad that it won't even. Boot to download mode and somehow fried my sim card to the point it wont work in any other phone. Im just waiting for metro to open so i can try again
Click to expand...
Click to collapse
OH WOW what a mess...
I would say it's the .dll in the LGUP causing pain here...
something you can try when you're ready to try again....
remove/uninstall devpatched LGUP and install regular store version
use the Common .dll
and add this file{ UI_Config.lgl } to your Common folder in the lgup install location ...
to make it easier I'll just zip up My common folder for you to replace yours
to do this
right click on lgup, select open file location...
navigate to the model subfolder you'll see things like
{ AllinOne } {Common} and {LGUP_LGNPST} folders...
at that point just right click and rename {Common} folder to {Commonbak},
then take my zip file I'm attaching and unzip it and inside will be Common folder...
just Copy / Paste that new Common folder to where the old one is..
set permissions of folder { read-only} and open the folder find file called { UI_Config.lgl }
and set it's permissions to READ ONLY . otherwise it'll be erased once you start LGUP.
and see If that changes anything with being able to Dump...
It's let me dump every LG i've plugged into it...
so I should think it should work for you too...

@Reckless459
is there nothing further?

LgPWN'd said:
@Reckless459
is there nothing further?
Click to expand...
Click to collapse
Dude...
First off let me say MertoPCS has the biggest pile of **** customer care department. I'm still waiting on my new device to comr from the warrenty department. I did however fix the sim issue (again metro sucks leaky bowels). I will definitely post any new developments as soon as the happen.
Oh also i did a dump on another phone (aristo 2) and had no issuses. And i saw what ypu meant with the boot_COM##. Thanks for the help.

LGUP dll
Sorry apparently i haven't reloaded this page in 12 hrs and their has been progressing i have 2 aristos im going to work on this also.
i will step in and help out ill read the updates and post further
---------- Post added at 09:43 PM ---------- Previous post was at 09:35 PM ----------
LgPWN'd said:
@Reckless459
is there nothing further?
Click to expand...
Click to collapse
I had a question i would like to chime in here, can i do an extraction on the KDZ with lg extractor i see a boot image in it and flash that?

Nvitethedark said:
Sorry apparently i haven't reloaded this page in 12 hrs and their has been progressing i have 2 aristos im going to work on this also.
i will step in and help out ill read the updates and post further
---------- Post added at 09:43 PM ---------- Previous post was at 09:35 PM ----------
I had a question i would like to chime in here, can i do an extraction on the KDZ with lg extractor i see a boot image in it and flash that?
Click to expand...
Click to collapse
it may work,
when lgup is being a pain it's worth a try.
I say go for it. but to be certain I'd try flashing the extracted boot.img with partitions DL option in lgup once to make sure it flashes it b4 trying to patch it and flash it again...
Just my 2 cents.

LgPWN'd said:
it may work,
when lgup is being a pain it's worth a try.
I say go for it. but to be certain I'd try flashing the extracted boot.img with partitions DL option in lgup once to make sure it flashes it b4 trying to patch it and flash it again...
Just my 2 cents.
Click to expand...
Click to collapse
Aristo3 FW: X220MA10B "10b" came on the system stock
LGUP V1.14 - patched
DLL v1.0.28.17
The above dll is the only one I have found that will recognize the phone and load LGUP, I have also attempted to use uppercut: Error DLL for X220M10b is invalid install a valid dll
https://imgur.com/1Ptrv3n
however, once i attempt to dump phone reboots into download mode i get: Error: 0x2000, please use latest Dll LAF protocol version is not match dll=0 device 162512928
https://imgur.com/5I7GfOa
I attempted to use the LGUPC DLL from the kdz V 10E firmware and that did not recognize the device i also attempted to use your zipped commons.
any feedback on this?
I feel that i should use LG tool update to 0F then use the 0F kdz to attempt all this?

DOWNGRADE Don't UPGRADE
Nvitethedark said:
Aristo3 FW: X220MA10B "10b" came on the system stock
LGUP V1.14 - patched
DLL v1.0.28.17
The above dll is the only one I have found that will recognize the phone and load LGUP, I have also attempted to use uppercut: Error DLL for X220M10b is invalid install a valid dll
https://imgur.com/1Ptrv3n
however, once i attempt to dump phone reboots into download mode i get: Error: 0x2000, please use latest Dll LAF protocol version is not match dll=0 device 162512928
https://imgur.com/5I7GfOa
I attempted to use the LGUPC DLL from the kdz V 10E firmware and that did not recognize the device i also attempted to use your zipped commons.
any feedback on this?
I feel that i should use LG tool update to 0F then use the 0F kdz to attempt all this?
Click to expand...
Click to collapse
If at all posible find the OLDEST firmware possible in kdz and do a full flash of that .
and try your dll mod with that by extracting the dll from said kdz and renaming to what ever the one in Common folder is and keep the UI_Config.lgl in there to keep the extra options if possible...
It's all trial and error with this stuff, so keep at it.
DO NOT flash a firmware.kdz from a different model of the device as it'll flash aboot sbl etc and you'll end with a brick that can't be fixed.
and I've always liked { in my experiments} to use the partitions DL option even when downgrading etc to be able to NOT CHOOSE the boot-stack partitions...
but give it a shot and tell us how it go's.
we may be able to split a root-bounty if we come up with something working across users

LgPWN'd said:
OH WOW what a mess...
I would say it's the .dll in the LGUP causing pain here...
something you can try when you're ready to try again....
remove/uninstall devpatched LGUP and install regular store version
use the Common .dll
and add this file{ UI_Config.lgl } to your Common folder in the lgup install location ...
to make it easier I'll just zip up My common folder for you to replace yours
to do this
right click on lgup, select open file location...
navigate to the model subfolder you'll see things like
{ AllinOne } {Common} and {LGUP_LGNPST} folders...
at that point just right click and rename {Common} folder to {Commonbak},
then take my zip file I'm attaching and unzip it and inside will be Common folder...
just Copy / Paste that new Common folder to where the old one is..
set permissions of folder { read-only} and open the folder find file called { UI_Config.lgl }
and set it's permissions to READ ONLY . otherwise it'll be erased once you start LGUP.
and see If that changes anything with being able to Dump...
It's let me dump every LG i've plugged into it...
so I should think it should work for you too...
Click to expand...
Click to collapse
reinstalled a non-patched version of lgup and used your common folder and set read-only options attempted a dump got this:
https://imgur.com/FJPMUwv