Related
For http://forum.xda-developers.com/showthread.php?t=1056847
Where do I download the APX Drivers? I can't seem to find them..
Also, after flashing CWM, I can just flash roms right? I don't need to install CWM everytime I flash a rom..
APX Drivers
When you download the NVFlasher.zip. set up a new folder and place the .zip file inside of it. Then unzip the file inside that folder. There will be two folders. One of them is the NV Flasher program folder. The other folder is titled APX. The particular driver .dll file you will be looking for is in the i386 folder inside of the APX folder. So after you unzip that file, continue to follow the instuctions in that particular thread. When the computer asks you to browse for that particular folder (search automatically, or manually choose it) navigate to the NVFlasher folder, double click the APX folder and then double click on the i386 folder and choose the particular .dll file it is asking for.
You will not need to flash every time after following this particular method. This creates a permanent recovery on your phone. You can simply enter recovery and flash a new rom. However, I strongly suggest you always create a backup of your current ROM before trying something new. Just in case...
Hope this helps.
Derp. I google'd half an hour trying to found APX Drivers. It was included in the download.
Btw, what if I have a AMD computer instead of an intel?
Do I use the amd64 folder instead?
Another question. Do I need adb tools and some LG drivers before I can install cwm and root?
As far as which folder to use, I am unsure. I think that the APX driver install box will list a very specific .dll file. I know that I found that particular file in the i386 folder. That's what i would recommend. If it doesn't work, you can always restart the process and click on the other folder.
I do not think you need to install sdk and adb tools. It appears that NV Flasher is a complete package, all in one type of program.
Good luck. Keep us posted on how it goes.
It doesn't matter where you extract the drivers to because when you need to load them tell the computer where to look rather than it searching automatically. Do it manually that way it will get the right driver from the file folder you downloaded. Like other poster said if one doesnt work try the other your computer is smart enough to know which is right for it atleast.
I don't think you need any other drivers because those other drivers are for when you sync it or use the phone as a mass storage device. I would just do a back of up and load a custom rooted rom and go from there.
If your G2X is still using froyo go for the ultimate rom as your first rom till you decide to go for GB or whenever we get ICS
Hello look for a link works for PG88IMG_based_on_RUU_Saga_HTC_Europe_1.28.401.1.zi p
Anyone can help me.
i find this but link not work
loveboatcaptain said:
and here it is...
based on the RUU_Saga_HTC_Europe_1.28.401.1_Radio_20.28b.30.080 5U_38.03.02.11_M_release
downloadlink: PG88IMG_based_on_RUU_Saga_HTC_Europe_1.28.401.1.zip
just rename it to "RG88IMG.zip" and put it on the root of your sd card.
then reboot into fastboot mode (bootloader) and the rest will be done automaticly.
you can extract that zip file to modify the system image to get root e.g.
search the forums to get it out how.
kind regards
Click to expand...
Click to collapse
Maybe try this. Not sure if it'll work
http://forum.xda-developers.com/showthread.php?t=1488672
Just scroll down a bit
Edit: forget to mention, maybe your zip-file already contains the pg88.. Thing you need
Sent from my Desire S using XDA App
Thanks for the reply but that's only radio and I need ROM a full install from sdcard And also does not need to do s-off
OP says you need pg88img.
That's not a ROM
Which ROM do you need? didn't searching the forum solve you're problem?
You have to state clearly what you want or need
Edit: Maybe that's what you need
http://forum.xda-developers.com/showthread.php?t=1002506
Sent from my Desire S using XDA App
Whatever may be the reason that you need this (?) here is how to get it yourself:
Download RUU_Saga_HTC_Europe_1.28.401.1_Radio_20.28b.30.080 5U_38.03.02.11_M_release from the sticky Stock ROMs thread.
Run the RUU on your PC.
On the first screen (do not press anything when it starts) open your Windows Explorer, browse to the C: drive and in the search field type rom.zip.
Wait for the search to complete and copy the rom.zip file to another loacation.
Close the RUU setup.
Rename the rom.zip (this is exactly what are you looking for) to PG88IMG.zip and copy to SDCard.
Yeah you are thinking about the rom.zip of the RUU which is renamed to that. So follow what amidabuddha said!
Thank you very much this is exactly what i look for.
thanks for all
Hello all,
Firs I like to apologies if I've posted in the wrong section of the forum.
As the title says, I have a Iglo A101 with GingerBread 2.3.4 phone and I accidently deleted the system/bin/sh file.
I was searching for a2sd and I downloaded it, but when running it, instead of pressing 1 - "install a2sd" I pressed 2 "uninstall a2sd", by mistake, and by the time I realized the sh file was deleted. Now the phone is no longer rooted and can't be rooted and also my Wi-Fi doesn't work anymore.
I've search the net for answer but I can't find a solution to this type of phone.
Could someone help me fix this or at least get the Wi-Fi working again?
Thanks in advanced...
OK, I've manage to contact the retailer and he gave me what appears to be the all system files, as now I have a rar containg system.img userdata.img recovery.img etc etc. How do I install this files, because he doesn't appear to know either. I tried from the recovery mode using install update.zip from sdcard but it give's me invalid OTA package and I can't find an answer on how to flash a img file from recovery mode...
pitvenin said:
OK, I've manage to contact the retailer and he gave me what appears to be the all system files, as now I have a rar containg system.img userdata.img recovery.img etc etc. How do I install this files, because he doesn't appear to know either. I tried from the recovery mode using install update.zip from sdcard but it give's me invalid OTA package and I can't find an answer on how to flash a img file from recovery mode...
Click to expand...
Click to collapse
Does the device have fastboot? If so the files need to flashed using fastboot. The command is fastboot flash boot boot.img
Fastboot flash system system.img.
If your device does not have fastboot then you will need to extract the system.img and make a flashable .zip so you can flash through CWM or whatever your recovery is. If you are using stock recovery then I eexpect you will either need to find a solution or send it off for repair. I will have a look into helping you get your device back up and running but I cant promise to succeed. Give me a few days and I will report back with any solutions or info to get you on your way to fixing your device.
Regards
Blackwatch
Sent from my LT18i using xda premium
pitvenin said:
Hello all,
Firs I like to apologies if I've posted in the wrong section of the forum.
As the title says, I have a Iglo A101 with GingerBread 2.3.4 phone and I accidently deleted the system/bin/sh file.
I was searching for a2sd and I downloaded it, but when running it, instead of pressing 1 - "install a2sd" I pressed 2 "uninstall a2sd", by mistake, and by the time I realized the sh file was deleted. Now the phone is no longer rooted and can't be rooted and also my Wi-Fi doesn't work anymore.
I've search the net for answer but I can't find a solution to this type of phone.
Could someone help me fix this or at least get the Wi-Fi working again?
Thanks in advanced...
Click to expand...
Click to collapse
You have use flash tools to flash those files in your mobile.......upload your build.prop under /system/
I'll tell you more!!
Sent from my GT-I5801 using XDA
I have stock recovery 3e. I tried to make an update.zip but I keep getting invalid OTA Package..
Here is the build.prop, sorry for my late response
And here is the one that is on my phone, I've manage to get it using jota text editor. Some how that application can still see some system files, but it can't write..
pitvenin said:
I have stock recovery 3e. I tried to make an update.zip but I keep getting invalid OTA Package..
Here is the build.prop, sorry for my late response
Click to expand...
Click to collapse
Do you have an update.zip of complete ROM for you phone??
If so, then upload your recovery.img....i'll mod it & give you a modded recovery......
here it is
any luck?
pitvenin said:
any luck?
Click to expand...
Click to collapse
Trying....
hi
i had similar problem on this device a101 i did not delete any folder but by rooting the device my wifi and Bluetooth stoped working.i solved the problem by the factory menu.....have you tried it?
i did factory reset, but since there a system file missing it doesn't solve it..Can't there be a way to create an update.zip package with the sh file and then apply like an update from recovery? I've been trying to understand what does invalid OTA package mean, I think if that would be solved then I could easily put the file back...
i think you need spb launcher
i have to admit i used it only ones before for china 5388 there i needed com + usb cable here you need just a normal cable us the boot on this phone is different i have all you need give me email i will send to you. i have scater for a101 file too.i never used it but i have.Us i said my phone work ok after reset from factory mode
still nothing?
pitvenin said:
OK, I've manage to contact the retailer and he gave me what appears to be the all system files, as now I have a rar containg system.img userdata.img recovery.img etc etc. How do I install this files, because he doesn't appear to know either. I tried from the recovery mode using install update.zip from sdcard but it give's me invalid OTA package and I can't find an answer on how to flash a img file from recovery mode...
Click to expand...
Click to collapse
If you have the system.img image, you can try to flash it in the phone with SP Flash Tool,
Here is the tutorial:
bm-smartphone-reviews.blogspot.com/2011/10/mt65x3-flashing-tutorial.html
arcristi..all I can say is : THANK YOU!
I finally managed to get the system files back, I'm gonna hang on to this program just in case....Thanks again
A101 Android
Please, can you here to give all system files, which were sent to you from retailer? I have the same model. Thanks!
I'd like to remove root and go back to stock. I have a rogers one x and I've tried using the rogers RUU PJ83IMG.... to flash back to stock, but I can't use fastboot since my phone is bootloader locked, and I can't run the RUU because it is a .zip file and not a .exe. Renaming it to an .exe and running it does nothing.
Any help is appreciated!
Try un-zipping the file and run the exe in the folder created. Also, since we do not have s-off yet, we are able to remove tampered banner, but it will say re-locked. No estimated arrival of s-off at this point.
Sent from my HTC One X using XDA
shortyboy said:
Try un-zipping the file and run the exe in the folder created.
Click to expand...
Click to collapse
This. The RUU file is not meant to be run as-is. Unzip the contents onto your PC (such as into a folder on your PC desktop), then run the .exe that is inside the extracted contents.
And where did you get the idea of changing the extension from .zip to .exe? That's probably a bad idea in almost all circumstances. You can't just change the type of file by renaming it.
shortyboy said:
Also, since we do not have s-off yet, we are able to remove tampered banner, but it will say re-locked. No estimated arrival of s-off at this point.
Click to expand...
Click to collapse
The "tampered" flag will be removed after RUU. Tampered flag is for root, not BL unlock. And the OP said he is still BL locked.
redpoint73 said:
This. The RUU file is not meant to be run as-is. Unzip the contents onto your PC (such as into a folder on your PC desktop), then run the .exe that is inside the extracted contents.
And where did you get the idea of changing the extension from .zip to .exe? That's probably a bad idea in almost all circumstances. You can't just change the type of file by renaming it.
The "tampered" flag will be removed after RUU. Tampered flag is for root, not BL unlock. And the OP said he is still BL locked.
Click to expand...
Click to collapse
Thanks for your replies. Unfortunately there is no .exe in the RUU. I have googled extensively but cannot find one with an executable. Would either of you be able to link me? I need Rogers 1.73. Thanks for your help
Edit: I discovered this and tried it: http://forum.xda-developers.com/showthread.php?t=1658929 however i get an IMAGE UPDATING ERROR: This ROm update utility cannot update your device.
if you go to setting about/software information what does it say under software version?
also if your bootloader is unlocked relock it in fastboot with the command "fastboot oem lock"
gunnyman said:
if you go to setting about/software information what does it say under software version?
also if your bootloader is unlocked relock it in fastboot with the command "fastboot oem lock"
Click to expand...
Click to collapse
Software version 1.73.631.1
Just to clarify, I have not unlocked my phone, only root.
toastyy said:
Software version 1.73.631.1
Just to clarify, I have not unlocked my phone, only root.
Click to expand...
Click to collapse
when you flashed it did you get an error 155 or an error 140?
also THIS is the RUU you need http://www.filefactory.com/file/9qe....09.06_10.81.32.14L_release_254934_signed.zip
And you didn't mess with the CID ever? If not, I don't see any reason why the correct (Rogers) RUU would not work. Make sure HTC Sync is installed (maybe re-install, just to be safe), reboot the computer and try again. Perhaps try to download the RUU again, just to make sure the download isn't corrupt.
redpoint73 said:
And you didn't mess with the CID ever? If not, I don't see any reason why the correct (Rogers) RUU would not work. Make sure HTC Sync is installed (maybe re-install, just to be safe), reboot the computer and try again. Perhaps try to download the RUU again, just to make sure the download isn't corrupt.
Click to expand...
Click to collapse
Ohh, you're right! I changed the Cid to 1111111.. For supercid. How do I change that back?
As for the ruu, I can't run them because I have no exercise file to run. Changing the zip to an exercise gives me an error about my computer not being able to run it. I will download the above ruu and try it when I get home in an hr.
Thanks for your help!
You should be able to run the Rogers RUU with SuperCID. That's what SuperCID is, it lets you install firmware regardless of the CID that its intended for.
Not sure how to change the CID back to Rogers. Look on the SuperCID thread (not the one-click method, but the original "longer" method) and see if there is discussion on changing it back.
And to reiterate, you can't magically change a file from one type to another, just by changing the file extension from .zip to .exe. The RUU package should have ARUWIzard.exe inside once you unzip it. Are you sure you are unzipping it properly?
redpoint73 said:
You should be able to run the Rogers RUU with SuperCID. That's what SuperCID is, it lets you install firmware regardless of the CID that its intended for.
Not sure how to change the CID back to Rogers. Look on the SuperCID thread (not the one-click method, but the original "longer" method) and see if there is discussion on changing it back.
And to reiterate, you can't magically change a file from one type to another, just by changing the file extension from .zip to .exe. The RUU package should have ARUWIzard.exe inside once you unzip it. Are you sure you are unzipping it properly?
Click to expand...
Click to collapse
The problem is the rogers file isn't an EXE it's a zip file. There's a post somewhere around here explainng how to install it.
gunnyman said:
The problem is the rogers file isn't an EXE it's a zip file. There's a post somewhere around here explainng how to install it.
Click to expand...
Click to collapse
Ahh, I see the problem. The Rogers files is not a true RUU package, just the zip file usually contained in the "larger" RUU zip file. Is that right? The OP still can't change the file extension to .exe and make it run that way. Sounds like from the thread the OP linked in post 4 above, he needs to have a folder with the "other" RUU contents (including ARUWizard.exe), drop the file you linked (from Filefactory), then run the ARUWizard. Its not completely clear, but this seems to be the way?
He could also I thing just put that pdimg. Zip file on the SD card and boots into recovery and it should flash right?
gunnyman said:
He could also I thing just put that pdimg. Zip file on the SD card and boots into recovery and it should flash right?
Click to expand...
Click to collapse
Not sure. I've never in my life flashed anything from stock recovery
But it seems logical. I think normally the ARUWizard says its pushing the file to the phone, so it would make sense it just flashes from stock recovery.
I understand that I can't change the filetype like that . I just saw peterhtc mention having to do that in another thread. I am sure i have unzipped it properly. I'll try again with the other ruu linked above.
toastyy said:
I understand that I can't change the filetype like that . I just saw peterhtc mention having to do that in another thread. I am sure i have unzipped it properly. I'll try again with the other ruu linked above.
Click to expand...
Click to collapse
if you unzip it and see a zip file that starts with pd and some number I THINK it's 83 put that file on the root of your SD card space and reboot to bootloader. Then choose recovery. If all goes well it will detect that file and allow you to flash it. It should work fine because it's a signed zip from HTC.
---------- Post added at 03:59 PM ---------- Previous post was at 03:54 PM ----------
I just realized we're helping you return the most awesome phone in the world ™
Jumping ship?
gunnyman said:
if you unzip it and see a zip file that starts with pd and some number I THINK it's 83 put that file on the root of your SD card space and reboot to bootloader. Then choose recovery. If all goes well it will detect that file and allow you to flash it. It should work fine because it's a signed zip from HTC.
---------- Post added at 03:59 PM ---------- Previous post was at 03:54 PM ----------
I just realized we're helping you return the most awesome phone in the world ™
Jumping ship?
Click to expand...
Click to collapse
Haha well no not exactly. I have been dealing with rogers for 2 months trying to return the phone I bought outright in order to get a new one on a plan. I originally wanted to see how the SG3 was so I could still return the onex in time to pick that up, but I think i'll be sticking with the HTC (the sg3 is SO ugly). I assure you I am not jumping ship
gunnyman said:
He could also I thing just put that pdimg. Zip file on the SD card and boots into recovery and it should flash right?
Click to expand...
Click to collapse
So I tried to place the full zip file onto the phone in the main directory, both as the full file name and then just as the P83..etc name, rebooted into recovery, but I just got a pic of the phone with a red triangle+ exclamation mark. Currently I am extracting the whole zip onto the main directory and will try flashing recovery like this. Is that safe? I assume the phone will be able to tell which .img it needs. There is no file that begins with P83 in the actual zip
toastyy said:
So I tried to place the full zip file onto the phone in the main directory, both as the full file name and then just as the P83..etc name, rebooted into recovery, but I just got a pic of the phone with a red triangle+ exclamation mark. Currently I am extracting the whole zip onto the main directory and will try flashing recovery like this. Is that safe? I assume the phone will be able to tell which .img it needs. There is no file that begins with P83 in the actual zip
Click to expand...
Click to collapse
I'm curious about the contents of that zip I'll download it and check it out.
holy crap file factory is slow.
gunnyman said:
I'm curious about the contents of that zip I'll download it and check it out.
Click to expand...
Click to collapse
The download is quite slow - here are the contents
http://puu.sh/BU6B
Hi guys,
I really need help on this, and i am hoping very much someone can be patient with me as i try to install a custom ROM on my HTC Desire S.
The BIGGEST problem i am facing is getting command text correct in the command window, i am using Windows 7 home premium on a laptop, the previous posts i read and followed were all saying put this in the command and put that in the command but none of them were correct and my computer kept saying wrong!
I am currently at the stage where i have visited HTC Dev and i have sucessfully gone through the procedure for unlocking the bootloader, i found this difficult to do, command prompts they gave were wrong i had to change paths, and i was missing certain .dll files on my computer too, which HTC did not mention i would need, but here i am after days of messing about and trying all sorts of commands, with a unlocked bootloader, with S-ON and running a Vodafone stock rom of Gingerbread Android version 2.5.3.
My phone is Vodafone branded i wish to remove all of their branding and apps, and install a plain unbranded ROM.
However, i need step by step instruction, i can not do this from threads that say "follow this here (link to another thread) which then links to another and another, i ended up with i think 15 tabs in the browser open, with conflicting advice, conflicting information, mistakes, and a whole lot of jargon that i did not understand, so what i really am hoping for is firstly links to all the software or downloads that i will need first, direct link to the rom, the backup, and anything else, if anyone needs info from my phone to pinpoint a specific rom i am happy to give it, i do not mind another HTC rom as long as its plain with no carrier apps or branding on it, then once i have got all the downloads sorted out i can start from there.
Please help me out i have been at this for days and getting nothing except confused.
Many thanks! :good:
3324536
I have found this quite up to date guide which is very easy to follow, are the rom and all the downloads OK for a UK phone?
I have hboot 200. 0002 as well as S-ON so i believe its the same, i can follow this one quite easy is it ok to do??
Also, while flashing this rom and recovery image, should i have SDK tools open on my computer??
And another thing, i noticed while extracting the recovery image that it just says recovery, should i rename it to recovery.img or leave it as it is? Because the command prompts are saying "recovery.img" and not just "recovery"?????
Thanks.
http://forum.xda-developers.com/showthread.php?t=1525100
mickmick72 said:
I have found this quite up to date guide which is very easy to follow, are the rom and all the downloads OK for a UK phone?
I have hboot 200. 0002 as well as S-ON so i believe its the same, i can follow this one quite easy is it ok to do??
Also, while flashing this rom and recovery image, should i have SDK tools open on my computer??
And another thing, i noticed while extracting the recovery image that it just says recovery, should i rename it to recovery.img or leave it as it is? Because the command prompts are saying "recovery.img" and not just "recovery"?????
Thanks.
http://forum.xda-developers.com/showthread.php?t=1525100
Click to expand...
Click to collapse
First you need to get in Folder Options in your WIN 7 Control Panel.There's option in View tab called " Hide extension for known file types". Uncheck that option and click ok.Then you will see extensions for all files on you win 7.This will show you extension of recovery.Should be .img.
Then you can follow that guide.I used the same one.
You need to get newest recovery.There are TWRP and 4ext for HTC Desire S.They are up to date.Do a little search and read posts and info.
Check post about panels (Hitachi or Sony)http://forum.xda-developers.com/showthread.php?t=1943524.Again search for that in HTC Desire S forum here.When you check all of that you can try any custom ROM but always backup nandroid.
Little hint : If you want to start CMD window in any folder first open that folder hold SHIFT and right click on empty space.You will get command there named Open command window here.Click on that and you can work.
GL.If you need more help ask here again.
SKENER said:
First you need to get in Folder Options in your WIN 7 Control Panel.There's option in View tab called " Hide extension for known file types". Uncheck that option and click ok.Then you will see extensions for all files on you win 7.This will show you extension of recovery.Should be .img.
Then you can follow that guide.I used the same one.
You need to get newest recovery.There are TWRP and 4ext for HTC Desire S.They are up to date.Do a little search and read posts and info.
Check post about panels (Hitachi or Sony)http://forum.xda-developers.com/showthread.php?t=1943524.Again search for that in HTC Desire S forum here.When you check all of that you can try any custom ROM but always backup nandroid.
Little hint : If you want to start CMD window in any folder first open that folder hold SHIFT and right click on empty space.You will get command there named Open command window here.Click on that and you can work.
GL.If you need more help ask here again.
Click to expand...
Click to collapse
Thanks mate, i will do what you advise, good trick about opening command in a folder
I will ask if i get any questions then cheers
OK i have a question straight away, it says in the tutorial:
Copy the rom onto the SD card, then it says copy the boot.img onto the android C folder - SO -
Do i first extract the boot.img and copy it to the C android folder AND copy the same boot.img onto my SD card, as well as the meta info and other stuff?
OR do i copy the boot.img onto the C drive only, and copy everything else onto the SD card?
A little confused here on what to do.
Thanks for any help.
Copy the rom onto the SD card, then it says copy the boot.img onto the android C folder
Click to expand...
Click to collapse
You do exactly that. You place the rom into the sd card, and you copy the boot.img into the said folder.
This is because you are "unlock s-on", the recovery isn't able to flash the boot.img, so you have to do it manually.
Remember, even after you flash the rom, if you did not flash the boot.img the phone will NOT fully boot.
*also, the guide says to turn the phone off after flashing the rom and boot into the bootloader. I dont think this is necessary, you can just reboot the phone into bootloader from the recovery itself.
98623459
#Fear said:
You do exactly that. You place the rom into the sd card, and you copy the boot.img into the said folder.
This is because you are "unlock s-on", the recovery isn't able to flash the boot.img, so you have to do it manually.
Remember, even after you flash the rom, if you did not flash the boot.img the phone will NOT fully boot.
*also, the guide says to turn the phone off after flashing the rom and boot into the bootloader. I dont think this is necessary, you can just reboot the phone into bootloader from the recovery itself.
Click to expand...
Click to collapse
So, just to clarify, i copy the whole .zip onto the SD card (including boot.img) and then re copy the boot.img into my Android folder on the computer (i will then have boot.img on BOTH the SD card and the C Android folder, this is where i am getting confused, i intend to start flashing today sometime.
OK i am going to flash Reaper V.4 rom and 4EXT as recovery, if anyone has better suggestions on a safe rom please let me know i will flash that instead.
Thanks.
mickmick72 said:
So, just to clarify, i copy the whole .zip onto the SD card (including boot.img) and then re copy the boot.img into my Android folder on the computer (i will then have boot.img on BOTH the SD card and the C Android folder, this is where i am getting confused, i intend to start flashing today sometime.
OK i am going to flash Reaper V.4 rom and 4EXT as recovery, if anyone has better suggestions on a safe rom please let me know i will flash that instead.
Thanks.
Click to expand...
Click to collapse
You can try other roms when you try that.There's a lot of nice and smooth editions. First try reaper you have it now.
With S-ON you have to flash boot.img in fastboot after you install rom from recovery.That's why you need to copy it in android-tools folder.Whole zip goes on sd and you backup old rom from recovery, wipe everything except sd (wipe is recommended) and then install from zip in recovery.After that reboot in bootloader then flash boot.img from fastboot.Reboot and wait.Should be in in few min.No more then 10.Follow the guide.
GL
4325422
SKENER said:
You can try other roms when you try that.There's a lot of nice and smooth editions. First try reaper you have it now.
With S-ON you have to flash boot.img in fastboot after you install rom from recovery.That's why you need to copy it in android-tools folder.Whole zip goes on sd and you backup old rom from recovery, wipe everything except sd (wipe is recommended) and then install from zip in recovery.After that reboot in bootloader then flash boot.img from fastboot.Reboot and wait.Should be in in few min.No more then 10.Follow the guide.
GL
Click to expand...
Click to collapse
Any idea what i am doing wrong here? I do have recovery.img in my Android folder, but its not in the android tools folder, should i be putting it in the adt bundle folder rather than leaving it outside of it?
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\Michael>cd \Android
C:\Android>fastboot flash recovery recovery.img
error: cannot load 'recovery.img'
C:\Android>
Yes put the recovery.img inside the fastboot/adb folder
jmcclue said:
Yes put the recovery.img inside the fastboot/adb folder
Click to expand...
Click to collapse
OK going to try again, thanks!
Success!! And all the crap vodafone apps and branding have gone! I did run into problems but i sorted it out. Thanks very much for all the help here i will be installing new roms all the time
On this reaper rom, there is no app for google play store, would anyone know how to install it? Or how do i get to play store from this rom?
And no options for fastboot that i can see, so i may have a few problems installing other roms
Where can i see a list of all the roms i can download for the Desire S??
Thanks!!
mickmick72 said:
Success!! And all the crap vodafone apps and branding have gone! I did run into problems but i sorted it out. Thanks very much for all the help here i will be installing new roms all the time
On this reaper rom, there is no app for google play store, would anyone know how to install it? Or how do i get to play store from this rom?
And no options for fastboot that i can see, so i may have a few problems installing other roms
Where can i see a list of all the roms i can download for the Desire S??
Thanks!!
Click to expand...
Click to collapse
Flash gapps (google apps) in recovery and for everything else ul find below
http://forum.xda-developers.com/showthread.php?t=1146601
jmcclue said:
Flash gapps (google apps) in recovery and for everything else ul find below
http://forum.xda-developers.com/showthread.php?t=1146601
Click to expand...
Click to collapse
jmcclue means you need to download gapps for your android.That will be in zip and you install it through recovery just like rom.Most of custom rom require that step.Copy zip on SD,boot in recovery and flash from zip.Reboot and you will get google apps.
This guide is for HTC Desire S and you can find most of things you need but for roms follow Android Development in HTC Desire S on XDA.
GL
mickmick72 said:
And no options for fastboot that i can see, so i may have a few problems installing other roms
Click to expand...
Click to collapse
fastboot is controlled by the bootloader, the rom can't affect it in any way. The option "fast boot" in HTC Sense roms is something else, that sort of hibernates the phone instead of powering off, so the phone "boots fast".
Thanks guys i will go aheah and do these
SKENER said:
This guide is for HTC Desire S and you can find most of things you need but for roms follow Android Development in HTC Desire S on XDA.
GL
Click to expand...
Click to collapse
That link i posted also has all the roms in it