Database Info

Phone is dead???

My Orange SPV has died on me - did it yesterday, just went blank and wouldnt turn on, then after battery removal and fiddling it burst back into life and was fine. Today it did the same, but it won't come back - I thought it was a flat battery, but its still the sames with a fresh charged one. When I plug the phone into the charging cradle, the 'phone live' light shows red.
Any suggestions how to fix it ? - the unit is bog-standard, and I havn't done anything to kill it.
Any suggestions welcome, thanks
M

grizelli said:
Any suggestions how to fix it ?
Click to expand...
Click to collapse
Can you still access bootloader mode?
Sascha

Phone is dead
Fraid not, the phone won't turn on at all
M

mine used to act that way alot when i used rom1.6
no response from on button at all
but hardreset did work
give it a try

hey simialr problem with me also i m using xda2 with wm5 my phone got hang bootspash image also crush
i can go bootloader mode but after instaling new rom same story
i can go hard reset menu also but after that phone didnt start after doing that
in hardreset manu enable kitl =no regisrty hive =yes format storage =yes
what shoud i do ?????
plzzzzz

i have the same problem! the phone doesn't work anymore!
tryed new reflash, complete 100%, but after hard reset nothing happened.
tried reset - only O2 screen but with the display turned off, no led is working when i try to charge it.
if anyone has a solution pleeeeeeeeeeeeease help!

suggestions
suggestions
does any on of you know about the hardware ??????????
it is the problem of hardware not the software
if know hard ware then i told you what to do !!!!
for softely done
my suggestions is keep you spv to charging for hole night and look at morning
what happen????
may it help you

hey i chek hardware it okay i try fill charge bettery also

hi chirag
if know the hardware then heat up the processor with blowergun or hotairgun what ever you call it but put the liquide solder past on it first then in hotairgun the temp on 4 and air on 4 or 5 and blow for 1.5 to 2 min on processor and disk on chip or ram give the hot air to it after that put ipa on it and clean the hole thing put your display and battery and make hard rest or flash fresh rom on it .
i think its work for you
the reson of boot up failure
is because the extrem use of your phone is make the bollgride which is connecting your processor and motherbord Drysolder in it after this action all drysolder is resolder to its place and its start reworking
Thanks
[email protected] Rules

hey i ll try and let u know
i think the backup bettery is also to be chek if it not booting up device then also its not strating what u say ???

backup battery
backup battery is not the isshu because in win5 you dont need backup batt. its only for not reseting the time and date.
you go to the extremely good hardware eng. or serivce person to fix it if cant find any one plz call me. i live in poona if you want my help we r nearby you r in bombay and me in poona.

but i can try
but i can try.
[email protected] Rules

oh thats nice of u i ll try here if didnt work i ll contact u sure ...
thanks

its my mail add.
its my e-mail add.
[email protected]om
if you need...............

Phone no longer boots

Wondering if anyone has any ideas on how to reapir this if it's possible:
I have a TMO SDA which I apparently got confused and thought was an HTC Typhoon last night rather than a Tornado.
I decided to follow some directions to upgrade the Typhoon to WM6, and after the first reboot (http://www.geocities.com/gggbitonti/typhoon.htm), all it does is turn on to this white screen and not do anything.
Is there any way to repair this or is it KIA?
Thanks,
Brian

bdesmond said:
Wondering if anyone has any ideas on how to reapir this if it's possible:
I have a TMO SDA which I apparently got confused and thought was an HTC Typhoon last night rather than a Tornado.
I decided to follow some directions to upgrade the Typhoon to WM6, and after the first reboot (http://www.geocities.com/gggbitonti/typhoon.htm), all it does is turn on to this white screen and not do anything.
Is there any way to repair this or is it KIA?
Thanks,
Brian
Click to expand...
Click to collapse
Are you able to get into the bootloader mode.. Check by holding the camera button and connecting the USB. Please also mention what the screen says?? if it says tornado.. SPL 2.xxx something.. then its cool you can install a new system and your phone will be fine.. If not.. you are having a expensive paperweight...

tejasphatak said:
Are you able to get into the bootloader mode.. Check by holding the camera button and connecting the USB. Please also mention what the screen says?? if it says tornado.. SPL 2.xxx something.. then its cool you can install a new system and your phone will be fine.. If not.. you are having a expensive paperweight...
Click to expand...
Click to collapse
No, nothing happens if I hold hte camera button and connect the USB cable. If i hit the power button it will just come up with a white screen - no messages. I let it sit for a couple hours like that and it was just a white screen the whole time.
Thanks.

it is not bad, you have to get a new phone!

You just bricked your phone, since its already dead, might as well try to JTAG it

Help Problem!!!

After Upgrading to windows 6 Some times My phone screen suddenly fade to white , blue or black.. I've tried different roms and still the problem exist
can someone help me? what is happening to my universal? is it because WM6 still not stable?

please some one help me

free_10w said:
After Upgrading to windows 6 Some times My phone screen suddenly fade to white , blue or black.. I've tried different roms and still the problem exist
can someone help me? what is happening to my universal? is it because WM6 still not stable?
Click to expand...
Click to collapse
Which Radio Rom are you using ?
Try another
wout

I've been using 1.17 but when I use 1.15 the screen also fade to blue or white

Try without sd card
or
try older (reliable) wm5 rom
wout

I already try KAMAL WM5 but still it happens and I also forget to mention that when the screen fade to white or blue my phone suddenly become hot..is there any possibility that the problem is from the hardware?

That doesn't sound good.
could you try another battery ?
and turn wifi of
was wifi on ? when screen went with/blue
wout

Yes, I have try another battery and the wifi is off..
The screen went blue when I was receiving sms or when I want to send sms.
sometime when I left the phone standby for half an hour the phone cannot be turned on and I have to press the reset button and after entering the splash screen the screen went blue/white again so I have to reset several time

i think its something e related to the vibrate? its shorted or somehting and the power is going there but no vibration.. thus causing the overheating and the freezing.. im not sure but maybe.. also have you dropped the machine?

Appears to be a hardware problem. You may try this, it may work:
1. Remove the battery. Keep the battery out at least for a few hours.
2. With the battery out operate a few keys randomly. Also operate the on/off switch a couple of times.
3. Remove your sim card and storage card.
4. Put the battery back.
5.Allow the booting process without intruption.
6. If it works well just switch off, remove battery and insert the sim card and sd card. reboot
Although it sounds a bit wierd it does work in some cases. Worth giving it a try.

thanks Wout,dj_gabzz,d_ranade for the help
I have installed the official WM5 and now it seems ok..
it means that the problem is because of the roms not the hardware..
and once again thanks a lot guys

free_10w said:
thanks Wout,dj_gabzz,d_ranade for the help
I have installed the official WM5 and now it seems ok..
it means that the problem is because of the roms not the hardware..
and once again thanks a lot guys
Click to expand...
Click to collapse
Glad you could solve your problem.

same here man.. glad you got everything straightened out, i hope you dont encounter further problems..

once again thanks

bricked tornado

hey all,
i have been verry stupid and flashed my phone with wm6 for the hurricane..
now it wont even start up and i am already searching for another phone but what i would like to ask.. is it really over now? is there nothing i can do?
i know its verry stupid.. i already updated it to wm6 a few times and it worked exallend.. but i had a rush and din't take a good look..
thank you

supervaags said:
hey all,
i have been verry stupid and flashed my phone with wm6 for the hurricane..
now it wont even start up and i am already searching for another phone but what i would like to ask.. is it really over now? is there nothing i can do?
i know its verry stupid.. i already updated it to wm6 a few times and it worked exallend.. but i had a rush and din't take a good look..
thank you
Click to expand...
Click to collapse
What kind of ROM wm6 for the hurricane are you flashed? If it not containts IPL & SPL for hurricane it is not over now.
Try to downgrade to the original firmware for you platform (TORNADO)
Charge battarey (if phone dont want charge, do it externaly) and enter bootloader by pressing camera button & connect USB

thanks for your respons,
which rom it was i dont really know exactly, what i do know was that it go far to quickley
i can not turn the phone on and even with an external charger it wont work.. i already tryed to access the bootloader but it wont work..
a few minutes after i bricked it i had a white screen.. but that was just for one time..

supervaags said:
thanks for your respons,
which rom it was i dont really know exactly, what i do know was that it go far to quickley
i can not turn the phone on and even with an external charger it wont work.. i already tryed to access the bootloader but it wont work..
a few minutes after i bricked it i had a white screen.. but that was just for one time..
Click to expand...
Click to collapse
Try to charge battarey with external charger (not in phone). Or with orriginal charger, connect it and leave at 6-12 hours.
And when you try to turn on phone ith it have red blinking for a second?
May be that you reflash incorrect botloader (IPL & SPL). I know method how to repair it, but ferst of all check that your battarey ith full charge...

yes exactly, when i have the baterry in the device and i want to turn it on, i flashes verry weak for a moment..
and when i remove the battery and put it into my original charger, it flashes strong for a second when i put the connector in.
so i am correct, that means my battery is empty and i have to find a way to charge it external..
i already have an offer for an another phone, do you think i can repair this one?
and which method do i have to use?
thanks in advance
edit:
with some wires and an another adapter i figered a way out to charge the baterry external..
it would be great if you could help me.

supervaags said:
yes exactly, when i have the baterry in the device and i want to turn it on, i flashes verry weak for a moment..
and when i remove the battery and put it into my original charger, it flashes strong for a second when i put the connector in.
so i am correct, that means my battery is empty and i have to find a way to charge it external..
i already have an offer for an another phone, do you think i can repair this one?
and which method do i have to use?
thanks in advance
edit:
with some wires and an another adapter i figered a way out to charge the baterry external..
it would be great if you could help me.
Click to expand...
Click to collapse
Chek the voltage of baterry ( it must be near 3.7-4.3 v). The easy external charge you can make taking the charger with same V & Am parameters, choping connector and take the choped wires to baterry in right dirrection "+" to "+" & "-" to "-", but this is dangerous way soo if you dont uderstand how to doo this, dont doo it.
But it seems, as when you try to connect orriginal charger there are only blincking for a second and nothing else, that you destroy the bootloader on your phone...
And is this blincking red or orange flash ?

no i realy know what i am doing and i let it charge for a couple of hours but there is no result..
it still doesn't do anything and i know the battery is full now.
when i want to turn it on, it flashes red, so if the bootloader is destroyed that means that he not can be repaired is it?
well.. i already thougd that it was over but now i now it for sure..
thanks for youre help

supervaags said:
no i realy know what i am doing and i let it charge for a couple of hours but there is no result..
it still doesn't do anything and i know the battery is full now.
when i want to turn it on, it flashes red, so if the bootloader is destroyed that means that he not can be repaired is it?
well.. i already thougd that it was over but now i now it for sure..
thanks for youre help
Click to expand...
Click to collapse
I can repair it ( I repaired many devices with same problem), but i am from ukraine, soo i dont know is it possible to send it to me for repeairing, or i can buy it from you for experements in repairing...

i live in holland so that is a bit to far for driving indeed
well, ofcourse i can sent it to you but what does that costs? transport, repairing etc..
or you may buy mines for experimenting and than i buy an another one..
how much would you give for my 8300?
is repairing so difficult that i cant do it my own? or do i need special tools or something?

supervaags said:
i live in holland so that is a bit to far for driving indeed
well, ofcourse i can sent it to you but what does that costs? transport, repairing etc..
or you may buy mines for experimenting and than i buy an another one..
how much would you give for my 8300?
is repairing so difficult that i cant do it my own? or do i need special tools or something?
Click to expand...
Click to collapse
I dont know about shipping cost from you country(you must find out on your post services), for repairing i ask near 20 EUR. And ofcourse shipping by your costs in both sides.
If you want to sell it for me i can give you near 30-35 EUR (it is dependent from accesories and outward appearance).And I pay shipping costs.
Yes for repairing you need special tools (special cable etc.) and wide experience...

oke then i want to sell it to you that makes it a lot easyer, because special tools and experience is not really what i got
i am going to buy a 8310 so i want to keep some accesiores like car holder and stuff.. i can offer you the phone and battery and charger..
so that will be 35 + shipping costs? i will look that up, i dont think that is verry much..
i will sent you a message with my bank acount number and then i would like to know youre adress so i can sent it to you..

supervaags said:
oke then i want to sell it to you that makes it a lot easyer, because special tools and experience is not really what i got
i am going to buy a 8310 so i want to keep some accesiores like car holder and stuff.. i can offer you the phone and battery and charger..
so that will be 35 + shipping costs? i will look that up, i dont think that is verry much..
i will sent you a message with my bank acount number and then i would like to know youre adress so i can sent it to you..
Click to expand...
Click to collapse
Ok 35 EUr + shipping ( tell me how much it cost from your country). I dont need car holder, only base assemblage (battery, charger, USB-cable, package box, and some document)
Next wright me to PM or on my E-mail:[email protected]

Hi,
Now I have the same problem.
I flash my phone (tornado) by guide http://karhoe.net/content/view/35/1/ (I think that is wrong guide for my phone-windows )
I had WM6.1 and I run Patched_RUU and was 100% -> "Once you are done, your phone will reboot, then turn it off."
My phone doesn't want restart (all the time black screen) .
Now doesn't work bootloader and the phone doesn't want turn on.
What can I do to get it to work?
Please help

Nware said:
Hi,
Now I have the same problem.
I flash my phone (tornado) by guide http://karhoe.net/content/view/35/1/ (I think that is wrong guide for my phone-windows )
I had WM6.1 and I run Patched_RUU and was 100% -> "Once you are done, your phone will reboot, then turn it off."
My phone doesn't want restart (all the time black screen) .
Now doesn't work bootloader and the phone doesn't want turn on.
What can I do to get it to work?
Please help
Click to expand...
Click to collapse
This guide right for your phone( i meen the procedure). But if you took the ROM from this guide, you kill bootloader in your phone, becouse (maybe) it including the IPL & SPL for TYPHOON. Wright mee to PM...
And give mee a link dirrectly to the ROM that you flashing...

Nware said:
Hi,
Now I have the same problem.
I flash my phone (tornado) by guide http://karhoe.net/content/view/35/1/ (I think that is wrong guide for my phone-windows )
I had WM6.1 and I run Patched_RUU and was 100% -> "Once you are done, your phone will reboot, then turn it off."
My phone doesn't want restart (all the time black screen) .
Now doesn't work bootloader and the phone doesn't want turn on.
What can I do to get it to work?
Please help
Click to expand...
Click to collapse
do also only see a light flasing wenn you want to turn the phone on?

supervaags said:
do also only see a light flasing wenn you want to turn the phone on?
Click to expand...
Click to collapse
Yes, i see only once red led flashing.
SAXON13, this guide is for my phone but this is guide how upgrade windows from WM5 to WM6. I had WM 6.1 and I just instal new SPL ( this - http://rapidshare.com/files/54057779/IU_SPL_PatchedRUU.zip ).
After process my phone should will reboot, but unless since then he had black screen and i can't turn it on.

Nware said:
Yes, i see only once red led flashing.
SAXON13, this guide is for my phone but this is guide how upgrade windows from WM5 to WM6. I had WM 6.1 and I just instal new SPL ( this - http://rapidshare.com/files/54057779/IU_SPL_PatchedRUU.zip ).
After process my phone should will reboot, but unless since then he had black screen and i can't turn it on.
Click to expand...
Click to collapse
This is for HTC Typhoon/Feelar/Amadeus not for Tornado, so your phone is dead, you flash bootloader from other phone. Wright me to PM

Starting problem

Hello, after screen replacement, mother board flex replacement, when I start the phone I have nothing on the screen running only a red and green light on the top of the phone. I have disconnected the battery and load again but still the same. I tried power and volume down or up but still the same problem. I try with other screen but the problem is still there. Some people can help me in the diag and solution to resove ?
Many thanks for your help

I maybe have the same problem on my BKL-L09, my phone just show the screen a split second and then it is black screen all the time. I started having these problems after I installed the latest magisk (The old v.17). And also, I can get to TWRP anymore, both official and unofficial TWRP. I'm guessing it's the internal partition problem (funkyhuawei's unbrick service shows all the partitions). I guess we just gonna have to wait for the Honor View 10 SP Flash Tool or something... (BTW, I already know the tool : https://forum.xda-developers.com/ho...ol-tool-one-driversunlocktwrpfactory-t3776736 but, it is not supported yet.) I hope someone does it fast and for free if possible, because we're community and if someone is having the same problem, we can easily help them. And that is what community does.

deuxsacsatrois said:
Hello, after screen replacement, mother board flex replacement, when I start the phone I have nothing on the screen running only a red and green light on the top of the phone. I have disconnected the battery and load again but still the same. I tried power and volume down or up but still the same problem. I try with other screen but the problem is still there. Some people can help me in the diag and solution to resove ?
Many thanks for your help
Click to expand...
Click to collapse
bring it back to the person who repaieed it