Related
THIS GUIDE HAS BEEN REDONE. PLEASE VISIT THIS THREAD:
http://forum.xda-developers.com/showthread.php?t=761819
Just reading through the document now, seems the first link, http://www.soft‐go.com/get/Samsung‐Kies_79632.html isn't working. Not sure if the site is just down right now or if there's a mistake.
Rad_Fishy said:
Just reading through the document now, seems the first link, http://www.soft‐go.com/get/Samsung‐Kies_79632.html isn't working. Not sure if the site is just down right now or if there's a mistake.
Click to expand...
Click to collapse
Thank you I didn't actually add that link it was from systoxity, but i will fix it.
nbs11 said:
Thank you I didn't actually add that link it was from systoxity, but i will fix it.
Click to expand...
Click to collapse
I Fixed it
A few small things:
Intel should be intel.
Under CPU Optimization:
"Samsung’s CPU is set by default the run at 1gHz."
The should be to.
Sideloading:
"(don’t forget that after you install it from the market you still have to go to your app drawer and run busybox once so it installs)."
Should this be after you download it from the market?
ClockworkMod Recovery:
"ClockworkMod written for us by a developer that goes by the name of Koush"
Missing is.
"This gent puts a ton of work into helping us captivate owners out"
Replace puts with put and Capitalize Captivate.
Changing Your Messaging Ringtone:
"well the ones that matter anyway.."
Extra period.
Other than that, excellent guide. I'll definitely be using it when my Captivate arrives.
Rad_Fishy said:
A few small things:
Intel should be intel.
Under CPU Optimization:
"Samsung’s CPU is set by default the run at 1gHz."
The should be to.
Sideloading:
"(don’t forget that after you install it from the market you still have to go to your app drawer and run busybox once so it installs)."
Should this be after you download it from the market?
ClockworkMod Recovery:
"ClockworkMod written for us by a developer that goes by the name of Koush"
Missing is.
"This gent puts a ton of work into helping us captivate owners out"
Replace puts with put and Capitalize Captivate.
Changing Your Messaging Ringtone:
"well the ones that matter anyway.."
Extra period.
Other than that, excellent guide. I'll definitely be using it when my Captivate arrives.
Click to expand...
Click to collapse
Thanks! I fixed all those errors but I'm not gonna upload the new version just yet because I will keep finding more errors so it just seems wasteful. I did not actually write most of the guide myself I just formatted it so there may be some mistakes I didn't pick up on.
i used this guide today and it delivered.
orlandoxpolice said:
i used this guide today and it delivered.
Click to expand...
Click to collapse
If there was anything you found difficult or anything you would like to change just tell me and I will add it to tonight's update.
Hi,
Thanks for publishing this. It looks very useful, similar to Energy ROM.. But I am very new to Android phones (trying this on Samsung Captivate from AT&T, bought yesterday). I am running windows 7 ultimate 64bit and I exactly followed this guide. But somehow I am still not able to see the sd card. I tried placing the update.zip at Computer\SGH-I897\Phone and shut down the phone and tried restarting the phone by holding the up/down keys as well as power button. But after selecting reinstall packages it said could not find /sdcard/update.zip.. Pls held. Again very sorry if I did some mistake..
ask_j said:
Hi,
Thanks for publishing this. It looks very useful, similar to Energy ROM.. But I am very new to Android phones (trying this on Samsung Captivate from AT&T, bought yesterday). I am running windows 7 ultimate 64bit and I exactly followed this guide. But somehow I am still not able to see the sd card. I tried placing the update.zip at Computer\SGH-I897\Phone and shut down the phone and tried restarting the phone by holding the up/down keys as well as power button. But after selecting reinstall packages it said could not find /sdcard/update.zip.. Pls held. Again very sorry if I did some mistake..
Click to expand...
Click to collapse
The SD card is simply the root directory of your phone. You do not need to open a folder, it is the highest folder you can place it in. Hope that helps
Somehow it was not able to find the sdcard root. Then I realized that you mentioned something called as Droid Explorer, I searched for it and installed it on my PC. But when I opened Droid Explorer, my device was not recognized, then I clicked on link on the explorer window, upon watching that video I enabled the USB Debugging, then I was able to see my device, then I selected connect to my device. After that I saw an explorer but it had empty root and I was not able to copy anything. There was a menu button at the top row named "Transfer to device or Copy to device" I selected that and selected update.zip file and tried to transfer. Something happened but still explorer was empty. Then from my phone Top slide down menu I selected mount USB storage and I started seeing windows explorer on my PC. Then apart from other folders I could see a folder sd in the root. Then I again put update.zip in the root.
Then followed the restart sequence, this time it found the file but exited after Signal 7. It was trying to asert something but could not find the correct model number I guess. My cell phone's model number is Samsung i897.
Please help
ask_j said:
Somehow it was not able to find the sdcard root. Then I realized that you mentioned something called as Droid Explorer, I searched for it and installed it on my PC. But when I opened Droid Explorer, my device was not recognized, then I clicked on link on the explorer window, upon watching that video I enabled the USB Debugging, then I was able to see my device, then I selected connect to my device. After that I saw an explorer but it had empty root and I was not able to copy anything. There was a menu button at the top row named "Transfer to device or Copy to device" I selected that and selected update.zip file and tried to transfer. Something happened but still explorer was empty. Then from my phone Top slide down menu I selected mount USB storage and I started seeing windows explorer on my PC. Then apart from other folders I could see a folder sd in the root. Then I again put update.zip in the root.
Then followed the restart sequence, this time it found the file but exited after Signal 7. It was trying to asert something but could not find the correct model number I guess. My cell phone's model number is Samsung i897.
Please help
Click to expand...
Click to collapse
I did not write the PC instructions, so I can not help you (I only have a Mac). But the person who did can probably help you his username is systoxity.
Because not enough errors were found to make it worthwhile to update the PDF i will wait till tomorrow to fix the minor errors.
Good source of information
Thank you for putting this together. I am going to sticky this for the time being.
For installing the latest version of busy box, you should include that before the instructions for running titanium backup...the latest version of busybox installed from the market will work with titanium backup so theres no need to have to click the "problems" button...this way you wont have to do the busybox download step twice...should also save a few megs since titanium backup wont have its own copy of busybox installed BTW nice guide
You can also just mount the phone memory using windows explorer and move the file over. I was never able to get droid explorer to transfer the file. It always said it went but then was never there.
Anyway all I did was connected just as I was going to connect to kies but then when windows asked me what I wanted to do I clicked on open file view and dropped updated.zip on my phone.
Only issue that I had with rooting was I accidentally opened the file in windows(winrar). After I moved the file over it found it and attempted to install it but then exited with an error(do not remember exact error), but had to do with mounting. Anyway I re-downloaded file and saw file size was different. After I moved the file over again everything went great. I still haven't removed bloat-ware and such but thats next on the agenda.
Also I was on windows 7 64 bit, saw some other users in other threads saying they had issues connecting the phone. Everything so far has worked great for me
Thank you very much for this handy pdf file!
Somelinks aren't working
First of all I have to say very good guide for noobs!
1. when I downloaded the update.zip folder I didn't work I guess because the name of Samsung captivate is not in the folder or something. So I just downloaded the other file from the forums.
2. Link to CPU optimization doesn't work.
3. I downloaded the droid explorer. It connected to my phone but I was unable to transfer anything. So I just tapped on the USB connected in the notification bar and mounted the phone. This allowed me to use windows explorer to transfer files. I believe one can transfer files by selecting the option of Samsung Kies under USB settings.
I got all your feedback. It will all be corrected by tomorrow night.
Cool guide however the rumor is the GPS only gets turned on when pulling up an App that uses it, so that step in the "battery saving" section might not be necessary.
Also you may want to replace Market Enabler with Market Access. It's a rehash of Market Enabler but also has a Set on Boot option that keeps it persistent versus being reset each time.
You also Might want to add a Tips/Tricks Section..
Here You can put some cool tips like the one i found out about backlight control.
(found here: http://forum.xda-developers.com/showthread.php?t=735394 )
Hello.
I finally got the confidence to load Clockwork.
The first thing I did was boot to the utility and repartition the storage as suggested for TnT lite. No problems there, rebooted and poked around a little. I was surprised how much quicker things were with no other changes.
Then I reconnected to my PC, created a ROMs directory and copied the TnT lite.rar file over.
** Here is my problem **
I disconnected from the PC using the "deactivate USB" button. Opened the ES file explorer and there is no ROMs directory but there are 40+ corrupt files in the SDCard directory.
I'm assuming there is a routine to rebuild or repair the file system? Could someone tell me how I should do this, and if that's not the proper course, what should I do?
***The tablet is functioning fine in all other ways as far as I can tell. I was able to delete all but two of the files. The two remaining, "unable to delete". I was going to continue with the installation of TnT lite but with the file systems integrity in question I wondered if I should wait until I've repair it.***
Thanks in advance,
Neudle
Moved to general
No advice?
No suggestions for repairing the folder?
I noticed that when I hook the tablet to my pc, the device name is now nothing but hieroglyphics in windows explorer. Also the two files that I can't delete which are nothing but garbage.
Is it possible to format the internal sdcard?
Thanks.
**Fixed**
Well that was dumb, I managed to fix it 5 minutes after I posted this. I was poking around in clockwork to see if there was something that looked like it might help. Even though I had already repartitioned I ran the routine again. The corrupt files are gone and now in Win explorer it reads "Removable Disk F:" instead of the hieroglyphics.
Neudle,
I think your experience is one of the strongest points that could be made for everyone installing CWM (ClockWorkMod) on their G-Tablet.
A quick look down through the list reveals many things that make life easier -- backup of the ROM, repartitioning (which usually clears out several problems), mounting the USB sdcard when you have serious problems and need to copy stuff onto the tablet to install, yada, yada, yada.
I maintain a VEGAn TAB tablet and a "stock" tablet (no Tnt, VEGAn, Z, etc.) I have put CWM on both --- and I have spent enough time to known fairly well what CWM will do. Sure has helped with my "playing" with both devices.
Glad you are on track!!! Best wishes....
Rev
Hi,
I just had to format my hard drive and thus lost all my WP7 restore files.
Is there anyway to recover all those file so that I can perform a restore on my phone?
I've tried different data restore softwares, but the files are all messed up and I can't remember which folder to put the files in.
Please help me. Thank you.
That really sucks, but this does raise a pretty good question. Where do the phone restore files save to? And how can somebody make sure their backup is going to transfer to a new HDD?
On Win7, try this:
\AppData\Local\Microsoft\Windows Phone Update\XXX-XXX-XXX\Data
I found 5.8Gb of data in this directory following my upgrade to 7390. This helps explain why the update took nearly an hour to complete...
FWIW, i've moved the data off my pc to another drive and everything functions well. The Zune update page no longers shows the option to restore to the previous update, 7008. Other than that, it all looks normal.
aquanaut88 said:
On Win7, try this:
\AppData\Local\Microsoft\Windows Phone Update\XXX-XXX-XXX\Data
I found 5.8Gb of data in this directory following my upgrade to 7390. This helps explain why the update took nearly an hour to complete...
FWIW, i've moved the data off my pc to another drive and everything functions well. The Zune update page no longers shows the option to restore to the previous update, 7008. Other than that, it all looks normal.
Click to expand...
Click to collapse
Thanks. Can you show me the files and folders contained in that backup?
I wanna try my luck again with this
yea, the other guys are right, I had the same issue but if you follow this you will guarantee that you will find your files
Thanks. But what I need to know is the folders to put my recovered files to
In my case it seems they're here:
C:\Users\your user name here\AppData\Local\Microsoft\Windows Phone Update\xxxxx - xxxxx - xxxxxx - xxxxx\RestorePoint\xxxx-xxxxx-xxxxxx-xxxxx\Data
I hope it helps
If you formatted your Hard Drive after you made your backup, you might be SOL unless you have a backup of your hard drive after you backed up your phone.
If you dont, The only real way is to find a rom for your phone.
The folder would be in...
%LocalAppData%\Microsoft\Windows Phone Update
Hi,
I have searched in the forums but i couldnt find any solution to my problem.
My phone is a LG Optimus 7 unbranded on mango.
I want to backup my phone, update it to the latest rom with tethering enabled and after that i want to restore from backup.
How can i do that?
Thanks in advance!
There is no tool that can do that right now. The backup only happens when a new updates come in and Zune does that. It cannot be done manually.
Thanks for the fast answer!
So do i have to wait for the tethering update to appear in Zune or do i have to flash another firmware?
xtrcentral said:
Thanks for the fast answer!
So do i have to wait for the tethering update to appear in Zune or do i have to flash another firmware?
Click to expand...
Click to collapse
Only Zune will be able to do it. So I guess unless they do you have no choice. And No Firmware can enable it.
wpxbox is actually incorrect, there is a tool to create an image-based backup (like Zune does when updating) on demand. Search the Development and Hacking sub-forum, and you can find it. Note that it requires a program, updatewp.exe, that was once distributed by Microsoft and no longer is, so you'll need to find a copy of it (and the version for that copy must exactly match your Zune version).
However, what you're asking for isn't actually useful anyhow, unless you want to install the update and then immediately remove it. A WP7 backup is really more properly called a restore point - it's a full image of the phone's entire storage, including the parts that are normally read-only (the ROM). Restoring that image overwrites everything, including the ROM. Updates are modifications to the ROM, and restoring a backup will therefore remove the update.
That cleared the things... Thanks.
Thanks for correcting me. Apprciate that.
Yes there is a tool which you can find here but to make it work you need to use Old version of Zune and replace couple of DLL.
I personally have tried it but for some reason it did not work for and hence I was not recommending it. But thats me.
Go ahead and give it a shot to see if it works for you. If yes let me know how you did.
--wpxbox
GoodDayToDie said:
wpxbox is actually incorrect, there is a tool to create an image-based backup (like Zune does when updating) on demand. Search the Development and Hacking sub-forum, and you can find it. Note that it requires a program, updatewp.exe, that was once distributed by Microsoft and no longer is, so you'll need to find a copy of it (and the version for that copy must exactly match your Zune version).
However, what you're asking for isn't actually useful anyhow, unless you want to install the update and then immediately remove it. A WP7 backup is really more properly called a restore point - it's a full image of the phone's entire storage, including the parts that are normally read-only (the ROM). Restoring that image overwrites everything, including the ROM. Updates are modifications to the ROM, and restoring a backup will therefore remove the update.
Click to expand...
Click to collapse
Thanks for providing the direct link. I was able to get it working, although it took a lot of work to find matching versions of the tool installer (v1, not v2) and Zune software. It's possible, though. Take a look at the Backup header in this thread: http://forum.xda-developers.com/showthread.php?t=1271963. It has instructions and links that you may be able to use to make the tool work.
Hi,
I finally poured in one complete day figuring out what was in that thread and made it work. I have written my version of making it work here
And Have also created a Video Demo as a Proof that How I made it work. Any feedback is appreciated.
The video is like 11:28 Minutes long. Where I have :
First showed what is my phone
Then created a Backup
Showed where the backup is actually stored i.e. Zune Default restore point
Reset my Phone
Used the Backup to bring it normal state.
Hey xda. Sorry if this post has been misplaced, but I noticed there is no device forum for the tablet I am asking about today, and that is understandable. My girlfriend recently got an eMatic eGlide Pro II XL tablet for her birthday and it is running Android Ice Cream Sandwich 4.0.3. I noticed that it had a lot of bloatware and no google play store on it, and she wanted the play store, so I rooted the device for her and installed the play store and it works like a charm. The only problem I seem to have run into is this read only folder called "oem". The path for this partition is /oem/ and there are a few bloatware apps in there. For some reason though, I cannot edit or delete anything in that partition as it says it is read only even though i am using the root functions of ES File Explorer. I am able to modify other system apps though root explorer. I even tried using terminal emulator commands to remove the items but it still didn't work. Is there a way I can mount this folder as read/write? If I can, that would be a blessing, as I could delete the crapware that came with the tablet and the old version of YouTube that is buggy and not updateable thanks to being placed in the oem folder. Thanks for reading all this guys, I know it's a wall of text, haha.
Ematic: What is the browser?
What is the browser that is install from factory.. on Ematic devices ..as it is not "Chrome" [It almost looks like Dolphin], when I tried to do a regular .apk install of "Chrome" from the Google store it dies which almost tells me that it need to be pushed into the device. So am I correct that I need to find a downloadable .apk of "Chrome" for Android 4.0.3 ?
bfrench1990 said:
Hey xda. Sorry if this post has been misplaced, but I noticed there is no device forum for the tablet I am asking about today, and that is understandable. My girlfriend recently got an eMatic eGlide Pro II XL tablet for her birthday and it is running Android Ice Cream Sandwich 4.0.3. I noticed that it had a lot of bloatware and no google play store on it, and she wanted the play store, so I rooted the device for her and installed the play store and it works like a charm. The only problem I seem to have run into is this read only folder called "oem". The path for this partition is /oem/ and there are a few bloatware apps in there. For some reason though, I cannot edit or delete anything in that partition as it says it is read only even though i am using the root functions of ES File Explorer. I am able to modify other system apps though root explorer. I even tried using terminal emulator commands to remove the items but it still didn't work. Is there a way I can mount this folder as read/write? If I can, that would be a blessing, as I could delete the crapware that came with the tablet and the old version of YouTube that is buggy and not updateable thanks to being placed in the oem folder. Thanks for reading all this guys, I know it's a wall of text, haha.
Click to expand...
Click to collapse
How did you root the tablet? it seems there are several Ematic tablets being sold at wal-mart and I think people would like to know how you rooted it. (I know I would.)
fsuinnc said:
How did you root the tablet? it seems there are several Ematic tablets being sold at wal-mart and I think people would like to know how you rooted it. (I know I would.)
Click to expand...
Click to collapse
I used a tool called Root with Restore by Bin4ry. It took me a couple times. The first time I did it, all it managed to do was slow the tablet down, then i just performed a factory reset and tried again using the same process until it worked. It didn't take all that long. The hardest part is getting the adb drivers to recognize the tablet. I will attach my adb drivers so you don't have to go through all the rigamarole.
Navigate to wherever your android sdk folder is. Mine is at C:\Program Files (x86)\Android\android-sdk
Within the android-sdk folder, look for extras, then google, then usb_driver. Make a backup of everything in your usb_driver folder, just in case.
Next just extract the contents of the zip I attached to this post. Make sure USB debugging is on, and plug it in. It should be recognized assuming there isn't some other problem i haven't encountered or forgot to mention.
Once your computer recognizes the adb interface for your tablet, use the Root with Restore tool until it works.
bfrench1990 said:
I used a tool called Root with Restore by Bin4ry. It took me a couple times. The first time I did it, all it managed to do was slow the tablet down, then i just performed a factory reset and tried again using the same process until it worked. It didn't take all that long. The hardest part is getting the adb drivers to recognize the tablet. I will attach my adb drivers so you don't have to go through all the rigamarole.
Navigate to wherever your android sdk folder is. Mine is at C:\Program Files (x86)\Android\android-sdk
Within the android-sdk folder, look for extras, then google, then usb_driver. Make a backup of everything in your usb_driver folder, just in case.
Next just extract the contents of the zip I attached to this post. Make sure USB debugging is on, and plug it in. It should be recognized assuming there isn't some other problem i haven't encountered or forgot to mention.
Once your computer recognizes the adb interface for your tablet, use the Root with Restore tool until it works.
Click to expand...
Click to collapse
Thanks, that's great info. I will try it out. (I have a Ematic egs005 7" on it's way to me. they seem to be very cheap right now at under $60)
fsuinnc said:
Thanks, that's great info. I will try it out. (I have a Ematic egs005 7" on it's way to me. they seem to be very cheap right now at under $60)
Click to expand...
Click to collapse
I'll bet that you can get it rooted. You may have to edit those drivers though since I don't think my girlfriend's tablet isn't the same as the one you mentioned.
If the drivers I posted don't work for you, then open up "android_winusb.inf" from that zip file in your favorite text editor.
Somewhere under the "[Google.NTx86]" and "[Google.NTamd64]" sections, add this:
;eMatic egs005
Remember where you put those, cause what goes under those entries is the hardware ID of your tablet. You can get that by going under device manager and right clicking on your tablet, if it is unrecognized it should have a yellow triangle on it or something like that. Go to properties and go to the details tab, then from the drop down menu, select hardware IDs. In my case, two came up. Just pick one. If that one ends up not working later, use the one you didn't try.
Now, your entries should look like this:
;eMatic egs005
%CompositeAdbInterface% = USB_Install, (your hardware ID)
Next, try to update the drivers on your tablet via device manager. Right click on your tablet like we did last time, and click properties. Go to the driver tab, and hit the update driver button. You'll have to manually navigate to where your drivers are. Select the folder where you extracted the zip to (make sure you have the edited file in there!) and follow the procedure to update the driver.
Next, open up an adb window and type in adb devices. If you have something showing up, congrats! You should be able to try the root tool now. As always, be careful!
eglide pro ll xl
I just bought the eglide pro ll xl also. From what I have read and done to my tab so far, it is already rooted from the factory. It sounds like a lot of the ematic tabs are. I've been researching different operating systems to put on my tab but there isn't anything that says it is specifically for mine. They pretty much just list the types of tablets the ROMS will work for. The question I have is what type of tablet is this. Allwinner a10? LY F1? TREQ? I would really like to know this and a good way to back up my current system so if I screw it up I can go back and try again.
-Z
Livinbad said:
I just bought the eglide pro ll xl also. From what I have read and done to my tab so far, it is already rooted from the factory. It sounds like a lot of the ematic tabs are. I've been researching different operating systems to put on my tab but there isn't anything that says it is specifically for mine. They pretty much just list the types of tablets the ROMS will work for. The question I have is what type of tablet is this. Allwinner a10? LY F1? TREQ? I would really like to know this and a good way to back up my current system so if I screw it up I can go back and try again.
-Z
Click to expand...
Click to collapse
I didn't add most of those entries in the drivers file, it originated as a sort of "fix all" driver that was posted on xda to connect many many types of different devices to adb without hassle. I added a few of the entries using the hardware ID method I described above to accommodate some less popular devices that my friends and family asked me to root.
I think I heard talk somewhere about custom roms for the eGlide, but I have no clue how to flash them, and seeing as how that tablet wasn't mine, I did not want to try to flash one and brick it, lol. I couldn't find any recoveries or any other tool to flash things to it. If you do find a way, all I can say is be careful.
As far as backing up goes, root with restore supports unrooting as well. I never performed that function though, since root hasn't done anything bad for the tablets I put them on, haha. I'm not certain there is an easy backup method since as I said a second ago, no custom recoveries. To be safe, I would recommend a factory data reset before attempting any rooting/unrooting of this tablet.
I hope I helped with my feedback.
bfrench1990 said:
I didn't add most of those entries in the drivers file, it originated as a sort of "fix all" driver that was posted on xda to connect many many types of different devices to adb without hassle. I added a few of the entries using the hardware ID method I described above to accommodate some less popular devices that my friends and family asked me to root.
I think I heard talk somewhere about custom roms for the eGlide, but I have no clue how to flash them, and seeing as how that tablet wasn't mine, I did not want to try to flash one and brick it, lol. I couldn't find any recoveries or any other tool to flash things to it. If you do find a way, all I can say is be careful.
As far as backing up goes, root with restore supports unrooting as well. I never performed that function though, since root hasn't done anything bad for the tablets I put them on, haha. I'm not certain there is an easy backup method since as I said a second ago, no custom recoveries. To be safe, I would recommend a factory data reset before attempting any rooting/unrooting of this tablet.
I hope I helped with my feedback.
Click to expand...
Click to collapse
I actually installed CWM 6.0.1.2 by Flowish on to my tab and it works great except for the process he has to get in to the recovery. I have to use the terminal emulator to launch it. That's why I am leery about installing a different ROM. If I can't get the thing to boot up properly I then can't get to the terminal emulator to get to recovery to restore my backup. I'm still searching and learning though. I'll figure it out eventually.
Livinbad said:
I actually installed CWM 6.0.1.2 by Flowish on to my tab and it works great except for the process he has to get in to the recovery. I have to use the terminal emulator to launch it. That's why I am leery about installing a different ROM. If I can't get the thing to boot up properly I then can't get to the terminal emulator to get to recovery to restore my backup. I'm still searching and learning though. I'll figure it out eventually.
Click to expand...
Click to collapse
Check if there's fastboot for this tablet. There's a fastboot command to boot into the recovery. If not, then I would just not flash a Rom